Sony 96946K GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac & NFC User Manual PY7 96946K startup guide

Sony Mobile Communications Inc GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac & NFC PY7 96946K startup guide

Contents

PY7-96946K_startup guide

Download: Sony 96946K GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac & NFC User Manual PY7 96946K startup guide
Mirror Download [FCC.gov]Sony 96946K GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac & NFC User Manual PY7 96946K startup guide
Document ID3107820
Application IDH5ePt+EgkKU0gVgCMPz1xQ==
Document DescriptionPY7-96946K_startup guide
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize64.42kB (805200 bits)
Date Submitted2016-08-23 00:00:00
Date Available2017-02-18 00:00:00
Creation Date2017-12-13 03:18:06
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-12-13 03:18:06
Document TitlePY7-96946K_startup guide
Document CreatorAH Formatter V5.3 MR1 (5,3,2011,0610) for Windows

To insert one nano SIM card and one
memory card
Device basics
12
Transferring contacts and content
microSD
SIM2
SIM1
1 Using your fingernail, drag out the SIM/Memory card
holder.
2 Firmly place the SIM card in the correct orientation in
position (1) as shown in the illustration.
3 Firmly place the memory card in the correct orientation in
position (2) as shown in the illustration.
4 Gently push the holder into the slot until it fits into place.
Warranty, SAR and usage guidelines
For information about warranty, SAR (Specific Absorption
Rate) and safety guidelines, please read the Important
information provided under Settings > About phone > Legal
information on your device.
If you need help to transfer contacts, messages, photos or
other data from an old device to your new device, we
recommend that you use the Xperia™ Transfer application.
Visit www.sonymobile.com/xperiatransfer for more
information.
Startup guide
To view the CE mark and FCC ID
To turn on the device
Charging/Notification light
NFC
Nano SIM/Memory card slot
Power key/Fingerprint sensor
Volume/Zoom key
Camera key
Charger/USB Type-C™ cable port
It is important to use the USB Type-C™ cable (provided)
when charging your device as other types of USB cables
can damage your device. It is recommended to charge the
battery for at least 30 minutes before you turn on the
device for the first time.
1 Press and hold down the power key
until the device
vibrates.
2 Wait a moment for the device to start.
1 Using your fingernail, drag out the nano SIM/Memory card
holder.
2 Drag out the label tray in the same way.
To see the full text of the EU declaration of conformity,
visit: http://www.compliance.sony.de/
To activate the screen
• Briefly press the power key
F8332
To view the regulatory compliance mark
• Open the phone dialer, then enter *#07#.
In addition to using a single SIM card, the combined
SIM/Memory card holder allows you to use either an
additional SIM card or an additional memory card. It is
not possible to use two SIM cards and a memory card at
the same time.
To insert one or two nano SIM cards
microSD
SIM2
SIM1
1 Using your fingernail, drag out the SIM/Memory card
holder.
2 Firmly place the primary SIM card (SIM 1) in the correct
orientation in position (1) as shown in the illustration.
3 Firmly place the additional SIM card (SIM 2) in the
correct orientation in position (2) as shown in the
illustration.
4 Gently push the holder into the slot until it fits into place.
Screen protection
Legal information
Before using your device, remove the protection film by
pulling up on the protruding tab.
It is recommended to protect your device with a Sony
branded screen cover or a protector intended for your
Xperia™ model. The use of third party screen protection
accessories may prevent your device from working correctly
by covering sensors, lenses, speakers, or microphones and
can invalidate the warranty.
Publication number: 1305-1719.1
This Startup guide is published by Sony Mobile Communications Inc. or its local affiliated company, without
any warranty. Improvements and changes to this Startup guide necessitated by typographical errors,
inaccuracies of current information, or improvements to programs and/or equipment, may be made by
Sony Mobile Communications Inc. at any time and without notice. Such changes will, however, be
incorporated into new editions of this Startup guide. All illustrations are for illustration only and may not
accurately depict the actual device.
See regulatory information such as the device CE mark in the relevant label tray in the device.
All product and company names mentioned herein are the trademarks or registered trademarks of their
respective owners. Any rights not expressly granted herein are reserved. Visit www.sonymobile.com/globalen/legal/ for more information.
Manufacturer: Sony Mobile Communications Inc., 4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo,
140-0002 Japan. For EU product compliance: Sony Belgium, bijkantoor van Sony Europe Limited, Da
Vincilaan 7-D1, 1935 Zaventem, Belgium.
© 2016 Sony Mobile Communications Inc. All rights reserved.
Supported frequency bands
Some frequency bands might be turned off in certain markets or by certain operators.
F8332
UMTS HSPA+ 800 (Band VI), 800 (Band XIX), 850 (Band V), 900 (Band VIII), 1700 (Band IV), 1900 (Band II),
2100 (Band I) MHz GSM GPRS/EDGE 850, 900, 1800, 1900 MHz LTE (Bands 1, 2, 3, 4, 5, 7, 8, 12, 13,
17,19, 20, 26, 28, 29, 32, 38, 39, 40, 41) WLAN, 2.4G/5G, NFC
Support for you
Access our support website directly on your device or visit
support.sonymobile.com with any supported browser.
Support options include User guides, downloadable content,
troubleshooting tips and contact information.
Even if you don’t have a network connection, you can
access support contact information on your device.
Depending on the country or region where you purchased
your device, you can find this information directly in the
Support application.
Sony Mobile Communications Inc.
4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo, 140-0002 Japan
To access the Support application
1 From your Home screen, tap
2 Find and tap
For the best support available, we recommend connecting
to the Internet when using the Support application.
1305-1719.1

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Extract
Create Date                     : 2016:08:08 16:57:09+01:00
Modify Date                     : 2016:08:19 16:20:42+09:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Format                          : application/pdf
Creator                         : 
Title                           : 
Creator Tool                    : AH Formatter V5.3 MR1 (5,3,2011,0610) for Windows
Metadata Date                   : 2016:08:19 16:20:42+09:00
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Version ID                      : 1
Document ID                     : uuid:fe759aac-9d91-47cf-b9f7-11948a27bb63
Instance ID                     : uuid:6289624b-c74f-4b11-86a8-4f506d65fa3f
Producer                        : Antenna House PDF Output Library 2.6.0 (Windows)
Trapped                         : False
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PY7-96946K

Navigation menu