Sony A1042062 GSM 850/1900 mobile phone with BT User Manual A7 42P indd

Download:
Mirror Download [FCC.gov]
Document ID	989355
Application ID	JZM1t0iR0uqn7nKt/wUSkw==
Document Description	08 user manual part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	150.24kB (1878018 bits)
Date Submitted	2008-08-25 00:00:00
Date Available	2008-08-25 00:00:00
Creation Date	2008-07-16 01:49:57
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2008-08-08 13:22:30
Document Title	A7 42P.indd
Document Creator	Adobe InDesign CS2 (4.0.5)

Prepare the phone
User guide
Thank you for purchasing the Sony Ericsson K330a.
For additional phone content, go to www.sonyericsson.com/fun.
Register now to get free online storage and special offers at
www.sonyericsson.com/myphone. For product support, go to
www.sonyericsson.com/support.
Prior to use, please see important warranty information and
terms for safe and efficient use separately provided.
SIM and PIN
Instruction symbols
The following instruction symbols appear in this User guide:
> Use the navigation key to scroll and select.
Press the navigation key up.
1 Remove the battery cover.
2 Slide the SIM card into its holder with the contacts facing
down.
To insert the battery
Press the navigation key down.
Press the navigation key to the left.
Press the navigation key to the right.
SIM card
To turn on the phone
1 Press and hold down
2 Enter your PIN if requested. To correct mistakes, select
Delete.
3 Select OK.
4 Select a language.
5 Enter the time and date and select
Save.
To charge the battery
To insert the SIM card
To turn off the phone
• Press and hold down
1 The phone battery is partly charged when you buy it. Connect
the charger to the phone. It takes approximately 2.5 hours
to fully charge the battery.
2 To remove the charger, tilt the plug upwards.
You can use the phone during charging. You can charge
the battery for more or less than 2.5 hours. Interrupted
charging will not damage the battery.
The SIM (Subscriber Identity Module) card, which you
get from your network operator, contains information
about your subscription. Always turn off your phone
and detach the charger before you insert or remove
the SIM card.
You can save contacts on the SIM card before removing
it from your phone. Contacts may also be saved in the
phone memory. See Contacts on page 18.
PIN code
Standby
After you have turned on the phone and entered your PIN, the
name of your operator appears on the screen. This is called
standby. You can now make and receive calls.
Note
Tip
Indicates that a service or function is network- or
subscription-dependent. All menus or functions may
not be available in your phone. Consult your network
operator for more information.
Phone overview
Network coverage
Ear speaker
Battery
status
Keylock
Torch key
You must turn on the phone and be within range of a network.
To navigate the menus
1 From standby select Menu.
2 Press
, ,
and select
a menu.
To answer a call
• Press
The phone is set to silent
The keypad is locked
You have received a text message
To go back one step in the menu
• Select Back.
To return to standby
• Press
An alarm is activated
Battery status
End key,
On/off key
FM radio keys
From standby you can use the navigation keys to go directly
to a function:
• Press
to write a text or picture message.
• Press
to go to the camera.
• Press
to play the FM radio.
• Press
to go to your contacts.
• Press
, then the left soft key to activate torch.
You have received a picture message
= Average network coverage
Call key
These icons may appear on the screen.
Divert calls is activated
= Good network coverage
Soft keys
Calling
You have missed a call
The network bars show the strength of the GSM network in
your area. Try moving to another location if you have trouble
calling and network coverage is poor. No network means you
are not in range of a network.
Screen
Shortcuts
Battery icon. A completely green icon means the battery
is fully charged
Network
coverage
Ongoing call
= The phone battery is fully charged
To lock the keypad
• Press
and select Lock keys.
The loudspeaker is on
= The phone battery is empty
The Bluetooth function is activated
Calendar, Timer, Stopwatch, Calculator,
Games, My files, Torch
Internet
Homepage, Bookmarks, Go to URL,
View, Advanced
FM Radio
Camera
Take pic., Record video, Camera pics,
Videos, Slide show, Settings
Messaging
Write new, Inbox, Call voicemail, Drafts,
Sent messages, Saved msgs, Templates,
Delete messages, Settings, Memory
status
Alarms
Calls
Call list, Time and cost, Call settings
Contacts
View contacts, Find contact, Add
contact, My number, Voicemail, Delete
contacts, Speed dial, Copy contacts,
Send contacts, Settings
Settings
Sound & alerts, Wallpaper, Theme, Time
and date, Language, Bluetooth, Select
network, Internet settings, Advanced,
Phone status
To set the phone to silent
• Press and hold down
To make a call
1 From standby enter the area code and phone number.
2 Press
To end a call
• Press
To make international calls
1 From standby press and hold down
until a + sign
appears on the screen.
2 Enter the country code, area code (without the first zero)
and phone number.
3 Press
You can take pictures and record video clips to view, save
and send. Pictures taken with the camera are saved in Menu
> Camera > Camera pics. The format is JPEG.
To view a missed call
• When Missed call is displayed, select Details. To call back
scroll to the number and press
Pictures downloaded using picture messages, Internet
or Bluetooth are saved in Extras > My files > My pictures.
To reject a call
• Press
Call list
To start the camera and take a picture
1 From standby press
. You can see the subject on the
phone screen.
2 Select Take pic. to take the picture.
3 Select Save or Delete.
To turn off the ringtone when receiving a call
• Select Silent to turn off the ringtone without answering the
call.
To call a number from the call list
1 From standby press
2 Scroll to the name or number and press
To delete a picture
1 From standby select Menu > Camera > Camera pics.
2 Scroll to a picture and select View.
3 Select Options > Delete > Yes.
To turn on the loudspeaker
• Select Turn on speaker.
To delete a number from the call list
1 From standby press
2 Scroll to the name or number and select Options > Delete
> Yes.
Calls to the international emergency number 112 can still
be made, even when the keypad is locked.
You can view information about recent calls.
To change the ear speaker volume during a call
• Press
or
Camera
Do not hold the phone to your ear when using the
loudspeaker. This could damage your hearing.
To unlock the keypad
• Press
and select Unlock.
The FM radio is playing
Silent key
Screen icons
Icon Description
Extras
Some menus and icons in this document may vary depending
on operator, network or subscription.
Stereo handsfree
and battery
charger
connector
You may need a PIN (Personal Identification Number) to activate
the services in your phone. Your PIN is supplied by your network
operator. Each PIN digit appears as *, unless it starts with
emergency number digits, for example, 112 or 911. You can call
an emergency number without entering a PIN.
If you enter the wrong PIN three times in a row, PIN
blocked. Enter PUK provided by your operator.
appears. To unblock it, you need to enter your PUK
(Personal Unblocking Key).
1 Remove the battery cover.
2 Insert the battery with the label side up and the connectors
facing each other.
Do not force the battery cover into place. Slide the battery
cover carefully onto the phone and close it.
Warning
K330a
Menu overview
To send a camera picture as picture message
1 From standby select Menu > Camera > Camera pics.
2 Scroll to a picture and select View.
3 Select Options > Send message > Options > Send
message > To:.
4 Select Enter phone no. or Email address.
5 Select OK > Options > Send message.
See To send an item using Bluetooth on page 31.
To call your voicemail service
• Press and hold down
Messaging
To stop recording
• Press Stop to automatically save the video clip.
The maximum recording time for one clip is 2 minutes.
To view video clips
1 From standby press Menu > Extras > My files > Videos.
2 Select a video clip to Play.
To sent a video clip as picture message
1 From standby press Menu > Extras > My files > Videos.
2 Scoll to a video clip.
3 Select Options > Send message > Options > Send
message > To:.
4 Select Enter phone no. or Email address.
5 Select OK > Options > Send message.
The video clip can also be transferred via Bluetooth.
You must have a service centre number, which is supplied
by your service provider and saved on the SIM card. You
may have to enter the number yourself. See Troubleshooting
on page 36.
See Entering text on page 23.
Picture messages (MMS)
Picture messages can contain text, sound and images. They
are sent using MMS to a mobile phone. You need the correct
Internet settings in your phone to use this function. See Internet
on page 31.
To create a picture message
1 From standby press
2 Select Picture messages > Options and select among the
options to create the message.
To write and send a text message
1 From standby press
2 Select Text message. Write the message and select
Options > Send message.
3 Select an option.
4 Select Send.
To send a picture message
1 When the message is ready, select Options > Send
message > To:.
2 Select Enter phone no. or Email address.
3 Select OK > Options > Send message.
To view a received text message
1 new message Read now? appears. Select View.
2 Select the unread message.
To get delivery status of a sent message
1 From standby select Menu > Messaging > Settings
> Delivery report.
2 Select On. You will be notified when a message has been
successfully delivered.
15
16
See Entering text on page 23.
To call a contact
1 From standby press
2 Select a contact, or enter the first few letters of the contact.
3 Press
To edit a contact
1 From standby press
2 Select a contact.
3 Select Options > Edit.
4 Edit the information and select Options > Save contact.
To add a contact
1 From standby select Menu > Contacts > Add contact.
2 Select Save on SIM or Save in phone.
3 Enter the name and select Options > OK.
4 Scroll to the icon below the name.
5 Enter the number and select OK.
6 Select Save contact.
You can enter the + sign and country code with all
phonebook numbers. They can then be used abroad
or at home. See To make international calls on page 13.
Sending and receiving phones must have subscriptions
that support picture messaging.
To view messages saved in the inbox
• Select Menu > Messaging > Inbox.
You can save contacts in the phone memory or on the SIM
card. You can copy contacts from the phone memory to the
SIM card or from the SIM card to the phone memory.
You can choose which contact information is shown as default.
If Phone contacts is selected as default, your contacts show
all the information saved in the phone. If you select SIM
contacts as default, your contacts show names and numbers
saved on the SIM card.
18
14
FM radio
Calendar
To listen to the FM radio
1 Connect the handsfree to the phone.
2 From standby press
To add an appointment in the Calendar
1 From standby select Menu > Extras > Calendar.
2 Scroll to a date and select Options > Add a note.
3 Enter your details and select Options > OK.
4 To confirm the date and time, select OK.
5 Select if you want a reminder signal:
• Reminder – a reminder signal will sound in immediate
connection with the note.
• Deactivate – no reminder signal.
To control the radio
• Press
or
to search for FM radio channels.
• Press
or
to change the volume.
To save an FM radio channel
• When the FM radio is on, press and hold down
–
The FM radio channel is saved in Options > Channels. You
can save up to 20 preset channels.
To delete a contact
1 From standby press
2 Select a contact.
3 Select Options > Delete contact.
To exit the FM radio
• Select Back or press
To copy all contacts to the SIM card
• From standby select Menu > Contacts > Copy contacts
> Copy all to SIM.
To minimize the FM radio on the screen
• Select Options > Minimize.
• Press
to restore the FM radio on the screen.
To view your own phone number
• From standby select Menu > Contacts > My number.
To turn off the FM radio when minimized
• Press
and select Back.
To edit or delete a note
1 From standby select Menu > Extras > Calendar.
2 Scroll to the day for the note and select Options > View
today. If there is more than one note, scroll to the desired
note.
3 Select Options.
4 Select to Delete or Edit the note.
To view FM radio options
• When the FM radio is on, select Options.
To select contacts view
1 From standby select Menu > Contacts > Settings > View
Contacts.
2 Select an option.
17
13
12
Contacts
Text messages (SMS)
To record a video clip
1 From standby select Menu > Camera > Record video.
2 Select Start to start recording.
11
10
19
20
21
More functions
Voicemail
Alarm
The alarm rings even if the phone is set to silent or turned off.
To set the alarm
1 From standby select Menu > Alarms.
2 Enter the time and select Save.
3 Select an option.
• If Alarm is selected, select an alarm signal.
• If Recurrent alarm is selected, select what day or days the
alarm is going to sound. Scroll to the check boxes and select
Mark or Unmark, then select Done and select an alarm
signal.
You need to keep a handsfree inserted when you select
radio as an alarm signal. The radio will sound through the
loudspeaker.
To turn off the alarm
• When the alarm sounds, select Snooze or Stop.
To set the alarm signal
1 From standby select Menu > Settings > Sound & alerts
> Alarm sound.
2 Select an option.
Entering text
To add items in a text message
• When you write the message, select Options > Add item.
There are two methods you can use to enter text: multitap
or T9™ text input.
To change text input methods
• When you write the message, press and hold down
To add symbols in a text message
• When you write the message, select Options > Add symbol.
To enter text using multitap
• Press
–
until the desired character appears.
• Press
to add a space.
• Press
to enter full stops and commas.
• Press
to shift between upper case and lower case
letters.
• Press
to enter the + sign.
• Press and hold down
–
to enter numbers.
To delete characters
• Select Clear.
To change writing language
• When you write the message, press and hold down
Callers can leave a voicemail message when you can not answer.
You can get your voicemail number from your network operator.
Call waiting
When call waiting is used, you hear a beep if you receive
a second call.
To activate call waiting
• From standby select Menu > Calls > Call settings > Call
waiting > Activate.
Emergency calls
To enter text using T9™ text input
1 Press each key only once, even if the desired letter is not
the first letter on the key. For example, if you want to write
the word “Land”, press
2 If the word shown is the one you want, press
to accept
and add a space. To accept a word without adding a space,
press
. If the word shown is not the one you want, press
or
repeatedly to view alternative words. To accept
a word and add a space, press
. To enter full stops and
commas, press
and then
or
repeatedly.
Multiple calls
Your phone supports international emergency numbers, for
example, 112 and 911. These numbers can normally be used
to make emergency calls in any country, with or without the
SIM card inserted, if a GSM network is within range.
To make an emergency call
• From standby enter 112 (the international emergency
number) and press
To view your local emergency numbers
• From standby select Menu > Calls > Call settings
> Emergency nos.
To answer a second call
• During the call, select Answer. Your ongoing call is put on
hold.
To reject a second call
• During the call, select Busy and continue with the ongoing
call.
To make a second call
1 During the call, select Options > Hold call > Options > Call
contact. Your ongoing call is put on hold.
2 Select View contacts.
3 Scroll to the contact and select Options > Call.
To enter your voicemail number
1 From standby select Menu > Calls > Call settings > Set up
voicem. > OK.
2 Select Voicemail no. and enter the voicemail number that
you get from your service provider.
3 Select Save.
To call your voicemail service
• From standby press and hold down
To check your voicemail number
• From standby select Menu > Contacts > Voicemail.
Ringtones and themes
Themes are used to change the appearance of the screen.
To select a ringtone
• From standby select Menu > Settings > Sound & alerts
> Ringtone and select a ringtone.
To set the ring volume
• From standby select Menu > Settings > Sound & alerts
> Ring volume and select an option.
To set the vibrating alert
• From standby select Menu > Settings > Sound & alerts
> Vibration and select an option.
To select a key sound
• From standby select Menu > Settings > Sound & alerts
> Key sound and select an option.
Time and date
To set the time
1 From standby select Menu > Settings > Time and date
> Time > Set time.
2 Enter the time and select Save.
To set the time format
• From standby select Menu > Settings > Time and date
> Time > Time format and select an option.
To select a theme
• From standby select Menu > Settings > Theme and select
a theme.
To set the date
1 From standby select Menu > Settings > Time and date
> Date > Set date.
2 Enter the date and select Save.
To use a picture taken with the camera as wallpaper
1 From standby select Menu > Camera > Camera pics.
2 Scroll to a picture and select View.
3 Select Options > Set wallpaper.
To set the date format
• From standby select Menu > Settings > Time and date
> Date > Date format and select an option.
To switch between two calls
• During the call, select Switch.
To join two calls
• During the call, select Options > Join calls.
To end both calls
• Press
twice.
23
22
25
24
27
26
28
Locks
Bluetooth™ wireless technology
Bluetooth™ wireless technology makes wireless connection
to other Bluetooth devices, for example, a Bluetooth headset,
possible. You can:
1 Connect to several devices at the same time.
2 Exchange items.
The recommended maximum distance between two
Bluetooth devices is 10 metres (33 feet), with no solid
objects in between.
To turn on the Bluetooth function
• From standby select Menu > Settings > Bluetooth
> Turn on.
Please check if local laws or regulations restrict the use
of Bluetooth wireless technology. If it is not allowed, you
must ensure that the Bluetooth function is turned off.
To show or hide your phone
• From standby select Menu > Settings > Bluetooth
> Visibility > Show phone or Hide phone.
If set to hide, other devices will not be able to identify your
phone using Bluetooth wireless technology.
To pair a device with your phone
1 From standby select Menu > Settings > Bluetooth > My
devices > New device to search for available devices.
2 Select a device from the list. Enter a passcode, if required.
To pair your phone with a Bluetooth handsfree
1 From standby select Menu > Settings > Bluetooth
> Handsfree.
2 Select Yes if you are adding a Bluetooth handsfree for the
first time or select Handsfree > My handsfree > New
handsfree if you are pairing with another Bluetooth handsfree.
Make sure that your handsfree is ready to be paired.
To receive an item
1 From standby select Menu > Settings > Bluetooth
> Visibility > Show phone.
2 When you receive an item follow the instructions that
appear.
To select an Internet profile
• From standby select Menu > Settings > Internet settings
> Internet profile. Select a profile.
To send an item using Bluetooth
1 From standby select, for example, select Menu > Camera
> Camera pics.
2 Scroll to a picture and select View.
3 Select Options > Via Bluetooth.
Internet
You need the correct Internet settings in your phone. If settings
are not in your phone, you can:
1 Get them in a text message from the network operator.
2 On a computer, go to www.sonyericsson.com/support and
request a text message with the settings.
To start browsing
• From standby select Menu > Internet and select an option:
Homepage – go to the predefined homepage.
Bookmarks – go directly to a saved Web page.
Go to URL – go to predefined pages or bookmarks, enter
a Web address or show previously visited pages.
View – select full screen or text only.
Advanced – select options such as show pictures, allow
cookies, clear cookies, clear cache and status.
To stop browsing
• When you browse, press and hold down Back.
SIM card lock
The SIM card lock protects your subscription, but not your
phone itself, from unauthorized use. If you change SIM cards,
the phone still works with the new SIM card. Most SIM cards
are locked at the time of purchase. If the SIM card lock is on,
you have to enter a PIN (Personal Identity Number) every time
you turn on your phone. If you enter your PIN incorrectly three
times in a row, the SIM card is blocked. This is indicated by the
message PIN blocked. Enter PUK provided by your operator.
To unblock it, enter your PUK (Personal Unblocking Key). Your
PIN and PUK are supplied by your network operator.
If the message Wrong code. Attempts remaining:
appears when you edit your PIN, you entered the PIN
or PIN2 incorrectly.
To unblock your SIM card
1 When PIN blocked. Enter PUK provided by your operator.
is displayed, enter your PUK and select OK.
2 Enter a new PIN and select OK.
3 Re-enter the new PIN to confirm and select OK.
31
30
Troubleshooting
Memory capacity and speed
If you have not restarted the phone for a while, you may
experience problems with its memory capacity and speed.
You can restart the phone to improve its capacity.
1 Turn the phone off and remove the battery cover.
2 Remove the phone battery and then put it back in place.
3 Replace the battery cover and turn the phone on.
Master reset
If you experience problems with your phone such as screen
flickering or freezing and navigation problems you should reset
the phone.
• From standby select Menu > Settings > Advanced
> Master reset and select an option.
Reset settings will reset all changes that you have made
in your phone to default.
Reset all will delete all user data such as contacts,
messages, pictures and sounds in your phone.
Sony Ericsson Mobile Communications AB
SE-221 88 Lund, Sweden
1214-7648.2
Printed in XXXX
To edit your phone lock code
1 From standby select Menu > Settings > Advanced
> Security > Phone lock > Change code.
2 Enter the current code and select OK.
3 Enter a new code and select OK.
4 Re-enter the new code to confirm and select OK.
If you forget your new code, you have to take your phone
to your local Sony Ericsson retailer.
To edit your PIN2
1 From standby select Menu > Settings > Advanced
> Security > SIM lock > Change PIN2.
2 Enter your PIN2 and select OK.
3 Enter a new PIN2 and select OK.
4 Re-enter the new PIN2 to confirm and select OK.
The phone lock protects the phone against unauthorized use
if it is stolen and the SIM card is exchanged. You can change
the phone lock code (which is 0000 by default) to any four-digit
personal code.
If the phone lock is set to Automatic, you do not need to enter
your phone lock code until a different SIM card is inserted in the
phone.
34
To unlock the phone
1 From standby select Menu > Settings > Advanced
> Security > Phone lock > Protection > Off.
2 Enter your phone lock code and select OK.
35
Declaration of conformity for K330a
Some problems require that you call your service provider, but
you can correct most problems yourself. Remove the SIM card
before handing your phone in for repair.
www.sonyericsson.com
33
32
To turn on the phone lock
1 From standby select Menu > Settings > Advanced
> Security > Phone lock > Protection > On.
2 Enter the phone lock code and select OK.
Phone lock
To turn on the SIM card lock
1 From standby select Menu > Settings > Advanced
> Security > SIM lock > Protection > On.
2 Enter your PIN and select OK.
29
To edit your PIN
1 From standby select Menu > Settings > Advanced
> Security > SIM lock > Change PIN.
2 Enter your PIN and select OK.
3 Enter a new PIN and select OK.
4 Re-enter the new PIN to confirm and select OK.
36
I cannot turn on the phone, what should I do?
Try charging the phone until it has finished charging. Attach
the charger (make sure the power icon on the charger is facing
upwards) and charge the phone for 2.5 hours. The battery icon
on the screen may not appear until the phone has charged for
30 minutes.
What is my phone lock code?
A phone lock protects your phone against unauthorized use.
If a different SIM card is inserted in the phone, the phone lock
code has to be entered. The default phone lock code is 0000.
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
SE-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony Ericsson type AAA-1042062-BV
and in combination with our accessories, to which this declaration relates
is in conformity with the appropriate standards EN 301 511:V9.0.2,
EN 300 328:V1.7.1, EN 301 489-7:V1.3.1, EN 301 489-17:V1.2.1 and
EN 60950-1:2006, following the provisions of, Radio Equipment and
Telecommunication Terminal Equipment Directive 1999/5/EC.
Lund, May 2008
Industry Canada Statement
This device complies with RSS-210 of Industry Canada. Operation is subject
to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
What do these error messages mean?
PIN blocked
You have entered the wrong PIN code three times. Your SIM
is now locked. Unlock your SIM with your PUK code, which
is provided together with your PIN code by your network
operator.
1 Enter your PUK code and select OK.
2 Enter a new PIN and select OK.
3 Re-enter the new PIN to confirm and select OK.
Insert SIM card
Your SIM card is not inserted correctly or may be damaged
or dirty. Try one or more of the following:
• Remove the SIM card and insert it correctly.
• Clean the connectors on the SIM card and phone with a soft
brush, a cloth or a cotton bud.
• Check if the SIM card is damaged.
• Contact your network operator to get a new SIM card.
37
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Shoji Nemoto, Head of Product Business Group GSM/UMTS
We fulfill the requirements of the R&TTE
Directive (1999/5/EC).
Sony Ericsson K330a
FCC Statement
This device complies with Part 15 of the FCC rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Any change or modification not expressly approved by Sony Ericsson
may void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable AAA-1002062-BV protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications.
38
GSM 850/1900
This User guide is published by Sony Ericsson Mobile Communications
AB or its local affiliated company, without any warranty. Improvements
and changes to this User guide necessitated by typographical errors,
inaccuracies of current information, or improvements to programs and/or
equipment, may be made by Sony Ericsson Mobile Communications AB
at any time and without notice. Such changes will, however, be incorporated
into new editions of this User guide.
All rights reserved.
© Sony Ericsson Mobile Communications AB, 2008
Please note: Some of the services in this User guide are not supported
by all networks. This also applies to the GSM International Emergency
Number 112. Please contact your network operator or service provider
if you are in doubt whether you can use a particular service or not. Please
read the Important information before you use your mobile phone.
39
All illustrations are for illustration only and may not accurately depict the
actual phone.
Your mobile phone has the capability to download, store and forward
additional content, e.g. ringtones. The use of such content may be restricted
or prohibited by rights of third parties, including but not limited to restriction
under applicable copyright laws. You, and not Sony Ericsson, are entirely
responsible for additional content that you download to or forward from
your mobile phone. Prior to your use of any additional content, please
verify that your intended use is properly licensed or is otherwise authorized.
Sony Ericsson does not guarantee the accuracy, integrity or quality of any
additional content or any other third party content. Under no circumstances
will Sony Ericsson be liable in any way for your improper use of additional
content or other third party content.
Sony is a trademark or registered trademark of Sony Corporation.
Ericsson is a trademark or registered trademark of Telefonaktiebolaget
LM Ericsson. The Predictive Text Technology is used under license from
Zi Corporation. The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sony Ericsson is under
license. The Liquid Identity logo is trademark or registered trademark of
Sony Ericsson Mobile Communications AB. Java™ and all Java-based
trademarks and logos are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other countries.
1. Restrictions: Software is confidential copyrighted information of Sun
and title to all copies is retained by Sun and/or its licensors. Customer
shall not modify, decompile, disassemble, decrypt, extract, or otherwise
reverse engineer Software. Software may not be leased, assigned, or
sublicensed, in whole or in part.
40
2. Export Regulations: Software, including technical data, is subject to
U.S. export control laws, including the U.S. Export Administration Act
and its associated regulations, and may be subject to export or import
regulations in other countries. Customer agrees to comply strictly with all
such regulations and acknowledges that it has the responsibility to obtain
licenses to export, reexport, or import Software. Software may not be
downloaded, or otherwise exported or re-exported (i) into, or to a national
or resident of, Cuba, Iraq, Iran, North Korea, Libya, Sudan, Syria (as such
listing may be revised from time to time) or any country to which the U.S.
has embargoed goods; or (ii) to anyone on the U.S. Treasury Department’s
list of Specially Designated Nations or the U.S. Commerce Department’s
Table of Denial Orders. Restricted Rights: Use, duplication or disclosure
by the United States government is subject to the restrictions as set forth
in the Rights in Technical Data and Computer Software Clauses in DFARS
252.227-7013(c) (1) (ii) and FAR 52.227-19(c) (2) as applicable.
All other trademarks and copyrights are the property of their respective
owners.
Any rights not expressly granted herein are reserved.
41

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Instance ID                     : uuid:ae1eb161-68d5-47ff-9993-6b0ee252daa2
Document ID                     : adobe:docid:indd:d872507e-2dbe-11dc-8671-bfb553f90c14
Rendition Class                 : proof:pdf
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975, uuid:174ba125-1ded-4525-919e-f0991a3d3975
Manifest Reference Document ID  : uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c, uuid:b81174fc-ee5c-4f86-b813-2bc691bc9c9c
Create Date                     : 2008:07:16 01:49:57+08:00
Modify Date                     : 2008:08:08 13:22:30+02:00
Metadata Date                   : 2008:08:08 13:22:30+02:00
Creator Tool                    : Adobe InDesign CS2 (4.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 12596 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : A7 42P.indd
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0.5)

EXIF Metadata provided by EXIF.tools