Sony A3624011 Licensed transmitter User Manual

Sony Mobile Communications Inc Licensed transmitter

08 user guide part 2

Download: Sony A3624011 Licensed transmitter User Manual
Mirror Download [FCC.gov]Sony A3624011 Licensed transmitter User Manual
Document ID862861
Application IDz7R13yUBGSazxHoBZ1Ek3g==
Document Description08 user guide part 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize206.12kB (2576481 bits)
Date Submitted2007-11-01 00:00:00
Date Available2007-12-16 00:00:00
Creation Date2007-10-23 09:02:19
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2007-10-23 09:03:20
Document Titleuntitled

● You can also set a timer for watching/recording a program
using a program information provided by the program
guide i-αppli, site, mail, etc.
● If the Alarm, Schedule alarm, and Booking alarm are set to
start at the same time, the following priority is applied.
1. Schedule alarm
2. Booking alarm
3. Alarm
● If there is a timer that is set to start at the same time as the
new timer for recording a program, the confirmation screen
appears. If you select [Yes], the previously saved timer for
recording a program is overwritten by the new one.
● When the ending or starting date and time set for the
previously saved timer for recording a program is the same
as the starting or ending date and time set for the newly
saved one respectively, the confirmation screen appears.
If you select [Yes], the preceding timer terminates slightly
earlier than the specified time.
● If the Booking list is updated because of the saved
reservation being started while editing a reservation
or other reason, the reservation may not be saved
successfully.
● If the repeat type of the schedule set for the 31st is set to
[Month], the schedule is set for the last day of the month
for months with less than 31 days.
At the Booking Alarm Time
The alarm tone sounds for about 30 seconds with the
indicator flashing.
Ｂｏｏｋｉｎｇ ａｌａｒｍ
To stop the alarm tone
Press any key. When you stop the alarm tone, the
display informing the release of the alarm appears. To
turn off the display, press
(OK) or
When you do not stop the alarm tone
The display informing the release of the alarm appears.
To turn off the display, press
(OK) or
When the Cfm. activation is set to [ON]
After you turn off the display informing the release of the
alarm, the Cfm. activation display appears. Select [Yes]
to activate One Seg.
When the Cfm. activation is set to [OFF]
Press
for over a second to activate One Seg.
At the Timer Recording Starting Time
One Seg
１８：００
○○テレビ
明日の天気
ＯＮ
３０ｓｅｃ．ｂｅｆｏｒｅ
Ｅｙｄ
１０ Ｃｏｕｎｔ
● If you set an i-motion with video and sound tracks to the
alarm tone, a movie in the i-motion is displayed.
● If the alarm time comes during a voice/videophone call or
PushTalk communication, the default alarm tone sounds
and default alarm image is displayed. The vibrator does
not operate.
● The Booking alarm does not operate in the following
cases.
- When the FOMA terminal is powered off
- While the Lock all is set
- While the Personal data lock is set
- While the Omakase Lock is set
- While updating the software
● If the alarm time comes in the following cases, the alarm
may operate when the status changes to during a call or
stand-by.
- While placing/receiving a voice/videophone call or
originating/receiving a PushTalk call
- During packet communication
- During the infrared communication/while the infrared
remote control is being used
- During the iC communication
- During data communication or while reading/writing
data from/into a microSD memory card on a PC with the
FOMA terminal connected using the USB cable
- While recording a still image/movie
- While the Schedule alarm is sounding
- Beep while receiving Area Mail, while sounding Area
Mail ring tone, or displaying Area Mail
● If you leave the FOMA terminal with the battery pack
removed or fully expended for a long period of time, the
date and time is reset, and the Booking alarm may not
operate correctly.
A recording is automatically started. When the timer
for recording a program starts while One Seg is
not activated, “ ” appears. After the recording is
completed, the notification icon “ ” (Timer Rec result)
appears in the stand-by display.
ˎ Extend the One Seg Antenna fully while recording a program.
Ｔｉｍｅｒ Ｒｅｃ ｒｅｓｕｌｔ
１
To check the reservation result
Press
(Link) in the stand-by display and select “
”.
○ △ の不思議
毎週木曜よる１０時∼
第２２５回
ペンギンの一生
■豆知識
■クイズ
■撮影裏話
■次回予告
○ × ｃｈ ○ △ の不思議
Ｐｒｅｐａｒｉｎｇ ｔｏ Ｒｅｃ
Continued
249
When the timer recording star ting time comes while
watching One Seg
The Preparing to Rec display appears. To cancel
recording, press
and select [Yes].
To cancel the recording during timer recording
Press
while recording and select [Yes].
One Seg
● Even if the Dur multitask Rec is set to [Prefer recording],
the timer for recording a program may be canceled in a
case such as when there are too many active functions or
there is not enough memory. Also, while transferring data
to the microSD memory card, the recording does not start.
● If the Dur multitask Rec is set to [Prefer operat.] and when
functions that cannot be run simultaneously are active, the
screen for confirming whether to start the timer recording
appears. When you select [Yes], the timer recording starts.
However, regardless of selecting [Yes] on the confirmation
screen, the timer for recording a program may not start in
a case such as when there are too many active functions
or there is not enough memory.
● Even if the FOMA terminal is outside of the broadcast
service area when the timer recording starting time comes,
the timer recording works effectively.
However, the timer recording fails if the FOMA terminal is
outside of the broadcast service area all the time from the
beginning to the end of the scheduled recording time. The
message “Could not receive broadcast wave” appears in
the Result detail display (P.251).
● Timer recording does not start in the following cases.
- When the FOMA terminal is powered off
- When the UIM is not inserted
- While the Lock all is set
- While the Personal data lock is set
- While the Omakase Lock is set
- During packet communication
- During 64K data communication
- During the infrared communication
- During the iC communication
- While using the Data Security Service
- While updating the software
ˎ You can set the following files. You can select a ChakuUta® from [i-motion].
Category
MUSIC※
i-motion※
Melody
Press
(Func) in the Res. data list display.
The Function menu appears.
Select [Booking ALM set] and press
Ａｌａｒｍ ｓｅｔｔｉｎｇ
Ａｌａｒｍ ｔｏｎｅ
Ａｌａｒｍ（ｓｔｄ）
Ａｌａｒｍ ｉｍａｇｅ
視聴予約アラーム鳴動
Ａｌａｒｍ ｖｏｌｕｍｅ
４
ＯＦＦ
Ｖｉｂｒａｔｏｒ
Ｃｏｌｏｒ
Ｃ５
250
File
File size
Image size
format
AAC-LC/ Max. 5M
−
HE-AAC bytes
MP4
Max. 10M Max. [VGA(640×
bytes
480)]
SMF/
Max. 350K
−
MFi
bytes
※ Some files may not be set.
When you select a Chaku-Uta Full® that has a choice of
specified playback ranges from [MUSIC]
The screen for selecting a type of setting appears. If you
select [Full song], the whole track of Chaku-Uta Full® is
set for the alarm tone. If you select [Point], the specified
playback range of Chaku-Uta Full® is set for the alarm
tone.
To mute the alarm tone
Select [Silent].
To check the alarm tone
Move the cursor to the alarm tone and press
(Play).
Select an image from My picture/i-motion of the
Data Box at [Alarm image].
ˎ You can set the following files.
Category
My picture
i-motion※
File
File size
Image size
format
GIF/
Max. 250K Max. [Stand-by(480
JPEG bytes
×864)], Max. W480
×H288 for GIF
animation
SWF
Max. 100K
−
bytes
MP4
Max. 10M Max. [VGA(640×
bytes
480)]
※ Some i-motion may not be set.
To check the alarm image
Move the cursor to the alarm image and press
Setting the Operation for the Booking
Alarm
You can set the detailed operation for the Booking
alarm.
Select an alarm tone from MUSIC/i-motion/Melody
of the Data Box at [Alarm tone].
Set the volume at [Alarm volume].
Select from [OFF] and [1 to 6].
To set the volume to [OFF]
Press
at level 1.
(Play).
6
Select a vibration type at [Vibrator].
[Pattern1]:
Set short intermittent vibration.
[Pattern2]:
Set long intermittent vibration.
[Link melody]:
Vibrates in accordance with the alarm tone. If you have
set the alarm tone to [Silent] or to a melody that cannot
be synchronized with the vibrator operation, the vibrator
vibrates using [Pattern1].
[OFF]:
Do not set the vibrator.
To check the vibration
Move the cursor to the pattern and press
(Confirm).
Using Data Broadcasting
One Seg allows you to use the data broadcasting in
addition to the video and sound broadcasting. Various
kinds of information including still images and movies,
such as sites linked with programs are available.
ˎ You cannot display the data broadcasting in the TV style.
ˎ During the data broadcasting mode, you cannot select a
broadcast station.
Press
(TV/DATA) while watching One Seg.
“ ” appears and the mode is switched to the data
broadcasting mode.
Half-screen display
Full-screen display
Select an indicator color at [Color].
○ △ の不思議
毎週木曜よる１０時∼
Select from 12 indicator colors or [C13:ALL] (indicator
flashes in 12 colors in sequence).
When you move the cursor, the indicator flashes accordingly.
Press
第２２５回
ペンギンの一生
● When you set an i-motion or Chaku-Uta Full® for the alarm
tone or set an i-motion for the alarm image, the settings
may be changed in some cases.
(Res.Rslt) in the Res. data list display.
Ｒｓｒｖ ｒｓｌｔ ｌｉｓｔ
１／２
最新情報
To delete a reservation result
Move the cursor to a reservation result and from the
Function menu, select [Delete one] → [Yes]. To delete
all reservation results, from the Function menu, select
[Delete all], enter the Security code, and select [Yes].
Select a reservation result and press
●ドラマ
●ニュース・ドキュメンタリー
●バラエティ
●スポーツ
○ × ｃｈ ○ △ の不思議
Ｒｅｃ
Select an item and press
One Seg
２００７／１１／２８ Ｗｅｄ１８：００
○○テレビ
明日の天気
２００７／１１／２９ Ｔｈｕ２１：００
△△ テレビ
今日のニュース
第２２５回
ペンギンの一生
To go back to the video mode
Press
(TV/DATA). Every time you press , the mode
is switched between the video and data broadcasting
modes.
To switch the data broadcasting screen between half and
full screens
Press
(TV/DATA) for over a second during the data
broadcasting mode. Every time you press
for over
a second, the screen is switched between half and full
screens.
To display the certificate
From the Function menu, select [Certificates].
To reload the data broadcasting site
From the Function menu, select [Reload].
To go back to the data broadcasting from the data
broadcasting site
From the Function menu, select [Back to data BC.].
Up to 30 results of Timer recording can be saved.
Press
■豆知識
■クイズ
■撮影裏話
■次回予告
■豆知識
■クイズ
■撮影裏話
■次回予告
○ × ｃｈ ○ △ の不思議
Ｒｅｃ
Checking the Reservation Result
○ △ の不思議
毎週木曜よる１０時∼
(Complete).
The operation for the Booking alarm is set.
Ｒｅｓｕｌｔ ｄｅｔａｉｌ
［Ｒｅｓｕｌｔ］
Ｔｉｍｅｒ ｒｅｃｏｒｄｉｎｇ
ｆｉｎｉｓｈｅｄ ｃｏｍｐｌｅｔｅｌｙ
２００７／１１／２８ Ｗｅｄ
１８：００
２００７／１１／２８ Ｗｅｄ
２０：００
○○テレビ
明日の天気
Ｅｙｄ
１０ Ｃｏｕｎｔ
Ｔｏ ２００７／１２／０７
● W h e n y o u a c c e s s a n i - m o d e s i t e f ro m t h e d a t a
broadcasting, the site is displayed in full-screen and the
video and sound of One Seg are not output.
● If you select [Yes] on the screen for confirming whether
to connect to i-mode that appears while using data
broadcasting or data broadcasting site, the FOMA
terminal connects to i-mode. If you select [Yes,from then
on], the confirmation screen no longer appears. The
packet communication charge may be required because
of contents of data broadcasting or data broadcasting site
being updated automatically. To display the confirmation
screen again, perform the Rset permission set (P.256).
● The packet communication performed when connecting to
a data broadcasting site is covered by the Pake-Houdai/
Pake-Houdai Full service.
● For the operation while the site is displayed, follow the
same steps as in “Using Sites” (P.162). You cannot enter
pictographs in the text box while in a data broadcasting or
data broadcasting site.
Continued
251
Using Displayed Information
Some data broadcasting or data broadcasting sites
allow you to use displayed information to activate
Phone To, Mail To, or i-αppli To function, download
ToruCa cards, and save entries in the Phonebook or
Schedule.
Using TVlink

D e p e n d i n g o n t h e d a t a b ro a d c a s t i n g o r d a t a
broadcasting sites, you can save a URL or memo
information as a TV link. Once the frequently used site
or memo information is saved as a TV link, you can
display a desired site or memo information directly.
Saving as a TV link
Select an item that can be saved as a TV link and
press
Select [Yes] and press
ˎ The copy control signal (indicating that “the program cannot
be recorded (Copy Never)”, “the program can be recorded
only once (Copy Once)”, or “the program can be recorded
without restrictions (Copy Free)”) is placed in One Seg. They
are set by each broadcast station.
ˎ If the copy control signal of a program is one of “the program
can be recorded only once (Copy Once)” and “the program
can be recorded without restrictions (Copy Free)”, the
program can be recorded.
ˎ When the copy control signal changes to “the program cannot
be recorded (Copy Never)” while recording a program, the
recording stops. Video data recorded up to that point is
saved.
A recorded video is saved in either the [Video] folder in
1Seg of the Data Box or in 1Seg of a microSD memory
card.
■ Estimated number and recording time of videos you
can record
The TV link is saved.
Displaying the Saved TV link
One Seg
From the Menu, select [1 Seg] → [TVlink] and
press
ＴＶｌｉｎｋ ｌｉｓｔ
You can save a program as a video and a scene of a
program as a still image while watching One Seg.
Recording a Video
ˎ You can save up to 50 TV links.
Recording One Seg While
Watching

１／４
○○番組
□ △ ズーム
○ △ 入門
△△ 発見
ˎ The following icons show the type of TV link
Data broadcasting site
i-mode site
Estimated max. Estimated max.
number＊1
recording time＊2
Data Box
99 items
About 30 minutes
microSD memory card 99 items
About 10 hours
(2GB)
43 minutes
Place to save to
＊1 Depending on the data size, the number of videos you
can save may decrease.
＊2 The recording times are estimated values. They vary
depending on the contents of a program to be recorded.
ˎ To set a place to save a recording video, see “Setting a
Place to Save a Recorded Video to” (P.255).
Memo information
Select a TV link and press
The selected TV link is displayed.
When the screen for confirming whether to connect to the
i-mode appears
Select [Yes].
252
for over a second while watching One
The display is switched to the Preparing to Rec display.
After time for preparation, recording starts and “
”
appears.
TV link with expiration date set
To display the detailed information of a TV link
Move the cursor to a TV link and press
(Detail).
To delete a TV link
Move the cursor to a TV link and from the Function
menu, select [Delete one] → [Yes]. To delete all TV links,
from the Function menu, select [Delete all], enter the
Security code, and select [Yes].
Press
Seg.
To stop recording, press
press
, select [Yes], and
The recording is stopped and a video is saved.
ˎ To play back a saved video, see “Displaying/Playing
Back One Seg” (P.277).
For the TV style
Press
, select [Yes], and press
● A file name of a recorded video appears in the format
of the recorded year, month, date, hour, and minute. For
example, when a video is recorded at November 1, 2007,
9:05, it appears as “200711010905NNN”. A number “000
to 999” is assigned to “NNN”.
● You cannot set a recorded video for the stand-by display,
ring tone, incoming image, etc.
● When the Rec T.shift now/Play T.shift now is activated, you
cannot start recording a program.
● You cannot start recording a video while the FOMA
terminal is outside of the broadcast service area.
● Recorded video can only be moved from the Data Box
to the microSD memory card. A video cannot be moved/
copied from the microSD memory card to the Data Box.
● If the free space of the storage area is being decreased
during recording, the message informing that there is not
enough space appears and the recording ends. The video
recorded up to this point is saved.
Recording a Still Image
You can save up to 50 recorded still images.
Press
while watching One Seg.
A still image is recorded and saved automatically.
ˎ A One Seg recorded still image cannot be saved in the
microSD memory card.
ˎ To play back a saved still image, see “Displaying/Playing
Back One Seg” (P.277).
Starting Time Shift Play While
Watching
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2007:10:23 09:03:20+02:00
Create Date                     : 2007:10:23 09:02:19+02:00
Metadata Date                   : 2007:10:23 09:03:20+02:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:f0e955c3-60a7-4b98-ae5f-21d17d2b21ac
Instance ID                     : uuid:e74be669-7b52-4a9a-b0c8-a591f9e8f816
Producer                        : Acrobat Distiller 7.0 (Windows)
Page Count                      : 186
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PY7A3624011

Navigation menu