Sony AAB-1021011 Licensed Transmitter User Manual T610UG R6A

Sony Mobile Communications Inc Licensed Transmitter T610UG R6A

UserManual.wiki >

AAB-1021011 User Manual >

Exhibit 8 User Manual revised

Contents

1. Exhibit 8 User Manual
2. Exhibit 8 User Manual revised

Exhibit 8 User Manual revised

This is the Internet version of the user's guide. © Print only for private use.Contents 1ContentsGetting to know your phone 4Key functions, quick keys, entering letters.Personalizing your phone 16Downloading settings or choose from the phone.Calling 23Using the Phonebook, voice control, call options.Messaging 42Multimedia messaging, chat and email.Camera 50Using the camera.Setting up WAP and email 53All you need to know about setting up WAP and email.Using WAP 60WAP browser, bookmarks.Transferring and exchanging information 63 Bluetooth wireless technology, synchronization.More features 67Calendar, alarm clock, stopwatch, timer, games.Security 75 SIM card lock, phone lock.Troubleshooting 76 Why doesn’t the phone work the way I want?Additional information 78 Safe and efficient use, warranty, declaration of conformity.Icons 86What do the icons mean?Index 91

This is the Internet version of the user's guide. © Print only for private use.2 ContentsSony EricssonGSM 900/1800/1900Fifth edition (May 2003)This manual is published by Sony Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this manual.All rights reserved.©Sony Ericsson Mobile Communications AB, 2002Publication number: AE/LZT 108 6258 R6A Please note:Some of the services in this manual are not supported by all networks. This also applies to the GSM International Emergency Number 112.Please contact your network operator or service provider if you are in doubt whether you can use a particular service or not.Please read the Guidelines for safe and efficient use and the Limited warranty chapters before you use your mobile phone.The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc.T9™ Text Input is a trademark or a registered trademark of Tegic Communications.T9™ Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No. 1,331,057, United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro.Pat. No. 0 842 463(96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional patents are pending worldwide.Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.End-user license agreement for Sun™ Java™ J2ME™.

This is the Internet version of the user's guide. © Print only for private use.Contents 31. Restrictions: Software is confidential copyrighted information of Sun and title to all copies is retained by Sun and/or its licensors. Customer shall not modify, decompile, disassemble, decrypt, extract, or otherwise reverse engineer Software. Software may not be leased, assigned, or sublicensed, in whole or in part.2. Export Regulations: Software, including technical data, is subject to U.S. export control laws, including the U.S. Export Administration Act and its associated regulations, and may be subject to export or import regulations in other countries. Customer agrees to comply strictly with all such regulations and acknowledges that it has the responsibility to obtain licenses to export, reexport, or import Software. Software may not be downloaded, or otherwise exported or reexported (i) into, or to a national or resident of, Cuba, Irak, Iran, North Korea, Libya, Sudan, Syria (as such listing may be revised from time to time) or any country to which the U.S. has embargoed goods; or (ii) to anyone on the U.S. Treasury Department’s list of Specially Designated Nations or the U.S. Commerce Department’s Table of Denial Orders.3. Restricted Rights: Use, duplication or disclosure by the United States government is subject to the restrictions as set forth in the Rights in Technical Data and Computer Software Clauses in DFARS 252.227-7013(c) (1) (ii) and FAR 52.227-19(c) (2) as applicable.Part of the software in this product is copyright © SyncML initiative Ltd. (1999-2002). All rights reserved.Other product and company names mentioned herein may be the trademarks of their respective owners.Any rights not expressly granted herein are reserved.

This is the Internet version of the user's guide. © Print only for private use.4 Getting to know your phoneGetting to know your phoneAbout this user’s guideThe “Getting to know your phone” chapter gives a quick overview of the main functions of the phone, shortcuts and general information. More information and downloads are available at www.SonyEricsson.com/ or wap.SonyEricsson.com/Available servicesSome services and functions described in this user’s guide are network- or subscription-dependent, which means that all menus may not be available in your phone.This symbol indicates that a service or function is network- or subscription-dependent.Please consult your service provider for more information about your subscription.AssemblyBefore you can use your phone you need to:• Insert the SIM card.• Attach and charge the battery. See “SIM card and battery information” on page 5.Note: Always turn off the phone and detach the charger before you insert or remove a SIM card.The SIM cardWhen you register as a subscriber with a service provider, you get a SIM (Subscriber Identity Module) card. The SIM card contains a computer chip that keeps track of your phone number, the services included in your subscription, and your Phonebook information, among other things.Tip: Verify that your information is saved to the SIM card before you remove it from another phone. For example, Phonebook entries may be saved in the phone memory.

This is the Internet version of the user's guide. © Print only for private use.Getting to know your phone 5SIM card and battery informationIt may take up to 30 minutes before an icon appears when charging.1. Insert the SIM card. Slide the silvery holder over the SIM card to lock it in place.2. Place the battery on the back of the phone with the connectors facing each other.3. Place the back cover as shown in the picture and slide it into place.4. Connect the charger to the phone at the flash symbol. The flash symbol on the charger plug must face upwards.5. It may take up to 30 minutes before the battery charging icon appears in the display.6. Wait approximately 4 hours or until the icon indicates that the battery is fully charged. If you do not see the battery icon after this time, press any key or the joystick to activate the display.7. Remove the charger by tilting the plug upwards.Note: You have to insert the SIM card and charge the battery before you can use the phone.30 min.4 h.

This is the Internet version of the user's guide. © Print only for private use.6 Getting to know your phoneTurning the phone onTo turn on the phonePress the on/off button on the top of the phone.Note: The first time you turn on the phone it takes up to 40 seconds to begin operating.• Enter your PIN (Personal Identity Number), if you have one for your SIM card.Your PIN is provided by your service provider.If you make a mistake while entering your PIN, delete the wrong number by pressing .If your PIN starts with the same digits as an emergency number, for example 112, the digits are not hidden with an * when you enter them. This is so that you can see and call an emergency number without entering a PIN. See “Making emergency calls” on page 24. Note: If you enter the wrong PIN three times in a row, the SIM card is blocked and the message PIN blocked appears. To unblock it, you need to enter your PUK (Personal Unblocking Key). Your PUK is provided by your service provider.To turn off the phonePress and hold the on/off button at the top of the phone.on/offWel

This is the Internet version of the user's guide. © Print only for private use.Getting to know your phone 7Navigating the menusThe main menus are shown as icons on the desktop. To go to the desktop, press the joystick.ExampleTo set an alarm1. Use the joystick to scroll to Organizer, and press the left key to select it.2. Use the joystick to scroll down to Alarms, and press the left key to select this function. Press the left key again to select Alarm.3. Enter the time and press the left key to save your entry. Throughout this user’s guide instructions such as those above will be given in a shorter form, as follows:To set an alarm1. Scroll to Organizer, Alarms, Alarm.2. Enter the time, Save.To make and receive calls from standby• Enter the area code and phone number, press Call.• Press End Call to end the call.• When the phone rings, press Yes to answer the call.DesktopPress to go back one level in the menus.Press and hold to return to standby.Press to go to the desktop.Move up, down, left, right through menus.Press to select highlighted items.Press to select the options shown above these keys in the display.

This is the Internet version of the user's guide. © Print only for private use.8 Getting to know your phoneKey functions Press once to activate camera function. Press again to take a picture. Volume keys increase/decrease the earpiece volume during a call. Enter the Status menu in standby. Press twice to reject an incoming call. Press once to turn off the ring signal when receiving a call. Press to select the options that appear in the display immediately above these keys. Press once to go back one level in the menus. Press and hold to return to standby. Enter *. Shift between lower/upper case.Infrared port.Press and hold to switch the phone on or off.Press to go directly to the Internet.Move through the menus, lists and texts. Delete numbers, letters or an item from a list. Press and hold to turn off the microphone (during calls) or turn off sound. 1-9, 0 Enter digits, 0–9, and letters. Press and hold to enter the international prefix +. Enter # or a space.

This is the Internet version of the user's guide. © Print only for private use.10 Getting to know your phoneTo... When in the menus:move through menus or lists press (and hold) a volume key or use the joystickdelete an item press and hold when in lists go back to standby press and hold To... When entering letters using multitap text input:reach the second letter or character of a key press the volume key and press any of the number keysreach the third letter or character of a key press the volume key and press any of the number keysshift between capital and lower-case letters press , then the letterenter numbers press and hold any of the number keysenter a space press delete letters and numbers press shift between multitap or T9 Text input methods press and hold shift between input languages (including character or numeric) press and hold To... When entering letters using T9 Text Input:view alternative words press oraccept a word and add a space press enter a full stop press shift between capital and lower-case letters press , then the letterenter numbers press and hold any of the number keysdelete letters and numbers press shift between multitap or T9 Text input methods press and hold shift between input languages (including character or numeric)press and hold To... When entering letters using multitap text input:

This is the Internet version of the user's guide. © Print only for private use.Getting to know your phone 11Help textsMore information, explanations or tips about selected menus or functions are available in your phone.To get helpSelect the menu or function and press Info.Delete and edit If you add items, for example, a contact, a note, an appointment or a WAP bookmark, you can delete or edit them. To delete an itemSelect an item and press .To edit an itemSelect an item, press More, and choose from the list of options.Online servicesOnline services are customized services offered by service providers, independently of mobile phones and mobile phone manufacturers.A SIM card which supports Online services works in the same way as a normal SIM card. When you have inserted your SIM card and turned on your phone, your service provider can download data to your SIM card. When you restart your phone after the first data download, a new submenu appears under the menu.To enter your new menu systemScroll to Connect, Online Services.Note: This menu only appears if your SIM card supports this service. Some operators may not use the name “Online services”. Your phone may not support all of the services offered.

This is the Internet version of the user's guide. © Print only for private use.12 Getting to know your phoneMenu overviewOperator direct linkInternet ServicesMy Shortcuts Camera Messages Entertainment Pictures & SoundsView WeekRing VolumeSelect ProfileSwitch to Line 1*My NumbersEdit ShortcutsTe x tPictureCall VoicemailEmailChatWAP PushArea Info.OptionsGames & MoreOther GamesMy PicturesMore PicturesMy SoundsMore SoundsThemesMore ThemesDraw PictureMusic DJRecord SoundPhonebook Calls Connect Organizer SettingsCall ContactFind and Send**Add ContactManage ContactPicturesPersonal RingsVoice CommandsSpecial NumbersAdvancedOptionsMissed CallsCalling Local*Call ListSwitch to Line 1*Forward CallsManage CallsTime & CostNext CallOptionsOnline Services*BluetoothInfrared PortWAP OptionsSynchronization GSM NetworksData Comm.AccessoriesCalendarNotesAlarmsTimerStopwatchCalculatorCode MemoSounds and AlertsDisplayProfilesLanguageTime and DateVoice ControlLocksHandsfreeMaster Reset* Please note that some menus are operator-, network- and subscription- dependent.** Only visible during calls

This is the Internet version of the user's guide. © Print only for private use.Getting to know your phone 13Entering lettersYou can enter letters, for example, when you add names to the Phonebook, write text messages or enter WAP addresses. Apart from the way you normally enter letters in your phone, using multitap text input, you can use T9™ Text Input for entering text messages and email, for example, if the input language you select supports this. T9™ Text Input is a predictive input method and is a quicker way to write texts. See “T9™ Text Input” on page 14.Input languagesBefore you start entering letters, you need to select the input languages that you want to use when writing.To select input languages1. Scroll to Settings, Language, Input.2. Scroll to the language that you want to use for entering letters and check each language you want.3. Press Ok to exit the menu.When writing, you can switch to one of your selected input languages by pressing More and then selecting Input Language. See “The list of options” on page 15.Multitap text inputWhen saving names in the Phonebook or when writing WAP addresses, you enter letters using multitap text input. You press each key as many times as needed to show the letter you want. In the following example, we are going to write a name in the Phonebook.To enter letters using multitap text input1. Scroll to Phonebook, Add Contact.2. Press Add and then the appropriate key, – , or , repeatedly until the character you want appears in the display.See the table below: Press… to get… . , - ? !’ @ : ; / ( ) 1A B C Å Ä Æ à Ç 2 ΓD E F è É 3 ∆ ΦG H I ì 4J K L 5 ΛM N O Ñ Ö Ø ò 6P Q R S ß 7 Π ΣT U V Ü ù 8

This is the Internet version of the user's guide. © Print only for private use.14 Getting to know your phoneExample:• To enter an ‘A’, press once.• To enter a ‘B’, quickly press twice.• To shift between capital and lower-case letters, press , then enter the letter.Tip: You can also use the volume keys as a shortcut to certain letters:To enter a ‘B’, press the volume key and press .To enter a ‘C’, press the volume key and press .T9™ Text InputYou can use T9™ Text Input when writing, for example, text messages and email. The T9™ Text Input method uses a built-in dictionary that recognizes the most commonly used word for each sequence of key presses. This way, you press each key only once, even if the letter you want is not the first letter on the key. To shift from multitap to T9 text input methodPress and hold .To enter letters using T9™ Text Input1. Scroll to Messages, Text, Write New.2. For example, if you want to write the word “Jane”, press , , , .3. If the word shown is the one you want:• press to accept and add a space.(To accept a word without adding a space, press .)If the word shown is not the one you want:•Press or repeatedly to view alternative words (candidates). Accept a word and add a space by pressing .W X Y Z 9+ 0 Space ↵ ¶More for an options listto delete letters and numbersto shift between capital and lower-case letters - press and hold to enter numbersPress… to get…

This is the Internet version of the user's guide. © Print only for private use.Getting to know your phone 15If you do not find the word you want by pressing or :•Press More to go to a list of options.• Select Spell Word. • Press and hold to delete the entire word, or delete one letter at a time by pressing repeatedly. • Write the new word using multitap text input and press Insert.The word is added to the dictionary. The next time you enter the word, it appears as one of the alternative words.4. Continue writing your message. See “Sending text messages” on page 42. Press to enter a full stop. To enter other punctuation marks, press and then or repeatedly. Accept by pressing .Press and hold to select an input language.The list of optionsIf you press More when writing a text message, you enter a list of options:•Add Symbol – Symbols and punctuation marks such as ? and, are shown. Move between the symbols by using the joystick. •Insert Item – Pictures, melodies and sounds.•Spell Word – Change the suggested word by using multitap text input.•Text Format – Change style, size and alignment.•Input Language– Change input language.•Input Method – Change input method. •Word Suggestions – Select to show a list of suggested words. My Words – A list of words you have added to the dictionary.•Help.

This is the Internet version of the user's guide. © Print only for private use.Personalizing your phone 17All pictures are saved in My Pictures, in the Pictures & Sounds menu.You can also save animations in your phone. These are handled like pictures.Handling picturesYou can add, edit, or delete pictures in My Pictures. The number of pictures that can be saved depends on the size of the pictures. File types supported are GIF, JPEG and WBMP.The pictures are shown in thumbnail view. To get a full view, press View.To view your picturesScroll to Pictures & Sounds, My Pictures.To download a picture1. Scroll to Pictures & Sounds, Draw Picture.2. Select a link.To turn wallpaper on or offScroll to Settings, Display, Wallpaper, Activate.To set a picture as wallpaper1. Scroll to Settings, Display, Wallpaper, Select Picture.2. Select a picture.Tip: You can select Wallpaper by pressing More when viewing pictures in My Pictures.To edit and save a picture1. Scroll to Pictures & Sounds, My Pictures.2. Scroll to the picture you want, More.3. Scroll to Edit. You can now start to edit the picture.4. Press More, select Save Picture. The picture is saved in My Pictures.Note: To edit pictures taken with the camera, you must select 120x160 as picture size.To draw a picture1. Scroll to Pictures & Sounds, Draw Picture.2. Select a type.3. Select Tool and choose the tool you want to work with.When editing or drawing a picture:Press… to…move the cursor up and left.move the cursor up.move the cursor up and right.move the cursor left.

This is the Internet version of the user's guide. © Print only for private use.18 Personalizing your phoneExchanging picturesYou can exchange pictures via IR, Bluetooth wireless technology, picture message or email. Please note that you are not allowed to exchange copyright-protected material. For more information on sending pictures in messages, see “Messaging” on page 42. Save the email address of a WAP album in your Phonebook and you can save pictures in that album if you send the pictures as attachments.To send a picture1. Scroll to Pictures & Sounds, My Pictures. Scroll to the picture you want, More.2. Select Send.3. Select a transfer method.If you use infrared make sure that the infrared ports are facing each other.To receive and save a picture1. Scroll to Connect, Bluetooth, Turn On.2. When you receive the picture, press Save to save it in My Pictures.When you receive a picture in a text message or a picture message, a new message appears in your Inbox. To save the picture in My Pictures, highlight the picture by moving the joystick to select it and press Save.Screen saverThe phone has a screen saver, which is activated automatically when the phone has been in idle mode for a few seconds. After a few more seconds, the screen saver changes to sleep mode to save power.To turn the screen saver On or Off, scroll to Settings, Display, Screen Saver, Activate.activate the current drawing tool.move the cursor right.move the cursor down and left.move the cursor down.move the cursor down and right.More view an options menu.press and hold to exit the picture editor.undo the last action.select tool.select a color.Press… to…

This is the Internet version of the user's guide. © Print only for private use.Personalizing your phone 19To use a picture as the screen saverYou select a picture saved in the phone and use it as the screen saver.1. Scroll to Settings, Display, Screen Saver, Select Picture.2. Scroll to and select the picture you want to use as the screen saver.3. Press Yes to accept.Ring signals and melodiesYour phone comes with a number of ring signals and melodies. You can edit your own ring signals and melodies and send them to a friend in a text message. It is also possible to exchange melodies via WAP, Bluetooth wireless technology, IR or cable. Please note that you are not allowed to exchange copyright-protected material. You can also download ring signals to your phone.To select a ring signalScroll to Settings, Sounds and Alerts, Ring Sounds. To download a ring signal1. Scroll to Pictures & Sounds, More Sounds.2. Select a link.To set the ring signal volume1. Scroll to Settings, Sounds and Alerts, Ring Volume.2. Press or to increase or decrease the volume.3. Press Save to save the setting.• To turn the ring signal on or off, press and hold . All signals except the alarm are turned on/off.To compose a ring signal or melody1. Scroll to Pictures & Sounds, Music DJ.2. Choose to insert a selection of pre-recorded music blocks. You can choose from four different selections. 3. Copy and paste these blocks to build up your melody.4. Select More to play the melody and view other options.Note: To edit your own melody, scroll to Pictures & Sounds, My Sounds, select the melody and press More. Select edit.To send a melody1. Scroll to Pictures & Sounds, My Sounds.2. Scroll to a melody, More.3. Select Send. 4. Select a transfer method.Note: To send a ring signal or melody in a text message, see “To insert an item in a text message” on page 42.

This is the Internet version of the user's guide. © Print only for private use.20 Personalizing your phoneReceiving melodiesYou can receive a sound or melody via IR, Bluetooth wireless technology, text, picture message, or download it via WAP. When you receive the sound or melody, press Save to save it in My Sounds.Increasing ringYou can choose a ring signal that rises in steps from the lowest volume to the highest.To turn increasing ring On or Off Scroll to Settings, Sounds and Alerts, Increasing Ring.Specific ring signals for personal callsIf you subscribe to the Two Line Service, you can set different ring signals for the two voice lines. Line 1 and Line 2 are displayed instead of Voice Calls.If your subscription includes the Calling Line Identification (CLI) service, you can assign a personal ring signal to up to ten callers.To set a specific ring signal for a caller1. Scroll to Phonebook, Personal Rings, New Contact.2. Enter the first letters of the contact, Ok.3. Select a contact.4. Select a ring signal.Sound and alertsYou can choose to be notified of an incoming call by the buzzing of the vibrating alert. You can set the phone’s vibrating alert to one of the following:•On – all the time.•On If Silent – on when the ring volume is turned off or when you have set the phone to silent.•Off – all the time.To set the vibrating alert1. Scroll to Settings, Sounds and Alerts, Vibrating Alert.2. Select the setting you want.From the Settings, Sounds and Alerts menu, you can also select Message Alert, Key Sound and turn on the Minute Minder.If you turn on the minute minder, you hear a beep once every minute during a call.Menu languageMost SIM cards automatically set the menu language to the language of the country where you bought your SIM card. If this is not the case, the preset language is English.

This is the Internet version of the user's guide. © Print only for private use.Personalizing your phone 21To change the menu language1. Scroll to Settings, Language, Menu.2. Select a language.Display lightThe display light can be set to automatic or on. In automatic mode, the display light is turned off a few seconds after you last press a key.• To set the display light, scroll to Settings, Display,Light.• To set the display contrast, scroll to Settings, Display, Contrast.Time settingsThe time is always displayed in standby.• To set the time, scroll to Settings, Time and Date, Set Time.You can choose a 12-hour clock or a 24-hour clock.• To set the time format, scroll to Settings, Time and Date, Time Format.DateWhen the phone is in standby mode, you can press a volume key up or down to see today’s date in the Status menu.You can set the date and date format in the Settings, Time and Date menu.Advanced time settingsUnder Advanced in the Settings, Time and Date menu, you can set time zone and daylight saving time. By changing these you also change the time.When your phone changes network, and the time sent out from the operator deviates from the time in your phone, you are asked whether you want to update the time if you have turned on Auto Time Zone. If you press Yes, the time is updated automatically.Answering modeWhen using a portable handsfree kit, you can choose to answer a call by pressing any key (except the No key) or set the phone to answer the call automatically.• To select answering mode, scroll to Settings,Handsfree, Answering Mode.Start-up pictureWhen you turn your phone on or off, the Sony Ericsson start-up picture appears in the display. Your operator’s own greeting may be shown instead.To select a start-up picture1. Scroll to Settings, Display, Start-Up Picture.2. Select a greeting.

This is the Internet version of the user's guide. © Print only for private use.24 CallingAutomatic rediallingIf the connection of the call failed and the display shows Retry?, press Yes. The phone redials the number (up to ten times):• Until the call is connected.• Until you press a key or receive a call.Note: Do not hold the phone to your ear while waiting. When the call is connected, the phone gives out a loud signal.Automatic redialling is not available for fax and data calls.Making international calls1. Press and hold until a + sign appears in the display.The + replaces the international prefix number of the country from which you are calling.2. Enter the country code, area code (without the leading zero) and phone number, Call. Making emergency calls• Enter 112 (the international emergency number), Call.Your phone supports the international emergency numbers, 112, 911 and 08. This means that these numbers can normally be used to make an emergency call in any country, with or without a SIM card inserted, if a GSM network is within range.Note: Some service providers may require that a SIM card be inserted, and in some cases that the PIN have been entered as well.In some countries, other emergency numbers may also be promoted. Your operator may therefore have saved additional local emergency numbers on the SIM card.• To view your local emergency numbers, scroll to Phonebook, Special Numbers, Emergency Nos..Receiving callsWhen you receive a call, the phone rings and the display shows Answer?.If your subscription includes the Calling Line Identification service and the caller’s number is identified, the number is displayed. If you have saved the number in the Phonebook, the name and number are displayed. If you have assigned a picture to a contact, the picture is displayed. If the number is a restricted number, the display shows Withheld.

This is the Internet version of the user's guide. © Print only for private use.Calling 25To answer a callPress Yes.To reject a callPress No.Tip: You can also use your voice to answer or reject calls. See “Voice control” on page 29.Missed callsIf you have missed a call, Missed calls:1 appears in standby, indicating the number of missed calls.To check your missed calls1. Press Yes to display the missed calls.2. To call a number from the list, scroll to the number, Call.Call listThe numbers of the last 30 calls that you have made are saved in the call list. If your subscription includes the Calling Line Identification service and the caller’s number is identified, you will also find the numbers of answered and missed calls in the call list.To call a number from the call list1. To enter the call list, press Calls from standby.2. Scroll to the number you want to call, Call.• To clear the call list, scroll to Calls, Options, Clear Call List.• To turn the call list on or off, scroll to Calls, Options, Call Listing.Call priority serviceYou can request a certain priority when you make a call, if your subscription supports the call priority service.The priority levels are defined by your operator and are normally within the range of 0 – 4, where 0 is the highest priority.To check or change your standard priority level1. Scroll to Calls, Manage Calls, Default Priority.2. The network sends available priority levels.3. Select a priority level.To change the priority for one call1. Enter the phone number you want to call.2. Scroll to Calls, Next Call, Next Incoming Call.3. Select a priority. The number is called.

This is the Internet version of the user's guide. © Print only for private use.26 CallingPhonebookIn the Phonebook you can store the information on your SIM card and on your phone. You have space for up to 510 numbers. You can save all the information needed to contact people. You can also set how much information you want to show.Entries saved are stored in your phone’s memory, not on your SIM card. To synchronize your phone-based contact list with your PDA or PC, see “Synchronization” on page 66.To set the fields in contact information1. Scroll to Phonebook, Options, Contact Info.. 2. Press Check/Uncheck to select or clear fields.If your Phonebook is empty, you are prompted to copy information from your SIM card. If you press No, you can add new contacts. If you press Yes, your names and numbers are copied from your SIM.To add a contact1. Scroll to Phonebook, Add Contact.2. Scroll to the field you want to fill in, Add.3. Enter the information, Ok.4. Select the next field and so on. 5. When you have entered the information, press Save.Tip: To enter an unsaved number, press Lookup when you are in a number field, and select a number in the unsaved numbers list.Pictures, personal rings and voice commandsYou can add a picture, personal ring signal and voice command to a contact.To add a picture to a phonebook contact1. Scroll to Phonebook, Pictures.2. Enter the first letters of the contact, Ok.3. Select the contact.4. This takes you to My Pictures. Select a picture, Yes.• Select Personal Rings to add a personal ring signal.• Select Voice Commands to add a voice command.To call a contact from your contact list1. From standby, press and hold one of the number keys 2-9 to find a contact beginning with the first letter on that key (or closest following).• For example, press and hold 5 to go to the first contact beginning with “J”. To go to a contact beginning with “L” press 5 three times after you have entered the list of contacts.2. When the contact you want to call is highlighted, press Select. 3. Select the number you want to call.

This is the Internet version of the user's guide. © Print only for private use.Calling 27To call a name from your SIM card1. Scroll to Phonebook, Advanced, Call from SIM.2. Enter the first letter of the name, Ok.3. Select the name, Call.Updating the phonebookAs needed, you can easily update or delete any contact information.To edit a contact1. Scroll to Phonebook, Manage Contact, Edit Contact.2. Enter the first letters of the contact, Ok.3. When the contact is highlighted, press Edit.4. Select Edit Information. 5. Scroll to the field you want to fill in, Edit.6. Enter the information, Ok.7. Select the next field and so on.8. When you have entered the information, press Save.To delete a contact• Scroll to Phonebook, Manage Contact, Delete Contact. Then select the contact and press Delete.Tip: You can also delete a contact by pressing when the contact is highlighted.To delete all contacts• To delete all contacts, scroll to Phonebook, Advanced, Delete all?.Note: Contacts that are saved on the SIM card are not deleted.Default (standard) number Each contact has a default phone number. The first phone number you link to a contact automatically becomes the default number. If you scroll to a certain contact in the Call Contact list and then press Select, the default number is highlighted.To set the default number1. Scroll to Phonebook, Manage Contact, Edit Contact.2. Enter the first letters of the contact, Ok.3. Select the contact, Edit.4. Select Default Number. Highlight the number you want as default, press Select.GroupsYou can create a group of contacts. By doing so, you can send text messages to several recipients at the same time. See “Sending text messages” on page 42.

This is the Internet version of the user's guide. © Print only for private use.28 CallingTo create a group of contacts1. Scroll to Phonebook, Manage Contact, Groups, New Group, Add.2. Enter a name for the group, Ok.3. Select Add member, Add.4. Enter the first letters of the contact you want to add, press Ok.5. Select the contact.6. Select a phone number.7. Repeat steps 3-6 to add more members.Business cardsYou can add your own business card to the Phonebook.• To add your own business card, scroll to Phonebook, Manage Contact, My Card. Then select Add.Exchanging business cardsYou can exchange business cards between your phone and another similar phone, a PDA or a PC, using Bluetooth wireless technology, the infrared port, text or picture message.To send your business card1. Scroll to Phonebook, Manage Contact, My Card, Send.2. Select a transfer method.When you receive a business card via a text message, you accept the card by pressing Yes. To be able to receive a business card using the infrared port or Bluetooth wireless technology, you need to turn these functions on.To receive a business card1. From standby, press More and scroll to Turn On Bluetooth or Turn On IR.2. When you receive the business card, press Yes.To send a contact1. Scroll to Phonebook, Manage Contact, Send Contact.2. Enter the first letters of the contact you want to send, Ok. 3. Select the contact you want to send, Send.4. Select transfer method. To send all contactsScroll to Phonebook, Advanced, Send All and select a transfer method.Copy names and numbersYou can copy the names and numbers between your phone’s memory and the SIM card. The number of phone numbers that can be saved depends on the type of SIM card.

This is the Internet version of the user's guide. © Print only for private use.30 Calling• Record or listen to sound recordings by using voice commands.• Activate the voice control by saying a “magic word”.You can save approximately 50 recorded words as voice commands in the 40 seconds available. This also depends on what is saved in the memory with other functions. When recording, make sure you are in a quiet environment.Before voice dialingYou must first turn on the voice dialing function and record your voice commands.To turn voice dialing on and record number types1. Scroll to Settings, Voi c e Con t rol , Voice Dialing.2. Select On. Now you are going to record a voice command for each number type you use with your Phonebook contacts, for example, “home” or “mobile”.3. Instructions appear. Press Ok.4. Select a number type.5. Lift the phone to your ear, wait for the tone and say the command that you want to record. The voice command is played back to you.6. If the recording sounds OK, press Yes to save the voice command. If not, press No and repeat step 4.7. Repeat steps 4 and 5 for each voice command you need.You also need to record voice commands for each contact name, for example, “John”.To record a voice command for a contact name1. Scroll to Settings, Voice Control, Voice Dialing, Edit Names, Ad d Vo i c e Ta g .2. Select a contact.3. Follow the instructions in the display.An icon appears next to a contact name that has a voice command.Caller nameYou can choose whether you want to hear the recorded contact name when you receive an incoming call from that contact.• To turn the caller name On or Off, scroll to Settings, Voice Control, Caller Name.Voice dialingYou can voice dial by saying a pre-recorded word or by using specific key sequences.

This is the Internet version of the user's guide. © Print only for private use.Calling 31To make a call1. From standby, press and hold a volume key for one second.2. Lift the phone to your ear, wait for the tone and say a name, for example “John”. The name is played back to you.3. If you have several numbers for that contact, after a second tone, say the number type, for example, “home”.The number type is played back to you, and the call is connected.From standby, you can also initiate voice dialing, voice profiles and voice control of sound recordings by:• Pressing and holding a volume key.• Pressing the handsfree button (when using a portable handsfree or a Bluetooth headset).• Saying the magic word. See “The magic word” on page 32.RediallingYou can use your voice to redial the last dialed number, if you record a voice command for redialling.To turn on and record a redial command1. Scroll to Settings, Voice Control, Voic e R ed i a l .2. Select On.3. Instructions appear. Press Ok.4. Lift the phone to your ear, wait for the tone and say “Redial”, or another word. If the recording sounds OK, press Yes. If not, press No and repeat step 4.To redial using a voice command1. From standby, press and hold a volume key for one second.2. Lift the phone to your ear, wait for the tone and say “Redial”. The voice command is played back to you and the last dialed number is called.Voice answeringYou can answer or reject incoming calls by using your voice, when using a portable handsfree or a car handsfree kit.To turn on voice answering and record voice answer commands1. Scroll to Settings, Voice Control, Voice Answer.2. Select On.3. Select the accessories you want to be able to use with voice answering by pressing Check and then Save.

This is the Internet version of the user's guide. © Print only for private use.34 CallingTips when recording and using voice commandsIf your phone cannot detect speech, one of the following might have happened:• You spoke too softly – try speaking more loudly.• You held the phone too far away – hold it as you do during a call.• The voice command was too short – it should be around one second long and more than one syllable.• You spoke too late or too soon – speak immediately after the tone.• You did not record the voice command when the handsfree was attached – for voice control with a handsfree kit, record when the handsfree is attached.• You used another intonation – use the same intonation as you did when recording the voice command.VoicemailIf your subscription includes an answering service, callers can leave a voicemail message when you cannot answer a call.Receiving a voicemail messageDepending on your service provider, you are informed that someone has left a message by a text message or by a voicemail indication. Press Yes to listen to the message.Calling your voicemail serviceYou can easily call your voicemail service by pressing and holding , if you have saved your voicemail number in the phone. You get the number from your service provider.• To enter the number, scroll to Messages, Options, Voicemail NumberCall time and costDuring a call, the duration of the call is shown in the display. If you subscribe to cost information, the call cost (or the number of call units) is displayed.You can check the duration of your last call, outgoing calls and the total time.• To check the call time, scroll to Calls, Time & Cost, Call Timers and select an option. To reset the call time meter, select Reset Timers.You can check the cost of your last call and the total cost of your calls.• To check the call cost, scroll to Calls, Time & Cost, Call Costs and select an option. To reset the call cost meter, select Clear Total Cost.

This is the Internet version of the user's guide. © Print only for private use.Calling 35Note: If you subscribe to cost information, you must enter your PIN2 to clear the cost or time counter.Setting the call costYou can use the Rate function to specify the price per call unit. If you do not specify a price per call unit, the number of call units appears.To enter the price per call unit1. Scroll to Calls, Time & Cost, Call Costs, Set Rate.2. Enter your PIN2, Ok.3. Select Change, Ok.4. Enter the code for the currency you want, (for example USD for American dollars), Ok.5. Enter the price per call unit, Ok.To enter a decimal point, press .Credit limit for callsYou can enter a total amount of money that can be used for making calls. When the amount reaches zero, no more calls can be made. Please note that the credit limit is only an estimated value.To set a credit limit1. Scroll to Calls, Time & Cost, Call Costs, Set Credit.2. Enter your PIN2, Ok.3. Select Change, Ok.4. Enter an amount, Ok.Forwarding callsIf you cannot answer incoming voice, fax or data calls, you can forward them to another number, for example your answering service.For voice calls, you can choose between the following forward alternatives:•Always Forward – forward all voice calls.•When Busy – forward calls if you are already on the phone.•Not Reachable – forward calls if your phone is turned off or if you are unreachable.•No Reply – forward calls that you do not answer within a specified time limit (operator-dependent).Note: When the Restrict Calls function is on, some Forward Calls options cannot be activated.

This is the Internet version of the user's guide. © Print only for private use.36 CallingTo turn on a call forward1. Scroll to Calls, Forward Calls.2. Select a call category and then a divert alternative.3. Select Activate.4. Enter the phone number to which you want your calls to be diverted and press Ok, or retrieve it from the Phonebook.To turn off a call divert, select a divert option and select Cancel.To check status•Scroll to Calls, Forward Calls. Select a call type. Scroll to the divert you want to check. Select Get Status. • To check the status of all call diverts, select Check All in the Forward Calls menu.More than one callYou can handle more than one call simultaneously. For example, you can put an ongoing call on hold, while you make or answer a second call, and then switch between the two calls. Note: To open the Ongoing Call menu during a call, press the joystick.Call waiting serviceIf the call waiting service is on, you hear a beep in the earpiece if you receive a second call during an ongoing call.• To turn the call waiting service on or off, scroll to Calls, Manage Calls, Call Waiting.To make a second call1. Press Hold to put the ongoing call on hold.2. Enter the number you want to call and press Call, or retrieve a number from the Phonebook.Note: You can only put one call on hold.Receiving a second call• To answer the second call and put the ongoing call on hold, select Answer.• To reject the second call and continue the ongoing call, select Busy.• Select Release & Answer to answer the second call and to end the ongoing call.

This is the Internet version of the user's guide. © Print only for private use.Calling 37Handling two callsWhen you have one ongoing call and one call on hold, you can do the following:• Press the joystick and select Switch Calls to switch between the two calls.• Press the joystick, then select Join Calls to join the two calls into a conference call.• Press the joystick, then select Transfer Call, to connect the two calls. You are disconnected from both calls.• Press End Call to end the ongoing call, then press Yes to retrieve the held call.• Press End Call twice to end both calls.Note: You cannot answer a third call without ending one of the first two calls.Conference callsIn a conference call, you can have a joint conversation with up to five other people. You can also put a conference on hold and make another call.Note: There may be additional charges for calls involving multiple parties. Contact your service provider for more information.Creating a conference callTo create a conference call, you must first have one ongoing call and one call on hold.To join the two calls into a conference call• Press the joystick and select Join Calls.To add a new participant1. Press Hold to put the conference call on hold.2. Call the next person you wish to include in the conference call.3. Press the joystick and select Join Calls.Repeat steps 1 to 3 to include more participants.To release a participant1. Press the joystick and select Release Party.2. Select the participant.To end the conference call• Press End Call.Having a private conversationYou can have a private conversation with one of the participants and put the other participants on hold.

This is the Internet version of the user's guide. © Print only for private use.38 Calling• Press More, then select Extract Part to select the participant that you want to talk with.•Select Join Calls to resume the conference call.Two voice linesYour phone may have two voice lines with different phone numbers. This may be useful if, for example, you want to keep business and private calls on separate lines.• To select a line, scroll to Calls, Next Call.All outgoing calls are made on this line until you change it. Incoming calls can still be received on either line.You can change the names of the lines, and have different settings for each line, for example, different ring signals.• To change the name of a line, scroll to Settings, Display, Edit Line Tags.Calling card callsYou can use the calling card service to redirect the cost of a call to a credit card or a calling card account, instead of your normal account. This may be useful, for example, when making long distance calls.You can save two separate calling card numbers. The numbers and the codes associated with them are protected by the code.Before making a calling card call, you need to select and activate a card.Note: You cannot use the calling card service for fax and data calls.To turn the calling card service on or off1. Scroll to Calls, Time & Cost, Calling Cards, Use Calling Cards.2. Enter your phone lock code, Ok.3. Select On or Off, Ok.To save a card number1. Scroll to Calls, Time & Cost, Calling Cards, My Cards.2. Enter your phone lock code, Ok. 3. Select New Card.Enter the card settings (the access number and name of the calling card server, and the verification code). You get this information from your card provider. Select which you want to send first – the number that you want to call, or the verification code.

This is the Internet version of the user's guide. © Print only for private use.Calling 39To select a card1. Scroll to Calls, Time & Cost, Calling Cards, My Cards.2. Enter your phone lock code, Ok.3. Select a card.4. Select Activate Card.To make a calling card call1. Enter the phone number of the person you want to call or retrieve the number from the Phonebook.2. Press More, select Calling Card Call.The access number of the calling card server is called. During the connecting phase, you are asked to send the phone number you want to call and the verification code.3. Press Yes when the display shows Send called number?, or wait a few seconds and the number and code are sent automatically.Restricted dialingYou can use the restrict calls service to restrict outgoing and incoming calls. This may be useful, for example, when you are abroad. To use this service, you need a password which you get from your service provider.Note: If you divert incoming calls, you cannot activate some Restrict Calls options.The following calls can be restricted:• All outgoing calls – All Outgoing.• All outgoing international calls – Outgoing Intl.• All outgoing international calls except to your home country – Outg. Intl. Roam.• All incoming calls – All Incoming.• All incoming calls when you are abroad (when roaming) – Inc. when Roam.To turn a call restriction on or off1. Scroll to Calls, Manage Calls, Restrict Calls.2. Select an option.3. Select Activate or Cancel.4. Enter your PIN, Ok.• To turn off all call restrictions, select Cancel All.• To change the PIN, select Change Password.Fixed dialingThe fixed dialing function allows calls to be made only to certain numbers saved on the SIM card. Fixed dialing requires a SIM card that allows fixed numbers to be saved. The fixed numbers are protected by your PIN2.

This is the Internet version of the user's guide. © Print only for private use.40 CallingNote: Calls to the international emergency number 112 can still be made, even when the fixed dialing function is on.• Partial numbers can be saved. For example, saving 0123456 allows calls to be made to all numbers starting with 0123456.• Numbers with question marks can be saved. For example, saving 01234567?0, allows calls to be made to numbers from 0123456700 to 0123456790. To enter a question mark, press and hold .To turn fixed dialing on or off1. Scroll to Phonebook, Options, Fixed Dialing.2. Enter your PIN2, Ok.3. Select On or Off.• To save a fixed number, scroll to Phonebook, Special Numbers, Fixed Numbers. Select New Number and enter the information.Closed user groupsThe Closed User Group function is a way of lowering call costs. On some networks it is cheaper to make calls within a call group. You can save ten groups.To add a group1. Scroll to Calls, Manage Calls, Closed Groups, Edit List.2. Scroll to New Group, Add.3. Enter the name of the user group, Ok.4. Enter the index number, Ok.You get the index number from your operator.To activate a group1. Scroll to Calls, Manage Calls, Closed Groups, Edit List.2. Select a group.3. Select Activate.Calls can only be made within the selected group.• To call outside a Closed User Group, select Calls, Manage Calls, Closed Groups, Open Calls and then select On.Accept callsWith the accept calls service, you can choose to receive calls only from certain numbers. Other calls are automatically rejected by a busy tone. The phone numbers of calls you have rejected are saved in the Call List.

This is the Internet version of the user's guide. © Print only for private use.Calling 41To add numbers to the accepted callers list1. Scroll to Calls, Manage Calls, Accept Calls, Accepted List.2. Scroll to New, Add.This takes you to the Phonebook or Groups.3. Select an entry.• To select an accept option, scroll to Calls, Manage Calls, Accept Calls, Accept Options.NetworksWhen you turn on the phone, it automatically selects your home network if this is within range. If it is not within range, you may use another network, provided your service provider has an agreement that allows you to do so. This is called roaming.You can select the network you want to use, or you can add a network to your list of preferred networks. You can also change the order in which networks are selected during an automatic search. For all such options, scroll to Connect, GSM Networks.Tone signalsYou can use telephone banking services or control an answering machine by sending tone signals (also known as DTMF tones or touch tones) during a call. • To send the tones, press the number keys 0-9, and .• To clear the display after the call is finished, press .NotepadYou can use the phone to make a note of a phone number during a call. When you press the number keys, the person you are talking to hears tone signals. To turn these tone signals off during the call, press the joystick and select Turn Off Tones. When you end the call, the number remains in the display. You can then call the number by pressing Call.Showing or hiding your numberIf your subscription supports the Caller ID restriction service, you can hide your phone number when making a call.To show or hide your phone number1. Enter the phone number you want to call.2. Press More and select Hide My Number or Show My Number.

This is the Internet version of the user's guide. © Print only for private use.42 MessagingMessagingYour phone supports various messaging services - text messaging, chat messaging, picture messaging and email. Please contact your service provider for details of which services you can use. For more information about text, see “Entering letters” on page 13.Text messagingText messages can be sent to one person, several recipients or to a group of recipients that you have saved in the Phonebook. See “Groups” on page 27. Text messages can also contain pictures, animations, melodies and sounds.Before you start• First make sure that the number of your service center is set. The number is supplied by your service provider and is usually saved on the SIM card.To set the service center number1. Scroll to Messages, Text, Options, Service Centers.If the service center number is saved on the SIM card, it appears in the display.2. If there is no number in the list, select New Number, Add.3. Enter the number, including the international “+” sign and country code, Ok.Sending text messagesFor information about entering letters, see “Entering letters” on page 13.To write and send a text message1. Scroll to Messages, Text, Write New.2. Write your message, Continue.3. Enter the recipient’s phone number, Ok or retrieve a number or a group from the Phonebook by pressing Lookup.4. Press Send.Note: If you send a text message to a group, you are charged for each member of that group.To insert an item in a text message1. Scroll to Messages, Text, Write New.2. While writing your message press More.3. Select Insert Item.4. Select Picture, Sound, Melody, Animation or Picture (other).5. Select an item, Yes.

This is the Internet version of the user's guide. © Print only for private use.Messaging 43Text formattingYou can change the style, size and alignment of the text, and create new paragraphs, in a text message.To format the text in a text message1. Scroll to Messages, Text, Write New.2. Write the text message. Press More.3. Select Tex t F orma t . Then select Text Style, Text Size, Alignment or New Paragraph.4. Select a text format, Ok.Receiving text messagesWhen you receive a text message, the phone beeps and the message Read now? appears in the display. Press Yes to read the text message, or No if you want to read the message later.• While reading the text message you can, for example, start a chat session with the sender or go to a WAP address found in the text message.When you have read the text message, press More to view a list of options. Press to close the text message.Calling a number in a text messageYou can call a phone number that appears in an text message.• Select the phone number, Call.Saving incoming text messagesIncoming text messages are saved in the phone memory. It is also possible to save messages on the SIM card. Messages that you have saved on the SIM card remain there until you delete them.To save from a text messageWhen the phone number, WAP address, picture, animation or melody is highlighted, press More. Then select Save.• A picture or animation is saved in My Pictures.• A melody is saved in My Sounds.• A phone number is saved in Phonebook.• A WAP address is saved in Bookmarks.Long messagesA text message can contain up to 160 characters. You can send a longer message by linking two or more messages. Please note that you are charged for each message within a linked message.• To turn long messages on, select Long Messages from the Messages, Text, Options menu, then select On.

This is the Internet version of the user's guide. © Print only for private use.44 MessagingTemplatesIf you have one or more messages that you send often, you can save these as templates. There are five pre-defined templates in your phone, but you can also create your own.To create a template1. Scroll to Messages, Text, Templates, New Template, Add.2. Write the message, Ok.3. Press Yes if you want to send the message now. Press No to save the template.Message optionsYou can set a default value for the message options below, or you can turn on the Set on send option which means that you choose the settings each time you send a message.• SMS Type– The phone supports different types of messages. Your service provider may offer the facility of converting a text message into a format (email or fax, for example) that suits the equipment that is going to receive the message.•Validity Period – If your message cannot be delivered, for example, if the recipient has turned off the phone, your service center can save the message to send it later.•Request Reply – Include a reply request if you want the recipient of your message to reply.•Status Request – Check whether a message has been delivered.To set a default message option1. Scroll to Messages, Text, Options.2. Select an option.To turn set on send on or offRepeat steps 1 and 2 above, then select Set on Send.Picture MessagesPicture messages can contain text, pictures and sounds and are sent via MMS (Multimedia Messaging Service). You must have a subscription that supports MMS. Picture messages can be sent to a mobile phone and email account. You can also send contacts, calendar entries, sound recordings and notes as attachments.

This is the Internet version of the user's guide. © Print only for private use.46 Messaging•Cc: – Phone number or email address.•Bcc: – Phone number or email address.•Attachments: – Add your own card, a business card or a melody from My Sounds.•Priority: – High, normal, low.•Delivery report: – Turn on or off.•Read report: – Turn on or off.Tip: You can base your message on one of the pre-defined templates. To use a pre-defined template for a picture message1. Scroll to Messages, Picture, Templates.2. Select a template and press Add to make changes. Receiving picture messagesWhen you receive a picture message, the phone beeps and the message Read now? appears in the display. Press Yes to read the message.Note: You can receive a maximum of 20 messages. You may have to delete old messages before you can receive new ones.Restrict messagesFrom the Messages, Picture, Options, Restrict Messages, Home Network or Roaming Network select one of the following:•Allow – Your phone automatically downloads messages to your phone as soon as they come to your operator’s server. This is default.•Always Ask – You will be prompted to download or to keep it on the server.•Restrict – New messages appear in the box as icons. No prompt is received with the message.• From the Messages, Picture, Options, Restrict Messages, Filter, select the type of message you want to reject automatically:• Advertisements • Anonymous Mobile chatThe mobile chat function works in the same way as a chat on the Internet. You can choose a nickname that will appear in the recipient’s display each time you send a chat message.

This is the Internet version of the user's guide. © Print only for private use.Messaging 47To enter a chat nickname1. Scroll to Messages, Chat.2. Select Nickname.3. Enter your nickname (maximum of 11 characters), Ok.To start a chat session1. Scroll to Messages, Chat, Start New.2. Enter the recipient’s phone number, Ok or retrieve it from the Phonebook by pressing Lookup.3. Write your message, Send.Receiving a chat session invitationWhen you receive a chat session invitation, the phone beeps and the message New chat message arrived. Chat now? appears in the display.• To read the chat message, press Yes.• Write your chat message reply and press Yes.• To suspend a chat session, press No.• To resume a chat session, scroll to Messages, Chat,Resume• To end a chat session, press and hold .• To reject a chat message, press No. If you receive a new chat message while another chat session is ongoing, press Yes to end the ongoing session and start the new one.Area informationArea information is a type of text message (for example, a local traffic report) that is sent to all subscribers in a certain network area. When you receive an area information message, the message automatically appears in the display. You cannot save area messages. Please consult your service provider for more information about area information codes.• To turn area information on or off, scroll to Messages, Area Info., Reception.• To enter an area information code, scroll to Messages, Area Info., Message List, Add New.Cell informationThe cell information channel is used by some service providers to send messages to their subscribers within a certain network area.• To turn on the channel, scroll to Messages, Area Info., Cell Information.

This is the Internet version of the user's guide. © Print only for private use.48 MessagingEmailYou can use your phone to send and receive email messages. Please note that you need a subscription that supports data transmission. For more information, consult your service provider.Before you startFirst make sure that you have:• Set up a data account. See “Data account” on page 55.• Set up and selected an email account. See “Email account settings” on page 59.Sending and receiving email messagesThe Send & Receive option offers the fastest way to send email messages saved in the Outbox and check for new email messages.To write and send an email message1. Scroll to Messages, Email, Write New.2. Select:•To: – Then add name, enter an email address, or retrieve an email address from the Phonebook. To retrieve a saved address from the Phonebook or received messages in your inbox, press More and select either Phonebook or Archive. When you have finished adding recipients, press Done to return to writing an email message.•Cc: – If you want to send a copy of the message to someone.•Priority: – Set the message priority.•Subject:– Write a title, Ok.•Text: – Write your message, Ok.•Attachments: – Add pictures to a message.To retrieve a number from the phonebook or archive press Lookup.When you have finished, press Done.3. Select one of the following:•Send Now – The email message is sent.•Send w/Attach. – You can attach a picture from My Pictures or from a digital camera connected via IR. Select a picture and press Send.•Save to Outbox – The email message is saved in the Outbox.•Save to Drafts – The email message is saved in the Drafts folder.•Send & Receive in the Email menu – All email messages in the Outbox are sent.

This is the Internet version of the user's guide. © Print only for private use.Messaging 49To receive and read email messages1. Scroll to Messages, Email, Send & Receive2. When the email messages have been downloaded to the phone, scroll to Messages, Email, Inbox to read them.Note: The phone can save up to six complete email messages depending on size or you can download headers only. See “Email account settings” on page 59. All email messages are also saved on your email server.An arrow in the top or bottom left corner indicates that there are more messages on the server. To reply to an email message1. Select Reply.2. Select Write New or Include This Msg. to include the received message.3. Write the message, Send.To save an email address or a phone number• When the email address or phone number is highlighted, select Save.ArchivingYou can archive an email message in order to read it later. You can archive only as much text as the display shows.To archive an email message1. Open the email message.2. Make sure that the text you want to archive is visible in the display.3. Place the cursor in the text and press More.4. Select Copy to Archive The text can be found in Archive in the menu.To delete an email message (POP3 users)1. Scroll to Messages, Email, Inbox.2. Scroll to the message and press More.3. Select Mark f.deletion. The message is deleted the next time you connect to your email server by selecting Send & receive.To delete email messages (IMAP4 users)1. Scroll to Messages, Email, Inbox.2. Scroll to the message and press More.3. Select Mark To Delete The message is marked for deletion on the server.Select Purge Inbox in the Options menu.4. The message is deleted the next time you connect to your email server by selecting Send & Receive.

This is the Internet version of the user's guide. © Print only for private use.50 CameraCameraYour mobile phone has a digital camera. You can take pictures and send them as picture messages. To do this, you need a subscription that supports this service. Please check with your service provider.You can also use a picture as a screen saver or as wallpaper, or save it together with a contact in your phonebook so that the picture appears when that person calls. See “To add a picture to a phonebook contact” on page 26.Taking picturesThere are different ways to take a picture. You can scroll to Camera and hold the phone as shown in the illustration. You can see the subject in the phone display. Press Capture to take the picture. Tip: You can take a rapid succession of pictures by repeatedly pressing the joystick.

This is the Internet version of the user's guide. © Print only for private use.Camera 51Press the camera button on the side of the phone to activate the camera. Hold the phone as shown in the illustration. You can see the subject in the phone display. Press the camera button again to take the picture.You can also take a self-portrait. Hold the phone as shown in the illustration. You can see your reflection in the mirror provided. Press the camera button on the side of the phone to activate the camera. Press the camera button again to take the picture.To attach the mirror to your phone1. Remove the back cover and rubber plug from the phone.2. Place the mirror in the opening and press down to secure it.

This is the Internet version of the user's guide. © Print only for private use.52 CameraOptionsWhen the camera is activated, press More for the following options.My Pictures – View all your pictures. Picture Size – Choose between 288x352 or 120x160. Night Mode – Use in poor lighting conditions. Effects – Select different effects for your picture.Default Name – Create a name for your picture.Self-Timer – The picture is taken a few seconds later.Tip: To adjust the brightness, press the joystick up or down repeatedly.Note: All phones that support pictures can receive the picture size 120x160. Some phones that support pictures cannot receive the picture size 288x352. The best picture size to view on a PC is 288x352.Saving, discarding and deleting picturesTo discard a pictureWhen you have taken a picture, a Save icon will appear in the display immediately above the joystick. If you do not want to save the picture, select Discard. To save a picture• Press the joystick to save the picture in My Pictures. To delete a picture from My pictures1. Scroll to Pictures & Sounds, My Pictures.2. Highlight the picture you wish to delete, More.3. Scroll to and select Delete, Yes.Note: If Memory full. appears, you cannot save any more pictures until you have deleted an item from the phone’s memory.Picture messaging Before you send a picture message, you need to enter your service center number and WAP settings in your phone. Your service provider provides you with the settings. See “Setting up WAP and email” on page 53. The phone that you are sending the picture to needs to support data transmission and pictures in order to receive and show the picture.To take and send a picture1. Scroll to Camera. 2. Take a picture by pressing Capture. 3. Press Send and create your picture message.

This is the Internet version of the user's guide. © Print only for private use.58 Setting up WAP and emailSecurity module (Locks)The security module is located on the SIM card if your network operator or service provider supplies such a service. It can contain both certificates and your private keys. The security module is protected by a special access PIN and your phone asks you for it when establishing a secure connection.To enter the access PIN (for the security module) and the signature PIN•Scroll to Connect, WAP Options, Security, Locks.Digital signaturesYou can sign a contract with your phone by entering a digital signature PIN as if signing with a pen on paper. Digital signature records can be traced back to your private key through a certificate that is used for signing a contract. All transactions (signed contracts) made with your phone when browsing are stored in your phone.To check your contracts• Scroll to Connect, WAP Options, Security, Contracts.Trusted certificates and Client certificatesTo establish a secure connection when using certain WAP services, for example banking or WAP shopping, you need certificates in your phone. • The different types of certificates are as follows: 1. Server certificates are used to identify a WAP gateway to the phone and to show that it is certified by a trusted authority. The server certificate is checked against trusted certificates that are stored in the phone or in a security module. If the phone cannot verify the identity of a server, you are given the option to terminate or continue the connection.2. Trusted certificates are used to verify the WAP gateway that you are trying to connect to. Your phone may already contain trusted certificates when you buy it. If you have a security module, it may also contain trusted certificates. You can also download trusted certificates from www.SonyEricsson.com.3. Client certificates are located in a security module together with your private keys. Client certificates can be used to present your identity to a bank or other services. They can also be used for digital signatures.To check the certificates in your phone• Scroll to Connect, WAP Options, Security, Client Certificates.

This is the Internet version of the user's guide. © Print only for private use.Setting up WAP and email 59Email account settingsAn email account specifies, for example, the server that is used for your email messages.There are two ways to create an email account:• create an email account manually• use the InternetTo create an email account manually1. Scroll to Messages, Email, Options. 2. Select Edit Account.3. Select New Account.4. Enter a name for the account, for example Home or Office.5. Select Connect Using.6. Select the data account you want to use with this e-mail account.7. Enter the rest of the settings in the list, some of which are optional. To enter the settings, scroll to the setting, press Select and enter the information. Press Ok to confirm. Repeat this for each required setting. You use the same email settings in your phone as in your PC email program. If you do not have an email service, contact your operator to get all the necessary settings.•Protocol – select POP3 or IMAP4.•Incoming Server – enter the name or IP address of the service provider for incoming email messages. For example, mail.server.com or 10.1.1.1.•Incoming Port – if needed, change the number of the port used by the protocol you are using.•Mailbox – enter a user name for your email account.•Password – enter a password for your email account. Your service provider may alternatively request a password on connection.•Outgoing Server – enter the name or IP address of the SMTP server to be able to send email messages.•Outgoing Port – if needed, change the number of the port used by the SMTP protocol.•Email Address – enter your email address.•Download – select whether to receive headers and text or headers only.•From name – enter your name.•Signature – select if you want to add your business card to your email messages.•Copy Outgoing – Select On if you want email messages sent from your phone also to be sent to an email address of your choice. This way, your sent messages are copied and can be saved for future reference.

This is the Internet version of the user's guide. © Print only for private use.60 Using WAP•Check Interval – Select how often you want the phone to connect to your email server and check for incoming email messages.If you have both an office and a home email account, you can set one of them as default:• Select Set Account from the Messages, Email, Options menu and select the account.InternetAt www.sonyericsson.com you can get support on how to enter your email settings. Use the email configurator to set up your phone for email, or read the Getting Started document. Contact your service provider for information about your settings.Using WAPYour phone has a WAP (Wireless Application Protocol) browser and email messaging which are designed to bring a modified Internet to your mobile phone. A wide range of services are available, for example, news, entertainment, timetables, reservations, banking, e-commerce, positioning and email.Before you startFirst make sure that you have:• A phone subscription that supports data transmission. • Correct settings in your phone for mobile Internet, WAP and/or email messaging.• Registered as a WAP/Email user with your network operator or service provider.Note: See “Email account settings” on page 59 or “Email” on page 48 for more information about e- mail set-up and messaging.

This is the Internet version of the user's guide. © Print only for private use.62 Using WAPTo work with bookmarks 1. Scroll to Internet Services.2. Press More, Bookmarks.3. Select the bookmark you want to work with.4. Press More and select one of the following options:•Go to Bookmark – Go to the marked WAP address.•Edit – Edit the name and/or the WAP address of the bookmark. • Delete – Delete the bookmark.•Send as Text Msg. – Send a link to the WAP address in a text message.•Send – Send a link to the current WAP address via infrared or Bluetooth.•Set as Homepage – Set the WAP address as the home page.DownloadingYou can download pictures, themes, games and ring signals, for example, from WAP sites directly to your phone.To download from wap.sonyericsson.com1. Scroll to Sony Ericsson.2. Select what you want to download and follow the instructions that appear.Stored informationThe following information can be saved in your phone:• Cache – improves memory efficiency.• Passwords – improves server access efficiency.• Cookies – improves site access efficiency.To clear cacheScroll to Connect, WAP Options, Clear Cache.To remember passwordsScroll to Connect, WAP Options, Password List, Remember Pwds.To clear passwordsScroll to Connect, WAP Options, Password List, Clear Passwords.To allow cookies1. Scroll to Connect, WAP Options, Cookies.2. Select Allow Cookies.To clear cookies1. Scroll to Connect, WAP Options, Cookies.2. Select Clear Cookies.It is advisable to clear any sensitive information about previously visited WAP services. This is to avoid a security risk if your phone is misplaced, lost or stolen.

This is the Internet version of the user's guide. © Print only for private use.Transferring and exchanging information 63Transferring and exchanging informationBluetooth™ wireless technologyYour phone has built-in Bluetooth wireless technology which makes it possible for you to connect your phone wirelessly to other Bluetooth devices such as a handsfree, PC or other phones. You can, for example, have a conversation via a cordless Bluetooth handsfree or browse the Internet, wirelessly connected via your mobile phone. You can automatically synchronize information in your phone and your PC. You can also exchange, for example, contacts, calendar items and pictures.Note: We recommend that your phone and the Bluetooth device you are communicating with be within a range of 10 meters. The connection may be improved if there are no solid objects in between your phone and the other Bluetooth device.Before you startTo communicate with another Bluetooth device, you first need to add the device to the list of my devices. To synchronize with your PC, and to browse the Internet, you also need to install software on your PC from the Sony Ericsson web site, www.SonyEricsson.com/support/. You can exchange items or play games without having to add the other device to the list of My devices. To turn Bluetooth on1. In standby, press More.2. Select Turn On Bluetooth.To add a device to your phone1. Scroll to Connect, Bluetooth, My Devices, New Device.Press Add and your phone searches for all types of available devices. Press More if you want to select a specific type of device to search for.2. The phone searches for Bluetooth devices. A list of available devices appears in the display. Select a device.3. Enter a passkey (up to 16 digits) for the device, both in the phone and, for example, in the PC. (If a passkey does not come with the Bluetooth device when you buy it, you need to create one yourself.)

This is the Internet version of the user's guide. © Print only for private use.64 Transferring and exchanging informationNote: To add a device or accept the addition of a device to My devices means that the device has access to functionality and content in the phone.To organize your list of devicesScroll to Connect, Bluetooth, My Devices. Then select a device from the list and press More to view a list of options.Phone nameYou can choose a name for your phone. This name is shown in other devices when your phone is found, and is also used for the infrared port.• To enter a name, scroll to Connect, Bluetooth, Options, Edit Phone Name.In order for your phone to be found by other Bluetooth devices, you must make sure Bluetooth is turned on and your phone is visible to other devices. To hide or show your phone when using Bluetooth1. Scroll to Connect, Bluetooth, Options, Visibility.2. Select Show Phone or Hide Phone.HandsfreeTo add a Bluetooth handsfree to your phone1. Scroll to Connect, Bluetooth, Handsfree, My Handsfree, New Handsfree.2. Select Add.Transferring sound when using a handsfreeWhen you are using a Bluetooth handsfree with your your phone, you can choose where the sound should be transferred during a call.• Press More in standby during the call, select Transfer Sound. Then select either to transfer sound to the phone or to other handsfree devices that have been added to your phone. You can select where to direct the sound when making call. • Scroll to Connect, Bluetooth, Handsfree, Outgoing Calls, then select In Handsfree, In Phone, Always Ask.Sending and receivingTo send an item using Bluetooth wireless technology, you need to make sure that the devices are within 10 meters.

This is the Internet version of the user's guide. © Print only for private use.Transferring and exchanging information 65To send an itemAfter you select Bluetooth as the transfer method, a list of possible receivers is presented. First in the list will be the last device you were in contact with and devices that have been previously added to your phone. The phone also searches for other devices which are shown in the listTip: You can send certain items in your phone (calendar overviews, appointments and tasks, contacts, text messages) to specific Bluetooth printers.Note: In countries where the use of Bluetooth wireless technology is not allowed, you must ensure that the Bluetooth function is set to Off.Infrared portYou can use the built-in infrared port to establish contact between your phone and a PC or another device equipped with an infrared port.Activate the infrared portBefore you can connect to another infrared device you have to activate the infrared port in your phone.• To activate the infrared port, scroll to Connect, Infrared Port. From standby, you can also select More, Turn On IR. To connect two devices1. Place your phone as in the picture. The infrared port on the phone must face the infrared port on the other device. Note: If you are connecting to a PC, make sure your PC has activated infrared communication (Start, Settings, Control Panel, Infrared, Options tab, Enable infrared communication).2. Your phone now establishes contact with the other device.

This is the Internet version of the user's guide. © Print only for private use.More features 67One numberIf you have a SIM card that does not support separate fax and data numbers, the phone does not recognize the type of incoming call.If you want to receive a fax or data call, you have to set the phone to one of these options. Once you have set your phone for a specific incoming call, it stays like this until you change it.To select the call type you want your next incoming call to be, scroll to Calls, Next Call, Next Incoming Call.More featuresAlarm clockThe alarm can be set to ring at a specific time within 24 hours, or recurrently at a specific time on several days. You can have both these alarms set at the same time. Even if you have set your phone to silent, the alarm and timer signals ring. The alarm clock also rings if the phone is turned off.To set an alarm1. Scroll to Organizer, Alarms, Alarm.2. Enter the time, Save.• To change the alarm time, scroll to Organizer, Alarms, Alarm, Set New Time.• Press any key to turn the alarm signal off when it rings. If you do not want the alarm to be repeated, press Yes.• To cancel the alarm, scroll to Organizer, Alarms, Alarm, Cancel.• To set a recurrent alarm, scroll to Organizer, Alarms, Recurrent Alarm. Then enter the time and select the days that you want the alarm to recur by scrolling and pressing Check. Press Save to exit the menu.• To select an alarm signal, scroll to Settings, Sounds and Alerts, Alarm Signal.

This is the Internet version of the user's guide. © Print only for private use.68 More featuresStopwatchScroll to Organizer, Stopwatch.• Press Start to start the stopwatch.• Press New Lap to start a new lap time.• Press Stop to finish.• Press Restart to restart the stopwatch.• Press Reset to reset the stopwatch.Note: The stopwatch is turned off when you answer an incoming call or when you exit the stopwatch menu.TimerThe phone has a timer that can be set to count down from 99 hours, 59 minutes, 59 seconds.• To set the timer, scroll to Organizer, Timer. When the signal rings, press any key to turn it off.CalculatorThe phone has a calculator, which can add, subtract, multiply, divide and calculate percentages.• Enter a digit and scroll to a symbol (+, -, x, /, %, .).• Press to delete a digit or symbol.• Press to start a new calculation.Code memoInstead of having to remember all the different security codes for credit cards, you can, for example, save them in the code memo in your phone. Then all you need to remember is the password to open the code memo. You can save a maximum of ten codes in the code memo.Checkword and securityTo confirm that you have entered the correct password for the code memo and to prevent unauthorized access to your codes, you must enter a checkword. When you enter your password to open the code memo, the checkword is shown for a short time. If the password is correct, the correct codes are shown. If you enter the incorrect password, the checkword and the codes that are shown are also incorrect.Factors strengthening the security of the Code memo function are:• You get no feedback about whether the password is correct, except for the checkword, and only you know the checkword.• All codes are encrypted in the mobile phone.• When you access your codes, they are shown for a limited time only.

This is the Internet version of the user's guide. © Print only for private use.More features 69To open code memo for the first time1. Scroll to Organizer, Code Memo.A message with instructions appears.2. Press Ok.3. Enter a four-digit password to open Code Memo, Ok.4. Reenter the new password to confirm.5. Enter a checkword (maximum 15 characters), Ok.The checkword can consist of both letters and numbers. To enter a number, press and hold the key.To add a new code1. Scroll to Organizer, Code Memo.2. Enter your password.3. Select New Code, Add.4. Enter a name associated with the code, for example, the name of the credit card company, Ok. 5. Enter the code, Ok.To open code memo1. Scroll to Organizer, Code Memo.2. Enter your password, Ok.Your entered checkword appears. When the decryption process has finished, your codes are shown.To change the password1. Open code memo as described above.2. Press More, Change Password.3. Enter your new password, Ok.4. Reenter the new password, Ok.5. Enter a checkword, Ok.Forgot your password?If you forget your password, just enter any password to access the Code memo function. The checkword and codes that are then shown are incorrect. You must now reset the Code memo. To reset code memo1. Press More, Reset.2. Reset code memo? appears. Press Yes. The Code memo is reset and all entries are cleared. The next time you enter the Code memo, you must start at “To open code memo for the first time” on page 69.CalendarYou can use the calendar to keep track of important meetings that you need to attend, phone calls that you need to make or tasks that you need to do.

This is the Internet version of the user's guide. © Print only for private use.70 More featuresThe calendar can be synchronized with a PC calendar or, using WAP, with a calendar on the Web. For more information see “Synchronization” on page 66.Appointments and tasksYou can save up to 300 appointments and 80 tasks in your calendar, depending on the size of each item. You can choose to add a new appointment or task, or to use an old appointment or task as a template by copying and editing it.Tip: When you are in the list of appointments and tasks for a certain day, you can press More to edit, delete, reschedule, send or copy. You can also call a number included in a phone call task.To add a new appointment1. Scroll to Organizer, Calendar, Add Appointment.2. Enter the appropriate information, for example, subject, location, icon and times. Confirm each entry with Ok, Select, or Save.3. If you want to set a reminder for your appointment, select a reminder.To add a new task1. Scroll to Organizer, Calendar, Task s , New Task, Add.2. Select a category.• If the category is a phone call, enter the phone number, Ok.3. Enter a subject, Ok.4. If you want to set a reminder for your appointment, press Yes. Save the date and time.Viewing your calendarTo view your calendar content, scroll to Organizer, Calendar, and then select one of the following:•View Today – All appointments for today as well as unfinished tasks are shown.•View Week – Move within and among the days by moving the joystick. Press Select to view a certain day.•View Month – Move within and among the days or weeks by moving the joystick. Press Select to view a certain week. Days on which you have appointments are marked in bold.Tip: In the monthly and weekly views, you can go to next week by pressing 3, to next month by pressing 6 and to next year by pressing 9. You can go back a week, a month or a year by pressing 1, 4, and 7 respectively. To reach the current day, press .

This is the Internet version of the user's guide. © Print only for private use.72 More featuresTo search for appointments or tasks1. Scroll to Organizer, Calendar, Advanced, Find.2. Check or uncheck if you want to search for appointments or tasks (if you have added any). Press Ok.3. Enter the text you want to search for, Ok.Appointments or tasks that match your search are shown. Select to view the item or edit, delete, reschedule, send, or copy the item by pressing More.Sound recorderWith the Sound recorder function, you can record either your own memos or calls. All participants in the call are automatically recorded. The recording is stopped if any party ends the call.The recordings are saved in your mobile phone and can be accessed even if you change your SIM card.Note: In some countries or states it is required by law that you inform the other person before recording the call.To record a call1. During the call press the joystick2. Select Record.To start a sound recording• Scroll to Pictures & Sounds, Record Sound.• Wait until you hear a tone. When the recording starts, the display shows Recording together with the time of the current recording.To end the recording• Press Stop.Tip: You can start recording or listening to recordings with a voice command. See “Voice control” on page 29.The recording stops automatically if you receive an incoming call or when the call ends. You hear a tone a few seconds before the memory is full.To listen to your recordings1. Scroll to Pictures & Sounds, My Sounds. 2. Select the recording you wish to hear. Press Play.To send a recording1. Scroll to Pictures & Sounds, My Sounds.2. Scroll to the recording you wish to send.3. Press More and select Send.

This is the Internet version of the user's guide. © Print only for private use.More features 73To delete or rename a sound recording1. Scroll to Pictures & Sounds, My Sounds.2. Scroll to the recording you wish to delete or rename.3. Press More when the recording is highlighted.4. Select Delete or Rename.EntertainmentYour phone has several entertaining applications and games. You can play some of the games with another person, both using your phone, or you can play on two phones, using Bluetooth wireless technology or infrared. You can also download games and applications directly to your phone. Help texts are available in some games and applications.To start an application1. Scroll to Entertainment, Games & More.2. Select an application, Start.To download an application1. Scroll to Entertainment, Games & More.2. Scroll to a direct link, Start.Note: Make sure the file sizes do not exceed the free memory in your phone. See “Checking the memory” on page 29. To start and end a game1. Scroll to Entertainment, Other Games.2. Select New Game, Start.3. Press More to read help texts.4. Press to end the game.To download a game1. Scroll to Entertainment, Other Games.2. Scroll to a direct link, Start.Tip: If you press More, you will get more information about your game.How to control the games:For most games you can use the joystick to move up, down, left or right and to select an item, or use the keys as follows: left up up right up left select/fire right left down down right down

This is the Internet version of the user's guide. © Print only for private use.74 More featuresNotesIf you need to remember something, you can make a note of it in your phone. You can add, edit, delete or send a note. You can save 10 notes.To add a note1. Scroll to Organizer, Notes, New Note, Add.2. Enter the note, Ok.To view the notes1. Scroll to Organizer, Notes.2. A list which shows the beginning of each note appears. Select the note that you want to view.Post noteYou can display a note in standby mode.To display a note in standby1. From standby, press More and scroll to Post Note.2. Select the note you want to display in standby or select New Note to write a new note.• If the note is long and you cannot see all of it, press More, Show Note.• To turn off the note in standby, press More, Hide Note.Exchanging notesYou can send and receive notes using Bluetooth wireless technology, the infrared port or picture messaging. To send a note1. Scroll to a note and press More to display the list of options.2. Select Send.3. Select a transfer method.To receive a note1. From standby, press More and scroll to Turn On Bluetooth or Turn On IR.Both the infrared port and the Bluetooth function are activated for ten minutes.2. Add note? appears. Press Save to save the note among your other notes.

This is the Internet version of the user's guide. © Print only for private use.Security 75SecuritySIM card lockThe SIM card lock protects your subscription, but not your phone itself, from unauthorized use. If you change SIM cards, the phone still works with the new SIM card.Most SIM cards are locked at the time of purchase. If the SIM card lock is on, you have to enter a “PIN” (Personal Identity Number) every time you turn on your phone.If you enter your PIN incorrectly three times in a row, the SIM card is blocked. This is indicated by the message PIN blocked.. To unblock it you need to enter your “PUK” (Personal Unblocking Key). Your PIN and PUK are supplied by your operator.To unblock your SIM card 1. PIN blocked. appears in the display.2. Enter your PUK and press Ok.3. Enter a new four- to eight-digit PIN and press Ok.4. Reenter the new PIN to confirm and press Ok.• To edit your PIN, scroll to Settings, Locks, SIM Lock, Change PIN.Note: If the message “Codes do not match.” appears, you entered the new PIN incorrectly. If the message “Wrong PIN.” appears, followed by “Old PIN:”, you entered your old PIN incorrectly.• To edit your PIN2, scroll to Settings, Locks, SIM Lock, Change PIN2.To turn the SIM card lock on or off1. Scroll to Settings, Locks, SIM Lock, Protection.2. Select On or Off.3. Enter your PIN and press Ok.Phone lockThe phone lock protects the phone against unauthorized use if it is stolen and the SIM card is exchanged. It is not on when you buy the phone. You can change the phone lock code (0000) to any four- to eight-digit personal code. The phone lock can be set to on, automatic or off.Phone lock onIf the phone lock is on, the message Phone locked. appears each time you turn on the phone. You have to enter your code followed by Yes to use your phone.

This is the Internet version of the user's guide. © Print only for private use.76 TroubleshootingAutomaticIf the phone lock is set to automatic, you do not need to enter your phone lock code until a different SIM card is inserted in the phone.• To edit your phone lock code, scroll to Settings, Locks, Phonelock, Change Code.Note: It is important that you remember your new code. If you should forget it, you will need to bring your phone in to your local Sony Ericsson retailer.To set the phone lock1. Scroll to Settings, Locks, Phonelock, Protection.2. Select an alternative.3. Enter the phone lock code and press Ok.TroubleshootingThis chapter lists some problems that you might encounter while using your phone. Some problems require that you call your service provider, but you can easily correct most of the problems yourself.The phone cannot be switched onHand-held phoneRecharge or replace the battery. See “SIM card and battery information” on page 5. No indication of chargingWhen you start charging a battery that is empty or a battery that has not been used for a long time, it may take up to 30 minutes before the battery icon appears in the display.Menu languageIf the display shows a language that you do not understand, you can always choose Automatic (determined by your SIM card) by pressing 8888 in standby. You can always choose English by pressing 0000 in standby.

This is the Internet version of the user's guide. © Print only for private use.Troubleshooting 77Grey menu optionsGrey text indicates a function that is temporarily unavailable, for example due to your subscription or due to a certain setting which has not been turned on.Since you cannot send themes, pictures and sounds that are copyright-protected, the Send menu is sometimes unavailable.Error messagesInsert SIM.There is no SIM card in the phone or you may have inserted it incorrectly. Insert a SIM card. See “SIM card and battery information” on page 5.Insert correct SIM card.The phone is set to work only with certain SIM cards. Insert the correct SIM card.Emergen. Calls OnlyYou are within range of a network, but you are not allowed to use it. However, in an emergency, some operators allow you to call the international emergency number 112. See “Making emergency calls” on page 24.No network.There is no network within range or the received signal is too weak. You have to move to get a signal that is strong enough.Wrong PIN./Wrong PIN2.You have entered your PIN or PIN2 incorrectly.• Enter the correct PIN or PIN2, and press Yes. See “SIM card lock” on page 75.Codes do not match.When you want to change a security code (for example, your PIN) you have to confirm the new code by entering it again. The two codes that you have entered do not match. See “SIM card lock” on page 75.PIN blocked./PIN2 blocked.You have entered your PIN or PIN2 incorrectly three times in a row. To unblock your phone, see “SIM card lock” on page 75.

This is the Internet version of the user's guide. © Print only for private use.78 Additional informationPUK blocked. Contact operator.You entered your personal unblocking key code (PUK) incorrectly 10 times in a row. Contact your network operator or service provider.Phone locked.The phone is locked. To unlock the phone, see “Phone lock” on page 75.Phone lock code:Your phone comes with the phone lock code, 0000. You can change it to any four- to eight-digit code. See “Phone lock” on page 75.Number not permitted.The Fixed Dialing function is on and the number you have dialed is not on your fixed numbers list. See “Fixed dialing” on page 39.Charging. Non-standard battery in use.The battery you are using is not a Sony Ericsson-approved battery and is charging slowly for safety reasons.Additional informationGuidelines for Safe and Efficient UsePlease read this information before using your mobile phone.RECOMMENDATIONS• Always treat your product with care and keep it in a clean and dust-free place.• Do not expose your product to liquid or moisture or humidity.• Do not expose your product to extreme high or low temperatures.• Do not expose your product to open flames or lit tobacco products.• Do not drop, throw or try to bend your product. • Do not paint your product.

This is the Internet version of the user's guide. © Print only for private use.Additional information 79• Do not use your product near medical equipment without requesting permission.• Do not use your product when in, or around aircraft, or areas posted “turn off two-way radio”. • Do not use your product in an area where a potentially explosive atmosphere exists.• Do not place your product or install wireless equipment in the area above your car’s air bag. • Do not attempt to disassemble your product. Only Sony Ericsson authorized personnel should perform service.• Do not direct the infrared ray at anyone’s eye and make sure that it does not disturb any other infrared units. • To avoid hearing impairment, accept the call before holding your product (or portable handsfree device) to your ear.ANTENNA Only use an antenna that has been specifically designed by Sony Ericsson for your mobile phone. Use of unauthorised or modified antennas could damage your mobile phone and may violate regulations, causing loss of performance and SAR levels above the recommended limits (see below).EFFICIENT USEHold your mobile phone as you would any other phone. Do not cover the top of the phone when in use, as this affects call quality and may cause the phone to operate at a higher power level than needed, thus shortening talk and standby times.RADIO FREQUENCY (RF) EXPOSURE AND SARYour mobile phone is a low-power radio transmitter and receiver. When it is turned on, it emits low levels of radio frequency energy (also known as radio waves or radio frequency fields).Governments around the world have adopted comprehensive international safety guidelines, developed by scientific organizations, e.g. ICNIRP (International Commission on Non-Ionizing Radiation Protection) and IEEE (The Institute of Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave

This is the Internet version of the user's guide. © Print only for private use.80 Additional informationexposure for the general population. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements.Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a mobile phone. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the mobile phone while operating can be well below this value. This is because the mobile phone is designed to use the minimum power required to reach the network. Variations in SAR below the radio frequency exposure guidelines do not mean that there are variations in safety. While there may be differences in SAR levels among mobile phones, all Sony Ericsson mobile phone models are designed to meet radio frequency exposure guidelines.Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (that is, at the ear and worn on the body) as required by the FCC for each model. For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when the handset is positioned a minimum of 15 mm from the body without any metal parts in the vicinity of the phone or when used with the original Sony Ericsson body worn accessory intended for this phone. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.A separate leaflet with SAR information for this mobile phone model is included with the material that comes with this mobile phone. This information can also be found, together with more information on radio frequency exposure and SAR, at: www.sonyericsson.comDRIVINGPlease verify whether local laws and regulations restrict the use of mobile phones while driving or require drivers to use handsfree solutions. We recommend that you use only Ericsson or Sony Ericsson handsfree solutions intended for use with your product. Please note that because of possible interference to electronic equipment, some vehicle manufacturers forbid the use of mobile phones in their vehicles unless a handsfree kit with an external antenna supports the installation. Always pay full attention to driving and pull off the road and park before making or answering a call if driving conditions so require. PERSONAL MEDICAL DEVICESMobile phones may affect the operation of cardiac pacemakers and other implanted equipment. Please avoid placing the mobile phone over the pacemaker,

This is the Internet version of the user's guide. © Print only for private use.Additional information 81e.g. in your breast pocket. When using the mobile phone, place it at the ear opposite the pacemaker. If a minimum distance of 15 cm (6 inches) is kept between the mobile phone and the pacemaker, the risk of interference is limited. If you have any reason to suspect that interference is taking place, immediately turn off your mobile phone. Contact your cardiologist for more information. For other medical devices, please consult the manufacturer of the device.CHILDRENDO NOT ALLOW CHILDREN TO PLAY WITH YOUR MOBILE PHONE OR ITS ACCESSORIES. THEY COULD HURT THEMSELVES OR OTHERS, OR COULD ACCIDENTALLY DAMAGE THE MOBILE PHONE OR ACCESSORY. YOUR MOBILE PHONE OR ITS ACCESSORY MAY CONTAIN SMALL PARTS THAT COULD BE DETACHED AND CREATE A CHOKING HAZARD.DISPOSING OF THE PRODUCT Your mobile phone should not be placed in municipal waste. Please check local regulations for disposal of electronic products.POWER SUPPLYConnect the AC power adapter only to designated power sources as marked on the product. Make sure the cord is positioned so that it will not be subjected to damage or stress. To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it. The AC power adapter must not be used outdoors or in damp areas. Never alter the cord or plug. If the plug will not fit into the outlet, have a proper outlet installed by a qualified electrician.EMERGENCY CALLSMobile phones operate using radio signals, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any mobile phone for essential communications (e.g. medical emergencies).Emergency calls may not be possible on all cellular networks or when certain network services and/or mobile phone features are in use. Check with your local service provider.BATTERY USE AND CAREWe recommend that you fully charge the battery before you use your mobile phone for the first time. The battery can only be charged in temperatures between +5°C (+41°F) and +45°C (+113°F).

This is the Internet version of the user's guide. © Print only for private use.82 Additional informationA new battery or one that has not been used for a long time could have reduced capacity the first few times it is used.The talk and standby times depend on the actual transmission conditions when using the mobile phone. If the mobile phone is used near a base station, less power is required and talk and standby times are prolonged. •Warning! May explode if disposed of in fire.• Use only Ericsson or Sony Ericsson branded original batteries and chargers intended for use with your mobile phone. Other chargers may not charge sufficiently or may produce excessive heat. Using other batteries and chargers could be dangerous.• Do not expose the battery to liquid.• Do not let the metal contacts on the battery touch another metal object. This could short-circuit and damage the battery.• Do not disassemble or modify the battery. • Do not expose the battery to extreme temperatures, never above +60°C (+140°F). For maximum battery capacity, use the battery at room temperature. • Turn off your mobile phone before removing the battery.• Keep out of children’s reach.• Use the battery for the intended purpose only.• Do not allow the battery to be put into the mouth. Battery electrolytes may be toxic if swallowed.DISPOSING OF THE BATTERYPlease check local regulations for disposal of batteries or call your local Sony Ericsson Customer Care Center for information.The battery should never be placed in municipal waste. Use a battery disposal facility if available.Limited WarrantySony Ericsson Mobile Communications AB, S-221 88 Lund, Sweden, (Sony Ericsson), provides this Limited Warranty for your mobile phone and original accessory delivered with your mobile phone (hereinafter referred to as “Product”).Should your Product need warranty service, please return it to the dealer from whom it was purchased, or contact your local Sony Ericsson Customer Care Center (national rates may apply) or visit www.SonyEricsson.com to get further information.

This is the Internet version of the user's guide. © Print only for private use.Additional information 83OUR WARRANTYSubject to the conditions of this Limited Warranty, Sony Ericsson warrants this Product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year.WHAT WE WILL DOIf, during the warranty period, this Product fails to operate under normal use and service, due to defects in design, materials or workmanship, Sony Ericsson authorized distributors or service partners, in the country/region* where you purchased the Product, will, at their option, either repair or replace the Product in accordance with the terms and conditions stipulated herein.Sony Ericsson and its service partners reserve the right to charge a handling fee if a returned Product is found not to be under warranty according to the conditions below.Please note that your personal settings/downloads might be lost when the Product is repaired or replaced.CONDITIONS1. The warranty is valid only if the original proof of purchase issued to the original purchaser by an, for this Product, Sony Ericsson authorized dealer, specifying the date of purchase and serial number**, is presented with the Product to be repaired or replaced. Sony Ericsson reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the Product from the dealer.2. If Sony Ericsson repairs or replaces the Product, the repaired or replaced Product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of Sony Ericsson.3. This warranty does not cover any failure of the Product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with the Sony Ericsson instructions for use and maintenance of the Product. Nor does this warranty cover any failure of the Product due to accident, software or hardware modification or adjustment, acts of God or damage resulting from liquid.4. Since the cellular system on which the Product is to operate is provided by a carrier independent from Sony Ericsson, Sony Ericsson will not be responsible for the operation, availability, coverage, services or range of that system.

This is the Internet version of the user's guide. © Print only for private use.84 Additional information5. This warranty does not cover Product failures caused by installations, modifications, or repair or opening of the Product performed by a non-Sony Ericsson authorized person.6. The warranty does not cover Product failures which have been caused by use of accessories or other peripheral devices which are not Ericsson or Sony Ericsson branded original accessories intended for use with the Product.7. Tampering with any of the seals on the Product will void the warranty.8. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL SONY ERICSSON OR ITS LICENSORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you.The warranty provided does not affect the consumer’s statutory rights under applicable legislation in force, nor the consumer’s rights against the dealer arising from their sales/purchase contract.* EUROPEAN UNION (EU)If you have purchased your Product in an EU country you can have your Product serviced, under the conditions set out above, within the warranty period in any EU country where an identical Product is sold by an authorized Sony Ericsson distributor. To find out if your Product is sold in the EU country you are in, please call the local Sony Ericsson Customer Care Center. Please observe that certain services may not be possible elsewhere than in the country of original purchase, for example, due to the fact that your Product may have an interior or exterior which is different from equivalent models sold in other EU countries. It may not be possible to repair SIM-locked Products.

This is the Internet version of the user's guide. © Print only for private use.Additional information 85** In some countries/regions additional information is requested. If so, this is clearly shown on the valid proof of purchase.FCC StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Declaration of ConformityWe, Sony Ericsson Mobile Communications AB ofNya VattentornetS-221 88 Lund, Sweden.declare under our sole responsibility that our productSony Ericsson type AAB-1021011-BVand in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards 3GPP TS 51.010-1, EN 301489-7, EN 300328, EN 301489-17 and EN 60950, following the provisions of, Radio Equipment and Telecommunication Terminal Equipment directive 99/5/EC with requirements covering EMC directive 89/336/EEC, and Low Voltage directive 73/23/EEC.We fulfill the requirements of the R&TTE Directive (99 5/EC).Lund, February 2003Place & date of issue 0682Kentaro Odaka, Head of Product Business Unit GSM/UMTS

This is the Internet version of the user's guide. © Print only for private use.86 IconsIconsThe table below shows icons which may appear in standby or in the menus.Icon DescriptionDesktop iconsYour personal phone book.Handling of text, pictures, email and voice messages.Handling of call time, call cost information and ongoing calls.Camera function.Handling of pictures, sounds and themes.Personal settings including profiles, display, language, time and locks.Gives you access to Internet services.Calendar, alarm clock and other extras.Receive items via Bluetooth, infrared, networks, data communications settings, WAP options and accessories.Create your own menu for the functions you use most often.Operator servicesGames and applications.StandbyDesktop icon.Handling of ongoing calls. Only available during calls.Tells you the strength of the GSM network signal.GPRS is within range.GPRS is within range and can be used.Tells you are in a premium charge zone.Tells you the status of the battery.You cannot receive any incoming calls.Icon Description

This is the Internet version of the user's guide. © Print only for private use.88 IconsA Bluetooth headset, added to your phone.A Bluetooth phone, added to your phone.A Bluetooth PC, added to your phone.A Bluetooth printer, added to your phone.A Bluetooth PDA, added to your phone.Other Bluetooth device.The appointment is a meeting.The appointment is a date.The appointment is to travel.The appointment is a vacation.The appointment is an anniversary.A miscellaneous appointment.A miscellaneous task.An all day calendar appointment.Icon DescriptionA reminder is set for a calendar appointment.The task is a phone call.A completed task in your calendar.A task or message of high priority.A task or message of low priority.PhonebookA home number in the phone book.A work number in the phone book.A mobile number in the phone book.An email address in the phone book.A picture is connected to the contact.MessagesA text message is saved on the SIM card.Icon Description

This is the Internet version of the user's guide. © Print only for private use.Icons 89A voice message has not been checked.A message has not been read.A theme is attached to a message.A message has been read.Only part of a read email message is saved in the phone.Only part of an unread email or a multimedia message is saved in the phone.A read message will be deleted the next time you connect to the server.An unread message will be deleted the next time you connect to the server.A damaged message.A read picture message.An unread picture message.The message has not been sent.The message has been sent.Icon DescriptionA message has been read by the recipient.A message has been delivered to the recipient.A sent message that has expired or been rejected by the recipient.Pre-defined message template (not editable).User-defined message template.A note is posted in standby.A picture message is playing.A picture message has been stopped.A picture message has been paused.Picture could not be shown.A business card is attached to a picture message.An event is attached to a picture message.Icon Description

This is the Internet version of the user's guide. © Print only for private use.90 IconsA theme is attached to a picture message.A picture message contains a melody.A picture message contains a recorded sound.Cursor in a picture message.More message options.Chat message prompt.CallsA missed call in the call list.An answered call in the call list.A dialed number in the call list.Call from a number on the SIM card.Your magic word is active.Icon DescriptionMultimediaAn i-Melody saved in My Sounds.An e-Melody saved in My Sounds.A polyphonic melody saved in My Sounds.CameraLarge picture size. Small picture size.Text inputT9 text input. Upper- & lower-case letters.Upper-case letters.Lower-case letters.Icon Description

This is the Internet version of the user's guide. © Print only for private use.Index 91IndexAAbout 4Alarm clock 67Answering mode 21Area information 47BBattery 5Bluetooth wireless technology 63Business cards 28CCalculator 68Calendar 69Call costs 34, 40calling card 38, 40credit limit 35minute minder 20Call time 34Callsaccept 40answer 6, 25automatic re-dialling 24call list 25divert 35emergency 24fixed dialling 39groups 27international 24make 6, 23missed 25put on hold 36receive 6, 24reject 25restrict 39speed dialling 29Cell information 47Chat 46Code memo 68Conference calls 37Contacts 26Contrast (display) 21Credit limit 40DData calls 66Declaration of conformity 85Desktop 7Displaycontrast 21greeting 21icons 86light 21Diverting calls 35Downloading 62Drawing pictures 17EE-mail 48gateway 55settings 55, 59Emergency calls 24Error messages 77FFax, sending and receiving 66Fixed dialling 39GGames 73GPRS 56Greeting 21Groups 27closed user groups 40conference calls 37

This is the Internet version of the user's guide. © Print only for private use.92 IndexHHandsfree 21Help texts 11IIcons (display) 86Infrared port 65International calls 24International emergency number 24KKey functions 8Key sound 20Keypad lock 22LLanguage (display) 20Lockskeypad 22phone 75SIM card 75MMagic word 32Melodies, see Ring signals 19Melody composer 19Menu language 20Minute minder 20, 40Mirror 51Missed calls 25MMS 44MMS, see Multimedia messages 44Multimedia messages 44Multimedia Messaging Service 44Multitap text input 13My numbers 22My shortcuts 22NNavigating the menus 7Networks 6, 41Notes 74OOnline services 11Own number 22PPasskey 63Personal ring signal 20Phone book 26check memory 29Phone lock 75Picture editor 17Picture messages 44Picture messaging 44Pictures 16background picture 17draw 17edit 17exchange 18PINchange 75enter 6PIN2change 75Profiles 22PUK 75QQuick keys 9RRedialling 24Reset 23Restrict messages 46Ring signals 19

This is the Internet version of the user's guide. © Print only for private use.Index 93SScreen saver 18SecurityWAP 57Shortcuts 9, 22Silent ring signal 19SIM card 11copy contacts 28unblock 75SIM card lock 75SMS, see Text messages 42Sound recorder 72Speed dialling 29Stopwatch 68Synchronization 66TT9 Text input 14Taking pictures 50Text messages 42e-mail gateway 55Themes 16Time settings 21Timer 68Turning the phone on/off 6Two voice lines 38VVibrating alert 20Voice answering 31Voice control 29Voice dialling 30Voice mail 34WWAPbookmarks 61options 61security 57settings (manual) 54settings (text message) 53settings (wizard) 53Warranty 82

This is the Internet version of the user's guide. © Print only for private use.94 Index

Navigation menu