Sony CIA-2002 FM radio transmitter User Manual Wadner A8 UG P2C
Sony Mobile Communications Inc FM radio transmitter Wadner A8 UG P2C
Sony >
Exhibit 8 user manual
Draft for Sony Ericsson internal use only
MMR-60 ENGLISH
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player
and play the music you want to listen to.
2. Receiver: Tune into an unused (“white
noise“) frequency channel.
3. Attach the MMR-60 to your phone.
4. Phone: In the pop-up, select the same
frequency as for the receiver. To select
the suggested frequency, press OK. To
manually enter a frequency, press Edit.
Delete the suggested frequency, enter the
frequency you want (use * to enter .) and
press OK twice.
Factors Affecting the Sound Quality:
•Sound settings in the phone.
Recommended: Set the volume level to
80% and the equalizer option to Normal.
•Solid objects between the transmitter and
the antenna of the receiver.
•Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of
different events:
•Continual blinks - no connection
•A few blinks at a rapid pace - confirmation
•Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that
indicates transmission. Go to Settings,
the Connectivity tab, Accessories,
MMR-60 and select Light effect.
MMR-60 Characteristics
•Plays music from the Media player over
the FM-radio frequency band.
•Remembers the last used frequency.
•Range of up to 10 meters.
•Mutes the music during calls.
•Powered by the phone.
•Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
•Follow regional guidelines/legislation for
use of FM-radio transmitters.
•The MMR-60 will not work in Music only
mode.
•The MMR-60 are not to be used in air-
planes.
FRENCH
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player
and play the music you want to listen to.
2. Receiver: Tune into an unused (“white
noise“) frequency channel.
3. Attach the MMR-60 to your phone.
4. Phone: In the pop-up, select the same
frequency as for the receiver. To select
the suggested frequency, press OK. To
manually enter a frequency, press Edit.
Delete the suggested frequency, enter the
frequency you want (use * to enter .) and
press OK twice.
Factors Affecting the Sound Quality:
•Sound settings in the phone.
Recommended: Set the volume level to
80% and the equalizer option to Normal.
•Solid objects between the transmitter and
the antenna of the receiver.
•Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of
different events:
•Continual blinks - no connection
•A few blinks at a rapid pace - confirmation
•Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that
indicates transmission. Go to Settings,
the Connectivity tab, Accessories,
MMR-60 and select Light effect.
MMR-60 Characteristics
•Plays music from the Media player over
the FM-radio frequency band.
•Remembers the last used frequency.
•Range of up to 10 meters.
•Mutes the music during calls.
•Powered by the phone.
•Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
•Follow regional guidelines/legislation for
use of FM-radio transmitters.
•The MMR-60 will not work in Music only
mode.
•The MMR-60 are not to be used in air-
planes.
SPANISH
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player
and play the music you want to listen to.
2. Receiver: Tune into an unused (“white
noise“) frequency channel.
3. Attach the MMR-60 to your phone.
4. Phone: In the pop-up, select the same
frequency as for the receiver. To select
the suggested frequency, press OK. To
manually enter a frequency, press Edit.
Delete the suggested frequency, enter the
frequency you want (use * to enter .) and
press OK twice.
Factors Affecting the Sound Quality:
•Sound settings in the phone.
Recommended: Set the volume level to
80% and the equalizer option to Normal.
•Solid objects between the transmitter and
the antenna of the receiver.
•Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of
different events:
•Continual blinks - no connection
•A few blinks at a rapid pace - confirmation
•Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that
indicates transmission. Go to Settings,
the Connectivity tab, Accessories,
MMR-60 and select Light effect.
MMR-60 Characteristics
•Plays music from the Media player over
the FM-radio frequency band.
•Remembers the last used frequency.
•Range of up to 10 meters.
•Mutes the music during calls.
•Powered by the phone.
•Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
•Follow regional guidelines/legislation for
use of FM-radio transmitters.
•The MMR-60 will not work in Music only
mode.
•The MMR-60 are not to be used in air-
planes.
PORTUGUESE
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player
and play the music you want to listen to.
2. Receiver: Tune into an unused (“white
noise“) frequency channel.
3. Attach the MMR-60 to your phone.
4. Phone: In the pop-up, select the same
frequency as for the receiver. To select
the suggested frequency, press OK. To
manually enter a frequency, press Edit.
Delete the suggested frequency, enter the
frequency you want (use * to enter .) and
press OK twice.
Factors Affecting the Sound Quality:
•Sound settings in the phone.
Recommended: Set the volume level to
80% and the equalizer option to Normal.
•Solid objects between the transmitter and
the antenna of the receiver.
•Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of
different events:
•Continual blinks - no connection
•A few blinks at a rapid pace - confirmation
•Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that
indicates transmission. Go to Settings,
the Connectivity tab, Accessories,
MMR-60 and select Light effect.
MMR-60 Characteristics
•Plays music from the Media player over
the FM-radio frequency band.
•Remembers the last used frequency.
•Range of up to 10 meters.
•Mutes the music during calls.
•Powered by the phone.
•Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
•Follow regional guidelines/legislation for
use of FM-radio transmitters.
•The MMR-60 will not work in Music only
mode.
•The MMR-60 are not to be used in air-
planes.
ENGLISH
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player
and play the music you want to listen to.
2. Receiver: Tune into an unused (“white
noise“) frequency channel.
3. Attach the MMR-60 to your phone.
4. Phone: In the pop-up, select the same
frequency as for the receiver. To select
the suggested frequency, press OK. To
manually enter a frequency, press Edit.
Delete the suggested frequency, enter the
frequency you want (use * to enter .) and
press OK twice.
Factors Affecting the Sound Quality:
•Sound settings in the phone.
Recommended: Set the volume level to
80% and the equalizer option to Normal.
•Solid objects between the transmitter and
the antenna of the receiver.
•Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of
different events:
•Continual blinks - no connection
•A few blinks at a rapid pace - confirmation
•Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that
indicates transmission. Go to Settings,
the Connectivity tab, Accessories,
MMR-60 and select Light effect.
MMR-60 Characteristics
•Plays music from the Media player over
the FM-radio frequency band.
•Remembers the last used frequency.
•Range of up to 10 meters.
•Mutes the music during calls.
•Powered by the phone.
•Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
•Follow regional guidelines/legislation for
use of FM-radio transmitters.
•The MMR-60 will not work in Music only
mode.
•The MMR-60 are not to be used in air-
planes.
Wadner_A8_UG_P2C.fm Page 1 Friday, October 14, 2005 9:29 AM
Draft for Sony Ericsson internal use only
MMR-60 ENGLISH
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player
and play the music you want to listen to.
2. Receiver: Tune into an unused (“white
noise“) frequency channel.
3. Attach the MMR-60 to your phone.
4. Phone: In the pop-up, select the same
frequency as for the receiver. To select
the suggested frequency, press OK. To
manually enter a frequency, press Edit.
Delete the suggested frequency, enter the
frequency you want (use * to enter .) and
press OK twice.
Factors Affecting the Sound Quality:
•Sound settings in the phone.
Recommended: Set the volume level to
80% and the equalizer option to Normal.
•Solid objects between the transmitter and
the antenna of the receiver.
•Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of
different events:
•Continual blinks - no connection
•A few blinks at a rapid pace - confirmation
•Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that
indicates transmission. Go to Settings,
the Connectivity tab, Accessories,
MMR-60 and select Light effect.
MMR-60 Characteristics
•Plays music from the Media player over
the FM-radio frequency band.
•Remembers the last used frequency.
•Range of up to 10 meters.
•Mutes the music during calls.
•Powered by the phone.
•Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
•Follow regional guidelines/legislation for
use of FM-radio transmitters.
•The MMR-60 will not work in Music only
mode.
•The MMR-60 are not to be used in air-
planes.
FCC Statement
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) This device must accept any
interference received, including
interference that may cause undesired
operation.
LZT 108 8157/1 P1C
Wadner_A8_UG_P2C.fm Page 2 Friday, October 14, 2005 9:29 AM