Sony DDA-2011 Bluetooth headset User Manual Alp down UG

Sony Mobile Communications Inc Bluetooth headset Alp down UG

08 user manual

Sony Ericsson Mobile Communications ABSE-221 88 Lund, Sweden1202-2042.1Printed in XXXXXUser guideEnglishLanguageLanguageLanguage12Indicator lightIndicator lightIncrease volumeIncrease volumeCall handling keyCall handling keyCharging connectorCharging connectorDecrease volumeDecrease volumeSpeakerSpeakerEar hookEar hookMicrophoneMicrophone345First time charging: about 8 hoursNormal charging: about 2 hoursFirst time charging: about 8 hoursNormal charging: about 2 hoursBattery needs chargingBattery needs chargingChargingChargingFully chargedFully chargedCLA-60/CLA-61CST-61CST-60/CST-70/CST-7567xxx xxx xxFCC StatementThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Declaration of conformity for HBH-PV703We, Sony Ericsson Mobile Communications AB ofNya VattentornetSE-221 88 Lund, Swedendeclare under our sole responsibility that our productSony Ericsson type DDA-0002011to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.7.1, EN 301 489-7:V1.3.1, EN 301 489-17:V1.2.1 and EN 60950-1:2006 following the provisions of Radio Equipment and Telecommunication Equipment directive 1999/5/EC.Lund, September 2007Jacob Sten, Head of Product Business Unit AccessoriesWe fulfil the R&TTE Directive.We fulfil the R&TTE Directive.EnglishThe Bluetooth™ headset HBH-PV703 can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This User guide focuses on usage with a Sony Ericsson mobile phone.Charging the headsetBefore using the HBH-PV703 for the first time, charge it with, for example, the supplied charger or your phone charger, see figure 3. For compatible chargers, see figure 4.Pairing the headsetBefore you can use the headset it has to be paired once with your phone. Upon a successful pairing, the headset will automatically connect to the phone as soon as it is turned on and within range.To pair the headset with your phone1. Make sure the headset is turned off.2. Turn on the Bluetooth function in the phone. For instructions, see the phone User guide.3. Turn on Bluetooth visibility in the phone. This makes the phone visible to other Bluetooth devices.4. Place the phone within 20 cm (8 inches) from the headset.5. Press and hold down the call handling key until the headset beeps, shows a steady green light and then flashes red and green alternately. If the indicator light only flashes green or red, simultaneously press and hold down both volume keys until the headset beeps and flashes green and red alternately.6. Press Yes when Add device? appears in the phone. If required, the passcode is 0000. The headset beeps and flashes green when successfully paired.Note: If auto pairing is not supported by your phone, or not successful, follow the first 5 steps above. Then add the headset to your phone as described in the phone User guide. The passcode is 0000.Putting on the headsetSee figure 5. Make sure you twist the speaker round into your ear. For left ear use, change the position of the ear hook as instructed.Turning on and off the headsetTo turn on the headset•Press and hold down the call handling key until the indicator light shows a steady green light. It will then start flashing green.To turn off the headset•Press and hold down the call handling key until the indicator light shows a steady green light. It will then turn off.CallingWhen you have paired the headset with your phone, you can make and receive calls as long as the headset is turned on.Solid objects, walls and a greater distance than 5 metres (16.5 feet) can affect the sound quality negatively. For best performance, wear the headset and the phone on the same side of your body.To make a call•Use the phone keys, and dial the number in the same way as you would normally do. The call is automatically activated in the headset.To end a call•Press the call handling key briefly.To answer a call•Press the call handling key briefly.To reject a call•Press and hold down the call handling key until you hear a short beep (after 2 seconds).To redial the last number•Press the call handling key twice within a second.To turn off the microphone (mute)•Simultaneously press both volume keys. Repeat to turn on the microphone again.Adjusting volumeTo adjust the ring volume•When you are not engaged in a call, or while the phone is ringing, press a volume key.To adjust the speaker volume•During a call, press a volume key.Calling using voice commandsVoice commands can be useful when you are using the headset and the phone is not close at hand. For more information on voice commands, see your phone User guide.To make a call using voice commands•Press the call handling key briefly, wait for a beep and say your command.Note: Make sure voice commands are enabled and recorded in your phone before you try to use them.Transferring soundTo transfer the sound from the phone to the headset•During a call on the phone, press the call handling key briefly. The sound is transferred to the headset.To transfer the sound from the headset to the phone•See the phone User guide.Resetting the headsetReset the headset if it behaves unexpectedly.To reset the headset1. Simultaneously press and hold down both volume keys until the headset beeps and flashes red and green alternately.2. Simultaneously press and hold down both volume keys until the headset turns off.3. Pair the headset with the phone in the same way as you paired it the first time.BatteryA battery that has been infrequently used, or a new one, could have reduced capacity. It may need to be recharged a number of times.When the battery needs charging, the indicator light flashes red and you hear a low beep. If you do not charge the headset, it automatically turns off.To check the battery status•Simultaneously press both volume keys briefly:•one green flash – the battery needs charging soon•two green flashes – the battery is medium full•three green flashes – the battery is fully chargedAttaching the strapTo attach the enclosed strap, see figure 6.Viewing regulatory informationTo view the regulatory information, see figure 7.TroubleshootingNo connection to the phoneMake sure the headset is charged and within range of the phone. Check or redo the Bluetooth settings in the phone. Try to pair the headset again.Unexpected behaviour•Reset the headset.Redial does not workIf the call list in the phone is empty you cannot use the redial function.Language 2HBH-PV703Alp_down-UG.book Page 1 Friday, September 14, 2007 1:46 PM
Sony Ericsson Mobile Communications ABSE-221 88 Lund, Sweden1202-2042.1Printed in XXXXXBluetooth™ Headset HBH-PV703User guideUser guideUser guideUser guideSony Ericsson HBH-PV703This User guide is published by Sony Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this User guide. All rights reserved.©Sony Ericsson Mobile Communications AB, 2007Publication number: 1202-2042.1Some of the services in this User guide are not supported by all networks. This also applies to the GSM International Emergency Number 112. Contact your network operator or service provider if you are in doubt whether you can use a particular service.The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Ericsson is under license.Sony and WALKMAN are trademarks or registered trademarks of Sony Corporation.Ericsson is a trademark or registered trademark of Telefonaktiebolaget LM Ericsson. 12This product is leadfree and halogenfree.Indicator lightIndicator lightIncrease volumeIncrease volumeCall handling keyCall handling keyCharging connectorCharging connectorDecrease volumeDecrease volumeSpeakerSpeakerEar hookEar hookMicrophoneMicrophone345First time charging: about 8 hoursNormal charging: about 2 hoursFirst time charging: about 8 hoursNormal charging: about 2 hoursBattery needs chargingBattery needs chargingChargingChargingFully chargedFully chargedCLA-60/CLA-61CST-61CST-60/CST-70/CST-7567xxx xxx xxLanguage 3The Bluetooth™ headset HBH-PV703 can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This User guide focuses on usage with a Sony Ericsson mobile phone.Charging the headsetBefore using the HBH-PV703 for the first time, charge it with, for example, the supplied charger or your phone charger, see figure 3. For compatible chargers, see figure 4.Pairing the headsetBefore you can use the headset it has to be paired once with your phone. Upon a successful pairing, the headset will automatically connect to the phone as soon as it is turned on and within range.To pair the headset with your phone1. Make sure the headset is turned off.2. Turn on the Bluetooth function in the phone. For instructions, see the phone User guide.3. Turn on Bluetooth visibility in the phone. This makes the phone visible to other Bluetooth devices.4. Place the phone within 20 cm (8 inches) from the headset.5. Press and hold down the call handling key until the headset beeps, shows a steady green light and then flashes red and green alternately. If the indicator light only flashes green or red, simultaneously press and hold down both volume keys until the headset beeps and flashes green and red alternately.6. Press Yes when Add device? appears in the phone. If required, the passcode is 0000. The headset beeps and flashes green when successfully paired.Note: If auto pairing is not supported by your phone, or not successful, follow the first 5 steps above. Then add the headset to your phone as described in the phone User guide. The passcode is 0000.Putting on the headsetSee figure 5. Make sure you twist the speaker round into your ear. For left ear use, change the position of the ear hook as instructed.Turning on and off the headsetTo turn on the headset•Press and hold down the call handling key until the indicator light shows a steady green light. It will then start flashing green.To turn off the headset•Press and hold down the call handling key until the indicator light shows a steady green light. It will then turn off.CallingWhen you have paired the headset with your phone, you can make and receive calls as long as the headset is turned on.Solid objects, walls and a greater distance than 5 metres (16.5 feet) can affect the sound quality negatively. For best performance, wear the headset and the phone on the same side of your body.To make a call•Use the phone keys, and dial the number in the same way as you would normally do. The call is automatically activated in the headset.To end a call•Press the call handling key briefly.To answer a call•Press the call handling key briefly.To reject a call•Press and hold down the call handling key until you hear a short beep (after 2 seconds).To redial the last number•Press the call handling key twice within a second.To turn off the microphone (mute)•Simultaneously press both volume keys. Repeat to turn on the microphone again.Adjusting volumeTo adjust the ring volume•When you are not engaged in a call, or while the phone is ringing, press a volume key.To adjust the speaker volume•During a call, press a volume key.Calling using voice commandsVoice commands can be useful when you are using the headset and the phone is not close at hand. For more information on voice commands, see your phone User guide.To make a call using voice commands•Press the call handling key briefly, wait for a beep and say your command.Note: Make sure voice commands are enabled and recorded in your phone before you try to use them.Transferring soundTo transfer the sound from the phone to the headset•During a call on the phone, press the call handling key briefly. The sound is transferred to the headset.To transfer the sound from the headset to the phone•See the phone User guide.Resetting the headsetReset the headset if it behaves unexpectedly.To reset the headset1. Simultaneously press and hold down both volume keys until the headset beeps and flashes red and green alternately.2. Simultaneously press and hold down both volume keys until the headset turns off.3. Pair the headset with the phone in the same way as you paired it the first time.BatteryA battery that has been infrequently used, or a new one, could have reduced capacity. It may need to be recharged a number of times.When the battery needs charging, the indicator light flashes red and you hear a low beep. If you do not charge the headset, it automatically turns off.To check the battery status•Simultaneously press both volume keys briefly:•one green flash – the battery needs charging soon•two green flashes – the battery is medium full•three green flashes – the battery is fully chargedAttaching the strapTo attach the enclosed strap, see figure 6.Viewing regulatory informationTo view the regulatory information, see figure 7.TroubleshootingNo connection to the phoneMake sure the headset is charged and within range of the phone. Check or redo the Bluetooth settings in the phone. Try to pair the headset again.Unexpected behaviour•Reset the headset.Redial does not workIf the call list in the phone is empty you cannot use the redial function.Language 4Alp_down-UG.book Page 1 Friday, September 14, 2007 1:46 PM

Navigation menu