Sony FB021012 Licensed Transmitter User Manual P910i User Guide

Download:
Mirror Download [FCC.gov]
Document ID	451956
Application ID	9QOAu4DG5tQrcn5u8pGHkw==
Document Description	Exhibit 8 user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	245.18kB (3064689 bits)
Date Submitted	2004-07-21 00:00:00
Date Available	2004-07-21 00:00:00
Creation Date	2004-07-06 10:32:12
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2004-07-07 10:07:55
Document Title	P910i User Guide
Document Creator	FrameMaker 6.0
Document Author:	Sony Ericsson Mobile Communications AB

P910i
User Guide
Letters
Lowercase letters are written below the arrow and uppercase
letters in line with the arrow.
i 1
j 1
t 2
x1
Accented letters
Write the character as described above, then write the accent
above the arrow. Other such characters, for example, ö and ü,
follow the same principle.
Note Start each stroke at the dotted end.
Note Start each stroke at the dotted end.
Numbers
Numbers are written above the arrow.
Note Start each stroke at the dotted end.
or
Contents
Introduction ................................................................. 9
Entering text with the flip closed ..................................... 32
Entering text with the flip open ....................................... 33
P910i locks....................................................................... 37
Getting to know your P910i...................................... 10
Phone.......................................................................... 40
OVERVIEW
P910i package................................................................... 10
P910i overview ................................................................. 11
SIM card. .......................................................................... 12
Battery .............................................................................. 12
Care instructions ............................................................... 13
First time start-up.............................................................. 14
Turning your P910i on and off ......................................... 14
Importing phonebook entries............................................ 14
Flip closed mode............................................................... 15
Flip open mode ................................................................. 16
Flip removed..................................................................... 17
Screen areas ...................................................................... 18
Jog Dial ............................................................................ 19
Keypad functions ............................................................. 20
Indicators and status bar icons.......................................... 21
Memory Stick ................................................................... 22
Connecting the accessories............................................... 24
Services............................................................................. 25
Applications - overview.................................................... 25
Updating the software....................................................... 28
General functions.............................................................. 28
Call handling with the flip closed ....................................
Call handling with the flip open ......................................
Handling two or more calls..............................................
Call list and call log .........................................................
Hints and smart functions ................................................
Preferences.......................................................................
40
43
45
47
48
53
MEDIA
CommuniCorder....................................................... 59
Recording video clips ...................................................... 59
Taking pictures ................................................................ 61
Camera settings................................................................ 63
Pictures and Image editor ........................................ 64
Pictures ............................................................................ 64
Image editor ..................................................................... 66
Video .......................................................................... 68
Video clips ....................................................................... 68
Streaming ......................................................................... 70
Preferences....................................................................... 71
Music player............................................................... 73
Playing sound files............................................................ 73
Managing sound files........................................................ 74
Internet ....................................................................... 77
Using the browser view .................................................... 78
Using the bookmark view................................................. 81
Preferences........................................................................ 83
Games ......................................................................... 85
Chess................................................................................. 85
Solitaire............................................................................. 85
BUSINESS
Messages..................................................................... 87
Folders in Messages.......................................................... 88
The accounts in Messages ................................................ 89
Handling text messages .................................................... 89
Handling multimedia messages ........................................ 90
Handling email.................................................................. 94
More about messaging...................................................... 98
Contacts.................................................................... 101
Using Contacts with the flip closed ................................ 101
Using Contacts with the flip open .................................. 103
Creating and editing contacts.......................................... 104
Managing contacts .......................................................... 106
Making an owner card .................................................... 107
Preferences...................................................................... 107
Calendar .................................................................. 108
Creating calendar entries................................................
Managing calendar entries .............................................
Sending and receiving calendar entries..........................
Preferences .....................................................................
108
109
110
110
Tasks ........................................................................ 111
Creating task entries.......................................................
Managing task entries ....................................................
Moving task entries........................................................
Sending and receiving task entries.................................
Preferences .....................................................................
111
112
112
113
113
Jotter ........................................................................ 114
Creating and editing notes .............................................
Drawing pictures ............................................................
Managing notes..............................................................
Sending and receiving notes ..........................................
114
115
115
115
TOOLS
Sound recorder........................................................ 116
Making sound recordings............................................... 116
Using sound recordings as ring signals.......................... 117
Sending sound recordings .............................................. 117
Calculator ................................................................ 118
Time.......................................................................... 119
Setting time and date...................................................... 119
Specifying workdays...................................................... 120
Setting locations ............................................................. 120
Setting number formats .................................................. 120
Setting alarms ................................................................. 121
Viewers and editors – Quickoffice ......................... 122
Common viewer and editor functions ............................ 122
Quickword ...................................................................... 123
Quicksheet ..................................................................... 123
Pdf+ .............................................................................. 124
File manager ............................................................ 125
Online services ......................................................... 127
ADVANCED FUNCTIONS
PC Suite and multimedia for P910i ....................... 128
Remote synchronization ................................................ 139
Backing up data ............................................................. 140
Restoring data ................................................................ 141
SETTINGS
Personalizing your P910i........................................ 142
Themes...........................................................................
Changing your application shortcuts .............................
Setting a background picture .........................................
Setting the light intensity ...............................................
Setting a screen saver.....................................................
Adding images to your Contacts....................................
Ring signals....................................................................
Alarm tones and sound notification ...............................
142
142
142
142
143
143
143
144
Sony Ericsson PC Suite .................................................. 128
Multimedia for P910i...................................................... 129
Control panel........................................................... 145
Installing applications ............................................. 130
145
145
147
147
147
147
149
149
150
151
Installing applications on your P910i ............................. 130
Removing applications from your P910i........................ 132
Sony Ericsson Update Service........................................ 132
Connecting to other devices.................................... 133
Connection via SyncStation............................................ 133
Connection via Infrared port........................................... 134
Connection via Bluetooth wireless technology .............. 134
Synchronization and backup.................................. 138
The Device tab
Application shortcuts .....................................................
Display ...........................................................................
Flight mode ....................................................................
International ...................................................................
Locks..............................................................................
Sounds and alerts ...........................................................
Text input .......................................................................
Themes...........................................................................
Time & date ...................................................................
User greeting..................................................................
Local synchronization..................................................... 138
The Connections tab
Bluetooth......................................................................... 151
Cable ............................................................................... 152
GSM Networks ............................................................... 152
Infrared ........................................................................... 153
Internet accounts............................................................. 153
Messaging accounts ........................................................ 157
WAP accounts ................................................................ 163
REFERENCE
The Other tab
Certificate manager......................................................... 164
Flip settings..................................................................... 165
Format disk ..................................................................... 165
IP Security manager........................................................ 165
Language selection ......................................................... 165
Master reset..................................................................... 166
Secure tokens .................................................................. 166
Storage manager ............................................................. 167
WIM PIN settings ........................................................... 168
Terms and definitions............................................. 187
Getting started with Internet and Messages ......... 169
Introduction..................................................................... 169
Automatically set up service provider and messaging ... 170
Manually set up service provider.................................... 170
Manually set up messaging............................................. 171
Setting up WAP accounts ............................................... 172
Using your P910i as a modem ........................................ 172
GPRS - connection information...................................... 174
Troubleshooting ...................................................... 176
Guidelines for Safe and Efficient Use ................... 182
Limited warranty............................................................
FCC Statement ...............................................................
Environmental information............................................
Declaration of Conformity.............................................
184
186
186
186
Technical data ......................................................... 195
Index......................................................................... 199
Sony Ericsson P910i
User Guide
First edition (June 2004)
This User Guide is published by Sony Ericsson Mobile Communications AB,
without any warranty. Improvements and changes to this User Guide necessitated
by typographical errors, inaccuracies of current information, or improvements to
programs and/or equipment, may be made by Sony Ericsson Mobile
Communications AB at any time and without notice. Such changes will, however,
be incorporated into new editions of this User Guide.
©Sony Ericsson Mobile Communications AB, 2004. All rights reserved.
Publication number: AE/LZT 162 01 PA1
The Bluetooth™ word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Sony Ericsson is under license.
Symbian and all Symbian-based marks and logos are trademarks of Symbian
Limited.
Memory Stick™, Memory Stick Duo™ and Memory Stick PRO Duo™ are
trademarks of Sony, its parent and/or its affiliates.
Beatnik is a trademark of Beatnik, Inc.
T9™ Text Input is a trademark or a registered trademark of Tegic Communications
T9™ Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No.
1,331,057, United Kingdom Pat. No. 2238414B, Hong Kong Standard Pat. No.
HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional patents are
pending worldwide.
Quicksheet, Quickoffice and Quickword are either trademarks or registered
trademarks of Cutting Edge Software, Inc.
Adobe and Acrobat are either trademarks or registered trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
Microsoft Outlook, Visual Basic, Windows and PowerPoint are either registered
trademarks or trademarks of Microsoft Corporation in the Unites States and/or
other countries
Apple is a trademark of Apple Corporation, Inc.
AppForge is a trademark of AppForge, Inc
Lotus Notes and Lotus Organizer are trademarks of International Business
Machines Corporation in the United States, other countries, or both.
This product contains software copyright © Beatnik, Inc.
1996-2002.
Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other countries.End-user
license agreement for Sun™ Java™ J2ME™:
1. Restrictions: Software is confidential copyrighted information of Sun and title to
all copies is retained by Sun and/or its licensors. Customer shall not modify,
decompile, disassemble, decrypt, extract, or otherwise reverse engineer Software.
Software may not be leased, assigned, or sublicensed, in whole or in part.
2. Export Regulations: Software, including technical data, is subject to U.S. export
control laws, including the U.S. Export Administration Act and its associated
regulations, and may be subject to export or import regulations in other countries.
The Customer agrees to comply strictly with all such regulations and
acknowledges that it has the responsibility to obtain licenses to export, re-export,
or import Software. Software may not be downloaded, or otherwise exported or
re-exported (i) into, or to a national or resident of, Cuba, Iraq, Iran, North Korea,
Libya, Sudan, Syria (as such listing may be revised from time to time) or any
country to which the U.S. has embargoed goods; or (ii) to anyone on the U.S.
Treasury Department's list of Specially Designated Nations or the U.S. Commerce
Department's Table of Denial Orders.
3. Restricted Rights: Use, duplication or disclosure by the United States
government is subject to the restrictions as set forth in the Rights in Technical Data
and Computer Software Clauses in DFARS 252.227-7013(c) (1) (ii) and FAR
52.227-19(c) (2) as applicable.
Copyright © SyncML initiative Ltd. (1999-2002). All rights reserved.
Portions of software © PacketVideo Corporation (USA) 1999, 2002. PacketVideo,
pvPlayer and the PacketVideo logo are trademarks of PacketVideo Corporation.
All rights reserved.
Other product and company names mentioned herein may be the trademarks of
their respective owners.
Any rights not expressly granted herein are reserved.
Note Some of the services in this User Guide are not supported by all networks.
This also applies to the GSM International Emergency Number 112. Please contact
your network operator or service provider if you are in doubt whether you can use
a particular service or not.
Important
Your mobile phone has the capability to load, store and forward additional content,
e.g. ring tone melodies. The use of such content may be restricted or prohibited by
rights of third parties, including but not limited to restriction under applicable
copyright laws. You, and not Sony Ericsson, are entirely responsible for additional
content that you download to or forward from your mobile phone. Prior to your use
of any additional content, please verify that your intended use is properly licensed
or is otherwise authorized. Sony Ericsson does not guarantee the accuracy,
integrity or quality of any additional content or any other third-party content.
Under no circumstances will Sony Ericsson be liable in any way for your improper
use of additional content or other third party content.
OVERVIEW
Introduction
For ease of reference the Getting to know your P910i chapter
gives a quick overview of the main functions of the phone,
shortcuts and general information.
Your P910i combines advanced business and entertainment
features in one intuitive device.
Its camera lets you take pictures and record video wherever you
are and use them in a wide range of applications. The pictures
can be used in the Picture Phonebook, where they can be used to
identify callers.
MMS (Multimedia Messaging Service) allows you to send and
receive messages that include pictures, sound, text and voice
notes.
The P910i features advanced entertainment functionality that
offers high quality MP3 music and widescreen format video
clips and 3D games. New content can be downloaded quickly
and easily from Internet sites or transferred to the phone via
Bluetooth™ Wireless Technology, an infrared port or a cable.
Extra memory is available through a Memory Stick™ , which
also serves as a convenient way to exchange content and
applications such as Java™ games.
The P910i also contains an organizer,
which includes contacts, a calendar,
notes and email, all of which can be
quickly and efficiently synchronized
with a PC. The email application
supports attachments. Viewers let you
read and edit documents in various
formats such as Microsoft® Word and
Excel®.
With Sony Ericsson Update Service
you can keep your phone updated with
the latest P910i software.
The complete P910i documentation
consists of the following parts:
• Quick Guide
• User Guide
• Instruction for removing the flip
• Help texts in the P910i
• Complementary information on the Internet, refer to
www.SonyEricsson.com
The P910i can be used as a corporate phone with Ericsson
MD110 and Business Phone exchanges.
Introduction
Getting to know your P910i
P910i package
A P910i with stylus
B Battery
C Travel charger
D SyncStation
P910i
Stereo headset
Protective bag and strap
G Extra stylus
H Memory Stick
N 2 CDs, Sony Ericsson PC Suite and Multimedia for P910i
Note The design of the charger will differ depending on the
market.
10
Flip replacement tool set
M User documentation package
Memory Stick adapter
K Flip replacement cover
Getting to know your P910i
Note If your package does not include all the listed items above,
please contact your retailer.
Note Before you can use your P910i you need to insert the SIM
card, and insert and charge the battery. Always detach the
charger before you insert or remove the SIM card.
P910i overview
A Stylus
A Indicator light for Bluetooth wireless technology (blue)
B External antenna connector
B Screen
C CommuniCorder
C Flip with keypad and keyboard
D Battery compartment
D Indicator light for network and battery (green/red)
E Connector for accessories and charger
E CommuniCorder activation and shutter release
F Connector for stereo headset
F Internet button for activation of the browser
G Jog Dial
G Slot for Memory Stick
H Infrared port
On/Off button
Getting to know your P910i
11
SIM card.
Battery
When you register as a subscriber with
a network operator, you receive a SIM
(Subscriber Identity Module) card. The
SIM card contains a computer chip that
keeps track of your phone number, the
services included in your subscription
and your phonebook information,
among other things.
Before you use your P910i for the first time, charge the battery
provided for at least 4 hours. Use the supplied charger. See
‘Charging the battery’ on page 13.
A PIN (Personal Identity Number)
code is supplied with the SIM card
from your operator and must be entered
when switching on the P910i.
2. Remove the battery cover by
sliding it downwards.
Open the battery cover by pressing slightly on its upper part and
slide it down the P910i. Insert the SIM card as shown in the
picture.
Some subscriptions are limited to call only predefined numbers,
so-called Fixed Dialing Numbers (FDN). To avoid problems
when traveling abroad, these predefined numbers should be
defined as international numbers starting with +, for example
+4613244500. In order to speed up calling while at home, the
same numbers can also be added in the national number format,
for example 013244500.
For more information. see ‘Copying contacts to and from the
SIM card’ on page 106.
12
Getting to know your P910i
Insertion and removal
To insert the battery
1. Ensure that the flip is closed.
3. Place the battery in the battery
compartment and close the
cover.
To remove the battery
1. Ensure that your P910i is
turned off.
Note It is important that you always turn off your P910i before
removing the battery. Failure to do so can result in loss of
information.
2. Remove the battery cover by sliding it downwards.
3. Use your fingernail at the lower left-hand edge of the battery
to gently lift the lower edge of the battery outwards.
4. Take out the battery.
Charging the battery
• When the battery needs to be charged, a beep is heard. The
indicator light (on the top of your P910i) flashes red and a
battery low message appears on the screen.
• The battery can be charged whenever you want. The P910i
performance is not affected. However, using your P910i
while charging increases the charging time.
To charge the battery
The P910i can be charged either when it is switched on or off.
1. Make sure the battery is inserted in your P910i and the cover
is closed.
2. Connect the charger to
the P910i at the base of
the phone by the flash
symbol. The charger
plug flash symbol must
face upwards.
3. Connect the charger to the mains.
Charging is indicated by the battery icon
on the screen
pulsing continuously, and the indicator at the top of the P910i
showing a steady red light (or green, if the P910i is switched
on).
4. Wait approximately 4 hours or
until the battery meter on the
screen is full and the indicator
on the top of the P910i shows
a steady green light.
5. Remove the charger by tilting
the plug upwards.
Tip You can also use other battery chargers that have been
supplied with other Sony Ericsson mobile phones using the same
connector plug, for example, T300 or P900.
Note When the battery is completely discharged, or new, it may
take up to 30 minutes before the battery icon
appears on the
screen.
Care instructions
Your P910i is a highly sophisticated electronic device. To get
the most out of it, please make sure that you follow this advice:
• Keep the P910i in its protective bag when not using it.
• Use a commercial glass screen cleaner sprayed on a cloth,
when you clean the screen.
• Use only the stylus provided to tap the screen.
See also ‘Battery Use and Care’ on page 183.
Getting to know your P910i
13
First time start-up
Importing phonebook entries
Please read ‘Guidelines for Safe and Efficient Use’ on page 182
before you start using your P910i.
You may want to import existing contact information from
another mobile phone to your P910i. You can do this in several
ways:
When you start your P910i for the first time
1. Press the On/Off button to turn on your P910i, keeping the flip
closed. The language selection dialog opens.
2. Select one of the languages from the list. Read more about
selecting a language in ‘Language selection’ on page 165.
3. Open the flip. Press the On/Off button again. The Setup Wizard
starts and guides you through the essential settings.
4. The Power menu opens. Select Phone on.
5. Enter your PIN when the dialog box appears and press
. Press
to delete a digit.
Turning your P910i on and off
By default the Power menu prompts you to choose normal
operation or Flight mode each time you press the On/Off button.
These settings can be turned off. See ‘To use the Power menu’
on page 49.
In Flight mode the phone and Bluetooth functions are switched
off, but you can still use the other functions. Set your P910i in
Flight mode where the use of mobile phones is not allowed, or if
you want to use the other functions but do not want incoming
calls.
14
Getting to know your P910i
• Beam the phonebook entries from the other phone by
infrared or Bluetooth wireless technology and save the set to
Contacts. See ‘Creating and editing contacts’ on
page 104.
• Synchronize the SIM and the internal memory on the other
phone with one of the PC PIM (Personal Information
Management, for example, Calendar, Contacts) applications
supported by your P910i. Then you can synchronize this
Contacts.
information with
Note When you synchronize
Contacts with your PC PIM
application, the SIM information will not be synchronized. You
might get two versions of the same contact. See
‘Synchronization and backup’ on page 138.
• Phonebook entries stored on your SIM card are accessible
Contacts. Select SIM in the folders menu to the
through
right in the menu bar to see the list of entries in your SIM
Contacts.
phonebook. These entries can be imported to
See ‘Copying contacts to and from the SIM card’ on
page 106.
Flip closed mode
D Shortcut to the Calendar application
E Shows all applications available in flip closed mode
With the keypad flip closed, the P910i can be used as a
conventional mobile phone using the keypad to dial and the Jog
Dial to navigate. For more information please see ‘Jog Dial’ on
page 19 and ‘Keypad functions’ on page 20.
Sony Ericsson
11:20am
Call list
21/06/2004
Applications
CommuniCorder
Music player
Messages
Contacts
Calendar
Tasks
Jotter
Sound recorder
You can open the flip at any time to continue working. Many
more functions are available when the flip is open.
Standby view
The standby view shows shortcuts to the most commonly used
applications. Choose which shortcuts you want to use in
standby. See ‘Personalizing your P910i’ on page 142.
Applications
CommuniCorder
Music player
Messages
Contacts
Calendar
Tasks
Jotter
Sound recorder
Connections
Touch the Jog Dial to see the shortcut icons
A Shortcut to the Messages application
B Shortcut to the Contacts application
C Shortcut to the Call list application
Selecting and starting applications
Rotate the Jog Dial to select an application. Press the Jog Dial
inwards or
to start the application.
Tip When
view is selected, it is also possible to start an
application by pressing its specific number.
Closing applications
The current application automatically closes and the data is
saved when you return to the standby view or switch to another
application. To return to standby, press and hold
or press the
Jog Dial backwards.
Getting to know your P910i
15
Options menu
Press
or press the Jog Dial forwards to open the standby
options menu to get access to keylock, battery status, accepted
callers and more.
CommuniCorder
Pictures
Video
Music player
Internet
Messages
Contacts
Phone
Calendar
Flip open mode
When the flip is opened, the large touch-screen is revealed. You
use the stylus to tap the screen to navigate and enter data. There
is also a handwriting recognition feature, so that you can use the
stylus to write on the screen.
A Shortcut to the Messages application
B Shortcut to the Contacts application
C Shortcut to the Phone application
D Shortcut to the Calendar application
E Shortcut to the Internet application
F Shows all applications available in flip open mode
Applications Edit
All
CommuniCorder
Pictures
Video
Music player
Internet
Messages
Contacts
Phone
Calendar
Tasks
Jotter
Controlpanel
Calculator
PDF
Tasks
Jotter
Control panel
Calculator
Quicksheet
Quickword
Pdf+
Sound recorder
File manager
Storage wizard
Remote Sync
Demo
GPRS data log
Chess
Solitaire
i Online services
Time
16
Getting to know your P910i
The Jog Dial provides further navigation and selection
capability. Closing the flip generally ends an activity and saves
the data. Multimedia phone calls and data sessions will,
however, continue.
When the flip is opened, the large touch-screen is revealed. You
use the stylus to tap the screen to navigate and enter data. There
is also a handwriting recognition feature, so that you can use the
stylus to write on the screen.
The Jog Dial provides further navigation and selection
capability. Closing the flip generally ends an activity and saves
the data. Multimedia phone calls and data sessions will,
however, continue.
A Shortcut to the Messages application
B Shortcut to the Contacts application
You navigate by using the stylus and tapping selected items and
by using the Jog Dial, see ‘Jog Dial’ on page 19.
Flip removed
The flip can also be removed, which makes the organizer
applications easier to access. When the flip is removed, the
P910i works in flip open mode.
Note Turn off the P910i before you remove the flip to avoid to
damage your phone.
To remove and attach the flip, refer to the separate instructions.
Note Please note that Sony Ericsson does not accept any
liability for lost parts or product defects resulting from any
disassembly or modification of the product.
C Shortcut to the Phone application
D Shortcut to the Calendar application
E Shortcut to the Internet application
F Shows all applications available in flip open mode
You can change the shortcuts A-E. See ‘Changing your
application shortcuts’ on page 142.
Navigation
When the flip is open, the application shortcut icons shown in
the flip closed mode move to the top row in the flip open screen.
Virtual flip
You can use a virtual flip when the real flip is removed. Tap the
Enable virtual flip checkbox in
Control Panel > Other > Flip
settings and select the check box to activate it. When the virtual
flip is enabled,
is shown on the status bar when the virtual
flip is open. Select
to ‘close’ the virtual flip.
When the virtual flip is closed, the virtual flip keypad is shown.
Select
to ‘open’ the virtual flip.
Getting to know your P910i
17
Screen areas
B Menu bar
When the flip is closed, you use the keyboard and the Jog Dial.
When the flip is open the screen is touch-sensitive. The screen is
divided into a number of areas: see the figure and table below.
Internet
Chat Edit Edit
11:03
John Smith
+4613244500 (h)
Sony Ericsson
End call
C Application Applications use this central area of the screen to
area
display the essential information.
Many of the applications are based on two standard
view layouts: a list view and a detail view.
D Button bar
An application view displays a button bar that
contains useful controls and shortcuts. Not all
application views require a button bar.
E Status bar
Displays device status information such as: signal
strength, battery and device information, settings for
sounds and time, on-screen keyboard, as well as
temporary indicators such as missed calls and unread
messages.
F Title bar
Displays the name of the active application.
Item
Description
A Application Displays six icons for quick and easy access to the
picker
most common applications. These can be customized.
18
Getting to know your P910i
Usually contains two menus on the left, and a folder
menu on the right. The two left-hand menus contain:
• the application menu, whose name is always the
same as the application. It contains the system
services used by most applications, such as Find,
Send as, and Delete.
• the edit menus contain editing items such as Cut,
Copy, Paste, Zoom, Preferences and Help.
With the flip closed, the menu bar often shows the
function of the
key.
Jog Dial
Action
Function
Rotate the Jog Dial
up
Scrolls items in a list up/to the left, increases
volume during a call, moves back a page when
playing a multimedia message.
Rotate the Jog Dial
down
Scrolls items in a list down/to the right,
decreases volume during a call, moves forward
a page when playing a multimedia message.
Press the Jog Dial
inwards
Selects a highlighted item, dials selected phone
numbers. Generally the same action as
in flip closed.
Press the Jog Dial
backwards
Goes back to the previous screen, dismisses
dialogs, and sends a busy signal to the calling
party when you receive a call. It will not end a
call. Always the same action as
in flip
closed and
in flip open.
Press the Jog Dial
forwards
Flip closed: Brings up the Options menu. Press
and hold takes you to the Applications list.
Flip open: Toggles the Application, Edit and
Category menus. Press and hold takes you to
the Application launcher.
Up
Down
Inwards
Backwards
Forwards
Getting to know your P910i
19
Keypad functions
Key
Key
Function
S TA R
• Enter the character *.
• Press and hold to enter a p (pause) character.
• Press to switch between different input modes
(Abc, 123 ... ). This is useful when writing SMS
or similar texts.
• Press and hold to change between T9 and
multitap.
Function
OK
• Enter selected function, indicated on the display
above the key.
BACK
• Return to previous menu.
• Reject an incoming call.
• Press and hold to return to Standby.
CLEAR
• Delete entered characters/digits from the screen
one by one.
• Press and hold to delete an entire row of entered
characters/digits.
• Delete an entry from Contacts, Calendar, Tasks,
Sound Recorder, and Messages.
• Press and hold to disconnect the microphone
(mute function) when a call is in progress.
• Mute the ring signal during an incoming call.
• Pause/play the melody when the Music player is
open.
• Press and hold to put the P910i into silent mode,
when in the standby view.
OPTIONS
• Open the menu with different options for
different applications.
• Press and hold to open Applications.
20
Getting to know your P910i
HASH
• Enter the character #.
• Press and hold to see a list with special
characters.
• Terminate the input of PIN and security codes.
• Retrieve a phone number from the SIM card
phonebook. Enter the number of the memory
position and then press
NUMERIC KEYS
• Enter the digits 0 to 9.
• Enter associated characters or perform associated
functions. See ‘Shortcuts’ on page 42.
• Press and hold digits 1 to 9 to open Contacts.
Indicators and status bar icons
These icons appear in the flip closed standby screen or in the
status bar when the flip is open. When the flip is open, you can
often tap the icons to get more detailed information or start an
application.
Icon
Icon
Function
Calls screened
SMS notification
MMS notification
Function
Email notification
Signal strength, GPRS available
SMS overflow
Signal strength, GPRS not available
Time
Battery strength
Time, alarm set
Bluetooth on
Keylock
Bluetooth discoverable
Magic word
Bluetooth headset connected
Keyboard
Infrared on
Multimedia volume
GPRS active
Speakerphone
GPRS data transfer in progress
Muted microphone
Ongoing data call
Silent mode
Ongoing call
Home network
Missed call
Voicemail notification
Forward all calls notification
Getting to know your P910i
21
Memory Stick
Memory Sticks provide a convenient way of increasing the
storage space in your P910i. You can use both Memory Stick®
Duo™ and Memory Stick® PRO Duo™. You can save pictures,
video clips, music, and voice recordings as well as computer
data and applications on a Memory Stick and use it to store or
transfer the contents for many different purposes. These include:
Note Insert the Memory Stick correctly to avoid damage to your
P910i or the Memory Stick.
The Memory Stick supplied with the P910i may or may not be a
version that contains the lock function. Remember, you can
overwrite existing files without the lock function.
• Storing backup copies of important files.
To remove the Memory Stick
Press the edge of the Memory Stick using your fingernail or the
stylus to release it. You hear a click as it jumps out of the slot.
• Storing media for personalizing your P910i.
Note Be careful not to drop the Memory Stick when removing it.
• Storing media for use when composing MMS messages.
• Storing installation files for new applications.
Renaming a Memory Stick
• Transferring data between the P910i and a PC or Mac.
You can rename a Memory Stick to give it a name that is
meaningful to you. The name you set will be shown in the
divider between internal and external storage in the folder menu.
See ‘Folders’ on page 28. There are two ways to rename a
Memory Stick:
• Providing storage for third-party applications.
To insert the Memory Stick
1. Open the cover for the Memory
Stick slot.
2. Insert the Memory Stick in the
slot, with the connector side
towards the back (see picture).
Make sure it is securely
inserted. A click should be
heard.
Control Panel > Other > Format disk and tap Rename.
• Select
See ‘Format disk’ on page 165.
• Select
File manager > File > Format disk and tap Rename.
Renaming will not erase any data.
Copying and moving data
For information on how to copy and move data to and from the
Memory Stick, refer to ‘Folders’ on page 28.
22
Getting to know your P910i
Formatting a Memory Stick
New Memory Sticks are normally automatically formatted first
time they are inserted in a phone. The phone stops working
during the formatting and it can take some time.
Note Do not remove a Memory Stick during the formatting.
If you need to reformat a Memory Stick, select
Control Panel
> Other > Format disk and tap Format, or select
File manager >
File > Format disk and tap Format. When you format a Memory
Compatibility
The P910i defines its own folder structure on a Memory Stick.
Each application has its own set of folders. A folder created in
one application is not visible in another.
Other devices must access the same folder structure to interact
with the P910i files. If you are using a PC, this is easily done by
browsing to the required folder on the Memory Stick.
Your P910i uses the shorter Memory Stick variants, Memory
Stick Duo and Memory Stick PRO Duo.
Memory Stick enabled devices which do not allow you to
browse and manage a folder structure may not be able to share
data directly with the applications in your P910i (for example,
Memory Stick enabled digital cameras). However, the File
Manager can access these files and move them into the correct
folders for use by the applications. When your P910i is
connected to your PC, you also have access to the P910i folder
structure as well as other Memory Stick content in My P910i.
Memory Stick adapter
Use the Memory Stick adapter when using your Memory Stick
in a device equipped with a regular sized Memory Stick, for
example a personal computer. Insert your Memory Stick
according to the picture on the adapter.
Personal computer support
Both PCs and Apple computers may be enabled for Memory
Stick use via built-in Memory Stick slots, floppy disk adapters,
PC card adapters, and Memory Stick enabled mice. (Memory
Stick adapter required.)
Warning! Do not insert a Memory Stick adapter without a
Memory Stick into a Memory Stick slot. This may damage the
product. Always insert the adapter in the slot with the connector
end (marked with a triangle) first.
For more information about Sony Memory Stick, visit
www.memorystick.com.
Stick, you delete all the information on it, including any
applications that you may have installed.
Sharing data with other devices
Getting to know your P910i
23
Connecting the accessories
A The travel charger is connected to the desk stand or to the P910i.
Note The design of the charger will differ depending on the
market.
B The USB connector from the desk stand is connected to a PC.
C The headset is connected to the P910i.
D Other accessories can be connected to the connector at the base of
the P910i.
24
Getting to know your P910i
E A car holder can be connected to the antenna connector at the rear.
Note Remove the plastic plug before connecting the P910i to the
car holder.
The wrist strap is threaded through
the holes next to the connector at
the bottom of the P910i.
Services
You need the following services to use the P910i functions:
To use...
You need...
phone services
GSM subscription
text messaging (SMS)
GSM subscription
multimedia messaging (MMS) MMS account, GSM data subscription
email
email account, GSM data subscription
Internet
Internet account, WAP account (only
for WAP 1.x services), GSM data
subscription
data communication
GSM data subscription
You can uninstall the demo application and also reinstall it from
the Multimedia for P910i CD. See ‘Removing applications from
your P910i’ on page 132 for how to uninstall the demo
application and ‘Installing applications on your P910i’ on
page 130 for how to reinstall it.
To start the demo
1. Select the Applications icon
2. Select the Demo icon
and the demo starts.
To stop the demo
Tap the screen or rotate the Jog Dial to stop the demo.
The demo also stops when any other dialog is opened.
Please consult your network operator and Internet service
provider about the services that are available to you.
Note When the flip is open, an incoming text or MMS message
will not stop the demo.
Applications - overview
The Demo application can be launched also when the P910i is
started without a SIM card inserted. When the P910i asks you to
insert the SIM card, just press OK. If the flip is closed, open it.
You can start applications in different ways. Select icons in the
standby view (flip closed) and in the application picker (flip
open) to start the most important ones. Select
to list all
applications.
Phone
This is the mobile phone application. When the flip is opened,
select
to start it.
Demo application (Not in all phone versions)
The Demo application shows some of the most common
functions in your P910i. You can release this application to
remove memory.
Getting to know your P910i
25
Call list
The call list displays the most recent calls, either outgoing,
incoming or missed. In flip closed, press the Jog Dial or
to call the selected entry. To view the call list when the flip is
open, open Phone and tap the call list icon.
CommuniCorder
For taking video clips and still pictures. In CommuniCorder
view, the screen becomes a viewfinder. Press the
CommuniCorder button or the Jog Dial to start recording or take
a photo. Alternatively tap the red button at the bottom of the
screen.
Pictures (flip open only)
Manages your pictures. You can take pictures with
CommuniCorder, or receive them via email, Bluetooth wireless
technology and infrared communication. Download via the
Internet browser, or transfer them from your PC. With the image
editor you can also edit your pictures.
player supports the most common sound formats. You can save
music tracks on the Memory Stick.
Internet (flip open only)
The Internet browser can access both Web and WAP pages. It
can also download images, video clips, audio files, and Java
applications.
Messages
You can read, create, send and delete text (SMS), multimedia
(MMS) and email messages in this view.
Contacts
Displays a list of your contacts. Select a contact to view
associated contact data.
Calendar
The Calendar view displays entries for the current day. Use the
Jog Dial to get more information about a selected entry or to
change days.
Video (flip open only)
Plays video clips. You can record video with CommuniCorder,
download them from Internet or transfer them from your PC.
You can stream video and audio from the Internet.
Tasks
Keeps track of your tasks. Set due date, alarm, priority, and so
on, for all your tasks and let your P910i remind you in time.
Music player
Plays music tracks and other audio files. You can download
these from the Internet or transfer them from your PC. The
Quicksheet,
Quickword,
Pdf+
(flip open only)
Use it to view and edit various types of documents. Pdfdocuments can not be edited.
PDF
26
Getting to know your P910i
Jotter
Displays a list of stored entries. In detailed view, the complete
entry is displayed.
Control panel (flip open only)
Contains all settings that are system-wide and affect more than
one application. This is the main view to use when initially
setting up your P910i.
Note Settings for Flight mode and P910i locks are located
under Control panel > Device
Calculator (flip open only)
A standard 10-digit calculator. You can add, subtract, multiply,
divide, calculate square roots and percentages.
Sound recorder
You can use your P910i as a sound recorder.
Time (flip open only)
Shows time and date. You can set your current location and
another. You can also set different alarms.
File manager (flip open only)
You can handle the content and organization of media, both in
the P910i and on the Memory Stick.
Storage Wizard (flip open only)
Helps you to release memory. The icon
appears in the status
bar when the memory is running short. Tap it to start the Storage
Wizard.
Remote Sync (flip open only)
Performs synchronization over the air. Using GPRS, the P910i
can be continuously connected to the remote synchronization
server. Remote Sync works equally well over CSD or HSCSD.
Online services
Your service provider may offer different services, for example,
weather forecasts, financial information or newsletters. Contact
your service provider for more information.
GPRS data log (flip open only)
A list of GPRS Internet accounts. Open an account to view your
logged GPRS traffic, including your costs. The P910i creates a
new data log when a connection to an account is created.
Connections (flip closed only)
Set the way you communicate with your PC or other devices.
Select between infrared, Bluetooth wireless technology and
cable. In the cable menu, you can also select whether the P910i
synchronizes with a PC or acts as a wireless modem.
Getting to know your P910i
27
Updating the software
With Sony Ericsson Update Service you can keep your phone
updated with the latest P910i software. See “Sony Ericsson
Update Service” on page 132 how to download the software
from the Internet.
General functions
Application launcher views
In flip open, the P910i can present the applications in two ways:
• List view (small icons appear in one column)
• Icon view (large icons appear in two columns)
Folders
a handheld device. If you make it a habit to set up specific
folders to suit your needs and use them to categorize all your
information, working with it becomes easy.
Each application has its own set of folders. A folder created in
one application is not visible in another.
For each application there is a default Unfiled folder. Since there
is no way of seeing on your P910i, whether a file in an Unfiled
folder is located on your P910i or on a Memory Stick, we
recommend that you move files to your own folders as soon as
possible.
Every item created in an application is always assigned to a
single folder, by default the folder as displayed in the list view.
In list view, the folder menu is used to organize your entries. In
detail view, the folder menu allows you to change the folder of
the current item.
Folders are used to organize information, for example contacts,
jotter entries, or task lists. You might want to organize your
contacts in business and personal folders.
Using the folder menu
In the applications that use folders you can see the folder menu
to the right in the menu bar.
Folders are also used when managing files of different types on
your P910i and Memory Stick. You might want to move or copy
sound files into a sound track folder to store on a Memory Stick.
When a Memory Stick is available in the P910i, the folders on it
are shown in the folder menu under the divider. If you rename
the disk (see ‘Renaming a Memory Stick’ on page 22) the
divider will show the new name.
As you may notice, if you connect your P910i to a PC and view
the contents of your P910i in My P910i, it is easier to get an
overview of a folder and file structure on a large screen than on
In list view, there is a super-folder called All, which, when
Contacts, the All
selected, displays items from all folders (in
28
Getting to know your P910i
folder does not display the entries in the SIM phonebook). All is
the default value in list views and when an application is first
launched.
Use the Edit Folders menu item to:
To copy a file to another folder
1. Open the file in detail view. In the folder menu, select the
destination folder. Select Copy to in the main application
menu; for example Music or Pictures.
2. Select the destination Folder from the list and tap Copy.
• Rename a folder, or move a folder to or from the Memory
Stick. Select the folder you want to move or rename, tap Edit,
type the name of the new folder, and choose a Location from
the list. Tap Done.
Tip To delete multiple files in an application you can use
Storage manager. See ‘Deleting or copying general files’ on
page 167.
• To add a new folder. Tap Add, enter a folder Name and choose
a Location from the list. Tap Done.
Managing your files
• To delete a folder. Select the folder you want to delete and tap
Delete. A folder can only be deleted if it is empty. Not all
folders can be deleted.
Using the File Manager, you can handle the content and
organization of media, both in the P910i and on the Memory
Stick. See ‘File manager’ on page 125.
To copy all the files in a folder to another folder
You can also use the Storage manager in the Control Panel. See
‘Storage manager’ on page 167.
1. From within an application such as Pictures or Video, select a
folder from the folder menu. From the application menu, first
select Select all and then Copy.
Zooming
2. Select the destination Folder from the list and select Copy.
You can change the size of the screen fonts. Choose between
Small, Medium or Large. From the menu bar, tap Edit > Zoom.
To move a file from one folder to another
Open the file in detail view. In the folder menu, select the
destination folder.
Automatic saving
When you work in an application and leave it, your work is
automatically saved.
Getting to know your P910i
29
Find
To send an item using Send as
The Find function searches through all the items stored in an
application. The standard Find dialog contains a single text edit
box with two buttons, Find and Cancel. Selecting Find starts the
search, while Cancel closes the Find dialog.
1. Enter the Send as menu in the specific application.
In some applications, for example Messages, Find may be more
advanced:
• The size of each message is so large that you may want to
restrict the search to the current message only.
• Folders are potentially more significant, so you may want to
restrict the search to the current folder only.
Sorting your files
You can sort the files you have stored in your P910i. By sorting
your files, you choose in which order you want the files to be
displayed on the screen. You can choose between sorting by, for
example type, size, date, or name.
Note Sort is not included in all applications.
Sending and receiving items
From many applications it is possible to exchange items like
appointments, contacts and images.
30
Getting to know your P910i
2. Depending on the application and item, you can choose
between the following transfer methods:
• Text message (using SMS): P910i will create a new text
message. Add the mobile number of the recipient and tap
Send.
• Email: the P910i will create a new message with the item
included as an attachment. Complete with address and
subject, and tap Send.
• Multimedia message (using MMS): the P910i will create a new
message with the item included as an attachment. Complete
the message and tap Send.
• Infrared: align the infrared port of the P910i with the infrared
port of the other device. Select Send. Messages on screen will
tell you when the information has been transferred.
• Bluetooth wireless technology: the P910i will search the local
area for Bluetooth devices that are set to be visible. These
will be presented in a list. Select a device to which the item is
to be sent and select Send. Progress messages will tell you
when the information has been transferred.
Tip The other devices must have Bluetooth wireless technology
enabled. You can select Refresh to perform a new search if, for
example, a destination device was not enabled at first.
To handle items received in email and multimedia messages
Methods for storing data
1. Tap the notification icon
, or
open Messages and select MMS or an email inbox.
Your P910i can store data in different ways:
2. Open the message.
3. Select the attachments tab.
4. Select the required attachment. The attachment or a summary
of the attachment will be displayed.
5. Select Save to save the item. You may optionally display the
received item within the related application.
See ‘Messages’ on page 87 for more information.
To receive beamed items
1. Ensure that infrared or Bluetooth wireless technology is
activated and, for infrared, that the infrared ports are aligned.
2. The received item will be notified by a dialog box listing the
item(s) received. When using Bluetooth you will also be
asked to accept or reject the connection.
3. Select View to view and save the item to the related
application. Select Done and any unsaved items will be
automatically saved for you in the Beamed inbox in
Messages.
• Internal memory. Used for storing pictures, messages, music,
applications, and so on.
• Memory Stick (expansion memory).
• SIM card, for phone numbers and associated names. See
‘Copying contacts to and from the SIM card’ on page 106.
• Several other expansion-memory alternatives on the market.
• Pictures on Sony Image Station on the Web:
– For Europe: http://www.sonystyle-imaging.com
– For Japan: http://www.imagestation.jp
– For USA: http://www.imagestation.com
Getting help and setting zoom
From the menu bar tap Edit > Help to get to the P910i help system
or set the zoom level. The help system uses two views:
• The Topics view shows all available topics, for example both
specific application topics and general topics.
• The Detail view presents the title and text of a single topic.
The Topics view allows you to select a topic, which opens the
detail view and displays the selected topic.
In many dialog boxes you can select the Help icon
upper right corner.
in the
Getting to know your P910i
31
Settings
• abc – lowercase entry
For settings that are application-specific, tap Edit > Preferences in
the application menu bar. For generic settings, use Control panel.
When you are editing text you can:
Entering text with the flip
closed
• Press
mode.
With the flip closed, you use the keypad keys to enter text, for
example, when writing a text message. When you press a key, a
pre-edit box with the different characters on that key is shown in
the title area:
Inserting symbols
If the same key is pressed again, the next character in the preedit box will be selected.
The
key deletes the character to the left of the cursor. If
continuously pressed, the
key deletes several characters
and then whole words.
Types of text input
There are four text input types:
• Abc – initial uppercase letter, the rest lowercase. Default for
each new text edit field.
• Press
and select Text options > Input type to select text
input type.
to switch between the input types in text edit
When you are editing text you can press
and, depending
on the application, choose Add symbol or Text options > Add symbol
to select an item from the symbol selector table. Use the Jog
Dial to select the row and press
. Then scroll within the
row to select a symbol and press
T9® text input
You can use T9™ Text Input when writing, for example text
messages and email. The T9 Text Input method uses a built-in
dictionary to recognize the most commonly used word for each
sequence of key presses. This way, you press each key only
once, even when the letter you want is not the first letter on the
key. Press and hold
to change input method.
The following example shows how to start writing a text.
• 123 – numeric entry only
• ABC – uppercase entry
To enter letters using T9 Text Input
1. Select, for example, Messages > Create SMS.
32
Getting to know your P910i
2. For example, if you want to write the word ‘Jane’, press
During text entry, a suggestion list with word candidates are
presented. The most frequently used word is highlighted.
3. If the word is the word you want:
– Press
or
to accept and add a space.
• My words, to view the user dictionary.
• Language, to change language.
• Show suggestion list / Hide suggestion list, to switch the
candidates window on and off.
• Use T9 / Use multitap, to switch between T9 Text Input and
multitap text input
If the word is not the one you want:
• Add symbol, adds symbols and punctuation marks.
– Scroll with the Jog Dial up or down to view alternative
words (candidates). Press
to accept the word and
add a space.
• Input type, changes the text input type between Abc, abc, ABC
and 123.
If you do not find the word you want:
– Press
to go to a list of options.
– Select Text options > Spell word.
– Edit the word using multitap text input and press Yes.The
word is added to the user dictionary. The next time you
enter the word, it will appear as one of the alternative
words.
4. Continue writing your message.
• Copy all / Paste, to copy all text to the clipboard, and for
pasting the copied text to the place of the text cursor.
Entering text with the flip open
There are three ways of entering text with the flip open:
• Use the on-screen keyboard
screen.
located at the bottom of the
• Write directly on the screen using the stylus.
• Use the keyboard on the inside of the flip.
Press
to enter a full stop. To enter other punctuation
marks, press
and use the Jog Dial.
If you press
a list of options:
and select Text options when writing, you get
• Spell word, to edit the entered word.
Getting to know your P910i
33
On-screen
keyboard
When you need to edit text,
tap the keyboard icon in the
status bar and then select
characters. Tap Done when
ready.
Handwriting recognition
Calendar
Chat Edit Edit
Unfiled
Weekly meeting
Type
Appointment
Description
> Setup to change
Tap
language for the keyboard.
At the bottom left of the
keyboard you can choose
between three keyboard
layouts with different
character sets.
Done
The agenda
for...
Weekly
meeting
1 2 3 4 5 6 7 8 9 0
q w e r t y u i o p
cap a s d
f g h j k l
z x c v b n m .
abc aeo 123
, ? @
abc - standard characters
àëó -
international characters
123 -
numeric characters and currencies
The current input field is shown to the left in the top bar of the
keyboard. Tap the arrows or rotate the Jog Dial to change the
input field. The keyboard top bar also contains a drop-down
menu with Cut, Copy and Paste. When copying or cutting, the text
must be selected first.
34
Getting to know your P910i
Handwriting recognition
translates stylus gestures
into letters, numbers or
other characters, and
displays these characters
as text. Handwriting
recognition is only active
in places where text can
be input.
The text mode screen is
split into an upper and a
lower part, by an arrow
in the middle of the right
edge. Write lowercase
letters below the arrow
and uppercase letters in
line with it. Write
numbers above the arrow.
Contacts
Chat Edit Edit
First name Jane
Unfiled
Last name Jones
Job title Graphic Desig
Phone (w)
Phone (h)
Mobile (w)
Ring tone
Default Rin...
Email (w)
Fax (w)
Web
Mark text by putting the stylus on the text, wait a moment, and
drag the stylus over the text.
Note Most letters can be written using different stroke styles.
See the tables below. The style does not determine case. The
position on the screen decides case.
Letters
Lowercase letters are written below the arrow and uppercase
letters in line with the arrow.
t 2
x 1
Accented letters
Write the character as described above, then write the accent
above the arrow. Other such characters, for example, ö and ü,
follow the same principle.
Note Start each stroke at the dotted end.
Note Start each stroke at the dotted end.
Numbers
Numbers are written above the arrow.
or
Note Start each stroke at the dotted end.
Getting to know your P910i
35
Extended characters
To write symbols and characters that are not shown in these
tables, please consult the Extended characters section of the
Handwriting recognition help topic in your phone.
Press the space key to enter a character space to the right of the
cursor. Press and hold the space key to move the cursor forward
by inserting 6 space characters at a time.
Note When typing, press the keys one after another. Not, for
example,
and E simultaneously.
CAPS
Flip keyboard
Located on the inside of the flip,
the keyboard is similar in design
to that of a standard computer
keyboard.
With the flip open you use the
keyboard keys to enter text, for
example, when writing a text
message. When you press a key,
if there are additional characters
associated with that key, then these will be shown in a pre-edit
box in the title area: e 'e ee é è e ê
If the same key is pressed again, the next character in the preedit box will be selected. You can also use the Jog Dial to run
through and select characters in the pre-edit box. (The pre-edit
box will be displayed on screen for as long as you have the key
depressed.) When the key is released, the highlighted character
will be selected after approximately 1 second.
Press
to delete the character or spaces to the left of the
cursor. Press and hold
to delete several characters and then
whole words.
36
Getting to know your P910i
Using the CAPS key
The
key is used to capitalize or 'caps-lock' characters on
the keyboard.
CAPS
• Press
once followed by, for example, 'E' to write a
capital letter. Any additional keys pressed will be displayed
in lowercase.
CAPS
• Press
twice for caps-lock. Any additional keys pressed
will be displayed in uppercase until
is pressed again to
remove caps-lock.
CAPS
CAPS
Using the 123 key
The
key is used to access the colored characters and
numbers on the keyboard keys.
• Press
once followed by, for example, E to type the
number 3. Any additional keys pressed will display the
standard characters on the keys.
• Press
twice to lock the colored characters and numbers.
Any additional keys pressed will type the colored characters
or numbers until
is pressed again.
Inserting symbols
There are a number of ways to insert symbols with the P910i
keyboard.
• Press the
or
keys to show additional symbols in the
pre-edit box in the title area.
• Use the
to access the colored symbols on the keys.
• Holding down the
key for a short time will generate the
symbol selector table. To select a symbol use the Jog Dial by
first scrolling through the rows, and select the row by
pressing the Jog Dial inwards. Then use the Jog Dial to scroll
within the row, and selecting the symbol by pressing the Jog
Dial inwards.
See “Flip settings” on page 165 how to specify which keyboard
your P910i has.
SIM card lock
The SIM card lock protects your SIM card, not the P910i,
against unauthorized use. It is unlocked by the PIN and PUK
codes which you receive from your service provider.
You can choose to have to unlock the SIM card every time you
turn the P910i on, or to have the SIM card unlocked.
Your PIN (Personal Identification Number) code consists of four
to eight digits. If you activate the SIM card lock, the P910i will
ask for the PIN code every time you turn it on. You unlock the
SIM card by entering the PIN code.
To activate the SIM card lock
1. Select
Control panel > Device > Locks.
2. Select a lock option.
3. Select Done.
P910i locks
Use the SIM card lock and the device lock to protect your SIM
card and your P910i from unauthorized use. Use the keylock to
prevent the keys from being accidentally pressed.
Note You can usually make an emergency call without
unlocking the P910i.
An error message informs you if a wrong PIN code has been
entered. Usually, the SIM card will be blocked after three wrong
attempts (the number of attempts is SIM-card dependent), and
you need to enter the PUK code to unblock it.
The PUK code consists of eight digits. When you have entered
the right PUK code you must enter a new PIN code. You have
ten attempts to enter the PUK code. If all ten attempts fail, the
Getting to know your P910i
37
SIM card will be disabled and you need to contact your network
operator.
You cannot change the PUK code.
PIN2
Some functions on the SIM card can be protected by a
secondary code feature. Some SIM cards do not have a PIN2
lock.
The PIN2 lock cannot be deactivated. The code can be changed
by a user who knows the old code.
Device lock
The device lock protects your P910i and the data in it against
unauthorized use.
If the device lock is set to When SIM changed, it means that the
P910i is not normally locked. However, if the SIM has been
changed, the P910i asks you to enter the code to unlock the
P910i before you can use it. This means that if someone steals
your P910i and puts another SIM card into it, they will not be
able to use it.
Note Your operator can block your SIM, if you report that your
phone has been stolen.
The device lock is not on when you buy your P910i. You can
change the device lock code to any four to eight digit personal
code.
38
Getting to know your P910i
The default device lock code is 0000.
To activate the device lock
1. Select
Control panel > Device > Locks.
2. Select a lock option.
3. Select Done.
You can choose to have the P910i locked every time you turn it
on, locked when the SIM card has been changed, or unlocked.
It is also possible to use the device lock in combination with the
Control panel > Device >
screen saver. Just mark the checkbox
Display > Screen > Screen saver device lock to have the device lock
activated when the screen saver goes on.
Note When using the screen saving device lock, make sure you
have set the device lock to activate at Power on. Otherwise your
P910i will be unprotected after Power on, until the screen saver
goes on.
Note You will not be able to browse the contents of your P910i
from a PC, or synchronize items using the SyncStation, when the
P910i device lock is enabled and active.
Change code
with the flip removed. When this setting is active, the screen
will automatically become locked after a period of inactivity.
To change a code
1. Select
Control panel > Device > Locks.
2. Select Change Codes.
3. Select the code you want to change.
4. First enter the old code, then the new one. (To ensure that
you have typed the new code correctly you have to enter it
twice.)
Automatic keylock
To activate or change the screen lock
1. Select
> Settings > Screen > Automatic input lock.
2. Select a lock time or Off.
To lock the screen
> Lock screen.
Select
To unlock the screen
Push the Jog Dial Forwards > Inwards or Backwards > Inwards.
This option locks the keys on your P910i when the flip is closed.
This is to protect the device if the keys are accidentally pressed.
When this setting is active, the keypad will become
automatically locked after a period of inactivity.
To activate or change the keylock
Control panel > Device > Locks.
Select
To unlock the keys
Select
Screen lock
This option locks the screen of your P910i. This is to protect the
device if the screen is accidentally pressed in flip open mode or
Getting to know your P910i
39
Phone
The Phone application is easy for the beginner, yet powerful for
the advanced user. It can be used together with the other
functions of the P910i, including applications from developers
outside Sony Ericsson.
• Flight mode which enables the P910i to be used as a PDA in
situations where radio transmitters may not be used. The
GSM and Bluetooth transmitters (and receivers) are switched
off.
The phone includes useful features such as:
With the flip closed you can access most of the functions using
the Jog Dial and the keypad. More advanced tasks such as
handling a conference calls or using other applications during a
call are best handled with the flip open.
• Personalized ring types.
• Picture phonebook.
• Quick access back to the entries in Contacts, making it easy
to try an alternative number or send a message if the contact
is unavailable or busy.
Some options may be hidden or not available depending on your
subscription.
• Voice-dialing – make a call by saying the contact’s name.
• Voice answer – an incoming call may be answered or sent a
busy signal, using the words recorded for ‘answer’ and
‘busy’.
Call handling with the flip
closed
• Incoming call acceptance limit – specify those who should be
able to reach you.
With the flip closed, you can use either the keypad or the Jog
Dial to handle calls.
• Access to other applications while talking on the phone.
• Office handsfree (speakerphone) which starts when you open
the flip, making it easy to access applications such as
Calendar and Jotter while talking.
40
Phone
Outgoing calls
To make a call
Enter the phone number on the keypad and press the Jog Dial or
press
• Press
to delete a typed character. Press and hold
delete all characters.
• Press and hold
to
to insert the international call prefix +.
To make a call using Contacts
1. Select
on the standby screen.
2. Press the Jog Dial or
• Press
and select Hide my number when you have
entered the phone number, if you do not want to show your
phone number to the party you are calling. Select Show my
number, if you want to show it.
3. Scroll the list by rotating the Jog Dial and select a contact.
If the called party is busy, a dialog box appears from which you
can set your P910i to automatically retry to connect.
For more information, see ‘Contacts’ on page 101.
To make a call using Speed dial
Speed dial is a fast way to call one of your special numbers. See
‘Set up speed dial numbers’ on page 48.
1. There are various ways to make a call using voice control.
– Press and hold the Jog Dial.
– Press and hold
– Say the ‘Magic word’.
– Press the call button on the headset.
1. Press the key corresponding to the number of the speed dial
contact.
The speed dial name is shown above the
key. If a
picture is attached to the speed dial, the picture is also shown.
2. Press
To make a call using the Call list
1. Select
on the standby screen.
2. Press the Jog Dial or
3. Scroll the list by rotating the Jog Dial and select an entry.
4. Press the Jog Dial or
4. Scroll by rotating the Jog Dial and select the desired number.
5. Press the Jog Dial or
To make a call using voice control
When the Magic word function is active, the
appears in the status bar.
icon
2. When you hear a short tone, say the voice command linked to
the number you want to call. The P910i will connect you
with the matching contact.
You can use voice control when the P910i is handheld, used
with a handsfree set (car or portable), or with a Bluetooth
Phone
41
• Press and hold any of the keys from
to
to open
your Contact list. Press again to reach the next letter.
Additional key presses will add letters to your search.
wireless technology headset. Magic word cannot be used
together with a Bluetooth wireless technology headset.
Read more about this in ‘Voice control’ on page 53.
To make an emergency call
Enter the emergency number on the keypad and press
the Jog Dial.
• Press any digit followed by
in the SIM phonebook.
or
Usually, but not always, no SIM card or PIN code is required for
emergency calls and you will be able to make the call as long as
you have coverage from a GSM network. Check with your local
provider to find out if emergency calls are possible without a
SIM card, and which emergency call numbers are supported.
To end a call
Press
, or press the Jog Dial.
Shortcuts
• Press and hold
to dial your voicemail. With the flip
open, select Phone > Call voicemail.
See ‘Voicemail’ on page 56 on how to set up voicemail.
• Press any of the keys from
to
to call a speed dial number.
• Press
followed by
twice to call the last dialed number.
• Press
to reach a phone number
for the last dialed number.
Incoming calls
When you receive a call, the name of the caller will be displayed
if the calling party is in Contacts and the caller’s number is
received from the network. If there is an associated picture it
will also be shown in a small or large version. See ‘Incoming
call picture’ on page 53.
You can select whether an ongoing program will remain active
when you get an incoming call or if the Phone program shall
interrupt it. For settings see “Incoming call behavior” on page
57.
To handle an incoming call
You can press
to answer the call or answer by voice
control, see ‘Voice control’ on page 53.
You can press
ring signal.
to reject a call and press
to silence the
An incoming call will bring up the following options:
• 1 Answer – Answer the call.
42
Phone
• 2 Send Busy – Reject the call. The calling party will hear a
busy tone and the call will be logged as a rejected call.
• Transfer sound – Transfer the call to a Bluetooth wireless
technology headset.
• 3 Mute – Silence the ring signal. The calling party will not
notice that you have silenced the call. The call will be logged
as a missed call.
• Turn On/Off tones – You can send DTMF tones with the
keypad, ‘Controlling tone-based services’ on page 49.
• Microphone mute On/Off – Turn the microphone on or off.
If a large picture of the caller fills the screen, you can press
or use the Jog Dial to access the menu with the options
above.
• Paste number – Paste a copied number to be used for the next
call.
Options during or directly after a call
• Speakerphone On/Off – You can use the P910i as a
speakerphone. See ‘Speakerphone’ on page 48.
Use the Jog Dial to change the phone volume during a call.
Press
to get a list of call handling options. The list will
vary depending on the situation. Options that concern two or
more active calls are described in ‘Handling two or more calls’
on page 45.
• End call – End the active call.
• New call/Hold call/Retrieve call – Put the active call on hold /
retrieve the held call. This is useful if you want to make a
new call during a call.
• Add to contacts – Create a new Contacts entry if the phone
number of the active call is known, and not already stored in
Contacts.
• Show contact – Display the entry in Contacts, if any, that
corresponds to the phone number of the active call.
• Copy number – Copy a phone number to the clipboard.
• Applications – Open another application, and, for example,
paste a copied phone number into a Jotter entry.
Press and hold
Shortly press
to mute the microphone during a call.
again to reactivate the microphone.
Call handling with the flip open
You use the stylus and the virtual keypad to handle calls with the
flip open.
Outgoing calls
To make a call
1. Select
opened.
in the application picker. The Speed dial view is
Phone
43
2. Tap
on the button bar.
To make a call using the Call list
3. Enter the numbers with the virtual keypad and tap
keypad, or press the Jog Dial inwards.
on the
To delete a typed character - tap
. If you do not want to
show your phone number to the party you are calling, select
Phone > Hide my number after you have entered the digits.
Select Show my number, if you want to show it.
If a call is not successfully connected, the P910i can be set to
automatically retry to connect the call. When a retry is
successful, the P910i alerts you with a single ring signal.
To make a call using Speed
dial
Speed dial is a fast way to call
one of your special numbers.
See ‘Set up speed dial
numbers’ on page 48. This is
the default phone view.
1. Select
bar.
Phone
3. Select
To make a call using the Contact list
1. Select
in the application picker.
2. Select an entry by rotating the Jog Dial and pressing it
inwards.
4. Press the Jog Dial inwards.
Phone
Edit
Chat Edit
Sony Ericsson
You can also tap the contact and/or number using the stylus.
John
Sandra
Mike
Julia(h)
Robert
Empty
Empty
Susan(w)
To make a call using voice control
You use the voice control in the same way as with the flip
closed. See“To make a call using voice control” on page 41.
To end a call
Select End call, or press the Jog Dial.
Incoming calls
Elizabeth
44
from the button bar.
2. Select an entry by rotating the Jog Dial and pressing it
inwards. You can also tap the entry using the stylus.
3. Select a phone number by rotating the Jog Dial.
on the button
2. Use the Jog Dial or tap with
the stylus to select an entry.
1. Select
When you receive a call, if the calling party is found in
Contacts, the name of the caller will be displayed. If there is a
picture, it will also be shown in a small or large version. See
‘Incoming call picture’ on page 53.
To handle an incoming call
Use the screen buttons to select what to do.
• Answer – Answer the call.
• Send Busy – Reject the call. The calling party will hear a busy
tone and the call will be logged as a rejected call.
• Mute – Silence the ring signal. The calling party will not
notice that you have silenced the call. The call will be logged
as a missed call.
• Add to contacts – Create a new Contacts entry. This option
appears automatically after a call if the phone number of the
call is known, and not already stored in Contacts. See ‘Add to
contacts’ on page 54.
• Show contact – Display the entry in Contacts, if any, that
corresponds to the phone number of the active call.
• Copy number – Copy a phone number to the clipboard.
• Paste number – Paste a copied number into a field
Tap
to make the following adjustments:
• Call volume – Adjust the volume in the phone. This is easier to
do with the Jog Dial.
You can also answer by voice control, see ‘Voice control’ on
page 53.
• Vibrating alert – Set when the vibrating alert should be active.
Options during or after a call
• Silent mode – All sounds, for example ring signals, will be
turned off.
There are several options available, depending on the situation.
You can access some of them using the screen buttons, by
tapping the field with the calling party details, or on the menus.
• Speakerphone – Activate the P910i as a speakerphone.
Options that concern two or more active calls are described in
‘Handling two or more calls’ on page 45.
Handling two or more calls
• End call – End the active call.
During a call, you can make a second call, or answer an
incoming call. The ongoing call is put on hold and the new call
becomes active. The held call is shown with a grey background.
• New call/Hold call/Retrieve call – Put the active call on hold/
retrieve the held call.
• Mute microphone – Turn the microphone on or off.
If someone calls when a call is on hold, you will be asked if you
want to release the held call and answer the incoming call.
Phone
45
When an active call is finished, you are asked to retrieve the
held call. If you do not respond within a few seconds, the held
call will also be finished.
With the flip open, choose options by tapping the screen
buttons, by tapping the field with the other party’s details, or
selecting from the menus.
To make and handle a new call during a call
Press
to get a list of call
handling options with the flip
Phone
Edit
Chat Edit
closed.
Conference calls
11:03
John Smith
– End active call – End the
0123456789012(h)
active call, the held call
becomes active.
– Switch calls – Switch
Anne Jones (w)
between the active and
held call.
End active call
– Start conference call / Add to
Switch calls
conference call – Join the
Start conference call
two calls for a conference
call.
– Transfer calls – Connect
the held call to the active
call and disconnect yourself from the call.
– Release all – End both calls.
– Show contact – Display the entry in Contacts, if any, that
corresponds to the phone number of the active call.
46
Phone
A conference call can be started
when you have an active call
and a held call.
The conference call view is
automatically displayed
whenever a party has been
added to the conference.
If an incoming call is answered
during a conference call, the
conference call will be put on
hold.
Phone
Chat EditEdit
11:03
John Smith (w)
Tom Clark (w)
Ann Jones (h)
End conference
New call
Hide parties
Note Conference calls are only
available if they are supported
by your subscription.
To start a conference call
With one active call and one held call, tap the Start conference call
button, or select Phone > Start conference call from the menu.
To add a new conference party
To view the Call list with the flip closed:
1. During a conference call, tap New call and make a new call.
1. Press
2. Select Add to conference.
2. Select Call list.
To manage a conference call
Use the screen buttons:
or
• End conference – End the conference for all parties.
2. Press
and select which calls in the list you want to
display. The currently selected view is not shown as an
option.
• Show / Hide parties – Switch between the standard call control
view and conference call view.
To speak privately to a specific conference party
Tap a party in the list to get the following options:
1. Select
on the standby screen to open the Call list.
Tip With the flip closed you can press
once to view the
call list. Press twice to call the last number used in the P910i.
• Extract party – Make the selected party the active call, the rest
of the parties will be put on hold.
To view the Call log with the flip open:
• Release party – End the conference call for the selected party.
2. Select a listed call to see more detailed information about it.
1. In the Phone application, select
from the button bar.
To delete calls from the Call list
Call list and call log
• To delete all calls, select Phone > Delete all calls.
The Call list available with the flip closed shows calls made,
received, rejected, or missed. with the last dialed call at top.
• To delete old calls, select Phone > Delete entries older than >
Enter a date > Delete
The Call log available with the flip opened keeps track of date,
time, length, and cost information (if available) for each call. It
shows all calls in order with the most recent call at the top.
• To delete one call, open the detailed view on the call > Phone
> Delete this entry.
Phone
47
Hints and smart functions
Speakerphone
If you open the flip during a call, the speakerphone function is
activated and the volume will increase. This lets you continue
the conversation while using other functions of the P910i.
Close the flip or tap
to switch off the speakerphone.
Note The speakerphone does not work while the phone is in
silent mode.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear. Exposure
to excessive volume may damage hearing.
Set up speed dial numbers
Speed dial is a fast way to call one of nine selected phone
numbers. The view contains nine speed dial positions. Each
speed dial entry consists of a picture or an icon, and a name or a
number. The names, numbers and pictures shown in the Speed
dial view are derived from the Contacts application, see
‘Contacts’ on page 101. If the contact has a picture stored then
this picture is used. A default icon is used if the contact does not
have a stored picture.
To set a Speed dial number
1. Select
from the button bar.
2. Select an empty position.
3. Select the desired contact.
4. Edit the name tag if desired.
Silent mode
In silent mode all audible ring and alarm signals are turned off.
When the flip is closed, press
and select Turn on silent to
put the phone in silent mode. Press
and select Turn off
silent to turn off silent mode. When the flip is open, tap the
sounds icon in the status bar to open a dialog where you can
switch silent mode on or off.
The vibrating alert still works in silent mode if not deactivated.
5. Select Done.
To edit or delete a Speed dial number
1. Select
on the button bar.
2. Select Edit > Edit speed dial.
3. Select the contact to edit or delete.
4. To change the name, enter the new name.
To delete a contact, tap Delete.
5. Select Done.
48
Phone
Flight mode
Note The phone and other communication functions must never
be used in an aircraft unless otherwise instructed by the aircraft
personnel. If the use of equipment without a radio transmitter is
permitted, you can turn on the flight mode on the product. Doing
so turns off the radio function.
In flight mode the radio function is turned off so that it does not
disturb sensitive equipment, for instance in an airplane or in a
hospital. You cannot make and receive calls, but most of the
other functions in the P910i are available.
A Power menu asks you if you want to start the P910i in normal
mode or flight mode each time you turn on the P910i. See
‘Flight mode’ on page 147 on how to activate and deactivate
this Power menu.
2. On the Power menu, select the option you want.
3. Press the Jog Dial,
, or tap Done.
To set flight mode on or off
1. Select Control panel > Device > Flight mode.
2. Select Flight mode now / Phone on now.
3. Tap Done.
Controlling tone-based services
You can use your P910i to control phone banking services or
other tone-based services that use DTMF (Dual Tone Multi
Frequency).
The P910i provides different ways of sending tones during a
call:
Note You must set the Power menu before the flight.
• Pressing keypad keys during an active call.
To use the Power menu
The Power menu has the following options:
• Including a tone sequence in the call setup. Enter the phone
number, then press and hold
to insert a pause,
represented by the character p. Continue to enter your
numbers for the tone-based code. Finally make the call by
pressing
• Phone on – Start the P910i in the normal way.
• Flight mode – Start the P910i in flight mode.
• Power off – Turn the P910i off.
Hyperlinks in Messaging and Jotter
To set flight mode on and off when Power menu is selected
1. Press the On/Off button.
When you write text in Messaging and Jotter, your P910i
interprets a number as a phone number. If you select that
Phone
49
number, you have the possibility to, for example, call the
number or send an SMS to it.
Your P910i also recognizes email addresses and URLs. If you
select an email address you have almost the same possibilities as
for the phone number. If you select an URL, your have the
possibility to start the Internet browser which opens the
corresponding Internet page.
• Write digit sequences into
a Contact entry for the
service. Each digit
sequence to be sent as
tones must begin with p. A
space will end the tone
sequence and you can add
a comment after the space.
Once your call to the
service has been
established and you want
to send one of your preprogrammed digit
sequences, choose Show
contact on the Phone menu
to get back to the Contact
card with the tone
sequences.
50
Phone
Note You should not store any personal codes in your P910i, in
case your phone is stolen or lost.
Support for TTY
Teletype (TTY) accessory, text phone, is an aid for people with
speech impairments.
To use the TTY device together with the P910i
Contacts
Chat Edit Edit
Unfiled
Bank
+4613244500 p1#1234567890
p10#0#34#56789 balance (w)
p30#1234#56 account 1 (w)
p10#1#5678901 account 2 (w)
p20#123456789 (w)
1. Connect the TTY device to the accessories connector at the
base of the P910i.
2. In Phone, go to Edit > Preferences > TTY Accessory and select
the check box to set the P910i into TTY mode.
Refer to the TTY device user manual to find out how to use the
device. It may be necessary to use an adapter between the TTY
device and the P910i.
You can still make normal calls with the P910i in TTY mode but
other accessories such as handsfree will not work properly.
Do not open the flip during a TTY call. It will impair the quality
of the connection.
Note Support for voice carry over (VCO) and hearing carry
over (HCO) is handled through the TTY device and not through
the phone.
Support for ALS
Alternate line service (ALS) allows you to have two lines, and
two phone numbers, in one subscription. If you are not
subscribed to ALS, these dialogs and settings are hidden.
Using ALS, you can select which line to use for outgoing calls.
You can use the first line for any function, while the second line
can be used for speech only.
Incoming calls can be received at both lines at any time. The
name of the line is shown and the ring signal defined for the line
is used.
To select a line for outgoing calls
The preset line is shown by the icon in the status bar. If you want
to use the other line:
• With the flip closed, press
and select Switch to line 1 or
Switch to line 2 depending on the previously preset line.
• With the flip open, tap 2 and select Switch to line 1 or Switch
to line 2 depending on the previously preset line.
Corporate phone
services in P910i
The P910i can be used in a
corporate environment like
centrex, mobile centrex and
corporate switchboards (PABX)
equipped with a mobile
extension facility (like Ericsson
MD110 or Ericsson
BusinessPhone).
Phone
Edit
Chat Edit
02:00
Corporate call
John Smith
+442745551409 (w)
End call
New call
Call back
Intrude
Programmable feature
buttons
More
Used in a corporate
environment, the P910i provides
programmable feature buttons
for easier use of corporate phone services. When, for example,
you call someone who does not answer, you can press the button
Call Back to have the corporate system call you back as soon as
he is free.
Phone
51
To report that you are busy, click
(in standby mode) the PBX icon
> Command to send a
command to the PBX, such as In
meeting until..., Course, or
Business trip. The switchboard
operator can then answer
incoming callers that you are
busy and when you will be back.
All those commands that you
used to dial to the corporate
switch can now be replaced by a
command button with clear text.
When storing numbers in Contacts you should use the
international number format, starting with +. This allows you to
use Contacts when you are outside the corporate telephony
environment, when you are abroad, and when you are sending
SMS or MMS messages.
Phone
Edit
Chat Edit
Commands
Select command
Incoming calls via the PBX may be routed to the P910i as well
as to your desk phone, and you can answer in either telephone.
When talking on the P910i, you may hand over the call to the
desk phone by calling that phone, answering it and hanging up
the P910i. You can also hand over a call from the desk phone to
your P910i.
Meeting
Business trip
Sick leave
Corporate voicemail
Lunch
Gone for the day
Vacation
Course
Cancel
Using corporate phone
service
To place an internal call, dial an internal (short) number or an
external (long) number. The phone sets up the call through the
corporate switch, so that during the call you can utilize all
corporate features like call back, interrogation, conference and
switchboard operator services. When dialing an external
number, you do not need to dial the external line prefix; it is
added automatically.
Note When traveling abroad, use your phone as a normal GSM
phone, entering Phone > Edit > Preferences> Calling Cards and set
the calling card to Call directly.
52
Phone
Configuring corporate phone service
Your corporate phone administrator can program feature
buttons, call routing, and commands in your phone via a
settings file. Contact him to receive a user guide valid for the
company and the configuration file, either via email or down
load from the intranet.
See “Corporate phone services” on page 57 on how to install
corporate phone service.
For more information on corporate telephony go to
www.sonyericsson.com/professionalsolutions
Preferences
In this menu you can change the settings for the phone options.
(Settings on your P910i that are system-wide and affect more
than one application are made from the Control panel, see
‘Control panel’ on page 145).
To set the phone preferences
1. In the Phone program select Edit > Preferences.
magic word you can also press and hold the Jog Dial or press the
handsfree set call button.
Note Magic word is not supported with the Bluetooth headset/
car kit in the P910i. Instead of magic word, push the button on
the Bluetooth headset. After a confirmation tone, you should say
the name.
• Voice dialing – Select or unselect the checkbox.
Incoming call picture
• Magic word – Select the cases where you want to use the
magic word when you use voice dialing. You must, however,
record a magic word before you can select to use it. Using
Magic word will increase battery drain.
If an incoming caller has a picture stored in Contacts it will be
shown on the screen. Select the checkbox to show a large
version of the picture over the whole screen.
• Voice answer – Select or unselect the checkbox. Tap On if you
want to answer or reject incoming calls by voice commands.
You must first record voice commands for Answer and Busy.
2. Select the item to set up.
Voice control
The voice control option lets you manage calls using your voice.
With Voice answer you can use words recorded for ‘answer’ and
‘busy’ to answer or send a busy signal to an incoming call. With
Voice dialing, you can make a call by saying the contact’s name.
A magic word ensures that the P910i will not call somebody
whose name has just been mentioned by chance.
Say the ‘magic word’ and then the name of the person you want
to call, and the P910i will try to call the person. Instead of the
• Play caller name – If you have recorded a name for a person in
Contacts, the P910i will tell you the person’s name when he
or she calls you. This is useful when using your P910i
together with a handsfree.
• Voice commands – A list of the voice commands. A balloon
means that a voice command is recorded for the command.
To record a voice command
1. Select one of the options, Magic word, Answer, or Busy and tap
Record.
Phone
53
2. Say the magic word, the answer command or the busy
command after the tone.
If you are recording a magic word, make sure that you
choose a long unusual word, which can easily be
distinguished from ordinary background speech.
3. Select Play to check the quality of your recording.
4. Select Done to exit.
You are advised to record voice commands in a quiet
environment to maximize recognition.You also have to select
the voice commands carefully, so it does not activate by mistake
from environment sounds.
To record voice commands for individual contacts, see
‘Creating and editing contacts’ on page 104.
• Answering mode – Select the option you want.
– Normal – Answer calls as normal.
) on the keypad to
– Any key – Press any key (except
answer.
– After 5 seconds – P910i answers automatically after five
seconds.
You can also select to use a Bluetooth headset as the preferred
sound device. See ‘Pairing’ on page 135 for information on how
to establish connection with the headset.
• Bluetooth: Preferred Handsfree – Select the option you want.
– Phone – Use the keypad to manage incoming and outgoing
calls.
– Headset – Use the headset or the keypad to manage
incoming and outgoing calls.
Add to contacts
This is a function for adding called and calling parties to
Contacts. After a call has ended, if the phone number is not
already stored in the Contacts, you are asked if you would like to
add it.
Set the function On or Off.
Forward calls
You can forward incoming calls to another number if for any
reason you are unable to answer them.
To forward calls
1. Select the type of call you want to forward.
Handsfree
2. Specify the phone number you want to forward to.
Specify how to manage calls when the P910i is used with a
handsfree kit connected.
3. Select Done.
54
Phone
The settings are stored in the network. Tap Refresh to receive the
current settings.
Tip Normally the data/fax options should not be changed.
Accept calls
You can specify who should be able to call you. All other callers
will be rejected. Your options are:
– All callers – Everybody can phone you.
– Listed callers only – Only people on the Accept callers list
can phone you.
– Contacts – Only people in your Contacts address book can
phone you.
– Speed dial list – Only people in your Speed dial list can
phone you.
– No one – No one can phone you. You can still receive
messages such as SMS, MMS and email.
To add a contact to the Accepted list
Call waiting
Use these settings to control how P910i handles incoming calls
during an ongoing call.
• On – You will be alerted by incoming calls.
• Off – The P910i sends a busy tone to the calling party.
Restrict calls
You can set restrictions for calls made from or to your P910i.
You can, for example, protect it from being used for longdistance calls.
To restrict incoming calls
1. Select the Incoming tab.
2. Set restrictions for:
– All incoming calls.
– Incoming calls when roaming. Use this to avoid costs for
incoming calls when traveling abroad.
1. Select Add new.
To restrict outgoing calls
2. Select Lookup and choose a contact, or write the name and
number of the contact.
1. Select the Outgoing tab.
3. Select Done.
Tap a contact on the list to remove it.
2. Set restrictions for:
– All outgoing calls.
– Outgoing international calls.
– Outgoing international calls except to your home country.
Phone
55
Voicemail
For easy voicemail access, enter the number of your voicemail
box.
With the flip closed, press and hold
to call this number.
With the flip open, select Phone > Call voicemail.
Note It is possible to include DTMF tones in the number. Insert
a p before the tones.
Calling cards
Calling cards are used together with some phone services, which
means that calls are set up via a calling card server. These
settings specify how P910i handles calling cards. Most Calling
card settings are protected by the Device lock, see ‘Device lock’
on page 38.
– Calling card mode – Select how to use the selected calling
card.
– Calling cards – A list of your calling cards.
– Selected card – Select which of your calling cards you
want to use.
Please consult your calling card supplier for more details.
To create a new calling card
Select New and enter the account information.
56
Phone
• Access tab:
– Name – Enter a name for the calling card account.
– Access number – Enter the phone number of the calling
card server.
– Verification code – Enter the verification code.
– International prefix – Enter the international prefix used by
the server.
• Set up tab:
– Sending order – Number then code means that the P910i,
after you have connected to the server, first sends the
phone number you have entered, and then sends the
verification number. Code then number means the opposite
order.
– Delay for number/code – Set a time delay between the
moment the calling card answers the call and the P910i
starts sending tones.
Some international calling card services instruct their users to
select a language by pressing a digit. When using the P910i
calling card feature, you can insert such a digit in one of these
places:
• Immediately after the access number, but preceded by a
pause sign, p.
• In the verification code.
• In the phone number that you dial.
Corporate phone services
You set up corporate phone services by importing a .pbx type
settings file from your corporate IT-manager. This file can be
received via email, stored on the Memory Stick or downloaded
from Internet.
GPRS Alert
Note Make sure the file is authentic before you import it.
TTY Accessory
To set up corporate phone services
Select the check box when you want to use the P910i together
with a TTY accessory. Teletype (TTY) accessory, text phone, is
an aid for deaf and speech-impaired people.
1. Place the file in the Document > Unfiled folder of the P910i or
the Memory Stick.
2. Select Edit > Preferences > Calling cards and enter your device
lock code.
3. Tap Import.
4. Select the settings pbx file and tap Import.
5. Select the card among the imported cards in the Selected card
control.
6. Activate the card by setting the Calling Card Mode to either
Always use calling card or Prompt before call.
Incoming call behavior
When you answer a call when the flip is open the default
behavior is for the P910i to switch to the phone program. Select
the check box if you prefer to stay in the ongoing program when
you answer a call with the flip open.
If you make a new telephone call you can interrupt an ongoing
GPRS session, for example, an incoming email. Select the check
box to get a warning in such a case.
AoC - Call meter settings
Advice of Charge allows you to keep track of the cost of calls
and to stop the P910i from making chargeable calls when a
certain credit limit has been exceeded. The Advice of Charge
option only appears in the list if it is supported by your current
subscription.
If the credit is limited, a Low credit warning is displayed, when
there is approximately thirty seconds of credit left. When the
credit runs out, Credit expired is displayed and ongoing,
chargeable calls are stopped.
Please refer to the Help system for detailed information about
the Call meter settings.
Note PIN2 is required from your network operator for storing
any changes you make to the Call meter settings.
Phone
57
Not all networks provide charging information to the phone
during a call. If your network provides this service and your
subscription is for Advice of Charge Charging, you cannot make
or receive any chargeable calls if you are roaming in a network
that does not provide charging information.
ALS settings (subscription dependent)
Use Alternate Line Service to make calls on two lines with
separate phone numbers. Some of the phone settings are used on
a per line basis. In most cases, the settings displayed apply to the
selected line. This is then indicated in the dialog title bar. In
other cases, the lines correspond to separate settings or tabs in
the dialogs.
To set the line tags
1. Select the ALS settings dialog.
2. Edit the names for line 1 and 2.
3. Tap Done.
58
Phone
MEDIA
CommuniCorder
With the built-in CommuniCorder camera you can record video
clips and take pictures, view them on your phone screen and
send them directly to friends or colleagues via multimedia
messaging. You can also send the video clips and pictures you
have saved in your P910i via messaging, infrared
communication or Bluetooth wireless technology to, for
example, a PC. It is also possible to exchange video clips and
pictures between the P910i and the Web.
The pictures in your P910i can be set as background, wallpaper,
or they can be added to the contacts in your phonebook. See
‘Personalizing your P910i’ on page 142 to find out more about
using pictures.
A button
on the camera activates the
CommuniCorder application and acts as the
shutter release when taking pictures.
Still camera
Indoor
Set for indoor light
Still camera
Outdoor
Set for outdoor light
Still camera
Message
picture
Set for picture size 160x120
pixels
Video camera
Message
video
Set for video clips to be
appended to messages
Recording video clips
You can record a video clip with the flip open as well as closed.
To record a video clip
1. Press the camera button
application.
to activate the CommuniCorder
2. Rotate, if required, the Jog Dial to the Video mode or
Message video if the video clip is to be sent in an MMS.
The Jog Dial is used to set the
CommuniCorder working mode:
Video camera
Video
Automatic setting
3. Press again to start recording. The status indicator flashes red
during the recording.
Still camera
Auto
Automatic setting
4. Press the Jog Dial to stop recording. The video clip is
automatically saved in Video.
Still camera
Night
Set for dark environment
CommuniCorder
59
You can also press the Jog Dial, or, when the flip is open, tap the
capture button
at the bottom of the screen to record a
video clip.
By default the video clips you record are stored internally in the
Unfiled folder. Tap the folder menu to the right in the menu bar to
change the storage location to another location, for example, on
a Memory Stick. See ‘Folders’ on page 28 for more information
on using folders.
To send a video clip you have just recorded in flip closed, select
To delete a video clip you have just recorded in flip closed,
select Delete clip from the flip closed context menu.
To manage video clips, tap
to go directly to Video. See
‘Video’ on page 68 for more information.
Delay timer
CommuniCorder has a delay timer with a delay of 1-25 seconds.
The delay time is the time between the moment you activate the
shutter release and the moment when the recording starts.
Send as MMS from the flip closed context menu. In flip open, tap
To set the delay time
Note Most operators only accept video clips of 10 seconds
length or 95 KB size.Use the Message video mode, or the Video
limit setting in Video mode to limit the file size.
Open the flip to access the full range of CommuniCorder
settings. With the flip open, the CommuniCorder is activated by
selecting
To delete the last video clip
1. Select CommuniCorder > Delete clip.
2. Confirm the delete operation.
60
CommuniCorder
1. Tap CommuniCorder > Preferences.
2. Tap
and set the desired delay time
To record video with delay timer
1. Tap CommuniCorder > Delay timer.
2. Press the camera button. The timer beeps for the set time and
a timer icon is shown before the recording is started.
When the delay timer is set, you will see the timer status icon
3. Tap CommuniCorder > Delay timer to deactivate the timer.
Video status
Above the viewfinder, you will find the video status. Icons show
whether the CommuniCorder is ready or busy, video quality, and
audio quality. A number indicates how much time you have left.
The calculation is based on the current settings plus available
space on the storage location you have selected (internal or the
Memory Stick).
a Memory Stick. See ‘Folders’ on page 28 for more information
on using folders.
To send a picture you have just taken in flip closed, select Send
the flip closed context menu. In flip open, tap
as MMS from
Open the flip to access the full range of CommuniCorder
settings. With the flip open, you activate the CommuniCorder
by selecting
or pressing the camera button
Taking pictures
To view the last picture
You can take a picture with the flip open as well as closed.
1. Select CommuniCorder > View picture.
To take a picture
2. Select Done to return.
1. Press the camera button
application.
to activate the CommuniCorder
2. Rotate, if required, the Jog Dial to the desired mode.
3. Press again to capture the image on the screen. The picture is
automatically saved in Pictures.
You can also press the Jog Dial, the
flip is open, tap the capture button
screen to take a picture.
button, or when the
at the bottom of the
To delete the last picture
1. Select CommuniCorder > Delete picture.
2. Select Delete to delete the picture.
To delete a picture you have just taken in flip closed, select
Delete picture from the flip closed context menu.
To manage or edit the picture, tap
to go directly to Pictures.
See also ‘Pictures and Image editor’ on page 64.
By default the pictures you take are stored internally in the
Unfiled folder. Tap the folder menu to the right in the menu bar to
change the storage location to another location, for example, on
CommuniCorder
61
Delay timer
CommuniCorder has a delay timer with a delay of 1-25 seconds.
The delay time is the time between the moment you activate the
shutter release and the moment when the picture is taken.
To set the delay time and the picture freeze time
1. Tap CommuniCorder > Preferences.
2. Tap
and set the desired delay time.
In this dialog box you can also set the picture freeze time. This
specifies the time the picture stays unchanged in the screen after
you have taken it.
To take a picture with delay timer
1. Select
2. Tap CommuniCorder > Delay timer.
3. Press the camera button. The timer beeps for the set time and
a timer icon is shown before the picture is taken.
When the delay timer is set, you will see the timer status icon
4. Tap CommuniCorder > Delay timer to deactivate the timer.
Image status
Above the viewfinder, you will find the image status. Icons
show whether the CommuniCorder is ready or busy, delay timer
62
CommuniCorder
status, picture size and picture quality. A number indicates how
many pictures you have left. The calculation is based on the
current settings plus available space on the storage location you
have selected (internal or the Memory Stick).
Camera settings
You may want to change some of these settings if, for example
you are taking a picture in daylight or in dark surroundings. You
can also choose what resolution, size and quality, you want for
the pictures you take.
Note Depending on which mode you are using, some settings
may be fixed (and not user adjustable).
The icons in the upper right corner of the main view reflect the
quality and size settings of the pictures and video clips and also
the sound quality of video clips.
To restore default CommuniCorder preferences
1. Tap CommuniCorder > Preferences.
2. Tap Default.
3. Tap Yes.
To change preferences for the camera
1. Tap CommuniCorder > Preferences.
2. Select the setting you want to change:
Move the slider to change the brightness of the picture.
Move the slider to change the contrast.
Turn the backlight On when the light behind the subject is
brighter than the light in front of the subject.
Turn the flicker free function On to reduce the effects of
flicker from, for example, fluorescent light.
Choose white balance according to the lighting conditions
you are in when taking the picture.
For pictures, choose quality and size. The picture sizes,
640x480, 320x240 and 160x120, are displayed in pixels.
For video, choose quality for video and audio.
Larger size and higher quality use more memory.
Choose delay time and freeze time for the still camera, and
delay time and Video limit for video.
CommuniCorder
63
Pictures and Image editor
In Pictures you can manage all pictures saved in your P910i.
The pictures can be taken using the CommuniCorder or received
via Messages, Bluetooth wireless technology or infrared
communication. They can also be downloaded via the browser
or transferred from your PC via a cable. Your P910i supports
JPEG, GIF, MBM, PNG, WBMP and BMP picture formats. In
the Image editor you can perform basic editing of JPEG
pictures.
Pictures
You can send the pictures to
others, add them to the contacts
in your phonebook, or use one as
a background image (wallpaper)
or screensaver.
Pictures
Chat Edit Edit
All
64
Pictures and Image editor
Tip To take a new picture, tap
to go to the CommuniCorder.
Move among the pictures with the arrow buttons or Jog Dial.
You can search for specific pictures and sort your pictures by
name, date, size or type. Tap Edit to choose how to sort the
pictures.
Detail view
Tap a picture or select it with the Jog Dial to open it. Specify in
Edit > Preferences if pictures should open in detail view or full
screen view.
Brioney
Mer de gla...
In the detail view, you can rename your pictures and sort them
into folders. This makes it easier for you to keep track of your
pictures. Read more about organizing files in ‘Folders’ on
page 28.
Thumbnail and list
views
Tap
and
to change
between the thumbnail view and
the list view.
The thumbnail view gives an overview of all the pictures in your
P910i while the list view shows a more compact list. At the
bottom of the screen you can see how many pictures you have
saved in the current folder.
Mont Blanc
Wakeboard
12 pictures (890Kb)
To rename a picture
1. Select Pictures > Rename picture.
Pictures
Chat Edit Edit
Photos
Zooming pictures, widescreen and full
screen
2. Enter a picture name > Done.
From the detail view of the picture you can:
Note Two or more pictures
cannot have the same name.
• Tap
At the bottom of the screen you
can see the picture information,
for example, the size of the
picture and the date the picture
was taken.
and
to zoom in and out.
• Tap and drag the zoomed picture to view specific details in
the picture.
• Tap a picture to display it over the whole screen. Tap it again
to zoom in or zoom out. Press the Jog Dial backwards to
return to the detail view.
JPG-0002
10:15am,21/06/04
Use
and
or the Jog Dial to
move between the pictures in the
current folder.
takes you back
to the thumbnail or list view.
Sending and receiving pictures
Select Pictures > Send as to send pictures to other phones or to a
PC via multimedia messaging, IR or Bluetooth. See ‘Sending
and receiving items’ on page 30. You can also save pictures that
you have received via email and multimedia messages. See
‘Incoming multimedia messages’ on page 91 and ‘Receiving
attachments’ on page 96.
Pictures in JPEG can also be imported/exported from/to a
memory card.
• Rotate the Jog Dial to browse the pictures in widescreen
view.
Moving, copying and deleting
From the detail view of the picture you can:
• Select a folder from the folders menu to move the picture to
that folder (internal or on a Memory Stick). See ‘Folders’ on
page 28 for more information.
• Select Pictures > Copy to to copy the picture to another folder
(internal or on a Memory Stick).
• Select Pictures > Delete picture to delete it.
• Select Pictures > Copy picture to copy the picture to a clipboard
so that you can paste it into an item in another application.
Note Pictures with Forward lock cannot be sent further.
Pictures and Image editor
65
To copy, delete or move multiple pictures
Editing pictures
• In the thumbnail and list views, select the check boxes beside
the picture names. Then select Pictures > the command you
want.
Editing is controlled from the toolbar below the picture. Tapping
the tool icons will bring up a palette with choices:
• To copy and delete pictures you can also use the Storage
Manager found in the Control panel. For more information,
refer to ‘Folders’ on page 28.
Image editor
Using the Image editor, you
can edit JPEG images.
You can
• crop and resize the pictures
• rotate them by 90° at a
time
• write and draw on them,
using different colors
To start the Image editor
From a picture opened in
Pictures, select Edit > Edit
picture.
66
Pictures and Image editor
Image editor
Edit
Zoom in
Zoom out
Select color
Select one of the 16 colors
Select pen
Select one of the 4 pen sizes
Select
drawing tool
Select one of the tools:
- Pen for freehand drawing
- Undo last action
- Undo all actions
- Add text
- Crop picture
- Resize picture
Select rotation Select rotation – clockwise or anti-clockwise
You can save the edited image by selecting Image editor > Done.
Copy and paste by selecting Edit > Copy and Edit > Paste. You can
only copy and paste whole pictures.
If you make an error when editing the picture, you can undo the
last change by Edit > Undo. You can also undo all actions since
the picture was saved, by selecting Edit > Undo all.
• You can return to the text editor by tapping on the text item.
To zoom in and out
This is not available in all formats.
• Tap
Note As soon as you tap outside the text item, the text is merged
with the picture and cannot be edited or moved.
to zoom in.
• Tap and drag the zoomed picture to view specific details in
the picture.
To crop a picture
• Tap
1. Tap
and select the cropping tool
A frame with 8 handles is placed around the picture.
to zoom out.
• Select Edit > Zoom, and select between Fit to screen and Full
size.
3. Tap anywhere, except on the handles, to crop the picture.
To draw on a picture
1. If desired, tap
and select the desired color.
2. If desired, tap
and select the desired pen size.
3. Tap
and select the pen tool
4. Draw with the stylus on the picture.
and select the text tool
To resize a picture
1. Tap
and select the resizing tool
A frame with 4 handles is placed around the picture.
2. Tap and drag one of the handles to define the new size of the
picture.
When you lift the stylus, the picture will be resized.
To add text to a picture
1. Tap
2. Tap and drag one of the handles to define how the picture
should be cropped.
2. Tap the place where the text should be put on the picture.
Sony Image Station
3. Enter the text in the text field.
4. If required, change the text properties, using the choices on
the text, style and colors tabs.
You can exchange pictures between your P910i and Sony Image
Station on the Web. Use the browser in your P910i to go to the
relevant Internet site and sign up:
5. Tap Done to place the text on the picture.
• For Europe: http://www.sonystyle-imaging.com
• You can move the text on the picture by tapping and dragging
on the text.
• For Japan: http://www.imagestation.jp
• For USA: http://www.imagestation.com
Pictures and Image editor
67
Video
You can play video content that is recorded with the
CommuniCorder, stored in your P910i or streamed. You can
also play audio-only material which is encapsulated within an
MPEG file or streamed. You can download video clips from an
Internet site or transfer from a PC via a cable, or from a Memory
Stick. You can also exchange video clips with other phones or
PCs via infrared communication, Bluetooth wireless technology
or multimedia messaging.
You do not have to download a complete video clip to be able to
view it. You can use the streaming function and view the video
clip from the Web site where it is located. The video clip is
played with only a short time delay.
The video player supports files in the MPEG-4 file format, for
example name.mp4.
Video clips
A video clip is a short video sequence.
Playing video clips
The Video player opens in the list view. In this view, you get an
overview of all the MPEG-4 video clips in your P910i. You can
search for specific video clips, zoom the video clip names and
sort them by name, date, or size. At the bottom of the screen you
can see how many video clips you have saved in your P910i.
To view a video clip
1. Select
Video.
2. Select a video clip in the list.
You can store video clips both internally and externally. You can
also copy them between the internal memory and the Memory
Stick. See ‘Folders’ on page 28.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear, or if you
are using the stereo headset. Exposure to excessive volume
levels may damage hearing.
To adjust the volume
Rotate the Jog Dial up to increase the volume, and down to
decrease the volume.
While a video clip plays, tap the screen to display the video clip
in widescreen. Tap the screen again to go back. Specify the
screen orientation in Edit > Preferences > Display.
68
Video
To copy, delete or move multiple video clips
• In the list view, select the video clips you want to delete,
move or copy, by selecting the check boxes beside the picture
names. Then select Video > the command you want.
• To delete you can also use the Storage manager found in the
Control panel. For more information, refer to ‘Folders’ on
page 28.
To sort the video clips
Select Edit and choose how you want to sort the video clips in
the current folder.
To record a clip using the CommuniCorder
Press the camera button
or select
to activate the
CommuniCorder application.
takes you back to the list
view.
Managing video clips
The detail view is intended for managing one clip at a time. You
can play and pause the clip by tapping
and
, and stop by
tapping
The slider under the video area shows the current play position
within the clip. Tap and drag the slider to move to another
position.
In this view you can send,
rename, delete or move your
video clips. Only the video
clips saved in your P910i or
on the Memory Stick (that is
not streamed) can be handled
in the detail view.
Video
Chat Edit
Edit
Diving in the ocean
Sports
To rename a video clip
1. Select Video > Rename clip.
2. Enter a video clip name >
Done.
Two or more video clips
cannot have the same
name.
Playing
0:09
Tip Use the Folder function
to organize all your video
clips.
To copy the current video clip to another folder, select Video >
folder from the list.
Copy to, then select a
To view the video clip information
Select Video > Info.
Video
69
To delete a video clip
1. Select the video clip you want to delete.
2. Select Video > Delete clips.
Saving video clips
When you play video clips that you have received via email or
multimedia messaging, or that you have downloaded to your
P910i from the Web, the viewer detail view is automatically
launched. From the viewer detail view you can then save the
video clip to your P910i.
Streaming
Streaming is a data transfer method making multimedia
available in real-time. You can, for example, listen to audio and
watch video almost at the same time as it is sent.
The data in the file is divided into small packets that are sent in a
continuous flow, a stream.You can then begin viewing the file
from the beginning as the rest of the packets are sent. The short
delay at the start is to enable a small amount of data to be
buffered.
Your P910i can receive streaming multimedia.
To save a video clip from another application
1. Select the video clip you want to save.
Applications
2. Select Video > Save clip.
Streaming applications can be classified into on-demand and
live applications.
3. Select the folder you want to save the video clip in > Save.
Examples of on-demand applications are:
Sending and receiving video clips
You can send and receive video clips using Video > Send as. See
‘Sending and receiving items’ on page 30.
• Streaming of music.
• Streaming of news (video and audio).
• Streaming of movie trailers.
• Streaming and download of video.
• Live streaming of music or video (broadcast).
70
Video
How to connect to a streaming service
Preferences
• If you know the URL of the streaming service:
When you view a video clip in full screen mode, you can select
the orientation of the picture
1. Select Video > Open location.
2. Enter the URL of the streaming service, or select a service
from the drop-down list.
3. Tap Done.
• If you do not know the URL of the streaming service:
1. Open Internet and browse to the site where the service is.
2. Select the item you want to play, for example a video.
The site server will download part of the video to the P910i
buffer memory. This will take a short while. When the buffer
memory is filled, the Video player will open the detail view,
described above, and play the video seamlessly.
To change the orientation of the picture in full screen mode
1. Select Edit > Preferences.
2. Select the Display tab.
3. Tap Left-handed or Right-handed orientation > Done.
When you view a video clip from a Web site, using the
streaming function, a media buffer is used to provide a steady
flow of data. Increasing the size of the media buffer may
improve the play-back of the video clip.
To change the media buffer size
1. Select Edit > Preferences.
2. Select the Buffering tab.
3. Select Custom setting and move the slider left or right > Done.
When you download a video clip to your P910i, it is saved in the
download cache memory. When this memory is full, you have to
empty it to be able to download new video clips to your P910i.
To clear the download cache
1. Select Edit > Preferences.
2. Select the Buffering tab.
Video
71
3. Select Clear Cache > Done.
When you view a video clip from a Web site, you may have to
set the proxy settings.
To change the proxy settings
1. Select Edit > Preferences.
2. Select the Proxy tab.
• If the proxy settings set in the control panel are to be used,
tap Automatic configuration.
• If the manual settings are to be used, enter the relevant
information.
72
Video
Music player
Your P910i has mobile music in the form of a stereo music
player. With the music player you can listen to single music
tracks or entire folders with tracks. You can download tracks to
your P910i from a PC, the Internet or Memory Stick, and create
different folders with tracks. Your P910i supports a number of
different sound files, including the popular MP3 format. See
‘Technical data’ on page 195 for more information on supported
file types.
You can store sound files both internally and on the Memory
Stick. You can also copy them between the internal memory and
the Memory Stick. See ‘Folders’ on page 28.
If you navigate to the standby screen while you play music, you
can press
to pause. Press it again to play.
Press
to go back to the standby screen and launch another
application. The music will still play. If this application requires
dedicated audio, the playback will be paused.
If you use the Music player a lot, it can be useful to create flip
closed and flip open shortcuts to it. This way you can quickly
access the Music player when you for example want to adjust
the volume or change track folder. Refer to ‘Application
shortcuts’ on page 145 for more information.
When you receive a phone call while listening, the playback will
be paused. When you end the call, you must navigate back to the
Music application to restart playing.
Jog Dial control
Rotate the Jog Dial to select a sound track. Press it inwards to
play. Press it again to stop.
Tip To listen to more music you can store music on several
Memory Sticks and carry them with you.
To adjust the volume
Rotate the Jog Dial up to increase the volume, and down to
decrease the volume.
Playing sound files
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear, or if you
are using the stereo headset. Exposure to excessive volume
levels may damage hearing.
You can play MP3 music both in flip closed and in flip open. In
flip closed, with the Jog Dial, select
, select Music player, and
select the track you want to play. Press
to find other
commands.
Music player
73
Track-folder view
This view is intended for
playing entire folders with
MP3 files. In the track-folder
Play,
view you can
Pause, and
Stop the
playback of the current folder,
and see the duration of the
track. Selecting a track and
tapping
will play the
selected track and all the
following tracks in the folder.
Use the slider to move
forwards and backwards in
the track. Select Music >
Manage tracks to move to the
file list view.
Music
Edit
All
Sony Ericsson
Managing sound files
0:00/3:35
File list view
Aeroplane
Beautiful Night
Rooster
Song for you
Sony Ericsson theme
Standing Still
Loop and random
With the loop function you can decide if you want to listen to
the tracks in the current folder only once, or if you want to loop
them until you manually stop the play-back. Select the random
function to play the tracks randomly.
To loop a list
Select Music > Loop.
To play a list randomly
Select Music > Random.
In the file list view you can
see how many tracks you
have in the current folder.
Tapping a file name will open
the detail view, and allow you
to play and manage that file.
To copy, delete or move
multiple files, select the files
you want to delete, move or
copy, by selecting the check
boxes beside the file names.
Then select Music > the
command you want.
Music player
Edit
Aeroplane
Beautiful Night
Rooster
Song for you
Sony Ericsson theme
Standing Still
Stuck with You...
Walk on
8 tracks (6806 KB)
To delete you can also use the
Storage manager found in the
Control panel. For more information, refer to ‘Folders’ on
page 28.
Tap
74
Music
to move directly to the track-folder view.
All
Detail view
To delete a track from the P910i
The detail view is intended for managing one file at a time. Tap
a file name to open the detail view. You can also play and pause
the file by tapping
and
1. Select Music > Delete track.
In the detail view you can move tracks between your different
folders using the folder function, or rename or delete them.
Viewer
The detail view displays the
name of the track, the artist’s
name, the album title, the
track number, the copyright
year, the sound file type and
the duration of the track.
Note The amount of
information displayed
depends on how much
information is available on
the sound file.
Music
Edit
Unfiled
2. Select Yes.
If you play sound tracks remotely, for example music on an
Internet site, a view similar to the detail view displays. The
commands you find in this view are similar to those in the Detail
view.
Aeroplane
Managing track folders
Artist:
Album:
Filename:
Aeroplane
Date and Size:
6:02pm, 21/06/04
Duration:
3:35
Move between the tracks in
the current folder using the
and
buttons.
To rename a track
1. Select Music > Rename track.
2107KB
0:00
In the track-folder view, the Music player plays the MP3 files of
the selected folder. (With one exception, the All folder. If you
select this folder, all MP3 files in all music folders will be
played.) Using the folder function you can create new folders
for sound tracks. You can create folders on the Memory Stick.
You can also use several Memory Sticks for your music, for
example.
In any Music player view, you can create a new folder using the
in the folder menu. Then you move or
copy your sound files to the new folder. You can add more
folders with sounds as long as there is memory available. You
can also sort the files using commands in the Edit menu.
Edit Folders command
2. Enter a track name and tap Done.
Two or more tracks cannot have the same name.
Music player
75
Preferences
You can choose if you want all types of sound files to be
displayed in the file list view, or if you want to display only a
certain type of sound file.
To select sound file types
1. Select Edit > Preferences from the file list view.
2. Check the boxes next to the sound files you want to include
in the track folders and tap Done.
Saving sound files
When you receive sound files in other applications, such as
email and multimedia messages, you activate the viewer in your
P910i. From the viewer you can then save the sound file
to your P910i.
To save a track from another application
1. Tap the save (floppy disk) icon or select Music and tap Save.
2. Select the folder you want to save the track in and tap Save.
Sending and receiving sound files
You can send and receive sound files using Send as. See
‘Sending and receiving items’ on page 30.
76
Music player
Note You can send WAV and AMR sound files in multimedia
messages, and MP3 and AU sound files as attachments to
multimedia messages.
Internet
You use
Internet, the
P910i browser, to:
• Connect to the Internet to view and access Web and WAP
pages.
• Receive and view Push messages from your WAP service
provider.
• Download Java applications, images and audio.
The browser can open Web pages that use Java script or frames,
but functions that use Java script in the Web page will not work
properly.
You can save bookmarks to viewed pages, to be able to access
them easily. You can also save pages in the P910i for off-line
viewing.
The browser uses folders for categorizing information. The
folders used are bookmarks, saved pages, signed documents,
and Push messages.
Push messages is a service that gives you notifications about, for
example, weather forecasts, sport results, and stock quotes. The
notification is sent to you as a message that contains a WAP link
to the site with the information you subscribe to.
Before you can use Internet, you need to set up an Internet
account in the Control panel. If you intend to use certain WAP
services it might be necessary to set up a WAP account in the
started with Internet and
Messages’ on page 169.
Control panel as well. See ‘Getting
To start the browser Start the browser by:
– pressing the Internet button.
– selecting
in the application picker.
– selecting
in the application
launcher
– selecting a URL in another application.
Note If required, you have to enter your username and
password to log in to your Internet account.
While opening a page, the P910i might not receive incoming
calls. However, when the page is properly opened you can
receive a call and the page will still be open.
The application has two views:
Browser view The base view of the application, where you can
view Web and WAP pages.
Bookmarks
view
A list view where you can save shortcuts:
• to Web and WAP sites on the Internet
• to locally stored pages
• to documents digitally signed by you.
Internet
77
Using the browser view
The P910i can display the
Internet page in normal view
or full screen view. Use the
Internet button to change
between the views. In full
screen view, press the Jog Dial
forwards to display a menu
with the most frequently used
commands.
Browser view options
•
– Open page – Enter the URL, or select from the drop-down
list.
– Add to bookmarks – Enter the name of the bookmark and
select the folder to save it in.
– Save page – Enter the name of the page and select the
folder to save it in.
– Send as – Send the current URL via text or multimedia
message, email, Infrared, or Bluetooth wireless
technology.
– Find – Enter text and search for the text in the page.
– Find next – Search for the next occurrence of the search
text.
– Scan text – Go to the area with the greatest amount of text.
– Back – Move back to the previously viewed page.
– Reload page – Reload the page.
– Load all images – Load all images of the page.
– Page information – Show the page information.
– Bookmarks – Open the bookmark view.
0:03
Internet
Edit
Chat Edit
Sony Ericsson
A Internet menu.
B Edit menu.
C Go to the next page.
D Go to the previous page.
E Shift between the browser view and the bookmarks view.
Disconnect or get information about the connection.
G Go to the home page.
H Stop loading the page.
A secure connection is established.
K Progress bar, shows the loading progress.
Internet menu
•
Edit menu
– Cut – Cut out the marked information from an input field.
– Copy – Copy the marked information.
– Copy all – Copy all information on the page.
78
Internet
–
–
–
–
–
–
•
Paste –
Paste the copied text into the selected field.
Full screen – Expand the browser view.
Narrow layout – Adjust web page to screen width.
Zoom – Select zoom level: Small, Medium or Large.
Preferences – Set the preferences of the browser.
Help – View help on Internet.
Internet button
– Full screen – When you have opened an Internet page,
press the Internet button to display the page in full screen.
– Normal browser view – Press the Internet button again to go
back.
• Handles on the screen – Use the handles on the screen to scroll:
– Scroll up and down – Tap the handle to the right of the
screen and drag it up or down.
– Scroll left and right – Tap the handle at the bottom of the
screen and drag it to the left or to the right.
•
Jog Dial
– One hand navigation – In an open page, rotate the Jog Dial
slowly to go to next link. Press the Jog Dial inwards to
select the link.
– Scroll up and down – In an open page, rotate the Jog Dial
fast to scroll up and down.
– Scan text function – Press the Jog Dial inwards (when no
link is selected) to scan the page for text. The screen will
navigate to the area with the greatest amount of text.
Repeat the operation to find the next greatest area of text
– Short forwards – In Normal view, change between the
Internet and the Edit menus. In full screen view, show a
menu with the most frequently used commands.
Context-sensitive menus
The context-sensitive menu is opened when you keep the stylus
pressed on a link or a picture.
•
Text link and picture link
– Open link – Open the active link.
– Link information – Show information on the link.
– Add to bookmarks – Add the active link URL to the
bookmark list.
•
Loaded picture (with or without link)
– Save image – Save the picture in the P910i.
– Copy image – Copy the picture to the clipboard.
– View image – View the picture adapted to the screen
(enlarged or reduced).
– Send image as – Send the picture as text or multimedia
message, email, infrared, or Bluetooth wireless
technology.
Internet
79
•
•
Not loaded picture (with or without link)
To navigate through recently opened pages
– Load image – Load the picture.
1. Select
to move back to previously viewed pages.
Voice call link
2. Select
to move forwards again.
–
–
–
–
•
Call – Place a call according to the link.
New SMS – Send an SMS message according to the link.
– Send an MMS message according to the link.
New contact – Create a contact with the link information.
New MMS
Mail to link
– New email – Send an email according to the link.
– New MMS – Send an MMS message according to the link.
– New contact – Create a contact with the link information.
Icons within a page
Picture not loaded (can be loaded manually).
Damaged picture (not possible to load).
Note If images are not loaded, select the picture icons
or select Internet > Load all images.
To save a page for off-line browsing
1. Select Internet > Save page.
2. Change the page name, if required, and select a folder to save
it in.
3. Select Done.
To create a bookmark to the open page
1. Select Internet > Add to bookmarks.
2. Change the bookmark name, if required, and select a folder
to save it in.
3. Select Done.
To download and upload files, for example, applications
1. Select Internet > Open page.
• When you select a link to a downloadable file, for example,
applications, images and so on, information on the file is
displayed.
Select Yes to start the download.
2. Enter the page URL or select a previously viewed page from
the drop-down list.
• When you select a link for uploading a file, a form for
submitting the file is displayed.
To open a specific Web page
3. Select Open.
80
Internet
Select the file and select Yes to start the upload.
User authentication request
Whenever a user authentication is requested, you have the
possibility to either select a certificate and confirm the user
authentication, to select to continue anonymously or to cancel
the connection.
To view information on the open page
1. Select Internet > Page information.
2. Select the Content tab to view the page information.
3. Select the Connection tab to view information on the
connection.
If Connect anonymously has been set, the browser will instead
automatically try to connect anonymously.
4. Select the Certificates button to view the information on:
– Server
– User
Using the bookmark view
To disconnect from the Internet
1. Select the connection icon (HSCSD/CSD
in the status bar.
or GPRS
A Folder menu.
2. Select Disconnect from the pop-up menu
B Edit menu.
3. The dialog Do you want to disconnect, Yes/No appears.
C Internet menu.
4. Select Yes.
D Select an icon to view
information on the bookmark.
WIM Access
When the browser requires access to the WIM card, for
example, when establishing a secure connection, you have to
enter the correct PIN. For more information, please contact your
service provider or IT department.
E Checked bookmarks can be
deleted from the Internet
menu.
Select the bookmark text to
open the page.
Internet
Chat EditEdit
All
Search Internet
My home page
SonyEricsson
News
Webmail
Project home
711 time table
CSS fonts
G Select to go to the home page.
Signing documents
You have to enter the signing PIN each time a signing operation
is going to be performed.
H Shift between browser and
bookmarks views.
Internet
81
Bookmark view options
•
Internet menu
– Open page – Enter the URL, or select from the drop-down
list.
– New bookmark – Enter the URL, the name of the bookmark
and select the folder to save it in.
– Delete – Delete the selected bookmark.
•
Edit menu
– Edit – Edit the selected bookmark.
– Sort by date / name – Sort the entries. (Available for Push
messages and Signed documents only.)
– Zoom – Select zoom level: Small, Medium or Large.
– Preferences – Set the preferences of the browser.
– Help – Open the help for Internet.
•
Icons
Bookmark
Saved page
Push message from the WAP service provider
Signed document
To open a bookmark
1. Select the bookmark text.
2. The bookmarked item is opened.
To view bookmark information
1. Select the check box of the preferred bookmark.
2. Select Edit > Edit.
Folders menu
Information on the bookmark is shown. From the
information screen you can:
–
–
–
–
–
– Edit the bookmark.
– Delete the bookmark.
– Send the bookmark as an email, SMS message, Bluetooth
wireless technology, infrared, or MMS message.
All –
Show all contacts in the list.
Bookmarks – Show all bookmarks.
Saved pages – Show
all saved pages.
Show the bookmarks that are not in a folder.
Edit folders – Categories your contacts in folders (business,
personal and so on).
Unfiled –
The contents in the Folders menu can change depending on the
pages and bookmarks stored in the P910i.
To delete several bookmarks
1. Select the check box of the bookmarks to delete.
2. Select Internet > Delete.
3. Select Yes to confirm.
82
Internet
Preferences
The browser is initially set up to work, but you have to set up
your own account. A simple way of setting up an Internet
account is to use the Web phone setup-message generator on
www.SonyEricsson.com. See also ‘Internet accounts’ on
page 153 for more information.
The easiest way to set up Internet and WAP accounts is to ask
your Internet service provider to send you an auto setup message
containing the required setup information. The accounts will
then be set up automatically on your P910i. To guarantee the
integrity of the settings, a PIN may be used.
For security reasons, some WAP pages and services, for
example on-line banking, can only be accessed from a particular
WAP account. See ‘WAP accounts’ on page 163 for more
information.
Note Proxy settings for MMS messages, and for a WAP gateway
should be set in the WAP accounts. Other proxy settings should
be set in the Internet accounts.
To set up the browser
1. Select Edit > Preferences.
2. Perform the setup according to the following:
Basic settings
– Enter the URL for the page to be shown when the browser
is started from the Internet button; either a page stored in
the P910i or a page on the Internet.
– Select the WAP account to be used when the home page is
loaded. The accounts are set up in the control panel.
– Select if a new page should be displayed over the whole
screen.
– Select if you want to use a vertical scroll bar to scroll the
pages up and down. Otherwise you can use the Jog Dial.
– Select if images should be loaded. If images are not
loaded, the page will be loaded faster. Non-loaded images
can be loaded manually when viewing the page.
– Select if sounds should be played when the page is
opened.
– Select if animations should be played when the page is
opened.
Security settings
– Select if you want to save signed documents.
– Select if you want to connect without giving away your
identity.
– Select if you want to connect using the WIM card.
– Select if you want to allow cookies.
Internet
83
Advanced settings
– Select if you want to be able to receive messages from
your WAP service provider.
– Select if you want to automatically open the URL in WAP
Push messages.
– Select if you want to remove out-of-date messages
automatically.
– Select a sound that notifies you when a Push message
arrives.
– Set the size of the cache memory. The cache is the part of
the memory where viewed pages are stored. Stored pages
will load faster when you visit them again.
– Select Clear history to empty the list of pages visited and
cookies stored.
– Select Clear cache to empty the cache memory.
84
Internet
Games
There are two pre-installed games in your P910i. Traditional
Chess and the card game Solitaire.
More games are available on the Multimedia for P910i CD in your
original P910i box. You can also install games from other
developers, see ‘Installing applications’ on page 130.
– Played – Select if you want to play locally against your
P910i or against another P910i user.
3. Tap Play to start the game.
To play Chess
Chess
1. Select the piece you want to move.
The square where it is standing will now be marked with a
triangle.
You can play Chess against the P910i, or against another P910i
user via SMS.
2. Select the square to which you want to move the piece and
the piece will move to it.
Please read the help texts for detailed information on how to set
up and play Chess.
Closing the flip closes the game temporarily and saves the
session status. Your opponent will be sent an end-of-game text
message.
To start a new game
1. Select Chess > New game to initiate a game.
2. Enter details as desired in the New game dialog. You can
return to these details later.
– Name – Give the game a name so you can return to it later
if you have to interrupt it.
– Notes – Write a note about the game.
– You play – Choose to play white or black.
– Against – Select the level of your opponent.
Solitaire
Solitaire is a card game played with a standard deck of 52 cards
and up to 4 Jokers.
The purpose of Solitaire is to remove all the cards from the piles
to the layout card while scoring as many points as possible.
Games
85
Points are awarded for playing pile cards and bonus points are
awarded for unbroken, ascending or descending runs of four or
more rank cards.
When you cannot play any more cards and cards still remain in
the piles, the game is over. If all the pile cards are removed,
bonus points are awarded and the hand is won. You are then
challenged to play a Higher/Lower game to acquire more bonus
points. After the challenge, the game continues and a new hand
is dealt with one less Joker.
Rules
When the game starts, 35 cards are dealt from the deck into
7 piles of 5 cards. A further card is then dealt face up from the
layout card.
• Cards can only be played from the bottom of the piles.
• To play a pile card it must have a face value of one more or
one less than the layout card.
• Aces are low and may not be played onto kings. Jokers can
be played onto any card and any card can be played onto a
joker.
Play Solitaire
Solitaire is only available with the flip open.
1. Select the icon for Solitaire.
86
Games
The game will either start with a new game or with the layout
for an earlier, interrupted game. (the game data is saved on
return to desktop, when the flip is closed or when the battery
is low).
2. Select the card you want to move and it will be highlighted.
3. Select the card to which you would like to move the
highlighted card.
To restart the game during a game
Select Solitaire > New game.
To undo/redo a move
Select Edit > Undo move / Redo move.
BUSINESS
Messages
With
Messages you can create, send, and receive different
types of messages:
SMS (Short Message Service) messages are text
messages sent and received via the network operator's
message center. When a text message has pictures,
sounds, melodies and animations inserted, it becomes
an EMS (Enhanced Message Service).
MMS (Multimedia Message Service) messages.
A multimedia message can contain text, graphics,
animations, photographic images, audio clips and ring
melodies.
Email messages. Your P910i mail client supports POP3
and IMAP4 mail servers, MIME attachments and
SMTP for sending mail.
You also use Messages to receive:
• Area Information messages.These are text messages
broadcast to all subscribers in a network area, for example
local road reports or local taxi phone numbers. (Area
Information services are not available from all operators).
• BIO (Bearer Independent Object) messages. There are
different types of messages:
– Setup (email, Internet, WAP accounts).
– Email notifications.
– Files for exchanging electronic business cards (vCard)
and calendar information (vCal).
• Auto setup files for OTA (Over The Air) configuration.
• Beamed messages. These are files received via infrared or
Bluetooth wireless technology.
The different types of messages are handled by separate
messaging accounts. Select
Control panel > Connections >
Messaging accounts to see the details of the messaging accounts
on your P910i.
You can have any number of email accounts - a typical
configuration will be one business and one personal account.
When you set up a synchronization with your PC, an account for
synchronized email is automatically created on your P910i.
With the flip closed, text and multimedia messages can be sent
and received using the Jog Dial and the keypad. More advanced
tasks are, however, best handled with the flip open.
Before using Messages
Before you can send and receive any messages (except for SMS)
you need to set up the necessary accounts.
Messages
87
A simple way of setting up an Internet, email, or MMS account
is to ask your service provider to send you a message that
contains the required information to create an account
automatically on your P910i. You can also use the Web phone
setup-message generator on www.SonyEricsson.com. Received
auto-setup messages are stored in the Auto setup inbox.
See ‘Getting started with Internet and Messages’ on page 169.
To save an email message to Outbox
1. After composing your message, select Send.
2. Select Save to outbox.
Messages that you send from an email synchronization account
are always saved to Outbox and sent from your PC after your
next synchronization.
Draft
Folders in Messages
Messaging accounts can have the following folders: Inbox,
Outbox, Draft, Sent, and folders you can create yourself, local
folders. You can also subscribe to folders based on a server
(remote folders), if you have selected IMAP for your email
account.
Draft contains
messages that are not ready to be sent.
To store a new message in Draft
Create the message and exit without selecting Send.
To move a message from Outbox to Draft
Open the Outbox message list, select the message, and select
Message > Move to draft.
Inbox
Inbox contains received messages. You can reply to, forward,
and delete messages, but not edit them.
Sent
Outbox
Tip Regularly delete old messages from your Sent folder,
especially those with attachments, to clear storage space.
Outbox contains messages that are ready to be sent. If you are
creating several messages, and not using GPRS, you can reduce
connection time by saving them to Outbox and then connect and
send them all at the same time.
88
Messages
Sent contains messages you have sent from your P910i.
Local folders
command to download messages from the folders you have
subscribed to.
To create a new folder
1. From the folder menu, select Edit folders.
2. Tap Add.
The accounts in Messages
3. Name the folder.
When you open Messages, a list of your accounts appears.
4. Tap Done.
The top items in the list, Create SMS, and Create MMS, are
shortcuts for directly creating new messages.
Remote folders
An asterisk next to an account indicates that a message has
arrived since you last opened the accounts inbox.
If you have selected connection type IMAP for your email
account, you can subscribe to remote folders on your email
server. (To select connection type, see “Email account basic tab
settings” on page 158.) By default you subscribe to an Inbox
folder.
Note If you change connection type, your Inbox will be emptied.
Use the Get&send command to download your messages again.
See “Get and send” on page 98.
To subscribe to a new remote folder
1. From the folder menu, select Subscribe.
2. Select the check box for the folders you wish to subscribe to.
3. Tap Done.
Handling text messages
A text message is sent via SMS (Short Message Service). It can
contain up to 160 characters (70 characters if you use non-Latin
characters). If you create a longer message it will be sent as two
(or more) separate messages (concatenated), but will usually be
received as one message. If you add pictures, sounds and other
items to your message it becomes an EMS message.
Text messages can be sent to one or more people (not more than
thirty, we recommend), and you can request a delivery report
when your text messages have been delivered to the recipients.
The delivery report arrives on your P910i as a text message.
The new folders are shown in the folder list. Your subscribed
folders will be shown in a flat structure, that is, subfolders will
be shown on the same level as main folders. Use the Get&send
Messages
89
If you leave the message before sending, it will automatically be
stored in the Draft folder (unless you edit a message which was
already located in Outbox).
Tip To enter several addresses manually (without using
Contacts) in a text message, multimedia message or in an email:
enter a comma between each address.
• Tap
to insert a sound. The sounds last used appear.
– Tap More to get more sounds to use.
• Tap
• Tap
to write bold text.
to change the size of the text you write.
To format the text in the message using EMS features
To write and send a text message
1. Highlight the text you want to format.
Messages select Create SMS. (You can also select SMS >
1. In
tap Message > New.)
2. Tap Edit > Format text.
2. Enter the recipient’s number or select To and select recipient
or recipients from your contact list and select Done.
4. Tap Style tab to check the character style check boxes: bold,
italic, underline, or strike through.
3. Write your message.
5. Select Done.
4. Go to the address tab
delivery report or not.
and specify whether you want a
5. Tap Send.
To add an EMS item to your text message
Use the icons at the bottom of the screen to select the type of
item you wish to add.
3. Tap General tab to change the Alignment and Font.
You can also use the icons
and
described above.
To save a received EMS item
1. Tap the item.
2. Select Edit > Save object.
to insert one of the smilies that appear.
Handling multimedia messages
• Tap
to insert a picture or an animation. The pictures and
animations last used appear.
– Tap More to get more pictures and animations to use.
– Tap New to draw a picture of your own.
MMS (Multimedia Messaging Service) messages can include
pictures, animations and sound, organized like a slide
presentation with time-based control of the playback.
Composing a multimedia message is like building a small slide
• Tap
90
Messages
presentation. A typical page will consist of a picture, some text
and sound. Refer to Technical data, section ‘MMS’ on page 197
for supported file types that you can add.
You can take a picture with the CommuniCorder and send it as a
multimedia message using the Send as command from Pictures.
Multimedia messages can be sent to a mobile phone or an email
account.
How a recipient receives an MMS you send depends on your
MMS service and how the receiving phone complies to MMS
specifications. Phones can, for example, only receive pictures of
a maximum size, video and sound.
Your P910i can help you to create messages which conform to
standard and therefore are more likely to reach recipients. Set
the Content alert to warn or restrict you. See “MMS Advanced
settings tabs” on page 161.
Tip To enter several addresses manually (without using
Contacts) in a text message, multimedia message or in an email:
enter a comma between each address.
Incoming multimedia messages
To play a received multimedia message
• Open the MMS inbox and select the new message.
The first time a multimedia message is opened it plays
automatically. The next time you open the message you can
play it by pressing the Play Button (flip open) or by choosing
Play from the menu (flip closed).
To forward an MMS
1. Open the message.
2. From the Message menu, select Forward.
3. On the
address tab, select To and enter the recipient’s
mobile number or email address.
4. Select Send.
To store a received MMS item, for example a picture
1. Open the message.
2. Select the picture you want to save.
3. Select Save picture or select Edit > Save picture.
4. Select the storage location.
5. Select Save.
You can store items both internally and externally. You can also
copy them between the internal memory and the Memory Stick.
See ‘Folders’ on page 28.
Creating and sending multimedia messages
You can create multimedia messages in the P910i but you can
also use the MMS editor on the Multimedia for P910i CD.
Messages
91
To create a new multimedia message
1. In
Messages select Create MMS. (You can also select MMS >
Message > New. or open an existing message and select
Message > New ).
2. From the Select template dialog, tap the name of the template
you want and tap Select. The Blank template will open a blank
message.
3. The first page of the new
message is now displayed.
Select an item from the
menu that appears.
Tap
to open the menu
if it does not open
automatically. If you
select Add scribble the
Image editor presents a
white background onto
which manual graphics
can be added. The Image
Editor includes controls
for pen, crop, color, scale,
rotate and pen width.
8. Select Edit > Page order to change the page order in the
message.
1. Select the
Message
Chat Edit Edit
Draft
1/1
CommuniCorder
Add video
Add picture
Add scribble
Add text
Add sound
Add recording
address tab.
2. Select To and select the recipient from Contacts.
or:
Select the line beside To and enter the recipient’s mobile
number or email address.
To insert an attachment
1. While creating your multimedia message, select the
attachment tab, select Add.
2. Select the type of attachment you want to add.
3. Select the attachment.
Paste
Send
5. Tap
if you want to change the time this page should be
shown. Default time is 5 seconds.
Messages
7. Tap
to add a new page to the multimedia message in
which you can insert items.
To enter the recipient’s phone number
4. Tap
again to add text,
audio or voice to the page.
Tap the page to return to it.
92
6. Select Edit > Background color to give the message a
background color.
To send the multimedia message
Tap Send.
Preferences to a multimedia message
Select Edit > Preferences to set the preferences to a multimedia
message. The following settings are available:
• Hide number – Prevent your phone number from being
displayed in the recipient’s phone. (Subscription dependent).
• Read report – Request a receipt when the recipient has opened
your message.
• Delivery report – Request a receipt when the message has been
delivered to the recipient’s phone.
Editing multimedia messages
Here you can see the first
page with an inserted
picture.
Message
Chat Edit Edit
1/1
Draft
10kb
To delete, replace or edit an
inserted item
Select the inserted item and
choose an action.
While editing an image you
can add scribble, resize, crop
or rotate your image or add
text. To undo your changes,
select Edit > Undo all.
Note If you have accepted
changes by selecting Done,
you will not be able to undo
them.
To edit item time
For each item in a page, it is possible to set the time when the
item appears and for how long it is displayed or played.
1. Select the item so it is highlighted
2. Select Edit time
3. Set the Start, which is the number of seconds before the item
appears after the start of the page. The default is 0, meaning
show or play immediately.
4. The default Duration is for the item to continue for the
remaining duration of the page. To change this, un-check
Page time and change the duration to the required value in
seconds. Start time + duration cannot exceed total page time.
If you have added video or sound and the page time is longer
than the video or sound play time, the video or sound will
only play once (it will not be repeated in leftover page time).
You can also tap
, or select Edit > Page time to see the time
settings for all items in a page. Tap the time bar to adjust the
time settings for each item.
Edit picture
Edit time
Delete
Copy
To add or delete a template
Send
• To make a template from a message, select Save as template,
give the template a name, and tap Done.
• To delete a template, tap the name of the template you want
in the Select template dialog and tap Delete.
Messages
93
To set the download method for receiving multimedia
messages, manual or automatic
To enter addresses from Contacts when writing an email
• In
Control panel, select Connections > Messaging accounts >
MMS > Automatic.
2. In the Select contact dialog select the check box for each entry
you want to send the email to.
– Off means that only headers will be downloaded and can
be viewed.
– Home only means the same as for On below, but is only
valid in your home country.
– On means that the multimedia message is downloaded and
can be read like any other message. There is no
intermediate step.
3. Select Done.
1. Select To:
Tip To enter several addresses manually (without using
Contacts) in a text message, multimedia message or in an email:
enter a comma between each address.
Sending email
To send an email message
Select Send > Send immediately.
Handling email
Writing email
To write a new email
Select an email account and select Message > New.
If you leave the message before sending, it will automatically be
stored in the Draft folder (unless you edit a message which was
already located in Outbox).
To mark an email as urgent
On the
address tab, select High in the Priority list.
94
Messages
If your P910i is connected to the Internet when you send an
email, it will be sent immediately and your P910i will remain
connected to the Internet. If not, your P910i will connect to the
Internet and then send the email.
Tip If you are creating several messages, and not using GPRS,
you can reduce connection time by saving them to Outbox and
then connect and send them all at the same time.
To save an email message and send it later
Select Send > Save to outbox.
To move an email message from Outbox to Draft
In your list of Outbox messages, tap to the left of the email (a tick
appears), and select Message > Move to draft.
If you leave the message before sending, it will automatically be
stored in the Draft folder (unless it was created from Outbox).
Video,
Tasks,
Viewer,
Jotter,
Internet,
Calendar,
Contacts,
Pictures.
Sound recorder, and
To attach a Calendar entry to an email message
1. Open the entry in Calendar and select Calendar > Send As.
2. Select Email > Done.
Setting email preferences
Select Edit > Preferences to open the preferences dialogue.
– Email account – The email account you are currently using.
– Always attach your card – The entry in Contacts specified as
My card will be attached to your email messages.
– Always reply with history – The contents of the email you
replay to is included in your new email.
– Signature – The signature you write here ends your email
messages.
Adding attachments
To attach an entry to an email message
1. On the
attachment tab, select Add.
2. Select the type of attachment you want to add, and select the
item.
3. Complete the email message and select Send.
To attach a Contact to an email message
1. Open the contact details for the contact you wish to send and
select Contacts > Send as.
2. Select Email > Done.
3. Complete the email message and select Send.
Receiving email
Email must be fetched from the email server on the Internet or at
your office. This can be done manually using the Get & send
function or automatically by requesting the P910i to check for
new email at certain times.
When you forward an email, you can choose whether or not to
forward the attachment. Large attachments increase the size of
an email and consequently the connection time needed to send
it.
‘Send as’ email
You can send the entry you are viewing as an attachment to a
Music player,
new email from the following applications:
Messages
95
Receiving attachments
Any attachments to an email message are displayed on the
tab. The icon next to an attachment in the list identifies the
type of attachment.
To specify a size limit for email, above which you only receive
a header
To view an attachment you need a viewer for that type of
file.Your P910i comes with pre-installed viewers for Microsoft
Word, Excel, and Adobe Acrobat (PDF) files.
2. Select Inbox.
1. Select
Control panel > Connections > Messaging accounts >
Email (select the email account) > Edit.
3. Select an option from the Download list.
In your list of messages, headers are denoted by
To save an attachment, for example a picture
1. Open the email message and select the
tab.
2. Tap the attachment, which opens the Pictures application.
3. Select Pictures > Save.
4. Select the location where you want to store the message.
To download the full message
1. In your list of messages, select the header.
2. The dialog Download, Yes/No appears.
3. Select Yes.
5. Select Save.
To download a series of messages
You can store items both internally and externally. You can also
copy them between the internal memory and the Memory Stick.
See ‘Folders’ on page 28.
1. In your list of messages, select the check box to the left of
each entry (a tick appears).
Downloading
You can choose not to download large messages and receive just
a header instead. A header contains the subject line, sender’s
details, and date, but not the full message.
Deleting messages
You can delete messages both locally and in your email server.
2. Select Get & Send.
To delete a message locally
1. In your list of messages, select the check box to the left of the
message header.
2. Select Message > Local delete.
96
Messages
3. Select Yes.
The message body and attachments are deleted but the heading
remains. You can download the message again later.
To delete a message both locally and in your email server
1. In your list of messages, select the check box to the left of the
message header.
2. Select Message > Delete message.
3. Select Yes.
The message is deleted in your P910i and in your email server
and will no longer be visible in your message list.
Downloading email automatically
You can schedule your email messages to be downloaded
automatically at certain times.
To download your email automatically
1. In Control Panel, select Connections > Messaging accounts >
Email.
2. Select the required email account and select Edit.
is not connected before sending an email, it will connect and
send the message, and then disconnect.
Note You can send text messages while connected to the
Internet. If your connection is CSD or HSCSD it must be
disconnected before you can make or receive a phone call.
If your connection is GPRS, it may be suspended to enable a
phone call to be made or received. You may need to repeat the
data activity (Web page fetch, get email) after the call has
ended.
If your P910i cannot connect to the email account, automatic
download will fail, and
will be displayed next to the email
account.
A scheduled download will fail if your P910i is engaged in a
voice call. It may fail if it is connected to another ISP, that is,
through a different Internet account than specified for the email
account.
If email messages are not downloaded because a scheduled
download fails, they will be downloaded during the next
successful connection.
3. Select Inbox > Schedule.
4. Set time or interval for scheduled download and select Done.
Disconnecting and connecting
If your P910i is already connected to the Internet when you send
an email, it will remain connected after sending it. If your P910i
Messages
97
More about messaging
Finding messages
In both the list of accounts and list of messages, Find searches
through the subject lines, senders’ details, the text of the
message, and dates.
In an open message, Find searches through the text of the
message and highlights the text it finds.
You can only search through email messages that have been
fully downloaded.
Get and send
To get and send messages for one specific account
1. Select
Messages.
2. Select the desired account (MMS or email for example).
3. Select Get&send.
Note If the email account is set up to access the mail server
through a Secure access connection (see ‘Secure tokens’ on
page 166) you must have the flip open when you use Get&send.
If the flip is closed you will see an error message.
Mark read and unread
Use commands on the Edit menu to mark your received
messages read or unread. You can also make P910i show just
unread messages. If you have selected connection type IMAP for
your email account, the read or unread status will be updated for
the messages on the server the next time you use the Get&send
command.
If you have changed the read or unread status for the messages
on the server, for example from your PC, the read and unread
status will change accordingly on your P910i.
To select connection type, see “Email account basic tab
settings” on page 158.
Note If you change connection type, your Inbox will be emptied.
Use the Get&send command to download your messages again.
To get and send messages for all your accounts
1. Select
Messages.
2. Select Message > Get&send. Any unsent messages in your
Outbox will now be sent and new messages not yet
downloaded will be downloaded to your P910i.
98
Messages
Full screen view
Use the command Edit > Full screen to view your email messages
and MMS in full screen. You can also edit email in full screen.
Set your P910i to open email messages in full screen view by
default, see “Email account Inbox tab settings” on page 159,
and to play received MMS in full screen by default, see “MMS
Advanced settings tabs” on page 161.
3. The dialog Do you want to disconnect from Internet?, Yes/No
appears.
4. Select Yes.
Saving contact details
When you receive a message, you can save the contact details of
the person who sent you the message.
If your service provider or network is
unavailable
To save the sender’s details
On the message’s
address tab, select From.
Sometimes a message cannot be sent because your P910i cannot
connect to a network. Please check that the Messaging Account
and Internet Account information in the Control Panel is correct.
Note If you save an address from an email message
synchronized from your company PC, the corporate version of
the address, rather than the full Internet email address, will be
saved to Contacts. If the corporate version of the address is not
an Internet address (an X.400 address, or just the sender's
name, for example), you can use it to send email from your
synchronized account, but you cannot use it in email that you
send directly from your P910i.
Connecting and disconnecting from the
Internet
To disconnect from the Internet
1. Select the connection icon (HSCSD/CSD
in the status bar.
2. Select Disconnect from the pop-up menu
or GPRS
If you have both GPRS and Dial-Up Internet accounts, try
sending the email message using an account of the other type.
GPRS Internet accounts use the GPRS network and Dial-Up
Internet accounts use the GSM network.
Synchronized email
When you set up a synchronization with your PC, an account for
synchronized email messages is automatically created on your
P910i and indicated by
. You can have more than one
account for synchronized email, but only one per PC. If you
send an email as PC mail, the mail will be sent via the PC when
you have synchronized your P910i with the PC.
If you set up a POP or IMAP account which accesses the same
mail server, the two accounts will contain the same messages.
Note that there is no connection between the accounts; the
copies in each account are separate.
Messages
99
Area information
Area information messages are text messages that are sent to all
subscribers in a certain network area, for example, a local traffic
report. When you receive an area information message, the
message automatically appears on the screen. When you dismiss
the information, it will be stored in the Area info Inbox until it is
replaced by a new message received on the same channel.
Please consult your service provider for more information about
the availability of area information services and area
information channel numbering. See ‘‘Area tab’ on page 162 for
more information.
100
Messages
Contacts
Contacts is like an address book, in which you can store names,
phone numbers, email addresses and other useful information,
including photos.
The information stored in the SIM is also accessible. SIM
entries can be copied to Contacts and Contacts entries can be
copied to the SIM. Some SIM cards have Information numbers
and Service numbers stored on the SIM card by the operator.
These numbers are useful for service and information, and are
accessible from the SIM within Contacts.
You can synchronize the contents in Contacts with one of the
PIM applications in your PC supported by the P910i. See
‘Synchronization and backup’ on page 138.
Using Contacts with the flip
closed
With the flip closed, you can make calls and send text or
multimedia messages.
Contacts has two views when the flip is closed:
List view
An alphabetical list of contacts. The list view is the
starting point for finding a contact.
Detail view
The details for a contact.
Menus
In both list view and detail view, you can use
to access
some of the P910i’s contact functions. The options will vary
depending on the situation.
Menu options in list view
• SIM – Display the contacts of the SIM card.
• Send my card – Send your owner card (See ‘Making an owner
card’ on page 107) via infrared or Bluetooth wireless
technology.
• Find – Search for a specific contact.
• Undo delete – Restore the last deleted contact. Will appear
only if there is something to undo.
• # Applications – Access the application list view.
Menu options in detail view
Menu options in detail view: (availability depends on the type of
contact detail, for example mobile number, that is highlighted.)
• Send SMS – Send a multimedia message to the active contact
• Send MMS – Send a text message to the active contact.
• Call – Call the active contact.
Contacts
101
• Send as – Send the active contact using infrared or Bluetooth
wireless technology.
3. Select a contact and press the Jog Dial or press
the detail view for a contact.
• Delete contact – Delete the active contact.
To return to the list view, press
• # Applications – Will access the application list view.
Menu options in SIM
Note To make a call to a contact in the SIM, select SIM from the
options menu. If there are service numbers or information
numbers stored on the SIM card, you can also access them.
• View all – Switch to Contacts list.
• Service numbers – Display the service numbers on the SIM
card. This option is only displayed if there are service
numbers stored on the SIM card.
To make a call
1. Select a phone number.
• Information numbers – As for service numbers above.
2. Press the Jog Dial or press
or
• Find – Search for a specific contact.
1. Select a phone number.
• # Applications – Will access the application list view.
2. Select Call from the options menu.
Selecting a contact with the flip closed
To send a text message
1. Select a phone number.
To select a contact
1. Select
102
2. Select Send SMS from the options menu.
2. Then either:
– Scroll down to the desired contact.
– Press a number key. The first contact corresponding to the
first letter of the key appears. To search further, continue
to enter the letters with the keys.
– Select Find from the menu and search for the contact.
Contacts
to open
To send a multimedia message
1. Select a phone number.
2. Select Send MMS from the options menu.
To add a contact
You can create a new contact using information from a recently
received voice call or message. See also ‘Add to contacts’ on
page 54.
1. Select Yes when asked to add to contacts.
2. Enter contact name and edit the number, if required.
To delete a contact
1. Select the contact.
2. Select Delete contact from the options menu.
• To restore a deleted contact, select Undo delete from the
options menu.
Using Contacts with the flip
open
Detail view
Edit view
The details for a contact.
Contact details, displayed in a way that allows you
to add and change the information.
Tabs at the bottom of the list view provide a fast way to locate
information. To highlight the first entry that begins with the first
letter on a tab, select the tab once. To highlight the first entry
that begins with the next letter on the tab, select the tab again,
and again for the third letter on the tab.
abc def ghi jkl mno pqr stu v-z
Making a call with the flip open
To open Contacts
Tap
or select Contacts in the Application launcher
To make a call
1. If required, change folder from the Folders menu.
Open the flip and tap
or select Contacts in the Application
launcher
to open Contacts.
2. Scroll down to the desired contact.
If the contact list is long, first select a tab at the bottom of the
view.
Contacts has three views when the flip is open:
3. Select the contact to display the contact details.
List view
An alphabetical list of contacts. The list view is the
starting point for finding a contact.
4. Depending on what you want to do, make one of the
following choices:
– Select
or
or the phone number to make a call.
– Select
or the email address to send an email.
Contacts
103
– Select
– Select
– Select
or the URL to open a Web page.
to send a multimedia message.
to send a text message.
Using service and information numbers
To call an Information number or Service number on the SIM
card
1. Select SIM in the folders menu.
2. Select Contacts > Information numbers / Service numbers and
select a phone number or select a sub-category and then a
phone number.
3. Select Call.
Creating and editing contacts
You can sort the contacts according to first name, last name or
company. The contact entries can also be filtered by folder, such
as Business or Personal.
To add a field to a contact
1. Select the contact.
2. Select Edit > Edit contact.
3. Select Edit > Add field.
4. Select the field to be added from the drop-down list.
5. Select Add.
To add a DTMF tone sequence
1. Select a field and set it to Phone (h).
Add a new field if necessary.
2. Enter a p and then the tone digits. Enter a p to insert a pause.
It is necessary to start the tone sequence with a p so the
phone recognizes it as a tone sequence.
To send a DTMF tone sequence during a call
1. During a call, open the contact’s detail view.
2. Tap
at the tone sequence.
Read more about DTMF tones in ‘Controlling tone-based
services’ on page 49.
To create a new contact
1. Select Contacts > New.
2. Enter the desired information. When applicable, select from
the drop-down menus.
To add a voice dialing command
Contacts with a voice dialing command are shown in Voice
commands in the folders menu.
1. Select
at the bottom of the screen.
2. Select a number.
104
Contacts
3. Tap the Record button and record a voice command after the
tone.
1. Against Ring Tone, select Find sound from the drop-down
menu.
4. Tap Play to check the quality of the recording.
2. If required, change folder.
• To remove a voice command, select the Del button.
3. Select the required sound.
4. Tap
To add a note to a contact
1. Select
2. Enter the text.
3. If you do not want the note to be included when you send,
beam, or synchronize the contact, select the Private check
box.
To add a photo or other picture to a contact
1. Select the photo view tab
and
to preview the sound.
5. Tap Select to set this sound for the contact.
2. Tap the picture space.
3. If required, change folder.
4. Select the picture to use.
5. Tap the Select button.
• To change a picture, select the picture and select Replace
image.
• To remove a picture, select the picture and select Delete image.
Note The selected ring melody will only be played if the
network provides a CLI (Calling Line Identity) to enable the
contact to be identified, otherwise the Default Melody will be
played.
Note If the ring melody selected for this contact is later deleted
or moved, the Default Melody will be played.
To change the details of a contact
1. Select a contact.
2. Select Edit > Edit contact, or tap the tab.
3. Change the desired information. When applicable, select
from the drop-down menus.
To delete a contact
1. Select the contact.
2. Select Contacts > Delete contact.
To personalize the ring melody for a contact
Contacts with a personalized ring melody are shown in Personal
ring type in the folders menu.
Contacts
105
To create or edit a contact on the SIM card
To search for an entry containing specific text
1. Select SIM from the Folders menu.
1. Select Contacts > Find.
2. Create or edit the contact as described above.
All options are, however, not available for the SIM card
contacts.
2. Enter the text string you wish to search for.
Managing contacts
Note Searching is not case sensitive and you do not have to
enter an entire word to locate a matching entry.
You can use Contacts manager to move contacts between the
folders, send contacts as a Vcard to another device, or to delete
them. You can also send or delete contacts on the SIM card with
the Contacts manager.
Copying contacts to and from the SIM card
See ‘Sending and receiving items’ on page 30 for information
about how to receive contacts from another device.
To move, send or delete a contact
1. Select Contacts > Contacts manager.
2. Select the contacts you want to manage.
(If required, change folder from the Folders menu. Selecting
All will show all the contacts from all the folders except the
SIM. Clicking the Select all check box will select all the
contacts in the current folder.)
3. Select Send / Move / Delete.
4. Follow the instructions, for example, select a folder or a
sending method.
5. Tap Done or Yes to confirm the action.
106
Contacts
3. Select either In all fields or In Names & Company and tap Find.
4. When the search is complete, all results will be displayed.
You can also copy information between the contacts list and the
SIM card.
To copy contacts from the SIM card
1. Select SIM in the folders menu to the right in the menu bar.
2. Select Edit > Copy all to Contacts for copying all SIM entries
or
Tap a SIM entry to open it and select Edit > Copy to Contacts to
copy the selected SIM entry.
To copy contacts to the SIM card
1. Select a contact.
2. Select Edit > Copy to SIM card.
3. If the contact has multiple phone numbers, select the number
to copy.
4. Select Done.
Preferences
Contacts tab
Making an owner card
To sort the contact list and show the preferred phone number
You can create an electronic business card, containing your
contact details, including notes and a photo. You can then send
this card to another device.
2. Select the desired sorting option (first name, last name or
company) and tap Done.
To create your owner card
1. Select Contacts > New and enter your details.
2. Select Contacts > Set as my card.
Tip You can also create an owner card by viewing the detail
view of a contact and selecting the menu option Set as my card.
1. Select Edit > Preferences.
3. If you want a phone number to be shown next to the name in
list view, select Show preferred phone number.
If no preferred number has been set up for the contact, the
first phone number will be used.
4. Select Done.
To change the preferred phone number
To send your owner card
1. Select a contact.
1. Open the list view, and then select Contacts > Send my card.
2. Select Edit > Edit contact.
2. Send the card using Send as.
3. Select Edit > Show in list.
Read more about sending items in ‘Sending and receiving items’
on page 30.
4. Select the number to be shown from the list.
To view or edit your owner card
• Select Contacts > View my card.
5. Tap Done.
Note If no number appears, ensure that Show preferred phone
checked in preferences.
number is
Contacts
107
Calendar
The Calendar function helps you to keep track of appointments
and events, and you can also set reminder alarms for the entries.
A reminder is denoted by a
Creating calendar entries
Different views
1. Select Calendar > New and enter a short description of the
entry. This is the description you see in the calendar.
You can see your Calendar entries in three views with the flip
open: Day, Week and Month. With the flip closed you will see
the Day view.
2. Tap Unfiled (the folder menu) in the menu bar and select a
folder to store the entry in.
To change view in flip open
• Tap
to display the Day view.
• Tap
to display the Week view.
• Tap
to display the Month view.
• Tap
to navigate to the present day in the displayed view.
If you tap an entry in week view, the subject and time for that
entry are shown.
To navigate backwards or forwards in the current view
Tap the left and right arrows in the button bar at the bottom of
the screen. You can also rotate the Jog Dial.
To navigate to a specific date in the current view
Tap the day, week or month heading at the top of the display to
show a calendar pop-up in which you can select a specific date.
108
Calendar
To create a new calendar entry
3. Continue to enter information for the items on the detail
page.
– Type - Specify if the entry is an appointment, reminder or
all day event.
– Date - Select the date to get a calendar where you can set a
date for the entry.
– Time - Set start and end time for the entry.
– Location - Specify a location or select a location you have
used before.
– Alarm - Select the check box if you want your P910i to
alert you about the entry with a sound. Select the time and
date that appears for your settings.
– Repeat - Specify if you want to repeat the entry or not.
Read more about this below.
– Private - Select the check box to prevent the item from
being viewed by others than yourself if you synchronize
your calendar with, for example, your PC.
Managing calendar entries
To find a certain entry
4. Select the note page tab to write a note for this entry.
1. Select Calendar > Find.
5. Select
2. Enter a search word in the menu that appears.
to save and close the entry.
You should delete old entries regularly to release memory.
To create re-occurring entries
1. When the entry is open, select Repeat.
– Set repeating to Daily, Weekly, Monthly by date, Monthly by
day, Yearly by date or Yearly by day.
– Interval - Specify how often the event will happen, for
example, by selecting Weekly and Interval 2 means that the
event will go off every two weeks on the specified day.
– Forever/Until - Set the time limit for the alarm or select
forever.
2. Select days - Weekly repeated events can be set to occur twice
or more in a week. For example, eating lunch with a friend
Tuesday and Friday every week.
3. Select where to search (Everywhere, Future, Past).
4. Select Find. A result list is then displayed.
5. Select an entry on the result list to open it.
To delete an entry
Open the entry and select Calendar > Delete entry.
A deleted entry may be restored with Edit > Undo delete.
To delete all entries in a period of time
1. Select Calendar > Remove entries.
2. Select the time period and select Done. All entries from that
time period are deleted from the Calendar.
Note Repeated entries will not be deleted.
Note You cannot repeat All Day Events
To copy, cut or paste an entry
To edit an entry
1. Open the entry.
1. Open the entry by tapping it in the calendar.
2. Select Edit > Copy entry/ Cut entry.
2. Make the changes in accordance with the instructions above.
3. Go to the day where you want to place the entry.
4. Select Paste entry.
Calendar
109
To move a Calendar item to Tasks
1. Open the entry and select Calendar > Move to Tasks.
2. The entry is moved, not copied.
If you move an entry with an alarm, the alarm will also sound in
Tasks.
To cut or copy Calendar entries to the Tasks application
1. Open the entry and select Edit > Cut entry or Copy entry.
2. Open Tasks.
3. Select Edit > Paste entry.
Sending and receiving calendar
entries
You can send and receive calendar entries using Send as. See
‘Sending and receiving items’ on page 30.
Preferences
You can customize the calendar views and alarm settings to suit
your own needs.
To customize the calendar view, General tab
1. Select Edit > Preferences.
110
Calendar
2. Select the General tab, and fill in the required details.
To customize the alarm settings
1. Select Edit > Preferences.
2. Select the Alarm tab.
Now, you can change the Alarm precedes event by setting - the
length of time before an entry that the alarm goes off.
To assign colors to your entries using the folders
1. In Calendar, select the folders menu to the right in the menu
bar and select Edit folders.
2. Select a folder and select Edit or create a new folder by
selecting Add.
3. Select the color box and select color for that folder and select
Done.
Entries in a folder with a specific color appear in that color in
Day and Week views (but not in Month view) so that you can
see the pattern of events in your diary. Reminders appear as
whatever the folder color.
Saving changes
If you leave Calendar while editing an entry, your changes will
be saved automatically.
Tasks
With the Tasks function you can make a list of things you need
to do. The folders help you to separate different types of
activities.
You can move entries between Tasks and the Calendar, which is
useful when you come to schedule a Tasks entry. You can also
send an entry via text message, infrared, Bluetooth wireless
technology, multimedia message or email.
Creating task entries
The Tasks list shows a short description of the task. Select a task
to see its full information.
– Completed – Select the check box when the task is
done.This can also be done directly in the Tasks list.
– Priority – Set a priority for the task. You can sort the tasks
by priority.
– Due date – Select the check box to set a deadline for the
task. Select the date that appears to get a calendar where
you can set a due date.
– Alarm – Select the check box if you want your P910i to
alert you about the task. Select the time and date that
appears for your settings.
– Private – Select the check box to prevent the task from
being visible by others, when synchronized with shared
calendars or tasks in other devices, for example your PC.
A task entry consists of two pages. One detail page where you
set the properties for the task, and one page where you can add
notes.
4. Select the note page tab to write a note for this entry.
To create a new task entry
Note Delete will delete the whole task entry.
1. Select Tasks > New and enter a short description of the task.
This is the description you see in the task list.
To edit an entry
2. Select Unfiled (the folder menu) in the menu bar and select a
folder to store the task in.
2. Make the changes according to the instructions above.
5. Select
to save and close the task.
1. Open the entry by tapping it in the Tasks list.
3. Continue to enter information for the items on the detail
page.
Tasks
111
Managing task entries
To restore a deleted entry
Select Edit > Undo delete.
To open an existing entry
Select the entry in the Tasks list.
To delete all completed entries
In your Tasks list, select Tasks > Delete completed.
To mark an entry as completed
Select the check box to the left of the entry in the Tasks list.
Note When you delete All Completed Entries, they are deleted
permanently and cannot be restored.
To sort the entries
Select Edit > Sort on priority or Sort on date.
Moving task entries
To find a certain entry
1. Select Tasks > Find.
2. Enter a search word.
3. Select in which folder to search or use the default value
All folders.
4. Select Find. A result list is then displayed.
5. Select an entry on the result list to open it.
To move an entry to the Calendar
Open the entry and select Tasks > Move to Calendar. The entry is
moved, not copied.
To copy a task entry to Calendar
1. Open the entry and select Edit > Copy entry.
2. Open Calendar.
3. Enter the day you wish the task to appear.
To make a copy of an entry or paste an entry
4. Select Edit > Paste entry in Calendar.
1. Open a task and select Edit > Copy entry.
Note If you move or copy an entry to the Calendar, it will lose
the priority it was assigned in Tasks.
2. In list view, select Edit > Paste entry.
To delete an entry
Open the entry in the task list and then select Delete.
112
Tasks
If you do not set a due date for the task entry, the current date
will be used for the new Calendar entry. If you move or copy an
entry with an alarm, the alarm will also be moved to the
Calendar.
Sending and receiving task
entries
You can send and receive task entries using Send as. See
‘Sending and receiving items’ on page 30.
Preferences
Select Edit > Preferences to change the settings. The following
settings are available.
– Display due dates – Select whether or not to display them in
the Tasks list.
– Display completed – Select whether or not to display them
in the Tasks list. This will not delete the completed tasks.
Tasks
113
Jotter
The Jotter works as a notebook where you can write notes and
draw pictures. The folders help you to separate different types of
notes.
To edit a note while working with it
A Jotter entry consists of two pages. One text page and one
drawing page. With the flip closed, you can read and edit your
notes, but you cannot view or edit pictures.
• For sketches, select Edit > Undo.
This choice removes your last pen stroke. If you change your
mind, select Edit > Redo.
When opening Jotter you will see a list of entered notes, with the
first words of each text note. Select a note to see its full
information or edit it.
• For text, select Edit > Revert.
The text returns to its original state. All changes are lost.
To create a new note from text or sketches copied from another
application
Open the list of notes and select Edit > Paste.
Creating and editing notes
Note If you paste a sketch over an existing sketch, the existing
sketch will be deleted.
To create a new note
Create a note with the flip closed (text only)
1. Open Jotter and select Jotter >New.
The new note will automatically start as a text note. Select
to create a bullet list.
A to get bold text and
2. If you have previous notes stored, these will now be listed.
Use the Jog Dial to select a previous note in order to open it.
2. Select Unfiled (the folder menu) in the menu bar and select a
folder to store the jotter in.
3. Press
if you want to create a new note. Select New.
Insert your text by using the keypad.
3. Select the drawing page tab to draw a sketch for this note.
4. Select
114
Jotter
to save and close the note.
1. Select Applications >Jotter with the flip closed.
Managing notes
Edit a note with the flip closed
1. Select Applications >Jotter with the flip closed.
2. Use the Jog Dial to select a previous note in order to open it.
To delete a note
3. Press
1. Select the note in the notes list.
The note opens.
. Select Edit. Insert your text using the keypad.
2. Select Jotter > Delete note.
Drawing pictures
You can draw with different
nib widths and colors. The
main window is the ‘paper’
where you can draw with
your stylus in the same way
as you draw with an ordinary
pen.
Select
Sending and receiving notes
Jotter
Edit
Unfiled
You can send and receive notes using Send as. See ‘Sending and
receiving items’ on page 30.
Note Selecting Send as SMS will send the text only.
to change color.
Select
to change the
virtual nib.
Select
to activate the
eraser. Tap the eraser again to
re-activate the pen.
All jotter files (both text and
drawings) are automatically
stored in the P910i. The list
view will be presented to you as soon as you start the Jotter
application.
Jotter
115
TOOLS
Sound recorder
In Sound recorder you can record and listen to your own sound
recordings. You can also send your recordings to other devices
via Bluetooth wireless technology, infrared communication,
email or multimedia message, and use a sound recording as a
ring signal.
Each memo is identified by the date and time it was recorded
and by its position in the list of sound recordings.
3. Select
to finish the recording.
Key functions
Select...
To...
start recording a sound.
listen to the current sound recording.
stop the current sound recording.
Making sound recordings
go to the previous sound recording in the list.
go to the next sound recording in the list.
To record and save a sound recording
1. Select
> New.
A new sound recording is created.
To delete a sound recording
2. Select
and start recording after the beep.
2. Select Delete > Yes.
3. Select
to finish the recording.
The new sound recording is automatically saved in the list of
sound recordings with the current date and time.
To append to the end of a previous sound recording
1. Select the required recording.
2. Select
116
and start recording after the beep.
Sound recorder
1. Select a sound recording you want to delete.
Using sound recordings as ring
signals
You can set a sound recording as a ring signal.Your sound
recordings will appear in the list of sounds that can be selected
as ring signals. They will take the form voicenote and a number,
for example voicenote1470.
To set a sound recording as a ring signal see ‘Sounds and alerts’
on page 147.
Sending sound recordings
You can send Sound recorder recordings via Bluetooth wireless
technology, infrared communication, email or as a multimedia
message.
To send a sound recording
1. Select Sound recorder > Send as.
2. Select how you want to send the sound recording. See ‘To
send an item using Send as’ on page 30 for more
information.
Note All other sound media on your P910i is handled via the
Music player application. You can send sound items from
Music player and all received sound items are played using Music
player.
Sound recorder
117
Calculator
The Calculator is a standard 12-digit calculator. You can add,
subtract, multiply, divide, calculate square roots and
percentages. It also has a memory function.
Key functions
mr
Tap once to retrieve a value from the memory and enter it
into the screen.
Tap twice to clear the memory.
m+
Tap once to store an entered value in the memory.
If you have already entered a value in the memory, tap once
to add the value on the screen to the value in the memory.
m-
Tap once to subtract the entered value from the value in the
memory. The memory is adjusted but not displayed.
To use the calculator
1. Select
2. Enter the calculations by tapping the digits.
All calculations, except percentage calculations, are performed
in the order they are entered, for example: 5+5x5=50, not 30.
Tap once to delete the last digit you entered.
Percentage calculations are performed backwards. To calculate,
for example, 10% of 50, enter 50x10%. The result is displayed
when you tap the %-key.
Tap once to reset the screen to 0.
You can copy and paste values to and from other applications by
selecting Calculator > Copy or Paste.
Values stored in the memory are retained while using other
applications.
118
Calculator
Time
The time and date are always displayed on the flip closed
standby screen. You can customize the display of times and
dates throughout your P910i. You can set your current location
and another location of your choice. It is also possible to set
three different alarms.
Use the am/pm box to switch between am and pm. (This is
only possible if you use the 12-hour time format.) Confirm
by tapping outside the time picker.
6. Select Done.
Format
Setting time and date
To set the current time and date
1. Select
2. Tap the clock, or select Time > Set time & date, to view the
current time and date settings.
3. Tap the Date box, then use the arrows to set the current year
and month. Then select the current day.
4. Tap Summertime, then select the check box next to the zone
that currently has summer time and tap Done. This is only
required if you are currently in a country/region with summer
time.
5. Tap the time box, then tap the upper half of the hour or
minute box to increase the number displayed, or the lower
half to decrease the number.
You can specify how you want the time and date to be displayed
on the screen, and if you want to use the 12- or 24-hour time
format.
To set the time and date display format
1. Select
2. Tap the clock, or select Time > Set time & date, to view the
current time and date settings.
3. Select Format.
4. Tap the Date Format box and choose a format.
5. Tap the Date Separator box and choose a separator.
6. Select a Time format.
7. Tap the Time separator box and choose a separator.
8. Select Done.
Time
119
Specifying workdays
You can specify what days you work, if, for example, you want
to set an alarm that sounds only on workdays. You can also
specify the first day of your week to customize the display of
both Week and Month views in Calendar.
To specify your workdays
1. Select
To set the locations
1. Select
2. Tap Time > Set location.
3. Tap the Current Country/Region box and select the country/
region you are in at that moment.
4. Tap the Current City box and select the city you are in at that
moment. If the city you are in is not listed, select the city
closest to you.
2. Tap the clock, or select Time > Set time & date, to view the
current time and date settings.
5. Tap the Other Country/Region box and choose a country/
region.
3. Select Workdays.
6. Tap the Other City box and choose a city.
4. Select the check boxes next to the days you normally work.
7. Tap Done.
5. Select First day of week and choose a day.
6. Tap Done.
Setting locations
Specify the country/region and city you are currently in. The
city you select will be displayed next to the clock in Time.
If you are away from home, for example traveling in another
country/region, it can be useful to know what the time is in your
home country/region as well as the country/region you are in.
The city you select as Other City will be displayed below the
clock in Time.
120
Time
Setting number formats
You can choose how you want the measurements and numbers
in your P910i to be displayed in all your applications. Distances
can be displayed using the imperial or the metric system and
different punctuation marks can be used as separators.
To set the number details
1. Select
2. Select Time > Set location.
3. Select Numbers.
4. Choose separators and symbol positions from the drop-down
lists. You can tap the keyboard icon to find currency
symbols.
2. Select one of the alarm slots.
5. Tap Done.
4. Select When and choose how often you want the alarm to go
off:
– Once The alarm will go off once only, at a time more than
24 hours from now but within the next eight days.
– Next 24 hours Within the next 24 hours.
– Daily Every day at the specified time.
– Workdays Every workday at the specified time.
– Weekly Every week at the specified time.
Setting alarms
You can set up to three different alarms in your P910i. You can
choose to activate one of the preset alarms, or set a new alarm
with your own definitions.
You can choose to set a silent alarm, where only a message is
displayed when it goes off, or you can set a sound alert.
Alarms requires that the P910i is turned on. If you want to get
alarms in an environment where radio transmitters are not
allowed, you can set the P910i to flight mode, see ‘Flight mode’
on page 49.
Note If you have connected a stereo headset to the P910i, the
alarm will only be heard in the headset.
To activate an existing alarm
• Select the check box in the alarm slot.
status bar on the screen.
3. Select Time and choose at what time you want the alarm to go
off. Confirm by tapping outside the time picker.
5. Select Alarm sound and choose a sound.
6. Select Message and choose a preset message or write a new
one.
7. Tap Done.
8. Make sure the check box next to the alarm is selected.
When the alarm goes off, select Snooze to postpone the alarm for
five minutes or Silence to turn off the alarm sound. To turn off
the alarm completely, tap Done.
is displayed on the
To set a new alarm
1. Select
Time
121
Viewers and editors – Quickoffice
With Quickword™ and Quicksheet™ you can view and edit
Microsoft Word and Excel documents. With Pdf+ you can view
Adobe™ Acrobat™ (PDF) documents.
When the flip is open there are two views:
Common viewer and editor
functions
List view
An alphabetical list of files, for selecting a file to
view.
To open a document from an email or Internet page
Select the document link. The document viewer opens the
document in the detail view.
Detail view
The contents of a file, for viewing and editing the
file.
To open a document from the list view
The applications are also started automatically when selecting
and opening attachments to messages.
1. Select the Application launcher icon
To save documents to another location (internal or on the
Memory Stick) you use folders, see ‘Folders’ on page 28.
3. If required, change folder.
The functions available differ depending on the document type.
Common functions are similar between the applications and are
described first.
5. The document is shown in the detail view.
122
Viewers and editors – Quickoffice
2. Select, for example, the Quickword icon
4. Scroll to the desired file and select the file name.
Quickword
Quicksheet
To save and copy the document to a special folder
To save and copy the document to a special folder
1. In the list view, select Quickword > Copy to.
1. In the list view, select Quicksheet > Copy to.
2. Select where to save the document, and select Copy.
2. Select where to save the document, and select Copy.
To edit a document
In the detail view, from the toolbar at the bottom of the screen,
select the edit icon
To edit a document
The first time you edit a document (in native Microsoft Excel
format) transferred to your P910i, you have to rename it. When
you select OK, your P910i copies the document with the new
name.
The first time you edit a document (in native Microsoft Word
format) transferred to your P910i, you have to rename it. When
you select OK, your P910i copies the document with the new
name.
In the toolbar you find icons for performing the most common
word-processing functions.
When you have finished editing and leave the document, your
P910i saves it automatically.
At the bottom of the screen you find the spreadsheet character
input field, and icons for performing the most common
spreadsheet functions.
When you have edited the document and leave it, your P910i
saves it automatically.
Viewers and editors – Quickoffice
123
Pdf+
To save and copy a received document
1. In the detail view, from the toolbar at the bottom of the
screen, select the save icon
2. Name the document, select where to save it, and select Save.
To move a document
In the detail view, from the folder menu, select a new folder.
To view a document
Control the viewing from the toolbar at the bottom of the screen:
Bookmarks view. Select a heading to go to the corresponding
page. You can also use the Jog Dial to select a bookmark, and
then use the icon below to go to the corresponding page.
Takes you to the selected page.
Returns you to the page view.
Previous page.
Next page.
Full screen.
To return to the normal view, select the icon and de-select
Full screen.
124
Viewers and editors – Quickoffice
Wraps the document, that is the text is displayed in a format
which fits the screen. Images and line drawings are not visible
in this view.
Unwraps the document.
Search.
Search for links.
File manager
With the File manager you can view, rename, copy, move, and
delete files and folders on the P910i. You can also add folders,
send files and rename and format the Memory Stick.
Initially, the root view is shown, with the sub folders:
• Audio, where all audio files are stored.
• Document, where different document files are stored.
• Image, where all images, pictures as well as drawings, are
stored.
• Other, where all files not applicable for the other folders are
stored.
also format the Memory Stick, see ‘Formatting a Memory Stick’
on page 23.
To move within the folder structure
• To move up in the hierarchy - tap the top folder.
• To view the contents of a folder or a file - tap the top folder.
Folders are opened in the file manager while other files are
opened in the applicable application.
To add a folder
1. Select File > New folder.
• Video, where all video clips are stored.
2. Type a folder name and tap Done.
Using the folder menu, you can select between the internal
storage and the external storage, that is, the Memory Stick. The
path to the selected folder is shown at the top of the window.
To copy or move one or more folders or files
Note There is an important distinction between External media
and External other. External other lets you view folders that have
been placed on the Memory Stick by other equipment, such as
digital cameras. This is the only place where these folders can
be viewed.
3. Select the destination and tap Done.
1. Select the folders or files to handle.
2. Select the required activity from the File menu.
From the file manager it is possible to reach the Control Panel
storage manager, see ‘Storage manager’ on page 167. You can
File manager
125
To delete one or more folders or files
Note Only empty folders can be deleted.
1. Select the folders or files to delete.
2. Select File > Delete.
3. Tap Delete.
To change properties for one or more folders or files
1. Select the folders or files to change.
2. Select File > Properties.
3. Change the properties, as required.
4. Tap Done.
126
File manager
Online services
i Online services is a customized service offered by a network
operator. This function is network- or subscription-dependent.
Online services provides a mechanism that allows applications
that exist on the SIM to interact and operate with the P910i. It
may provide services ranging from weather forecasts to the
latest information from the stock market.
Online service are placed on your SIM card by your operator.
Note Contact your operator to find out which services are
available for your account.
Note If this service is available on your SIM, the Online
services application will appear in the application list under a
name defined by the SIM provider. However, the icon used to
represent the Online services application i will not change.
Online services
127
ADVANCED FUNCTIONS
PC Suite and multimedia for P910i
Sony Ericsson PC Suite
Installation of the Sony Ericsson PC Suite
The Sony Ericsson PC Suite CD delivered with your P910i
contains a set of useful applications:
The Sony Ericsson PC Suite programs can be used with Windows
ME, 98, 2000 and XP.
• Synchronization – Synchronization of Calendar, Notes,
Contacts and Tasks against Microsoft Outlook, Lotus Notes
and Lotus Organizer.
When inserting the CD in the PC, a start menu is automatically
shown. Select language and then start the Sony Ericsson PC Suite
Setup. Follow the instructions in the installation wizard.
• Backup and Restore – Make safety copies of your data via
SyncStation.
If the start menu is not automatically shown, use the Run
command in the Windows Start menu to start Start.exe from your
CD drive.
• File Manager – Transfer files (images, documents, music) via
Windows® Explorer between your P910i and PC.
• Install software – Install applications in the P910i.
• Download Language – Change the language in the P910i.
Additional languages are downloaded from
www.sonyericsson.com/support
• Dial-Up Networking Wizard – Wizard for GPRS and HSCSD
settings for using your P910i as a modem.
• Drivers – Drivers for modem and the USB cable connected
SyncStation.
Refer to the online help for each specific application.
128
PC Suite and multimedia for P910i
By default the Sony Ericsson PC Suite is
> Programs > Sony Ericsson > P910i.
accessed from Start menu
The Setup application also can be used later to add or delete
components.
You can download the latest PC Suite software from
www.sonyericsson.com/support
Multimedia for P910i
The Multimedia for P910i CD contains a number of applications
and files to be installed in, or downloaded to, your P910i and
used together with its applications.
• Games.
• Audio files.
• Pictures.
• Video clips.
• MMS templates.
• MMS editor
• Image editor
• Themes editor.
Opening the Multimedia CD for P910i
When you insert the CD in the PC, a start menu opens
automatically. Select an item from the menu and follow the
instructions on the PC screen.
If the start menu is not automatically shown, use the Run
command in the Windows Start menu to start CDBrowser.exe from
your CD drive.
PC Suite and multimedia for P910i
129
Installing applications
It is possible to install new applications in your P910i. These
applications can be obtained in several ways, for example:
• from the Internet.
• from a CD.
Applications which are not approved by Sony Ericsson are not
guaranteed to work correctly or securely, and users install them
at their own risk. Product failures caused by applications not
approved or made for Sony Ericsson will not be covered by your
warranty.
• from a Memory Stick.
• as an email attachment.
There are two types of installation files for applications:
Installing applications on your
P910i
• SIS (Symbian Standard Installation) made for P910i or other
Sony Ericsson devices.
Installation file security
• from other devices.
• MIDP JAR (Mobile Information Device Profile Java
Archive).
Note SIS and JAR files are installation packages containing one
or more files.
Programs made for the Sony Ericsson P800 and P900 series can
also be used in the P910i.
This chapter also applies to other types of software to install, for
example, system components and add-ons.
Applications from developers outside Sony Ericsson, so-called
third-party developers, might be possible to install in the P910i.
130
Installing applications
Installation files in SIS format are typically used for installation
of Epoc or PersonalJava™ applications or other content into the
P910i file system.The vendor who prepared the SIS file decides
where in the file system the various content of the SIS file will
be installed. This means that you need to decide if you trust that
the SIS file does not contain harmful content. If you are certain
of the origin of the SIS file you can take an installation decision
based on what you know about that vendor. Your P910i supports
cryptographic verification of vendor identity.
During installation the P910i verifies a digital signature and
certificate in the SIS file against a root certificate in the phone.
Successful verification means that you can trust the origin of the
SIS file and that the content has not been modified after it was
created. If the SIS file does not contain a digital signature you
will be given a warning about the problem but you can still
decide to proceed with the installation at your own risk. In
general, it is recommended that you install only from SIS files
where the vendor identity and file integrity can be verified.
Note Installation of uncertified applications may cause your
system to crash and all your data will then be lost.
MIDP applications run in a protected environment with no
access to sensitive information so no signatures are required for
MIDP JAR files.
From a PC
Sony Ericsson PC Suite must be installed in your PC and the P910i
must be connected to the PC via SyncStation, infrared, or
Bluetooth wireless technology in order to install applications
from your PC.
Installing applications from your PC
1. Connect your P910i to the PC via SyncStation, infrared or
Bluetooth wireless technology. When connected, an icon is
shown in the status area to the right in the taskbar on the PC.
2. Start the PC software Install Software and select the
application (.sis file) to install. You can also open a .sis file
directly in your PC.
3. Confirm to install the application in the P910i.
4. Select target drive (phone memory or Memory Stick).
Download to the P910i begins.
5. Installation starts when the download is complete.
From the P910i
Program packages, for example, games, can also be downloaded
to your P910i from the Internet or from a Memory Stick. When
downloading a file from the Internet, the installation will start
automatically when the file is completely downloaded to your
P910i. The procedure below describes installation of application
packages transferred to the P910i but not yet installed.
See ‘To download and upload files, for example, applications’
on page 80 for information about how to download files from
the Internet.
Installing applications in the P910i
1. Select
2. From the menu, select Applications > Install.
3. Select the software from the list.
4. Select Install. If the software is certified, an information
dialog will be shown with the name of the software, version
and supplier. Select Install again.
Installing applications
131
5. Now, depending on the software, you may be prompted to
replace a previous installation, select language, memory
location and select other installation options.
6. Installation is complete. Select Done.
Removing applications from
your P910i
It is sometimes necessary to remove installed applications and
user data to free up memory.
Removing applications in the P910i
1. Select
2. From the menu, select Applications > Uninstall.
3. Select the application to be uninstalled.
4. Select Uninstall.
5. Tap Yes to confirm.
6. Select Done.
Tip See also ‘Master reset’ on page 166 and ‘Storage manager’
on page 167 in Control Panel for more options regarding removal
of applications and user data.
Some removed applications can be reinstalled from the PC Suite
for the P910i and the multimedia CD.
132
Installing applications
Sony Ericsson Update Service
With Sony Ericsson Update Service you can keep your phone
updated with the latest P910i software. When a new software
version is available, you can download and install it using the
deskstand and an Internet-connected PC (preferably via
broadband).
To update the P910i software
1. Connect the desk stand to your PC and place your P910i into
it.
2. Visit Sony Ericsson P910i support site on
www.SonyEricsson.com/support
3. Select Sony Ericsson Update Service and follow the
instructions on how to proceed with the update sequence.
Answer Yes when you are asked if you want to install the Sony
Ericsson Update Service PC program.
Note User data can be lost when the software is updated.
Always back up the phone before updating.
Connecting to other devices
Your P910i can be connected to other devices with similar
interfaces such as PCs, other P910is and handheld computers.
The connection can be made via:
• Bluetooth wireless technology (not together with
Windows 98)
PC connectivity software
Your P910i is delivered with a CD, Sony Ericsson PC Suite. This
software must be installed in the PC you want to connect to. See
‘Installing applications’ on page 130 for more information. You
do not need to install the Sony Ericsson PC Suite if you only want
to perform beaming with the PC or use a cordless headset.
• Cable
• Infrared (IrDA)
Note Bluetooth wireless technology and infrared transmitting
are rather power consuming. Do not have them on more than
necessary.
Depending on the type of connection you have chosen, you can
use your P910i to perform various tasks, for example:
• Sending and receiving files via infrared or Bluetooth wireless
technology – ‘beaming’.
• Making Backup/Restore and Synchronization of your data
and file transfer (cable, infrared and Bluetooth wireless
technology).
You can even use your P910i as a modem for Dial-Up
Networking using cable, infrared and Bluetooth wireless
technology. With Bluetooth wireless technology, you can for
example, connect a cordless headset.
Connection via SyncStation
Connect the SyncStation to your PC with the USB cable. A
wizard helps you to install the USB cable the first time. The
Sony Ericsson PC Suite CD contains the necessary software.
Put your P910i in the SyncStation. A new wizard starts which
helps you to connect your P910i if this is the first time.
appears in the status area to the right on the taskbar when
the P910i is connected.
When connecting via cable, the P910i can be set in PC Connect
mode or Modem mode. The setting is made in Control panel >
Connections > Cable, see ‘Cable’ on page 152.
Set the P910i in PC connect mode for
• Synchronization.
• Installation of software.
Connecting to other devices
133
• Backup and restore.
To activate the infrared port on the PC
Set the P910i in Modem mode when using
1. Right click
• P910i as a modem.
• Dial-up network wizard.
You should disable the USB cable connection in these two
cases. In your PC select Start > Settings > Control Panel > Phone
Monitor Options > COM Ports and disable the COM port to
which the cable is connected.
Connection via Infrared port
When connecting via the infrared port, make sure that both
devices are placed within one meter from each other and that the
infrared ports have a free line of sight between them.
Both your P910i and the device you connect to must have their
infrared ports activated before communication can begin.
To activate the infrared port on the P910i
1. Go to Control panel > Connections > Infrared.
2. Set the P910i to PC connect or Modem as required.
3. Set the port state to On or On for 10 minutes.
You can also change the infrared port state with the flip closed,
in the Connections application.
134
Connecting to other devices
in the status area to the right on the taskbar.
2. Select Properties
3. Select the Infrared check box
4. Click Close.
Note Clear the Infrared check box when ready.
Send and receive
You can send items via the infrared port, beam, in any
application if there is a Send as command. To send, select
Infrared. If you receive a beamed item, a dialog box appears with
three options: Delete, View or Done. Delete deletes the item; View
opens the associated application which shows the item; Done
saves it in the Beamed folder in Messages.
Connection via Bluetooth
wireless technology
You can connect your P910i to other products equipped with
Bluetooth wireless technology, for example PCs, car handsfree
devices, or other mobile phones, and exchange data. Since
Bluetooth wireless technology is radio-based, there does not
have to be a free line of sight between transmitting and receiving
devices. This means that your P910i can stay in your pocket
while communicating. However, items between transmitting and
receiving devices might weaken the signal.
Connection to another device can be made within a range of up
to 10 meters. Obstructions between the transmitting devices will
have an effect on the performance. For all tasks, except
beaming, it is necessary that you first set up a permanent and
trusted relationship between your P910i and the other device.
This process is called pairing (other documentation may refer to
it as bonding). The paired devices are remembered by your
P910i even after you have turned it off so you do not need to
repeat the process for every connection with those devices. The
reason for pairing is to simplify future connections and to make
them secure – only paired devices can connect to your P910i.
Activating Bluetooth wireless technology
Activate Bluetooth wireless technology on your P910i in Control
panel > Connections > Bluetooth > Settings. Set Bluetooth to On, and
set if your P910i should be Visible by other devices or not. See
‘Bluetooth’ on page 151 for more information on Bluetooth
wireless technology settings.
The Bluetooth wireless technology operation mode can also be
changed with the flip closed, through the Connections
application. When the Bluetooth wireless technology is
activated,
appears on the screen and the left indicator light
on top of your P910i flashes blue.
Pairing
To let your P910i initiate pairing with another device, such as
a headset
1. In Control panel > Connections> Bluetooth > Settings, set Bluetooth
to On. Make sure Visible to other devices is selected.
2. Set the other device to be on or discoverable.
3. In the Devices tab, tap Add. Your P910i searches for all
devices in the vicinity and lists them.
– All enabled devices that are visible to others within range,
are shown with their name and icon. You can use Show: to
restrict the list to one category (only PC, for example).
– Paired devices that are within range are shown with
regular text.
– Non-paired devices that are within range are shown with
their names in italics.
– Devices that are within range but unknown are shown
with a preset name.
4. Select the device you want your P910i to pair with, and enter
a passcode when asked for it. When the passcode is accepted,
the pairing process is complete, see ‘Passcodes’ on page 136.
5. If in the future you want to allow a paired device to connect
to your P910i without you explicitly approving each
connection, you should select Control panel > Connections >
Bluetooth > Devices, then select a device and the check box
Allow to connect without confirmation.
Connecting to other devices
135
To let another device initiate pairing with your P910i
1. In Control panel > Connections > Bluetooth > Settings, set
Bluetooth to On.
2. Follow the other device’s manual to initiate pairing.
3. When asked for a passcode, enter the same on both devices.
4. If in the future you want to allow a paired device to connect
to your P910i without you explicitly approving each
connection you should select Control panel > Connections >
Bluetooth > Devices, select a device and the check box Allow to
connect without confirmation.
Tip You can change the name of a paired device. When you pair
with other Bluetooth wireless technology enabled phones, it is
very useful to include the user's name as part of the device
name. This will make it very easy to beam information to the
desired recipients.
To let a headphone initiate pairing with your P910i
1. Check that the device you want to pair with your P910i:
– Is on and within range.
– Has its Bluetooth function activated and that it is in
visible mode.
2. In Control panel > Connections > Bluetooth > Settings, set
Bluetooth to On.
3. Follow the headphone’s manual to initiate pairing on the
headphone.
136
Connecting to other devices
4. In the Devices tab tap Add. Your P910i searches for all devices
in the vicinity and lists them.
5. When asked for a passcode, enter the headphone’s passcode
on your P910i.
6. If in the future you want to allow the headphone to connect to
your P910i without you explicitly approving each
connection, you should select Control panel > Connections >
Bluetooth > Devices, select the headphone and the check box
Allow to connect without confirmation.
To remove a paired device from your P910i
Select a device in the list and select Remove.
Passcodes
Passcodes ensure that the device you pair with really is the
device you think it is. A passcode is a set of numbers and/or
letters (at least four characters) that you agree to exchange with
the owner of the other device. Simply agree a passcode with the
other user and each enter the same code into both devices when
asked for it. The actual code is up to you; the important thing is
that you both enter the same code. Accessories like headsets
often have a default passcode, usually ‘0000’, see the specific
user guide.
Send and receive
You can send items via Bluetooth wireless technology in any
application if there is a Send as command. To send, select
Bluetooth. If you receive an item via Bluetooth wireless
technology, a dialog box appears with three options: Delete, View
or Done. Delete deletes the item; View opens the associated
application which shows the item; Done saves it in the Beamed
folder in Messages.
Bluetooth share
You can make it possible for other users to transfer items from
your P910i. To make an item accessible, select Send as >
Bluetooth Shared. The item is then copied to the Shared folder,
accessible by other users. When a user requests to access your
Shared folder, a request dialog is shown, where you can Accept or
Reject the transfer.
Connecting to other devices
137
Synchronization and backup
With Sony Ericsson PC Suite installed in your PC, your P910i can
synchronize with the following PC applications, also called
Personal Information Managers (PIMs):
Local synchronization
Bluetooth
• Lotus® Organizer® 5 & 6, 6.5
• Lotus Notes® 5.0, 6
• Microsoft Outlook 98, 2000, 2002, 2003
Irda
• Microsoft Windows Address Book
Synchronization is divided into local and remote. Local
synchronization is performed directly to a connected PC while
remote synchronization is done over the air with a remote server
in, for example, a corporate network.
The manual describes the easiest way to perform the tasks but
you can also carry out most of them by selecting Start > Programs
> Sony Ericsson > P910i in the PC and then select the desired
command.
Refer to the online help find in Help in the menu bar in the PC
software to get more information about synchronization and
backup.
Note If you have imported SIM phonebook entries into Contacts
in your P910i, these entries will not be synchronized with the
corresponding entries in your PC when synchronizing your
P910i and PC. You will instead get duplicates in your P910i.
138
Synchronization and backup
Cable
Local synchronization is done with either cable, infrared or
Bluetooth wireless technology. The functionality is the same.
Email, Contacts, Calendar, Tasks, and Jotter notes (only text)
can be synchronized locally.
Local synchronization settings
Local synchronization is initiated from the PC and all settings
are made in the P910i PC software (included on the Sony
Ericsson PC Suite CD).
The easiest way to synchronize is to set the Synchronization to
automatically make a synchronization every time your P910i is
connected.
To make the synchronization settings
In the PC, click on
in the status area to the right in the
taskbar on the PC and select Sync Station Settings.
A dialog appears where you can make the synchronization
settings. Click Help in the dialog to get more information about
the settings.
Making a local synchronization
To make an automatic synchronization
3. After a short time, the PC application you want to
synchronize with might ask you to allow the P910i access to
it. Answer Yes and the synchronization continues.
Remote synchronization
Remote synchronization takes place over the air and is the ideal
way to keep the P910i up-to-date while on the move. Using
GPRS, the P910i can be continuously connected to the remote
synchronization server.
1. Connect your P910i via SyncStation, infrared or Bluetooth
wireless technology. For more information, see ‘Connecting
to other devices’ on page 133.
GPRS, HSCSD
or CSD
2. Synchronization starts automatically.
3. After a short time, the PC application you want to
synchronize with might ask you to allow the P910i access to
it. Answer Yes and the synchronization continues.
To make a manual synchronization
1. Connect your P910i via cable, infrared or Bluetooth wireless
technology. For more information, see ‘Connecting to other
devices’ on page 133.
PIM Application
Sync Server
Firewall
Internet/Intranet
2. In the PC, click on
on the PC taskbar and select
Synchronize.
The synchronization starts.
Synchronization and backup
139
Synchronization services may be offered by mobile operators,
third-party service providers and as added capability to
corporate PIM applications.
3. Fill in the Task name or leave default.
Contacts, Calendar, and Tasks can be synchronized remotely.
5. The item you selected to be synchronized is now above the
divider in the list. (Disabled items are below the divider.)
Remote synchronization settings
6. Repeat for other items.
To configure the remote synchronization server
In Applications, select
Remote Sync > Edit > Preferences and fill
in the following parameters:
Making a remote synchronization
– Server address
– Username
– Password
You might also need to fill in whether to use transport login
under the Protocol tab. Contact your corporate information
services help desk or your service provider for information on
these parameters.
You also need to have at least one configured Internet account
that remote sync can use to connect, see ‘Internet accounts’ on
page 153.
To select items to synchronize
1. In Remote Sync, select one item in the list you want to be
synchronized.
2. Select the Enable task check box.
140
Synchronization and backup
4. Fill in the Server database (contact your corporate
information services help desk or your service provider).
Open Applications > Remote Sync and tap the Sync button.
When ready, the Task status column shows today's date for all
successfully synchronized items.
Backing up data
You can use the P910i Backup and Restore PC software to back up
the contents stored in your P910i to your computer. Keeping
backups of your P910i contents on your computer means that
you have a separate copy of the contents of the P910i, which can
be restored into the P910i. Backups should be made on a regular
basis. See the online help for P910i Backup and Restore for more
information on how to use the application.
Note All user data will be deleted when the P910i software is
upgraded by a Service Partner. Always back up your data before
handing over the P910i for upgrading, so that you can restore it
afterwards
Preconditions
To restore a backup
The Sony Ericsson PC Suite must be installed in the PC and the
P910i must be connected to the PC via cable.
1. Turn on your P910i and connect it to the PC via cable.
Note Backup and restore does not work via infrared or
Bluetooth wireless technology.
Performing a backup
To make a backup
1. Turn on your P910i and connect it to the PC via cable.
2. In the PC, click on
and restore.
on the PC taskbar and select Back up
3. Select your P910i in the menu that appears. Several P910is
can be backed up to the same PC.
4. Select Backup and choose what to back up: P910i and/or
Memory Stick.
5. Click Yes and follow the instructions in the PC and in the
P910i.
6. The backup is complete.
2. In the PC, click on
and restore.
on the PC taskbar and select Back up
3. Select your P910i in the menu that appears. Several P910is
can be backed up to the same PC.
4. Select one of the backups in the list of previously saved
backups and click Restore.
5. Click Yes and follow the instructions in the PC and in the
P910i.
6. The restore is complete.
Note Everything in your P910i will be overwritten by the
chosen backup. Once you have clicked Yes to start the restore,
you cannot cancel the procedure.
Note If you have used your Secure Tokens (Secure Access files)
since you made your backup, you must reconfigure these. If you
restore another P910i, you must reconfigure your Secure
Tokens. For more information see ‘Secure tokens’ on page 166.
Restoring data
Lost data or accidentally deleted information in your P910i can
be restored from an earlier backup. A backup from the phone
can only be restored to the phone, and a backup from a Memory
Stick can only be restored to a Memory Stick.
Synchronization and backup
141
SETTINGS
Personalizing your P910i
There are a number of ways you can give your P910i a personal
touch and change its settings to suit your requirements.
Themes
Themes control the color of screen and text, the icons, and the
background picture, the wallpaper. Sound themes control the
notification alerts. Four themes are pre-loaded in the P910i.
Extra themes can be found on the Multimedia for P910i CD
where you also can use the themes editor to modify the themes
or create new.
To change the theme, select
see ‘Themes’ on page 149.
Control panel > Device > Themes,
Changing your application
shortcuts
You can change and rearrange the five shortcuts to applications,
shown in the standby screen when the flip is closed, and the five
first shortcuts in the Application picker area in flip open (not the
Application launcher
). The flip closed shortcuts can even
be hidden, if you wish.
142
Personalizing your P910i
Setting a background picture
You can change the background image (wallpaper) for the
standby screen in
Control panel > Device > Display. You can use
any image stored internally or on a Memory Stick.
Tip More background images can be found on the Multimedia
P910i CD, delivered with your P910i.
You can obtain suitable background picture files by
downloading, MMS, beaming using Bluetooth or infrared, or
transferring them using a cable from your PC.
Background picture images are 208 x 144 pixels and the picture
can be seen in the standby screen. (Any chosen picture will be
scaled to fit the screen). The images can be JPEG, GIF, BMP,
WBMP, MBM or PNG format.
Setting the light intensity
You can set the maximum and minimum display light intensity.
This is useful to save the battery or protect your night sight
when driving a car. See “Power tab” on page 146.
Setting a screen saver
You can set a screen saver picture to be displayed after a period
of inactivity. See ‘Display’ on page 145. Keylock and device
lock may be used in combination with the screen saver. When
you press a key or touch the screen, you will be prompted to
activate keys and/or enter the device lock code.
The images can be JPEG, GIF (including animated), BMP,
WBMP, MBM or PNG format. Image format for the screen
saver is 208 x 320 pixels.
Note Using animated GIF uses more power.
If your network operator provides a CLI (Calling Line Identity)
service, your P910i can display the contact’s picture together
with the other information when an incoming call is received
with a CLI matching that contact (not all numbers can be
displayed). The contact’s picture is also displayed when you
make a call to that person.
To choose the contact’s picture size
1. Select
Phone > Edit >Preferences > Incoming call picture.
2. Select the Show large pop-up picture for incoming calls check
box.
3. Tap Done.
Adding images to your
Contacts
You can store a picture with
each entry in Contacts. See
‘Creating and editing
contacts’ on page 104.
Ring signals
11:03
John S mith
+4613244500 (h)
Pictures are easily taken
using the CommuniCorder
(see ‘CommuniCorder’ on
page 59) though of course
other images can be used.
Your P910i can play both iMelody format and polyphonic ring
signals in WAV, AU, AMR, MIDI, RMF, and MP3 sound file
formats. When you choose a ring signal, your P910i will scan
the internal and Memory Stick storage and present you with a
list of ring signals that are in these formats. Recordings you
have made using Sound Recorder can also be selected.
Ring signals can be added by downloading from the Internet,
beaming using infrared or Bluetooth wireless technology file
transfer from a PC and by using a Memory Stick. Extra ring
signals can be found on the Multimedia for P910i CD-ROM.
End call
Personalizing your P910i
143
You can add as many ring signals as desired, subject only to
available storage space.
Tasks
Set a sound for reminder alarms. See ‘Preferences’
on page 113.
Tip Sound Recorder recordings are listed as voicenote and a
number, for example voicenote1470.
Messages
Set a different sound for each type of message as
notification of a new message:
See ‘Sounds and alerts’ on page 147.
A ring signal may be selected for an entry in Contacts, so that
the caller can be identified by the ring signal that is played. See
‘To personalize the ring melody for a contact’ on page 105.
Note The mobile network must provide the CLI (Calling Line
Identity) of the caller to enable the contact to be identified.
You may change the default ring signal that is played in all other
cases. To do this, see ‘Sounds and alerts’ on page 147.
Note If your P910i finds that you have renamed, moved or
deleted a ring signal, it will play the default instead.
Alarm tones and sound
notification
You can choose different sounds for alarms and notifications in
these applications:
144
Time
See ‘Setting alarms’ on page 121.
Calendar
Set a sound for reminder alerts, see ‘Preferences’
on page 110).
Personalizing your P910i
Note If you use an audio file as alarm or notification signal, it
will be played using the Multimedia volume setting. The ring
volume setting will not effect the sound volume.
Control panel
The Control Panel is the location for all the main settings on
your P910i that are system-wide and affect more than one
application. This is the main place to go to initially set up your
P910i, and to change settings at any point thereafter. To access
Applications >
Control panel.
it, select
Tip You can find settings that apply to a single application in
the Preferences menu of the application, for example: Phone > Edit
> Preferences, CommuniCorder > CommuniCorder > Preferences,
Internet > Edit > Preferences.
The sections below describe the settings available for each of
the default items in the Control panel.
The Device tab
The device tab contains settings related to the behavior of your
P910i device itself.
Application shortcuts
and ‘Navigation’ on page 17. You can change the five shortcuts
shown. If you feel that the flip closed shortcuts obscure your
background, you can choose to have them hidden when you do
not need them.
To change an application shortcut
1. In the Application shortcuts dialog, select the Flip open or Flip
closed tab depending on the shortcuts you intend to change.
2. Select the icon you wish to change. The name of the
application is shown in the Set application pick list.
3. Choose the application you want to replace it with from the
list.
To hide the flip closed application shortcuts when your P910i
is inactive
Clear the Shortcuts always displayed check box.
Display
Use the Display settings to control the screen and power
functions of your P910i.
Use this dialog to configure the application shortcuts shown in
the flip closed standby view, and the Application picker
shortcuts in the flip open mode. See ‘Standby view’ on page 15
Control panel
145
Wallpaper tab
You can set a picture to be the background, wallpaper, for the
standby screen.
1. Select if the flip closed or flip open wallpaper should be
changed.
2. Tap the image showing the current picture.
3. Browse to see picture files available on your P910i.
4. Select a picture and tap Select.
Read more about background in ‘Personalizing your P910i’ on
page 142.
Screen tab
screen ensures that the correct item is activated. Tap Calibrate
screen and follow the instructions.
Power tab
You can set if the power save should switch off the screen, blank
the screen or show a clock on the screen. You can also set the
power save time between 1 and 30 minutes.
If you set times for both screen saver and power saver, the
power saver time will commence after the screen saver is
displayed.
You can set the screen light settings for handheld use and car
use.
Auto
Light switches on when you tap the screen, press a key, or
receive an incoming call
1. Select a picture for the screen saver.
On
Light is always on
2. Set the activation time for the screen saver.
If you select the Screen saver device lock check box the device
lock will activate when the delay runs out. Read more about the
device lock in ‘Device lock’ on page 38.
Off
Light is always off
You can set a picture to be the screen saver.
If you set a time for the Automatic Input Lock, the keyboard lock
will activate when the time runs out. Read more about the
automatic keylock in ‘Automatic keylock’ on page 39.
Occasionally you may find that you tap one item (for example a
button or menu option) but another is activated. Calibrating the
146
Control panel
Select Adjust brightness to set to set the normal (max) and
dimmed (min) light intensity for handheld use and car use. The
Brightness box works as a slider.
Flight mode
On the Location tab
In flight mode the radio function is turned off. You cannot make
and receive calls but most of the other functions in the P910i are
available.
• Set Current country/region and Current city to your current
location.
Use these settings to turn the flight mode on or off and also to
activate the Power menu. When activated, the Power menu will
ask you if you want to start the P910i in normal mode or flight
mode each time you turn on the P910i. Also, when you press the
On/Off button when your P910i is on, the Power menu will ask
you if you want to turn off the P910i, or switch to another mode.
To activate the Power menu
Select the Prompt me... check box and tap Done.
To cancel the selection of Power menu
Clear the Prompt me... check box and tap Done.
International
Use these settings to set the locations shown in
Time, as well
as the units for distances, numerical separators, and how
currency values should be shown.There are two tabs: Location
and Numbers.
• Set Other country/region and Other city to an alternative
location (for example your home location if you are abroad).
If the city you want is not listed, select another city in the
desired time zone.
On the Numbers tab
Set the decimal separator and thousands separator you desire.
Locks
Locks contains options for activating the locks on the device,
the SIM card and the keys on the keypad, and for changing the
lock codes, see ‘P910i locks’ on page 37.
Sounds and alerts
Use these settings to control sounds and alerts of your P910i.
• Calls tab – Sets ring tones and volume.
• Messages tab – Sets notification alerts for messages.
• Other tab – Sets button and screen clicks, reminders, alarms,
and other notifications.
Control panel
147
You can choose to use any sound recording or audio file. You can
select ring signals that are stored on your local storage or on a
Memory Stick. If the selected file is later deleted or moved, the
Default Melody will be played instead.
Note To set vibrating alert, silent mode, speakerphone or mute
the microphone, tap the volume icon on the status bar.
Note If you use an audio file as a ring tone, alarm or
notification signal, it will be played using the Multimedia
volume setting. The ring volume setting will not affect the sound
volume.
These settings set incoming call alerts. For more information see
‘Ring signals’ on page 143.
To listen to the selected ringtone or alert
• Ring (voice) – Select a ring signal for incoming voice calls.
1. Tap the
2. Tap again to stop playback.
• Ring (voice) line 2 – Select a ring signal for incoming voice
calls.
To change the default ring tone or alert
• Ring (data) – Select a ring signal for incoming data calls.
1. Tap the drop-down menu.
• Ring volume – Set the preferred sound level for handheld,
handsfree and car use.
icon to listen to the signal.
2. Select Default Melody for the P910i default or Find sound to
select a new one.
3. If required, change folder.
Calls tab
You may personalize the ring melodies further for individual
contacts, see ‘To change the details of a contact’ on page 105.
• Increasing ring – Select the checkbox to use increasing ring
signals. This disables the other volume settings.
4. Select the required sound
5. Tap
and
to preview the sound.
Messages tab
6. Tap Select to set this sound.
These settings set messaging alerts.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear. Exposure
to excessive volume may damage hearing.
• Display notification message – Select the check box to receive
notification of a received message.
• SMS – Select an alert for received SMS messages.
• Email – Select an alert for received Email messages.
148
Control panel
• MMS – Select an alert for received MMS messages.
• Area info – Select an alert for received area information
messages.
Use the settings on the Primary, Alternative and Flip Closed tabs to
set methods for entering text in your P910i.
Primary
The method that you select here is activated
automatically when you need to enter text into your
P910i.
Other tab
Alternative
The method that you select here is activated if you
tap
at the bottom of the screen.
These settings set button and screen clicks, reminders, alarms,
and other notifications.
Flip closed
The method that you select here is activated when you
need to enter text with the flip closed.
• Auto setup – Select an alert for auto setup messages.
• Button click – Select the sound used when you press a key on
the keypad.
If you load other text input software, select it and adjust its
settings here.
• Screen tap – Select the sound used when you tap the screen.
• Key press – Select the sound used when you press a key on
the keyboard on the flips inside.
Themes
• Reminder – Select an alert to be played for reminders.
You can set the look of the user interface by changing the theme.
• Voice messages – Select an alert to be played for voice
messages.
• To change the theme, select a theme from the list. The picture
shows the flip closed standby background. Tap Select.
• Default alarm – Select the default alarm sound.
• To listen to a theme sound, select the event from the dropdown list. Tap the icon to play. Tap again to stop playback.
• To send a theme, select the theme and tap Send as.
• To delete a theme, select the theme and tap Delete.
Text input
There are several standard ways of entering text in your P910i.
See ‘Entering text with the flip closed’ on page 32 and ‘Entering
text with the flip open’ on page 33.
Control panel
149
Time & date
Adjusting the time and date here sets these throughout your
P910i.
The dialog has three tabs. You can set:
2. Select the am/pm box.
This is only possible if you use the 12-hour time format.
3. Confirm by tapping outside the time picker.
If the locations you have set under
Control panel >
in a country/region that currently has
summertime (daylight saving time), you can adjust the time and
date.
International are
Time & date
The current time and date. Here you can also turn
Summertime (daylight saving time) on or off for your
location.
Format
Specify how you want the time and date to be displayed
on the screen.
Workdays
Specify the days in your working week.
Note These settings are also available in the
application.
Time
To turn daylight saving time on
1. On the Time &date tab, select Summertime, select the check
boxes for the zones that currently have daylight saving time.
2. Select Done.
Format tab
Time & date tab
To set the current date
You can specify how you want the time and date to be displayed
on the screen, and if you want to use the 12-hour (am/pm) or 24hour time format.
1. On the Time & date tab, select the date. A calendar view opens.
Tap the arrows to set the current year and month.
To set the time and date display format
2. Select the current date.
1. Select Date format and choose a format.
To set the current time
1. On the Time & date tab, select the time. Select the upper half of
the hour or minute box to increase the number displayed, or
the lower half to decrease the number.
150
Control panel
2. Select Date separator and choose a separator.
3. Select a Time format.
4. Select Time separator choose a separator.
5. Select Done.
Workdays tab
You can specify what days you work, if, for example, you want
to set an alarm that sounds only on workdays. You can also
specify the first day of your week to customize the display of
both Week and Month views in Calendar.
User greeting
Your P910i can show a user greeting on the standby screen when
you turn it on. Use this dialog to turn this function on or off. You
can define your own user greeting text (up to 32 characters).
The Connections tab
The connections tab contains settings related to how your P910i
communicates with other devices.
Bluetooth
Bluetooth wireless technology uses radio waves to enable
wireless connections between your P910i and other Bluetoothenabled devices. This method of linking works well at a range of
up to 10 meters. Obstructions between the transmitting devices
will have an effect on the performance. Read more about
connecting to other devices using Bluetooth wireless technology
in ‘Connection via Bluetooth wireless technology’ on page 134.
Bluetooth settings
are shown on two tabs:
Settings
• A device name for your P910i.
• Bluetooth on or off.
• If it should be visible to other Bluetooth equipped
devices.
Devices
A list of all the Bluetooth-enabled devices that your
P910i is paired (bonded) with.
• To change the name of a device, and to allow for
connection without confirmation, select the name in
the list.
• To remove a device from the list, select the name and
select Remove.
• To locate other devices in the vicinity, and add them to
the list, tap Add.
Tip You will probably find that the preset name of your P910i,
and of devices you pair it with, are not very meaningful or easily
recognizable. It is a good idea to change these names to
something more useful. The name you choose for your P910i
appears on any devices you pair it with.
See ‘Pairing’ on page 135 for instructions on how to connect to
another device using Bluetooth wireless technology.
Control panel
151
Security
On the Settings tab you can set the Bluetooth security related
settings of your P910i.
Bluetooth on
All Bluetooth wireless technology functionality from
your P910i works. Visibility according to the Visible
to other devices setting.
Set Bluetooth to Off if you do not use Bluetooth, it
will decrease battery drain. Bluetooth will
automatically switch on if you use Send as >
Bluetooth from the applications
Visible to
other devices
Selected: All Bluetooth wireless technology
functionality from your P910i works.
Cleared: All Bluetooth wireless technology
functionality from your P910i works but you cannot
receive beamed items, and other devices cannot
initiate pairing with your P910i.
Cable
Use Cable to set the cable connection mode and the connection
parameters used when communicating through your P910i's
cable port.
• Set the cable connection mode. Please note that you must set
the mode to Modem when using the P910i as a modem and
when using the DUN (Dial-up Networking) Wizard.
152
Control panel
• Set the baud rate, parity, number of stop bits, character length
and type of flow control required for the connection. When
connecting your P910i via the desk stand to a USB port on
your PC, use the following (default) settings:
Baud rate
Parity
Stop bits
Character length
Flow control
115200
None
CTS/RTS
Tip You can set the cable connection mode when the flip is
Applications >
Connections >
closed by selecting
Cable.
GSM Networks
This option lets you choose what network to use when you are
outside your operator’s area. Choose if you want to search for a
new network or use a preferred one. You can also make a list of
preferred networks.
• Search mode – Select between automatic or manual search for
a network.
• Select network – Tap the button to get a list of available
networks.
• New search – Tap the button to search for available networks.
• Preferred list – Show the networks that your P910i will search
for when you are outside your home network.
P910i automatically uses to access the Internet. You need to set
up an Internet account before you can:
Note Your operator may not allow you to access all available
networks.
• Access Web pages and download multimedia messages.
To add a network to the preferred list
1. Tap Add network.
2. Select a network from the displayed list.
3. Select a position in the Preferred list and tap Done.
Infrared
Use this setting to control the state of the infrared port of your
P910i.
• Set up an email account to send and receive email messages.
Tip A simple way of setting up an Internet account is to ask
your service provider to send you a message that contains the
required information to create an account automatically on your
P910i.
There are three types of Internet account:
Dial-Up:
High-Speed Dial-Up: For High-Speed Dial-Up (HSCSD, High Speed
Circuit Switched Data) connections you are
charged for the length of time you are
connected but you can increase the connection
speed so that information is transferred faster.
Set the infrared status to PC connect or Modem, as required.
You can set it Off, On or On for 10 minutes. Read more about
connecting to other devices using infrared in ‘Connection via
Infrared port’ on page 134.
Internet accounts
You access the Internet using an Internet Service Provider (ISP),
who supplies you with account details including: a username, a
password, and the phone number or Web site address that your
For Dial-Up (CSD, Circuit Switched Data)
connections, you are charged for the length of
time that you are connected to the Internet.
The service must be included in your
subscription and billing rates from your
network operator may increase as you increase
the connection speed.
GPRS :
For a GPRS connection you are charged for the
amount of information you view, download, or
send.
The dialog has two tabs: Accounts and Other.
Control panel
153
Accounts tab
New
The Internet accounts dialog lists all the Internet accounts that
have been set up on your P910i.
For some accounts you may need to make advanced settings,
provided by your ISP. Select Advanced and enter settings on the
tabs as described below
You can add a New account to the list and Edit or Delete an
existing account.
If you want to select an Internet account every time you connect
to the Internet, select the Show connection dialog check box. This
may be useful if you use different Internet accounts for
Internet and
Messages.
Whenever you connect to the Internet, your Preferred account is
the account that your P910i prompts you to use.
To create a new Internet account
1. On the Accounts tab, select New.
2. Give the account a name. This will be the name shown in
your list of accounts. (In dialogs that appear while a
connection is being established the text -GPRS is
automatically added to names of GPRS accounts.)
3. Choose the Connection type for the type of account that you
want to create, GPRS or Dial-Up.
4. Continue entering settings as required. These will differ
depending on the type of account: GPRS, Dial-Up or HighSpeed Dial-Up:
154
Control panel
GPRS account
GPRS Advanced tabs
Server
User name and password
Normally, you do not have to enter a username and
password when you connect to a GPRS account.
However, some service providers may require you to
enter these details.
If you select the Username and password required
check box, but do not enter a username and
password, you will be prompted to enter these when
the P910i connects.
Address
Enter the Internet address of your access point. The
address is supplied by your service provider.
GPRS Advanced tabs
Log in
The settings on this tab deal with IP and DNS
addresses.
The DNS address uniquely identifies your Internet
Service Provider (ISP)'s computers, which your
P910i uses to connect to the Internet. Your P910i can
normally fetch these addresses automatically from
most ISPs.
If, after setting up an Internet account, you cannot
connect to the Internet and you suspect these
addresses are incorrect, ask your ISP for their
primary and secondary DNS addresses.
An IP address consists of four 3-digit boxes and valid
input is between 000 and 255 in each box.
Proxy
A proxy server is a computer connected between
your P910i and the computer you communicate with.
This arrangement can be used for connections to
Remote Sync servers, or within a company network.
If this setting is needed, your company's Information
Services department or Remote Sync provider must
give you instructions.
Other
If your ISP supports Point to Point Protocol (PPP)
extensions, you can select the Enable PPP extensions
check box. PPP extensions allow your P910i to
provide features such as encryption, which increases
the security of your Internet connection.
GPRS Advanced tabs
Authentication is used by some network operators to
identify the mobile phone connecting to their GPRS
network. There are different methods, or protocols,
for doing this.
Normal: PAP (Password Authentication Protocol).
The user's username and password are transmitted
over the network in an unencrypted form.
Secure: CHAP (Challenge Handshake
Authentication Protocol). The user's username and
password are never transmitted over the network.
None: No authentication is required by the network
operator.
QoS
Check with your network operator before changing
any of the QoS (Quality of Service) settings.
The settings Precedence, Delay, Peak rate, and Mean
rate are all by default set to Subscribed, which means
that your operators default QoS (Quality of Service)
values will apply. Reliability is set as Class 3 by
default.
New
Dial-Up or High-Speed Dial-Up account
Your Internet Service Provider (ISP) supplies you with your User
name, your Password, and their Phone number, which your P910i
dials to connect to the Internet. If you have a High-Speed DialUp account with your network operator you can increase the
speed of your connection by making settings on the Speed tab
under Advanced.
Control panel
155
Tip To avoid having to change the phone number when you
travel abroad: enter the international dialing prefix (for
example '+') and the appropriate country code for your ISP.
Dial-Up and High-Speed Dial-Up Advanced tabs
Select the check box Post connect terminal if:
• The login script of the account that you are setting up
requires that you input certain information or you will
need to respond to prompts from the Internet accounts.
You are connecting to a Dial-Up account that uses Secure
Access generated by a separate smart card or password
generator.
For some accounts you may also need to make advanced
settings.
Select Advanced and enter settings on the tabs as described
below
Proxy
For an explanation of these settings, see Proxy in the
‘GPRS Advanced tabs’ on page 154.
Dial-Up and High-Speed Dial-Up Advanced tabs
Log in
The settings on this tab deal with IP and DNS addresses.
For an explanation of these settings, see Log in in the
‘GPRS Advanced tabs’ on page 154.
Speed
You can only increase the speed of your connection if you
have a High-Speed Dial-Up account with your network
operator.
Script
As an alternative to entering your username and password
to access the Internet you may need to use a login script
stored on your P910i. Although uncommon, scripts may
be required by your Internet Service Provider (ISP).
Select the Use login script check box and enter the script
text in the Script editor.
If you select the check box Plain text authentication
(required by some ISPs), the security of your connection
will decrease during the connection process. Once you
are connected, the security of your connection will be
restored.
Secure
To enable secure access for this Internet account you
must link it to a vendor-associated Secure Token in this
dialog:
1. Select the Enable secure access check box.
To create or delete Secure Tokens on your P910i, select
Control panel > Other >Secure tokens.
2. Select the vendor and token names of the Secure Token
that you want to link to this account from the drop-down
lists.
Other
If your Internet Service Provider (ISP) supports Point to
Point Protocol (PPP) extensions, you can select the
Enable PPP extensions check box. PPP extensions allow
your P910i to provide features such as encryption, which
increases the security of your Internet connection.
156
Control panel
To edit an Internet account
1. On the Accounts tab, select the account in the list.
2. Select Edit.
3. Change your settings as desired.
4. Select Done.
Note If you change the Connection type, all account data for that
account will be deleted.
To delete an Internet account
1. On the Accounts tab, select the account in the list.
2. Select Delete.
not receive incoming calls. As soon as the transfer stops
(Icon:
) incoming calls will be accepted.
Setting the Preferred mode lets you choose how you want to use
your P910i:
• Select GPRS only if you do not want to be disturbed by
incoming phone calls while browsing the Web. All incoming
voice (and GSM data) calls are rejected. If you disconnect
from the Internet, incoming calls can be received. Outgoing
calls are possible, except during data transfer. This mode is
useful if you are using sensitive Internet services, such as
banking.
Other tab
• If you select GSM only, your P910i will not be connected to
the GPRS network. If you choose to download email or
browse the Web, your P910i will connect to GPRS only as
long as is needed for the data connection.
You can use the Dial-up timeout and GPRS timeout settings to set up
your P910i to disconnect automatically from the Internet, if you
are not using it. The connection is broken after the period you
specify has lapsed.
• If you select Automatic, your P910i will let you answer
incoming GSM calls while having normal GPRS
functionality. A GPRS data connection will be temporarily
interrupted by a voice call.
3. Select Done.
Preferred mode (bearer preference)
Please note that your P910i can be used for either voice (or
GSM data) calls or transferring GPRS data, but not both at the
same time. It may, however, still be connected to GPRS. As an
example, during GPRS data transfer (Icon:
) your P910i may
Messaging accounts
The
Messages application can handle many different types
of messages, but you must first set up accounts and make
settings as described below.
Control panel
157
The Messaging accounts dialog has four tabs, one for each type
of messaging account:
Email
You can have any number of email accounts. To receive
and send email, you must first set up an Internet account
(if one is not already set up). See ‘Internet accounts’ on
page 153.
SMS
You can only have one SMS (Short Message Service)
account.The settings on this tab also apply to EMS
(Extended Message Service) messages.
MMS
You can only have one MMS (Multimedia Messaging
Service) account. To receive MMS messages you must
first set up Internet and WAP accounts (if not already set
up). See‘Internet accounts’ on page 153.
Area
You can only have one Area info account. The number of
Area Information channels that you can subscribe to is
limited by the space on your SIM.
Tip A simple way of setting up an email or multimedia message
account is to ask your service provider to send you a message
that contains the required information to create an account
automatically on your P910i.
Email tab
The Email tab shows a list of the email accounts on your
P910i.You can add a New account to the list and Edit or Delete an
existing account.
You can choose one of your email accounts as Preferred. This
will be the email account that your P910i uses when you use
Send as to send an entry as email directly from one of your P910i
applications
To create a new email account
1. On the Email tab, select New.
2. Enter the following settings on the tabs:
Email account basic tab settings
Account name
This is the name you give to your email account.
Your name
This name appears on your outgoing email
messages.
Email address
Your Internet Service Provider (ISP) supplies you
with your email address.
Connection type
Select POP3 or IMAP. POP3 is most common.
IMAP makes it possible to subscribe to server
based folders.
Internet account
Select the Internet account to access your email
messages.
Read more about the different types of messages in ‘Messages’
on page 87.
158
Control panel
Email account Inbox tab settings
Email account Outbox tab settings
Username
Password
Incoming server
address
Your Internet Service Provider (ISP) supplies you
with your username, your password, and its
incoming server address, which identifies the
computer where your incoming email messages
are stored.
Outgoing server
address
Your Internet Service Provider (ISP) supplies you
with its Outgoing server address, which identifies
the computer through which your outgoing email
messages are sent.
Open in full
screen
Select to open messages in full screen portrait
view.
Use SMTP
authentication
Download
If you want to limit the data traffic, you can choose
to receive just Just headers (the sender, subject,
and date only) or set a size limit (if a message is
larger than the Smaller than limit, only the headers
are downloaded). You can download the complete
message later. You can also set a limit to the total
number of messages held in your email account at
any one time.
Some SMTP servers might also require
authentication when sending email. In that case,
select the check box Use SMTP authentication and
enter your User name and Password.
Use Inbox login
details
If the SMTP server accepts using your Inbox login
information for authentication, select the check
box Use Inbox login details.
Schedule
Select Schedule to schedule an automatic
download of your incoming email messages.
Messages that are waiting in your Outbox will not
be sent at the same time.
Email account Advanced tab settings
Secure
connection
Your Internet Service Provider (ISP) will tell you
whether you can use either a Secure connection or
Secure password authentication.
Outgoing mail
port
Normally 25. Do not change unless your ISP
instructs you to.
Use MIME
encoding
MIME encoding is a standard that allows nontextual information (for example graphics) and
accented characters to be sent in email messages.
If you should not wish to Use MIME encoding,
clear the check box.
Control panel
159
Email account Advanced tab settings
SMS tab
Incoming mail
port
Normally 110. Do not change unless your ISP
instructs you to.
Use these settings to set up text messaging and EMS
messaging:
Secure
password
authentication
A secure connection means that all information
(including your username, password, and all
messages) is encrypted to maximize security while
you are connected to the Internet. In contrast,
secure password authentication means that only
your password is encrypted.
To edit an email account
Messaging accounts SMS tab settings
SMS Service
center address
The SMS Service center address is the phone
Character Set
Your network operator may also specify the
Character set.
1. On the Email tab, select the account in the list.
number where your text messages are stored. It is
normally imported from the SIM card but if that
fails, your network operator can provide you with
the service center address.
3. Change your settings as desired.
Messages stored You can set a time limit after which text messages
for
are deleted from the network by choosing a value
in the Messages stored for list.
4. Select Done.
Connection type
2. Select Edit.
Specify if you prefer to use GPRS or GSM
connection as directed by your network operator.
To delete an email account
1. On the Email tab, select the account in the list.
2. Select Delete.
3. Select Yes.
160
Control panel
Tip If you send and receive text messages in several countries,
you can avoid having to change the service center address when
you travel abroad by entering the international dialing prefix
(for example '+') and the appropriate country code for your
network operator.
MMS tab
Use these settings to set up multimedia messaging:
Messaging accounts MMS tab settings
Service center
address
WAP account
The MMS Service center address is the URL to the
server on which your multimedia messages are
stored. Your MMS service provider or your network
operator can provide you with the service center
address.
Specify which of your configured WAP accounts
you wish to use.
• WAP accounts are created in Control panel >
Connections > WAP accounts
Automatic
Download size
and
Smaller than
Select between:
• Off - automatic download is off, you will receive
notifications of incoming messages and have to
download them manually.
• Home only - messages are downloaded
automatically when you are connected to your
home network.
• On - messages are also downloaded automatically
when you are roaming outside your home network.
Set whether or not to have a size limit for incoming
messages:
• No restrictions - the size of the incoming messages
does not matter, all messages will be received.
• Smaller than - messages smaller than the limit will
be received, bigger messages will be deflected.
Advanced settings
Select Advanced to make settings about how your P910i will
send and receive multimedia messages.
MMS Advanced settings tabs
Send
The values you give these settings will be default for all
multimedia messages that you send. You can of course
choose other values for an individual message in Messages.
You can set the Validity period for your messages, that is,
how long they should be available to the receiver.
Maximum is the default.
You can give your messages a Priority of Low, Normal
(default) or High.
You can set Content alert for the multimedia messages you
create to help you check content.
If you select Warning, a warning message is displayed
whenever you add a non-conformant item to a multimedia
message. You have the option to send anyway. If you select
Restricted, the message will not be sent in the situation
described above. Free means no restrictions.
Select the check boxes to provide the function you want:
Hide number prevents the sent message from showing your
number.
Read report requests a read notification from receivers of
your messages.
Delivery report requests a delivery notification from
receivers of your messages.
Reply with history includes the original with your reply.
Control panel
161
MMS Advanced settings tabs
Receive
These settings apply to multimedia messages that you
receive.
Select the Play full screen checkbox, when you want to
play MMS messages in full screen.
Select the check boxes to send a notification message to the
sender when a message is:
• Delivered to you: Allow delivery notification
• Read by you: Allow read notification
You can filter reception of incoming messages by message
type (Advertisements, Information) or from senders not
listed in Contacts (Anonymous senders). Selecting a check
box will filter out messages of that category.
To receive multimedia messages only from senders listed
in your Contacts, select all other check boxes and clear the
check box for Anonymous senders.
Area tab
On the Area tab you make settings related to Cell Broadcast
Services. These include both Area Information and Cell
Information services. The availability of Cell and Area
Information Services is operator-dependent.
Your network may broadcast the area code as cell information.
Your P910i can display it below the network name in the flip
closed standby view.
Area Information is a type of text message that is sent to all
subscribers in a certain network area, for example a local traffic
report.
To enable Cell Information
Select the Cell information check box
To turn Area Information on
1. Check the Area information check box. Received messages
will be automatically stored, and displayed in the list when
dismissed.
2. The list shows all the channels that you have defined on your
P910i. The check box for each channel shows if it is on
(selected, ready to receive messages) or off (cleared, not
active):
To add a new channel
1. Select New.
2. Enter the number of the new channel in the New Channel
dialog. Channel numbers can be from 0 to 999. If there are
too many channels defined, New will be disabled and you will
see a message: Maximum channels on SIM.
Channel numbering is operator-dependent. Please consult
your network operator for information.
To turn a channel on or off
Select the channel in the list and select the check box. To turn it
off, clear the check box.
162
Control panel
To delete a channel
Select Delete. Since deleting a channel cannot be undone, you
will be asked to confirm the delete. Deleting the channel will
also delete any stored Area Information messages for that
channel in your Area Info Inbox.
WAP accounts
Use these settings to set up and manage WAP accounts on your
P910i.
WAP accounts are intended for multimedia messages and for
accessing the Internet through a WAP gateway. (Such gateways
make use of proxy port 9200-9203.) All other proxy settings
should be included in your Internet accounts.
For security reasons, some WAP pages and services, for
example online banking, can only be accessed from a particular
WAP account.
Note You access WAP pages through an Internet Service
Provider (ISP) so, when you create a WAP account, you must
choose one of your existing Internet accounts or first create a
new one.
To create a new WAP account
1. Enter the name of the WAP account.
2. Select the Internet account you want to use. Preferred
indicates the account set as preferred in the Internet setup.
3. If you are going to use a WAP gateway or a proxy, select the
Use Proxy check box.
4. Enter the Address of the gateway or proxy.
5. Enter the Port of the gateway or proxy.
For a WAP gateway use:
–
–
9201 for a normal connection.
9203 for an encrypted secure connection.
The dialog has two tabs: Basic and Preferred.
6. If the gateway/proxy requires Username and Password, which
is very unusual, fill in the last two fields in the dialog.
Basic tab
Preferred tab
The dialog shows a list of all the WAP accounts on your P910i.
You can add a New account to the list and Edit or Delete an
existing account.
Select the check box to set a preferred WAP account. It will be
Internet
used when you use the Open page command in the
application and when a page is opened from another P910i
application. If you do not set a preferred WAP account, the
preferred Internet account will be used when connecting to the
Internet.
Control panel
163
The Other tab
The other tab contains all settings that are not related to the
device or connections. This is also where settings from system
components and add-ons, developed by third-party developers,
will be found.
Security information
Security information is displayed when Certificate manager
cannot be sure of the origin of the page or software. For
example, security information will be displayed if:
• The certificate on a page has expired.
• The identity of a software manufacturer cannot be verified.
Certificate manager
Security information is also displayed when a certificate on your
P910i has:
Digital certificates ensure that the Web or WAP pages you visit,
or any software you install, really are created by the person you
expect.
• Expired.
Certificates may be present on the pages that you view or the
software that you download. Your P910i compares these
certificates with a set of certificates that are stored in Certificate
manager to ensure the authenticity of the page or software. If the
certificates do not match, your P910i informs you, and gives you
the following choices:
• Prevent the page being loaded or the software being installed.
• Continue at your own risk.
The certificates on your P910i have been created and issued by
an independent organization that ensures their authenticity.
164
Control panel
• Been revoked by the independent organization that issued it.
Adding and deleting certificates
Your P910i handles certificates automatically so, most of the
time, you can browse the Internet securely without using
Certificate manager. If you do need to add or delete a certificate,
you will usually be informed by your network operator or
system administrator. You should delete a certificate from
Certificate manager if you are informed, or suspect, that:
• The certificate does not belong to the person who supplied it.
• The certificate was issued incorrectly by the independent
organization that created it.
Type of certificate
The type can be either User or Certificate Authority.
• User certificates contain your identity. This type of certificate
is used when the server asks for client authentication. The
client application requests you to identify yourself by
choosing a user certificate.
When you format a disk, you delete all the information on it,
including any applications that you may have installed. You also
delete all information placed on it by other devices (these
folders are hidden except in File Manager).
IP Security manager
• Certificate Authority certificates contain server details. This
type of certificate is handled by your P910i when the server
only requires server authentication. This means that your
identity remains anonymous.
The IP security manager displays stored policies and only one
policy can be activated at a time.This is used for secure
connections over the Internet, typically to a corporate intranet. If
needed, your company information services department will
supply the necessary information.
Flip settings
There are two types of passwords needed:
Flip keyboard - Specify the keyboard your P910i has on the inside
of the flip.
Enable virtual flip - Select
the check box to use of the Virtual flip
when the flip of your P910i has been removed.
Format disk
This dialog primarily lets you rename and format any Memory
Stick that you install in your P910i. Your P910i comes with one
Memory Stick.
• IP security password: is to be set when activating the very
first policy, that is, this password is only set once, but it is
possible to change it later at any time by tapping the
Password button.
• Activation password: is needed when a policy is activated
for the first time and the supplier of the policy gives this.
Language selection
Use this list of all languages stored on your P910i to change
language. The highlighted entry is the language presently in use.
You can delete all languages except English.
Control panel
165
To conserve storage space only a limited set of languages is
loaded on your P910i at delivery. When you select one of the
languages from the list the unused languages in the set are
deleted from the memory of your P910i. You can, at any time,
download additional languages from www.sonyericsson.com/
support
Secure tokens
Master reset
Your P910i supports the following secure access systems:
Use Master reset to reset your P910i.
Note All user data, as well as pre-installed media files and
application data files (including, for example, backgrounds,
ring signals and pictures), will be deleted and settings will be set
to the state they were, after you selected the language. The
selected local language will be restored.
If you have backed up your user data, you can restore it from the
backup, see ‘Restoring data’ on page 141.
If you need access to a network that requires secure access
(often known as ‘strong authentication’), for example a
corporate intranet, you can set up the Internet account you use to
log in to that network to use secure access and generate the
required one-time password when you make the connection.
• SecureID from RSA
• SafeWord from Secure Computing
It is also possible to add other access systems through thirdparty software.
If you have a separate device or application that requires onetime passwords according to one of these systems, you do not
need a separate hardware token generator (Hard Token). Your
P910i can generate passwords that are not associated with an
Internet account.
You can restore media files and application data files from the
Multimedia for P910i CD, or from the Web.
You manage secure access in your P910i using Secure Tokens.
If you want to keep installed applications, clear the Delete user
installed applications check box.
Each token is associated with one vendor/system and may be
associated with one or more Internet accounts (or none, when
166
Control panel
you use your P910i as a Hard Token). You can configure as
many tokens as needed.
• In
Tip Dialog details when using secure access are vendor, system
and network-specific. You should contact the administrator of
the network you wish to access to get the correct information.
• Throughout your P910i, use folders as you create and receive
information to speed up housekeeping later.
Tasks, delete all completed entries by selecting
Tasks > Delete completed in your list of entries.
Deleting or copying general files
Storage manager
The list shows the applications on your P910i and the space they
occupy. Tapping the Files button lets you manage general files
stored internally on the P910i or on a Memory Stick.
Tap Files to see lists of all stored general file types on your P910i
and the Memory Stick. You can copy files to a specified folder,
delete unwanted files, and launch the appropriate application to
view or play a file in the list.
To delete files or copy files between folders
Deleting information from applications
1. Select Files.
To delete information from an application: select an application
in the list. This application is then displayed. Delete the old or
unwanted entries or information.
2. Select the Type of file to move or delete.
Here are some housekeeping tips for different applications:
• Delete any unwanted recordings as even short ones occupy a
lot of space.
• In
Messages, delete any old messages from your Inbox or
Sent folders.
• In
Calendar, delete all entries in a specified time period by
selecting Calendar > Remove entries in your list of entries.
3. Select the Location folder.
4. Tap one or more check boxes to select the files to copy or
delete.
5. To copy files, tap Copy and select the destination folder.
To delete files, tap Delete. You will be asked to confirm.
Uninstalling applications
If you uninstall an application, you can always reinstall it if you
want to use it later.
Control panel
167
To uninstall applications
1. Select Uninstall.
A list of applications that can be uninstalled is shown.
Note The PIN-G applies to the whole WIM and any items that
do not have a different PIN. This means that no specific items on
the WIM are linked to PIN-G.
2. Select the application to uninstall.
You can change status of a PIN:
3. Select Uninstall.
• Enable PIN A PIN code that is enabled is requested for
authorization of an operation. To proceed with the operation
you must enter the PIN code.
Note You cannot uninstall the standard applications that come
with your P910i.
WIM PIN settings
WIM (WAP Identity Module) is used for performing security
functions, especially to store and process information needed for
user identification and authentication. It is a tamper-resistant
store for private keys, certificates and other items that may
require a PIN for access or modification.
The WIM management dialog consists of a PIN choice list and a
WIM items list.
You can select a PIN from the PIN choice list. The WIM items
list changes content dynamically, displaying only the keys that
are protected by the selected PIN and also have an associated
certificate. Other keys that are protected by the selected PIN but
do not have an associated certificate are not shown in the WIM
item list. This is the case when WIM PIN (PIN-G) is selected.
168
Control panel
• Disable PIN A PIN code that is disabled is not requested to
authorize an operation to proceed.
To change the PIN code
1. Select the PIN you want to change from the choice list.
2. Select Change PIN.
If a PIN code has been blocked, you must unblock it before it
can be used again. Select the PIN and select Change PIN.
Getting started with Internet and Messages
Introduction
Connection type
Before you can use
Internet and
Messages to access the
Internet and send or receive messages, you will need to make
Control Panel.
some user-specific settings in the
When your P910i connects to a service provider, it will use a
GSM or GPRS network provided by a network operator. Many
network operators offer both GPRS and GSM services.
Service provider
The connection type defines which network your account uses
to connect to the Internet. GPRS Internet accounts use the GPRS
network, and Dial-Up Internet accounts use the GSM network.
You will need a service provider to connect your P910i to the
network.The service provider could be:
• An Internet Service Provider (ISP) which connects you to the
Internet.
• An access point provided by your network operator.
• A private service provider such as your company or your
bank.
You will need to enter specific service provider details into your
P910i to set up an Internet account. It can hold the details of
multiple service providers, for example, you may have separate
Internet and corporate accounts.
Your network operator or retailer may have pre-installed
services, check with them.
GPRS
If your network operator supports GPRS, a GPRS Internet
account allows you to:
• Remain permanently connected to the Internet without being
charged for connection time. With a GPRS account, you are
charged for the amount of information you view, download
or send when your are connected to the Internet. Check your
operator for details of your subscription.
• Avoid having to reconnect to the Internet if the connection is
broken.
Dial-Up
For both Dial-Up and High-Speed Dial-Up accounts, you are
charged for the length of time you are connected. If your
network operator supports them, you can increase your
connection speed (at a cost) by setting up a high-speed account.
Getting started with Internet and Messages
169
Automatically set up service
provider and messaging
Accepting new Internet or Messages
settings
The easiest way to set up your P910i is automatically, through
your service provider.
For
of:
Messages settings your P910i supports automatic
setup
When an phone set-up message appears, select it.
• email accounts
• MMS message (Multimedia Messaging Service) settings.
Check your service provider's Web site for information or
contact their support desk and ask about automatic remote
phone set-up of ISP (Internet Service Provider) settings, email
and MMS message settings.
If remote phone set-up is possible, they will send you the phone
set-up messages required by SMS message.
Settings valid for your network operator and one or more of
these services may also be available through the phone setupmessage generator at www.SonyEricsson.com/support
To check that your SMS messaging settings are correct
1. Select
Control panel > Connections > Messaging accounts >
SMS.
A dialog with a brief text and operator message appears on the
screen. You can accept the new settings or leave the message in
the inbox.
If the name of the new account is the same as that of an existing
account you can choose to create a new account with the same
name or replace the existing account.
Note Never accept remote phone set-up messages if you are not
expecting them or are unsure where they have come from.
Manually set up service
provider
As an alternative to setting up an Internet account automatically,
you can enter the settings manually from
Control panel >
Connections > Internet accounts.
2. Check the information, for example the address of the service
center.
170
New phone set-up messages will appear in the Auto setup
account inbox of
Messages. (Phone set-up messages for
email accounts will, however, be found in your SMS message
inbox.)
Getting started with Internet and Messages
First collect all the information you will need. You can obtain
this information from your ISP (Internet Service Provider), or if
you are connecting to a corporate network, your information
services department.
The dialog has four tabs, one for each type of messaging
service:
email
The provider of your email service, or for a corporate
account, your information services manager can provide
you with the necessary details.
All settings are described in ‘Email tab’ on page 158.
To set up a new account follow the steps under ‘To create a
new email account’ on page 158.
SMS
message
Short Message Service
The necessary settings are usually provided on your SIM
card.
All settings are described in ‘SMS tab’ on page 160.
MMS
message
Multimedia Messaging Service
Your MMS messaging provider will be able to provide you
with the necessary information.
Before you set up MMS messaging you need to set up an
Internet account in Control panel > Connections > Internet
accounts and a WAP account in Control panel >
All settings are described in ‘Internet accounts’ on page 153.
To set up a new account follow the steps under ‘To create a new
Internet account’ on page 154.
Manually set up messaging
As an alternative to setting up Messages automatically, you can
enter the settings for the messaging services you want to use
yourself from
Control panel > Connections > Messaging
accounts.
First collect all the information you will need. You can obtain
this information from the following sources:
• If your network operator offers an email service you can get
the necessary details from them.
• Your Internet service provider.
• Your information services manager in the case of connecting
to the corporate network to access your work email account.
Connections > WAP accounts
All settings are described in ‘MMS tab’ on page 161.
Area
Cell Broadcast Service: Area and Cell information
Your network operator will be able to inform you if these
services are available.
All settings are described in ‘Area tab’ on page 162.
• Your network operator in the case of SMS message and Cell
Broadcast Services.
Getting started with Internet and Messages
171
Setting up WAP accounts
A WAP account (sometimes called a WAP profile) defines a
service provider and gateway that should be used when making
a connection to WAP services. You also need a WAP account
when you use MMS message (Multimedia Messaging Service).
First collect all the information you will need. You can obtain
this information from the WAP service provider, or if you are
connecting to a corporate network, your information services
manager.
All settings are described in ‘WAP accounts’ on page 163.
The WAP gateway sits between your P910i and the WAP site
coding and decoding information. You can set up details of more
than one gateway if necessary, for example one for your MMS
messaging, one to access corporate data over WAP, and another
to access your bank's WAP service.
To set up a new account follow the steps under ‘To create a new
WAP account’ on page 163.
The easiest way to set up a WAP account on your P910i is
automatically, through your service provider. Check your
service provider's Web site for information or contact their
support desk and ask about automatic setup. You can also find
more information, and settings for many operators on:
http://www.SonyEricsson.com/support.
Your P910i contains a complete GSM/GPRS modem, so you
can use it to connect your PC to the Internet or corporate
intranet.Your P910i appears to the laptop like a normal modem.
Note You access WAP pages through an Internet Service
Provider (ISP) so, when you create a WAP account, you must
choose one of your existing Internet accounts or first create a
new one.
Using your P910i as a modem
You link the laptop to your P910i using Bluetooth wireless
technology, infrared, or cable (USB or serial).The connection
over the air can be by any of the bearers that your P910i
supports:
• GPRS
• HSCSD (High-speed Circuit Switched Data)
• CSD (Circuit Switched Data).
Manually set up a WAP account
Instead of setting up a WAP account automatically, you can
Control panel > Connections >
enter the settings manually from
WAP accounts.
172
Getting started with Internet and Messages
A Windows modem driver file and a PC utility, the Dial-Up
Networking Wizard, is provided on your Sony Ericsson PC Suite CD.
The wizard will help you configure DUN (Dial-Up Networking)
entries on your PC for GPRS and HSCSD connections.
Once paired with a Bluetooth-enabled laptop, your P910i is
ready to make a connection to the Internet or corporate network.
Since Bluetooth is wire-free and requires no line-of-sight
alignment, you can place the laptop in a comfortable position
and let your P910i remain in your pocket, briefcase, or even be
placed up to 10 meters away.
wireless technology. See ‘Connecting to other devices’ on
page 133.
If you wish to use an infrared link, the range is typically up to
one meter. The two infrared ports must be kept in line of sight, at
an angle of no more than approximately 30 degrees.
To set up a GPRS or HSCSD (High-Speed Circuit Switched
Data) connection using the Dial-Up Networking Wizard
Make sure that you have any information concerning, for
example, phone numbers, names of servers or domains, that the
server that you want to connect to may require.
1. Start the Dial-Up Networking Wizard from the Sony Ericsson
folder of the Start menu on your PC.
The Dial-Up Networking Wizard
2. Choose Create a new Dial-Up connection.
The wizard simplifies creating GPRS DUN connections by
setting the proper values in the PC DUN entry and linking the
entry to one of the GPRS configurations in your P910i. You can
also view and modify the GPRS settings in the P910i.
3. Follow the instructions in the wizard.
For HSCSD DUN entries, the wizard updates the modem
settings such that the specified data rate and type of bearer
(ISDN / Analogue) will be used when you make a DUN
connection.
You can view or change the DUN entries created with the
wizard using the standard Windows DUN user interface.
The Dial-Up Networking Wizard software included in the Sony
be installed in your PC and your P910i
must be connected to the PC via cable, infrared or Bluetooth
Ericsson PC Suite must
To edit a previously created DUN entry
1. Start the Dial-Up Networking Wizard from the Sony Ericsson
folder of the Start menu on your PC.
2. Modify a Dial-Up connection.
3. Select the desired connection from the list.
4. Follow the instructions in the wizard.
To define P910i as a modem
To set up a CSD (GSM Data) or HSCSD connection you will
need to install your P910i as a modem manually.
Getting started with Internet and Messages
173
To set up a Dial-Up entry for CSD or HSCSD
1. On the PC, open the Control Panel.
2. Choose to install a new modem.
3. Choose your P910i as the modem.
4. Select the port where the P910i is connected.
5. Confirm the selection. A new DUN connection has been
created.
Connecting
To connect using a DUN entry created by the wizard
1. If you are connecting by cable, set your P910i to Modem cable
connection mode, see ‘Cable’ on page 152.
2. Use any conventional method to make a connection:
– Click the Desktop shortcut created by the wizard.
– Select the entry from within the system DUN folder.
– Run an application that has built-in support for using
DUN entries (for example a browser or email client).
GPRS - connection information
Icons on the status bar let you overview the information on data
connection calls.
A combined signal strength and GPRS signal icon provides
information on the GPRS service status. The GPRS connection
status appears above the signal strength icon. There are three
states for the icon, unavailable
, available
and
attached
The HSCSD/CSD
and GPRS
icons are displayed during
a data connection. Where GPRS is suspended, for example, the
GPRS suspended state is indicated by a combined icon
There are three states for the GPRS icon: Active
active transferring data (alternates between
and
and suspended
. Any data transfer either received or sent
activates the GPRS active icon for 5 seconds.
Connection information
When you select the data connection icon, during an active data
connection, a menu appears with the choices Information and
Disconnect.
• Select Information to view information on the connection.
• Select Disconnect to end the connection.
174
Getting started with Internet and Messages
GPRS status information
To reset the log of an account
When the signal strength icon is selected, network, GPRS status
information and, if applicable, GPRS error text appear.
1. Select an account in the list.
GPRS data log
To delete or reset the log of several accounts
A new GPRS data log entry is created when a GPRS account
establishes a connection for the first time. It does not wait for
transfer data. If there is an existing data log associated with the
current GPRS connection, this is updated.
The GPRS data log shows a list of GPRS Internet accounts.
Where one account is active or suspended, the relevant status
icon is displayed to the left of the account.
To view information on an account
1. Select an account in the list.
2. Select GPRS data log > Reset.
1. Select the check boxes of the accounts in the list to be deleted
or reset.
2. Select GPRS data log > Reset or GPRS data log > Delete.
Session data
When the connection is deactivated, for example when the
current Internet account is disconnected, the total data sent and
received in the last session is displayed.
The information is displayed for a couple of seconds. To dismiss
the information when the flip is closed, press
2. Information on the account is shown. The data log is updated
dynamically.
Buttons allow you to delete or reset the current data. These
buttons are disabled during an active or suspended
connection.
To delete the log for an account
1. Select an account in the list.
2. Select GPRS data log > Delete.
Getting started with Internet and Messages
175
REFERENCE
Troubleshooting
This chapter consists of a selection of suggestions for solving
possible problems with your P910i. If this does not help, please
try the Knowledge base on the global support site,
www.sonyericsson.com/support. There you also find other
information that can be helpful.
Start-up problems
P910i will not
start
Your P910i also contains help files with additional information.
Access help with the menu option Edit > Help or, in many dialog
boxes, with the help icon
176
Troubleshooting
• Make sure the contacts on the battery and
charger are clean and avoid charging the battery
in extreme temperatures.
• Vehicle Handsfree: check that the P910i is
properly inserted into the holder and check the
fuse in the fuse holder (connected to the battery
cable).
To improve performance, you can update the software of your
P910i. See “Sony Ericsson Update Service” on page 132.
If you need to hand in your P910i for repair, please note that you
may lose information and content that you have saved in your
P910i. You are advised to make a copy of such information
(make a backup) before handing your P910i in for repair.
• Handheld phone: recharge or replace the battery.
Lock problems
Insert card
• Make sure a SIM card is activated and inserted
into your P910i. See ‘SIM card.’ on page 12.
Blocked SIM
card
If your PIN is entered incorrectly three times in a
row, the SIM card will be blocked. You can
unblock it by using your PUK. See ‘SIM card lock’
on page 37.
Device lock
Phone locked is displayed followed by the prompt
Enter lock code.
Your P910i is locked to prevent unauthorized use.
To unlock the P910i:
• Enter your device lock code, 0000 by default,
then press
Key symbol
or
Communication problems
Telephone does
not work
• Make sure the P910i is not set in Flight mode.
The keypad is locked to prevent unintentional key
action.
Press
followed by
to unlock the
keys.
• Your P910i might be busy sending or receiving
data or email.
• Check the settings for forwarding or restricting
calls. See ‘Forward calls’ on page 54, ‘Accept
calls’ on page 55 and ‘Restrict calls’ on page 55.
Indicator light
Flashes red
Does not flash
This indicates that the battery is running low and
soon needs recharging or replacing with a spare.
• With Vehicle Handsfree (VHF) equipment, make
sure that the following are inserted or connected:
Your P910i and its holder, the fuse in the fuse
holder, and/or the external antenna.
If the indicator light at the top of your P910i does
not flash and no network is displayed there is no
network within range. See ‘Telephone does not
work’ on page 177.
• The received signal can be too weak, possibly
because you are being shielded from the signal.
Check your display signal strength indicator.
Move outdoors or up from the ground to obtain a
sufficiently strong signal.
• If Emergency calls only is displayed on the
screen, you are not allowed to use the network
within range. You can, however, usually make an
emergency call using the emergency number.
• If No network is displayed on the screen, you are
in an area that is not covered by a network or the
received signal is too weak.
Cannot hear
incoming call
• Increase the ring signal volume.
• Your P910i is set in silent mode.
• Your P910i is set in Flight mode.
Troubleshooting
177
The person I
am talking to
has a problem
hearing what I
am saying
• Make sure you do not cover the microphone
when you talk. You find the microphone at the
bottom of the phone, next to the connector.
Cannot use
WAP
• Your subscription does not include WAP. Check
with your service provider.
• Your subscription does not include SMS or
MMS. Check with your service provider.
• Check with you service provider that you have
entered the correct Service Center phone
number.
• Check the settings in the Control panel. Contact
you service provider or visit
www.sonyericsson.com/support and use the
MMS phone setup-message generator.
• Make sure that Flight mode is deactivated.
• Phone memory might be full. Delete some
pictures or music, for example.
178
Troubleshooting
• Check with your service provider that your
subscription includes email.
• The settings might not be correct. Enter new
settings. Use the phone setup-message generator
for email on www.sonyericsson.com/support
to send you an auto setup message, or contact
your service provider. See also “Email tab” on
page 158.
• You could be almost out of network range. The
sound improves with a better network
connection.
• The settings are not correct. Enter new settings.
Contact you service provider or visit
www.sonyericsson.com/support and use the
WAP phone setup-message generator.
Cannot send
nor receive
SMS or MMS
Cannot use
email
Fax calls
• Your P910i does not support fax transmission.
Even if your operator subscription supports fax
transmission, fax calls will be rejected. However,
they can be forwarded to another number such as
the office fax number, see ‘Forward calls’ on
page 54 for more information.
• Make sure potential fax callers do not try to send
a fax to your P910i as they can experience a
number of retries before the fax transmission is
stopped.
Problems to connect to a PC or another device
Not possible to
establish
connection
using cable
• Make sure that the Sync Station and cable is
correctly connected to the PC.
• Make sure that the correct COM port on the PC
is enabled. Right-click the P910i link symbol in
the PC taskbar, and select Properties. Select the
USB COM port.
• Make sure that the devices are correctly paired.
Cannot
See ‘Connection via Bluetooth wireless
establish
technology’ on page 134.
connection with
a Bluetooth
• Make sure that the handset or handsfree is
wireless
charged.
technology
• Make sure that the devices are in range with each
handset or
other.
handsfree
• Make sure the device lock is not active.
• Uninstall Sony Ericsson PC Suite. Connect the
Sync Station with the P910i to the PC. Reinstall
Sony Ericsson PC Suite, following the
installation procedure carefully.
Cannot find PC • You can find PC software on
software for
www.sonyericsson.co/support and also on
downloading
local sites.
• Check for Sony Ericsson PC Suite updates on
www.sonyericsson.com/support. If you find a
new version of the program, download it and
install this instead of the old one.
Cannot use my
P910i as a
modem
Cannot transfer Place the P910i in the Sync Station. In the PC,
pictures
open My P910i and browse through the P910i file
system to find the picture.
• First ask your service provider to enable your
data connection.
• Then connect your P910i to your PC with cable,
Bluetooth technology, or infrared. See “Using
your P910i as a modem” on page 172,
“Connecting to other devices” on page 133, and
Knowledge base on www.sonyericsson.com/
support
Cannot transfer • Make sure that Bluetooth wireless technology is
activated.
items with
Bluetooth
• Make sure that the devices are in range with each
wireless
other. Maximum range is 10 meters.
technology
Troubleshooting
179
Cannot
synchronize
with my PC
• Connect to your PC with cable, Bluetooth
technology, or infrared. See “Connecting to
other devices” on page 133.
Storage
Manager
• Select
Applications >
Control
panel > Device > Storage manager.
• Then install Sony Ericsson PC Suite, and make
necessary settings. See “Synchronization and
backup” on page 138 and the help files in Sony
Ericsson PC Suite. See also Knowledge base on
• A list of all applications and their memory
requirements is shown.
• See ‘Deleting or copying general files’ on
page 167 and ‘Deleting information from
applications’ on page 167.
www.sonyericsson.com/support
Memory full
When your P910i has no more space available to
save or store information, the icon
is shown in
the status bar. You must then free up memory to
ensure the proper functioning of the P910i.
• Make sure regular backups are made with
Communications Suite to reduce the risk of lost
or corrupted information.
Storage Wizard • Tap the icon
in the status bar to start the
Storage Wizard, or start it in the application
launcher. Then use the storage wizard to move
items from the P910i internal memory to a
Memory Stick, or remove items from the P910i
memory.
180
Troubleshooting
You can also use the storage manager to free up
memory.
Information in
applications
Use the applications to remove unused or old items
from the P910i internal memory:
WAP history or bookmarks.
• Messages.
• Contacts.
• Call logs.
• Calendar tasks or appointments.
• Jotter notes.
Miscellaneous
Cannot save on
Memory Stick
• You might have a Memory Stick with a lock
switch. Move the switch in the other direction.
• The Memory Stick might be full. Delete some
files on it.
Tap on display
does not work
Cannot change
language
Occasionally you may find that you tap one
item (for example a button or menu option)
but another is activated. Calibrating the
screen ensures that the correct item is
activated. Tap Control panel > Device tab >
Display > Screen tab > Calibrate screen and
follow the instructions.
• The first time you start the P910i you select a
language. All other languages are then deleted, in
order to free memory. You can find all languages
on the Sony Ericsson PC Suite CD. From the
CD, you can install the language you want. You
can find more languages on
www.sonyericsson.com/support
• When you have installed a new language, you
have to turn your P910i off and then on again for
the change to take effect.
Applications
• Close the flip and open it again.
stop responding • Turn off the P910i and turn it on again.
• Remove the battery, wait about 10 seconds, and
insert it again.
• Phone memory might be full. Delete some
pictures or music, for example.
• If the problem continues, do a master reset. See
‘Master reset’ on page 166. All data will be lost.
System failure
In the case of a system failure, your P910i will
flash an animated warning. To recover, please
restart the P910i like this:
• Press and hold the On/Off button for at least 10
seconds to turn the P910i off.
• Restart as normal: Press the On/Off button to
turn on your P910i.
• The wrong keyboard type can be specified in the
Incorrect
control panel. Make sure the correct settings are
character
defined in Control panel > Device tab > Flip
appears when
keyboard key is
settings > Flip keyboard.
pressed
Troubleshooting
181
Guidelines for Safe and Efficient Use
Please read this information before using your mobile phone.
Recommendations
• Always treat your product with care and keep it in a clean and dust-free place.
• Do not expose your product to liquid or moisture or humidity.
• Do not expose your product to extreme high or low temperatures.
• Do not expose your product to open flames or lit tobacco products.
• Do not drop, throw or try to bend your product.
• Do not paint your product.
• Do not use your product near medical equipment without requesting permission.
• Do not use your product when in, or around aircraft, or areas posted "turn off
two-way radio".
• Do not use your product in an area where a potentially explosive atmosphere
exists.
• Do not place your product or install wireless equipment in the area above your
car's air bag.
• Do not attempt to disassemble your product. Only Sony Ericsson authorised
personnel should perform service.
Antenna
Only use an antenna that has been specifically designed by Sony Ericsson for your
mobile phone. Use of unauthorised or modified antennas could damage your
mobile phone and may violate regulations, causing loss of performance and SAR
levels above the recommended limits (see below).
Efficient use
Hold your mobile phone as you would any other phone. Do not cover the top of the
phone when in use, as this affects call quality and may cause the phone to operate
at a higher power level than needed, thus shortening talk and standby times.
182
Guidelines for Safe and Efficient Use
Radio Frequency (RF) Exposure and SAR
Your mobile phone is a low-power radio transmitter and receiver. When it is turned
on, it emits low levels of radio frequency energy (also known as radio waves or
radio frequency fields).
Governments around the world have adopted comprehensive international safety
guidelines, developed by scientific organizations, e.g. ICNIRP (International
Commission on Non-Ionizing Radiation Protection) and IEEE (The Institute of
Electrical and Electronics Engineers Inc.), through periodic and thorough
evaluation of scientific studies. These guidelines establish permitted levels of radio
wave exposure for the general population. The levels include a safety margin
designed to assure the safety of all persons, regardless of age and health, and to
account for any variations in measurements.
Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio
frequency energy absorbed by the body when using a mobile phone. The SAR
value is determined at the highest certified power level in laboratory conditions,
but the actual SAR level of the mobile phone while operating can be well below
this value. This is because the mobile phone is designed to use the minimum power
required to reach the network.
Variations in SAR below the radio frequency exposure guidelines do not mean that
there are variations in safety. While there may be differences in SAR levels among
mobile phones, all Sony Ericsson mobile phone models are designed to meet radio
frequency exposure guidelines.
Before a phone model is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are performed in
positions and locations (that is, at the ear and worn on the body) as required by the
FCC for each model. For body worn operation, this phone has been tested and
meets FCC RF exposure guidelines when the handset is positioned a minimum of
15 mm from the body without any metal parts in the vicinity of the phone or when
used with the original Sony Ericsson body worn accessory intended for this phone.
Use of other accessories may not ensure compliance with FCC RF exposure
guidelines.
A separate leaflet with SAR information for this mobile phone model is included
with the material that comes with this mobile phone. This information can also be
found, together with more information on radio frequency exposure and SAR, on:
www.sonyericsson.com.
Driving
Please check if local laws and regulations restrict the use of mobile phones while
driving or require drivers to use handsfree solutions. We recommend that you use
only Ericsson or Sony Ericsson handsfree solutions intended for use with your
product. Please note that because of possible interference to electronic equipment,
some vehicle manufacturers forbid the use of mobile phones in their vehicles
unless a handsfree kit with an external antenna supports the installation.
Always give full attention to driving and pull off the road and park before making
or answering a call if driving conditions so require.
Personal Medical Devices
Mobile phones may affect the operation of cardiac pacemakers and other
implanted equipment. Please avoid placing the mobile phone over the pacemaker,
e.g. in your breast pocket. When using the mobile phone, place it at the ear
opposite the pacemaker. If a minimum distance of 15 cm (6 inches) is kept
between the mobile phone and the pacemaker, the risk of interference is limited. If
you have any reason to suspect that interference is taking place, immediately turn
off your mobile phone. Contact your cardiologist for more information.
For other medical devices, please consult the manufacturer of the device.
Children
DO NOT ALLOW CHILDREN TO PLAY WITH YOUR MOBILE PHONE OR
ITS ACCESSORIES. THEY COULD HURT THEMSELVES OR OTHERS, OR
COULD ACCIDENTALLY DAMAGE THE MOBILE PHONE OR
ACCESSORY. YOUR MOBILE PHONE OR ITS ACCESSORY MAY
CONTAIN SMALL PARTS THAT COULD BE DETACHED AND CREATE A
CHOKING HAZARD.
Disposing of the Product
Your mobile phone should not be placed in municipal waste. Please check local
regulations for disposal of electronic products.
Power Supply
Connect the AC power adapter only to designated power sources as marked on the
product. Make sure the cord is positioned so that it will not be subjected to damage
or stress. To reduce risk of electric shock, unplug the unit from any power source
before attempting to clean it. The AC power adapter must not be used outdoors or
in damp areas. Never alter the cord or plug. If the plug will not fit into the outlet,
have a proper outlet installed by a qualified electrician.
Emergency Calls
Mobile phones operate using radio signals, which cannot guarantee connection
under all conditions. Therefore you should never rely solely upon any mobile
phone for essential communications (e.g. medical emergencies).
Emergency calls may not be possible on all cellular networks or when certain
network services and/or mobile phone features are in use. Check with your local
service provider.
Battery Use and Care
We recommend that you fully charge the battery before you use your mobile phone
for the first time. The battery should only be charged in temperatures between
+5°C (+41°F) and +45°C (+113°F).
A new battery or one that has not been used for a long time could have reduced
capacity the first few times it is used.
The talk and standby times depend on the actual transmission conditions when
using the mobile phone. If the mobile phone is used near a base station, less power
is required and talk and standby times are prolonged.
• Warning! May explode if disposed of in fire.
• Use only Ericsson or Sony Ericsson branded original batteries and
chargers intended for use with your mobile phone. Other
chargers may not charge sufficiently or may produce excessive
heat. Using other batteries and chargers could be dangerous.
• Do not expose the battery to liquid.
• Do not let the metal contacts on the battery touch another metal
object. This could short-circuit and damage the battery.
• Do not disassemble or modify the battery.
Guidelines for Safe and Efficient Use
183
• Do not expose the battery to extreme temperatures, never above
+60°C (+140°F). For maximum battery capacity, use the battery
in room temperature.
• Turn off your mobile phone before removing the battery.
• Keep out of children's reach.
• Use the battery for the intended purpose only.
• Do not allow the battery to be put into the mouth. Battery
electrolytes may be toxic if swallowed.
Disposing of the battery
Please check local regulations for disposal of batteries or call your
local Sony Ericsson Customer Care Center for information.
The battery should never be placed in municipal waste. Use a
battery disposal facility if available.
Limited warranty
Sony Ericsson Mobile Communications AB, S-221 88 Lund, Sweden, (Sony
Ericsson), provides this Limited Warranty for your mobile phone and original
accessory delivered with your mobile phone (hereinafter referred to as "Product").
Should your Product need warranty service, please return it to the dealer from
whom it was purchased, or contact your local Sony Ericsson Customer Care Center
(national rates may apply) or visit www.sonyericsson.com to obtain further
information.
Our warranty
Subject to the conditions of this Limited Warranty, Sony Ericsson warrants this
Product to be free from defects in design, material and workmanship at the time of
its original purchase by a consumer, and for a subsequent period of one (1) year.
184
Guidelines for Safe and Efficient Use
What we will do
If, during the warranty period, this Product fails to operate under normal use and
service, due to defects in design, materials or workmanship, Sony Ericsson
authorized distributors or service partners, in the country/region* where you
purchased the Product, will, at their option, either repair or replace the Product in
accordance with the terms and conditions stipulated herein.
Sony Ericsson and its service partners reserve the right to charge a handling fee if a
returned Product is found not to be under warranty according to the conditions
below.
Please note that your personal settings/downloads might be lost when the Product
is repaired or replaced.
Conditions
1. The warranty is valid only if the original proof of purchase issued to the original
purchaser by a dealer authorized by Sony Ericsson for this Product, specifying
the date of purchase and serial number**, is presented with the Product to be
repaired or replaced. Sony Ericsson reserves the right to refuse warranty
service if this information has been removed or changed after the original
purchase of the Product from the dealer.
2. If Sony Ericsson repairs or replaces the Product, the repaired or replaced
Product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the property of
Sony Ericsson.
3. This warranty does not cover any failure of the Product due to normal wear and
tear, or due to misuse, including but not limited to use in other than the normal
and customary manner, in accordance with the Sony Ericsson instructions for
use and maintenance of the Product. Nor does this warranty cover any failure
of the Product due to accident, software or hardware modification or
adjustment, acts of God or damage resulting from liquid.
4. Since the cellular system on which the Product is to operate is provided by a
carrier independent from Sony Ericsson, Sony Ericsson will not be responsible
for the operation, availability, coverage, services or range of that system.
5. This warranty does not cover Product failures caused by installations,
modifications, or repair or opening of the Product performed by a non-Sony
Ericsson authorized person.
6. The warranty does not cover Product failures which have been caused by use of
accessories or other peripheral devices which are not Ericsson or Sony
Ericsson branded original accessories intended for use with the Product.
7. Tampering with any of the seals on the Product will void the warranty.
8. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL
IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL SONY ERICSSON OR ITS
LICENSORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL
EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion or limitation of incidental or
consequential damages, or limitation of the duration of implied warranties, so the
preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer's statutory rights under
applicable legislation in force, nor the consumer's rights against the dealer arising
from their sales/purchase contract.
* European Union (EU)
If you have purchased your Product in an EU country you can have your Product
serviced, under the conditions set out above, within the warranty period in any EU
country where an identical Product is sold by an authorized Sony Ericsson
distributor. To find out if your Product is sold in the EU country you are in, please
call the local Sony Ericsson Customer Care Center. Please observe that certain
services may not be possible anywhere other than in the country of original
purchase, for example due to the fact that your Product may have an interior or
exterior which is different from equivalent models sold in other EU countries. It
may not be possible to repair SIM-locked Products.
** In some countries/regions additional information is requested. If so, this is
clearly shown on the valid proof of purchase.
Guidelines for Safe and Efficient Use
185
FCC Statement
Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
S-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony Ericsson type FAB-1021012-BV and FAB-1021012-CN
and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards 3GPP TS 51.010-1, EN 301489-7,
EN 300328, EN 301489-17 and EN 60950, following the provisions of, Radio
Equipment and Telecommunication Terminal Equipment directive 99/5/EC with
requirements covering EMC directive 89/336/EEC, and Low Voltage directive 73/
23/EEC.
Environmental information
•Halogenated flame retardants are not used in cabinets or the
printed wiring board of the phone.
• Power consumption of charger during standby < 0.3W.
Kista, June 2004
Place & date of issue
0682
For more environmental information, look at the Environmental Declaration for
P910i at www.sonyericsson.com
We fulfill the requirements of the R&TTE Directive (99/5/EC).
186
Guidelines for Safe and Efficient Use
Terms and definitions
AU
Format for audio data files .AU files have the suffix .au
bps
Bits per second – rate of data flow.
Bearer
Path over which data flows. Specifically in CSD and HSCSD,
the type of phone link from the GSM network to the server –
PSTN or ISDN.
cHTML
A version of HTML optimized for small devices.
Bluetooth
Bluetooth wireless technology is a secure, fast radio connection
technology. It is a computing and telecommunications industry
specification that describes how mobile phones, computers, and
personal digital assistants (PDAs) can easily interconnect with
each other and with home and business phones and computers
using a short-range wireless connection.
BMP
Microsoft Windows Bitmap. A graphics format defined by
Microsoft supporting 1, 4, 8 or 24 bit color depth. No
compression, so files can be large.
Bookmark
A URL and header/title stored in the phone, enabling the user to
go directly to a Web or WAP page.
CLI
Calling Line Identity. Shows the number of the person calling
you in your mobile phone display. Your P910i will also display
the name and photograph of the caller if they are in Contacts.
You can then make an informed choice as to whether or not to
take the call. Bear in mind that not all numbers can be displayed.
To use this service, it must be supported by your network.
COM Port
Defines a serial/RS-232 port within the Windows environment.
CS
Circuit Switched. Connection from A to B which has a fixed
bandwidth and is maintained over a period of time, for example
a voice phone call.
CSD
Circuit Switched Data. CSD is a GSM service providing a CS
data connection at a rate of 9.6 or 14.4kbps.
Terms and definitions
187
CSS
Cascading Style Sheet. A feature of browsers.
DTMF
Dual Tone Multi Frequency. A method of coding digits as a
combination of two audible tones.
DUN
Dial-Up Networking. The dial-up networking capability in
Windows.
e-GSM
Extended GSM. New frequencies specified by the European
Radio Communications Committee (ERC) for GSM use when
additional spectrum is needed (network-dependent). It allows
operators to transmit and receive just outside GSM's core
900MHz frequency band. This extension gives increased
network capability.
EMS
Enhanced Messaging Service. An extension of SMS enabling
pictures, animations, sound and text formatting to be added to
text messages.
FCC
Federal Communications Commission. US government agency
which regulates radio communications.
188
Terms and definitions
GIF
Graphics Interchange Format. Format for storing images which
also supports animated images. Highly compressed by limiting
the color palette to 16 or 256 colors. It is one of the two most
common file formats for graphic images on the World Wide
Web. The other is JPEG.
GPRS
General Packet Radio Services. A radio technology for GSM
networks that adds packet-switching protocols, shorter setup
time for ISP connections, and offers the possibility of charging
by the amount of data sent rather than by connection time.
GPRS promises to support flexible data transmission rates
typically up to 20 or 30 kbps (with a theoretical maximum of
171.2 kbps), as well as continuous connection to the network.
GSM
Global System for Mobile Communications. GSM is the world's
most widely-used digital mobile phone system, now operating
in over 160 countries around the world.
GSM 900
The GSM system family includes GSM 900, GSM 1800 and
GSM 1900. GSM 900 refers to GSM working on a frequency of
900 MHz.
GSM 1800
Also known as DCS 1800 or PCN, this is a GSM digital network
working on a frequency of 1800 MHz. It is used in Europe and
Asia-Pacific.
your local server. The email is received and held for you by your
IMAP server. You (or your client email receiver) can view just
the heading and the sender of the letter and then decide whether
to download the mail.
GSM 1900
Also known as PCS. Refers to a GSM system running in the
1900 MHz band. Used in the USA and Canada, for instance.
IrDA
The Infrared Data Association is dedicated to developing
standards for wireless, infrared transmission systems between
devices. With IrDA ports, a device such as your P910i can
exchange data with other devices without a cable connection.
IrDA requires line-of-sight transmission.
HSCSD
High-Speed Circuit-Switched Data (HSCSD) is circuit-switched
wireless data transmission for mobile users at data rates of up to
64 kbps.
HTML
Hypertext Markup Language is the set of markup symbols or
codes inserted in a file intended for display on a World Wide
Web browser page. The markup tells the Web browser how to
display a Web page's words and images.
HTTP
HyperText Transfer Protocol. The communications protocol
used to connect to servers on the World Wide Web. Its primary
function is to establish a connection with a Web server and
transmit HTML pages to the client browser.
IMAP4
Internet Message Access Protocol (the latest version is IMAP4)
is a standard client/server protocol for accessing email from
ISDN
Integrated Services Digital Network. Communication protocol
offered by phone companies that permits phone networks to
carry data, voice, and other source traffic. Selecting ISDN for
CSD/HSCSD connections provides quicker call setup.
ISP
Internet Service Provider. An organization that provides access
to the Internet.
JFIF
JPEG File Interchange Format.
JPEG
Joint Photographic Experts Group, best known for the .JPG
format for still image compression.
Terms and definitions
189
MBM
Multiple Bit Map. Symbian OS bitmap format.
MeT
Mobile Electronic Transactions. An initiative founded by
Ericsson, Nokia and Motorola to establish a secure and
consistent framework for mobile transactions.
MIDI
MIDI (Musical Instrument Digital Interface) is a protocol
designed for recording and playing back music on digital
synthesizers that is supported by many makes of personal
computer sound cards.
MIME
Multipurpose Internet Mail Extensions. A protocol defining
how messages are sent on the Internet. For example, MIME is
used to describe how attachments are encoded and what type of
data they contain.
MMS
Multimedia Messaging Service. Logical extension of SMS and
EMS. MMS defines a service enabling sound, images and video
to be combined into multimedia messages. It supports photo
quality pictures, and sounds in WAV, MIDI, AMR, or Melodies
format.
MP3
MPEG-1 Audio Layer-3 is a standard technology and format for
compression a sound sequence into a very small file (about onetwelfth the size of the original file) while almost preserving the
original level of sound quality when it is played.
MPEG-4
The Moving Picture Experts Group, develops standards for
digital video and digital audio compression. It operates under
the auspices of the International Organization for
Standardization (ISO). MPEG-4 goes far beyond compression
methods. Instead of treating the data as continuous streams,
MPEG-4 deals with audio/video items that can be manipulated
independently, allowing for interaction with the coded data and
providing flexibility in editing. MPEG-4 supports a wide range
of audio and video modes and transmission speeds.
OS
Operating System, such as Symbian OS, Linux, Microsoft
Windows.
OTA
Over The Air. A technology for transmission and reception of
application related configuration information in a wireless
communications system.
PC
Personal Computer.
190
Terms and definitions
PCS
Personal Communications Services, often used to describe GSM
1900 networks.
PDA
Personal Digital Assistant. A handheld computer having
functions such as address book, calendar, and so on.
PDF
Portable Document Format. A format created by Adobe for
storing and distributing documents.
Phonebook
A memory in the SIM card where phone numbers can be stored
and accessed by name or position.
PIM
Personal Information Management. Generic term for
applications such as Contacts, Calendar, Tasks, and so on.
PIN
A PIN is a personal identification number.
PNG
Portable Network Graphics. Format for storing images on file
with data compression but without lowering of quality (loss of
information).
POP3
Post Office Protocol 3 is a standard client/server protocol for
receiving email. The email is received and held for you by your
POP server. Periodically, the P910i Messages application can
check your mail-box on the server and download any mail.
Protocol
In information technology, a protocol is the special set of rules
that end points in a telecommunication connection use when
they communicate. Protocols exist at several levels in a
telecommunication connection.
QQVGA
Quarter Quarter VGA, 160 x 120 pixels.
QVGA
Quarter VGA size, typically refers to a portrait oriented screen
240 pixels wide x 320 pixels high.
RS232
A standard for serial transmission between computers and
peripheral devices
SC
Service Center (for SMS).
Service Provider
A company that provides services and subscriptions to mobile
phone users.
Terms and definitions
191
SGML
A generic markup language for representing documents.
SIM
A SIM (Subscriber Identity Module) card is a ‘smart card’,
inserted into GSM phones, that contains your phone account
information. SIM cards can also be programmed to display
custom menus for personalized services, for instance to assist
operators in providing mobile commerce applications.
SMIL
Synchronized Multimedia Integration Language. Used by MMS
to describe how media items are to be played.
SMS
Short Message Service. Allows messages of up to 160
characters to be sent and received via the network operator's
message center to a mobile phone.
SMTP
Simple Mail Transfer Protocol. Protocol used to send email
from an email client via an SMTP server.
SWIM
A SWIM card is a SIM card containing a WIM.
SyncML
SyncML is a universal protocol for data synchronization,
developed by the SyncML Initiative Ltd.
192
Terms and definitions
TCP/IP
Transmission Control Protocol/Internet Protocol. TCP/IP is the
basic communication language or protocol of the Internet. It can
also be used as a communications protocol in a private network
(either an intranet or an extranet).
TLS
Transport Layer Security. Used by Web browsers, for example.
URL
Uniform Resource Locator. Points to a service or information on
the Internet, for example: http://www.SonyEricsson.com
USB
Universal Serial Bus. A plug-and-play interface between a
computer and add-on devices (such as audio players, joysticks,
keyboards, phones, scanners, and printers). With USB, a new
device can be added to your computer without having to add an
adapter card or even having to turn the computer off.
USSD
Unstructured Supplementary Services Data. Narrow-band GSM
data service. For example entering *79*1234# might return the
stock price for stock 1234.
vCal; vCalendar
vCalendar defines a transport and platform-independent format
for exchanging calendar and scheduling information for use in
PIMs/PDAs and group schedulers. vCalendar is specified by
IETF.
used for Internet access, including email, the World Wide Web,
and newsgroups.
vCard
vCard automates the exchange of personal information typically
found on a traditional business card, for use in applications such
as Internet mail, voicemail, Web browsers, phone applications,
call centers, video conferencing, PIMs /PDAs, pagers, fax,
office equipment, and smart cards. vCard is specified by IETF.
WAV
A Wave file is an audio file format, created by Microsoft, that
has become a standard PC audio file format for everything from
system and game sounds to CD-quality audio. A Wave file is
identified by a file name extension of WAV (.wav).
VGA
Video Graphics Array. Graphics standard introduced by IBM,
having a resolution of 640 x 480 pixels.
VPN
Virtual Private Network. A private network that is configured
within a public network. A VPN appear as private national or
international network to the customer, but physically shares a
backbone trunk with other customers. VPNs enjoy the security
of a private network via access control and encryption, while
taking advantage of the economies of scale and built-in
management facilities of large public networks. Today, there is
tremendous interest in VPNs over the Internet, especially due to
the constant threat of hacker attacks.
WAP
Wireless Application Protocol is a specification for a set of
communication protocols to standardize the way that wireless
devices, such as cellular phones and radio transceivers, can be
WBXML
Wireless Binary Extensible Markup Language.
WIM
The Wireless Identity Module is a data module for electronic
identity certificates. It can contain both trusted and client
certificates, private keys and algorithms needed for WTLS
handshaking, encryption, decryption, and signature generation.
The WIM module can be placed on a SIM card, called a SWIM
card.
WML
Wireless Markup Language. A markup language used for
authoring services, fulfilling the same purpose as HyperText
Markup Language (HTML) does on the World Wide Web
(WWW). In contrast to HTML, WML is designed to fit small
handheld devices.
Terms and definitions
193
WTLS
Wireless Transport Layer Security. Part of WAP, WTLS
provides privacy, data integrity and authentication on transport
layer level between two applications.
W3C
The main standards body for the WWW.
xHTML
Extensible Hypertext Markup Language. A reformulation of
HTML 4.01 in XML. Being XML, means that XHTML can be
viewed, edited, and validated with standard XML tools. At the
same time, it operates as well as or better than HTML 4 in
existing HTML 4 conforming user agents.
XML
Extensible Markup Language. An initiative from the W3C
defining an ‘extremely simple’ dialect of SGML suitable for use
on the WWW.
194
Terms and definitions
Technical data
General
Screen
Product
P910i standard version, Latin character set
Screen type
TFT
Size
115 x 58 x 26 mm
Screen size
Weight
155 grams with battery and flip.
Flip closed: 208 x 208 pixels, 40 x 40 mm
Flip open: 208 x 320 pixels, 40 x 61 mm
System and power class
E-GSM 900 Class 4
GSM 1800 Class 1
GSM 1900 Class 1
Pixel size
0.192 x 0.192 mm, or 132 ppi (Pixels Per Inch)
Color resolution
18-bit (262 144 colors)
Screen surface
Touch-sensitive
Antenna
Built in
Illumination
Variable intensity back-light
Speech Coding
HR, FR, EFR supported where available,
for high speech quality.
SIM Card
Small plug-in card, 3V or 5V type
Operating System
Symbian OS v7.0 with UIQ user interface
and applications environment
SDKs
C++, PersonalJava™ , J2ME CLDC/MIDP 2.0,
AppForge™ Microsoft Visual Basic 6 and .NET
Processor
ARM 9
Load formats
Internal User storage
For settings, user data (for example images,
contacts, messages) and third-party
applications: up to 64 MB
C++, Java or VB applications in Symbian SIS
format.
MIDP installation (JAR/JAD) from Browser or
connected PC.
Additional storage
Memory Stick Duo, up to 128 MB
supported. Memory Stick PRO Duo, up to
1 GB supported. 32 MB Memory Stick
Duo supplied, plus adapter.
Security
Support for signed applications.
Operating temperature
–15° to +55° C
Third Party Application Support
Bluetooth wireless technology
Bluetooth compatibility
statement
This product is manufactured to comply
with the Bluetooth specification 1.1.
Coverage area
Up to 10 meters (33 feet)
Technical data
195
Phone
Infrared transceiver
Data transmission rate
Max speed between phone and IrDA
device (that is a PC or another phone)
SIR: up to 115,200 bps
GPRS Maximum Data Rates (kbps)
4+1
CS-1
9.05 kbps
CS-2
13.4 kbps
CS-3
15.6 kbps
CS-4
21.4 kbps
Rx
36.2
53.6
62.4
85.6
Tx
9.05
13.4
15.6
21.4
Speed achieved depends on the Coding Scheme supported by
the GSM Network.
Personal ring
tones supported
formats
Integrated CommuniCorder
Image size
9.6 kbps per time slot
14.4 kbps per time slot
28.8
Tx
14.4
196
9.6
Technical data
640 x 480 pixels (VGA)
320 x 240 pixels (QVGA)
160 x 120 pixels (QQVGA)
176 x 144 pixels (QCIF) (video)
Color depth
24 bit (16 million colors)
Storage format
Still pictures: JPEG/JFIF, 3 quality (compression)
levels, user-selectable.
Video: 3GPP/MPEG4 video with AMR sound.
HSCSD Maximum Data Rates (kbps)
2 + 1 Rx 19.2
Sound clips as personal ring tones and default ring
tone:
MP3, AMR, AU, iMelody, MIDI, RMF (Beatnik)
and WAV.
Pictures (Image viewer)
Formats
BMP, GIF (including animated), JPEG, MBM, PNG,
WBMP
Sharing via
Infrared, Bluetooth wireless technology, MMS
message, email, PC file transfer, Memory Stick
Video player
File Format
MP4 (MPEG4), 3GP (3GPP PSS)
Streaming
transport
RTSP according to 3GPP
Music player
File Format
MP3, MP4, M4A,WAV, AAC, AU, AMR and
G-MIDI level 1 with 24 voices polyphony, RMF,
iMelody
Integrated browser
Markup languages HTML 3.2 (excluding features not relevant to a
small screen device)
WML 1.3
WBXML
xHTML Basic
xHTML Mobile Profile
cHTML
WAP version
2.0
Scripting
Compiled WML scripts
Style sheets
WCSS
Images
BMP, WBMP, GIF (including animated), JPEG,
PNG
Security
WTLS Class 1, 2, 3
WTLS Cipher RC5 with key length 128
TLS/SSL
TLS Cipher RC4 with key length 128
SignText
WIM
WIM interface including SIM-WIM (SWIM)
Cache
15 - 120kbyte user-configurable; 30kbyte default.
Content download OMA Download OTA ver 1.0
SMS
Bearer
GSM and GPRS
Concatenated
Up to 255 messages
MMS
Image formats
BMP, GIF (including animated), JPG, WBMP,
PNG
Audio formats
3GPP, AMR, AU, iMelody, MIDI, MP3, RMF,
WAV
Video formats
3GP (3GPP PSS), MP4 (receive only), Packet
video, SDP
EMS
Supported items
Sounds, Melodies, Pictures, Animations
Technical data
197
Email
Incoming mail server support POP3, IMAP4
Outgoing mail server support SMTP
Content coding
MIME compliant
Security
SMTP authentication, SSL encrypted
IMAP4 and SMTP
Attachments
Receiving and sending
Document viewer and editor
Microsoft® Word
Microsoft® Excel
Adobe® Acrobat® (PDF)
Note The installed viewer for Microsoft Word documents
cannot be used to view files in Rich Text format (.RTF)
198
Technical data
Index
Accented letters
- handwriting 2, 35
Accepted callers 55
Accessories 24
Add to contacts 54
Alarm tones 144
Alarms 121
ALS
- settings 58
- support 51
Antenna 182
AoC - Call meter settings 57
Application shortcuts 142
Applications
- flip closed 15
- installing 130
- overview 25
- removing 132, 167
Area information 162
Attachments 95
Backgrounds 142, 146
Backing up data 140
Battery
- charging 13
- information 183
- inserting 12
- removing 12
Bluetooth wireless
technology 134, 151
- bluetooth share 137
- headphone 136
- pairing 135
- passcodes 136
Bookmarks 81
Browser view 78
Browsing the internet 77
Cable 152
Calculator 118
Calendar 108
- creating entries 108
- managing entries 109
- preferences 110
- sending and receiving
entries 110
Calibrate 146
Call costs 57
Call list 47
Call waiting 55
Calling cards 56
Calls
- answering 42, 45
- conference 46
- emergency 42
- flip closed 40
- flip open 43
- forwarding 54
- incoming 44
- international 41
- making 40, 43
- options 43, 45
- preferences 53
- rejecting 42, 45
- restricting 55
- retrying automatically
44
- speed dialing 44
- two or more 45
- voice control 53
Camera
- settings 63
Care instructions 182
Cell information 162
Certificate manager 164
Chat settings 152
Chess 85
CommuniCorder
- settings 63
- taking pictures 61
Communicorder
- recording video clips 59
Conference calls 46
Connecting
- via Bluetooth wireless
technology 134
- via infrared port 134
- via SyncStation 133
Connection type 169
Connectivity software 133
Contacts 101
- adding images 143
- creating and managing
contacts 104
- to add a contact 103
- to delete a contact 103
Control panel 145
Corporate phone services 51
- set up 57
Index
199
D
Data backup 140
Data restore 141
Data storage 31
Date settings 119
Demo application 25
Device lock 38, 177
Dial-Up Networking Wizard
173
Disk formatting 164
Display 145
Disposing of the battery 184
Drawing pictures 115
Driving 183
DTMF 49
- turning on 43
Editing
- spreadsheets 123
- Word documents 123
Efficient use 182
Email 87, 94, 158
Emergency calls 42
EMS 89
Entering text
- flip closed 32
- flip keyboard 36
200
Index
- flip open 33
- handwriting 34
- keyboard on the screen
34
Extended characters
- handwriting 36
Handwriting recognition 34
- accented letters 2, 35
- extended characters 36
- letters 2, 35
- numbers 2, 35
Help texts 31
File manager 125
Find 30
First time start-up 14
Flight mode 49
Flip
- virtual 17
Flip closed 15
Flip open 16
Folders 28
Folders in Messages 88
Formatting disks 164
Forwarding calls 54
Icons 21
Image editor 66
Image status 62
Importing phone book
entries 14
Incoming call picture 53
Incoming calls 44
Increasing ring 148
Indicator light 177
Indicators 21
Infrared 134, 153
Inserting symbols 32
Installing applications 130
International calls 41
International settings 147
Internet 77
- accounts 153
- bookmarks 81
- browser view 78
- browsing 77
Games 85
General functions 28
Getting help 31
GPRS 169, 174
Handsfree 54
- signing documents 81
- user authentication
request 81
Introduction to P910i 9
IP security manager 164
Jog Dial 19
Jotter 114
- creating and editing
notes 114
- drawing pictures 115
- managing notes 115
- sending and receiving
notes 115
Key functions 118
Key lock 39
Keyboard
- flip keyboard 36
- on screen 34
Keypad functions 20
Languages 165
Letters
- handwriting 2, 35
Light intensity 142
Local synchronization 138
Locations 120
Lock problems 176
Locks 37
- device 38
- key lock 39
- SIM card 37
Making a call 102
Media buffer 71, 72
Medical Devices 183
Memory Stick Duo 22
- adapter 23
- formatting 164
Messages
- accounts 89, 157
- attachments 95
- email 94
- MMS 90
- multimedia messages
90
- SMS 89
- text messages 89
Messaging
- accounts 89, 157
MMS 87, 161
Mobile music 73
Modem 172
Multimedia for P910i 129
Multimedia messages 87, 90
Music player 73
Navigation 17
Networks 152
Notes 114
- creating and editing 114
- managing 115
- sending and receiving
115
Numbers
- formats 120
- handwriting 2, 35
Off 14
On 14
Online services 127
Options menu 16
Owner card 107
P910i Locks 37
P910i overview 11
P910i package 10
PC connectivity software
133
PC Suite for P910i 128
Pdf documents
- viewing 122
Personalizing your P910i
142
Phonebook
- importing entries 14
Pictures 64
- drawing 115
- sending and receiving
65
- taking 61
- viewing 64
PIN 37
PIN2 38
PUK 37
Radio Frequency 182
Recording sounds 116
Remote synchronization 139
Removing applications 132
Restoring data 141
Restricting calls 55
Retry to call 44
Ring signals 143
Ring volume 148
SAR 182
Screen areas 18
Screen saver 143
Secure tokens 166
Security information 164
Self timer - picture 62
Self timer - video 60
Send as 30
Sending notes 115
Service provider 169
Services 25
Settings 32
Setup Wizard 14
Shortcuts 168
Silent mode 48
SIM card 12
SIM card lock 37
SMS 87, 89, 160
Solitaire 85
Sony Ericsson Update
Service 132
Sony Image Station 67
Sound files
- loop 74
- managing 74
- playing 73
Sound notification 144
Index
201
Sound recorder 116
Sound recordings 116
- sending and receiving
117
- using as ring signals
117
Sounds and alerts 147
Speakerphone 48
Speed dial
- making a call 44
- set-up 48
Spreadsheets
- editing 123
- viewing 122
Standby view 15
Start-up 14
Storage Manager 180
Storage manager 167
Storage Wizard 180
Storing data 31
Streaming 70
Symbols 32
Synchronization
- local 138
- remote 139
T9® text input 32
202
Index
Tasks 111
Technical data 195
Text input 32, 147
Text messages 89
Themes 142
Time 119
- alarms 121
- locations 120
- number formats 120
- settings 119
- workdays 120
Time & date settings 164
Tone based services 49
Touchscreen lock 39
Transfer items with Send As
30
Troubleshooting 176
TTY settings 57
TTY support 50
Turning on and off 14
Uninstalling applications
132, 167
Updating the software 132
User greeting 150
Vibrating alert 45
Video 59
Video clips
- downloading 71
- managing 69
- playing 68
- saving 70
- sending and receiving
70
Video status 61
Viewing
- spreadsheets 122
-pdf documents 122
-Word documents 122
Virtual flip 17
Voice control 53
- making a call 41
Voicemail 56
Volume
- changing 43
Wallpaper 142, 146
WAP accounts 163
Warranty 184
WIM management 168
Word documents
- viewing 122
-editing 123
Zoom the screen 31
Zooming 29

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:07:07 10:07:55+03:00
Create Date                     : 2004:07:06 10:32:12Z
Page Count                      : 202
Page Mode                       : UseOutlines
About                           : uuid:817034fb-a8e3-4b1c-b378-183ebf6f2d16
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Mod Date                        : 2004:07:07 10:07:55+03:00
Creation Date                   : 2004:07:06 10:32:12Z
Author                          : Sony Ericsson Mobile Communications AB
Creator Tool                    : FrameMaker 6.0
Metadata Date                   : 2004:07:07 10:07:55+03:00
Document ID                     : uuid:2fde1052-06c7-4be3-b9ce-9f39e46e0d59
Format                          : application/pdf
Title                           : P910i User Guide
Creator                         : Sony Ericsson Mobile Communications AB

EXIF Metadata provided by EXIF.tools