Sony KDL 26S2010 26S2000/KDL 26S2010/KDL 26S2020/KDL 32S2000/KDL 32S2010/KDL 32S2020/KDL 32V2000 User Manual Installing The Wall Mount Bracket KDL26S2010 Instal
User Manual: Sony KDL-26S2010 Installing the Wall-Mount Bracket
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
KDL-26S2000 KDL-26S2010 KDL-26S2020 KDL-32S2000 KDL-32S2010 KDL-32S2020 KDL-32V2000 Installation dimensions table*1 . KDL-26S2000 KDL-26S2010 KDL-26S2020 KDL-32S2000 KDL-32S2010 KDL-32S2020 KDL-32V2000 Installing the Wall-Mount Bracket To Customers: Center line of the screen when installed on the wall For product protection and safety reasons, Sony strongly recommends that wall-mounting of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. Hole to secure the bracket screw temporarily TV Model KDL-26S2000 KDL-26S2010 KDL-26S2020 TV Dimensions Unit: mm Length for each mounting angle Unit: mm A B C D E 658 470 94 22 265 KDL-32S2000 KDL-32S2010 KDL-32S2020 792 546 99 19 304 KDL-32V2000 792 546 99 19 304 *1 *2 F G H 0° 150 183 287 20° 257 140 316 0° 155 262 284 20° 288 213 316 0° 155 262 284 20° 291 213 310 Mounting angle (α°) Your KDL-26S2000/KDL-26S2010/KDL-26S2020/KDL-32S2000/KDL-32S2010/ KDL-32S2020/KDL-32V2000 can be wall-mounted using SU-WL31 Wall-Mount Bracket (sold separately). Please provide your licensed contractor with this installation supplement as well as the Instructions (supplied with the SU-WL31 Wall-Mount Bracket). Read these documents carefully for safety and proper installation. Weight (× 4)*2 11 kg (44 kg) To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product. 15 kg (60 kg) 15 kg (60 kg) Installation dimensions may differ according to how the TV is installed. The wall must be strong enough to support at least four times the weight of the TV that you are installing. Printed in Slovak Republic –4– © 2006 Sony Corporation 2-684-954-11(1) Installing the TV on a wall Step 1: Checking the parts required for the installation The TV can be installed on a wall by attaching a WallMount Bracket (sold separately). Verify your TV’s model number and be sure to use the bracket specified for your model only. Refer to the Steps on this manual along with the Instructions supplied with the SU-WL31 Wall-Mount Bracket, to properly carry out the installation. Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation. Open the Wall-Mount Bracket package and check the contents for all required parts along with the Instructions. Step 5: Preparing for the installation of the TV 3 Align the holes on the Mounting Hook Units with the corresponding holes on the rear of the TV. Then secure them to the TV using four screws (supplied with SU-WL31). Before detaching the Table-Top Stand, disconnect all the cables from the TV. 1 The supplied screws (+PSW5 × L16) Rotate the cable holder by 90 degrees, and pull it out. Cable holder Step 2: Changing the position of the arm bases Refer to the Instructions for the SU-WL31. Mounting Hook Units Step 3: Deciding on the installation location Note When using an electric screwdriver to tighten the screws, the torque must be approx. 2 N•m (20 kgf•cm). Soft cloth Decide where you want to install your TV. Turn to the back cover of this manual for the TV installation dimensions and determine the location. Refer to the Instructions for the SU-WL31. 2 Remove the screws and detach the TableTop Stand from the TV. Step 6: Installing the TV on the Plate Unit Refer to the Instructions for the SU-WL31. Step 4: Installing the Plate Unit on the wall 1 Connect the mains lead and cables to the corresponding sockets on the rear of the TV. For details on the cable connection, refer to the Operating Instructions for your TV. 2 Install the TV onto the Plate Unit. Refer to the Instructions for the SU-WL31. Table-Top Stand Notes • Lay the display face down on a stable and level surface with the Table-Top Stand hanging over the edge of the surface. Having the display face and the base of the Stand on the same level surface will create an unstable working condition and can damage the TV. • To prevent damaging the surface of the LCD display, place the TV on a soft cloth. –2– –3–
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Page Mode : UseOutlines XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2006:03:02 19:45:06+09:00 Create Date : 2006:03:02 19:32:22+09:00 Metadata Date : 2006:03:02 19:45:06+09:00 Format : application/pdf Title : KDL-26S2000/KDL-26S2010/KDL-26S2020/KDL-32S2000/KDL-32S2010/KDL-32S2020/KDL-32V2000 Creator : Sony Corporation Document ID : uuid:56408c9e-421e-4a81-a9a6-cced7ecba609 Instance ID : uuid:17e80a2c-b470-47db-99d4-3272edbc5485 Page Count : 2 Author : Sony CorporationEXIF Metadata provided by EXIF.tools