Sony PM-0320 GSM/UMTS Mobile Phone with WLAN, BT, RFID User Manual User Guide
Sony Mobile Communications Inc GSM/UMTS Mobile Phone with WLAN, BT, RFID User Guide
UserManual.wiki
>
Sony
>
PM-0320 User Manual
>
User Guide
Contents
1.
User Manual_Safety Leaflet
2.
User Manual_SAR Leaflet
3.
User Guide
User Guide
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![IntroductionThank you for your purchase of "SO-04E".For proper use of the SO-04E, read this manual carefully before and while you use the SO-04E.About manuals of SO-04EIn addition to this manual, the operations of SO-04E are described in "クイックスタートガイド (Quick Start Guide)" (in Japanese only) and "Instruction Manual" application of the terminal (in Japanese only).●"クイックスタートガイド (Quick Start Guide)" (Supplied accessories)The initial operations and settings after purchasing the terminal, screen view contents and operations of main function are explained. (In Japanese only)●"Instruction Manual" (Application of the terminal)Similarly to this manual, operations and settings of each function are explained. To use "Instruction Manual" application, from the Home screen, tap and [Instruction Manual]. When using for the first time, download and install the application according to the onscreen instructions. You can use the application as an electronic book. You can also shift to actual operations by tapping the description in the contents or view reference contents.❖Note･For downloading or updating the application, a high packet communication charge will be applied because of a large amount data communication. For this reason, subscription of packet flat-rate service is highly recommended.●"Instruction Manual" (PDF file)Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website.http://www.nttdocomo.co.jp/english/support/trouble/manual/download/index.html* You can download the latest information of "クイックスタートガイド (Quick Start Guide)" (in Japanese only). The URL and contents are subject to change without prior notice.❖Note･Reproduction or reprint of all or part of this manual without prior permission is prohibited.･Important information for SO-04E is posted in the following website. Be sure to check before using.http://www.sonymobile.co.jp/support/use_support/product/so-04e/(In Japanese only)](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-2.png)
![1Operation descriptionsIn this manual, each key operation is described with P, x, y, r, m. And selection operations of the icons or function items on the touch screen are described as follows.❖Information･In this manual, the instructions are described with the default Home screen. If you set the other application to the home screen, the operations may differ from the descriptions.･Display examples and illustrations used in this manual are just images for explanations and may be different from actual ones.･In this manual, the easier procedure is described for the functions and settings which have multiple operating procedures.･Please note that "SO-04E" is called "the terminal" in this manual.･In this manual, explanations for "docomo" as Home application are provided. To switch the Home applications, see "Learning Home screen" (P.74).Description OperationFrom the Home screen, tap and tap [Settings]u[About phone].From the Home screen, tap (Applications button), and then tap "Settings" on the next screen and "About phone" on the following screen in order.Touch and hold an icon.Keep touching an icon longer (1-2 seconds).](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-3.png)
![6Contents/Precautions･The terminal automatically performs communication for synchronizing data, checking the latest software version, maintain connection with the server, etc. If you transmit a large amount of data such as downloading applications or watching movie, a packet communication charge becomes high. Subscription of packet flat-rate service is highly recommended.･Depending on the applications or service you use, packet communication fees may be charged even in Wi-Fi communication.･Public mode (Driving mode) is not supported.･Setting the terminal to Silent mode does not mute sounds for shutter, playback of video or music, alarm, dial pad touch tones during a call, sound emitted when tapping [End call], etc.･The names of the operators are displayed on unlock screen (P.41).･To check your phone number (own number), from the Home screen, tap and tap [Settings]u[About phone]u[Status] to see "My phone number".･To check the software version, from the Home screen, tap and tap [Settings]u[About phone].･You can perform software update by downloading an update file with a PC via Internet and connecting the PC to the terminal. For details, see "Connecting to a PC and updating" (P.263).･By some software updates, the operating system (OS) may be version-upgraded for improving the terminal quality. For this reason, you always need to use the latest OS version. And some applications that used in the previous OS version may not be available or some unintended bugs may occur.･You can use the terminal only with docomo mini UIM card. If you have a UIM or FOMA card, bring it to a docomo Shop to replace.If you use a docomo mini UIM card (red), you cannot use some Osaifu-Keitai compatible services such as international use. Bring it to a docomo Shop to replace in February, 2013 (scheduled) or later.･Set the screen lock to ensure the security of your terminal for its loss. For details, see "Screen lock" (P.152).](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-8.png)
![22Contents/Precautionsradio stations, contact "General Inquiries" on the last page.･5GHz device cautionsThe following channel numbers and frequency bands are available in Japan.5GHz wireless LAN device is prohibited to use outdoor by Law.■ FeliCa reader/writer function precautions･FeliCa reader/writer function of the terminal uses weak waves requiring no licenses for radio stations.･It uses 13.56 MHz frequency band. When using other reader/writers in your surroundings, keep the terminal away sufficiently from them. Before using the FeliCa reader/writer, confirm that there are no radio stations using the same frequency band nearby.■ Note･Do not use altered terminal. Using an altered device is a violation of the Radio Law.A "Technical Conformity Mark " shown on the terminal certifies that the terminal meets technical regulations for specified radio equipment that are based on the Radio Law. The mark can be checked by the following step.From the Home screen, tap and tap [Settings]u[About phone]u[Legal information]u[Certificates].If you remove the screws and alter the inside of the terminal, the technical regulations conformity certification becomes invalid.Do not use the terminal with the certification invalid, as it is a violation of the Radio Law.Channel number (Ch) Frequency band (MHz)5.2GHz band36 5,18040 5,20044 5,22048 5,2405.3GHz band52 5,26056 5,28060 5,30064 5,3205.6GHz band100 5,500104 5,520108 5,540112 5,560116 5,580120 5,600124 5,620128 5,640132 5,660136 5,680140 5,700](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-24.png)
![33Before Using the TerminalFor opening/closing microSD card slot cover, see "To ensure water resistant/dust resistant" (P.24, P.25).1Open the microSD card slot cover, check the direction of the microSD card, and slowly insert it straight into the slot until it clicks.･Insert the microSD card with metal contacts side up.2Close the microSD card slot cover, firmly press part ( ) and make sure that there are no gaps between the terminal and cover.When removing the microSD card, make sure to unmount (disable to be read or written) the card beforehand.1From the Home screen, tap and tap [Settings]u[Storage]u[Unmount SD card]u[OK].･If a microSD card is unmounted, " SD card safe to remove" shown on the status bar notifies that the microSD card become unable to be read or written.Inserting microSD cardHoldermicroSD cardRemoving microSD card](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-35.png)
![36Before Using the Terminal･The internal battery is a consumable accessory. The usage duration of the battery per one charge decreases gradually each time the battery is recharged.･When the usage duration per one charge becomes about half of a new battery, the life of the internal battery is assumed to be almost over.･Watching 1Seg etc. for a long time while charging may shorten the lifetime of the internal battery.･To check internal battery performance, from the Home screen, tap and tap [Settings]u[Xperia™]u[Battery life].･An orange card is inserted in the tray by default. Make sure to remove the orange card before charging. The orange card prevents the terminal from being charged.･It is recommended to use the AC Adapter 04 (optional) for charging.･The AC Adapter 04 (optional) is compatible with AC 100 V to 240 V. For using the terminal overseas, a plug adapter that fits the electrical outlets in the country you stay is needed. Do not use an electrical transformer for overseas use to charge the terminal.･Use a compatible AC adapter or microUSB cable for charging (P.250). If you use a charger other than the compatible one, charging may not be available or operations may not be performed correctly.･Insert and remove the AC adapter cable or microUSB cable slowly and evenly so that excessive force is not applied.･When you start charging, notification LED on the terminal turns red/orange/green, and green light indicates that the battery level has reached 90 % or more. To check the status of charging, see the status bar at the top of the screen or from the Home screen, tap and tap [Settings]u[About phone]u[Status] to see "Battery level". When charging is complete, battery level is displayed as "100%" at the status bar or "Battery level", and "Charged." appears on the unlock screen (P.41).･When you start charging with the terminal powered off, the power turns on. However, you cannot operate the terminal. Power off the terminal in a place where the use is prohibited such as in airplane or hospital for this reason.Internal battery lifeCharging](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-38.png)
![39Before Using the TerminalWhen using Micro USB Cable 01 (optional) for charging, do the following procedures.For opening/closing microUSB jack cover, see "To ensure water resistant/dust resistant" (P.24, P.25).1Open the microUSB jack cover and insert the microUSB plug of the microUSB cable straight into the microUSB jack of the terminal, with the USB symbol ( ) facing up.2Insert the USB plug of the microUSB cable into a USB port of a PC.･Notification LED lights on the terminal. For the notification LED for charging, see "Notification LED" (P.46).･When "PC Companion software" screen appears on the terminal, tap [Skip].･When a screen for new hardware detection etc. appears on the PC, select "キャンセル (Cancel)".3When the charging is complete, remove the USB plug of the microUSB cable from the USB port of the PC.4Remove the microUSB plug of the microUSB cable evenly from the terminal.5Close the microUSB jack cover, firmly press it and make sure that there are no gaps between the terminal and cover.❖Note･Installation of an MTP driver to a PC is required when charging the battery with a Microsoft Windows XP PC, because "USB connection mode" (P.172) is set to "Media transfer mode (MTP)" by default. Install Windows Media Player 10 or later to install an MTP driver.･If you connect the microUSB cable to the USB jack of the terminal for charging etc. with the terminal powered off, the terminal is powered on and notification LED lights, though operations are not available. Be careful not to connect with the microUSB cable in a place where the use is prohibited such as in an airplane or hospital.･Check the connecting direction to connect correctly. Wrong connection may cause damage.Charging with a PC](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-41.png)
![40Before Using the Terminal1Press and hold P for over a second.･The terminal vibrates and unlock screen appears after a while.2Unlock the screen.･For unlocking the screen by default, see "Unlocking the screen" (P.41).❖Information･An orange card is inserted in the tray by default. Make sure to remove the orange card before turning the power on. The orange card prevents the terminal from being powered on.･For the first time you turn on the terminal, flick (swipe) up/down the screen to unlock the screen and make initial settings (P.42).･If you have activated the screen lock (P.152) or SIM card lock (P.151), unlock screen/PIN code entry screen appears when turning power on. For unlocking the screen lock, see "Unlocking the screen lock" (P.153), and for PIN code entry, see "Entering the PIN code when powered on" (P.151).1Press and hold P for over a second.2Tap [Power off ].3Tap [OK].Turning power on/offTurning power onTurning power off](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-42.png)
![42Before Using the TerminalFor the first time you turn on the terminal, flick (swipe) up/down the screen to unlock the screen and follow the onscreen instructions to make initial settings.1Tap [English (United States)]u[Done], and tap .･After this step, follow the onscreen instructions to make the following settings, and tap or [Finish].-Connect to a Wi-Fi network- Connecting to Sony Entertainment Network- Set accounts and auto-sync- Select preferred applications2Tap when initial setting screen for docomo service appears.･After this step, follow the onscreen instructions to set up below, and tap .- Select whether to install all apps now or later- Select whether to set Osaifu-Keitai settings- Set docomo apps password settings- Set whether to respond when receive a request of location search3Tap [OK].･Instruction guide for the Home screen appears. Tap [OK]/[Do not show this again] to display the Home screen.❖Information･To change the language later, from the Home screen, tap , then tap [Settings]u[Language & input]u[Language]. To set functions, from the Home screen, tap , then tap [Settings]u[Setup guide]/[docomo service].･Make sure that the data connection is available (LTE/3G/GPRS) or Wi-Fi network is connected before setting up online services. For checking the connection status, see "Status icon" (P.43).･You can use the terminal without creating your Google account, however the services such as Google Talk, Gmail, Google Play, etc. are not available.A status bar appears at the top of the screen. In the status bar, the terminal status and notification are displayed. Notification icons appear on the left side, and status icons appear on the right side of the status bar.Initial settingsStatus barStatus bar](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-44.png)
![46Before Using the Terminal1On the Notification panel, tap [Clear].❖Information･Flick left or right a notification on the notification panel to delete from the list.･Some notifications cannot be cleared.Notification LED provides information on the terminal status, incoming calls, mail reception, etc.* The LED flashes when the unlock screen is displayed, backlight is turned off or unlock preference is set to None.Clearing contents on the Notification panelNotification LEDLED statusStatus IndicationRedIndicate that the battery level is 14% or less while the battery is being charged.Flashing redThe remaining battery level is 14% or less.GreenIndicate that the battery level is 90% or more while the battery is being charged.Flashing greenIndicate a new Gmail arrival.*Flashing pale purpleIndicate missed calls/new messages (SMS) exist.*OrangeIndicate that the battery level is 15% - 89% while the battery is being charged.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-48.png)
![47Before Using the Terminal❖Information･When charging starts with the power off, notification LED lights red and when the battery level is displayed on the screen, notification LED lights in the color corresponding to the battery level.･When the battery level becomes 14％ or less, "Connect charger" appears. Tap [Battery info] to check battery usage or set Power Saver (P.144).* In this manual, each key icon operation is described with x, y, r.Precautions on using touch screen･Touch screen is designed for being touched lightly with fingers. Do not push it forcibly with a finger or press it with sharp objects (nail, ballpoint pen, pin, etc.).･Touching the touch screen may not work in the following cases. Note that it may cause malfunction.- Operation with gloved hands- Operation with tip of fingernail- Operation with foreign object on the screen- Operation with protective sheet or seal on the screen- Operation on the wet touch panel- Operation with fingers wet with sweat or waterOperations on the touch screen■ TapTouch an item such as icon or menu with your finger lightly and release it.･Double-tap means tapping twice quickly.■ Touch and holdTouch and hold an icon or menu item long.■ Flick (Swipe)Touch the screen and flick up/down/left/right.Basic operationsBasic key icon operationxBack Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc.yHome Go to the Home screen.Touch and hold the icon and drag to to activate "しゃべってコンシェル (Shabette concier)" or "Google" app.rRecently used appsDisplay recently used applications in thumbnail list to activate or delete an application from the list (P.88). Also, use or set small apps (P.88).xx y rUsing the touch screen](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-49.png)
![48Before Using the Terminal■ DragTouch the screen, drag to the desired position and release the finger.■ ScrollWhen whole content cannot be displayed, flick up/down/left/right displayed content to scroll (move) the display position.■ PinchTouch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance. On some screens, pinch-out to zoom in and pinch-in to zoom out.You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation.1Drag the status bar downwards.2Tap [Auto rotate].･When the setting is enabled, appears.❖Information･Even when you change the orientation of the terminal, the screen may not change to landscape view depending on the screen such as Home screen, etc.･To switch the screen automatically between landscape and portrait view, from the Home screen, tap , then tap [Settings]u[Display] and mark [Auto-rotate screen], or from the Home screen, tap , then tap [Settings]u[Accessibility] and mark "Auto-rotate screen".Switching portrait/landscape view automatically](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-50.png)
![49Before Using the Terminal1Drag the status bar downwards.2Tap [Sound].･Tap to activate silent mode (vibration) and tap to activate silent mode (mute). Tap to cancel silent mode.❖Information･Press and hold P for over a second and then tap / / in the pop-up screen to switch Mute (Ringtone 0)/Vibrate/Off (disabling Silent mode).･From the Home screen etc., press and hold lower part of m to set vibrator. While vibration is on, press m to set to Mute (Ringtone 0). On the unlock screen, during a call, or while the camera, WALKMAN, Media Player, etc. is activated, pressing and holding lower part of m does not set silent mode.･Setting the phone to Silent mode does not mute sounds for shutter, playback of video or music, alarm, dialpad operation sound during a call or when [End call] is tapped, etc. Note that adjusting volume for "RINGTONE & NOTIFICATIONS" in Volumes (P.140) or turning the volume up by pressing upper part of m cancels Silent mode.You can save the current displayed screen as an image (screen shot).1On the screen you want to capture, press and hold P and lower part of m for over a second at the same time.･Screenshot is captured and appears in the status bar.❖Information･You can also capture a screenshot by pressing and holding P for over a second and then tapping [Take screenshot].･Drag the status bar downwards and tap [Screenshot captured.] on the Notification panel to check captured images in the "Album" app. Tap [Share] to attach captured images to an application to send or to share them. "Share" may not appear depending on notification status on the Notification panel.Setting Silent mode Capturing screenshot](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-51.png)
![50Before Using the TerminalWhen a checkbox/radio button is displayed besides a setting item, mark or unmark a checkbox/radio button to switch on/off for the setting.Enter a word in the search box to browse the information in the terminal or on the Internet.1From the Home screen, tap , then tap [Google].･The software keyboard appears.2Enter a search word.･Search suggestions appear as you enter a character. For character entry, see "Character entry" (P.51).･To enter a new search word, tap .3Tap a search item or .･When you select an application from the search result, the application is activated.❖Information･If a Google account is set, the Google Now screen appears in Step 1. Follow the onscreen instructions.･Tap on the software keyboard to input a search word by voice typing with "docomo voice input" or "Google voice typing".Using Google voice typingEnter a search word by voice.1From the Home screen, tap on the Google search widget.2Speak a search word to the microphone.･Search results appear.Marking/Unmarking to switch setting / Switch on/off the setting for a checkbox. / Switch on/off the setting for a radio button. / Tap or drag left or right to switch on/off the setting.Searching information in the terminal and web pages](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-52.png)
![51Before Using the TerminalSearch settingsYou can set to use for search box or set search objectives in the terminal.1From the Home screen, tap , then tap [Google].･The software keyboard appears. Tap .2Tap and [Settings].･Google search setting screen appears. You can set the following items.* Appears when a Google account is set.To enter characters, use the software keyboard which appears when you tap the character input box in a mail, phonebook, etc.❖Information･When the software keyboard is displayed, appears on the status bar.･To return to the previous screen from the character entry screen, tap or x.･Touch and hold a text in the character entry screen to display the enlarged text to check with dragging on the text.In the terminal, you can select Input method (keyboard type) from "Google voice typing", "Moji-Henshu", "Xperia™ Chinese keyboard", "Xperia™ Japanese keyboard" or "Xperia™ keyboard".Google Now*Set location information service to on to check weather information for the current location, traffic information, directions.VoiceYou can change language and settings for voice search.Phone searchChange the search range by marking/unmarking data categories (Apps, Browser, Chrome, Contacts, docomo phonebook, Email, File Commander, Messaging, OfficeSuite, Play Books, Play Movies & TV, WALKMAN) in the terminal.Privacy and accountsSet whether to display search options from Web history when a search word is entered, or delete a search history for contents or applications in the terminal.･You need to create your Google account.Character entrySelecting entry methodGoogle voice typingSelect to enter characters by voice input with Google voice typing.Moji-HenshuSelect to enter characters by voice input with docomo voice input.Xperia™ Chinese keyboardSelect to enter Chinese.Xperia™ Japanese keyboardSelect to enter Japanese.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-53.png)
![52Before Using the Terminal1From the Home screen, tap , then tap [Settings].2Tap [Language & input]u[Default].3Tap [Xperia™ Japanese keyboard]/[International keyboard].❖Information･When the language is set to English, the default input method is set to "International keyboard". To use the Japanese keyboard, tap [Xperia™ Japanese keyboard] in Step 3. In this manual, explanations are given only for "Xperia™ Japanese keyboard".･While entering characters, drag the status bar downwards and tap [Choose input method] to select from "Google voice typing"/"Japanese Moji-Henshu"/"Xperia™ Japanese keyboard"/"International keyboard".･"Xperia™ Chinese keyboard" is not available by default. To use Chinese keyboard, from the Home screen, tap , then tap [Settings]u[Language & input] and mark "Xperia™ Chinese keyboard".For Japanese keyboard, there are 4 types of software keyboards: phonepad, QWERTY, Japanese syllabary and Kana handwriting input.■ Phonepad keyboard■ QWERTY keyboardXperia™ keyboardYou can select a language for text entry.Software keyboardPortraitLandscapeLandscapePortrait](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-54.png)
![54Before Using the Terminal･Tap in Step 2 to change size and location of software keyboard. Drag blue frame to change size. Drag the software keyboard to move to. To restore the software keyboard to the default, tap [Reset].Enter characters using a keyboard with characters allocated in the same arrangement as general cell phones. Flick input or toggle input is used for character entry.Entering characters on the phonepad keyboardIcon Function / Each time you tap, the character mode switches "Hiragana/Kanji" → "Alphanumeric" in order and status icons, → / / appear in the status bar. / Touch and holdDisplay a pop-up menu. / / / : Keyboard switch : Display the setting screen for Japanese keyboard : Display the extensions list (two-byte)/ (one-byte) : Switch character mode : Change size and location of software keyboard (only for vertical screen) : Hide the software keyboard / Each time you tap, the character mode switches "Hiragana/Kanji/alphabets" → "Number" in order and status icons, / , etc. → / appear in the status bar. / Touch and holdEnter one-byte/two-byte symbols from the displayed list. Switch the tab to enter facemarks from the displayed list (a pictogram tab and deco-mail tab are also displayed when entering in sp-mode mail).Appears before fixing character in Hiragana/Kanji input mode. It displays alphanumeric or katakana conversion candidates assigned to tapped key.Appears after conversion is fixed to return to text before conversion.Move the cursor*1 : To the left.Touch and hold to move continuously. Or change the range for conversion.Move the cursor*1 : To the right.Touch and hold to move continuously. Or change the range for conversion.When there is an unfixed character string with the cursor at the right end, tap to enter the same character as the one at the end.Before the conversion is fixed, "確定 (Fix)" is displayed*2, and fixes the entering characters or conversion characters. When characters are already fixed, enter a line feed at the cursor position.Icon Function](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-56.png)
![56Before Using the Terminal･Flick input is available by default. When not using it, you can cancel by the following operations.aOn a character entry screen, touch and hold .bTap .c[On-screen keyboard settings]uUnmark "Flick input" checkbox.･To change sensitivity of the flick input, on a character entry screen, touch and hold , tap and [On-screen keyboard settings]u[Sensitivity of flick input], then select "High"/"Medium (default)"/"Low".■ Toggle entryTap the same key continuously to enter the assigned character.To enter characters assigned to the same key continuously, operate the followings.･Ex: To enter "あお"aTap "あ" once.bTap , and tap "あ" 5 times.･Ex: To enter "ca"aTap "abc" 3 times.bTap *.cTap "abc" once.* In some applications, tap in Step b.･To switch upper/lower case or change to voiced/semi-voiced sound, tap .･Multitap text input is available by default. When not using it, you can cancel by the following operations.aOn a character entry screen, touch and hold .bTap .c[On-screen keyboard settings]uUnmark "Multitap text input" checkbox.❖Information･In case of Multitap text input, when the tapped key's highlighter goes off and you can enter a character assigned to the same key consecutively without tapping .](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-58.png)
![58Before Using the Terminal*1 When any characters are entered, just tap the desired position on the entered character string to move the cursor.*2 In some screens such as the mail account registration screen, "次へ (Next)", "完了 (Done)", "実行 (Go)", etc. appear.Selecting an assistant keyboardWhen you enter in Hiragana/Kanji input mode using the QWERTY keyboard, you can change the assistant keyboard to make the frequent using keys to be displayed widely for easy tapping.1On a character entry screen, touch and hold .2Tap .3Tap [On-screen keyboard settings]u[Choose key type].4Tap any of [Static key resizing]/[Key highlight while typing]/[Dynamic key resizing with highlight]/[Off].■ Static key resizingWiden frequent using key for easy tapping.Touch and holdDisplay the available extensions list.Appears before fixing character in Hiragana/Kanji input mode. It displays alphabet or katakana conversion candidates assigned to tapped key. / / In alphanumerics input mode, tap to switch capitalization/upper case/lower case.In Hiragana/Kanji input mode, highlight and select word in conversion candidates. Tap continuously to change a word highlighted in conversion candidates and select a word to enter.Touch and holdActivate online dictionary.You need to mark "Online dictionary" checkbox in the Japanese keyboard setting screen. / Appears in number input mode. Tap to switch numbers or symbols to one-byte/two-byte characters.Icon Function](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-60.png)
![59Before Using the Terminal■ Key highlight while typingWiden frequent using key and highlight the key that is predicted for the next entry.■ Dynamic key resizing with highlightWiden the key that is predicted for the next entry much further and highlight it.■ OffDisplay equally the width of each key.Changing display keysYou can set not to display less-frequent-used keys (Q, X, C, etc.) on the QWERTY keyboard.1On a character entry screen, touch and hold .2Tap .3Tap [On-screen keyboard settings]u[Hide keys].･When the Choose key type (P.58) is set to "Off", "Hide keys" cannot be selected.4Unmark the checkbox of the key you want to hide.5Tap [OK].](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-61.png)
![60Before Using the TerminalCustomizing keyboardYou can change symbols which are displayed in QWERTY keyboard when entering number to desired characters/symbols.1On a character entry screen, touch and hold .2Tap .3Tap [On-screen keyboard settings]u[Keyboard customization].4Tap a symbol you want to change and delete character previously set, then enter a character to display and tap [OK].･Only one character (two-byte or one-byte character) can be entered.5Tap [OK].❖Information･To return to the default status, on the keyboard customize screen, tap , then tap [Reset]u[OK].](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-62.png)
![64Before Using the Terminal*2 In some screens such as the mail account registration screen, "次へ (Next)", "完了 (Done)", "実行 (Go)", etc. appear.❖Information･When you enter character by Kana handwriting for the first time, read a guidance and tap [OK].･In Kana handwriting input, hiragana, alphabet, number, some symbols can be entered.･You can enter a character continuously without deleting entered character.･For voiced sound and semi voiced sound mark, enter in the right upper part of the Kana handwriting input screen.･For punctuation mark and lower case, enter in the lower part from the center of the Kana handwriting input.･For entering alphabet, enter it with reference to lower horizontal line of the Kana handwriting input screen.In the character entry screen such as mail, phonebook, etc., double-tap text you want to edit so that text edit menu appears at the top of the screen. Drag or to change the character string to select.❖Information･To paste a copied or cut character string, touch and hold a position where you want to insert, then tap [PASTE]. Alternatively, when texts are entered, tap a position where you want to insert, then tap and [PASTE].･Edit menu icons vary by applications.･In the vertical screen mode, editing menu may not be displayed.Editing text (Select all)Select all entered text. (Cut)Cut a selected character string. (Copy)Copy a selected character string. (Paste)Paste a copied/cut character string. (Complete)Close the edit menu.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-66.png)
![65Before Using the TerminalFor each input method, you can make settings related to character entry.1From the Home screen, tap , then tap [Settings]u[Language & input].2Tap on "Google voice typing"/"Moji-Henshu"/"Xperia™ Chinese keyboard"/"Xperia™ Japanese keyboard"/"Xperia™ keyboard".･Settings screen for respective input method appears. Tap an item displayed on the screen to set.❖Information･The items vary depending on the input method.･Alternatively, while entering characters, drag the status bar downwards and tap [Choose input method] u [Set up input methods], then tap for each input method to display.･ on the "Xperia™ Chinese keyboard" is not available by default. To set Chinese keyboard, mark "Xperia™ Chinese keyboard" in Step 2, then tap .1From the Home screen, tap , then tap [Settings]u[Language & input].2Tap on "Xperia™ Japanese keyboard".･The setting screen for Xperia™ Japanese keyboard appears.❖Information･Alternatively, on a character entry screen, touch and hold and tap to display the setting screen for Xperia™ Japanese keyboard. Alternatively, while entering characters, drag the status bar downwards and tap [Choose input method] u [Set up input methods], then tap for "Xperia™ Japanese keyboard" to display.Setting character entry Setting Xperia™ Japanese keyboardDisplaying the setting screen for Xperia™ Japanese keyboard](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-67.png)
![66Before Using the TerminalCommon settings of software keyboardMake keyboard settings such as Key sound, Vibrate, etc.1On the setting screen for Xperia™ Japanese keyboard, tap [On-screen keyboard settings].･Set items for "COMMON ON-SCREEN KEYBOARD SETTINGS".❖Information･"Sound on keypress" volume is related to "RINGTONE & NOTIFICATIONS" in Volumes (P.140).･By default, conversion candidates are displayed in 2 lines in portrait/landscape screen.Keeping keyboard typeSet to stabilize the last status of keyboard (phonepad/QWERTY/Japanese syllabary keyboard/Kana handwriting input) in the each portrait/landscape screen in kana/alphabet/number input mode.1On the setting screen for Xperia™ Japanese keyboard, tap [On-screen keyboard settings].2Mark [Keep keyboard type].❖Information･You can set to stabilize the last status of keyboard in the each portrait/landscape screen without marking "Keep keyboard type".Sound on keypressSet whether to sound at the time of key tapping.Vibration on keypressSet whether to vibrate at the time of key tapping.Pop-up on keypressSet whether to magnify tapped key or display flick guide.No. of lines (portrait)Set number of lines for conversion candidates displayed in portrait mode.No. of lines (landscape)Set number of lines for conversion candidates displayed in landscape mode.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-68.png)
![67Before Using the TerminalYou can set support functions for character input such as Word suggestion function, Setting voice input.Setting Word suggestionThe Word suggestion function shows predicted conversion candidates when you enter Japanese/English characters. Mark the checkbox of Word suggestion checkbox to set "Spell check" and "Auto space". That helps you entering characters with ease.1On the setting screen for Xperia™ Japanese keyboard, tap [Input support].2Mark "Word suggestions".❖Information･Flick or drag downwards in the word suggestion field to enlarge the word suggestion field and to hide the keyboard. Tap [前候補 (previous suggestion)]/[次候補 (next suggestion)]/[確定 (fix)] shown below the word suggestions to select/fix characters to be entered. To show the software keyboard, tap [戻る (Back)] or .･In Hiragana/Kanji input mode, tap [直変 (Direct conversion)]/[予測 (Prediction)] in the word suggestion field to display direct conversion candidates/predicted conversion candidates.Setting Spell checkSpell check corrects mistyped characters and shows conversion candidates before conversion in one-byte alphabet input mode when entering characters with QWERTY keyboard or Japanese syllabary keyboard.1On the setting screen for Xperia™ Japanese keyboard, tap [Input support].2Mark "Spell check".❖Information･If Word suggestion function (P.67) is not set, Spell check is not available.Setting Auto spaceWhen selecting English word suggestion, Auto space enters next to the entered character. However, space is not entered automatically in the mail address or URL input fields.1On the setting screen for Xperia™ Japanese keyboard, tap [Input support].2Mark "Auto space".❖Information･If Word suggestion function (P.67) is not set, Auto space is not available.Input support](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-69.png)
![68Before Using the TerminalSetting voice inputSet voice input to "docomo voice input" or "Google voice typing".1On the setting screen for Xperia™ Japanese keyboard, tap [Input support]u[Voice typing].2Tap [docomo voice input]/[Google voice typing].❖Information･"docomo voice input" is set by default.･When you tap on the software keyboard for the first time, you can select whether to activate docomo voice input or change to Google voice typing.Auto capitalizationSet to capitalize automatically the top letter you enter in one-byte alphabet entry mode.1On the setting screen for Xperia™ Japanese keyboard, tap [Input support].2Mark "Auto capitalization".❖Information･The top letter may not always be capitalized automatically in one-byte alphabet entry mode when "Auto capitalization" is marked.You can change software keyboard skin.1On the setting screen for Xperia™ Japanese keyboard, tap [Keyboard skin].2Select from displayed keyboards and tap [Set skin].❖Information･To download and add keyboard skins from a website, tap [Search for skin] in Step 2. Some keyboard skins downloaded from website may not support the terminal.･To delete the downloaded keyboard skin, from the Home screen, tap , and tap [Settings]u[Apps]u"Downloaded" tab, and tap the keyboard skin you want to delete, and then tap [Uninstall]u[OK]u[OK]. Also, tap [Uninstall] in Step 2 so that you can delete the keyboard skin that is not compatible with the terminal.Setting keyboard skin](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-70.png)
![69Before Using the TerminalYou can use or add extensions when entering characters.Using Contact Picker 2.3If contacts are registered to the Contacts, you can use "Contact Picker 2.3" to enter contact information when entering characters.1On a character entry screen, touch and hold .2Tap .3Tap [Contact Picker 2.3]u"Contacts" tab.4Tap the contact to pick up.･When you enter a name or reading in the search box at the top of the screen, a list of contacts appears accordingly.5Mark items you want to enter and tap [OK].･If you want to select/deselect all items, tap [Mark all]/[Unmark all].❖Information･"History" tab displays contacts that are picked up when entering characters.Adding an extensionYou can install extensions to use when entering characters.1On the setting screen for Xperia™ Japanese keyboard, tap [Manage extensions].2On the how to start extensions screen, tap [OK].･Extensions settings screen appears.3Tap [Download new extensions].･Extensions list screen appears.4Select an application you want to add.･After this step, follow the onscreen instructions.❖Information･Marked extensions in the extensions settings screen can be activated in the character entry screen. The preinstalled extension "Contact Picker 2.3" is marked by default.Using extensions](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-71.png)
![70Before Using the TerminalTo display the word as the preferred candidate when entering characters, set the user dictionary beforehand.Registering words in user dictionariesThere are 2 types of user dictionaries: "My words Japanese" and "My words English".1On the setting screen for Xperia™ Japanese keyboard, tap [Dictionaries].2Tap [My words Japanese]/[My words English].3Tap and [Add].4Tap the character input box for "Reading" and fill it out.5Enter a word in the input box for "Word" and tap [完了 (Done)] on the software keyboard.6Tap [Save].❖Information･Up to 50 characters (regardless of one-byte or two-byte characters) can be stored for a "Reading" and "Word", and up to 500 items can be stored in the user dictionary.･When entering characters, tapping [直変 (Direct conversion)] in the word suggestion field may give priority to some registered words.･Added user dictionary can be edited or deleted. To edit, select an added user dictionary and tap , then tap [Edit] for editing and tap [Save]. To delete, select an added user dictionary and tap , then tap [Delete]u[Delete]. To delete all user dictionary, tap , then tap [Delete all]u[Delete].Setting Words by learning1On the setting screen for Xperia™ Japanese keyboard, tap [Dictionaries] then [Learn words].2Mark "Save words while typing".･To reset already learned words, tap [Delete saved words]u[Delete].❖Information･To delete history for learned words individually, touch and hold a word you want to delete and tap [Delete].User dictionary settings](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-72.png)
![71Before Using the TerminalSetting online dictionaryIn Hiragana/Kanji input mode, touch and hold to activate online dictionary.1On the setting screen for Xperia™ Japanese keyboard, tap [Dictionaries] then [Online dictionary].2Tap [Online dictionary], then read the note and tap [Agree].･"Online dictionary" is marked.Backing up and restoring dictionaryUser dictionary and Words by learning can be backed up onto an internal storage and restored when needed.1On the setting screen for Xperia™ Japanese keyboard, tap [Dictionaries] then [Backup & restore].2Tap [Backup]/[Restore].3Mark a dictionary to back up/restore.･Select "My words Japanese"/"My words English"/"Learn words".4Tap [Go].･When backing up, a screen asking whether to overwrite the user dictionary on the internal storage appears. When restoring, a screen asking whether to overwrite the user dictionary in the terminal appears.5Tap [OK]u[OK].･The data is backed up or restored.❖Information･If restoring data is failed, user dictionary in the terminal restores to the default. Restore by operating again.･User dictionary and Words by learning are not backed up onto microSD card.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-73.png)
![72Before Using the TerminalYou can view the detailed explanations on the high performance Xperia™ Japanese keyboard from the basic to application. The latest information can be obtained from the websites for extensions or keyboard skins.1On the setting screen for Xperia™ Japanese keyboard, tap [POBox Touch User Guide].･POBox Touch User Guide appears.❖Information･Alternatively, touch and hold in the Kana handwriting input screen to activate the Kana handwriting input guide in the POBox Touch User Guide (Japanese), with which you can view the detailed explanations for the handwriting input.Connect USB keyboard or Bluetooth keyboard that supports HID (Human Interface Device) profile with the terminal to enter characters.■ Using JIS keyboard1Connect a USB keyboard or Bluetooth keyboard and drag the status bar downwards, then tap [Select keyboard layout].･If a notification does not appear on the status bar, from the Home screen, tap and [Settings]u[Language & input].2Tap a name of USB keyboard or Bluetooth keyboard connected to the terminal.3Tap [Set up keyboard layouts]u[Japanese].･JIS keyboard is set. Tap y etc. to end setting.POBox Touch User GuideUSB keyboard/Bluetooth keyboard](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-74.png)
![74docomo Palette UIdocomo Palette UIHome screen is a start screen for using applications. You can personalize the Home screen by adding or moving, for example, application shortcuts and widgets, or changing the wallpaper.Tapping y displays Home screen which consists of up to 12 screens you can use flicking left and right.aCurrent home screen positionbWidget : Google SearchcWidget : i-channeldWidget : Machi-charaeShortcuts (applications)fApplications buttongWallpaper❖Information･You can switch the home application between "docomo" and "Xperia™" in the terminal."docomo" is set to the home application by default. To change the home application, from the Home screen, tap , then tap [Settings]u[Setup guide], and on the Preferred applications screen, tap [Change now]u[Home screen]. Alternatively, from the Home screen, tap , then [Settings]u[Xperia™]u[Preferred apps settings]u[Home screen] (P.148).･When the home application is switched, widgets or shortcuts on the screen may not be displayed correctly depending on home screen layout etc.･When the instruction guide for the Home screen appears, tap [OK]/[Do not show this again] to display the Home screen.Switching the Home screen1Flick the Home screen to left or right.･The Home screen switches.❖Information･You can check the current position of the Home screen with at the top of the screen.･Alternatively, display a list of home screens and then tap a home screen to switch. For details on the home screen list, see "Displaying a list of home screens" (P.75).Home screenLearning Home screenabcefegd"ひつじのしつじくん®(Butler Sheep)"©NTT DOCOMO](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-76.png)
![75docomo Palette UIDisplaying a list of home screens1From the Home screen, pinch-in.･A home screen list appears.❖Information･Touch an hold an area of the Home screen where no icons are displayed and tap [Home screens] to display list of home screens.･When the instruction guide for the home screen list appears, tap [OK]/[Do not show this again].･To return to the home screen, pinch-out, or tap y or x.1Touch and hold an area of the Home screen where no icons are displayed.･"Select an action" menu appears to change the Home screen.■ Select an actionAdding a shortcut to the Home screen1On "Select an action" menu screen (P.75), tap [Shortcut].2Select a shortcut you want to add.･The shortcut appears on the Home screen.❖Information･Alternatively, you can add a shortcut from the Home screen, tap and touch and hold an application icon you want to add, tap [Add].Adding to the Home screenShortcutAdd shortcuts of applications or setting screens (P.75).WidgetAdd widgets (P.76).FolderCreate a new folder (P.77).KisekaeChange the background of the Home screen or Application screen, or download from website to add (P.77).WallpaperChange the wallpaper, or install from Google Play and add wallpapers (P.78).GroupAdd group shortcut of Application screen (P.78).Home screensShow home screens (P.75).Wallpaper loop settingsSet whether to loop wallpaper on the Home screen.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-77.png)
![76docomo Palette UIAdding a widget to the Home screen1On "Select an action" menu screen (P.75), tap [Widget].･A list of widgets appears.BookmarksDisplay bookmarks of Browser.BookmarksDisplay bookmarks of Chrome.CalendarDisplay the calendar.ContactDisplay contacts using Contacts application of Xperia™.Contents HeadlineDisplay recommended music, videos, e-books and applications information at the dmarket.docomo location informationActivate docomo location information application.docomo Wi-Fi Easy ConnectionYou can connect/disconnect to Wi-Fi with a one-touch operation in a Wi-Fi area.EmailSelect Email account or folder to display.FacebookPost your comments or select and upload images to Facebook.FacebookShow or post Facebook comments.GmailSelect Gmail account or folder to display.Google SearchDisplay the Google search box.Google+ postsDisplay posted contents in Google+.IC Tag/Barcode ReaderEnable or disable IC Tag read mode.InfraredSend your profile or receive a file via infrared.iチャネルウィジェット (i-channel widget)Display latest information such as news or weather.Music UnlimitedDisplay Music Unlimited.NFC Quick LaunchEnable/disable NFC Reader/Writer, P2P function.OfficeSuite Recent HistoryDisplay OfficeSuite recent history.Personal areaDisplay personal area.PhonebookDisplay phonebook using phonebook application provided by DOCOMO.Phonebook Select membersDisplay history of calls or message (SMS) of 3 contacts selected from the Phonebook fixed/at random.Play - My LibraryDisplay videos or books managed in Google Play by selecting from "My Library", "My Book" or "My Movie".Play RecommendationsDisplay applications recommended by Google Play by selecting from "All", "Apps", "Books" or "Movies".Play StoreDisplay applications recommended by Google Play.Schedule & MemoDisplay memos or photo memos on the calendar.Screen mirroringEnable/disable Screen mirroring.TrackID™Display TrackID.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-78.png)
![77docomo Palette UI2Select an item.❖Information･If you install an application with widget from Google Play, the installed widget is added to the widget list.Adding a folder to the Home screen1On "Select an action" menu screen (P.75), tap [Folder].･A folder is added on the Home screen.❖Information･To rename a folder, tap a folder you want to rename and tap the name entry field to enter a folder name, then [完了 (Done)] on the software keyboard and then tap on the screen. Alternatively, touch and hold a folder you want to rename and tap [Edit name], then enter a folder name and then tap [OK].･To move a shortcut into a folder, touch and hold a shortcut you want to move, then drag it onto any folder.Changing Kisekae1On "Select an action" menu screen (P.75), tap [Kisekae].2Flick left or right and select a Kisekae you want to change to.❖Information･Alternatively, in Step 2, select Kisekae you want to change to and tap [Set] to change Kisekae.･Alternatively, from the Home screen, tap and then tap [Kisekae] to change.･You can add Kisekae contents by tapping [Search] to download from website. To delete added Kisekae contents, select the image and tap [Delete]u[Delete].TrafficEnter a widget name and destination to activate the widget showing travel time to the destination. Tap to check supplied traffic information.YouTubeDisplay the list of frequently played videos and recommended.カテゴリナビ (Category navigation)Display topics or search information by selecting category such as foodie and transfer information.マチキャラ (Machi-chara)Display missed calls etc. or use しゃべってコンシェル (Shabette concier).診断ツール (Diagnosis tool)Activate diagnosis tool.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-79.png)
![78docomo Palette UIChanging wallpaper1On "Select an action" menu screen (P.75), tap [Wallpaper].2Tap any of [Album]/[Live Wallpapers]/[Xperia™ wallpapers].･When you tap [Album], select an image to set to the wallpaper, drag to set trimming frame for range in the image you want to use as wallpaper, and then tap [Crop] to set wallpaper.･When you tap [Live Wallpapers], select a content, tap [Set wallpaper]. You can also install and add Live wallpaper content from Google Play. For some contents, you can change type or contents displayed on the wallpaper by tapping [Settings].･When you tap [Xperia™ wallpapers], select an image to set to the wallpaper, tap [Set wallpaper].❖Information･Alternatively, you can change from the Home screen, tap and tap [Settings]u[Display]u[Wallpaper].Adding a group to the Home screen1On "Select an action" menu screen (P.75), tap [Group].2Select a group of applications you want to add.❖Information･Alternatively, on the Application screen (P.80), touch and hold a group name and then tap [Add].You can add, delete, sort home screens while the home screen list is displayed.･For details on the home screen list, see "Displaying a list of home screens" (P.75).Adding a home screen1From the Home screen, pinch-in.･A home screen list appears.2Tap .❖Information･There are 5 home screens by default. You can add 7 home screens moreover.Deleting a home screen1From the Home screen, pinch-in.･A home screen list appears.2Tap of thumbnail you want to delete on the Home screen.Changing the Home screen](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-80.png)
![79docomo Palette UI❖Information･Alternatively, on the home screen list, touch and hold a thumbnail of home screen you want to delete and tap [Delete].Sorting home screens1From the Home screen, pinch-in.･A home screen list appears.2Touch and hold a home screen you want to sort.3Drag it anywhere.Moving an icon on the Home screen1From the Home screen, touch an icon you want to move.2Drag it anywhere.･To move to another Home screen, keep touching the icon and drag it to left or right.Deleting an icon from the Home screen1From the Home screen, touch and hold an icon you want to delete.2Tap [Delete].❖Information･Alternatively, touch and hold an icon you want to delete from the Home screen and drag it to displayed at the bottom of the screen.Uninstalling a shortcut or widget on the Home screen･Before uninstalling shortcut or widget on the Home screen, back up contents related to the application or widget that you want to save including data saved in the application or widget.･Some applications or widgets may not be uninstalled.1From the Home screen, touch and hold a shortcut or widget you want to uninstall.2Tap [Uninstall].･A confirmation screen appears for uninstall.3Tap [OK]u[OK].❖Information･You can also uninstall them from the Settings menu (P.128). For details, see "Deleting installed application" (P.146).](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-81.png)
![80docomo Palette UIYou can access the applications installed in the terminal from the Application screen and use each function.1From the Home screen, tap (Applications button).･The Application screen appears.aApplication tab･View Application screen.bRecommends tab･Install applications recommended by DOCOMO.cOptional menu icon･View optional menu such as Settings.dGroup name･You can manage applications by groups.･Tap a group name to show/hide applications in the group.eApplication icon･When you download an application from website or a downloaded application is updated, appears on the upper left of the application icon.･Some application icons are displayed with a number of missed calls, unread mails, etc.fNumber of applications in the groupgApplications in the group･To display/hide applications in all groups, pinch-out/in the Application screen.❖Information･When the instruction guide for the Application screen appears, tap [OK]/[Do not show this again].･To close the Application screen, tap x or y.･Touch and hold an application icon, then tap [About] to check the application information.･If you selected Japanese as a language in Initial settings (P.42), some group names are displayed in Japanese even after the language setting is changed. These group names can be changed to English (P.87).Application screenLearning Application screendfgeabc](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-82.png)
![85docomo Palette UI GoogleSearch information in the terminal and web pages by keywords.→P.50 Voice SearchUse Google Voice Search. Play StoreAccess to the Google Play, download and buy new applications.→P.179 YouTubePlayback videos around the world or upload recorded videos.→P.222 Play Movies & TVAn application for accessing movie rental service of Google Play. Select a movie you want to watch and rent it. Play BooksDownload new books, bestsellers, etc. from Google Play Books to read. CalendarDisplay a calendar and manage schedule.→P.232 MapsUse Google map services, such as viewing current location, finding another location and calculating routes.→P.229 NavigationDisplay Google Maps Navigation to receive detailed guides for your destination.→P.231 LocalUse various information registered on Google Maps, such as shops around the current location.→P.230 Google+Activate Social Network Service (SNS) client application Google+ provided by Google. MessengerChat with friends using Google+ instant messaging.❖Information･The applications displayed on this application screen are pre-installed by default. Some pre-installed applications can be uninstalled. Even if you uninstall, you can download from "Play Store" (P.179) again.･From the Home screen, tap and tap "Recommends" tab u[おすすめアプリを見る (See recommended applications)] to display applications recommended by DOCOMO. For details, see "Installing "Recommends" applications" (P.89).･Some application names may not be displayed fully.･Some applications require downloading and installation. If you cannot download application by tapping, from the Home screen, tap and tap [Settings]u[Security]u[Unknown sources]u[OK], mark the checkbox and then tap the application.･Activating two or more applications may increase battery consumption and the operation time may become short. For this reason, it is recommended to end applications when not used. To end an application, on the application screen you are using, tap x to display the Home screen (P.74), or tap r and then [Close all].](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-87.png)
![86docomo Palette UI･If you selected Japanese as a language in Initial settings (P.42), some group names are displayed in Japanese even after the language setting is changed. These group names can be changed to English (P.87).From the Application screen, you can add icons, sort icons, uninstall applications. Also you can change group setting.Adding an application icon to the Home screen1From the Application screen, touch and hold an icon you want to add to the Home screen.2Tap [Add].･The application icon is added onto the Home screen.❖Information･Touch and hold an area of the Home screen where no icons are displayed and tap [Shortcut] u[Application] and select an application to add an icon.Sorting application icons1From the Application screen, touch and hold an application icon you want to sort.2Drag it anywhere.･The application icon moves.❖Information･To move an application icon to another application group, touch and hold the icon on the Application screen, tap [Move], then select a desired group, or touch and hold the icon on the Application screen, then drag it to a group to move to.Uninstalling an applicationSome application icons can be deleted from the Application screen.･Before uninstalling application, back up contents related to the application that you want to save including data saved in the application.･Some applications or widgets may not be uninstalled.1From the Application screen, touch and hold an icon of application you want to uninstall.2Tap [Uninstall].･A confirmation screen appears for uninstall.3Tap [OK]u[OK].❖Information･You can also uninstall them from the Settings menu (P.128). For details, see "Deleting installed application" (P.146).Changing the Application screen](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-88.png)
![87docomo Palette UIAdding a shortcut of group to the Home screen1From the Application screen, touch and hold an icon you want to add to the Home screen.2Tap [Add].･Shortcuts to the group is added to the Home screen.❖Information･Touch and hold an area of the Home screen where no icons are displayed and tap [Group] and select a group to add a shortcut.Changing the color of group name1From the Application screen, touch and hold a group you want to change the color.2Tap [Edit label] and select label color to change.･The color for group name is changed.Deleting group1From the Application screen, touch and hold a group you want to delete.2Tap [Delete]u[OK].･Application icons belonged to the deleted group move to the "Download Application" group.❖Information･"Recently", "DOCOMO Services", and "Download Application" groups cannot be deleted.Changing group name1From the Application screen, touch and hold a group you want to rename.2Tap [Edit name].3Enter a group name and tap [OK].･The group is renamed.❖Information･"Recently", "DOCOMO Services", and "Download Application" groups cannot be renamed.Adding group1From the Application screen, tap and tap [Add group].2Enter a group name and tap [OK].･A new group is added.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-89.png)
![88docomo Palette UISorting groups1From the Application screen, touch and hold a group name you want to sort.2Drag it anywhere.･The group is moved.Display recently used applications in thumbnail list and activate.1Tap r.･Thumbnails of recently used applications are listed.❖Information･Flick left or right a thumbnail of application displayed to delete from the list.･Tap a thumbnail of application displayed to activate. To delete a thumbnail, touch and hold it and then tap [Delete from list]. Or to check an application information, touch and hold it and tap [App info]. To end all thumbnails of applications displayed and delete the all logs, tap [Close all].You can use a small app while using another application.1Tap r.･The set small apps appear.2Select a small app to use.･The small app activates.❖Information･By default, (Calculator), (Timer), (Note), (Recorder) are set. Tap to install a small app from Play Store and set it. To delete a set small app, touch and hold a small app you want to delete and then drag it out of the small app display area, then tap [Delete] when a deletion confirmation screen appears.･To close a running small app, tap .Opening windows of recently used applicationSmall apps](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-90.png)
![89docomo Palette UISearch application installed into the terminal to activate.1From the Application screen, tap and then tap [Search].･The software keyboard appears.2Enter application name to search.･Search suggestions appear as you enter a character.3Tap an application name.･The application activates.❖Information･If a Google account is set, the Google Now screen appears in Step 1. Follow the onscreen instructions.･Alternatively, from the Home screen, tap , then tap [Google] to search application. For details, see "Searching information in the terminal and web pages" (P.50).Icons on the Application screen can be displayed in a list or tiles.1From the Application screen, tap and then tap [List format]/[Tile format].The "Recommends" tab (P.80) in the Application screen shows applications recommended by DOCOMO.1From the Application screen, tap "Recommends" tab.2Tap [おすすめアプリを見る (See recommended applications)].3Select an application to use.･Download screen appears. Follow the onscreen instructions.❖Information･If you tap [おすすめアプリをすべて見る (See all recommended apps)] in Step 3, Browser activates and applications recommended by DOCOMO are displayed in a list.･Downloaded applications are displayed in "Download Application" group in the Application screen.1From the Application screen, tap and then tap [Application info].･The home application information appears.Searching applicationsSwitching application screensInstalling "Recommends" applicationsChecking Home application information](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-91.png)
![90PhonePhone1From the Home screen, tap , then tap "Dial" tab.2Enter the number of the recipient and tap .･If a wrong number is entered, tap to delete the number.3When the call is finished, tap [End call].❖Information･In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in Recent calls.･To activate Xperia™ phone application, from the Home screen, tap , then tap [Dial].Entering pause (,), (;) to sendFor using services requiring entry of number during a call such as check of the balance of a bank account, reservation of tickets, etc., enter an additional number to a phone number beforehand and make a call.■ Using 2-second pause (,)1From the Home screen, tap , then tap "Dial" tab.2Enter the phone number, then tap and tap [Add 2–sec pause].･Pause (,) is entered.3Enter an additional number, then tap .･Added number will automatically be sent approximately 2 seconds after the call is made.4When the call is finished, tap [End call].■ Using a wait (;)1From the Home screen, tap , then tap "Dial" tab.2Enter a phone number, tap and tap [Add wait].･Pause (;) is entered.3Enter an additional number, then tap .･When a call is received, a confirmation screen asking if you send the added number appears. Select "Yes" or "No".4When the call is finished, tap [End call].Making/Receiving a callMaking a call](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-92.png)
![91PhoneEmergency callWhen the terminal is within range of the service area, you can make an emergency call of 110 (Police), 119 (Fire and ambulance), or 118 (Japan Coast Guard).1From the Home screen, tap , then tap "Dial" tab.2Enter the number of the emergency call and tap .･If a wrong number is entered, tap to delete the number.3When the call is finished, tap [End call].❖Note･If docomo mini UIM card is not inserted to the terminal, emergency calls (110, 119, 118) cannot be made in Japan.･You can make an emergency call by tapping [Emergency call] on the unlock screen. In Japan, however, on the PIN code entry screen, while PIN code locked or while PUK locked, emergency calls (110, 119, 118) cannot be made.･This terminal supports "Emergency call location information". If you use the terminal to place a call to emergency numbers such as 110, 119, or 118, the information of a location where you are calling from (location information) is automatically notified to the Emergency call acceptance organization such as the Police Station.The Emergency call acceptance organization may not be able to figure out your exact location depending on the location where you place a call or radio wave condition.If you make a call hiding your caller ID, such as by entering a phone number with "184" for each call, the location information and phone number are not notified. However, the Emergency call acceptance organization may decide to obtain the location information and phone number regardless of your settings when they consider it is necessary for lifesaving, etc. Note that the areas/time for which the "Emergency call location information" is ready to be used vary depending on the preparatory state of each Emergency call acceptance organization.･When calling 110, 119 or 118 for emergency from the terminal, tell that you are calling from a mobile phone, and give your phone number and your current location precisely for checking callback from the police/fire department. Also, make a point to call in a stationary position to prevent the call from being dropped. Do not power off the terminal for at least 10 minutes after the emergency call just in case the Police or Fire/Ambulance may have to get in contact with you.･Note that you may not connect to the local Fire Department or Police Station depending on where you are calling from. In this case, try to call from a public phone or an ordinary phone in the neighborhood.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-93.png)
![92PhoneMaking an international call (WORLD CALL)For details on WORLD CALL, refer to DOCOMO International Services website.1From the Home screen, tap , then tap "Dial" tab.2Touch and hold [0] key until "+" sign appears.･When making an international call, "+" is replaced by an international access code.3Enter Country codeuArea code (City code)uThe number of the recipient and tap .･If the area code begins with "0", omit "0". However, "0" may be required to dial to some countries or areas such as Italy.4When the call is finished, tap [End call].1While receiving a call, touch and hold (left) and drag it to (right).2When the call is finished, tap [End call].❖Information･Even if the screen lock is set, you can answer a call by the same operation.Muting the ringtone for an incoming call1When receiving a call, press m / P.❖Information･You can stop vibration by pressing m / P when silent mode (vibration) is set.･On the Home screen etc., press upper or lower of m to adjust the ringtone volume. For Silent mode setting, see "Setting Silent mode" (P.49).Receiving a call](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-94.png)
![93PhoneDeclining a call1While receiving a call, touch and hold (right) and drag it to (left).❖Information･Even if the screen lock is set you can reject a call by the same operation.･If you reject an incoming call during use of Voice Mail Service, the call is connected to the Voice Mail service center.Declining an incoming call and sending a message (SMS)When you cannot answer a call, you can reject the call and send a message (SMS). Message to send is registered in advance, and you can edit it if necessary.1Drag upwards when receiving a call.2Tap a message to send.･The message (SMS) is sent to the caller.❖Information･While Voice Mail service is in use, a call is rejected and a message (SMS) is sent then the caller is connected to the Voice Mail service center.･To create a new message to send, when receiving a call, drag up and tap [Write new message] to create a message and send. To edit a message, from the Home screen, tap and , then tap [Call settings]u[Reject call with message] to select and edit an existing message, then tap [OK].You can make or answer a call with Stereo Headset with Microphone (Sample) connecting to the terminal.Using Stereo Headset with Microphone](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-95.png)
![94Phone■ Making a call1Make a call with Stereo Headset with Microphone connected.･An operation of making a call is the same as usual operation (P.90).2Press the switch when the call is finished.■ Receiving a call1While receiving a call, press the switch of Stereo Headset with Microphone.･The call is connected.･When receiving a call, you can decline the call by pressing the switch for over a second.2After the call is finished, press the switch again.❖Information･If you are using regular headphones without a microphone, you need to speak to the microphone of the terminal.･While listening to music with Stereo Headset with Microphone connecting to the terminal, you can pause music and answer a call by pressing the switch. Music restarts automatically when ending the call depending on the player application.･Connecting and removing Stereo Headset with Microphone repeatedly during a call may disconnect a call.Calling screenOn the Calling screen, you can set speakerphone or mute, or enter a phone number to make a call to another party.aName of the other partybNumber of the other partycA photo saved in PhonebookdCall duration timeeSpeaker : Set speakerphone on/off.･Other party's voice can be heard from the speaker and handsfree call can be made.･When you switch to the other screen such as the Home screen with the speakerphone on, appears in the status bar.fPhonebook : View phonebook entry list screen (P.100).gOption menu : Set Hold during a call.･To cancel Hold, tap [Retrieve call] during Hold.･To set a call on hold, "Call waiting" subscription is required (P.98).Operations during a callajicdhbgef](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-96.png)
![95PhonehMute : Turn the microphone on/off during a call.･When you switch to the other screen such as the Home screen with Mute on, appears in the status bar.iDial key : Enter the phone number you want to add to make a call.･The ongoing call is automatically on hold.･To add a call, "Call waiting" subscription is required (P.98).jEnding a call❖Note･Do not bring the terminal close to your ear with the speakerphone on to avoid from hearing damage.❖Information･When you switch to the other screen such as the Home screen during a call, appears in the status bar. Drag the status bar and tap [Ongoing call] to display the calling screen. Tap [Mute] to set Mute to on/off for the microphone, or tap [Hang up] to end the call.Adjusting the earpiece volume1During a call, press m to adjust.❖Information･You can adjust the earpiece volume only during a call.1From the Home screen, tap , then tap "Recent calls" tab.･Recent calls screen appears.Recent calls screenIncoming call and outgoing call are displayed by chronological order in the Recent calls screen.aAll tabbPhone number/namecHistory icons : Missed call : Incoming call : Outgoing calldIncoming tabeOutgoing tabfCall status iconsCall historyShowing call historyabcegidhf](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-97.png)
![96Phone : Koe-no-Takuhaibin･For details on Koe-no-Takuhaibin, refer to "Koe-no-Takuhaibin" (P.98) or NTT DOCOMO website. : Caller ID notified : Caller ID hidden･It appears when prefix "186" (Notify)/"184" (Not notify) is entered to a phone number to make a call, or when you enter a phone number and tap , then tap [Caller ID notification]uTap [Notify]/[Not notify] to make a call. : Incoming/outgoing international callgDatehOutgoingiPhonebook❖Information･On the Recent calls screen, tap and tap [Call settings] to set/edit "Network service" or "Reject call with message" (P.97).Making a call from Recent calls1On the Recent calls screen (P.95), tap .Adding a number from the Recent calls to Phonebook1On the Recent calls screen (P.95), tap a phone number and tap [Add Phonebook].･Alternatively, touch and hold a phone number, tap [Edit number before call]u[Add Phonebook].2Tap [Register new] or a phonebook to add.･When you set a Google account etc., tap [Register new] so that you can select that account as a registration account.3On the Edit profile screen, enter required items.･You can set a name, mail address, group, etc. Tap in "Others", tap [Add] of an item you want to register, and then enter.4Tap [Save].](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-98.png)
![97PhoneDeleting a call history1On the Recent calls screen (P.95), touch and hold an item you want to delete in outgoing call log/incoming call log.2Tap [Delete from call log]u[OK].❖Information･To delete all items from Incoming log or Outgoing log, on the Recent calls screen, tap "Incoming" tab/"Outgoing" tab and tap , then [Delete all]u[OK].･To delete all items from Incoming log and Outgoing log, on the Recent calls screen, tap "All" tab and tap , then [Delete all]u[OK].When you have missed calls, appears in the status bar.1Drag the status bar downwards.2Tap [Missed call].･Recent calls screen appears.❖Information･For 1 missed call, drag the status bar, "Call back" and "Message" are displayed below "Missed call". Tap [Call back] to make a call to the party of the missed call, or tap [Message] to compose message (SMS) to send to the party. "Call back" and "Message" may not appear depending on notifications in the Notification panel.For multiple missed calls, number of calls appears below "Missed call".･When you have missed calls, an icon appears on the unlock screen to show that you have missed calls and a number of those.You can set the network services or edit Reject call with message.1From the Home screen, tap , then tap .2Tap [Call settings].Displaying missed callsCall settings](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-99.png)
![99PhoneOn the Phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and various service accounts.1From the Home screen, tap , then tap [docomo phonebook]u"Contacts" tab.･The phonebook list screen appears.❖Information･When you use for the first time, "Use of Cloud" screen appears. Tap [Start] to start using Cloud. Cloud service in phonebook require DOCOMO's phonebook application.･Alternatively, from the Home screen, tap and tap [Phonebook] to display phonebook list screen.･Phonebook data can be backed up in a microSD card using "ドコモバックアップ (docomo backup)" app. For information on backing up, see "ドコモバックアップ (docomo backup)" (P.238).･To activate Xperia™ phone application, from the Home screen, tap , then tap [Contacts].Sound & Vibration settingsPhone ringtoneSet ringtone (P.141).Vibrate when ringingSet whether to sound ringtone and vibrate the terminal when there is an incoming call (P.141).Dial pad touch tonesSet whether to emit dialpad operation sound (P.141).Reject call with messageEdit/Set a message (SMS) to be sent when rejecting an incoming call.Microphone noise suppressionMake the voice clear to understand for the other party during a call.AccountsSet Internet phone (SIP) account.Use Internet callingSet Internet phone (SIP) call method.PhonebookDisplaying phonebook](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-101.png)
![101PhoneAdding a new phonebook entry1On the phonebook list screen (P.100), tap [Register].･When you set a Google account etc., you can select that account as a registration account.2On the Edit profile screen, enter required items.･You can set a name, phone number, mail address, etc. Tap in "Others", tap [Add] of an item you want to register, and then enter.3Tap [Save].❖Information･To check the number of registered data in the Phonebook, from the phonebook list screen, tap , then tap [Others]u[About].･When you save "Phonetic name (first/last)", phonebook list is displayed according to Japanese syllabary order or alphabets order of "Phonetic name". If you enter "First name/Last name" in Kanji without entering "Phonetic name" to add phonebook entry, the name appear in "ABC" field on the phonebook list screen.･If "docomo" account is selected as saving location when registering phonebook entries, SNS/Blog accounts can be set.･To set default phone number or mail address from multiple phone numbers or mail addresses, on the Profile screen, touch and hold a phone number or mail address, then tap [Make default number]/[Make default address]. The phone number or mail address is marked on the right. To cancel the setting, on the Profile screen, touch and hold phone number or mail address, then tap [Clear default number]/[Clear default address].Using phonebook shortcutsWhen you tap the photo (image) part on the phonebook list screen (P.100), shortcuts for phone, mail, etc. appear. Tap the shortcut to make a call, or create and send a mail.Managing phonebookCall to registered phone number.Create and send message (SMS).Select Email application to create and send an email.･When you set an Email account, is displayed as .･On the application selection screen, select "Always" or "Just once" after selecting Email application.･If you do not set Gmail account, tap to display a setting wizard. After an account is set, you can create and send mails.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-103.png)
![102Phone❖Information･You can use other functions such as displaying a map from the registered addresses with shortcut.･When multiple phone numbers or mail addresses are saved, a selection screen appears by tapping a shortcut. If you mark "Save this selection" and then select a phone number, mail address, etc. the selection screen does not appear next time you use the shortcut.･When multiple phone numbers or mail addresses are saved, if default phone number or mail address is set, the selection screen does not appear by tapping a shortcut.･When you tap a part other than photo (image) on the phonebook list screen, profile screen of the phonebook appears instead of shortcuts.･For a phonebook entry with only name, tapping photo (image) does not display shortcuts.Making a call using the phonebook1On the phonebook list screen (P.100), tap a phonebook entry to call.2On the Profile screen, tap a phone number.3Tap [Call].Searching for a phonebook entry1On the phonebook list screen (P.100), tap [Search].2Enter name or reading to search.･All phonebook entries beginning with those letters (First name/Last name) appear.Changing contacts display order1On the phonebook list screen (P.100), tap , then tap [Others]u[Contacts display order].2Tap any of [Japanese order]/[Alphabetical order]/[Number order].Changing accounts to displayYou can set registered phonebook entries to be displayed in the phonebook list.1On the phonebook list screen (P.100), tap , then tap [Others]u[Accounts to display].2Tap [Display all accounts]/[Customize…].･When you set a Google account etc., you can select docomo account, Google account, etc. as an account to display.･Tap [Customize...], select a checkbox for each account, and then customize display of the phonebook list screen.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-104.png)
![103PhoneDisplaying phonebook entries by group1On the phonebook list screen (P.100), tap [Groups].2Select a group.･Phonebook entries are displayed by the group set when the entry is registered.･To hide the group, tap [Close].Setting group for phonebook entrySet a group from phonebook list screen.1On the phonebook list screen (P.100), tap [Groups].2Touch and hold a phonebook entry to set a group, and then drag it to any group.❖Information･To cancel group setting, touch and hold a phonebook entry you want to cancel, and then drag it to the set group.･When you set Google account etc., display groups by account. You can set/cancel group in the same account.Creating a new group in Phonebook1On the phonebook list screen (P.100), tap [Groups]u[Add].･When "Add" is not displayed, flick on groups to display.･When you set a Google account etc., you can select that account for adding.2On the group addition screen, enter color, icon, group name, and tap [OK].･The items vary depending on the account type.❖Information･You can edit/delete newly created groups and "Family"/"Friends"/"Company", which are saved by default. To edit a group, touch and hold a group and tap [Edit group], then enter editing content and tap [OK]. To delete a group, touch and hold a group and tap [Delete group]u[OK]. Phonebook entries belonged to the deleted group move to the "No group" tab.･For one account, you cannot add a group that has the same name as existing groups.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-105.png)
![104PhoneEditing a phonebook entry1On the phonebook list screen (P.100), tap a phonebook entry to edit.2On the profile screen, tap [Edit].3Select a required item and edit.･Tap [Add] to set phone number or mail address, or tap [Del] to delete the set information.4Tap [Save].Registering a phonebook entry to FavoritesYou can mark a phonebook entry as a favorite. The favorite list provides quick access to the phonebook entry you have marked.1On the phonebook list screen (P.100), tap a phonebook entry to combine.2On the profile screen, tap .･The icon turns to and the entry is registered to Favorites.❖Information･Phonebook entries saved to the docomo account/Google account can be added to Favorites.･To display phonebook entries added to Favorites, on the phonebook list screen, tap [Groups]u[Favorites], or from the Home screen, tap and then tap "Favorites" tab.Setting photo in a phonebook entry1On the phonebook list screen (P.100), tap a phonebook entry you want to add a picture.2On the profile screen, tap [Edit].3Tap [Setting] for image.4Tap [Take photo]/[Select picture].･When you tap [Take photo], select "Camera" or "Picture effect" and then select "Always" or "Just once" to take a photo. For information on how to shoot by "Picture effect", see "Picture effect" (P.215).･When you tap [Select picture], select "Album" or "File commander" and then to select "Always" or "Just once" to select a picture.5Set image range to be displayed, and then tap [Crop].･Drag or pinch to adjust cropping area to set image range.6Tap [Save].](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-106.png)
![105Phone❖Information･You can also set photo to a phonebook entry by the following operation.From the Home screen, tap , then tap [Album]. Select an image you want to set and tap the screen and , then tap [Use as]u[Photo of phonebook]. Select a phonebook entry you want to register, set image range to be displayed, and then tap [Crop].Setting ringtone1On the phonebook list screen (P.100), tap a phonebook entry to set ringtone.2On the profile screen, tap and [Set ringtone].3Select a ringtone and tap [Done].❖Information･For docomo account, you can set ringtone by tapping [Setting] for Ringtone on the Edit profile screen. For Google account, on Preferred apps settings (P.148), you can also set "Set all to" or "Contacts" to "Xperia™", then edit phonebook entry using "Contacts" app to set ring tone.･To set a ringtone other than the ones stored by default, tap .･Depending on the saving account, ringtone can be set when saving a phonebook entry.Combining phonebook entriesYou can bind multiple phonebook entries together into one.1On the phonebook list screen (P.100), tap a phonebook entry to combine.2On the profile screen, tap and [Join/Separate].･Phonebook entries to be combined are displayed.3Tap the phonebook entry to combine.❖Information･To cancel binding, on the profile screen of a phonebook entry you want to separate, tap , then tap [Join/Separate]u[Separate].Deleting a phonebook entry1On the phonebook list screen (P.100), tap , then tap [Delete].2Mark the phonebook entry you want to delete.･If you want to delete all phonebook entries, tap "Select all".･Tap [Index] to search phonebook to delete.3Tap [Delete]u[OK].](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-107.png)
![106Phone❖Information･To delete only a phonebook entry, in the phonebook list screen, tap a phonebook entry you want to delete and tap , then tap [Delete]u[OK].Checking My profile and editing information1On the phonebook list screen (P.100), tap "My profile" tab.2Tap [Edit].3On the My profile screen, enter necessary information such as name.･Tap [Add] to set phone number or mail address, and tap [Set] to add SNS or Blog account. Tap in "Others", tap [Add] of an item you want to register, and then enter.4Tap [Save].❖Information･You can register multiple phone numbers, mail addresses, SNS/Blog accounts, etc. in My profile.･Name card data created with name card creator application can be saved to My profile and be exchanged via network. When you use for the first time, in the phonebook list screen, tap the "My profile" tab, [Create new] and follow the onscreen instructions.Sending phonebook entries via infrared communication1On the phonebook list screen (P.100), tap , then tap [Others]u[Send via Infrared].･To send an entry, tap [Send one], select entry to send then tap [OK]u[OK].･To send all phonebook entries, tap [Send all] u Tap [Start], enter docomo apps password, tap [OK], then enter the same authentication password as that of the recipient and tap [OK] u [OK] u [OK].❖Information･When sending all phonebook entries via infrared communication, you need to enter authentication password an docomo apps password. Authentication password is a 4-digit number fixed up between you and other party in advance. For the docomo apps password, see "docomo apps password" (P.148).･To activate infrared communication in a selected phonebook entry, tap in the profile screen, [Infrared]u[OK]u[OK]. To send My profile, tap "My profile" tab in the phonebook entry list screen, tap , [Send via infrared]u[OK]u[OK]. If a name card is stored in My profile, tapping [Send via infrared] opens a screen to select "send my profile" or "Exchange name card (via infrared)".･Phonebook entries can be sent using "Infrared" app. For details, refer to "Sending data via infrared communication" (P.165).](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-108.png)
![107PhoneSending phonebook via Bluetooth/Email/GmailRegistered phonebook and My profile information can be sent using Bluetooth function (P.167), or email attachment function.■ Sending phonebook1On the phonebook list screen (P.100), tap a phonebook entry you want to send.2On the profile screen, tap and [Share].3Select a sending method.･After this step, follow the onscreen instructions.■ Sending phonebook entry currently displayedSend all entries displayed in the phonebook list screen. For conditions for displaying phonebook entries, see "Changing accounts to display" (P.102).1On the phonebook list screen (P.100), tap , then tap [Others]u[Import/Export].2Tap [Share phonebook data].3Select a sending method and tap [Always]/[Just once].･After this step, follow the onscreen instructions.■ Sending My profile1On the phonebook list screen (P.100), tap "My profile" tab.2Tap and [Share].3Select a sending method.･After this step, follow the onscreen instructions.❖Information･To use Bluetooth function, turn on Bluetooth function (P.168) in advance, or select [Bluetooth]u[Turn on] in Step 3.･To use email, you need to make settings of your email account (P.113).･If you want to send it as an Email/Gmail attachment, send from a mail composing screen in an account you have set up. If you do not set a Gmail account, a setting wizard appears. After an account is set, you can create and send mails.･You cannot send some information such as name card data set in phonebook.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-109.png)
![108PhoneYou can export/import phonebook entries from/to a microSD card or docomo mini UIM card. This is useful, for example, when you want to move the contact information to another phone.❖Information･You can also use a synchronization service for synchronizing your phonebook. For details, refer to "Setting Auto-sync" (P.159).Exporting phonebook to microSD card･Insert a microSD card in advance (P.33).1On the phonebook list screen (P.100), tap , then tap [Others]u[Import/Export].2Tap [Export to SD card].3Tap any of [Export one contact data]/[Export some contact data]/[Export all contact data], then tap [OK].･When you tap [Export one contact data]/[Export some contact data], mark a contact to export and tap [OK].4Select [No]/[Yes] for attaching name card.5Tap [OK].Exporting/Importing phonebook entries](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-110.png)
![109PhoneImporting phonebook from microSD card･Insert a microSD card in advance (P.33).1On the phonebook list screen (P.100), tap , then tap [Others]u[Import/Export].2Tap [Import from SD card].･When you set a Google account etc., you can select that account as an import account.･If there is only one vCard file, the file is imported immediately.3Tap any of [Import one phonebook data]/[Import multiple phonebook data]/[Import all phonebook data], then tap [OK].･If you tap [Import one phonebook data]/[Import multiple phonebook data], mark vCard files to import, then tap [OK].･If a file has multiple phonebook entries, they are imported all at once.❖Information･For some phonebook entries, a part of data may not be imported or exported.Importing phonebook entries from docomo mini UIM card･Insert a docomo mini UIM card in advance (P.31).1On the phonebook list screen (P.100), tap , then tap [Others]u[Import/Export].2Tap [Import from SIM card].･When you set a Google account etc., you can select that account as an import account.3Tap a phonebook entry to import.･Phonebook entries are imported.･Alternatively, touch and hold a contact to be imported, tap [Import].･To import all phonebook entries, tap and [Import all].❖Information･Names and phone numbers can be imported.･If there is a phonebook entry whose name is matched with the imported entry, the entry is imported as a separated one.･To export phonebook entries to docomo mini UIM card, use "Contacts" app of Xperia™. Note that only name and the first phone number can be saved because of memory space of docomo mini UIM card. For some phonebook entries, a part of data may not be exported.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-111.png)
![110Mail/Web browserMail/Web browserSend/receive mails using DOCOMO mail address (@docomo.ne.jp).You can use pictogram and Deco-mail. Mails can be received automatically. For details on sp-mode mail, refer to "ご利用ガイドブック (spモード編) (Mobile Phone User's Guide [sp-mode]) (in Japanese only)".1From the Home screen, tap .2Flick the screen upwards, then tap [ダウンロード (Download)].･After this step, follow the instructions on the screen.❖Information･sp-mode mail data can be backed up in a microSD card using "ドコモバックアップ (docomo backup)" app. For information on backing up, see "ドコモバックアップ (docomo backup)" (P.238).You can send and receive text messages up to 70 two-byte characters (up to 160 one-byte characters) with a mobile phone number as the destination.1From the Home screen, tap , then tap [Messaging].2Tap (New mail).3Enter the recipient's phone number.･Tap to display the contacts list screen to select from registered contacts. When you enter a name or phone number in the box at the top of the screen, a list of contacts matching the entered numbers or letters appears.4Tap [Write message] and enter a message.･Tap and [Select message template] to enter by selecting message template registered in "Message template settings" (P.112).･When the number of entered characters comes close to a limit, a number of enterable characters appears on the upper left of the text box.5Tap [Send].sp-mode mailMessage (SMS)Sending message (SMS)](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-112.png)
![111Mail/Web browser❖Information･For the character entry, see "Character entry" (P.51).･You can also send/receive text messages to/from customers of overseas network operators. For details, see "Mobile Phone Users Guide [International Services]" or the DOCOMO International Services website.･To send SMS to users of overseas network operators, enter "+", "Country code" and then "the recipient mobile phone number". Enter the phone number without a leading "0", if any. Alternatively, enter "010", "Country code" then "the recipient mobile phone number" in order.To reply to the received SMS overseas, you need to create a new message (SMS). To send a message, in Step 3, enter "010", "Country code" then "the recipient mobile phone number" in order.1From the Home screen, tap , then tap [Messaging].･Messages (SMS) appear per sender. Senders with unread messages (SMS) left are displayed in bold font.2Select a sender whose messages (SMS) you want to read.･A message (SMS) appears.❖Information･When you receive a message (SMS), appears on the status bar. To read the message (SMS), drag the status bar downward and tap a notification of message (SMS).･Tap / in a message (SMS) to add star. To check starred messages (SMS) in a list, tap from the Home screen, tap [Messaging], then tap and tap [Starred messages].1From the Home screen, tap , then tap [Messaging].2Tap of phone number to save and tap [Save].3Tap [Register new] or a phonebook to add.･When you set Google account etc., tap [Register new] to select the account as a saving location.4Enter required items and tap [Save].❖Information･For a sender registered to the phonebook, tap or photo (image) in Step 2 to make a call or display the phonebook entry.Receiving and reading message (SMS)Saving phone number of message (SMS) to Phonebook](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-113.png)
![112Mail/Web browser1From the Home screen, tap , then tap [Messaging].2Tap and [Settings].* While the silent mode (mute) is set, the terminal does not vibrate when receiving a message (SMS).1From the Home screen, tap , then tap [Messaging].2Tap a sender/recipient whose messages (SMS) you want to delete.3Touch and hold a message (SMS) you want to delete.4Tap [Delete message]u[Delete].❖Information･To delete several messages (SMS), in Step 3, tap , tap [Delete messages], and mark messages (SMS) you want to delete, then tap and tap [Delete].･To delete all messages (SMS), in Step 3, tap and [Delete messages], then at the top of the screen, tap [X selected]u[Mark all], then tap and [Delete].1From the Home screen, tap , then tap [Messaging].2Touch and hold a sender/recipient you want to delete.･The sender/recipient to be deleted is marked. To mark all senders/recipients, tap [X selected]u[Select all].3Tap and [Delete].Changing settings for Messaging (SMS)Notification toneSet ringtone when receiving a message (SMS).NotificationsSet whether to show message (SMS) arrival notification in the status bar.Notification vibration*Set whether to vibrate when receiving a message (SMS).Notification lightSet whether to notify message (SMS) reception by notification LED.Delivery reportSet whether to mark a message (SMS) you sent each time a recipient receives the message (SMS).Message template settingsRegister phrase that can be inserted when writing a text.SIM messagesManage messages (SMS) saved to docomo mini UIM card.Push settingsSet a message (SMS) sent from the provider.SMS center numberCheck SMS center number.Deleting a message (SMS)Deleting messages (SMS) by sender/recipient](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-114.png)
![113Mail/Web browser❖Information･In Step 2, tap and tap [Delete conversations] to select senders/recipients and delete their messages (SMS) or to delete all senders'/recipients' messages (SMS).You can create an email account provided by mopera U mail, a POP3 or IMAP compatible email account provided by general ISP (provider), or an Exchange ActiveSync account to send or receive email.You can set multiple Email accounts.Set an Email account following the onscreen instructions.For mopera U mail setting procedure, see "Using mopera U Mail" (P.119).1From the Home screen, tap , then tap [Email].2Enter your email address and password.3Tap [Next].･To set up an email account manually, tap [Manual setup] and follow the onscreen instructions.4Set Inbox check frequency, mark required items and tap [Next].･If a screen for selecting type of account appears, tap an email account type and follow the onscreen instructions to set.5Enter account name and name displayed on emails you send, and tap [Next].･Inbox for set email account appears.･If you set an Exchange ActiveSync account, a name displayed for email cannot be set. Set up from "Your name" (P.117) on email account settings after email initial settings is complete.❖Information･If you need to make the settings manually, contact your email service provider or system administrator for the correct email account settings.･If you set an Exchange ActiveSync account as an email account, and if server manager sets Remote wipe, the data saved in the terminal may be deleted.EmailMaking initial setting for Email](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-115.png)
![114Mail/Web browser1From the Home screen, tap , then tap [Email].2Tap (Compose).3Enter the email address of recipient.･Tap to display the contacts list screen to select from registered contacts. When you enter a name or email address in the search box at the top of the screen, a list of contacts matching the entered numbers or letters appears.･To enter multiple email addresses directly, separate with a comma (,) and then enter the next email address.･To add Cc or Bcc recipients, tap and tap [Show Cc/Bcc].4Enter a subject and message.5Tap (Send).❖Information･To attach a file, while creating an email, tap and attach a file in the following step.･While creating a mail, tap and tap [Save draft] to save a mail as a draft. Also, if you view another screen while creating an email, the email is automatically saved as a draft (for saving an email without recipient or subject, or without message text or attachment as a draft, tap x).･In sent/received emails, a communication data is also included other than text and image displayed on the screen and charges will apply to the data.･Email is handled as an email from a PC. You cannot send or receive email if "Reject emails from PCs" is set on a recipient terminal.Creating and sending emailAdd pictureSelect a file from the saved image file list to attach it.Take photoStart the camera to take a photo and attach it.Add videoSelect a file from the saved video file list to attach it.Record videoStart the camera to shoot a video and attach it.Add sound WALKMAN : Select a file from the saved music file list to attach it.Sound Recorder : Record a voice message and attach it.Add filesSelect files from a saved file list to attach.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-116.png)
![115Mail/Web browser1From the Home screen, tap , then tap [Email].･If you have already set an email account, tap [Inbox] to select an email account to receive.2In the Inbox, tap .3Tap an email you want to read.･Email message appears.❖Information･The sender name of a received email is the name set on sender's terminal.･If you set "Email notifications" in Account settings (P.117) and set "Inbox check frequency" to an item other than "Manual", appears in the status bar when you receive a new email. Drag the status bar downwards to read the received email.･If you set "Inbox check frequency" in Account settings (P.117) to an item other than "Manual", and if you are using the pay-as-you-go data communication, you may be charged every time you check your email.･Tap an address of received email to register the address to the phonebook. For addresses already registered to the phonebook or Google Talk, displaying the phonebook entries, selecting an application to create mail, etc. are available.･In the Inbox or the email message screen, tap to add star and the email is added to "Starred" folder. To check starred emails in a list, in the Inbox, [Inbox]u[Show all folders]uTap [Starred].･To add star to multiple emails, in the Inbox, mark emails you want to add stars, then tap at the bottom right of the screen.Changing Inbox viewTurn Preview pane on and turn the terminal sideways to show preview of email message. To switch to the landscape view, turn Auto-rotate screen on beforehand (P.48).1From the Home screen, tap , then tap [Email].2Tap and [Settings]u[General]u[Preview pane].3Tap [Landscape].❖Information･If you have two or more accounts, change made in any of the accounts applies to all accounts.Receiving and reading email](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-117.png)
![116Mail/Web browser1From the Home screen, tap , then tap [Email].2Tap email with attached files and tap .･The attached file list is displayed. When attached file is not loaded, tap [Load].3Tap [Save] of file you want to save.･Tap [View] or [Play] to view or play the attached file.❖Information･The attached file is saved on the internal storage.1From the Home screen, tap , then tap [Email].2Tap email to reply or forward and tap .3Tap any of [Reply]/[Reply all]/[Forward].･When you tap [Forward], enter an email address to forward.4Enter a message.5Tap (Send).❖Information･When you reply or forward an email, the original message contents for replying or forwarding is quoted. To delete the quoted message text, unmark "Include original text".･When you forward an email, the attachment file of the original message is quoted. To cancel quoting attached file, tap .1From the Home screen, tap , then tap [Email].2Tap an email to delete.3Tap and [Delete].❖Information･To select and delete several emails, in Inbox, mark emails you want to delete, tap and [Delete]. Mark at least 1 email and tap [X selected]u[Mark all] to mark all emails.Saving attachment file of emailReplying/forwarding emailDeleting email](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-118.png)
![117Mail/Web browser1From the Home screen, tap , then tap [Email].2Tap and [Settings].3Tap an Email account you want to change the settings for.*1 Appears when Gmail account (@gmail.com) is set.*2 While the silent mode (mute) is set, the terminal does not vibrate when receiving an email.❖Information･The items vary depending on the account type.･You can also set "Out of office", "Days to sync", "Sync contacts", and "Sync calendar" for an Exchange ActiveSync account. "Outgoing settings" is not required.･If you set "Inbox check frequency" to an item other than "Manual", and if you are using the pay-as-you-go data communication, you may be charged every time you check email.･If you tap [General] in Step 3, you can change whole "Email" app settings.Changing Email account settingsAccount nameChange account name.Your nameChange your name (sender name).SignatureChange your signature.Quick replyRegister phrase that can be inserted when creating an email.Default accountSet to the default account to send email, if you set two or more email accounts.Inbox check frequencySet whether to check new messages automatically and intervals of automatic check.Auto download attachments*1Set whether to download attached file automatically when connecting via Wi-Fi.Email notificationsSet whether to show email arrival notification in the status bar.Select ringtoneSet ringtone when receiving an email.Vibrate*2Set whether to vibrate when receiving an email.Notification lightSet whether to notify email reception by notification LED.Incoming settingsSet mail server for receiving.Outgoing settingsSet mail server for sending.Delete accountDelete Email account.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-119.png)
![118Mail/Web browser1From the Home screen, tap , then tap [Email].2Tap [Inbox]u[Add account].3Enter your email address and password.･If required, mark "Send email from this account by default.".4Tap [Next].･To set up an email account manually, tap [Manual setup] and follow the onscreen instructions.5Set Inbox check frequency, mark required items and tap [Next].･If a screen for selecting type of account appears, tap an email account type and follow the onscreen instructions to set.6Enter account name and name displayed on emails you send, and tap [Next].･Inbox for set email account appears.･If you set an Exchange ActiveSync account, a name displayed for email cannot be set. Set up from "Your name" (P.117) on email account settings after email initial settings is complete.❖Information･If you need to make the settings manually, contact your email service provider or system administrator for the correct email account settings.･If you set an Exchange ActiveSync account as an email account, and if server manager sets Remote wipe, the data saved in the terminal may be deleted.･Tap [Inbox] to display a list of set accounts. Tap [Combined view] to display combined Inbox for all accounts.Setting another Email account](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-120.png)
![119Mail/Web browser1From the Home screen, tap , then tap [Email].2Tap and [Settings].3Tap an account to delete.4Tap [Delete account]u[OK].mopera U users can use mopera U Mail.For mopera U setting procedure, see "Setting mopera U" (P.139).Mail box capacity of mopera U mail is 50 MB. It supports both POP mail and IMAP mail. Also, the Web mail system is available.■ POP mail1From the Home screen, tap , then tap [Email].･If you already set an Email account, tap [Inbox]u[Add account].2Enter mopera U mail address and mopera U password, then tap [Manual setup]/[Next].･If you tap [Next], it changes automatically to POP3 account. Go to Step 4.3Tap [POP3] from the type of the mail account.4Check that you have entered "User name" and "Password" for mopera U correctly, and "mail.mopera.net" for the POP3 server.･If you tap [Next] in Step 2, "mail.mopera.net" is entered in the POP3 server field.5Select the security type.･When you do not set security, select "None".6Confirm the entry, then tap [Next].Deleting Email accountUsing mopera U Mail](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-121.png)
![120Mail/Web browser7Enter "mail.mopera.net" for the SMTP server and confirm the entry of "User name" and "Password" for mopera U.･If you tap [Next] in Step 2, you need to mark "Require sign–in" to check entered "User name", "Password" for mopera U.･If you tap [Next] in Step 2, "mail.mopera.net" is entered in the SMTP server field. Set "587" in the Port field.8Tap [Next].9On the account setting screen, set Inbox check frequency, etc. and tap [Next].10On the account setting screen, enter a display name for sending mail and tap [Next].･The mailer is displayed and the set mail account is available.❖Information･When "Require sign-in." is unmarked on the SMTP server setting screen, sending mails is not available. Mark "Require sign-in.".You can use Gmail to send and receive emails. To use Gmail, you need to set up a Google account. For details, refer to "Setting Google account" (P.156).･After you set Google account, tap [Sync Gmail] of sync items for Google account (P.157).1From the Home screen, tap , then tap [Gmail].･If you do not set Google account sync, "Account not synced" screen appears. Follow the onscreen instructions.2On the Inbox tray, tap .･Synchronizing "Gmail" app in the terminal with your Gmail account starts, and the Inbox is refreshed.GmailRefreshing Gmail](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-122.png)
![121Mail/Web browserYou can use Google Talk instant messaging to chat with friends. To use Google Talk, you need to make settings of your Google account. For details, refer to "Setting Google account" (P.156).Signing in is unnecessary if you have already set a Google account.1From the Home screen, tap , then tap [Talk].2Tap [Existing] and enter user name and password.3Tap .･After this step, follow the onscreen instructions.❖Information･For details on Google Talk, from the Google Talk screen, tap and then tap [Help] to refer to.It is a service with which you can receive earthquake early warning, etc. delivered by the Meteorological Agency.･Area Mail is a free service for which subscription is not required.･Area Mail cannot be received in the following case.- During a voice call- Out of service area- While power is off- During International roaming-During Airplane mode- While updating software - When a SIM other than by DOCOMO is inserted - While sending/receiving a message (SMS)･Area Mail may not be received when tethering is set or during packet communications.･Area Mail that could not be received cannot be received later.Google TalkSigning in Google TalkEarly Warning "Area Mail"](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-123.png)
![122Mail/Web browserA notification content screen appears and you are notified by buzzer sound or dedicated ringtone and vibration.1Receive Area Mails automatically.2A dedicated ring tone sounds and notification LED flashes when an Area Mail is received.･Ringtone and ringtone volume cannot be changed.･The notification LED blinks only when backlight is off.3A message body of Area Mail appears automatically.View received Area Mail later1From the Home screen, tap , then tap [Disaster kit].･When you activate for the first time, "ご利用にあたって (Terms of use)" appears. Tap [Agree] to start using.2Tap [Early Warning "Area Mail"].3Select an Area Mail from the Area Mail list.･You can view message of Area Mail.1From the Home screen, tap , then tap [Disaster kit].2Tap [Early Warning "Area Mail"].3Tap and then [Settings].❖Information･Area Mail cannot be set when docomo mini UIM card is not inserted.Receiving Early Warning "Area Mail"Setting Early Warning "Area Mail"Receive settingSet whether to receive Area Mails.Beep toneSet sounding time for Area Mail reception and whether to sound a dedicated ringtone even in silent mode.Check screen image and beep toneCheck the ringtone and screen for reception of earthquake early warning, tsunami warning or disaster/evacuation information.Other settingsSet receiving/deleting Area Mail other than earthquake early warning, tsunami warning and disaster/evacuation information.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-124.png)
![123Mail/Web browserYou can view web pages using web browser like on a PC.Web browser can be used via packet communication or Wi-Fi network.1From the Home screen, tap .･A browser screen appears.❖Information･Alternatively, from the Home screen, tap , then tap [Chrome] to access the Internet to view web pages.Moving to a web page1Tap the address entry field on the top of the web page in the Browser screen.･If web page address entry field is not displayed, flick down the screen to display.2Enter a web page address or keyword to search.･As you enter an address or characters, retrieved web pages list appears.3Tap the displayed candidates list or [確定(OK)] on the keyboard u[実行(Go)].･You can move the web page.❖Information･In Step 2, you can tap in the address entry field to enter search words by voice and search a web page.Going back to the previous page1Tap x.Adding a new tabOpen multiple tabs and view web pages.1On the Browser screen, tap and .･A new tab opens in the default home page.Web browserOpening BrowserDisplaying web pages](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-125.png)
![124Mail/Web browserOpening new incognito tabYou can view web pages without browser history or search history.1On the Browser screen, tap and .2Tap [New incognito tab].･A new tab opens and descriptions for the incognito mode appear.3Display a web page.･For information on displaying web page, see "Moving to a web page" (P.123).❖Information･ is displayed in the upper part of the screen while viewing in the incognito tab.･Web pages you view in the incognito tab does not appear in the history. When the tab is closed, the record of Cookies etc. is erased. Downloaded files or bookmarked web pages are saved even for the incognito tab.Switching tabs1On the Browser screen, tap and then tap a tab you want to display.Closing a tab1On the Browser screen, tap and then tap of a tab to close.･Alternatively, flick a tab left or right to close it.Zooming in/out a web page1Pinch in/out on the browser screen.❖Information･Alternatively, double-tap the browser screen to zoom in.･Web pages created to fit to the screen cannot be zoomed in/out.Searching text in a web page1On the Browser screen, tap and tap [Find on page].･The search bar appears in the upper part of the screen.2Enter a search word.･When you enter characters, matching characters are emphasized.･Tap / to move to next/previous matched item.❖Information･Tap to close the search bar.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-126.png)
![125Mail/Web browserCopying text in a web page1On the Browser screen, touch and hold text you want to copy.2Drag or to select a range of text to copy.･Selected text is highlighted in blue.3Tap (Copy).･A message "Text copied to clipboard." appears.4Touch and hold the entry field on the pasting location, and tap [PASTE].❖Information･On some web pages, selecting characters may not be available.You can make settings for homepage, privacy and security, page display, etc.1On the Browser screen, tap and [Settings].2Select an item to change.Setting a home pageSet home page for opening new tab.1On the Browser screen, tap , then tap [Settings]u[General].2Tap [Set homepage] to select an item you want to set as home page.1Open the web page you want to operate the links.2Tap a link.･Link is highlighted and move to linked web page.❖Information･When you touch and hold a link including a link or image, or image, "Open", "Open in new tab", "Save link", "Copy link URL", "Select text", "Save image", "View image", "Set as wallpaper" and "Share link" appear.･When you download a file by "Save link" from websites which require Basic authentication or SSL session, the downloading may be failed.･Browser recognizes some phone numbers that allow you to call the phone number. Tap the phone number to call.Changing Browser settingsOperating links](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-127.png)
![126Mail/Web browserYou can check history, save bookmarks, etc.Bookmarking a web page1On the Browser screen, display the web page you want to bookmark.2Tap and [Save to bookmarks].3Set label etc. and tap [OK].･You can set the following options.Opening a bookmark1On the Browser screen, tap and [Bookmarks].2Tap the bookmark you want to open.❖Information･Touch and hold a bookmark to edit or delete it.Checking history1On the Browser screen, tap and tap [Bookmarks]u"History" tab.2Tap the time you browsed the web page, such as [Today] or [Yesterday].･To check your most visited web pages, tap [Most visited].･Tap a history to open a web page.❖Information･On the Browser screen, touch and hold x to check the history.Managing bookmarks and historyLabelSet a name displayed to the bookmark.AddressSet URL saved to the bookmark.AccountWhen you set a Google account etc. and sync with the browser, you can select the account as a bookmark saving location.Add toAdd a shortcut of the bookmark on the Home screen or create a folder.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-128.png)
![127Mail/Web browserClearing history1On the Browser screen, tap and tap [Bookmarks]u"History" tab.2Tap a time when you viewed, touch and hold a history you want to delete, then tap [Remove from history].❖Information･To delete history, tap on the browser screen and [Settings]u[Privacy & security]u[Clear history]u[OK].･To delete temporary Internet files such as cache, on the Browser screen, tap and tap [Settings]u[Privacy & security] and set each item.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-129.png)
![128SettingsSettings1From the Home screen, tap , then tap [Settings].■ Setting menu❖Information･Alternatively, from the Home screen, tap and then tap [Settings], or drag the status bar downwards and tap [Settings] to display the Settings screen.You can make settings related to networks such as Wi-Fi, Bluetooth function.Using the Wi-Fi function, you can connect to an access point for your home, company network or public wireless LAN services to use mail and Internet.･Even when Wi-Fi is on, packet communication is available. However, while you connect Wi-Fi network, Wi-Fi comes first.･When a Wi-Fi network is disconnected, connection is automatically switched to a LTE/WCDMA/GSM network mode. Note that packet communication fee may apply if network connection stays switched.･Turn the Wi-Fi function to off when you do not use Wi-Fi to cut battery power consumption.･If you start Wi-Fi connection while using Wi-Fi Direct function (P.132) or during Screen mirroring (P.147), Wi-Fi Direct function/Screen mirroring is terminated.Viewing the setting menuWIRELESS & NETWORKSP. 1 2 8DEVICEP. 1 4 0PERSONALP. 1 4 8ACCOUNTSP. 1 5 6SYSTEMP. 1 6 0Wireless & networksWi-FiP. 1 2 8BluetoothP.132, P.167Data usageP. 1 3 3More... Airplane modeP. 1 3 4VPNP. 1 3 5Tethering & portable hotspotP. 1 3 6Media server settingsP. 1 7 5Location-based Wi-FiP. 1 3 8Mobile networksP.138, P.244NFC/Osaifu-Keitai settingsP. 1 8 0Wi-Fi](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-130.png)
![129SettingsBefore using Wi-FiTo use Wi-Fi function, turn on Wi-Fi and search available Wi-Fi network, then connect it.･To access the Internet using Wi-Fi function, connect to Wi-Fi network in advance.❖Information･Make sure to receive signal strong enough for using Wi-Fi function. The signal strength of the Wi-Fi network varies by the location of the terminal. Moving closer to the Wi-Fi router might improve the signal reception.■ Reception interference caused by Bluetooth devicesBluetooth devices and wireless LAN (IEEE802.11b/g/n) devices use the same frequency band (2.4GHz). If you use Bluetooth devices near a wireless LAN device, reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem. Communication may be interrupted or sound may be lost while streaming data, etc. In these cases, do the following:･Keep the terminal and Bluetooth device to be connected wirelessly 10 or more meters away from a wireless LAN device.･Within 10 meters, turn off the Bluetooth device to be connected.Turning on Wi-Fi1From the Settings screen (P.128), tap of Wi-Fi or drag it to the right.❖Information･It may take a few seconds before the Wi-Fi connection is on.･Alternatively, drag the status bar downwards and tap [Wi-Fi] to turn on/off Wi-Fi function.Connecting to a Wi-Fi network1From the Settings screen (P.128), tap [Wi-Fi].･Available Wi-Fi networks or secured Wi-Fi networks are displayed.2Select a Wi-Fi network to connect.･To connect to a protected Wi-Fi network, enter the password and tap [Connect].･To connect Wi-Fi network with WPS compatible device, tap , or tap , then tap [WPS Pin Entry]. Follow the onscreen instructions.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-131.png)
![130Settings❖Information･The next time you connect to a Wi-Fi network, the password is saved in the terminal.･If you enter a wrong password (security key) when selecting an access point to connect, any of the following appears.-Saved, Secured with WEP- Saved, Secured with WPA/WPA2- Saved, Secured with 802.1x- Avoided poor Internet connection*- Authentication problem- Limited connectivity* It may take 5 minutes or more to display the message after [Connect] is tapped.Check a password (security key).When any of above messages appears even if you enter a correct password (security key), the correct IP address may not have been acquired. Check the signal status and reconnect.･To use docomo service via Wi-Fi, setting "Wi-Fi option password" is required. To set, from the Settings screen (P.128), tap [docomo service]u[Wi-Fi settings for docomo apps]u[Wi-Fi option password].■ Wi-Fi network status icons on status barThe following icons appear according to the Wi-Fi network connection status.* Without connected to Wi-Fi network, you need to set Wi-Fi Network notification to on beforehand (P.131).Disconnecting a Wi-Fi network1From the Settings screen (P.128), tap [Wi-Fi].2Tap the Wi-Fi network that is currently connected.3Tap [Forget].Wi-Fi network statusWhen you are connected to a Wi-Fi network or when there are Wi-Fi networks available in your vicinity, you can see the status of these Wi-Fi networks. You can also set the terminal to notify you when an unsecured Wi-Fi network is detected.･You need to turn on the Wi-Fi setting beforehand depending on setting (P.129).Appears when connected to Wi-Fi network.Appears when communicating via Wi-Fi network.Appears when connected to Wi-Fi network using Auto IP function.Appears when any open network within the service area is detected.*](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-132.png)
![131SettingsSetting the Wi-Fi open network notification to ON1From the Settings screen (P.128), tap [Wi-Fi].2Tap and [Advanced].3Mark "Network notification".Scanning for Wi-Fi networks manually1From the Settings screen (P.128), tap [Wi-Fi].2Tap and [Scan].･Scanning Wi-Fi networks starts.3Tap a Wi-Fi network in the list to connect.Adding a Wi-Fi network manually1From the Settings screen (P.128), tap [Wi-Fi].2Tap and enter a network SSID of the Wi-Fi network you want to add.3Tap "Security" setting item and tap a security type of the Wi-Fi network you want to add.･4 options, "None", "WEP", "WPA/WPA2 PSK", or "802.1x EAP", appear.4If required, enter security information for the Wi-Fi network you want to add.5Tap [Save].Viewing detailed information on a connected Wi-Fi network1From the Settings screen (P.128), tap [Wi-Fi].2Tap the Wi-Fi network that is currently connected.･The detailed network information is displayed.❖Information･In Step 2, tap , then tap [Advanced] to enable/disable Auto IP support or check "MAC address" and "IP address".Changing Wi-Fi sleep policyYou can choose to disable the Wi-Fi function in the terminal when the screen backlight turns off. You can also set the terminal to always turn on the Wi-Fi function or to always turn it on when the terminal is charged.1From the Settings screen (P.128), tap [Wi-Fi].2Tap and [Advanced].3Tap [Keep Wi-Fi on during sleep].](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-133.png)
![132Settings4Tap any of [Always]/[Only when plugged in]/[Never (increases data usage)].❖Information･When a Wi-Fi network is disconnected, connection is automatically switched to a LTE/WCDMA/GSM network mode.Using Wi-Fi Direct compatible deviceYou can connect among the devices compatible with Wi-Fi Direct via Wi-Fi even without configuring access point.1From the Settings screen (P.128), tap [Wi-Fi].2Tap and [ Wi-Fi Direct].･A list of detected Wi-Fi Direct devices appears.3Select a Wi-Fi Direct compatible device name to connect.･If a note appears, tap [OK].･Tap [Search for devices] to refresh the detection list.･To change the terminal name displayed on the detected Wi-Fi Direct compatible device, tap [Rename device].❖Information･To use the Wi-Fi Direct function, you need an application compatible with Wi-Fi Direct function. The function becomes available when you install a compatible application.･If you start Wi-Fi Direct connection during Wi-Fi connection, Wi-Fi connection is disconnected and switched to packet communication (LTE/WCDMA/GSM).Connect Bluetooth device wirelessly using Bluetooth function. For details on Bluetooth communication, see "Using Bluetooth function" (P.167).Bluetooth](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-134.png)
![133SettingsEnable/Disable mobile data communication or set data usage limit.❖Information･You can check communication volume for each application. For some applications, the settings can be displayed.Enabling mobile data communication1From the Settings screen (P.128), tap [Data usage].2Tap of Mobile data communication or drag it to the right.3Read the note and tap [Yes].❖Information･Alternatively, drag the status bar downwards and tap [Mobile data] to turn on/off mobile data communication.Setting data usage limit1From the Settings screen (P.128), tap [Data usage].2Tap [Set mobile data limit] and read the notes, and then tap [OK].･"Set mobile data limit" is marked.❖Information･Note that mobile data communication will be disabled when data usage volume reaches to the limit.･Change the setting value for data usage limit and the value for alert by dragging the right end of each bar in the graph.Setting Data usage cycle1From the Settings screen (P.128), tap [Data usage].2Tap "Data usage cycle" setting item and tap the set period/[Change cycle...].･When you tap [Change cycle...], select reset date and tap [Set].Permitting data roaming1From the Settings screen (P.128), tap [Data usage].2Tap and [Data roaming], then read the notes and then tap [OK].･"Data roaming" is marked.Data usage](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-135.png)
![134SettingsRestricting background data1From the Settings screen (P.128), tap [Data usage].2Tap and [Restrict background data], then read the notes and then tap [OK].･"Restrict background data" is marked.❖Information･To restrict use of specified Wi-Fi network, in Step 2, tap and tap [Mobile hotspots], then mark a Wi-Fi network you want to restrict.Displaying Wi-Fi usage status1From the Settings screen (P.128), tap [Data usage].2Tap and mark "Show Wi-Fi usage".･"Wi-Fi" tab is displayed and tap it to check Wi-Fi usage condition.In this mode, the functions of using radio wave transmissions such as calling, accessing to the Internet (including sending/receiving mails), etc. are disabled. It is useful when you want to operate the terminal with no interruption of incoming calls or mails.Turning on Airplane mode1From the Settings screen (P.128), tap [More...].2Mark [Airplane mode].･When you unmark "Airplane mode", the Airplane mode turns off.❖Information･Alternatively, press and hold P for over a second and then tap [Airplane mode] in the pop-up screen, or drag the status bar downward and tap [Airplane] to set Airplane mode to on/off.･Even if Airplane mode is on, Wi-Fi, Bluetooth function and NFC Reader/Writer, P2P function can be turned on. Be careful not to use Wi-Fi, Bluetooth, NFC Reader/Writer, P2P functions in a place where the use is prohibited such as in a airplane or hospital.Airplane mode](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-136.png)
![135SettingsVirtual Private Network (VPN) is a technology to connect to the information in a protected local network from another network. Generally, VPNs are provided to companies, schools and other facilities. A user can access to the information in the local network from outside of the premises.To set up a VPN access from the terminal, you need to retrieve the information related to security from your network administrator. For details, see the following website.http://www.sonymobile.co.jp/support/ (In Japanese only) ❖Information･If you set sp-mode as an ISP, you cannot use PPTP.Adding a VPN1From the Settings screen (P.128), tap [More...]u[VPN].･When the note appears, follow the onscreen instructions to set unlocking method of screen lock. For details, see "Setting screen unlock method" (P.152).2Tap [Add VPN profile].3When an editing screen is displayed, follow the instruction of the network administrator to enter/set required items of VPN settings.4Tap [Save].❖Information･Added VPNs can be edited/deleted.To edit VPNs, touch and hold a VPN you want to change, then tap [Edit profile]. Change the VPN settings as required and tap [Save]. To delete, touch and hold a VPN you want to delete, then tap [Delete profile].Connecting to a VPN1From the Settings screen (P.128), tap [More...]u[VPN].2Tap a VPN to connect to.3Enter required authentication infromation and tap [Connect].･When you are connected to a VPN, appears in the status bar.Disconnecting a VPN1Drag the status bar downwards.2Tap a notification that indicates VPN connected.3Tap [Disconnect].Connecting to a VPN (Virtual Private Network)](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-137.png)
![136SettingsTethering stands for using mobile devices such as smartphone as modem to allow USB compatible devices or wireless LAN devices to access the Internet.❖Information･Packet communication charge when using tethering varies depending on the charging plan you use. Subscription of packet flat-rate service is highly recommended.･For details on usage charge, see the following website.http://www.nttdocomo.co.jp/english/ ･When the docomo mini UIM card is not inserted, mobile data communication is disabled, or out of service area, USB tethering or Wi-Fi tethering is not available.Setting USB tetheringConnecting the terminal to a USB compatible PC with Micro USB Cable 01 (optional), and using the terminal as a modem, you can connect the PC to the Internet.1From the Settings screen (P.128), tap [More...]u[Tethering & portable hotspot].2Connect the terminal to a PC using a microUSB cable (P.39).･When you connect microUSB cable for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed.･When "PC Companion software" screen appears on the terminal, tap [Skip].3Tap [USB tethering].4Confirm "Details", then tap [OK].･"USB tethering" is marked.❖Information･System requirements (OS) for USB tethering are as follows.- Microsoft Windows 8- Microsoft Windows 7- Microsoft Windows Vista- Microsoft Windows XP*-Linux* For Microsoft Windows XP, installation of PC Companion is required.･During USB tethering, the terminal storage cannot be mounted with a PC.･For details such as method of USB tethering for other OS, see the following website.http://www.android.com/tether#usbUsing tethering function](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-138.png)
![137SettingsSetting Wi-Fi tethering1From the Settings screen (P.128), tap [More...]u[Tethering & portable hotspot].2Tap [Portable Wi-Fi hotspot].3Confirm "Details", then tap [OK].･"Portable Wi-Fi hotspot" is marked.❖Information･If Wi-Fi tethering starts while connecting to Wi-Fi network, Wi-Fi network is disconnected and automatically connected when Wi-Fi tethering ends. Alternatively, when the terminal and DLNA device are connected via Wi-Fi network, starting/ending Wi-Fi tethering affects Wi-Fi connection.･USB tethering and Wi-Fi tethering can be used at the same time.･Alternatively, drag the status bar downwards and tap [Hotspot] to set Wi-Fi tethering function to on/off.･For details on Wi-Fi tethering, see the following website.http://www.android.com/tether#wifiSetting up a portable Wi-Fi hotspotYou can use the terminal as a Wi-Fi access point to connect up to 10 wireless LAN devices to the Internet simultaneously.1From the Settings screen (P.128), tap [More...]u[Tethering & portable hotspot].2Tap [Portable Wi-Fi hotspot settings]u[Configure Wi-Fi hotspot].3Enter a network SSID of the Wi-Fi access point to set.･"Xperia A_XXXX" is set by default.4Tap "Security" setting item and tap a security type of the Wi-Fi network to set.･"None" and "WPA2 PSK" appear.5Enter security information of the Wi-Fi access point to set as required.6Tap [Save].❖Information･By default, the password is set at random. You can change the password as desired.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-139.png)
![138SettingsConnect to Wi-Fi within only neighboring place you registered to reduce the battery power consumption.1From the Settings screen (P.128), tap [More...]u[Location-based Wi-Fi].2Tap of Location-based Wi-Fi or drag it to the right.･When Wi-Fi network is not registered, tap [Set up Wi-Fi] to connect to Wi-Fi (P.129).An access point for connecting to the Internet (sp-mode, mopera U) is already registered. You can add or change it if necessary.By default, sp-mode (P.139) is set for the usual access point.Checking the access point in use1From the Settings screen (P.128), tap [More...]u[Mobile networks]u[Access Point Names].･Available access points (APN) appear.･It is recommended that you use the displayed access point without editing.❖Information･If you have several available connections, a marked radio button to the right indicates the active network connection.Setting an access point additionally1From the Settings screen (P.128), tap [More...]u[Mobile networks]u[Access Point Names].2Tap and [New APN].3Tap [Name], enter a name and tap [OK].4Tap [APN] and enter the access point name and tap [OK].5Tap and enter all other information required by your network operator.6Tap and [Save].Using Location-based Wi-FiSetting an access point](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-140.png)
![139Settings❖Information･Do not change the MCC/MNC. If you change MCC/MNC to other than the default value (440/10), the set new APN does not appear on the APNs screen. When the set new APN does not appear on the APNs screen, tap to make APN settings with "Reset to default" or "New APN" again.･Note that, when using the prediction conversion by one-byte alphabet entry mode (English mode) with mark in "Auto space" (P.67) on Japanese keyboard settings screen, spaces may be entered automatically when the prediction option is confirmed. In this case, delete spaces.By initializing an access point, the default state is restored.1From the Settings screen (P.128), tap [More...]u[Mobile networks]u[Access Point Names].2Tap and tap [Reset to default].sp-mode is ISP for NTT DOCOMO smartphone. In addition to accessing Internet, you can use the mail service using the same address as imode mail (@docomo.ne.jp), etc. sp-mode is a service requiring subscription. For details on sp-mode, refer to NTT DOCOMO website.mopera U is ISP of NTT DOCOMO's Internet connection. If you have subscribed to mopera U, you can use Internet after making the simple settings. mopera U is a service requiring subscription.Setting mopera U1From the Settings screen (P.128), tap [More...]u[Mobile networks]u[Access Point Names].2Mark "mopera U" or "mopera U設定 (mopera U settings)" radio button.･Return to the Home screen and open the Browser. You can enjoy the nice Internet access.❖Information･"mopera U設定 (mopera U settings)" is an access point for setting mopera U. When you use the access point for setting mopera U, packet communication charges for setting do not apply. Note that you can set only the initial setting screen or the change setting screen. For details on mopera U settings, refer to mopera U website.Initializing an access pointsp-modemopera U](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-141.png)
![140SettingsYou can use the network services and search for available networks. For Call settings, see "Call settings" (P.97).Set ringtones, operation sound, vibrator, etc.･For Silent mode, see "Setting Silent mode" (P.49).Adjusting each sound volume1From the Settings screen (P.128), tap [Sound]u[Volumes].･Adjust the volume of following items.- Music, video, games & other media- Ringtone & notifications-Alarms2Drag the slider to the right or left.･Drag the slider to the left for volume down, or to the right for volume up.3Tap [OK].❖Information･Even if alarm volume is set in Volumes, "Alarm volume" (P.235) set in "Alarm & clock" app is given priority.DeviceCall settingsSoundClear Phase™Set sound quality optimized for the built-in speaker.xLOUD™Set audio playback level enhancement technology ("xLOUD") to enjoy powerful sounds with the built-in speaker when playing WALKMAN, YouTube, Album, etc.VolumesP. 1 4 0Phone ringtoneP. 1 4 1Vibrate when ringingP. 1 4 1Notification soundP. 1 4 1Dial pad touch tonesP. 1 4 1Touch soundsP. 1 4 1Screen lock soundSet whether to emit sound for unlocking the screen lock.Vibrate on touchSet whether to vibrate the terminal for some operations such as specified software key operation.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-142.png)
![141SettingsAdjusting the ringtone volume with the volume key1From the Home screen, press up or down of m.･The volume adjustment bar appears, you can adjust the volume up or down.❖Information･You can also press m or P to mute the ringtone for an incoming call.Setting a ringtone/notification sound1From the Settings screen (P.128), tap [Sound]u[Phone ringtone]/[Notification sound].2Select a ringtone/notification sound and tap [Done].❖Information･You can set voice file in ".wav"/".m4a" or in other format which is transferred from Media Go (P.174) or downloaded from the Internet as a ringtone or notification sound.･To set a ringtone or notification sound other than the ones stored by default, tap .Setting vibration when receiving a call1From the Settings screen (P.128), tap [Sound] and mark "Vibrate when ringing".･Ringtone sounds and the terminal vibrates when there is an incoming call.Setting touch tones to ON1From the Settings screen (P.128), tap [Sound].2Mark "Dial pad touch tones"/"Touch sounds".･If you unmark them, any operation tones do not sound when you tap.❖Information･"Dial pad touch tones" is a sound for operations on the dial pad. "Touch sounds" is a sound for selecting menu.･To set the key sound of software keyboard, set from "Setting character entry" (P.65).](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-143.png)
![142SettingsSet brightness, orientation of the screen, etc.* Image quality improving procedure for still pictures is effective only for viewing in the album application.Adjusting the screen brightness1From the Settings screen (P.128), tap [Display]u[Brightness].2Drag the slider to the right or left.･Drag the slider to the left for dimmer screen, or to the right for brighter screen.3Tap [OK].❖Information･Mark "Adapt to lighting conditions" to adjust brightness automatically according to the ambient brightness with reference to the manually set brightness.･Drag the status bar downwards and tap [Backlight] to set the screen brightness to the maximum value, or cancel the setting.Adjusting the idle time before the screen turns off1From the Settings screen (P.128), tap [Display]u[Sleep].2Select a time option before the screen back light turns off.❖Information･To turn the screen back light off immediately, press P.Changing wallpaper of the unlock screen･Only when "Set all to" or "Lock screen" in Preferred apps settings (P.148) to "Xperia™", and set the screen unlock method (P.152) to "Swipe/Touch", you can change the wallpaper.1From the Settings screen (P.128), tap [Display]u[Lock screen].DisplayMobile BRAVIA Engine 2To view photos or movies colorfully and beautifully, set image quality improving procedure (Mobile BRAVIA Engine 2). It adjusts contrast, color shade, etc.*BrightnessP. 1 4 2WallpaperP. 7 8Auto-rotate screenP. 4 8SleepP. 1 4 2Font sizeSet font size.ThemeSet a background for the Home screen, Settings screen, etc.Lock screenP. 1 4 2](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-144.png)
![143Settings2Tap [Wallpaper]u[Album]/[Xperia™ wallpapers].･For details on setting procedure, see Step 2 in "Changing wallpaper" (P.78).Check memory volume of internal storage, microSD card, and USB storage. And you can delete data in the microSD card and USB storage and format.USB storage is an external memory such as a microSD card connected to the terminal using commercially available reader/writer cable.*1 Displayed items vary depending on condition of microSD card or USB storage recognition.*2 Set the unlock method for the screen lock to "PIN"/"Password" in advance (P.152).❖Information･To decrypt SD card, reset the terminal (P.156).StorageINTERNAL STORAGETotal spaceCheck memory space for Apps, Pictures, videos, Audio (music, ringtones, etc.), Downloads, Misc. and available space in the internal storage.SD CARDTotal spaceCheck available memory space etc. of microSD card.Unmount SD card*1Cancel connection of microSD card to remove it safely.Mount SD card*1Have microSD card recognized.Erase SD card*1P. 1 4 4Encrypt SD card*2Delete data in the microSD card and encrypt the microSD card so that it cannot be used on other terminal or a PC.EXTERNAL USB STORAGETotal spaceCheck available memory space of USB storage.Unmount USB storage*1Cancel connection of USB storage to remove it safely.Mount USB storage*1Have USB storage recognized.Clear USB storage*1P. 1 4 4MISCELLANEOUSTransfer data to SD cardTransfer images, videos, music data in the internal storage to the microSD card.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-145.png)
![144SettingsFormatting microSD card1From the Settings screen (P.128), tap [Storage].2Tap [Erase SD card]u[Erase SD card].･Enter your screen unlock method as required.3Tap [Erase everything].❖Information･Formatting microSD card deletes all the data in it.Formatting USB storage･Insert external memory such as a microSD card into commercially available reader/writer cable and connect the cable to the terminal in advance.1From the Settings screen (P.128), tap [Storage].2Tap [Clear USB storage]u[Erase].･Enter your screen unlock method as required.3Tap [Erase everything].❖Information･Formatting USB storage (external memory such as microSD card) deletes all the data in it.Increasing the available memory of the terminalIf the terminal has a small memory, you can perform the following operations to increase available memory.･In the browser, you can clear all temporary Internet files and browser history information. For details, see "Clearing history" (P.127).･Uninstall programs that you no longer use. For details, see "Deleting installed application" (P.146).You can check battery consumption and set Power Saver.Power managementBatteryDisplay battery consumption, remaining battery level, etc.Power SaverSet Power Saver to reduce battery power consumption.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-146.png)
![145SettingsManage and delete installed applications, display memory usage condition, etc. or change the settings.Viewing permitted operation of the applications in the terminalYou can check functions which are permitted to access to each application in the progress of performing, such as network communication function or location information function of the terminal.1From the Settings screen (P.128), tap [Apps].2Tap an application to view.3Flick the screen up to view permitted operations.･If all permitted operations do not appear, tap [Show all].Force-quitting an applicationIf a pop-up window appears to indicate the application does not reply, you can force-quit the application.1From the Settings screen (P.128), tap [Apps].2Tap an application to force-quit.3Tap [Force stop].4Read the notes and then tap [OK].❖Information･When you do not want to force-quite the application, tap [Cancel] and wait for a reply of the application.Deleting all data of the application･Before deleting all installed application data, back up contents related to the application that you want to save including data saved in the application.1From the Settings screen (P.128), tap [Apps].2Tap an application to delete the data.3Tap [Clear data].4Read the notes and then tap [OK].Apps](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-147.png)
![146SettingsDeleting installed application･Before deleting installed application, back up contents related to the application that you want to save including data saved in the application.･Some applications cannot be deleted.1From the Settings screen (P.128), tap [Apps].2Tap an application to be deleted.3Tap [Uninstall].4Tap [OK].5When uninstallation is completed, tap [OK].❖Information･Some applications pre-installed in the terminal cannot be uninstalled. For some applications which cannot be uninstalled, disabling is possible (P.146).･Applications downloaded from Play Store are recommended to be deleted from the Google Play screen (P.180).･Applications can be deleted from the Application screen. For details, see "Uninstalling an application" (P.86).Disabling applicationYou can disable some applications which cannot be uninstalled or services. Disabled applications are not displayed on the Application screen and you cannot execute them, but they are not uninstalled.1From the Settings screen (P.128), tap [Apps].2Flick the screen to the left to display "All" tab.3Tap an application to be disabled.4Tap [Disable].5Read the notes and then tap [OK].･To enable again, tap [Enable].❖Information･When you disabled an application, some other applications linked to the disabled application may not be operated correctly. Enable the disabled application again to operate them correctly.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-148.png)
![147SettingsDeleting cache of the application1From the Settings screen (P.128), tap [Apps].2Tap an application to delete cache.3Tap [Clear cache].Deleting settings for activating the applicationYou can delete settings for activating the application and restore to the default.1From the Settings screen (P.128), tap [Apps].2Tap an application to delete its settings.3Tap [Clear defaults].Set preferred application in the terminal. You can also make settings for USB connection or Wi-Fi connection to a PC or other devices.*1 Data with copyright protection cannot displayed.Depending on usage environment, image or sound may be interrupted or stopped.Covering around the Wi-Fi antenna with your hand may affect the quality of communications.If you start Screen mirroring during Wi-Fi connection, Wi-Fi connection is disconnected and switched to packet communication (LTE/WCDMA/GSM).*2 Connection is available only with a device that supports HDCP.Xperia™About PlayStation CertifiedCheck trademarks of PlayStation.Battery lifeDisplay performance of the internal battery.Preferred apps settingsP. 1 4 8Screen mirroring*1Connect to a TV that supports Screen mirroring*2 to display the screen of the terminal.Smart ConnectSet to activate applications automatically when you connect the Stereo Headset with Microphone (Sample), a commercially available earphone or the AC adapter for charging. Also, set how applications operate when activating or deactivating.Start MirrorLink™Set to allow a device compatible with MirrorLink™ to operate the terminal using microUSB cable.Throw settingsPlay various contents in the terminal with other device.USB ConnectivityP. 1 7 2](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-149.png)
![148SettingsSetting preferred appsYou can set for applications (Home app, lock screen, phonebook app, application for play back videos or music) used in the terminal all at once or individually.1From the Settings screen (P.128), tap [Xperia™].2[Preferred apps settings]uTap any of [Set all to]/[Home screen]/[Lock screen]/[Contacts]/[Player(music and video)].3Tap [docomo]/[Xperia™].･"docomo" or "Xperia™" is set as a using application.❖Information･To set preferred apps all at once, from the Home screen, tap [Preferred apps settings]u[OK].You can set passwords for applications provided by docomo or to use the services supporting AUTO-GPS.PERSONALdocomo serviceApplication managerSet to check update for applications regularly.Wi-Fi settings for docomo appsSet to use docomo service when connecting Wi-Fi.docomo apps passwordSet a password for applications provided by docomo. docomo apps password is set "0000" by default.AUTO-GPSSet to use the services supporting AUTO-GPS.docomo location informationSet location information function for imadoco search, imadocokantan search and Keitai-Osagashi Service.docomo Wi-Fi Easy ConnectionSet the terminal for using docomo Wi-Fi or home Wi-Fi.データ量確認アプリ (Check data volume application)Set totaling cycle or starting/stopping measuring for データ量確認アプリ (Check data volume application).Open source licensesView open source licenses.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-150.png)
![150SettingsProtecting docomo mini UIM cardSome functions provided for convenient use of the terminal require the security code to use them. Besides the security code for locking the terminal, the network security code necessary for the network services etc. are available. Make use of the terminal using an appropriate security code according to the purpose.■ Notes on the security codes･Avoid using a number that is easy to guess, such as "birth date", "part of your phone number", "street address number or room number", "1111", and "1234". Make sure to make a note of the security code you set lest you should forget it.･Be very careful not to let others know your security code. If your security code is known by anyone else, DOCOMO shall have no liability for any loss due to any unauthorized use of it.･If you forget your security codes, you must bring your official identification (such as drivers license), the terminal, and docomo mini UIM card with you to the nearest docomo Shop. For details, contact the "General Inquiries" on the last page.･The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you subscribed other than docomo Shop, you must bring your official identification (such as drivers license), the docomo mini UIM card with you to the nearest docomo Shop or contact the "General Inquiries" on the last page.Network security codeThe network security code is a 4-digit number necessary for identification or using the docomo Network Services at reception of your request in docomo Shop or at docomo Information Center. It can be set any number at the subscription and also changed later by yourself.You can change your network security code to new one using a PC if you have "docomo ID"/"Password" for "My docomo", the General support site for PC.Alternatively, from the Home screen, tap [dmenu] and [お客様サポートへ (To Customer Support)]u[各種お申込・お手続き (Subscription/Procedure)] to change the security code yourself.* For information on "My docomo" and "お客様サポート (Customer Support)", see the previous page of the last page.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-152.png)
![151SettingsPIN codeYou can set security code which named PIN code to docomo mini UIM card. It is set "0000" at the subscription. They can be changed by yourself.PIN code is a 4- to 8-digit security number (code) that must be entered for user confirmation to prevent unauthorized use by a third party every time you insert the docomo mini UIM card into the terminal or when the terminal is powered on. Entering the PIN code enables making/receiving calls and terminal operation.･If you use a newly purchased terminal with docomo mini UIM card you have been using, use the PIN code set on the former terminal. If you did not change the setting, the code is "0000".･If you enter a wrong PIN code 3 times consecutively, the PIN code is locked and cannot be used anymore. In this case, unlock with "Personal Unblocking Key (PUK code)" (P.151).Personal Unblocking Key (PUK code)The PUK code is an 8-digit number for canceling the locked PIN code. The PUK code cannot be changed by yourself.･If you failed to enter PUK code 10 times consecutively, the docomo mini UIM card is locked. Please contact a docomo Shop.Enabling SIM card lockBy setting PIN (security code) and entering PIN code when powered on, you can protect the docomo mini UIM card from improper use.1From the Settings screen (P.128), tap [Security]u[Set up SIM card lock]u[Lock SIM card].2Enter PIN code and tap [OK].･"Lock SIM card" is marked.❖Information･You can unlock SIM card lock by the same operation.Entering the PIN code when powered on1On the PIN code entry screen, enter the PIN code.2Tap [OK].](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-153.png)
![152SettingsChanging the PIN code･You can change only when you activate the SIM card lock.1From the Settings screen (P.128), tap [Security]u[Set up SIM card lock]u[Change SIM PIN].2Enter the current PIN code and tap [OK].3Enter a new PIN code and tap [OK].4Enter a new PIN code again and tap [OK].Unlocking PIN lock1Tap [PUK code] field and enter PUK code.2Tap the [New PIN Code] field and enter a new PIN code and tap [OK].3Enter a new PIN code again and tap [OK].Screen lockYou can secure your data by requiring a screen unlock pattern every time the terminal is turned on or every time it is activated from sleep mode.There are 5 types of screen lock settings: "Swipe/Touch", "Face Unlock", "Pattern", "PIN" and "Password" (P.152).Setting screen unlock method1From the Settings screen (P.128), tap [Security]u[Screen lock].2Tap [Swipe/Touch]/[Face Unlock]/[Pattern]/[PIN]/[Password].･When you tap [Face Unlock], follow the onscreen instructions to set face authentication. For unlocking when the Face Unlock cannot be unlocked, "Pattern" or "PIN" is required to select to set.･When you tap [Pattern], follow the onscreen instructions to enter unlock pattern.Set security question and answer in case you forget the pattern.･When you tap [PIN], follow the onscreen instructions to enter 4 - 16 digit numbers. This "PIN" code is different from a PIN code to be set to docomo mini UIM card (P.151).･When you tap [Password], follow the onscreen instructions to enter 4 - 16 digit characters including alphabets.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-154.png)
![153SettingsChanging screen unlock method1From the Settings screen (P.128), tap [Security]u[Screen lock].2Enter the current unlock pattern/PIN/password.3Select a new unlock method.･For details, see Step 2 in "Setting screen unlock method" (P.152).Locking the screenOnce screen unlock method (P.152) is set, the screen is locked when the sleep mode is set or P is pressed.Unlocking the screen lock1Press P to turn the backlight on.2Enter unlock screen method.･Enter the set unlock method (Flick or Tap/Face Unlock/Pattern/PIN/Password).If you forget how to unlock■ If you set "Pattern""Incorrect pattern" appears when you enter incorrect unlock pattern 5 times consecutively.･Tap [Next], and answer the security question that you set for the unlock pattern setting, then tap [Unlock] to unlock the screen lock.･If you set Google account, on the "Incorrect pattern" screen, tap [Next] to display "Answer question" and "Enter Google account details".- Mark "Answer question" and tap [Next], and answer the security question, then tap [Unlock] to unlock the screen lock.- Mark "Enter Google account details", tap [Next], and enter Google account and password, then tap [Sign in] to unlock the screen lock.･When setting new unlock pattern after unlocking screen lock, "Screen unlocked" appears. Tap [Yes] to reset unlock pattern.❖Information･Tap [Try again] to retry entering pattern in 30 seconds.･When you tap [Try again]u[Forgot pattern?], the screen after tapping [Next] is displayed.･If you set multiple Google accounts, enter one of those accounts and password to unlock the screen.■ If you set "PIN" or "Password"Please contact a docomo Shop.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-155.png)
![154SettingsCanceling screen lockYou can cancel screen lock pattern after you set.1From the Settings screen (P.128), tap [Security]u[Screen lock].2Enter the current unlock pattern/PIN/password.3Tap [None].Permitting downloading unknown source's application･Before you can download unknown source's applications, set the terminal to enable downloading.Applications you download may be of unknown origin. To protect your terminal and personal data, only download applications from trusted sources such as the Google Play etc.1From the Settings screen (P.128), tap [Security].2Tap [Unknown sources].3Read the notes and then tap [OK].･"Unknown sources" is marked.You can select language and input method.Changing phone language1From the Settings screen (P.128), tap [Language & input]u[Language].2Select a language and tap [OK].･When you select Japanese, "OK" is displayed, but its display varies by the language you selected.Language & inputLanguageP. 1 5 4Spell checkerSet spell checker.Personal dictionaryRegister words.DefaultSet input method.Google voice typingP. 6 5Moji-HenshuXperia™ Chinese keyboardXperia™ Japanese keyboardXperia™ keyboardVoice SearchP. 1 5 5Text-to-speech outputP. 1 5 5Pointer speedSet pointer speed of mouse etc.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-156.png)
![156SettingsResetting the terminalResetting the terminal deletes all data, including downloaded applications and accounts, and resets the terminal back to the initial (default) state. Make sure to back up important data you have on the terminal before you reset the terminal.For the initial settings, see "Initial settings" (P.42).1From the Settings screen (P.128), tap [Backup & reset]u[Factory data reset]u[Reset phone].･Mark "Erase internal storage" to delete all contents (music, photos, videos, etc.) on the internal storage.･Enter your screen unlock method as required.2Tap [Erase everything].･The terminal restarts automatically.Display Setup guide and make the terminal settings.･For details, see "Initial settings" (P.42).You can manage (add or delete) online service accounts or synchronize contacts, messages, etc. saved in online services with the terminal.Setting Google accountYou can create a Google account on your terminal and use Google services such as Gmail, Google Talk, Google Calendar, Google Play, etc.You can set multiple Google accounts on the terminal.1From the Settings screen (P.128), tap [Add account]u[Google].2Follow the registration wizard, set a Google account.･If you have no Google account, create an account.･If you have already the Google account, sign in.Setup guideAccountSetting an account](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-158.png)
![158Settings1From the Settings screen (P.128), tap [Add account]u[Facebook].･If you already have a Facebook account and set account from Phonebook etc. of the terminal, you need not add a new account.2Enter your sign in information.･If you have no Facebook account, register an account.･If you have Facebook account, sign in.■ Setting Xperia™ with FacebookSet Facebook account to display in the status bar. Drag the status bar downwards and set "Xperia™ with Facebook" to synchronize functions of applications in the terminal.1Drag the status bar downwards and tap [Xperia™ with Facebook].2Read the notes and then tap [Accept]u[Done].❖Information･Alternatively, from the Settings screen (P.128), tap [Add account]u[Xperia™ with Facebook].･Tap "Xperia™ with Facebook" account or set account to set the following.Application control settingsSet apps connected to Facebook with the terminal. If you mark functions, applications in the terminal synchronize with Facebook.Sync CalendarSynchronize events such as Friends' birthdays, etc., stored in Facebook with Calendar in the terminal.Sync ContactsSynchronize profile of Friends stored in Facebook with the phonebook stored in the terminal.Sync Friends' musicSynchronize music that Friends specified "Like" in Facebook with WALKMAN in the terminal.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-160.png)
![159SettingsSetting other accountYou can set docomo account, Email, Corporate (Exchange ActiveSync), etc. other than Google account (P.156) or Facebook account (P.157).1From the Settings screen (P.128), tap [Add account].2Tap an account type.･After this step, follow the onscreen instructions.❖Information･Use docomo account when you use "ドコモバックアップ (docomo backup)" app (P.238) provided by NTT DOCOMO. docomo account is set by default.Removing account1From the Settings screen (P.128), select an account type and then select an account you want to delete.2Tap , then tap [Remove account]u[Remove account].❖Information･A Google account registered by marking "Keep this phone backed up with my Google Account" on the "Backup and restore" screen is registered as a backup account. When a backup account is removed, caution appears on the status bar.･docomo account cannot be deleted.Setting Auto-syncSynchronize information of online service with the terminal. You can display and edit information on the terminal or a PC.･You need to set your online service account (Google account, Facebook account, etc.) in the terminal to synchronize in advance.1From the Settings screen (P.128), tap [Data usage].2Tap and [Auto-sync data], then read the notes and then tap [OK].･"Auto-sync data" is marked.❖Information･To change online service items for synchronizing, from the Settings screen (P.128), select an account type. Select an account to change and mark items to be synchronized.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-161.png)
![160Settings❖Note･Setting Auto-sync permits to synchronize data of Gmail, calendar, contacts, etc. in the Google account and profile information published by "Friends" etc. set in the online service automatically. These communications may cause you to pay packet communications charges.･When Auto-sync is not set, synchronize manually. From the Settings screen (P.128), select an account type. Select an account and tap items to be synchronized.Canceling synchronization1Tap during a synchronization.2Tap [Cancel sync].You can change the date and time in the terminal.･To set date/time or time zone manually, unmark "Automatic date & time" or "Automatic time zone" to disable network-provided time/time zone in advance.❖Information･Correction of the time differences may not be performed correctly depending on the overseas network operator. In that case, set time zone manually (P.161).SYSTEMDate & timeAutomatic date & timeAdjust date and time automatically by using network-provided information.Automatic time zoneAdjust time zone automatically by using network-provided information.Set dateP. 1 6 1Set timeP. 1 6 1Select time zoneP. 1 6 1Use 24-hour formatP. 1 6 1Choose date formatP. 1 6 1](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-162.png)
![161SettingsSetting the date1From the Settings screen (P.128), tap [Date & time]u[Set date].2Drag number to adjust date.3Tap [Done].Setting the time1From the Settings screen (P.128), tap [Date & time]u[Set time].2Drag number to adjust hour and minute.･When you unmark "Use 24-hour format", drag "am" or "pm" to switch AM/PM.3Tap [Done].Setting the time zone1From the Settings screen (P.128), tap [Date & time]u[Select time zone].2Select time zone you want to set.Setting the time format1From the Settings screen (P.128), tap [Date & time].2Mark/unmark "Use 24-hour format".･Mark the checkbox to shift to 24-hour format, and unmark to shift to 12-hour format.Setting the date format1From the Settings screen (P.128), tap [Date & time]u[Choose date format].2Select date format you want to set.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-163.png)
![162SettingsYou can set user support service which sounds or vibrates according to users operation and call end operation.Put the terminal into debug mode when connecting USB or set the screen backlight to ON while charging.Keeping the screen backlight ON while charging1From the Settings screen (P.128), tap [Developer options].2Tap in Developer options or drag it right.3Read the notes and then tap [OK].4Mark "Stay awake".AccessibilityTalkBackSet user support service (TalkBack).Large textEnlarge text size.Power button ends callSet to end a call by pressing P.Auto-rotate screenP. 4 8Speak passwordsOutput password by voice sound.Text-to-speech outputP. 1 5 5Touch & hold delaySet response time for operation of touching and holding the screen.Enhance web accessibilitySet whether to install script from Google.Developer options](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-164.png)
![165File management･If the set alarm time comes during infrared communication, data exchange is interrupted and the alarm starts to sound.･ is displayed in the status bar during infrared communication.･You can send and receive Phonebook entries, My profile, name card, sp-mode mail, Schedule & memo, still images (.jpeg, .png, .gif, .bmp), videos (.mp4, .3gp) and ToruCa. It may take a time to exchange data depending on the data amount or device of other party.･Some data, such as data with copyright protection, etc., cannot be played back on other devices.･Received data cannot be played back or saved depending on the sender's device, data type or data amount.･The received data is saved on the internal storage.Use the "Infrared" app to send all data of "Phonebook", "sp-mode mail" or "Schedule&Memo". You can also send data one by one or send a still image or a video using the sharing menu of applications such as "docomo phonebook", "Album".■ Sending with "Infrared" app1From the Home screen, tap , then tap [Infrared].2Tap [Send all].3Tap [Phonebook]/[sp-mode mail]/[Schedule&Memo].･When you tap [sp-mode mail], select any of "Inbox"/"Sent"/"Unsent".4Tap [Start].5Enter docomo apps password and tap [OK].6Enter the same authentication password as that of the recipient and tap [OK]u[OK]u[OK].■ Sending with sharing menu of function1Select "Infrared" from the sharing menu of each application.Sending data via infrared communication](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-167.png)
![166File management❖Information･My profile (excluding name card) can be sent using infrared communication widget. From the Home screen, tap of (infrared communication widget) and follow the onscreen instructions.･For instructions on sending from the "docomo phonebook" app, see "Sending phonebook entries via infrared communication" (P.106).･For instructions on sending from "Album" app, see "Sharing image files" (P.221).･You cannot send two or more items of My profile, name card, still image, video or ToruCa at a time.■ Receiving 1 item1From the Home screen, tap , then tap [Infrared].2Tap [Receive]u[OK].3When receiving is complete, tap [OK]u[OK].■ Receiving all items1From the Home screen, tap , then tap [Infrared].2Tap [Receive all].3Enter docomo apps password and tap [OK].4Enter the same authentication password as that of the sender and tap [OK]u[OK]u[OK]u[OK].Receiving data via infrared communication](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-168.png)
![168File management･Within 10 meters, turn off either the Bluetooth device or the wireless LAN device.* The terminal does not communicate wirelessly with all types of Bluetooth devices. Bluetooth DUN is not supported.1From the Home screen, tap , then tap [Settings].2Tap in Bluetooth or drag it right.･ appears on the status bar and Bluetooth function turns on.3Tap [Bluetooth].4Tap [Xperia A].･The terminal becomes detectable by other Bluetooth devices for 2 minutes.❖Information･Alternatively, drag the status bar downwards and tap [Bluetooth] to set Bluetooth function to on/off.You can name the terminal. The name appears on Bluetooth devices when you use the Bluetooth function.1Make sure that the Bluetooth function is on.2From the Home screen, tap and tap [Settings]u[Bluetooth].3Tap and tap [Rename phone].4Enter a name and tap [Rename].To connect the terminal and Bluetooth device, make pair setting for Bluetooth device. With paired and connected, you can make/receive a call with handsfree headset etc., or send/receive data such as image between the terminal and the Bluetooth device.･Once you have made pair setting for the terminal and a Bluetooth device, the setting is saved.Making the terminal detectable with the Bluetooth function onEntering the terminal nameMaking pair setting for the terminal and Bluetooth device](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-170.png)
![169File management･For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device.･Once you made pair settings by entering passcode (PIN), you do not need to enter the passcode (PIN) when connecting with the paired Bluetooth device next time.･For Bluetooth profiles compatible with the terminal, see "Main specification" (P.266).1Make sure that the Bluetooth function is on.2From the Home screen, tap and tap [Settings]u[Bluetooth].3Tap [Search for devices].･A list of detected Bluetooth devices appears.4Tap a Bluetooth device name to pair with the terminal.5Check a passkey on the "Bluetooth pairing request" screen, then tap [Pair].･You can use the Bluetooth device that has been paired.･Some Bluetooth devices make connections continuously after making pair setting.･Authentication passcode (PIN) may be required on the "Bluetooth pairing request" screen.❖Information･Make sure that the Bluetooth function and Bluetooth detection function of the target device are on.･When you make pair setting with the Bluetooth device supporting Secure Simple Pairing (SSP) function, a passkey appears on the screen. Check the passkey and make the pair setting.1Make sure that the Bluetooth function is on.2From the Home screen, tap and tap [Settings]u[Bluetooth].3Tap [Search for devices].･A list of detected Bluetooth devices appears.･Pair Bluetooth devices as required.Connecting the terminal with Bluetooth device](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-171.png)
![170File management4Tap the name of Bluetooth device you want to connect.･While connecting to a device, appears in the status bar and the connection status appears under the device name.❖Information･Tap on the name of connected Bluetooth device to check the status of that Bluetooth device or change the settings.1From the Home screen, tap and tap [Settings]u[Bluetooth].2Tap the connected Bluetooth device name.3Tap [OK].･To reconnect, tap the device name.1From the Home screen, tap and tap [Settings]u[Bluetooth].2Tap in a Bluetooth device name to unpair and tap [Unpair].･Connection disconnects and the pair setting is canceled.･Turn the Bluetooth function on before pairing with the other party's Bluetooth device.Receiving data via Bluetooth function1Send data from a Bluetooth device.･ appears on the status bar.2Drag the status bar downwards and tap [Bluetooth share: Incoming file]u[Accept].･When receiving is complete, a message indicating that the data is received appears.Deactivating the connection of a Bluetooth deviceCanceling the pair setting of a Bluetooth deviceSending/receiving data using Bluetooth function](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-172.png)
![172File managementConnecting the terminal and a PC using a microUSB cable1Connect the terminal to a PC using a microUSB cable (P.39).･When you connect microUSB cable for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed.･When "PC Companion software" screen appears on the terminal, tap [Skip].■Media transfer mode (MTP)"Internal storage & SD card" appears in the status bar of the terminal. The terminal is displayed on the PC screen as a portable device.You can access the internal storage and a microSD card in the terminal.■Mass storage mode (MSC)"SD card connected" appears in the status bar of the terminal. The terminal is displayed on the PC screen as a removable disc.You can access the microSD card.❖Information･Screen that appears when connecting to a PC may vary depending on the operating system (OS) of a PC.･From the Home screen, tap and tap [Settings]u[Xperia™]u [USB Connectivity] to check connection mode and change the settings as follows.･When you connect the terminal to a PC switching USB connection mode to "Mass storage mode (MSC)", you cannot access the microSD card on the terminal. Some functions using microSD card for the applications such as "Camera" or "Album" may not be available.･When the terminal is connected to a PC, charging starts automatically. For details, see "Charging with a PC" (P.39).Install PC CompanionDisplay PC Companion installation wizard when connected to a PC (P.263).USB connection modeSwitch USB connection mode to "Media transfer mode (MTP)"/"Mass storage mode (MSC)" when connecting to a PC.TRUSTED DEVICESConnect the terminal and a host device in a pair via Wi-Fi network (P.174).](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-174.png)
![173File management･Tap [Install] on the "PC Companion software" screen to install PC Companion. You can update software of the terminal by connecting to a PC (P.263). Also, you can use the following applications on a PC for managing media files, creating backup files, etc. with a PC connected. For details, check on the PC Companion screen after installation.Disconnecting the microUSB cable safely･Do not disconnect the microUSB cable during data transferring. Data may be damaged.■ Media transfer mode (MTP)1Confirm that it is not transferring data, disconnect the microUSB cable.■ Mass storage mode (MSC)1Drag the status bar downwards.2Tap [SD card connected].･"SD card disconnected" appears in the status bar.3Disconnect the microUSB cable.Support ZoneUpdate software of the terminal by connecting to a PC (P.263).Contacts SetupCopy the contacts data of the mobile phone previously used to the terminal.Media GoP.174Sync ZoneSynchronize phonebook or calendar between a PC or Google and the terminal.Back up & RestoreBack up the terminal data or move the data to another terminal.File ManagerCheck file type, update time, location, etc. on the terminal.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-175.png)
![174File managementThe Media Go computer application helps you transfer and manage media content in the terminal and PC.With Media Go, you can load music from a CD to a PC and transfer to the terminal.･You can install Media Go from PC Companion. Activate PC Companion installed in a PC and install Media Go with "Sony PC Companion" screen. For information on how to install PC Companion, see "When PC Companion is not installed on your PC" (P.263).❖Information･You can also download Media Go from the following website.http://mediago.sony.com/enu/features ･To learn more about how to use the Media Go application, see the help section of the Media Go application.If the terminal and a PC* are connected in a pair on a Wi-Fi network, automatic connection/disconnection of internal storage of the terminal with a PC is enabled when the terminal user comes in and out of the Wi-Fi area. You can easily access to files in the internal storage of the terminal from a connected PC.* Use Microsoft Windows 7 or Microsoft Windows 8 to make a pair setting. Pair setting cannot be made under Microsoft Windows XP, Microsoft Windows Vista or other OS.1Connect a PC you want to set in a pair to a Wi-Fi network.2Connect the terminal to a Wi-Fi network (P.129).3Connect the terminal to a PC using a microUSB cable.･When "PC Companion software" screen appears on the terminal, tap [Skip].Using Media Go Connecting the terminal to a PC on a Wi-Fi network](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-176.png)
![175File management4Make sure that the terminal is displayed as a portable device on "Computer" the screen of the PC.5Right click the portable device icon, then click "ネットワーク構成 (network composition)".6Click "次へ (Next)".7On the pop-up screen of the terminal, tap [Pair].8On the "ポータブルデバイスのネットワーク構成 (network composition of the portable device)" screen of the PC, click " 完了 (Done)".9Disconnect the microUSB cable.10From the Home screen, tap and tap [Settings]u[Xperia™]u[USB Connectivity]u"Host name" (PC name) in the "TRUSTED DEVICES" field.11Tap [Connect].･The terminal and the PC are connected in "Media transfer mode (MTP)" on a Wi-Fi network, and you can exchange data files.❖Information･From the Home screen, tap and tap [Settings]u[Xperia™]u[USB Connectivity] to display "Host name" (PC name) in the "TRUSTED DEVICES" field. To cancel connection setting, tap the host name and [Forget]. Until "Forget" is tapped, the connection setting retains even if you connect/disconnect repeatedly by coming in and out of a Wi-Fi area.･If the privacy separator function for Wi-Fi network (access point) is enabled, pair setting cannot be made.Using Wi-Fi function, you can share media files with other client (DLNA : Digital Living Network Alliance) devices.Set Wi-Fi connection (P.129) with another client device in advance.Sharing a file with DLNA device](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-177.png)
![176File managementSetting Media server1From the Home screen, tap , then tap [Settings]u[More...].2Tap [Media server settings].･Media server settings screen appears. You can set the following items.❖Information･On the Media server settings screen, tap and [Wi-Fi settings] to set Wi-Fi connection.Playing media files in the DLNA device with the terminalYou can share media files on the terminal and DLNA device using media server function.･Connect a DLNA device and the terminal via the same Wi-Fi network, and set the permission of access from the terminal for the device in advance.1On the Media server settings screen, tap of Share content or drag it right.･"Media server turned on" appears in the status bar.2Tap y.･A home screen appears.3From the Home screen, tap , then tap [Album]/[Movies].4Tap [My albums]/[Devices].5Select a device name to connect, and select a folder.6Tap a media file to play it.SO-04EChange server nameRename the terminal (server) displayed on a client device.Share contentSet to connect from a client device to the terminal via Wi-Fi.PENDING DEVICESManage client devices waiting access permissions.REGISTERED DEVICESManage client device registered to the terminal.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-178.png)
![177File managementPlaying a media file in the terminal with a DLNA deviceYou can play a media file in the terminal with a DLNA device using Throw function.･Connect a DLNA device and the terminal via the same Wi-Fi network in advance.･Setting a permission of access from the terminal in advance may be required on a DLNA device.1From the Home screen, tap , then tap [Album]/[Movies].2Tap a tile you want to play.3Tap and [ Throw].･A device list appears.4Tap a device on the device list.･The file is played by a DLNA device.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-179.png)
![178ApplicationsApplicationsIn dmenu, you can easily access sites recommended by DOCOMO or convenient applications.1From the Home screen, tap [dmenu].･Browser activates to display "dmenu".❖Information･To use dmenu, Internet connection by packet communication (LTE/3G/GPRS) or Wi-Fi is required.･For connecting dmenu and downloading applications introduced in dmenu, packet communication charge is applied separately. Some applications automatically perform packet communications.･Applications introduced by dmenu may include charged ones.You can obtain useful and interesting contents which meet your needs at dmarket.1From the Home screen, tap [dmarket].･When you activate for the first time, "dマーケットソフトウェア使用許諾契約書 (License Agreement)" appears. Mark "Agree" and tap [Start use].❖Information･For details on dmarket, refer to NTT DOCOMO website.dmenuOpening dmenudmarketOpening dmarket](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-180.png)
![179ApplicationsWith Google Play, you can directly access useful applications or fun games which you can download and install on the terminal. And you can send feedback and comments about an application, or report objectionable application or incompatible application with the terminal as an inappropriate content.･To use Google Play, you need to set a Google account (P.156).･Some applications and games are free of charge, and the others are paid. On the applications list of Google Play, distinction between free and paid is clearly specified. For details on purchasing, returning and refunding of paid applications, see "Help" (P.180).1From the Home screen, tap [Play Store].･When License agreement screen appears, follow the onscreen instructions.2Search application and tap application you want to install.･Check the displayed contents carefully and follow the onscreen instructions.･Be careful especially about applications which access many functions or large amount of data. If you perform download operation, you are responsible for the consequences of using this application on the terminal.❖Information･Be sure to check the security of application, then install it at your own risk. The terminal may be infected with a virus and the data may be damaged.･NTT DOCOMO is not liable for malfunctions, if any, caused by the application you installed. In such case, the repair is charged even during the warranty period.･NTT DOCOMO is not liable for any disadvantage brought to you or any third party due to an application you installed.･Some applications automatically perform packet communications. Packet communication is kept active unless you disconnect it or the time-out is occurred. To disconnect packet communications manually, drag the status bar downwards and tap [Mobile data]. When packet communication is disconnected, appears.･Some applications may be updated automatically.Play StoreInstalling applications](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-181.png)
![180Applications1From the Home screen, tap [Play Store].2Tap and [My Apps].3Tap the applications you want to delete, then tap [Uninstall]u[OK].･When you uninstall charged applications, a screen for refund may appear. For details, refer to "Help" (P.180).When you need help or have any questions about Google Play, display the Google Play screen, then tap and tap [Help] to open Google Play help page.This function allows you to use "おサイフケータイ対応サービス (Osaifu-Keitai compatible service)" by which you can pay money or use coupon, etc. or "かざしてリンク対応サービス (Kazashite-Link compatible service)" by which you can access information by holding the terminal over a home electric appliances or smart poster.Electronic money or point values can be saved in the IC card or the docomo mini UIM card.You can check credit, payment or points of electronic money by using the network. In addition, you can lock your Osaifu-Keitai to provide against loss or theft, and you can use Osaifu-Keitai with safe.For details on Osaifu-Keitai, refer to "ご利用ガイドブック (spモード編) (Mobile Phone User's Guide [sp-mode]) (in Japanese only)".Deleting applicationHelpOsaifu-Keitai](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-182.png)
![181ApplicationsiC transfer serviceThe iC transfer service is a service which helps you transfer all data in the IC card for Osaifu-Keitai to your new Osaifu-Keitai when you change Osaifu-Keitai for changing of the model or repair. Data in the docomo mini UIM card remains the same after using the iC transfer service.Visit a sales outlet such as docomo Shop to use the iC transfer service.For details on iC transfer service, refer to "ご利用ガイドブック (spモード編) (Mobile Phone User's Guide [sp-mode]) (in Japanese only)".Precautions on using the Osaifu-Keitai compatible terminal･The data in the IC card*1 or the docomo mini UIM card*2 may be lost or modified because of the malfunction of the terminal (When we take your terminal for repair etc., as we cannot take it with data remained, you are required to erase the data by yourself ). For support such as reissuance, restoration, temporary preservation or transfer of data, contact Osaifu-Keitai compatible service providers. For important data, be sure to use a service with backup service.･If the data in the IC card or the docomo mini UIM card is lost, modified or damaged by any means related to Osaifu-Keitai compatible service such as malfunction or model change, DOCOMO assumes no responsibility for the loss of data.･If the terminal is stolen or misplaced, immediately contact Osaifu-Keitai compatible service provider for an advice.･If you use a docomo mini UIM card (red), you cannot use some Osaifu-Keitai compatible services such as international use. Bring it to a docomo Shop to replace from February, 2013 (scheduled).You can use "Osaifu-Keitai compatible services" and "Kazashite-Link compatible service", which can be saved in the IC card.*1 Data saved in the IC card built in the Osaifu-Keitai compatible terminal (including electronic money or point values)*2 Data saved in the docomo mini UIM card (including electronic money or point values, and excluding phonebook data and SMS data)](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-183.png)
![182Applications1From the Home screen, tap then tap [Osaifu-Keitai].2Select a service you want to use from a service list.･Download an application compatible with service site or service.･You can exchange data with an IC card reader only by holding mark over the card reader.❖Information･If you do not make the initial setting for Osaifu-Keitai in the initial setting for DOCOMO services (P.42), the initial setting screen appears in Step 2. Follow the onscreen instructions.･You can scan and write data to or from an IC card reader without activating Osaifu-Keitai compatible application.･The function is available even if the terminal is off, but it may not be available when the terminal is off for a long while or battery is low.･You can use Osaifu-Keitai compatible service even when the PIN code cannot be unlocked or PIN locked.･Note that when you do not subscribe sp-mode, some functions of Osaifu-Keitai compatible service may not be available.1From the Home screen, tap , then tap [Settings]u[More...].2[NFC/Osaifu-Keitai settings]u[Reader/Writer, P2P]u[OK].･"Reader/Writer, P2P" and "Android Beam" are marked.･NFC Reader/Writer, P2P function is enabled, and appears in the status bar.3Hold the mark over a device with the NFC module or a smart poster.･When software license agreement appears, tap [Agree] and follow the onscreen instructions.Using "おサイフケータイ対応サービス (Osaifu-Keitai compatible service)"Using "かざしてリンク対応サービス (Kazashite-Link compatible service)"](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-184.png)
![183ApplicationsOne-touch function is an original function developed by Sony based on NFC technology. You can send/receive data to/from a device with NFC such as a mobile phone. If you use the one-touch function with a Sony product with NFC, simple operations allow you to send or receive images, music, photos or videos taken with the terminal.･Enable NFC Reader/Writer, P2P function in advance (P.183).･Place 2 mobile phones in parallel position and point marks to each other. Do not move them until sending/receiving is complete.･Operations to send/receive and available data to send/receive depend on the compatible applications. Follow the onscreen instructions.･Even if marks are pointed to each other, sending/receiving may be failed. If failed, perform operations of sending/receiving again.･When pointing marks to each other slowly, sending/receiving may be failed.･The terminal does not communicate with all NFC devices.Enabling NFC Reader/Writer, P2P function1From the Home screen, tap , then tap [Settings]u[More...].2[NFC/Osaifu-Keitai settings]u[Reader/Writer, P2P]u[OK].･"Reader/Writer, P2P" and "Android Beam" are marked.･NFC Reader/Writer, P2P function is enabled, and appears in the status bar.❖Information･Alternatively, from the Home screen, use "NFC Quick Launch" to enable/disable NFC Reader/Writer, P2P function.Sending/Receiving data by one-touch function](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-185.png)
![184ApplicationsSending data1Make sure that the NFC Reader/Writer, P2P function is enabled.2Display data to send on the screen.3Face the marks each other with the receiving terminal.･The displayed screen becomes small, and "Touch to beam" appears.･When software license agreement appears, tap [Agree] and follow the onscreen instructions.4Tap the screen that has become small.Receiving data1Make sure that the NFC Reader/Writer, P2P function is enabled.2Face the marks each other with the sending terminal.･When data is received, an application that supports the data opens. Follow the onscreen instructions.･When holding mark over the other device, make sure not to hit the terminal strongly.･Hold the mark over parallel to the center of the other device.･If mark is not recognized even when holding over the device, try lifting the terminal slightly, or moving the terminal back, forth and around.･If there are metal objects between mark and the other device, scanning may be failed. And note that putting the terminal in a case or cover may affect communication performance.Notes on holding the mark over the other device such as a reader or device with the NFC module](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-186.png)
![185ApplicationsUse "NFC/Osaifu-Keitai lock" settings to restrict the use of Osaifu-Keitai function and related services.･NFC/Osaifu-Keitai lock is different from screen lock for the terminal, SIM card lock.1From the Home screen, tap , then tap [Settings]u[More...].2Tap [NFC/Osaifu-Keitai settings]u[NFC/Osaifu-Keitai lock].3Enter a password, then tap [Next].･When using "NFC/Osaifu-Keitai lock" for the first time, enter a password to set. Set security question and answer in case you forget the pattern following the onscreen instructions.･Osaifu-Keitai function is locked, and or is displayed in the status bar.❖Information･Note that you cannot cancel "NFC/Osaifu-Keitai lock", if the battery runs out while "NFC/Osaifu-Keitai lock" is set. Be careful about remaining battery level. If you cancel "NFC/Osaifu-Keitai lock", charge the terminal before canceling.･You need to unlock to use Osaifu-Keitai menu while "NFC/Osaifu-Keitai lock" is set.･"NFC/Osaifu-Keitai lock" password is not be deleted even if you reset the terminal.･If you forget the password for "NFC/Osaifu-Keitai lock", tap in the "NFC/Osaifu-Keitai settings" screen and tap [Forget password?], then answer the secret question that you set when setting the password. Note that you cannot cancel "NFC/Osaifu-Keitai lock" if you forget both the password and secret question.･When unlocking "NFC/Osaifu-Keitai lock", insert the same docomo mini UIM card as the one inserted when "NFC/Osaifu-Keitai lock" was set, then unlock.Locking Osaifu-Keitai function](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-187.png)
![186Applications"iD" is a convenient electronic money by credit clearance scheme. You can enjoy shopping simply and conveniently only by holding Osaifu-Keitai with credit information set or the iD-compatible card over the IC card reader in stores. Because up to 2 types of credit information can be registered in Osaifu-Keitai, you can use them according to the benefits, etc. It also supports cashing, depending on the card issuer.･To use iD with Osaifu-Keitai, subscribing to a card issuer that supports iD, settings for iD application are required.･The charges required for iD service (including the annual charge) vary by card issuer.･For using the application, a packet communication charge is applied.･A packet communication fee for oversea use differs from the one in Japan.･For details on iD, refer to iD website.http://id-credit.com/ (In Japanese only)ToruCa is an electronic card that can be obtained to mobile phones. It can be obtained from the IC card reader or site as store information, coupon ticket, etc. Obtained ToruCa is saved to the "ToruCa" app. Use the "ToruCa" app to display, search or update.For details on ToruCa, refer to "ご利用ガイドブック (spモード編) (Mobile Phone User's Guide [sp-mode]) (in Japanese only)".❖Information･For obtaining, displaying or updating ToruCa, a packet communication charge may be applied.･Some ToruCa provided to i-mode terminal may not be obtained/displayed/updated.･Depending on the settings of IP (Information Provider), the following functions may not be available.- Obtaining/Updating from the IC card reader, sharing ToruCa, moving to microSD card, copying/displaying map･Some ToruCa which can be displayed in a map from ToruCa (details) may not be displayed in a map from the ToruCa list depending on the IP settings.･While "NFC/Osaifu-Keitai lock" is set, you cannot obtain ToruCa with an IC card reader.･If you mark 重複チェック (Duplication check), obtaining the same ToruCa redundantly is not available. To obtain the same ToruCa redundantly, unmark 重複チェック (Duplication check).･When you send ToruCa attaching to email, it is sent in the condition before obtaining ToruCa (details).iDアプリ (iD application) ToruCa](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-188.png)
![189Applications❖Information･Connect the 1Seg antenna cable SO01 to the terminal and connect the Stereo Headset with Microphone to emit sound of 1Seg.Make channel setting when you use 1Seg for the first time. After channel setting is done, 1Seg programs can be watched.1From the Home screen, tap and tap [1Seg].2Tap [OK].･1Seg menu appears.3Tap [Setting]u[Channel setting].4Tap [Current area].･Available channels are searched.5Enter a title name and tap [OK].･To return the 1Seg menu, tap x.❖Information･Alternatively, tap [Select area] in Step 4 then select area to make channel setting.1From the Home screen, tap and tap [1Seg].2Tap [ Watch].･1Seg watching screen appears. Tap the image to temporarily view program information such as program name.■ 1Seg watching screenaProgram informationbImageInitial settings for 1SegWatching 1Seg program1Seg watching screen(with data broadcasting)ijhdabcfeg1Seg watching screen (full screen)jabhedfg](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-191.png)
![190ApplicationscData broadcasting : Display data broadcasting content.dBroadcasting stationeRemote controller : Display numeric keys to switch channels and keys for searching stations.fProgram guide : Display program guide.gView optional menuhSubtitleiRemote controller for data broadcasting : Display operation keys for data broadcasting such as Move focus, Select focus, Back, Show numeric keys, etc.j1Seg status bar : Display icons for off timer, channel, reception level, subtitle, etc.❖Information･While watching 1Seg, press m to adjust volume.･You can watch 1Seg turning the terminal sideways. To set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation, drag the status bar downwards and tap [Auto rotate].･For data broadcasting, screen display supports portrait only.･Flick the 1Seg watching screen left and right to select the previous or next channel you are currently watching.･You cannot exit 1Seg even if you tap y to return to the Home screen. If 1Seg remains activated, the battery may be consumed quickly. To exit 1Seg, tap x while watching 1Seg.･It may take a time to acquire image data or broadcasted data when you activate 1Seg or change channels due to characteristic of digital broadcasting.･According to the airwave condition, image or sound may be interrupted or stopped.･If the terminal receives a call while watching 1Seg, 1Seg is interrupted and resumes after the call ends.Watching data broadcastingFor data broadcasting, you can view various information by following the onscreen instructions.❖Information･To watch data broadcasting, call charge or packet communication charge is not required. If you use additional services of data broadcasting, etc. via packet communication, packet communication fees are charged.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-192.png)
![191ApplicationsYou can set 1Seg watching screen, data broadcasting and initialize.Using optional menuYou can record 1Seg, switch caption display, etc.1On the 1Seg watching screen (P.189), tap .Setting 1Seg viewing1On the 1Seg watching screen (P.189), tap then tap [Viewing setting].Setting 1SegStart recordingStart/Stop recording (P.194)."Stop recording" is displayed during recording.Caption settingSwitch caption display to on or off.Viewing settingSet 1Seg viewing (P.191).TVlinkDisplay a TV link list screen (P.193).1Seg menuGo back to the 1Seg menu.Channel infoDisplay information for available channels.Program infoDisplay information for received programs.Channel listStored channels and areas (broadcasting service areas) are listed.Add to channel listAdd a channel from 1Seg watching screen.ReservationReserve viewing or recording or display reservation results.Switch displaySwitch display between Video+DataBC and Data broadcasting.Off timerMake a timer setting to end 1Seg watching.Main/sub soundSet main/sub sound.Sound switchSet to switch sound.Sound effect settingSwitch sound effect of data broadcasting between on and off.Back to data BCDisplay data broadcasting.Tune serviceYou can select a sub-channel when several programs (services) are broadcasted for separated sub-channels in a channel.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-193.png)
![192ApplicationsSaving channels in the current locationAvailable channels vary depending on the area (broadcasting service area) you are using in.1From the Home screen, tap and tap [1Seg].2Tap [Setting]u[Channel setting].3Tap [Current area].･Available channels are searched.4Enter a title name and tap [OK].❖Information･Alternatively, tap [Select area] in Step 3 then select area to save channels.Changing channel list1From the Home screen, tap and tap [1Seg].2Tap [Setting]u[Channel list] to select a registered channel list.･You can change channels to watch.❖Information･On the channel list screen, touch and hold saved channel list to display channel information, set channels, edit titles, etc.Changing numbers for TV remoteChange TV remote number assigned to each broadcasting station. Each broadcasting station can be called up via the corresponding TV remote number.1From the Home screen, tap and tap [1Seg].2Tap [Setting]u[Channel list] and tap a channel list to change.3Touch and hold channel information and tap [Remote control No.].4Tap a broadcasting station to change the remote control number.5Tap a remote control number to set the selected broadcasting station for.･If you select a remote control number set for another broadcasting station, the previously set broadcasting station is switched to the broadcasting station that is set in Step 4.6Tap x and [YES].](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-194.png)
![193ApplicationsInitializing settingsYou can initialize the channel setting and 1Seg setting.1From the Home screen, tap and tap [1Seg].2Tap [Setting]u[Reset] to select an item to initialize.3Tap [ YES].For some data broadcasting programs, link information to related websites (TVlink) is displayed. Save TVlinks to connect to related websites later.Saving TVlinks1On the 1Seg watching screen (with data broadcasting) (P.189), select TVlink to store.･After this step, follow the onscreen instructions.Display TVlinks1On the 1Seg watching screen (P.189), tap .2Tap [TVlink].･A TV link list screen appears.3Select a TVlink.･When selecting a link content or HTML content, tap [Yes].❖Information･Some TVlinks have period of validity. Out of date TVlinks are no longer available.Viewing/Deleting details of TVlink1On the 1Seg watching screen (P.189), tap .2Tap [TVlink] and tap .❖Information･On the TVlink list screen, touch and hold a TVlink to display menus for displaying detailed information, etc.Using TVlinksCheck the number of registrationCheck the number of stored TVlinks.Delete allDelete all stored TVlinks.Delete selectedDelete several stored TVlinks.Mark a TVlink to delete and tap , tap [Delete data?]u[YES].](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-195.png)
![194ApplicationsReserve recording/viewing TV program.1From the Home screen, tap and tap [1Seg].2Tap [Reservation]u"Recording" tab/"Watching" tab.3Tap and [New].4Tap [Channel name] to select a channel.5Set Program name, Start date/time, etc. and tap [Done].･When setting Recording reservation, set End time.Record images, sound, captions or data broadcasting while displaying.1On the 1Seg watching screen (P.189), tap then tap [Start recording].2On the 1Seg watching screen (P.189), tap then tap [Stop recording]u[YES].❖Information･Maximum recorded data file size is 4GB, and maximum continuous recordable time is approximately 24 hours.Items can be saved up to 99.･Recorded data is saved on a microSD card. Recording is not available if a microSD card is not attached.･When you use the microSD card from another application during recording, recording may be failed.Play a recorded program.1From the Home screen, tap and tap [1Seg].2Tap [Recording data] and a program to play.1From the Home screen, tap and tap [1Seg].2Tap [Program guide].･After this step, follow the onscreen instructions.Reservation of recording/viewing TV programRecording 1SegUsing program guide](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-196.png)
![195ApplicationsYou can listen to the FM radio with the terminal. Tuning can be made automatically or manually, and you can register your favorite channels to Favorites. To use FM radio, use a handsfree device such as Stereo Headset with Microphone (Sample), etc. or a headphone. They work as antenna.1Connect Stereo Headset with Microphone to the terminal.･For connection of Stereo Headset with Microphone, see "Using Stereo Headset with Microphone" (P.218).2From the Home screen, tap , then tap [FM radio].･FM radio screen appears and selecting channel starts automatically. The search ends when radio waves are received.3Tap / to select channel.･You can select channel by flicking the screen left and right.4Tap .5Enter a name, select a color, then tap [Save].･The frequency bands of selected channels are registered to Favorites.6To stop the FM radio, tap .❖Information･Alternatively, on the FM radio screen, tap and [Search for channels] to search.･Up to 8 one-byte or two-byte characters can be entered as a favorite name.･You can return to the Home screen to perform another operation while listening to FM radio in the background. To return to the FM radio screen, from the Home screen, tap then tap [FM radio], or drag the status bar downward and tap [FM radio].･When the docomo mini UIM card is not inserted, the frequency band range is 87.5MHz - 108.0MHz. You cannot listen to the FM radio programs in Japan.FM radioSearching and registering channels](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-197.png)
![199Applications1From the Home screen, tap and [Camera].･The still picture shooting screen (P.198) appears.2On the shooting screen, tap the capturing mode icon (P.199), then select capturing mode.Capturing mode icon■ Capturing mode Superior autoThe camera detects its state such as fixed ( ) and moving ( ) and determines most suitable scene effect. When the state is detected, an icon appears. When scene is recognized, scene icon and scene name appear."Soft snap", "Landscape", "Backlight", "Backlight portrait", "Night scene", "Night portrait", "Document", "Macro", "Low light", "Infant", or "Spotlight" is recognized. NormalA standard shooting mode. Video cameraRecord videos (P.208). BurstImages can be taken continuously (P.217). Picture effectApply various picture effects to pictures (P.215). Sweep PanoramaShoot panoramic image with wide angle (P.216). Scene selectionSet programmed scenes (P.201). Front cameraShoot pictures using the front camera (P.213). Front videoRecord videos using the front camera (P.213).Changing shooting mode](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-201.png)
![200ApplicationsTap the shutter icon ( ) or shooting screen to shoot still pictures. Shot still pictures are automatically saved in the internal storage or a microSD card.1From the Home screen, tap and [Camera].･The still picture shooting screen (P.198) appears.■Shooting with the shutter iconTap on the shooting/recording screen.･To shoot still pictures using auto-focus function, touch and hold and release your finger when the focus frame turns blue and sound beeps. A picture is taken as soon as you release the finger. If the focus frame does not appear, auto-focus does not operate correctly.■Shooting with "Touch capture"Set "Touch capture", then tap around a displayed frame on the shooting screen.･To set "Touch capture", on the recording screen, tap , then tap [Touch capture]u[On].･To shoot still pictures using auto-focus function, touch and hold the screen and release your finger when the focus frame turns blue and sound beeps. A picture is taken as soon as you release the finger. If the focus frame does not appear, auto-focus does not operate correctly.❖Information･When you connect Stereo Headset with Microphone (Sample), commercially available earphone set or other Bluetooth device, shutter sound may be softer. Shooting still pictures](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-202.png)
![201Applications1From the Home screen, tap and [Camera].･The still picture shooting screen (P.198) appears.2On the shooting screen, tap , then tap item to set.･Several setting icons are displayed on the shooting screen in advance. The displayed setting icons change depending on the setting conditions.･When capturing mode (P.199) is set to "Burst", "Picture effect" or "Sweep Panorama", tap the setting item icon displayed on the shooting screen to change the setting.･For setting items and icons, see "Still camera setting" (P.201).3Tap an option in the selected setting.･If you change setting options, icons displayed on the shooting screen change to the set items.❖Information･To replace setting item icons displayed on the shooting screen, tap on the shooting screen and touch and hold a setting item and drag it to a dotted frame.･To delete a setting item icon displayed on the shooting screen, touch and hold an icon and drag it to displayed in the center of the screen.･When capturing mode (P.199) is set to "Burst", "Picture effect" or "Sweep Panorama", a setting item icon cannot be replaced or deleted.･ or capturing mode icons (P.199) displayed on the shooting screen cannot be moved or deleted.Still camera setting■ ScenesUse Scenes to quickly set up the camera for various scene conditions.The setting is available only when the capturing mode (P.199) is set to "Scene selection". Soft skinShoot a picture making human skin look smoother. Soft snapSettings are optimized to give brighter and warmer skin tones. Anti motion blurReduce blur without flash when taking portraits indoors. LandscapeShoot landscape depicting trees with vivid color and focusing on distant objects. Backlight correction HDRCorrect backlight with the high dynamic range imaging function.Changing the shooting settings](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-203.png)
![208Applications❖Information･For available setting items when the capturing mode (P.199) is set to "Front camera", see "Front camera" (P.213).･Some settings cannot be used in combination with one another.Tap the start recording icon ( )/stop recording icon ( ) or tap the recording screen for starting/stopping recording a video. Recorded videos are automatically saved in the internal storage or a microSD card.1From the Home screen, tap and [Camera].2On the shooting screen, tap the capturing mode icon (P.199), then tap [Video camera].･The video recording screen (P.198) appears.■Recording with the start recording icon/stop recording iconOn the recording screen, tap to start recording, and tap to stop recording.■Shooting with "Touch capture"Set "Touch capture", then tap around a displayed frame on the recording screen to start recording, and tap the recording screen to stop recording.･To set "Touch capture", on the recording screen, tap , then tap [Touch capture]u[On].❖Information･Alternatively, tap in Step 2 to start recording.･Do not cover the microphone with fingers etc. when recording videos.･When you connect Stereo Headset with Microphone (Sample), commercially available earphone set or other Bluetooth device, shutter sound may be softer. 1From the Home screen, tap and [Camera].2On the shooting screen, tap the capturing mode icon (P.199), then tap [Video camera].･The video recording screen (P.198) appears.Recording videosChanging the recording settings](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-210.png)
![213ApplicationsFront camera allows you to shoot your own picture or video while watching the shooting screen.1From the Home screen, tap and [Camera].･The still picture shooting screen (P.198) appears.2Tap on the shooting/recording screen.3Shoot photo/video.･For information on how to shoot, see "Shooting still pictures" (P.200) or "Recording videos" (P.208).❖Information･Alternatively, on the shooting screen, tap the capturing mode icon (P.199), then tap [Front camera]/[Front video] to switch to the Front camera/Front video camera.･When using Front camera, "Resolution", "Self-timer", "Smile Shutter", "HDR", "Image stabilizer", "Soft skin effect", "Geotagging", "Auto upload(photo)", "Touch capture", "Data storage" can be set. Other "Still camera setting" (P.201) are not supported by Front camera.- Resolution for front camera is "2MP" ("1.8MP" when "HDR" is set to "On"), "1.7MP", "VGA".- The settings take over the camera settings set at the time when switching.･For using Front video camera, "Video resolution", "Self-timer", "Image stabilizer", "Geotagging", "Microphone", "Touch capture", "Data storage" can be set. Other "Video camera setting" (P.209) are not supported by Front video camera.- The settings take over the camera settings set at the time when switching.Quick launch allows you to activate camera to shoot without unlocking the screen lock.❖Information･By default, on the unlock screen, tap to activate camera.･To use Quick launch, on Preferred apps settings (P.148), set "Set all to" or "Lock screen" to "Xperia™" in advance. And set screen unlocking method (P.152) to "Swipe/Touch".1On the unlock screen, drag / to the left.･"Launch only (still camera)" to activate the camera is set by default.･To shoot using Quick launch, make setting from the shooting screen. For details, see "Quick launch" (P.204).Front cameraQuick launch](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-215.png)
![214ApplicationsUse Face detection to focus on a face located away from the center. The camera detects up to 5 faces and selects 1 face for auto focus. The camera determines the most suitable face according to the balance of distance from the camera and from the center. A selected face is surrounded with a yellow frame and automatically focused on. You can select a face to focus on by tapping a frame.Setting face detection1From the Home screen, tap and [Camera].･The still picture shooting screen (P.198) appears.2On the shooting screen, tap the capturing mode icon (P.199), then tap [Normal]/[Video camera].3On the shooting screen, tap and [Focus mode]u[Face detection].Shoot using face detection1With Face detection set, point the camera at the object.･Each detected face is framed (up to 5 faces).2Tap the frame you want to focus on or let the camera select which face to focus on without tapping.･A yellow frame shows the face in focus.3Shoot photo/video.･For information on how to shoot, see "Shooting still pictures" (P.200) or "Recording videos" (P.208).Smile shutter allows you to capture a face just as it smiles. The camera detects up to 5 faces and selects 1 face for smile shutter and auto focus. A selected face is surrounded with a yellow frame and when the selected face smiles, the frame turns to blue and the camera automatically takes a photo.Face detectionSmile Shutter](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-216.png)
![215ApplicationsSetting smile shutter1From the Home screen, tap and [Camera].･The still picture shooting screen (P.198) appears.2On the shooting screen, tap , then tap [Smile Shutter].3Select smile level for the smile shutter.Taking a photo using smile shutter1Set smile shutter, and point the camera at the object.･Each detected face is framed (up to 5 faces).･The camera selects which face to focus on. A yellow frame shows the face in focus.2The camera automatically takes the photo when a face in focus smiles.･Shot pictures are automatically saved in the internal storage or a microSD card.･If no smile is detected, operate the steps in "Shooting still pictures" (P.200) to shoot a picture.Picture effect allows you to shoot pictures with various picture effects.Setting picture effects1From the Home screen, tap and [Camera].･The still picture shooting screen (P.198) appears.2On the shooting screen, tap the capturing mode icon (P.199), then tap [Picture effect].3Select a picture effect.･Select from "Nostalgic", "Miniature", "Vivid", "Filter", "Fisheye", "Sketch", "Partial color", "Harris shutter" or "Kaleidoscope".❖Information･On the screen for selecting a picture effect, press m to capture a screenshot.･Resolution for the picture effect is "2MP". The resolution cannot be changed.Picture effect](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-217.png)
![216ApplicationsTaking a picture using picture effect1Set picture effect, and point the camera at the object.･Tap or pinch to change the picture effect setting.2Tap .･Shot pictures are automatically saved in the internal storage or a microSD card.❖Information･When you take a picture using picture effect, "Touch capture" (P.200) is not available.Use Sweep Panorama to shoot panoramic image with wide angle.Aligning the white frame on the screen with the black frame, move the camera slowly toward the set shooting direction to shoot.Setting Sweep Panorama1From the Home screen, tap and [Camera].･The still picture shooting screen (P.198) appears.2On the shooting screen, tap the capturing mode icon (P.199), then tap [Sweep Panorama].･Tap / to set "Shooting direction" (P.207) or "Photo light" (P.207).Shooting Sweep Panorama1Set Sweep Panorama, point the camera at the object.2Shoot a still picture.･For information on how to shoot pictures, see "Shooting still pictures" (P.200).･A white frame and big black frame appear on the shooting screen.3Aligning the white frame with the black frame, slowly move the camera from left to right.･If you change shooting direction, slowly move the camera in the set direction.･Shot pictures are saved automatically in the internal storage or a microSD card.❖Information･For shooting with Sweep Panorama, always hold the camera horizontally.Sweep Panorama](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-218.png)
![217ApplicationsUse Burst to shoot a series of images.Setting continuous shoot1From the Home screen, tap and [Camera].･The still picture shooting screen (P.198) appears.2On the shooting screen, tap the capturing mode icon (P.199), then tap [Burst].･Tap / to set "Burst speed" (P.207) or "Photo light" (P.207).Shoot continuous images1Set Burst and point the camera to an object.2Touch and hold .･Pictures are continuously shot while is touched and held.･Shot pictures are automatically saved in the internal storage or a microSD card.❖Information･"Touch capture" (P.200) is not available while Burst is set.Photos or videos that you took with the terminal or multimedia contents (music, photos, videos, etc.) saved in the internal storage or microSD card are viewed/played in applications such as "Media Player", "WALKMAN", "Album".The terminal can play the following multimedia contents:Continuous shootingPlaying multimedia contentType File formatSoundWAV (PCM, G.711) (.wav), AAC (.3gp, .m4a, .mp4), AAC+ (.3gp, .m4a, .mp4), eAAC+ (.3gp, .m4a, .mp4), MP3 (.mp3), AMR-NB (.3gp), AMR-WB (.3gp), MIDI (SP-MIDI/GM/GML (.mid), XMF (.xmf), Mobile XMF 1.0 (.mxmf), RTTTL/RTX (.rtttl, .rtx), OTA (.ota), iMelody (.imy)), Ogg Vorbis (.ogg), FLAC (.flac), PIFF (.isma)Still imageJPEG (.jpeg, .jpg), GIF (.gif ), PNG (.png), BMP (.bmp), WEBP (.webp)VideoH263 (.3gp, .mp4), H264 AVC (.3gp, .mp4), MPEG-4 SP (.3gp), VP8 (.webm, .mkv), Xvid (.avi), Quicktime (.mov), PIFF (.ismv)](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-219.png)
![219Applications❖Information･When you listen to Media Player/WALKMAN/FM radio with Stereo Headset with Microphone connected to the terminal, you can switch on/off by pressing the switch of Stereo Headset with Microphone. However, operation may differ depending on the conditions of use.･When using the supplied 1Seg antenna cable SO01, connect Stereo Headset with Microphone with the 1Seg antenna cable SO01 (P.188).When you do not watch 1Seg, Stereo Headset with Microphone can be used without the 1Seg antenna cable SO01 connected.･If receiving a call when using Stereo Headset with Microphone, music or 1Seg program stops, and the ringtone sounds.- If receiving a call when using Media Player, playing music resumes by tapping the play key on the Media Player screen after the call ends.- If receiving a call when using WALKMAN, playing music resumes when the call ends.- If receiving a call while watching 1Seg program, 1Seg program restarts by displaying 1Seg watching screen after call.･If you connect a commercially available earphone set, sound may not be output depending on the earphone set.Images, photos and videos you took can be viewed and played. Also, use Media Go to transfer content to the terminal and to take content from an external device. For details, refer to "Connecting to a PC with microUSB cable" (P.171).1From the Home screen, tap , then tap [Album].･Album screen appears.･ is displayed for video files.❖Information･Depending on the number of saved images, it may take some times to load images.AlbumViewing photo/video](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-221.png)
![221ApplicationsSharing image filesYou can share image files by attaching to Gmail or Email, uploading to Picasa or Google+, or sending to other devices via Bluetooth or infrared communication.1On the photo viewing screen/video playing screen, tap the screen and tap .･Menu for sharing image file appears.･Tap [See all] to display all share menus.2Select sharing method for image file.･After this step, follow the onscreen instructions.❖Information･Different options may be shown or some items cannot be operated in some image files.･To operate several files, on the album screen, tap and [Select items] to select image files.･When you select "Infrared" in Step 2, the Send via infrared message appears. Tap [OK] to start sending. For details on infrared communication, see "Using infrared communication" (P.164).･For shared files, file size and the file type are not particularly limited, but may be limited by the application to transfer. DRM content cannot be shared.Deleting image files1On the photo viewing screen/video playing screen, tap and tap [OK].･Image file is deleted.❖Information･To delete several files, on the album screen, tap and [Select items], then select image files to delete, and then tap and tap [OK].Using optional menuView slideshow, edit image, set image to phonebook entry or as wallpaper, check shooting date and time, etc.1On the photo viewing screen/video playing screen, tap the screen and tap .2From the displayed menu, select item you want to use.･After this step, follow the onscreen instructions.❖Information･Different options may be shown or some items cannot be operated in some image files.･In Step 2, tap "Throw" to display the connection device selection screen (if no devices are found, tap [Add new device] to make the setting). Select a device on the connection device selection screen to share files between a DLNA device, Bluetooth device, or screen mirroring device and the terminal.Operating image files](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-223.png)
![222ApplicationsYouTube is a free online video streaming service. You can play, search for and upload videos.･A packet communication charge is applied when downloading or uploading video content using mobile networks.1From the Home screen, tap , then tap [YouTube].･If you do not set Google account, the Google account setting screen appears. Follow the onscreen instructions.･A list of videos appears. You can select from categories.2Tap a video to play it.･Tap the screen to display play/pause icon or progress bar. Drag the marker left or right on the progress to change playing point.･Turn the terminal sideways to switch to the landscape view.･Tap x to stop playing and return to the video list screen.･To quit YouTube, tap y.❖Information･For movies with caption function which can display subtitles, "CC" appears on the playback screen in the landscape mode. Tap [CC] to set the caption function.･When "HD" or "HQ" appears while playing in the landscape view, tap [HD]/[HQ] to play in high quality. A video plays in high quality when Wi-Fi is connected. To always play video in high quality even when mobile network is connected, tap , then tap [Settings]u[General] then mark "High quality on mobile" checkbox.･Tap to search videos. To delete search history, tap and [Settings]u[Search]u[Clear search history]u[OK].You TubePlaying YouTube video](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-224.png)
![223ApplicationsThis terminal supports MHL connection. To connect to an MHL compatible TV, insert a commercially available MHL cable into the microUSB jack of the terminal and the MHL jack of the TV.To connect to an HDMI compatible TV, use a commercially available HDMI connector (MHL adapter) and an HDMI cable etc. to connect to the terminal.Connect to a TV to display photos and videos on the TV screen.1Connect the terminal with the Home screen or Application screen displayed to a TV using an MHL cable.■When the Home screen is displayed･Activate TV launcher automatically.■When the Applications screen is displayed･, appears on the status bar. Also, drag the status bar downwards and tap [TV launcher] to activate TV launcher.2Switch the TV to MHL input mode.･The screen of the terminal is shown on the TV screen.3Flick an icon left or right to select application you want to use.❖Information･While MHL is connected, drag the status bar downwards and tap [MHL connected] to make output settings or check using a TV remote control etc.･On the TV launcher screen, select an album art in WALKMAN at the upper left to display WALKMAN screen.･On the TV launcher screen, Tap [Home] to display the Home screen of the terminal.･On the TV launcher screen, tap [Add] or and tap [Add], then select the desired shortcut to add to the TV launcher screen.･On the TV launcher screen, tap and [Rearrange] to rearrange shortcuts on the TV launcher screen.･On the TV launcher screen, tap and [Delete] to delete shortcuts on the TV launcher screen.･Removing the MHL cable from the terminal severs connection, however, TV may remain to MHL input mode or HDMI input mode. Follow the instructions on the TV to switch to digital terrestrial television mode, etc.Connecting the terminal to TV to watch photos and videosConnecting to TV to activate an application by TV launcher](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-225.png)
![224Applications･When you do not use MHL connection, remove the MHL cable or HDMI adapter and cancel MHL connection. If the HDMI cable remains connected, the battery may be consumed quickly.･The terminal does not support resolution 720×576p at 50Hz for MHL output to TV.･You can operate the TV Launcher screen, the Home screen or applications using a TV remote controller if connecting the following devices.- MHL compatible TV supporting Remote Control Protocol (RCP)- HDMI compatible TV supporting Consumer Electronic Control (CEC)To connect to an HDMI compatible TV, a commercially available HDMI connector (MHL adapter) compatible with RCP is required.Some applications may not support remote control operations.Play back music and videos stored on the internal storage or a microSD card using Media Player.･For information on how to copy music and video data from a PC, see "Connecting to a PC with microUSB cable" (P.171).･For information on file formats of playable data, see "Playing multimedia content" (P.217).1From the Home screen, tap , then tap [Media Player].･Media Player screen appears.■ Media Player screenaTab･Change displayed information.･Flick left or right.bView optional menu❖Information･To change the order of tab icons, tap and tap [Settings]u[Arrange icons], drag up and down on the item to change then tap [Apply].Media PlayerActivating Media Playerab](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-226.png)
![225Applications1From the Home screen, tap , then tap [Media Player].･Tap [Movie] tab at the bottom of the screen to display video list.2Tap a song/video.･The playback screen appears to start playing back music/video.■ Music playback screenaBack to song listbGo back to the beginning of the track or to the previous track/Play or pause/Skip to the next trackcPlayback point･Appears when album art is tapped.dView optional menueAlbum artfSong informationgRepeat OFF/Repeat ON/1 track repeathShuffle OFF/Shuffle ONiVolume control･Alternatively, press m during playback to adjust volume.❖Information･You can return to the Home screen to perform another operation while listening to music in the background. To return to the music playback screen, from the Home screen, tap then tap [Media Player], or drag the status bar downward to tap the name of song that is being played.■ Video playback screenaBack to video listbGo back to the beginning of the video or to the previous video/Play or pause/Skip to the next videocPlayback pointdView optional menueVideo informationfAuto-rotate screen ON/OFF･Tap to turn red and disable Auto-rotate screen.gVolume control･Alternatively, press m during playback to adjust volume.Playing music/videoaacgefdibhcbaafdeg](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-227.png)
![226Applications❖Information･While in landscape mode, tap the screen to display option menu icons etc.You can play back songs in the order you decided using playlist.Creating a playlist1From the Home screen, tap , then tap [Media Player].2Flick left and right on tabs at the bottom of the screen and tap [Play list].･Play list screen appears.3Tap [Create new] and enter the access point name and tap [OK].4Tap [Add songs to playlist] and select songs you want to add.･You can also select songs from "Artists" and "Albums".･ on the selected song turns red and the song is added to Play list by each tap.5Tap [Apply]u[Save]u[OK].Editing songs in playlist1On the play list screen, select a playlist to edit and tap [Edit].■Changing order of the songsDrag up and down in song to change order and tap [Save]u[OK].■Deleting songs from playlistSelect a song to delete and tap [Save]u[OK].Deleting playlist1On the play list screen, tap [Edit].2Tap a playlist you want to delete.3Tap [Save]u[OK].❖Information･"Recently added songs", "Recently played songs", and "Most played songs" playlists cannot be deleted.Play list](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-228.png)
![228Applications･Some wireless communications products (mobile phone, data detectors and some others) block satellite signals and also causes instability of signal reception.･Some map displays based on location information (latitude/longitude information) may be not accurate due to some countries' or regions' regulations.■ Where radio waves are difficult to receiveNote that radio waves may not be received or it may be difficult to receive radio waves in the following conditions, since GPS uses radio waves from a satellite.･Inside or immediately under a building･Inside a bag or box･Inside or under a thick covering of trees･In a car, inside a train compartment･When there are obstructions (people or objects) near the terminal･Inside a basement or tunnel, and below the ground or water･In buildings-clustered or residential area･Near a high-voltage cable･Bad weather such as heavy rain or snow❖Note･If some of the GPS functions are not available, or if none of them are, check that your contract includes the use of the Internet, and see "Wireless & networks" (P.128).･NTT DOCOMO is not liable for navigation services or for the accuracy of location services.Activating GPS/Location servicesYou can position current location using GPS, Wi-Fi or information sent from base stations of mobile network.1From the Home screen, tap , then tap [Settings].2Tap [Location services].3Tap or drag right for Access to my location.4Read note on GPS location services and tap [Agree], then read Location consent and tap [Agree].･"GPS satellites" and "Google's location service" are marked.❖Information･The note for location information may appear in Step 4.･Alternatively, drag the status bar downwards and tap [GPS] to turn on/off GPS. To activate, read the note on GPS location services and tap [Agree].･Users location information is sent to Google without specifying who they are. Some location information is stored even when the application is not running.･"GPS satellites" and "Google's location service" can be set individually.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-230.png)
![229Applications■ Using My location info in Google applicationTo identify the current location with Google application such as Google Maps, you need to allow the Google application to access location information.When you set a Google account, set the location information settings from Privacy in the account. For details on Google account, see "Setting Google account" (P.156).･Turn on the location information service setting beforehand (P.228).1From the Home screen, tap , then tap [Settings].2Tap [Google]u[Location settings].3Tap or drag right of Access to my location.The Google Maps application allows you to view your current location, find other locations and search routes.❖Information･To use Google Maps, enable data traffic (LTE/3G/GPRS) or connect to Wi-Fi.･Google Maps does not cover the whole world.･Only using LTE/3G/Wi-Fi connection may not detect some locations.･Google may provide updated service or function.1From the Home screen, tap and [Maps].･When a message appears, follow the onscreen instructions.･A map screen appears.Finding the current location on the mapYou can detect your current location using location information service.❖Information･To detect current location, enable the location information service (P.228) beforehand, then allow Google application to access the location information (P.229). If you do not set a Google account, on the map screen, tap and [Settings]uTap [Location settings].1On the map screen, tap .･The blinking blue mark shows the current location.･If you tap , the terminal's geomagnetic compass links the direction displayed on the map.Using Google Maps](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-231.png)
![230ApplicationsZooming in or out on a map1Pinch in/out the map screen.❖Information･Alternatively, double-tap the screen to zoom in.Viewing Street ViewStreet View does not cover some areas. For uncovered area, Street View icon appears in light gray.1Touch and hold a spot on the map that you are going to look at in Street View.2Tap the displayed call-out.3Tap [Street view]u[OK].･On the Street View display, tap and tap [Compass mode]. The compass in Street View shows the same direction as the terminal's geomagnetic compass.Searching for a location you want to look at1On the map screen, tap .2Fill out the search bar.･You can enter addresses, city names, business types and institution names (for example, London and art museum).･When a list of places matched to the entered letters appears on the screen, tap a place in the list to check the location on the map.3Tap on the software keyboard.･Search result appears on the map.･When "Did you mean:" appears at the top of the map or "RESULT LIST" appears at the bottom of the map, tap to select the place to view.4Tap a destination.･A detailed information screen appears.❖Information･On the detailed information screen, you can check the route or phone number for the searched location. The items displayed vary depending on the location.･On the map screen, tap to select a category such as "Restaurants", "Cafes" and show it on the map.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-232.png)
![231ApplicationsChanging the layersYou can select information to overlay on the map.1On the map screen, tap .2Tap information to display.･Traffic information and routes are not available in all locations.Getting directionYou can receive detailed guides for your destination.1On the map screen, tap .2Enter a start point in the upper entry field, and an end point in the lower entry field.･Alternatively, tap at the right of the input field to select a Start point and End point from "My location"/"Contacts"/"Point on map"/"My Places".3Select a transportation from (Driving)/ (Transit)/ (Walking).･When you select transit, you can select preferred transit or conditions.4Tap [GET DIRECTIONS].■Going by car/on footDirection is shown on a map.■Going by public transportTrip list appears. Select a route to check details.❖Information･After Step 4, tap to use easy route search with My Location as Start point.TrafficShow traffic condition.SatelliteDisplay satellite photo.TerrainDisplay geological formation.Transit LinesShow route information.LatitudeJoin Latitude.My MapsView My Maps that you create on a PC. Only viewing : You cannot create My Maps on the terminal.WikipediaDisplay .Tap to display a Wikipedia article related to the location.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-233.png)
![232ApplicationsClearing the MapsClear displayed layers, route search results and some others.1On the map screen, tap and tap [Clear Map].Google Latitude enables you to share location information with your friends on the map.You need to set up a Google account (P.156) and join Latitude and invite a friend who gives his or her location information, or to receive an invitation from him or her.Joining LatitudeYou need to turn on the location information service setting beforehand. For details, see "Activating GPS/Location services" (P.228).1On the map screen, tap [Maps] u[Latitude].･If you do not set Google account, tap [Join Latitude] to display the Google account setting screen. Follow the onscreen instructions.2Tap [MAP VIEW].❖Information･To set or disable Latitude, tap on the map screen, then tap [Settings]u[Location settings] to display a screen for the operation.･For details of Latitude, tap on the map screen, then tap [Help]u[How to]u[Additional Maps features]u[Latitude] to view the help.The terminal has a built-in calendar for the schedule. If you have a Google account etc., you can synchronize the terminal's calendar and web calendar. For details, see "Setting an account" (P.156).･When a Google account is set, tap [Sync Calendar] in the Sync items of Google account (P.157).Checking where a friend is by Google LatitudeCalendar](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-234.png)
![233Applications1From the Home screen, tap , then tap [Calendar].･A calendar screen appears.2Tap [Month]/[Week]/[Day].･Tap to move the cursor to date and time set on the terminal. Number displayed on the icon shows the current date.･Flick the calendar left or right to display the next or previous month/week/day according to the view mode.･Pinch out/in on the weekly or daily schedule screen to zoom in/out calendar.1Tap on the calendar screen.2Enter a name, date and time, location, description for event.3Tap [Done].❖Information･When you set a Google account, you can select an account to create schedule to in Step 2.･Tap beside "Add reminder" to add a new notification.･Tap in "More" and flick up the screen to set "Repetition", "Attendees", "Time zone", "Show me as:", "Privacy".Displaying events in Calendar1On the calendar screen, display date or time when event is scheduled.･On the month display screen, tap a date in which event is scheduled.2Tap an event to view description.❖Information･On the calendar screen, tap and [My calendars] to synchronize with the docomo account. You can view the events created in "Schedule" app in the Calendar.･If you log in to Facebook, tap [Sync Calendar] in "Xperia™ with Facebook" (P.158) to display events in Facebook in the Calendar.Displaying calendarCreating a schedule in Calendar](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-235.png)
![234ApplicationsSearching events in Calendar1On the calendar screen, tap , then tap [Search].2Enter a keyword and tap on the software keyboard.･Search results appear. Tap an event to view details.Deleting events from Calendar1On the calendar screen, display date or time when event is scheduled.･On the month display screen, tap a date in which event is scheduled.2Touch and hold an event you want to delete.3Tap [Delete event]u[Delete].❖Information･To delete all events, tap on the Calendar screen, then tap [Settings]u[Delete all events]u[Delete].When scheduled time arrives, appears on the status bar.1Drag the status bar downwards.2Tap [Snooze]/[Dismiss].･Tap [Snooze] to show pop-up menu and select snooze interval. After set time elapses, notification appears again.❖Information･Snooze means a function with which reminder once dismissed reactivates after a while.Set Calendar view, way to notify, Default reminder time, phrases for quick responses, etc.1On the calendar screen, tap , then tap [Settings].2Select an item to change.Canceling reminder or setting snoozeChanging calendar settings](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-236.png)
![235ApplicationsWith "Alarm & clock" app, you can set an alarm and use world clock, stopwatch and timer.1From the Home screen, tap , then [Alarm & clock].･Alarm screen appears.■ Alarm screenaClock display･Tap to view date and time (P.160) setting screen.bAdd alarm (P.235)cAlarm listdDisplay clock in full screeneView alarm screenfView world clock (P.236)gView stop watch (P.237)hView timer (P.237)iDeleting alarms (P.236)1On the alarm screen, tap [Add alarm].2Set time etc. and tap [Done].･Tap [Advanced alarm settings] to view all setting items.Alarm & clockadbceif g hSetting alarmTimeFlick up and down on numbers to set time.RepeatSet a day of the week for the alarm.Alarm sound*Set alarm sound.Snooze durationSet time interval to sound the ringtone again after stopping the ringtone.Alarm textEnter texts that appear while alarm is sounding.Style settingsMark the checkbox and tap to set displayed image and sounded alarm while sounding alarm.VibrateSet whether to vibrate at the alarm time.Alarm volumeDrag the slider left or right to adjust the volume level.Alarm in silent modeSet whether to sound alarm even in silent mode.Side keys behaviorSet behavior when pressing m while alarm is sounding.Auto silent timeSet time interval until alarm automatically stops.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-237.png)
![236Applications* If "Style settings" is marked, this setting is disabled. To set "Alarm sound", unmark "Style settings".❖Information･To switch on/off alarm, on the alarm screen, tap or touch and hold an alarm, then tap [Turn alarm on]/[Turn alarm off ].･When an alarm is turned on, the line under lights blue.Deleting the alarm1On the alarm screen, tap and mark alarm to delete.2Tap [Delete]u[Yes].･The number of marked alarms appears on the right of "Delete".❖Information･Alternatively, on the alarm screen, touch and hold an alarm you want to delete, then tap [Delete alarm]u[Yes] to delete the alarm.Stopping an alarm while the alarm is sounding1While alarm is sounding, drag to the right.❖Information･If you tap [Snooze], the alarm sounds again when the time set in "Snooze duration" (P.235) has passed.Display the date and time in cities around the world.1On the alarm screen, tap "World clock" tab.･World clock screen appears.2Tap [Add city].3Select a city.❖Information･Tap , then flick the city list left or right to check date and time corresponding to the cities.･Time display in cities during day-light saving time may differ from time difference to standard time (GMT) displayed on the screen when adding a city in Step 2.Changing World clockYou can switch, sort or delete Celsius/Fahrenheit displayed on World clock.1On the world clock screen, tap .■Setting home cityTap [Set home city] and select a city.■Switching Celsius/FahrenheitTap [Celsius]/[Fahrenheit].Using World clock](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-238.png)
![237Applications■SortingTap [Rearrange] and drag up and down beside added cities, then tap [Done].■DeletingTap [Delete] and mark cities you want to delete, then tap [Delete]u[Yes].･The number of the marked cities appears on the right of "Delete".･Alternatively, on the world clock screen, touch and hold a city you want to delete, then tap [Delete city]u[Yes] to delete.1On the alarm screen, tap "Stopwatch" tab.2Tap [Start].･Timer starts, and appears in the status bar.･Tap [Lap] to measure elapsed time.3Tap [Stop].･Tap [Start] to resume measuring.･Tap [Reset] to delete measured time and lap time.1On the alarm screen, tap "Timer" tab.2Tap [Set time].3Flick up and down on numbers to adjust the time and then tap [Done].4Tap [Start].･Timer starts, and appears in the status bar.5Tap [Stop].･Stop sounding alarm after a set time has elapsed.･Tap [Stop] within a set time duration to pause timer. Tap [Start] to resume timer.❖Information･Tap to set time from Timer history.･Tap and select an alarm sound, then tap [Done] to change the alarm sound.･While using a desired application, tap r and to use the timer of "Small apps" (P.88).Using StopwatchUsing Timer](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-239.png)
![238ApplicationsMove or back up data such as phonebook entries, sp-mode mails, bookmarks, etc. using external memory such as microSD card.･Do not remove the microSD card during backup or restoring. Doing so may damage the terminal data.･If the battery is low, backup or restore may not be done. In that case, charge the terminal and retry to back up or restore.･docomo apps password is required to back up or restore. For details on docomo apps password, see "docomo apps password" (P.148).❖Information･For details on docomo backup, tap , then tap [Help] to view the help.If microSD card is not installed, data such as images and movies are saved to the internal storage. You can back up only data such as images and movies stored in the internal storage. Data stored in microSD card cannot be backed up.1From the Home screen, tap , then tap [ドコモバックアップ (docomo backup)].2Tap [microSDカードへ保存 (save to microSD card)].･When you use for the first time, agree to "License agreement".3Tap [Backup].4Mark the data to back up.･Tap [Select all] to mark all data.5Tap [Start backup]u[OK].6Enter docomo apps password and tap [OK].･Data is backed up in a microSD card.ドコモバックアップ (docomo backup)Backing up](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-240.png)
![239Applications1From the Home screen, tap , then tap [ドコモバックアップ (docomo backup)].2Tap [microSDカードへ保存 (save to microSD card)].･When you use for the first time, agree to "License agreement".3Tap [Restore].4Tap [Select] on data type to restore and mark data to restore, and tap [Select].･Tap [Select latest data] to select the latest data for each data type.5Tap [Add]/[Overwrite] to select restore method and tap [Start restore]u[OK].6Enter docomo apps password and tap [OK].･Backed up data is restored.You can copy contacts data registered in Google account and in the terminal to docomo account.1From the Home screen, tap , then tap [ドコモバックアップ (docomo backup)].2Tap [microSDカードへ保存 (save to microSD card)].･When you use for the first time, agree to "License agreement".3Tap [Phonebook account copy], tap [Select] on Google account contacts you want to copy.4Tap [Overwrite]/[Add].･Phonebook data is copied to docomo account.❖Information･If phonebook item names (e.g. Phone number, etc.) of the other terminal are different from ones of your terminal, the item names may be changed or deleted. Also, some text may be deleted in copied destination, because savable characters in a phonebook entry vary by terminal.･When backing up phonebook entries to microSD card, data without Name cannot be copied.･If microSD card is low on memory, backup may not be done. In that case, delete unnecessary files to make available space.RestoringCopying phonebook entries registered in Google account to docomo account](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-241.png)
![240ApplicationsWith OfficeSuite, you can view files of Word, Excel, etc. from the terminal or a microSD card.❖Information･Some files may not be viewed properly due to corrupted layouts.1From the Home screen, tap , then tap [OfficeSuite].･OfficeSuite starts.❖Information･When you activate for the first time, a screen for register name etc. appears. Follow the onscreen instructions.OfficeSuiteStarting OfficeSuite](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-242.png)
![241International roamingInternation al roamingWith the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS.■ Supporting networksThe terminal is Class 4. The terminal works in a 3G roaming area and GSM/GPRS service area. Services are also available in countries and areas supporting 3G 850MHz/GSM 850MHz. Check available areas. Use 3G network or GSM/GPRS network overseas because Xi is not available overseas.■ Before using the terminal overseas, refer to the followings.･"Mobile Phone User's Guide [International Services]"･DOCOMO International Services website❖Information･For Country codes, International call access codes, Universal number international prefix, supported countries/areas and network operators, refer to "Mobile Phone User's Guide [International Services]" or DOCOMO International Services Website.* To use data communication during roaming, mark "Data roaming" checkbox in Mobile network settings (P.244).❖Information･Some services are not available depending on the overseas network operator or network.Overview of International roaming (WORLD WING)Available ServicesMain communication services 3G 3G 850 GSM (GPRS)Phone○○○Message (SMS)○○○Email*○○○Browser*○○○](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-243.png)
![243International roamingWhen you arrive overseas and turn on the terminal, an available network is automatically set.ConnectivityWhen you have set search mode of "Search mode" to "Automatic" in "Service providers" settings, optimized network is automatically selected (P.244).When you use a network operator of a country/region covered by the flat-rate service, you can use the service with flat-rate packet communication charges overseas up to the specified upper limit per day. To use this service, subscription of packet flat-rate service in Japan is required. For details, refer to "Mobile Phone User's Guide [International Services]" or DOCOMO International Services Website.DisplayDuring international roaming, appears on the status bar.･You can confirm the name of the connected network operator on the Notification panel.❖Note･While appears on the status bar, packet communication is available. Note that packet communication fee may become high.Date & time settingsWhen "Automatic date & time", "Automatic time zone" in "Date & time" are marked, the date, time and time differences of the terminal clock are corrected by receiving the information related to time and time differences from the network of overseas network operator you connect to. ･Correction of the time/time differences may not be performed correctly depending on the network of overseas network operator. In that case, set time zone manually.･Timing of correction varies by the overseas network operator.･Date & time (P.160)About inquiries･For loss or theft of the terminal or docomo mini UIM card, immediately contact DOCOMO from the spot to take the necessary steps for suspending the use. For inquiries, refer to the last page. Note that you are still liable for the call and communication charge incurred after the loss or theft occurred.･For using from land-line phone, entering "International call access code" or "Universal number international prefix" for the country is needed.After arriving overseas](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-245.png)
![244International roamingAfter returning to JapanWhen you return to Japan, the terminal is connected to DOCOMO network automatically. If connection is failed, perform the following operations.･Set "Network Mode" to "LTE (preferred)/WCDMA/GSM" (P.244).･Set "Search mode" to "Automatic" in "Service providers" settings (P.244).By default, the terminal automatically searches available network and connect to it. To switch network manually, set as follows.Setting network mode1From the Home screen, tap , then tap [Settings].2Tap [More...]u[Mobile networks]u[Network Mode].3Select a network mode you use.･You can select from "LTE/WCDMA" "GSM only" and "LTE (preferred)/WCDMA/GSM". If you select "LTE (preferred)/WCDMA/GSM" to switch available network automatically.Setting a network operator1From the Home screen, tap , then tap [Settings].2Tap [More...]u[Mobile networks]u[Service providers].･If a note appears, tap [OK].3Tap [Search mode]u[Manual].･To display available networks, tap [Search networks].4From "AVAILABLE NETWORKS", mark a network to use.❖Information･If you cannot search networks, disable mobile data communication (P.133) and then search again.･If you set a network manually, the terminal is not reconnected to another network automatically even if you move out of the network area.･To return to "Automatic", tap [Automatic] in Step 3.Setting data roaming1From the Home screen, tap , then tap [Settings].2Tap [More...]u[Mobile networks].3Tap [Data roaming].4Read the note and tap [Yes].･"Data roaming" checkbox is marked.Settings for overseas use](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-246.png)
![245International roamingWhen you arrive overseas and turn on the terminal, an available network is automatically set.･Check that the battery and signal levels are high enough.･Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly.In this case, calls cannot be made from the call log.You can make a call from overseas using the international roaming service.･You can easily make international calls from the country you stay to Japan or to other countries by entering prefix "+" and then the country code and phone number.1From the Home screen, tap , then tap "Dial" tab.2Dial + (touch and hold [0])uCountry codeuArea code (City code)uEnter a phone number.･If the area code begins with "0", omit "0". However, "0" may be required to dial to some country or area such as Italy.･To call an overseas "WORLD WING" user, enter "81" (Japan) for the country code.3Tap .4When the call is finished, tap [End call].❖Information･During international roaming, if you make an international call to Japan using "Phone" application, the "International dialing assist" screen appears. You can make a call without entering country code from that screen.For details on International dialing assist, see "Setting international dial assistance" (P.248).Making/Receiving calls in the country you stayMaking a call to outside country you stay (including Japan)](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-247.png)
![246International roamingYou can make a call by entering the phone number of the other party's land-line phone or mobile phone in the same way you do in Japan.1From the Home screen, tap , then tap "Dial" tab.2Enter a phone number.･To make a call to land-line phone, enter the area code (city code) + other party's phone number.3Tap .4When the call is finished, tap [End call].When the other party uses international roaming service, make a call as an international call to Japan even when you stay in the same country as the other party.You can receive a call using the international roaming service.1While receiving a call, touch and hold (left) and drag it to (right).2When the call is finished, tap [End call].❖Information･When you received a call during the international roaming, regardless of which country the call is from, it is forwarded internationally from Japan. A caller is charged for a call fee to Japan, and the receiver is charged for a reception fee.Making a call within the country you stayMaking a call to WORLD WING user overseasReceiving a call in the country you stay](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-248.png)
![247International roaming■ Having the other party call you･Having someone make a call from Japan to the country you stayTo have the other party make a call from a land-line phone or mobile phone in Japan to the terminal in the country you stay, the other party only needs to dial the phone number as in Japan.･Having someone make a call from other than Japan to the country you stayYou have to receive a call through Japan no matter where you are; therefore, the other party needs to enter the international call access code and "81" (Country code of Japan).International access code - 81 - 90 (or 80) - XXXX - XXXXMake settings for using international roaming or international calls.Set restricting incoming calls overseas or using roaming guidance.･For some overseas network operators, settings may not be made.Restricting incoming calls for roaming1From the Home screen, tap , then tap .2Tap [Call settings]u[Roaming settings].3Tap [Restricting incoming calls].･Select items you want to use.International roaming settingsSettings for making/receiving calls overseasActivate restrictingTap "Restricting all incomings" or "Restricting incoming of video call/64K data", enter the network security code, and tap [OK].Deactivate restrictingEnter the network security code and tap [OK].Check settingsCheck the current service settings.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-249.png)
![248International roamingSetting incoming notification on roaming1From the Home screen, tap , then tap .2Tap [Call settings]u[Roaming settings].3Tap [Incoming notification on roaming].･Select items you want to use.Setting roaming guidance1From the Home screen, tap , then tap .2Tap [Call settings]u[Roaming settings].3Tap [Roaming guidance].･Select items you want to use.Setting international dial assistance1From the Home screen, tap , then tap .2Tap [Call settings]u[Roaming settings].3Tap [International dial assist].･Select items you want to use.Activate incoming call notificationTap [OK] to activate roaming incoming call notification.Deactiv. incoming call notificationTap [OK] to deactivate roaming incoming call notification.Check settingsCheck the current service settings.Activate roaming guidanceTap [OK] to activate roaming guidance.Deactivate roaming guidanceTap [OK] to deactivate roaming guidance.Check settingsCheck the current service settings.Auto conversionInternational prefix or country code is automatically added.Country codeTap [OK] to select a country code which will be used for auto conversion.International prefixTap [OK ] to select an international prefix which will be used for auto conversion.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-250.png)
![249International roamingSettings Network service (overseas)Set network service such as voice mail from overseas.･If you make the settings overseas, you are charged a call fee to Japan from the country you stay.･For some overseas network operators, settings may not be made.1From the Home screen, tap , then tap .2Tap [Call settings]u[Roaming settings].3Tap [Network service].･Select items you want to use. You need to set "Remote operation" to activate (P.98).* Follow the voice prompts to operate.Voicemail(charged)Activate serviceTap [OK ].*Deactivate serviceTap [OK ].*Play messagesTap [OK]. After this step, follow the voice prompts to play the message.SettingsTap [OK ].*Ring time settingTap [OK ].*Incoming call notific.(charged)Tap [OK ].*Caller ID request (charged)Tap [OK ].*Roaming guidance (charged)Tap [OK ].*Remote operation (charged)Tap [OK ].*Call forwarding (charged)Activate serviceTap [OK ].*Deactivate serviceTap [OK ].*Check settingsTap [OK ].*](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-251.png)
![255Appendix/Index■Out of service area indicator appears･Check if you are out of the international roaming service area or in an area with poor signal strength. Check if the service area and network operator are available, referring to "Mobile Phone User's Guide [International Services]" or DOCOMO International Services website.･Change the network settings or overseas network operator settings.Set "Search mode" to "Automatic" in "Service providers".Set "Network Mode" to "LTE (preferred)/WCDMA/GSM".→P.243, P.244･Turning off the terminal and then turning on again may work for the restoration.→P.40Cannot perform data communication overseas.･Mark "Data roaming".→P.244The terminal suddenly became unavailable while using overseas.･Check if usage amount exceeds the limit of maximum charges for use.For use of "International roaming (WORLD WING)", the limit of maximum charges for use is set in advance. If exceeding the limit of maximum charges for use, pay the charges.Cannot receive calls overseas.･Is "Restricting incoming calls" set to "Activate restricting"?→P.247No caller ID is notified/A notified caller ID is different from that of the caller/Functions for using contents saved in phonebook or those using Caller ID notification do not operate.･Even if a caller notifies its caller ID, it is not displayed on the terminal unless the network or network operator notifies it. And a different caller ID may be notified depending on the network or network operator you use.■ Data managementData transfer is not performed.･Check if USB hub is used. If you use USB hub, operations may not be performed correctly.Data saved in microSD card is not displayed.･Remove the microSD card and insert it again.→P.33When trying to display an image, "×" appears instead of it.Or "×" appears for the demo play or the preview function.･"×" may appear instead of destroyed image data.](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-257.png)
![258Appendix/Index2From the Home screen, tap , then tap [遠隔サポート (Remote support)].･When you use for the first time, agree to "ソフトウェア使用許諾書 (License Agreement)".3Enter connection number notified by DOCOMO.4Remote support starts when you are connected.･Make sure that the warranty is received with the terminal upon purchase. Check to be sure that "販売店名・お買い上げ日 (the name of the retailer, date of purchase)", and other items have been filled out on the warranty before storing it in a safe place. If any necessary information is not provided, immediately contact the retailer and request to complete the warranty. The terminal comes with a year's free warranty starting from the date of purchase.･Specifications of this product and its accessories are subject to change for improvement without prior notice.･Data saved in the Contacts etc. may be changed/lost due to the trouble/repairs or handling of the terminal. DOCOMO recommends making a copy of the Phonebook data etc., in case.* You can save Phonebook data in a microSD card inserted to the terminal.* Data such as phonebook entries can be backed up to Data center using Data Security Service (subscription is required).If you have problems with the terminalBefore asking repair, see "Troubleshooting" (P.250) in this manual to check the problem. If the problem still persists, contact "Repairs" on the last page (in Japanese only).Warranty and After Sales ServicesWarrantyAfter Sales Services](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-260.png)
![261Appendix/IndexPrecautions on memory dial (Phonebook function) and downloaded dataNote that data you created or data you retrieved or downloaded from sources other than your terminal may be changed or lost when you change the model or have repairs done to the terminal. DOCOMO shall have no liability for any change or loss of any kind. Under some circumstances, DOCOMO may replace your terminal with its equivalent instead of repairing it.You can update the terminal to the most recent software for optimal performance and to get the latest enhancements.❖Note･When the terminal is connected to the Internet using the mobile network connection, data communication fee is applied.･Make sure you back up and save all data contained in the terminal before you start updating the terminal.･For the first time activating the terminal after software update, the operation may be slower from several minutes to several ten minutes due to data update. The required time varies by the data in the terminal. Do not turn the power off until usual operation speed comebacks.❖Information･For details on the software update, see the following website.http://www.sonymobile.co.jp/support/ (In Japanese only)Setting notification of Software updateYou can set to be notified of updating software.1From the Home screen, tap and tap [Settings]u[About phone]u[Software update].2Tap and [Settings].3Mark "Notifications".･To change the notification tone, tap [Notification tone], then tap notification tone you want to change, and then tap [Done].❖Information･If you mark "Notification vibration" in Step 3, software update is notified by vibration.Updating software](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-263.png)
![262Appendix/IndexDownloading software to updateSoftware can be downloaded wirelessly directly from your terminal via the Internet by using mobile network connection or by using a Wi-Fi network connection.1From the Home screen, tap and tap [Settings]u[About phone]u[Software update].2Tap "System" tab and then .･The terminal searches for software updates.❖Information･From the Home screen, tap and , then tap [Settings]u[About phone]u[Software update]u"System" tab and then tap .･"New apps"/"Updates" tabs in the Update Center screen are not available because the services are not provided in Japan.❖Note･For software update via mobile network, a high packet communication charge will be applied because of a large amount data communication. For this reason, subscription of packet flat-rate service is highly recommended.･While you are using roaming service overseas, you cannot download through the mobile network.Downloading the latest software update automaticallySearch the latest software update automatically on regular basis. If software update is searched, software is downloaded automatically and appears on the status bar.1From the Home screen, tap and tap [Settings]u[About phone]u[Software update].2Tap and [Settings].3Tap [Allow automatic downloads], read the notes and tap [Agree].･"Allow automatic downloads" is marked.❖Note･Note that if you tap from the Home screen, then tap [Settings]u[About phone]u[Software update] and tap then [Settings]u[Preferred data traffic]u[Via mobile network/Wi-Fi], a Wi-Fi connection automatically switches to mobile network communications when the Wi-Fi connection is unstable and packet communication fee may apply.･Note that packet communication fee may apply for searching automatically.Downloading software updates wirelessly](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-264.png)
![263Appendix/IndexYou can update software by using PC Companion that can be installed into a PC from the terminal.❖Information･To install PC Companion on a PC, an Internet connection is required.When PC Companion is not installed on your PC1Connect the terminal to a PC using a microUSB cable.2When "PC Companion software" screen appears on the terminal, tap [Install].･Installer of PC Companion starts on the PC.3Follow the onscreen instructions on the PC to install.･PC Companion starts on the PC after the installation is complete. If further software update is searched, it is automatically notified. Follow the onscreen instructions on the PC.When PC Companion is installed on your PC1Check if PC Companion is activated on the PC. If not, activate PC Companion from the Start menu.2Connect the terminal to a PC using a microUSB cable.3Follow the onscreen instructions on the PC.･If available software update is found, it is automatically notified.Connecting to a PC and updating](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-265.png)
![268Appendix/IndexYou can check details of certificate and compliance mark specific to the terminal (including certificate number/compliance number).1From the Home screen, tap , then tap [Settings].2Tap [About phone]u[Legal information]u[Certificates].Software delivered with this device and its media is owned by Sony Mobile Communications AB, and/or its affiliated companies and its suppliers and licensors.Sony Mobile grants you a non-exclusive limited licence to use the Software solely in conjunction with the Device on which it is installed or delivered. Ownership of the Software is not sold, transferred or otherwise conveyed.Do not use any means to discover the source code or any component of the Software, reproduce and distribute the Software, or modify the Software. You are entitled to transfer rights and obligations to the Software to a third party, solely together with the Device with which you received the Software, provided the third party agrees in writing to be bound by the terms of this Licence.This licence exists throughout the useful life of this Device. It can be terminated by transferring your rights to the Device to a third party in writing.Certificate and compliance End User Licence AgreementEnd User Licence Agreement](https://usermanual.wiki/Sony/PM-0320.User-Guide/User-Guide-1958488-Page-270.png)
