Sony PM-0400 GSM/UMTS Mobile Phone with WLAN, BT, RFID User Manual User Guide StartGuide
Sony Mobile Communications Inc GSM/UMTS Mobile Phone with WLAN, BT, RFID User Guide StartGuide
Sony >
Contents
- 1. User Guide Leaflet
- 2. User Guide StartGuide
- 3. user Guide StartGuide
User Guide StartGuide
![Basic ManualGaga/KDDI/Start guidePrefaceThank you for buying "XperiaTM UL" (simply called the "product" from here on). Before using your terminal, read "Basic Manual" (this manual) and "取扱説明書詳細版 (Full Instruction Manual)" (Japanese) to ensure safe use and handling.About Operating Instructions■Basic Manual (this manual)Handles only basic operations for main features.For detailed descriptions on various functions, refer to the "Instruction Manual" (Japanese) application installed on the product or "取扱説明書詳細版 (Full Instruction Manual)" (Japanese) available on the au homepage.http://www.au.kddi.com/torisetsu/index.html･Company names and product names referred to in this manual are trademarks or registered trademarks of respective companies. The TM, ® marks may be omitted in this manual.■"Instruction Manual" (Japanese) applicationThis product allows you to use the "Instruction Manual" (Japanese) application on the product to confirm detailed operational procedures.Certain functions can be directly activated from the application screens on which their operations are described.From the Home screen, [ ]X[Instruction Manual]･When you activate for the first time, follow the onscreen instructions to download and install application.■For Those Requiring an English Instruction ManualYou can download the English version of the Basic Manual from the au website (available from approximately one month after the product is released). Download URL: http://www.au.kddi.com/torisetsu/index.htmlSafety PrecautionsBefore you start using the product, make sure to read the "Notes on usage of XperiaTM UL" to ensure correct use.Before you assume that the product is malfunctioning, check for possible remedies in the following au Customer Support site of au homepage:http://cs.kddi.com/support/komatta/kosho/index.htmlWhen using the product･Communication is not possible even inside the service area in places where the signal does not reach (e.g. tunnels and basements). Also, communication is sometimes not possible in poor reception areas. Communication is sometimes interrupted if you move into a poor reception areas during communications.･Since this product uses radio waves, the possibility of communication intercepts by third parties cannot be eliminated. (Though LTE/CDMA/GSM/UMTS system has highly secure confidential communication features.)･This product is compatible with the international roaming service. Each network service described in this manual varies depending on the area and service content. For details, refer to the "Instruction Manual" (Japanese) application installed on the product or "取扱説明書詳細版 (Full Instruction Manual)" (Japanese) available on the au homepage.･Since this product is a radio station under the Radio Law, you may be asked to temporarily submit the product for inspection in accordance with the Radio Law.･The IMEI information of the cell phone is automatically sent to KDDI CORPORATION for maintenance and monitoring operational status of your cell phone.･Take care not to inconvenience people around you when you use the product in a public place.･To use it overseas, check the condition such as regulations of the country/region in advance.･When the product is used by a child, parents or guardians should thoroughly read the "Basic Manual" "Cautions on using XperiaTM UL" and "Specific Absorption Rate (SAR) of cell phones" and teach the child how to use it.■Use of the product is not allowed in the following places!･Do not use a cell phone while driving a car or riding a motorbike or bicycle. Failure to do so might cause a traffic accident. Use of a cell phone while driving a car or motorbike is prohibited by law. Use of a cell phone while riding a bicycle may be punishable by some regulations.･Do not use this product while you are aboard an airplane. Use of electric devices transmitting radio waves in airplane is prohibited by law. Some airline companies, however, allow their passengers to use cell phones. For details, contact the airline company you use.Regarding notations used in this document･In this manual, keys are represented by simplified illustrations such as x, y, r.･Operations of tapping menu items/icons/buttons on the screen etc. are indicated as [(name of the item etc.)].･Screen illustrations shown in this manual may look different from the actual screens. In some cases, minor details or a part of a screen may be omitted.･In this manual, "microSDTM memory card" and "microSDHCTM memory card" are abbreviated as "microSD memory card" or "microSD".･"The Company" as appears on the product refers to the following companies: Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANYManufactured by: Sony Mobile Communications Japan, inc.Using au災害対策 (au Disaster Countermeasure)You can use 災害用伝言板 (Disaster message board) or emergency early warning mail (Emergency earthquake information, disaster evacuation information, tsunami warning) and 災害用音声お届けサービス (Disaster Voice Delivery Service).1From the Home screen, [ ]X[au災害対策 (au Disaster Countermeasure)].au災害対策 (au Disaster Countermeasure) menu appears.■Using Disaster Message BoardDisaster Message Board service enables you to register information of well-being from an area of distress via LTE NET in case of large-scale disaster such as earthquake with a seismic intensity of over 6 lower.1au災害対策 (au Disaster Countermeasure) menu X[災害用伝言板 (Disaster message board)].❖Information･To register information of well-being, E-mail address (∼ezweb.ne.jp) is required. Set up E-mail address beforehand.■Using emergency early warning mailThe emergency early warning mail is a service that distributes emergency earthquake information or tsunami warning delivered from the meteorological bureau or disaster evacuation information delivered from the government or local public organization to all au cell phones in specified areas simultaneously.When you receive emergency earthquake information, ensure your safety and take proper action according to the situation around you. When you receive a tsunami warning, draw away from sea coast immediately and evacuate to safe place such as upland or well-built high building.1au災害対策 (au Disaster Countermeasure) menuX[緊急速報メール (emergency early warning mail)].❖Information･Reception of emergency early warning mail is notified by a special warning tone. It is not possible to change the warning tone.･Emergency earthquake information may not arrive before strong tremors in areas near the epicenter.･Tsunami warning is a notification delivered from the meteorological bureau (major tidal wave, seismic sea wave) to the area including target coast.･Disaster evacuation information is a service that distributes bulletins concerning residents' safety including evacuation advisories, evacuation orders and other warnings issued by the national and local governments.･The service is available only in Japan (it cannot be used overseas).･No information fee or communication charge is required for receiving emergency early warning mail.･KDDI is not liable for damages suffered by customers resulting from the service's information, lack or delay in the information caused by transmission or system breakdowns, or other events that are outside the responsibility of KDDI.･Refer to the Japan Meteorological Agency web page for details about distribution of emergency earthquake information.http://www.jma.go.jp/･You cannot receive emergency early warning mail when your cell phone is turned off or during a call.･Emergency early warning mail may not be received when your cell phone is communicating such as while sending/receiving SMS/e-mail or using the browser, or if you are in a place where signal does not reach even in the service area (e.g. in a tunnel, basement) or in a place with a poor reception.･You cannot receive the emergency early warning mail that the reception is failed.･This delivery system is different from emergency earthquake information provided through TV, radio, or other communication procedures, which means that the time the emergency earthquake information arrives may vary.･Information from someplace other than your current location may be received.■Using 災害用音声お届けサービス (Disaster Voice message service)Disaster Voice message service is a service which allows you to record your voice and send someone you want to inform your well-being in case of a large-scale disaster.1au災害対策 (au Disaster Countermeasure) menuX[災害用音声お届けサービス (Disaster Voice message service)].❖Information･Sending/Receiving voice messages is available only via LTE/3G network. Turn off wireless LAN (Wi-Fi®) before use.･Voice message can be recorded for up to 30 seconds.･Voice messages cannot be saved or played if the phone memory does not have available memory.Do you have everything?Before your start using the product, make sure that you have all the following packaged with the product.Getting ReadyNames and functions of partsaHeadset connection terminalbWhip antenna: Extend it when watching TV (1Seg).cFront cameradProximity sensor: Switches touch panel on and off to prevent from erroneous operation during a call.eEarpiecefLight sensor: Auto-control for display brightnessgInfrared data porthDisplay (Touch panel)iNotification LED: Notifies charging status, missed calls, mail reception.jPower key/Screen lock key:pkVolume key/Zoom key:mlCamera key: k(Activates the camera, works as a shutter when shooting.)mGPS Antenna*1nCameraoBluetooth®/Wi-Fi®/Built-in antenna*1pFlash/Photo lightqFeliCaTM markrau Micro IC Card (LTE)sBattery covertBattery packuSpeakervSecond microphone: Reduces noise to make easy to listen.wFeliCaTM/NFC antenna*1xmicroSD memory card slotyBuilt-in antenna*1zmicroUSB connection terminalADesktop Holder contact terminalBStrap holeCMicrophone*1 The antenna is built in. Covering around the antenna by the hand may affect the quality of call/communication.Attaching/Removing the battery packBefore attaching/removing the battery pack and battery cover, turn off the product. Do not attach the AC adapter.Use a dedicated battery pack and attach it properly.■Attaching the battery pack･Be sure to check the au Micro IC Card (LTE) is certainly attached and then attach the battery pack.1Insert a fingertip into the gap on the side of the battery cover and lift it up in the arrow direction ( ).2Align the terminals of the product with those of the battery pack and insert the battery pack in the direction of the arrow ( ).3Check the orientation of the battery cover and attach it to fit the product ( ). Push each tab to close firmly ( ).■Removing the battery pack1Remove the battery cover and put your fingertip in the concave on the product, then lift the battery pack in the direction of the arrow ( ).2Check the orientation of the battery cover and attach it to fit the product. Push each tab to close firmly.au Micro IC Card (LTE)Your phone number etc. is recorded in the au Micro IC Card (LTE).The product supports only with au Micro IC Card (LTE). You cannot use the product with an au IC-card switched from an au cell phone or au smartphone.Attaching/removing the au Micro IC Card (LTE)Before attaching/removing the au Micro IC Card (LTE), make sure to turn off the product and remove the battery cover and battery pack. Do not attach the AC adapter.■Attaching the au Micro IC Card (LTE)1Use your fingernail to pull the projection on the edge of the tray ( ), and slide the tray straight out.･XperiaTM UL(with battery cover)*1･Stereo Headset with Microphone (Sample)･Sony Mobile AC adapter 05 (EP880)*1<AC adapter>･Desktop Holder (SOL22PUA)*1･Battery pack (BA800)･1Seg antenna cable (EC220)<microUSB cable>*1 Including warranty･取扱説明書 (Instruction Manual) (Japanese)･XperiaTM ULのご利用にあたっての注意事項 (Cautions on using XperiaTM UL) (Japanese)･携帯電話機の比吸収率などについて(Radio Frequency (RF) exposure and Specific Absorption Rate (SAR)) (Japanese)･設定ガイド (Setting Guide) (Japanese)The following items are not included in the package.･microSD memory cardhjklicda be fgnomvwzAyxpqrsutB CIC (metal) partFront Backau Micro IC Card (LTE)2With the IC (metal) side facing down, insert the au Micro IC Card (LTE) into the tray while fitting direction of the notch, and press the tray all the way into the end.3Attach the battery pack and the battery cover, and press each tab to close firmly.■Removing au Micro IC Card (LTE)1Hook the projection on the edge of the tray with your fingernail and slide the tray straight out, then remove the au Micro IC Card (LTE).2Press the tray all the way into the end, and attach the battery pack and the battery cover, then press each tab to close firmly.❖Information･Note the following points, otherwise handling the au Micro IC Card (LTE) may cause malfunction or damage.･Do not to touch the IC (metal) part of the au Micro IC Card (LTE) or the IC card terminal inside the product.･Insert in the correct direction.･Do not use force to attach or remove.･Do not lose the au Micro IC Card (LTE) after it has been removed.Attaching/Removing microSD memory cardBefore attaching/removing the microSD memory card, make sure to turn off the product and remove the battery cover and the battery pack. Do not attach the AC adapter.■Attaching microSD memory card1Confirm the orientation of the microSD memory card and slowly insert it in the direction of the arrow.Insert the microSD memory card with contact side down.2Attach the battery pack and the battery cover, and press each tab to close firmly.❖Information･Insert a microSD memory card in the appropriate direction. Inserting a microSD memory card forcefully into the slot could result in failure to remove the microSD memory card or damage.■Removing microSD memory card1While pressing the microSD memory card with your fingertip, slide it out.2Attach the battery pack and the battery cover, and press each tab to close firmly.ChargingWhen you purchase your product, the battery pack is not fully charged. Make sure to charge the battery pack before use.❖Information･When the charging starts, notification LED turns in red/orange/green according to the battery level. Green LED indicates that the battery charge reaches 90 percent or more. To check the battery level, see the status bar in the top of the Home screen. Alternatively, from the Home screen, [ ] X [Settings]X[About phone]X [Status] and see "Battery level". When charging is complete, "100%" is shown.･When you start charging the battery with the product powered off, the power turns on even though operation is not available. Do not charge the battery in a place where the use is prohibited such as in airplane or hospital.･It may take longer to complete for charging with a PC or while using the camera function.■Charging with the AC adapter1Open the microUSB connection terminal cover of the product and insert the microUSB plug of the microUSB cable straight into the microUSB connection terminal of the product, with the USB symbol ( ) facing up.2Insert the USB plug of the microUSB cable straight into the microUSB connection terminal of the AC adapter. Then plug the AC adapter into the wall outlet.Notification LED lights.3When charging is complete, remove the microUSB plug of the microUSB cable from the product and close the microUSB connection terminal cover.4Remove the AC adapter from the outlet.■Charging with a PC1Open the microUSB connection terminal cover of the product and insert the microUSB plug of the microUSB cable straight into the microUSB connection terminal of the product, with the USB symbol ( ) facing up.2Insert the USB plug of the microUSB cable into the USB port of a PC.Notification LED lights.When a confirmation screen for installation of PC Companion software appears on the product, tap "Skip".When a screen for new hardware detection etc. appears on the PC, select "Cancel".3When charging is complete, remove the microUSB plug of the microUSB cable from the product and close the microUSB connection terminal cover.4Remove the USB plug of the microUSB cable from the USB port of the PC.* For charging, you cannot use the AC adapter and a PC simultaneously.❖Information･Installation of MTP driver to a PC is required to charge the battery with a Microsoft Windows XP PC, since "USB connection mode" is set to "Media transfer mode (MTP)" by default. Install Windows Media Player 10 or later to install MTP driver.■Charging with the Desktop Holder1Insert the microUSB plug of the microUSB cable straight into the microUSB connection terminal of the Desktop Holder, with the USB symbol ( ) facing up.2Insert the USB plug of the microUSB cable straight into the microUSB connection terminal of the AC adapter. Then plug the AC adapter into the wall outlet.3Place the product onto the Desktop Holder ( ) ( ).Notification LED lights.4When charging is complete, remove the product from the desktop holder and disconnect the AC adapter from the outlet.❖Information･You cannot charge the battery by connecting the Desktop Holder to a PC.Turning your terminal on (Initial settings)Turning the power on1p (over 1 sec)The unlock screen appears.2Drag " " (left) to " " (right)■Turning the power off1p (over 1 sec)2[Power off]X[OK]Initial settingsThe first time the product turns ON, the initial setting screen appears automatically. Follow the onscreen instructions to set Language, each function, service, etc. For details, refer to "Setting Guide".❖Information･Setup items can be set or changed later as required. To make the settings later, from the Home screen, [ ]X[Settings]X [Language & input]X[Language], or from the Home screen, []X[Settings]X[Setup guide], or [ ]X[au Easy Setting].microSD memory cardbcdefijklmghpqrstnoaSOL22_Torisetu.fm Page 1 Tuesday, March 26, 2013 4:42 PM](https://usermanual.wiki/Sony/PM-0400.User-Guide-StartGuide/User-Guide-1963821-Page-1.png)
![For inquiries, call: Customer Service CenterFor general information and charges (toll free)For loss or theft and operation information (toll free)In case above numbers are not available, (toll free) 0120-977-033 (except Okinawa) 0120-977-699 (Okinawa)From au cell phones:113 without area codeFrom fixed-line phones: 0077-7-113From fixed-line phones: 0077-7-111From au cell phones:157 without area codeSold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANYManufactured by: Sony Mobile Communications Japan, IncSeptember 2012, 1st Edition1268-7227.1Cell phone and PHS operators collect and recycle unused telephones, batteries and battery chargers at stores bearing the logo regardless of brand and manufacturer to protect the environment and reuse valuable resources.Secure cell phone support centerFor loss, theft, damage.From a land-line phone/an au cell phone,0120-925-919 (toll-free)Business hours 9:00−21:00 (7 days a week)Gaga/KDDI/Start guideScreen LockWhen the screen lock is set, the screen light turns off to avoid the keys or touch panel from false operations.･When the specified time elapses, the product screen light turns off and screen lock is activated.1While the screen is displayed, p■Unlocking screenThe unlocking screen appears when turning the power on or the backlight on by pressing p.1Drag " " (left) to " " (right).❖Information･Drag (right) to (left) to activate the camera to shoot without unlocking the screen.Basic OperationKey iconsThe followings are the main functions of x, y, r keys located at the bottom of the screen.Using the touch panelThe display on the product is a touch panel operated by touching it with your finger.■Tap/Double-tapTap: Gently touch a screen and then immediately release your finger. Double tap: Tap the same position twice.■Long-touchKeep touching an item with your finger.■SlideWhile your finger is gently touching the screen, trace it to the desired direction to move over.■FlickOperate the screen by quickly moving (flicking) your finger up, down, right, or left.■PinchTouch the screen with two fingers and widen (pinchout) or narrow (pinch-in) the fingers' distance.■DragKeep touching an item or icon, trace it to the desired direction to move.Home screenHome screen consists of multiple screens. Slide/flick left or right to switch them. The center screen is the default screen to operate. Tap y to return to the Home screen any time.aHome screen positionIndicates which screen of the five home screens you are in.bWidgetcWallpaperdMedia folders (WALKMAN, Movies, Album, Camera, Music Unlimited, Video Unlimited, FM radio)eShortcuts (Applications)fau folders (auスマートパス (au Smart Pass), E-mail, SMS, Friends Note, Uta Pass, Video Pass, LISMO Book Store, おはなしアシスタント (Talk Assist), LINE, LISMO Player, auお客さまサポート (au Customer Support), au災害対策 (au Disaster Countermeasure))gApplication keyAdding to Home screen/Editing Home screenYou can change wallpaper or theme of the Home screen and add/delete/move shortcuts of applications, widgets or folders on the Home screen.1Tap an area of the Home screen where no icons are displayed.An icon appears at the top of the screen.■Adding a folder1From the Home screen, long-touch an icon.2Drag the icon onto another icon then release your finger.3Enter a folder nameu[Done]■Deleting shortcuts/widgets/folders1From the Home screen, long-touch an icon to delete. appears at the bottom of the screen.2Drag the icon to " " then release your finger.To delete a folder, tap "Delete" after Step 2. Shortcuts etc. in the folder are also deleted.❖Information･Long-touch a shortcut, widget, or folder icon to move.Using the Applications screenYou can call up functions from the Applications screen. Application icons installed to the product are also displayed.■Starting an applicationWhen you tap application icons to use respective functions, you may incur communication charges depending on the function.1From the Home screen, [ ]The Applications screen appears. Slide/Flick left or right to switch the Applications screen.2Tap an application to use.■Main applications■Downloading applicationsYou can download applications such as convenient tools and games from the Google Play and install them to use on the product.･To use Google Play, you need to set a Google account. For details, refer to "Setting Guide".■Deleting (uninstalling) applicationsBefore deleting installed applications, back up contents related to the application that you want to save including data saved in the application.❖Information･Some applications may not be deleted.Knowing the status of the product■Status barThe status bar is located at the top of the product screen. On the left of the status bar, notification icons appears to inform missed calls, new mail, operations in progress, etc., and on the right, status icons appear to indicate the status of the product.■Examples of notification icon■Main status icons■Notification panelIf any notification icons are displayed, slide down the status bar to open the Notification panel. You can check details of notification icons or start corresponding applications.xx y rxBackReturn to the previous screen. Close a dialog box, menu, the Notifications panel or keyboard.yHomeDisplay the Home screen.rRecently used applicationsRecently used applications appear on a list. Tap a thumbnail to activate or flick left or right to delete from the list.Slide PinchFlickabfcdegee2 Wallpaper Select an image from Album/Live wallpapers/XperiaTM wallpapers to replace wallpaper.Theme Set background image for the Home screen or settings screen.Shortcuts Add a shortcut of application etc.Widgets Select a widget to add from the list./ Phone/Contacts Play Store/ E-mail/SMS / Camera/AlbumBrowser MapsSettings Search/Alarm & clock/CalendarInstruction ManualNew Gmail messageNew PC mail messageNew E mail (∼@ezweb.ne.jp) messageNew SMS/Receiving notification service message/New Receiving notificationTalking/Calling/ReceivingMissed callGreen Heat energy saving icon (Remove the AC adapter from the power outlet)USB connectingReceiving/Downloading data/ Signal level (Level 4/Out of service area)/ Data communication status (LTE available/3G available)/ Battery level (100%/Charging)/ Silent mode (Vibrate/Mute)Airplane mode is activated.❖Information･When you set screen lock to "Slide", slide the status bar downward to check the Notification panel without unlocking the screen.■Notification LEDNotification LED informs charging prompt, battery level while charging, missed calls, mail arrival, etc. by turning on or flashing.❖Information･When the remaining battery is not sufficient for turning the product ON, pressing p makes LED flash red.■Checking own phone number1From the Home screen, [ ]X[Settings].2[About phone]X[Status].The phone number of the product is shown under "My phone number".❖Information･Alternatively, from the Home screen, tap [ ] X[Contacts]X [Myself] to check your phone number.■Setting the Silent ModeSet the ringtone volume to 0. Note that setting the product to Silent mode does not mute sounds for shutter, playback of video or music, alarm, etc. And volume up for ringtone or notification tone cancels Silent mode.1p (over 1 sec)2[]/[]Tap " " to set mute (ringtone volume 0) and tap " " to set vibrator.❖Information･Alternatively, from the Home screen, []u[Settings]u[Sound]u[Silent mode]u[Off]/[Vibrate]/[Mute] to switch the Silent mode on or off.■Setting Airplane modeWhen airplane mode is set, all wireless functions (phone, packet communication, Wi-Fi®, Bluetooth® function, NFC R/W P2P function) are turned off.1p (over 1 sec.) u[Airplane mode]❖Information･Alternatively, from the Home screen, []u[Settings]u[More...]uMark/Unmark [Airplane mode] to switch the airplane mode on/off.Entering charactersWhen entering characters, use the software keyboard displayed when tapping a character input box for adding contacts, creating a message, etc.■Switching keyboardsTo input Japanese, use "Xperia Japanese keyboard" switching four input types of "Phonepad", "QWERTY keyboard", "Japanese syllabary", "Kana handwriting".1Tap a character input box.2Long-touch " "X[]/[]/[]/[].The keyboard switches to Phonepad/QWERTY keyboard/Japanese syllabary/Kana handwriting.❖Information･Word suggestions or direct conversion candidates for the entered characters appear. Tap a word to enter.･Tap " " to delete the character before the cursor.･Long-touch " " to enter symbols (single byte/double byte), facemarks from the displayed list.･On the Phonepad, you can enter characters by flicking a key up/down/left/right besides repeatedly tapping the key (toggle input).･Ta p x to stop entering characters and return to the previous screen.SupportIntroduction of related accessoriesFor details, refer to the instruction manual for each device.･Battery pack (BA800)･Sony Mobile AC adapter 05 (EP880)･Desktop Holder (DK25)･1Seg antenna (EC220)･Common AC Adapter 04 (0401PWA) (sold separately)･au Carrying Case F Black (0105FCA) (sold separately)❖Information･For the latest information on accessories, visit the au homepage (http://www.au.kddi.com/) or contact the Customer Service Center.･Accessories described on this page can be purchased from the au Online Shop.http://auonlineshop.kddi.com/TroubleshootingBefore you assume that the product is malfunctioning, check the following:For more details, visit au Customer Support site of au homepage.http://cs.kddi.com/support/komatta/kosho/index.htmlUpdating SoftwareYou can update the product to the most recent software for optimal performance and to get the latest enhancements.･You are charged for data communication when connecting to the Internet from the product using packet communication.･You are recommended to back up your data before updating software.･For details, visit http://www.sonymobile.co.jp/support/ or refer to the "Instruction Manual" (Japanese) application or "取扱説明書詳細版 (Full instruction manual)" (Japanese) available on au homepage.Status DescriptionRed The battery is charging when the remaining battery level is 14% or lower.Orange The battery is charging when the remaining battery level is 15% - 89%.Green The battery is charging when the remaining battery level is 90 % or higher.Flashing red The battery is charging when the remaining battery level is 14% or lower.Flashing green New Gmail, new PC mail or new SMS arrives while backlight is off.Flashing blue New mail arrives while the backlight turns off.《QWERTY keyboard》《Phonepad》《Japanese syllabary keyboard》《Kana handwriting》Symptom What you should checkPower is not turned on even though p is pressed.Is the battery pack charged?Is p pressed for over 1 second?The power goes off Is the battery running out?The power turns off while activation screen is displayed.Is the battery running out?(Out of service area) appears.Is the product out of the service area or in an area where the signal is weak?Is the built-in antenna covered with finger etc.?Cannot charge the battery pack (Notification LED does not light, the battery icon does not change into charging).Is the power plug of the AC adapter surely inserted into the outlet?Is the battery pack attached properly?Is the microUSB plug of the microUSB cable surely inserted into the product?Charging is not complete.Is the temperature of the product raised or very low?Cannot operate touch panel as intended.Are you operating with gloved hands?Are you operating with a fingernail or foreign object on the screen?Cannot operate key/touch panel.Is the power turned on?Is "Screen lock" set?Turn off the power and then turn it on again.Screen response is slow when you tap on the screen/press the keys.Screen response may be slowed down when a large amount of data is stored in the product or being transmitted between the product and a microSD memory card.A message such as charge the battery appears.The battery is almost dead.Battery usage time is short.Is the battery pack fully charged? Charge until the notification LED turns green.Is the battery pack end-of-life?Is the product used for a long period at places where (out of range) appears?The display backlight turns off in a short while.Is set "Sleep" period too short? Set the screen to light longer.Symptom What you should checkDisplay is dark. Is “Brightness” set to dark?Is the proximity sensor covered by sticker?Cannot hear sound while watching 1Seg.Is Stereo Headset with Microphone (Sample) unplugged from the 1Seg antenna cable while watching 1Seg using Stereo Headset with Microphone (Sample)? Reconnect the 1Seg antenna cable.Cannot recognize a microSD memory card.Is the microSD memory card inserted properly?Is the microSD memory card unmounted?Symptom What you should check■Downloading and updating softwareUpdate files can be downloaded from the Internet web site via wireless communication into the product directly.･To download software updates only via Wi-Fi®, from the Home screen, [ ]X[Update Center]X[]X[Settings]X[Preferred data traffic] and select [Via Wi-Fi only]. If you set to [Via mobile network/Wi-Fi] for updating, note that when Wi-Fi® communication becomes unstable, packet communication takes the place automatically, which may apply communication fees.1From the Home screen, [ ]X[Update Center].2[System]X[].■Connecting to a PC for updating softwareYou can update software using PC Companion to be installed from the product.･Install PC Companion to your PC beforehand.After-sales service■When asking for repairFor repair, contact Secure cell phone support center.❖Information･Before handing in the product for repair, make a backup of the contents of memory since they may disappear during repair. Note that the Company shall not be liable for any damages and loss of income should the contents of memory be altered or lost.･Recycled parts that meet the Company's quality standards are sometimes used for repair.･Collected au cell phones by Replacement cell phone delivery service which you used before are recycled to cell phones for replacement after repairs. Also replaced parts by au after-sales service are collected and recycled by KDDI. They are not returned to customers.■Performance parts for repairThe Company retains performance parts for repair of the XperiaTM UL main unit and its peripherals for six years after discontinuation of production. "Performance parts for repair" refers to parts required for maintaining the functions of the product.■Warranty cardAt the store of purchase, thoroughly check and read the name of the retailer, date of purchase and other necessary details filled in on the warranty card, and be sure to keep it in a safe place.■Secure cell phone support plusAn after-sales service membership program on a monthly basis called "Secure cell phone support plus" (monthly fee: 399 yen including tax) is available for using your au cell phone for a long time without worries. This service expands coverage for many troubles including malfunction, theft and loss. For details of this service, refer to au homepage or contact Secure cell phone support center.❖Information･You can apply for membership only at the time of purchasing your au cell phone.･Once you cancel the membership, you cannot reapply for it until you purchase an au cell phone next time.･Note that when changing the model or purchasing an extra cell phone, this service only covers the most recently purchased au cell phone.･When an au cell phone is handed over to you or someone else, the Secure cell phone support plus membership is also handed over to the successor of the cell phone.･When you get a new au cell phone by changing the model or purchasing an extra cell phone, the "Secure cell phone support plus" membership for the old au cell phone is automatically canceled.･Service contents are subject to change without notice.■au Micro IC Card (LTE)The au Micro IC Card (LTE) is lent to you by au. In case of loss or damage, the card will be replaced at your expense. When malfunction is suspected, or in case of theft or loss, contact an au shop or PiPit.■After-sales serviceIf you are unsure about anything regarding after-sales service, contact the following service contact.Customer Service Center (for service canceling procedure or operation in case of loss or theft)From a land-line phone, 0077-7-113 (toll-free)From an au cell phone, 113 without area code (toll free)Secure cell phone support center (for loss, theft, damage) From a land-line phone/From an au cell phone,0120-925-919 (toll free)Business hours 9:00 – 21:00 (7 days a week)■au after-sales service informationReplacement cell phone delivery serviceSecure cell phone support plus membersNon-Secure cell phone support plus membersHolding over and repairSecure cell phone support plus membersNon-Secure cell phone support plus members* Charge amounts are all tax-included.❖InformationReplacement cell phone delivery service･When you have trouble with your au cell phone, replacement cell phone (same model, same color, including new battery) is delivered by calling to. Return your damaged cell phone within 14 days after replacement cell phone is delivered.･Available up to twice in a year from the day you use this service as a start day. If you do not use this service in the past year at the subscription to this service, it will be 1st and if you use, it will be 2nd.* For details, refer to au homepage.Holding over and repair ･Repairs due to water soak and irreparable damage are not covered by this service. ･Damages and malfunctions intentionally caused by the customer as well as those due to modification (e.g. disassembly, change of parts, painting, etc.) by the customer are not covered by this service.･You cannot receive a refund for replacement of the outer casing due to stains, scratches, paint removal, etc. on the outer casing.Main specifications❖Information･The continuous talk time, continuous standby time and continuous 1Seg viewing time may drop to less than half depending on the battery charging status, usage environment such as temperature, reception condition at the location where the product is used, and the function settings.During the warranty periodRepairs will be done based on the terms of services of the free-of-charge repair warranty described on the warranty card.Outside the warranty periodWe shall repair the product for a charge as requested by the customer if repair renders it usable.Spontaneous failure 1st Free of chargeSpontaneous failure 2nd Customer charge1st: 5,250 yen2nd: 8,400 yenPartially damage, water soak, irreparable damage, theft or lossSpontaneous failure 1st No recompenseSpontaneous failure 2ndPartially damage, water soak, irreparable damage, theft or lossSpontaneous failure 1st Free of chargeSpontaneous failure 2nd Free of charge (three-year warranty)Partially damage Customer chargeUpper limit: 5,250 yenWater soak, irreparable damageNo recompenseTheft, lossSpontaneous failure 1st Free of chargeSpontaneous failure 2nd Actual costPartially damageWater soak, irreparable damageNo recompense(model change)Theft, lossDisplay Approx. 4.3 inches TFT 16,777,216 colors720 × 1,280 dotsWeight Approx. 120 g (with battery pack)Dimension (W × H × D) Approx. 65mm × 129mm × 8.7mm (thickest part 10.9mm)Continuous call timeIn Japan Approx. 700 minutesOverseas (GSM)Approx. 470 minutesContinuous stand-by timeIn Japan Approx. 320 hours (LTE)Approx. 490 hours (3G)Overseas (GSM)Approx. 440 hoursContinuous charging time (Sony Mobile AC adapter 05)Approx. 130 minutes1Seg viewing time Approx. 270 minuteswxyzADEFGHBCJKLMNuvISOL22_Torisetu.fm Page 2 Tuesday, March 26, 2013 4:42 PM](https://usermanual.wiki/Sony/PM-0400.User-Guide-StartGuide/User-Guide-1963821-Page-2.png)