Sony PM-0700 Cellular/ PCS GSM/ EDGE/ WCDMA Phone with WLAN, Bluetooth, RFID and ANT+ User Manual Sony Ericsson Mobile Communications AB

Sony Mobile Communications Inc Cellular/ PCS GSM/ EDGE/ WCDMA Phone with WLAN, Bluetooth, RFID and ANT+ Sony Ericsson Mobile Communications AB

Contents

Users Nanual Info

SAR InformationFCC StatementDeclaration of ConformitySony SOL24
Important InformationUnited States & CanadaTHIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCEWITH THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURETO RADIO WAVES.The SOL24 Series mobile phones have been designed tocomply with applicable safety requirements for exposure toradio waves. Your wireless phone is a radio transmitter andreceiver. It is designed to not exceed the limits* of exposure toradio frequency (RF) energy set by governmental authorities.These limits establish permitted levels of RF energy for thegeneral population. The guidelines are based on standardsthat were developed by international scientific organizationsthrough periodic and thorough evaluation of scientific studies.The standards include a safety margin designed to assure thesafety of all individuals, regardless of age and health.The radio wave exposure guidelines employ a unit ofmeasurement known as the Specific Absorption Rate (SAR).Tests for SAR are conducted using standardized methods withthe phone transmitting at its highest certified power level in allused frequency bands. While there may be differencesbetween the SAR levels of various phone models, they are alldesigned to meet the relevant guidelines for exposure to radiowaves. For more information on SAR, please refer to theImportant Information chapter in the User Guide.The highest SAR value as reported to the authorities for thisphone model when tested for use by the ear is 1.111 W/kg*,and when worn on the body is 1.054 W/kg*. For body-wornoperation, the phone has been tested when positioned aminimum of 15 mm from the body without any metal parts inthe vicinity of the phone or when properly used with anappropriate accessory and worn on the body. For deviceswhich include “WiFi hotspot” functionality, SAR measurementsfor the device operating in WiFi hotspot mode were takenusing a separation distance of 10 mm. Use of third-party2
accessories may result in different SAR levels than thosereported.**Before a phone model is available for sale to the public inthe US, it must be tested and certified by the FederalCommunications Commission (FCC) that it does not exceedthe limit established by the government-adopted requirementfor safe exposure*. The tests are performed in positions andlocations (i.e., by the ear and worn on the body) as required bythe FCC for each model. The FCC has granted an EquipmentAuthorization for this phone model with all reported SAR levelsevaluated as in compliance with the FCC RF exposureguidelines. While there may be differences between the SARlevels of various phones, all mobile phones granted an FCCequipment authorization meet the government requirement forsafe exposure. SAR information on this phone model is on fileat the FCC and can be found under the Display Grant sectionof http://transition.fcc.gov/oet/ea/fccid after searching on FCCID PY7PM-0700. Additional information on SAR can be foundon the Mobile Manufacturers Forum EMF website athttp://www.emfexplained.info/.* In the United States and Canada, the SAR limit for mobilephones used by the public is 1.6 watts/kilogram (W/kg)averaged over one gram of tissue. The standard incorporates amargin of safety to give additional protection for the public andto account for any variations in measurements.**This paragraph is only applicable to authorities andcustomers in the United States.3
FCC StatementThis device complies with Part 15 of the FCC rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) This device must accept any interference received,including interference that may cause undesired operation.Any change or modification not expressly approved by Sonymay void the user's authority to operate the equipment.This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment andreceiver.•Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician forhelp.10
Declaration of Conformity for SOL24 We, Sony Mobile Communications AB ofNya VattentornetSE-221 88 Lund, Swedendeclare under our sole responsibility that our productSony type PM-0700-BVand in combination with our accessories, to which thisdeclaration relates is in conformity with the appropriatestandards EN 301 511:V9.0.2, EN 301 489-7:V1.3.1, EN 301 908-1:V5.2.1, EN 301 908-2:V5.2.1, EN 301 893:V1.7.1, EN 301 908-13:V5.2.1, EN 301 489-24:V1.5.1, EN 300 440-2:V1.4.1, EN 301 489-3:V1.4.1, EN 300 328:V1.8.1, EN 301 489-17:V2.2.1,EN 302 291-2:V1.1.1, EN 62 209-1:2006, EN 62 209-2:2010 andEN 60 950-1:2006+A11:2009+A1:2010+A12:2011 following the provisions of, Radio Equipment and TelecommunicationTerminal Equipment directive 1999/5/EC.Lund, November 2013Pär Thuresson,Quality Officer, SVP, Quality & Customer Services18
www.sonymobile.comSony Mobile Communications ABSE-221 88 Lund, Sweden

Navigation menu