Sony PM-0800 Quad GSM/WCDMA/LTE cellular mobile telephone with BT, WLAN, Ant+, RF ID and HAC User Manual Sony Mobile Communications AB

Sony Mobile Communications Inc Quad GSM/WCDMA/LTE cellular mobile telephone with BT, WLAN, Ant+, RF ID and HAC Sony Mobile Communications AB

User Manual 1

Important InformationBefore you use your device, please read the ImportantInformation provided in your device regarding warranty,safety and handling information.Protecting your device from waterand dustYour device has IP (Ingress Protection) ratings of IP65 andIP68. These ratings mean that your device is dust tight andis protected against low pressure water stream as well asagainst the effects of submersion for 30 minutes in fresh(non-saline) water up to 1.5 metres deep.Always firmly attach all covers to ensure the water and dustresistance of the device. If liquid is detected inside thedevice, for example, underneath one of the covers, yourwarranty will be void.Before using your device in water and in dusty conditions,refer to the relevant section of the User guide for yourdevice for more detailed information. An online User guideas well as a downloadable version is available atwww.sonymobile.com/support.Overview21 43 5 67891011 12 14131618191715 1. Charging/Notificationlight2. Headset jack3. Second microphone4. Proximity/Light sensor5. Ear speaker/Secondspeaker6. Front camera lens7. Cover for nano SIMand memory card slot8. Power key9. Volume/Zoom key10. Camera key11.Main microphone/Speaker12. Main camera lens13. Camera light14. GPS antenna area15. Wi-Fi/Bluetooth antennaarea16. Cover for charger/USBcable port17. NFC™ detection area18. Charging dock connector19. Strap holeAssemblyYour device only supports nano SIM cards.Make sure you insert the nano SIM card into the nano SIMcard holder before inserting it into the device. Also, don’tconfuse the nano SIM card slot with the memory card slot.To insert the nano SIM cardIf you insert the nano SIM card while the device ispowered on, the device restarts automatically.1Detach the cover for the nano SIM card holder.2Using a fingernail or other similar object, drag out the nanoSIM card holder.3Place the nano SIM card in the nano SIM card holder, thenreinsert the holder.4Re-attach the cover.Make sure you reinsert the nano SIM card holder in thecorrect orientation. When you drag the holder out to insertthe nano SIM card, do not turn the holder around.To insert the memory card1Remove the memory card slot cover.2With the gold coloured contacts facing down, insert thememory card into the memory card slot, then re-attach thememory card slot cover.BasicsTurning on the deviceMake sure that the battery is charged for at least 30 minutesbefore you turn on the device for the first time.To turn on the deviceMake sure that the battery is charged for at least 30minutes before you turn on the device for the first time.1Press and hold down the power key until the devicevibrates.2Wait a while for the device to start.Waking up the screenTo activate the screen•Briefly press the power key .•If Tap to wake up mode is enabled, double-tap the screen.To enable Tap to wake up mode, go to the Home screen,then tap > Settings > Display > Tap to wake up.Setting up your deviceSetup guideThe first time you start your device, a setup guide opens tohelp you configure basic settings, sign in to some accounts(for example, your Google™ account), and personalise yourdevice. You can also manually access the setup guide at alater stage.To access the setup guide manually1From the Home screen, tap .2Tap > Setup guide.Accessing settingsView and change settings for your device from the Settingsmenu. The Settings menu is accessible from both theApplication screen and the Quick settings panel.To access your device settings1From your Home screen, tap .2Find and tap .Transferring your contactsXperia™ Transfer is an application within the PC Companionand the Sony Bridge for Mac computer programs that helpsyou to collect contacts from your old device and transferthem to your new device. Xperia™ Transfer supports severaldevice brands, including iPhone, Samsung, HTC, BlackBerry,LG, and Nokia.You need:•An Internet-connected computer.•A USB cable for your old device.•A USB cable for your new Android™ device.•Your old device.•Your new Android™ device.To transfer contacts to your new device1Search and download PC Companion (on a PC) or Bridgefor Mac (on a Mac computer) from www.sonymobile.com ifthe application is not already installed.2After successful installation, open the PC Companionapplication or the Sony Bridge for Mac application, thenclick Xperia™ Transfer and follow the relevant instructionsto transfer your contacts.Finding your wayUsing the keysBack navigation key•Go back to the previous screen within anapplication or close the application.Home navigation key•Exit an application and go back to the Homescreen.Task navigation key•Open the recently used applications window andthe small apps bar.Application screen•Open the Application screen.Basic applications and settingsMake phone calls by dialling the number manually or byusing the smart dial function.Use the Messaging application to send and receive textand multimedia messages.Go to Google Play™ to download free and paidapplications for your device.Optimise the device settings to suit your ownrequirements.Status and notificationsTo open or close the Notification panelDrag down two fingers instead of one to open the Quicksettings panel instead.Support on the webVisit www.sonymobile.com/support to access a range ofsupport options for your device, including downloads,troubleshooting tips and a User guide.Legal informationSony D6603/D6653/xxxxPublication number: xxxx-xxxx.1This Startup guide is published by Sony MobileCommunications Inc. or its local affiliated company, withoutany warranty. Improvements and changes to this Startupguide necessitated by typographical errors, inaccuracies ofcurrent information, or improvements to programs and/orequipment, may be made by Sony Mobile CommunicationsInc. at any time and without notice. Such changes will,however, be incorporated into new editions of this Startupguide. All illustrations are for illustration only and may notaccurately depict the actual device.See regulatory information such as the CE mark in therelevant label tray in the device.All product and company names mentioned herein are thetrademarks or registered trademarks of their respectiveowners. Any rights not expressly granted herein are reserved.Visit www.sonymobile.com/us/legal/ for more information.Product compliance: This product has been manufactured byor on behalf of Sony Mobile Communications Inc., 1-8-15Konan, Minato-ku, Tokyo 108-0075, Japan. Inquiries relatedto product compliance based on national legislation shall beaddressed to Sony Mobile Quality Officer, Sony MobileCommunications Inc., 1-8-15 Konan, Minato-ku, Tokyo108-0075, Japan. For any service or guarantee matters,please refer to the contact details provided in the separateservice or guarantee documents.© 2014 Sony Mobile Communications Inc. All rights reserved.To view the CE mark and the FCC ID1Detach the cover of the SD card slot.2Using a fine-tipped pen or other similar tool, press thememory card inwards and then release it quickly.3Draw the memory card outwards and remove it fully.4Insert a fingernail, or a sharp object such as a pen, into thehole in the label tray, then drag the tray outwards. Theinformation is displayed on the tray.
Startup guideXperia™ XD6603/D6653/xxxxSony Mobile Communications ABSE-221 88 Lund, Swedenwww.sonymobile.com

Navigation menu