Sony PM0875 PDA Phone User Manual Sony Mobile Communications AB

Sony Mobile Communications Inc PDA Phone Sony Mobile Communications AB

TempConfidential_[STC]Holly SS StartUp Guide

Support for youHelp is never far away. You can access our supportwebsite and a range of help options directly in your deviceusing the Support application. Or you can visitsupport.sonymobile.com from any supported browser.The support options on our website include downloads,troubleshooting tips, User guides, support numbers, andchat and email support. You can access support contactinformation for your country or region using the Contact uslinks.If you don’t have a network connection, you can stillaccess support contact information such as phonenumbers and email addresses in your device. Just openthe Support application and select the Contact usoption near the top of the screen.To access the Support application1From your Home screen, tap .2Find and tap .Overview2341561 Charging/Notification light2 Power key3 Volume/Zoom key4 Camera key5 Charger/USB cable port6 Nano SIM/Memory card slot coverTo insert a memory card1Insert a fingernail into the gap between the top of thememory card slot cover and the device, then open thecover.2Press the button next to the memory card slot (asillustrated) using the tip of a paper clip or other similarobject with a long, fine tip, then drag out the memory cardholder that pops out.3Place the memory card in the holder, then re-insert theholder.4Close the cover.Make sure you insert the memory card in the correctorientation.To insert the nano SIM cardYour device only supports nano SIM cards. Make sure youuse the nano SIM card holder and don’t confuse the nanoSIM card slot with the memory card slot.1Insert a fingernail into the gap between the top of the nanoSIM card slot cover and the device, then open the cover.2Press the button next to the nano SIM card slot (asillustrated) using the tip of a paper clip or other similarobject with a long, fine tip, then drag out the nano SIMcard holder that pops out.3Place the nano SIM card in the holder, then re-insert theholder.4Close the cover.If you insert a nano SIM card while the device is poweredon, the device restarts automatically.To turn on the device1Make sure your device is charged for at least 30 minutesbefore you turn it on for the first time.2Press and hold down the power key until the devicevibrates.3Wait a while for the device to start.To activate the screen•Briefly press the power key .Starting upThe first time you start your device, a Setup guide opens tohelp you configure basic settings, personalise your deviceand sign in to some accounts, for example, your Google™account. The Setup guide can also be accessed later fromthe Settings menu.Important InformationBefore you use your device, please read the Importantinformation provided in the Setup guide in your device. Fromhere, you can find legal information as well as warranty,safety and SAR information.Transferring contacts and othercontentIf you need help to find and transfer contacts, messages,photos and other data from an old device to your new device,we recommend that you use the Xperia™ Transferapplication. Visit www.sonymobile.com/xperiatransfer formore information.Dust and water protectionYour device is waterproof and protected against dust as longas you follow a few simple instructions: make sure all portsand attached covers are firmly closed; don´t take the devicedeeper than 1.5m in water and for longer than 30 minutes;and only use it in fresh water.Casual use in chlorinated pools is permitted provided thedevice is rinsed in fresh water afterwards. Do not expose it toseawater or saltwater pools. Abuse and improper use of thedevice will invalidate the warranty.Your device has an Ingress Protection rating of IP65 andIP68. To see what this means and for more information, visitwww.sonymobile.com/durability.After using your device in water, it’s important that theUSB port is completely dry before a USB cable is insertedinto it. To remove moisture from the USB port, shake yourdevice several times with the USB port facing downwardsand then use a micro-fibre cloth to wipe the device dry. Ifmoisture is still visible in the USB port, repeat the shakingand drying procedure.Learn moreYou are now ready to start using your new device. To learnmore about your device and its full functionality, access oursupport website directly in your device using the Supportapplication or by visiting support.sonymobile.com.Frequency bands and model infoBelow is the model number and supported frequency bandsfor your device. You can find your model number underSettings > About phone.E5603UMTS HSPA Band 1 2 5 8 GSM GPRS/EDGE850/900/1800/1900 LTE Band 1 3 5 7 8 20E5606UMTS HSPA Band 1 2 4 5 8 GSM GPRS/EDGE850/900/1800/1900 LTE Band 2 4 5 7 12 13 17 28E5653UMTS HSPA Band 1 2 5 8 GSM GPRS/EDGE850/900/1800/1900 FDD LTE Band 1 3 5 7 8 20 28 TDD LTEBand 40Some frequency bands might be turned off in certainmarkets or by certain operators.Legal informationSony E5303/E5606/E5653Publication number: 1284-9581.2This Startup guide is published by Sony Mobile Communications Inc. or its local affiliated company, withoutany warranty. Improvements and changes to this Startup guide necessitated by typographical errors,inaccuracies of current information, or improvements to programs and/or equipment, may be made bySony Mobile Communications Inc. at any time and without notice. Such changes will, however, beincorporated into new editions of this Startup guide. All illustrations are for illustration only and may notaccurately depict the actual device.See regulatory information such as the device CE mark in the relevant label tray in the device.All product and company names mentioned herein are the trademarks or registered trademarks of theirrespective owners. Any rights not expressly granted herein are reserved. Visit www.sonymobile.com/global-en/legal/ for more information.Product compliance: This product has been manufactured by or on behalf of Sony Mobile CommunicationsInc., 1-8-15 Konan, Minato-ku, Tokyo 108-0075, Japan. Inquiries related to product compliance based onnational legislation shall be addressed to Sony Mobile Quality Office, Sony Mobile Communications Inc.,1-8-15 Konan, Minato-ku, Tokyo 108-0075, Japan. Should your device need warranty service, please returnit to the dealer from whom it was purchased or visit support.sonymobile.com/contact to contact your localSony Mobile repair partner (national rates may apply).© 2015 Sony Mobile Communications Inc. All rights reserved.To view the CE mark and the FCC ID1Insert a fingernail into the gap between the top of thememory card slot cover and the device, then open thecover.2Press the button above the nano SIM card slot using thetip of a paper clip or other similar object with a long, finetip, then drag out the nao SIM card holder that pops out.3Using the same tool as described above, drag out the labeltray in the nano SIM card slot. The CE mark is nowviewable.4To view the FCC ID, turn the device over. The FCC ID isdisplayed on the other side of the label.If a SIM card is inserted in the device, the device restartsautomatically when you drag out the nano SIM cardholder.To view the regulatory compliance mark•Open the phone dialer, then enter *#07#.Startup guideXperia™ M5E5303/E5606/E5653Sony Mobile Communications Inc.1-8-15 Konan, Minato-ku, Tokyo 108-0075, Japan1284-9581.2

Navigation menu