Sony Bravia 4 115 568 121 Users Manual KDL 40EX1/KDL 46EX1/KDL 52EX1

4-115-568-12 to the manual 55872775-6f3b-4c91-aa42-58e61e553661

2015-01-24

: Sony Sony-Bravia-4-115-568-121-Users-Manual-292065 sony-bravia-4-115-568-121-users-manual-292065 sony pdf

Open the PDF directly: View PDF .
Page Count: 52

Printed in Spain

4-115-568-12(1)

For useful information about Sony products

KDL-52EX1/KDL-46EX1/KDL-40EX1

4-115-568-12(1)

KDL-52EX1/KDL-46EX1/KDL-40EX1

4-115-568-12(1)

LCD Digital Colour TV

Operating Instructions

KDL-52EX1

KDL-46EX1

KDL-40EX1

2 GB

NOTICE FOR CUSTOMERS

IN THE UNITED KINGDOM

A moulded plug complying with BS1363 is fitted to this equipment

for your safety and convenience.

Should the fuse in the plug supplied need to be replaced with the

same rating of fuse approved by ASTA or BSI to BS 1362 (i.e.,

marked with or ) must be used.

When an alternative type of plug is used it should be fitted with the

same rating of fuse, otherwise the circuit should be protected by a

13 AMP FUSE at the distribution board.

If the plug supplied with this equipment has a detachable fuse cover,

be sure to attach the fuse cover after you change the fuse. Never use

the plug without the fuse cover. If you should lose the fuse cover,

please contact your nearest Sony service station.

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace

the fuse.

Please refer to the illustration that actually equipped with the

product.

Introduction

Thank you for choosing this Sony product.

Before operating the TV, please read this manual thoroughly and

retain it for future reference.

Notice for Digital TV function

sAny functions related to Digital TV ( ) will only work in

countries or areas where DVB-T (MPEG-2 and H.264/MPEG-4

AVC) digital terrestrial signals are broadcast or where you have

access to a compatible DVB-C (MPEG-2 and H.264/MPEG-4

AVC) cable service. Please confirm with your local dealer if

you can receive a DVB-T signal where you live or ask your

cable provider if their DVB-C cable service is suitable for

integrated operation with this TV.

sThe cable provider may charge an additional fee for such a

service and you may be required to agree to their terms and

conditions of business.

sAlthough this TV set follows DVB-T and DVB-C

specifications, compatibility with future DVB-T digital

terrestrial and DVB-C digital cable broadcasts cannot be

guaranteed.

sSome Digital TV functions may not be available in some

countries/regions and DVB-C cable may not operate correctly

with all providers.

sFor more information about DVB-C functionality please see

our cable support site:

http://support.sony-europe.com/TV/DVBC/

Notice for Wireless Signal

1. Hereby, Sony, declares that this unit is in compliance with the

essential requirements and other relevant provisions of Directive

1999/5/EC.

To obtain the declaration of conformity (DoC) for R&TTE

Directive, please access the following URL address.

http://www.compliance.sony.de/

2. TV wireless system can only be used in the following countries:

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,

Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg,

Malta, The Netherlands, Norway, Poland, Portugal, Slovak

Republic, Romania, Slovenia, Spain, Sweden, Switzerland, Turkey,

and The United Kingdom.

When using the TV wireless system, channels 36 to 48 (5.15-

5.25GHz) are selectable for indoor use only.

TV Wireless System - Regulation

Information

For Customers in Italy

swith respect to private use, by the Legislative Decree of

1.8.2003, no. 259 ("Code of Electronic Communications"). In

particular Article 104 indicates when the prior obtainment of a

general authorization is required and Art. 105 indicates when

free use is permitted;

swith respect to the supply to the public of the RLAN access to

telecom networks and services (e.g. TV wireless system), by the

Ministerial Decree 28.5.2003, as amended, and Art. 25 (general

authorization for electronic communications networks and

services) of the Code of electronic communications

swith respect to private use, by the Ministerial Decree

12.07.2007

For Customers in Norway

Use of this radio equipment is not allowed in the geographical area

within a radius of 20 km from the centre of Ny-Ålesund, Svalbard.

For Customers in Cyprus

The end user must register the TV Wireless system in the

Department of Electronic Communications (P.I. 6/2006 and P.I.

6A/2006). P.I. 6/2006 is the Radiocommunications (Categories of

Stations Subject to General Authorization and Registration) Order

of 2006. P.I. 6A/2006 is the General Authorization for the use of

Radiofrequencies by Radio Local area Networks and by Wireless

Access Systems, including Radio Local Area Networks (WAS/

RLAN).

Trademark information

s is a registered trademark of the DVB Project

sManufactured under license from Dolby Laboratories. Dolby

and the double-D symbol are trademarks of Dolby Laboratories.

sHDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

s“BRAVIA” and are trademarks of Sony

Corporation.

s“XMB” and “xross media bar” are the trademarks of Sony

Corporation and Sony Computer Entertainment Inc.

Notice for Identification Label

Model No. and Power Supply rating (in accordance with applicable

safety regulation) label is located on the underside of the media

receiver.

The manufacturer of this product is Sony Corporation, 1-7-1

Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized

Representative for EMC and product safety is Sony

Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters please refer to

the addresses given in separate service or guarantee

documents.

FUSE

Identification

label

3 GB

Table of Contents

Start-up Guide 4

Safety Information.......................................................................................................................... 12

Precautions..................................................................................................................................... 14

Remote and Unit Controls/Indicators........................................................................................... 15

Watching TV

Watching TV.................................................................................................................................... 20

Using the Digital Electronic Programme Guide (EPG) ..................................................... 22

Using the Digital Favourite list ........................................................................................... 23

Using Optional Equipment

Connecting Chart ........................................................................................................................... 24

Viewing Pictures from Connected Equipment............................................................................. 26

Using USB Photo Viewer ............................................................................................................... 27

Using BRAVIA Sync with Control for HDMI ................................................................................. 28

Using MENU Functions

Navigating through Media Receiver Home Menu (XMB™)......................................................... 29

Settings ........................................................................................................................................... 30

Navigating through Monitor Home Menu..................................................................................... 38

Additional Information

Installing the Accessories (Wall-Mount Bracket) ........................................................................ 44

Specifications ................................................................................................................................. 46

Troubleshooting ............................................................................................................................. 49

: for digital channels only

Before operating the TV, please read the “Safety information” section of this manual.

Retain this manual for future reference.

4 GB

Start-up Guide

1: Checking the unit and

accessories

Monitor (1)

Media receiver (1)

Mains lead for monitor (with ferrite core) (1)

Do not remove the ferrite core.

Mains lead for mains adaptor (1)

Mains adaptor for media receiver (1)

Mains lead holder (1)

Screws (PSW 4×8) (2)

Remote RMF-ED001W (1)

Size AA batteries (R6 type) (2)

IR Blaster (Y-cable) (2)

Stand for media receiver (1)

2: Connecting an aerial/Set

Top Box/recorder (e.g. DVD

recorder) to the media

receiver

Connecting a Set Top Box/recorder (e.g.

DVD recorder) with SCART

Set Top Box/recorder (e.g. DVD recorder)

Scart lead

Media receiver

5 GB

Start-up Guide

Connecting a Set Top Box/recorder (e.g.

DVD recorder) with HDMI

• You can also connect equipment to the HDMI

input on the left side of the monitor.

3: Preventing the monitor

from toppling over

1Install a wood screw (4 mm in diameter,

not supplied) in the monitor stand.

2Install a machine screw (M6 x 12-15, not

supplied) into the screw hole of the

monitor.

3Tie the wood screw and the machine

screw with a strong cord.

Set Top Box/recorder (e.g. DVD recorder)

HDMI cable

Media receiver

6 GB

4: Connecting the mains

lead

• Make sure to secure the mains lead.

• To ensure compliance with current EMC

legislation, ensure the following conditions are

met.

• Fix the mains lead holder (supplied) after

checking the mains lead is in the groove of the

mains lead holder (supplied) to avoid scratching

the mains lead.

5: Performing the initial set-

Inserting batteries into the remote

• Observe the correct polarity when inserting

batteries.

• Do not use different types of batteries together or

mix old and new batteries.

• Dispose of batteries in an environmentally

friendly way. Certain regions may regulate the

disposal of batteries. Please consult your local

authority.

• Handle the remote with care. Do not drop or step

on it, or spill liquid of any kind onto it.

• Do not place the remote in a location near a heat

source, a place subject to direct sunlight, or a

damp room.

Establishing the wireless

communication between the unit

• Keep about 30 cm to 20 m distance between the

monitor and media receiver when installing.

• Keep clear the area between the monitor and

media receiver. Otherwise the picture may

deteriorate.

• Rearrange the installation position of the monitor

and media receiver in case of fuzzy picture.

• Do not place either unit on a metallic rack.

• Do not use two units or more at the same time in

an area of radio interference.

1Press 1 to turn on the unit power.

DC IN 18V

Monitor

to mains socket

Media receiver

to mains

socket

Screws (supplied)

Mains lead holder

(supplied)

Push and lift the cover to open.

POWER button

Media receiver

7 GB

Start-up Guide

2Check the LINK indicator on the media

receiver.

If wireless communication between the

media receiver and monitor is established,

this indicator lights up.

Performing the initial set-up

When you switch on the unit for the first

time, the Language menu appears on the

screen.

1Press F/f/G/g to select the language

displayed on the menu screens, then press

• If the remote does not work, press F/f/G/g/ on

the media receiver (page 18) to select the

language.

2Select “OK” then press .

3Press F/f to select the country in which

you will operate the unit, then press .

If the country in which you want to use

the unit does not appear in the list, select

“-” instead of a country.

4Press F/f to select the location type in

which you will operate the unit, then press

• Select “Home” for the best monitor settings

to use the monitor in the home.

5Select “OK” then press .

Monitor

POWER button

LINK

LINK indicator

1-10

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

EXT

Language

English

Nederlands

Français

Italiano

Deutsch

Türkçe

ББлгарски

Suomi

Dansk

Svenska

Norsk

Slovenčina

Română

Español

Català

Português

Polski

Česky

Magyar

Русский

Next, the Media Receiver Initial Set-up will start.

Please make sure the Media Receiver is on.

United Kingdom

Ireland

Nederland

Select country

België/Belgique

Luxembourg

France

Italia

Country

Location

Home

Select location

Shop

Auto Tuning

OK Cancel

Do you want to start Auto Tuning?

(Continued)

8 GB

6Press F/f to select “Antenna” or “Cable”,

then press .

If you select “Cable”, the screen for

selecting the scan type appears. See “To

tune the unit for Cable connection”

(page 8).

The unit starts searching for all available

digital channels, followed by all available

analogue channels. This may take some

time, so do not press any buttons on the

unit or remote while proceeding.

If a message appears for you to confirm

the aerial connection

No digital or analogue channels were

found. Check all the aerial/cable

connection and then press to start auto-

tuning again.

7When the “Programme Sorting” menu

appears on the screen, follow the steps of

“Programme Sorting” (page 34).

If you do not change the order in which

the analogue channels are stored on the

unit, press RETURN to go to step 8.

For details, see page 30.

For details, see page 28.

10 Press .

The unit has now tuned in all the available

channels.

• When a digital broadcast channel cannot be

received, or when selecting a country in which

there are no digital broadcasts in step 3, the time

must be set after performing step 7.

To tune the unit for Cable connection

1Press .

2Press F/f to select “Quick Scan” or “Full

Scan”, then press .

“Quick Scan” : channels are tuned

according to the cable operator

information within the broadcast signal.

Recommended setting for “Frequency”,

“Network ID” and “Symbol Rate” is

“Auto.”

This option is recommended for fast

tuning when supported by your cable

operator.

If the “Quick Scan” does not tune, please

use the “Full Scan” method below.

“Full Scan” : All available channels are

tuned and stored. This procedure may take

some time.

This option is recommended when “Quick

Scan” is not supported by your cable

provider.

For further information about supported

cable providers, refer to support web site:

http://support.sony-europe.com/TV/

DVBC/

3Press f to select “Start”, then press .

The unit starts searching for channels. Do

not press any buttons on the unit or

remote.

• Some cable providers do not support “Quick

Scan.” If no channels are detected using “Quick

Scan”, perform “Full Scan.”

Quick Start

Yes No

Do you want to enable Quick Start?

TV turns on more quickly but standby power

consumption is increased.

Control for HDMI

YesNo

Do you want to enable control for compatible

HDMI devices?

Choosing "Yes" will increase

standby power consumption.

9 GB

Start-up Guide

6: Operating optional

equipment using the remote

Connecting IR Blaster to the optional

equipment

Turn the power of the media receiver off

before connecting the IR Blaster.

Attach the IR Blaster near the remote sensor

(IR) of the equipment.

Performing the IR Blaster Set-up

By setting “IR Blaster Set-up”, this remote can

control most Sony Blu-ray Disc players, DVD

players, DVD recorders, and AV receivers, or

those of other manufacturers. Follow the steps

below to programme the remote.

1Press HOME on the remote.

2Press F/f to select “Settings”, then press

3Press F/f to select “Media Receiver Set-

up”, then press .

4Press F/f to select “IR Blaster Set-up”,

then press .

The “IR Blaster Set-up” screen appears.

5Press F/f to select “Inputs” to register the

remote, then select the following items:

Type: Connected equipment category.

Make: Maker of the equipment.

Code: IR code.

Test: Tests the power of the equipment

currently being set. Make sure the power

of the equipment turns on and off.

If the equipment is not working, or

some of the functions do not work

Enter the correct code or its alternatives (if

available) shown in the list in step 5. Note that

the list may not include codes for all models of

all brands.

• Only Sony equipment is guaranteed to properly

operate.

IR BLASTER

Blaster

Media receiver

Optional equipment

IR Blaster Set-up

Inputs Type Make Code

AV1

AV2

HDMI 1

HDMI 2

HDMI 3

Component

Blu-ray Disc

Sony

(Continued)

10 GB

Using optional equipment

For details, refer to the operating instructions

supplied with the connected equipment. Some

buttons may not work depending on the

connected equipment.

1Press HDMI 1, HDMI 2, HDMI 3, AV1,

AV2 or COMPONENT.

2Press EXT.

3While the EXT button lights up, press \/1

to turn the equipment on, then operate the

equipment using the following buttons.

•The N button has a tactile dot. Use the tactile dot

as a reference when operating other equipment.

REC

WIRELESS MENU

TOP MENU

F1 F2

BD/DVD

REC PAUSE REC STOP

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

EXT

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

PROG

Item Description

1BD/DVD

operating

buttons

•./>: Goes to the

beginning of the previous/

next title/chapter/scene/

track.

• / : Replays the scene/

briefly fast forwards the

scene.

•m/M: Fast reverses/fast

forwards the disc when

pressed during playback.

•N: Plays a disc at normal

speed.

•X: Pauses the playback.

•x: Stops the playback.

2F/f/G/g/3Selects / confirms an item.

3HOME Opens the menu.

4DVD record

buttons

•zREC: Starts the

recording.

•XREC PAUSE: Pauses the

recording.

•xREC STOP: Stops the

recording.

5F1/F2 Selects a function when using

a combination unit (e.g. a

DVD/HDD).

6BD/DVD

Displays the BD/DVD disc

menu.

7BD/DVD

TOP MENU

Displays the top menu of the

BD/DVD disc.

11 GB

Start-up Guide

Detaching the Table-Top

Stand from the Monitor

Disconnect the mains lead from the monitor

before detaching the Table-Top Stand.

• Remove the screws guided by the arrow marks

of the monitor.

Do not remove the Table-Top Stand for any

reason other than listed below.

– To wall-mount the monitor.

Attaching the Stand for

Media Receiver

The media receiver can also be used vertically

with the supplied stand.

1Match the lug on the centre of the stand

and the hole on the right side of the media

receiver.

Do not remove the plastic

cover on the Table-Top

Stand.

Stand

12 GB

Safety

Information

Installation/Set-up

Install and use the TV set in accordance with the instructions below

in order to avoid any risk of fire, electrical shock or damage and/or

injuries.

Installation

sThe TV set should be installed near an easily accessible mains

socket.

sPlace the TV set on a stable, level surface.

sOnly qualified service personnel should carry out wall

installations.

sFor safety reasons, it is strongly recommended that you use

Sony accessories, including:

– Wall-mount bracket SU-WL500/SU-WL700

sBe sure to use the screws supplied with the Wall-mount bracket

when attaching the mounting hooks to the TV set.

The supplied screws are designed so that they are 8 mm to 12

mm in length when measured from the attaching surface of the

mounting hook.

The diameter and length of the screws differ depending on the

Wall-mount bracket model.

Use of screws other than those supplied may result in internal

damage to the TV set or cause it to fall, etc.

Transporting

sBefore transporting the TV set,

disconnect all cables.

sTwo or three people are needed to

transport a large TV set.

sWhen transporting the TV set by

hand, hold it as shown on the right.

Do not put stress on the LCD panel

and the frame around the screen.

sWhen lifting or moving the TV set,

hold it firmly from the bottom.

sWhen transporting the TV set, do not

subject it to jolts or excessive

vibration.

sWhen transporting the TV set for

repairs or when moving, pack it

using the original carton and packing

material.

Ventilation

sNever cover the ventilation holes or insert anything in the

cabinet.

sLeave space around the TV set as shown below.

sIt is strongly recommended that you use a Sony wall-mount

bracket in order to provide adequate air-circulation.

Monitor

Installed on the wall

Installed with stand

Media receiver

sTo ensure proper ventilation and prevent the collection of dirt

or dust:

– Do not lay the TV set flat, install upside down, backwards,

or sideways.

– Do not place the TV set on a shelf, rug, bed or in a closet.

– Do not cover the TV set with a cloth, such as curtains, or

items such as newspapers, etc.

– Do not install the TV set as shown below.

8mm – 12mm

Screw (supplied with the Wall-

mount bracket)

Mounting Hook

Hook attachment on rear

of TV set

Be sure to hold the

bottom of the panel,

not the front part.

30 cm

10 cm

10 cm 10 cm

Leave at least this space around the set.

30 cm

10 cm10 cm 6 cm

Leave at least this space around the set.

Installed horizontally

Installed vertically

Top Front

Leave at least this space around the set.

20 cm

8 cm 8 cm

20 cm

6 cm 6 cm 6 cm 6 cm

10 cm

8 cm 8 cm

10 cm

13 GB

Mains lead

Handle the mains lead and socket as follows in order to avoid any

risk of fire, electrical shock or damage and/or injuries:

– Connect the TV set using a three-wire grounding type mains

plug to a mains socket with a protective earthing connection.

– Use only mains leads supplied by Sony, not other suppliers.

– Insert the plug fully into the mains socket.

– Operate the TV set on a 220-240 V AC supply only.

– When wiring cables, be sure to unplug the mains lead for your

safety and take care not to catch your feet on the cables.

– Disconnect the mains lead from the mains socket before

working on or moving the TV set.

– Keep the mains lead away from heat sources.

– Unplug the mains plug and clean it regularly. If the plug is

covered with dust and it picks up moisture, its insulation may

deteriorate, which could result in a fire.

Notes

sDo not use the supplied mains lead on any other equipment.

sDo not pinch, bend, or twist the mains lead excessively. The

core conductors may be exposed or broken.

sDo not modify the mains lead.

sDo not put anything heavy on the mains lead.

sDo not pull on the mains lead itself when disconnecting the

mains lead.

sDo not connect too many appliances to the same mains socket.

sDo not use a poor fitting mains socket.

Prohibited Usage

Do not install/use the TV set in locations, environments or

situations such as those listed below, or the TV set may malfunction

and cause a fire, electrical shock, damage and/or injuries.

Location:

Outdoors (in direct sunlight), at the seashore, on a ship or other

vessel, inside a vehicle, in medical institutions, unstable locations,

near water, rain, moisture or smoke.

Environment:

Places that are hot, humid, or excessively dusty; where insects may

enter; where it might be exposed to mechanical vibration, near

flammable objects (candles, etc).

The TV set shall not be exposed to dripping or splashing and no

objects filled with liquids, such as vases, shall be placed on the TV.

Situation:

Do not use when your hands are wet, with the cabinet removed, or

with attachments not recommended by the manufacturer.

Disconnect the TV set from mains socket and aerial during

lightning storms.

Broken pieces:

sDo not throw anything at the TV set. The screen glass may

break by the impact and cause serious injury.

sIf the surface of the TV set cracks, do not touch it until you have

unplugged the mains lead. Otherwise electric shock may result.

When not in use

sIf you will not be using the TV set for several days, the TV set

should be disconnected from the mains for environmental and

safety reasons.

sAs the TV set is not disconnected from the mains when the TV

set is just turned off, pull the plug from the mains to disconnect

the TV set completely.

sHowever, some TV sets may have features that require the TV

set to be left in standby to work correctly.

For children

sDo not allow children to climb on the TV set.

sKeep small accessories out of the reach of children, so that they

are not mistakenly swallowed.

If the following problems occur...

Turn off the TV set and unplug the mains lead immediately if any

of the following problems occur.

Ask your dealer or Sony service centre to have it checked by

qualified service personnel.

When:

– Mains lead is damaged.

– Poor fitting of mains socket.

– TV set is damaged by being dropped, hit or having something

thrown at it.

– Any liquid or solid object falls through openings in the cabinet.

NOTE ON MAINS ADAPTOR

Warning

To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

To prevent fire or shock hazard, do not place objects filled with

liquids, such as vases, on the apparatus.

Do not install this equipment in a confined space, such as a

bookshelf or similar unit.

sPlease ensure that the mains socket is installed near the

equipment and shall be easily accessible.

sBe sure to use the supplied mains adaptor and mains lead.

sDo not use any other mains adaptor. It may cause a malfunction.

sConnect the mains adaptor to an easily accessible mains socket.

sDo not coil the mains lead around

the mains adaptor. The core wire

may be cut and/or it may cause a

malfunction of the media receiver.

sDo not touch the mains adaptor

with wet hands.

sIf you notice an abnormality in the

mains adaptor, disconnect it from the mains socket

immediately.

sThe set is not disconnected from the mains source as long as it

is connected to the mains socket, even if the set itself has been

turned off.

Air circulation is

blocked.

Air circulation is

blocked.

Wall Wall

14 GB

Precautions

Viewing the TV

sView the TV in moderate light, as viewing the TV in poor light

or during long period of time, strains your eyes.

sWhen using headphones, adjust the volume so as to avoid

excessive levels, as hearing damage may result.

LCD Screen

sAlthough the LCD screen is made with high-precision

technology and 99.99% or more of the pixels are effective,

black dots may appear or bright points of light (red, blue, or

green) may appear constantly on the LCD screen. This is a

structural property of the LCD screen and is not a malfunction.

sDo not push or scratch the front filter, or place objects on top of

this TV set. The image may be uneven or the LCD screen may

be damaged.

sIf this TV set is used in a cold place, a smear may occur in the

picture or the picture may become dark. This does not indicate

a failure. These phenomena disappear as the temperature rises.

sGhosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

sThe screen and cabinet get warm when this TV set is in use.

This is not a malfunction.

sThe LCD screen contains a small amount of liquid crystal.

Some fluorescent tubes used in this TV set also contain

mercury. Follow your local ordinances and regulations for

disposal.

Handling and cleaning the screen surface/

cabinet of the TV set

Be sure to unplug the mains lead connected to the TV set from

mains socket before cleaning.

To avoid material degradation or screen coating degradation,

observe the following precautions.

sTo remove dust from the screen surface/cabinet, wipe gently

with a soft cloth. If dust is persistent, wipe with a soft cloth

slightly moistened with a diluted mild detergent solution.

sNever use any type of abrasive pad, alkaline/acid cleaner,

scouring powder, or volatile solvent, such as alcohol, benzene,

thinner or insecticide. Using such materials or maintaining

prolonged contact with rubber or vinyl materials may result in

damage to the screen surface and cabinet material.

sPeriodic vacuuming of the ventilation opening is recommended

to ensure to proper ventilation.

Optional Equipment

sKeep optional components or any equipment emitting

electromagnetic radiation away from the TV set. Otherwise

picture distortion and/or noisy sound may occur.

sThis equipment has been tested and found to comply with the

limits set out in the EMC Directive using a connection signal

cable shorter than 3 meters.

Wireless Function of the unit

sIf wireless equipment using the same frequency (5GHz band) as

the unit is working near the unit, noise may appear in pictures

or sound, or no picture may result. Also, other wireless or radio

equipment may cause interference. Keep 5GHz band wireless

equipment, such as a wireless LAN or cordless phones, away

from the unit.

sThe picture may be influenced depending on the installation

environment or situation of the monitor and media receiver

(page 4).

sAs the media receiver and monitor communicate wirelessly,

pictures from the media receiver may deteriorate compared to

those from the equipment connected to the monitor with HDMI.

sIt may take time to transmit pictures depending on the types of

signal, fast motion, such as game pictures, etc.

sIf pictures from a PC or still images, such as EPG, are

displayed, flickering or blurring may occur.

sThis unit can be used only in combination with the supplied

monitor and media receiver.

sDo not operate this unit near medical equipment (pacemaker,

etc.), as malfunction of the medical equipment may result.

RF Remote

sIf wireless equipment using the same frequency (2.4GHz band)

as the unit is working near the unit, the remote may not operate

properly.

Also, microwave ovens or radio equipment may cause

interference. Keep 2.4 GHz band wireless equipment away

from the unit.

Disposal of the TV set

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused

by inappropriate waste handling of this product. The recycling of

materials will help to conserve natural resources. For more detailed

information about recycling of this product, please contact your

local Civic Office, your household waste disposal service or the

shop where you purchased the product.

Disposal of waste batteries

(applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the battery or on the packaging

indicates that the battery provided with this

product shall not be treated as household

waste. By ensuring these batteries are disposed

of correctly, you will help prevent potentially negative

consequences for the environment and human health which could

otherwise be caused by inappropriate waste handling of the battery.

The recycling of the materials will help to conserve natural

resources. In case of products that for safety, performance or data

integrity reasons require a permanent connection with an

incorporated battery, this battery should be replaced by qualified

service staff only. To ensure that the battery will be treated

properly, hand over the product at end-of-life to the applicable

collection point for the recycling of electrical and electronic

equipment. For all other batteries, please view the section on how

to remove the battery from the product safely. Hand the battery over

to the applicable collection point for the recycling of waste

batteries. For more detailed information about recycling of this

product or battery, please contact your local Civic Office, your

household waste disposal service or the shop where you purchased

the product.

15 GB

Remote and Unit Controls/Indicators

As the unit and the supplied remote communicate by radio frequency, you can operate the unit

without aiming the remote at the unit.

Remote

Button Description

1TV "/1

(TV standby)

Press to turn the unit on and off from standby

mode.

2EXT Press to operate equipment with the IR

Blaster attached, by the remote (page 10).

(Subtitle

setting)

Press to change the subtitle language

(page 36) (in digital mode only).

4AUDIO In analogue mode: Press to change the dual

sound mode (page 32).

In digital mode: Press to change the language

to be used for the programme currently being

viewed (page 36).

(Info/Text

reveal)

In digital mode: Displays details of the

programme currently being viewed.

In analogue mode: Displays information.

Press once to display the current channel

number and screen mode. Press again to

display clock information. Press a third time

to remove the display from the screen.

In Text mode (page 21): Reveals hidden

information (e.g. answers to a quiz).

(Input select/

Text hold)

Press to display a list of inputs (page 25).

In Text mode: Press to hold the current page.

7F/f/G/g/Press F/f/G/g to move the on-screen cursor.

Press to select/confirm the highlighted

item. When playing a photo file: Press to

pause/start a slideshow. Press F/G to select

the previous file. Press f/g to select the next

file.

8OPTIONS Press to display a list that contains “Device

Control”, or shortcuts to some setting menus.

Use the “Device Control” menu to operate

equipment that is compatible with control for

HDMI. The listed options vary depending on

the input source.

REC

WIRELESS MENU

TOP MENU

F1 F2

BD/DVD

REC PAUSE REC STOP

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

EXT

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

PROG

• The number 5, PROG +,

AUDIO and buttons

have tactile dots. Use the

tactile dots as references

when operating the TV.

(Continued)

16 GB

9HOME Press to display the media receiver Home

menu in the media receiver mode (page 29),

or monitor Home menu in the monitor mode

(page 38).

0Coloured

buttons

When the coloured buttons are available, an

operation guide appears on the screen.

Follow the operation guide to perform a

selected operation (page 21, 22, 23).

qz Number

buttons

In TV mode: Press to select channels. For

channel numbers 10 and above, press the

second and third digits in quick succession.

In Text mode: Press to enter a page number.

qs (Favourite) Press to display the digital favourite list that

you have specified (page 23).

qd PROG+/–/ / In TV mode: Press to select the next (+) or

previous (–) channel.

In Text mode: Press to select the next or

previous page.

qf (Previous

channel)

Press to return to the channel that was last

viewed (for more than five seconds).

qg WIRELESS

Press to display “Wireless Channel Set-up”

(page 43).

qh % (Mute) Press to mute the sound. Press again to

restore the sound.

• In standby mode, if you want to turn on the

monitor without sound, press this button.

qj 2/+/–

(Volume)

Press to adjust the volume.

qk / (Text) Press to display text information (page 21).

ql RETURN / Press to return to the previous screen of the

displayed menu. When playing a photo file:

Press to stop the playback. (The display

returns to the file or folder list.)

w; GUIDE /

(EPG)

Press to display the Digital Electronic

Programme Guide (EPG) (page 22).

Button Description

REC

WIRELESS MENU

TOP MENU

F1 F2

BD/DVD

REC PAUSE REC STOP

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

EXT

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

PROG

qj qd

17 GB

wa ANALOG/

DIGITAL

Press to display the analogue or digital

channel that was last viewed.

ws THEATRE You can set Theatre Mode to on or off. When

Theatre Mode is set to on, the optimum audio

output (if the unit is connected with an audio

system using an HDMI cable) and picture

quality for film-based contents are

automatically set.

• If you turn the unit off, Theatre Mode is

also turned off.

• “Control for HDMI” (BRAVIA Sync) is

only available with the connected Sony

equipment that has the BRAVIA Sync or

BRAVIA Theatre Sync logo or is

compatible with control for HDMI.

wd SYNC MENU Displays the menu of connected HDMI

equipment. While viewing other input

screens or TV programmes, “HDMI Device

Selection” is displayed when the button is

pressed.

• “Control for HDMI” (BRAVIA Sync) is

only available with the connected Sony

equipment that has the BRAVIA Sync logo

or is compatible with control for HDMI.

(Screen mode)

Press to change the screen format (page 21).

wg Buttons for

using optional

equipment

You can operate the equipment connected to

the unit (page 10).

wh HDMI1/2/3,

MONITOR

HDMI, AV1/2,

COMPONENT

Press to select the input source.

wj "/1Press to turn equipment connected to the unit

on or off (page 10).

Button Description

REC

WIRELESS MENU

TOP MENU

F1 F2

BD/DVD

REC PAUSE REC STOP

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

EXT

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

PROG

(Continued)

18 GB

Monitor

Media Receiver

Media Receiver Buttons and Unit Indicators

Item Description

1Remote control sensor Receives IR signals from the remote (if using an IR remote, not

supplied).

Do not put anything over the sensor, as its function may be affected.

21 (Power) Turns the unit on or off.

• To disconnect the unit completely, pull the plug from the mains.

3Light Sensor Do not put anything over the sensor, as its function may be affected.

4 (Timer indicator) Lights up in orange when the reminder is set (page 22) or the timer is set

(page 30).

43 5 67

PROG

HOME

PROG

HOME

7 6 8 9 0 q

LINK

19 GB

• Make sure that the unit is completely turned off before unplugging the mains lead. Unplugging the mains

lead while the unit is turned on may cause the indicator to remain lit or may cause the unit to malfunction.

• Do not put anything over the indicators as their functions may be affected.

• When the media receiver is used vertically with the stand attached, the qa and qs button functions (in the

unit menu) are exchanged.

5 (Picture Off indicator) Lights up in green when the picture is switched off (page 43).

61 (Standby indicator) Lights up in red when the unit is in standby mode.

7" (Power indicator) Lights up in green when the unit is turned on.

8LINK indicator Lights up when the wireless connection between the media receiver and

monitor is stable.

9 (HOME) Displays the media receiver Home menu in the media receiver mode

(page 29), or monitor Home menu in the monitor mode (page 38).

0/ (Input select/OK) In monitor mode: Selects the input source from equipment connected to

the unit sockets (page 24).

In unit menu: Selects the menu or option, and confirms the setting.

qa 2 +/–/ / In monitor mode: Increases (+) or decreases (–) the volume.

In unit menu: Moves through the options right ( ) or left ( ).

qs PROG +/–/ / In TV mode: Selects the next (+) or previous (–) channel.

In unit menu: Moves through the options up ( ) or down ( ).

Item Description

HOME

20 GB

Watching TV

1Press 1 on the media receiver or monitor

to switch on.

• When either unit is switched on, the other is

also switched on in tandem.

When the unit is in standby mode (the 1

(standby) indicator on the unit (front) is

red), press TV "/1 on the remote to switch

on the unit.

2Press DIGITAL/ANALOG to toggle

between digital mode and analogue mode.

The channels available vary depending on

the mode.

3Press the number buttons or PROG +/– to

select a TV channel.

To select channel numbers 10 and above

using the number buttons, enter the

second and third digits within two

seconds.

To select a digital channel using the

Guide, see page 22.

In digital mode

An information banner appears briefly.

The following icons may be indicated on

the banner.

Additional operations

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

EXT

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

PROG

: Radio service

: Scrambled/Subscription service

: Multiple audio languages available

: Subtitles available

: Subtitles available for the hearing

impaired

: Recommended minimum age for current

programme (from 4 to 18 years)

: Parental Lock

To Do this

Turn on the monitor

from standby mode

without sound

Press %. Press 2 +/– to

set the volume level.

Adjust the volume Press 2 + (increase)/

– (decrease).

21 GB

Watching TV

To access Text

Press /. Each time you press /, the display

changes cyclically as follows:

Text t Text over the TV picture (mix mode)

t No Text (exit the Text service)

To select a page, press the number buttons or

PROG +/–.

To hold a page, press / .

To reveal hidden information, press / .

• When four coloured items appear at the bottom of

the Text page, Fastext is available. Fastext allows

you to access pages quickly and easily. Press the

corresponding coloured button to access the page.

To change the screen format manually

Press repeatedly to select the desired screen

format.

* Parts of the top and bottom of the picture may be cut off.

• Some characters and/or letters at the top and the

bottom of the picture may not be visible in

“Smart” mode. In such a case, you can select

“Vertical Size” using the “Screen Settings”

(page 31) menu and adjust vertical size to make it

visible.

• When “Auto Format” is set to “On”, the unit will

automatically select the best mode to suit the

broadcast (page 31).

• You can adjust the position of the picture when

selecting “Smart”, “14:9” or “Zoom.” Press F/f

to move up or down (e.g. to read subtitles).

Using the Options menu

Press OPTIONS to display the following

options when viewing a TV programme.

Smart*

Displays conventional

4:3 broadcasts with an

imitation wide screen

effect. The 4:3 picture

is stretched to fill the

screen.

4:3

Displays conventional

4:3 broadcasts (e.g.

non-wide screen TV)

in the correct

proportions.

Wide

Displays wide screen

(16:9) broadcasts in

the correct

proportions.

Zoom*

Displays

cinemascopic (letter

box format)

broadcasts in the

correct proportions.

14:9* (for media receiver inputs only)

Displays 14:9

broadcasts in the

correct proportions.

As a result, black

border areas are

visible on the screen.

Options Description

Picture Mode See page 39.

Sound Mode See page 41.

Speaker See page 32.

Motionflow See page 40.

Subtitle Setting (in

digital mode only) See page 36.

Sleep Timer See page 30.

Power Saving See page 43.

Use MONITOR

HDMI Switch to MONITOR

HDMI input.

System Information

(in digital mode only) See page 37.

22 GB

Using the Digital Electronic Programme Guide (EPG) *

1In digital mode, press GUIDE.

2Perform the desired operation as shown in

the following table or displayed on the

screen.

* This function may not be available in some countries.

• If an age restriction for programmes has been selected, a message asking for a PIN Code will appear on the

screen. For details, see “Parental Lock” (page 36).

001 BBC ONE

002 BBC TWO

003 ITV1

004 Channel 4

005 Five

006 ITV2

007 BBC THREE

008 BBC FOUR

009 ITV3

010 SKY THREE

Category30 min ViewNextPrevious

Homes Under the Hammer Neighbours Afterlife

Ready Steady Cook Extraordinary People: Britains Iden... CSI: Crime Scene Inv...

Dancing On Ice Exclusive Cracker

Sign Zone: Ancient Rome: The Rise a... The Jeremy Kyle... Homes Under th...

House Law and Order: Special Victims U... PartyPoker.com Worl...

Crime Hour: Midsomer Murders Vodafone TBA: L...

BBC Learning Zone: Schools: World P... A Picture of Brit... Eastenders

ER Real Crime: The Truth About the... This is BBC FOUR

Past Everybody Loves Raymond The Sharon Osb...

Racing from Chepstow and Ascot Baseball Wedne... Trans World Sport

Today

13: 0012: 3012: 0011: 30

All Categories

Fri 16 Mar 11:35

To Do this

Watch a programme Press F/f/G/g to select the programme, then press .

Turn off the Guide Press GUIDE.

Sort the programme information by

category

– Category list

1Press the blue button.

2Press F/f to select a category, then press .

Set a programme to be displayed

automatically on the screen when it

starts

– Reminder

1Press F/f/G/g to select the future programme you want to

display, then press / .

2Press F/f to select “Reminder”, then press .

A c symbol appears by that programme’s information. The

indicator on the monitor front panel lights up in orange.

• If you switch the monitor to standby mode, it will automatically

turn itself on when the programme is about to start.

Cancel a reminder

– Timer list 1Press / .

2Press F/f to select “Timer list”, then press .

3Press F/f to select the programme you want to cancel, then

press .

4Press F/f to select “Cancel Timer”, then press .

A display appears to confirm that you want to cancel the

programme.

5Press G/g to select “Yes”, then press to confirm.

23 GB

Watching TV

Using the Digital Favourite list *

1In digital mode, press .

2Perform the desired operation as shown in

the following table or displayed on the

screen.

* This function may not be available in some countries.

Digital

Favourite Set-up

Favourites 1

001 BBC ONE

002 BBC TWO

003 ITV1

004 Channel 4

005 Five

006 BBC Three

007 ITV2

008 Sky Sports

009 UKTV History

010 Channel 4+1

011 More 4

012 abc1

013 QVC

014 UKTV Gold

015 The HITS

016 UKTV Bright Ideas

017 ftn

018 TMF

019 E4

020 E4+1

Favourites 2NextPrevious

Enter Programme Number: - - -

Digital Favourite list

To Do this

Create your Favourite list for the first

time 1Press F/f/G/g to select the channel you want to add, then press

Channels that are stored in the Favourite list are indicated by a

symbol.

2Press yellow key to select “Favourites 2” or “Favourites 3”.

Watch a channel 1Press yellow key to navigate through favourite lists.

2Press F/f to select the channel, then press .

Turn off the Favourite list Press RETURN.

Add or remove channels in the

currently edited Favourite list 1Press the blue button.

2Press the yellow button to choose the list you want to edit.

3Press F/f/G/g to select the channel you want to add or remove,

then press .

Remove all channels from the current

Favourite list 1Press the blue button.

2Press the yellow button to select the favourite list you want to

edit.

3Press the blue button.

4Press G/g to select “Yes”, then press to confirm.

24 GB

Using Optional Equipment

Connecting Chart

You can connect a wide range of optional equipment to your unit. Connecting cables are not

supplied.

Media receiver

Monitor

AV2 COMPONENT IN

DC IN 18V

(RGB)

PC IN

DIGITAL AUDIO

OUT (OPTICAL)

32 1

IR BLASTER

AV1

12 345

9876

Rear

PROG

HOME

LINK

0 q

Front

SERVICE

ONLY

MONITOR

Left side

25 GB

Using Optional Equipment

Connect to Input symbol on

screen

Description

1/ AV2 AV2 When connecting mono equipment, connect to the L

socket.

COMPONENT IN

Component The component video sockets support the following video

inputs only: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p.

3/ AV1 AV1 When you connect a decoder, the TV tuner outputs scrambled

signals to the decoder, and the decoder unscrambles the

signals before outputting them.

DIGITAL AUDIO

OUT (OPTICAL)

Use an optical audio cable.

RF input that connects to your cable TV system or VHF/UHF.

6! DC IN 18V Connects the supplied mains adaptor.

7(RGB)/

PC IN

PC It is recommended to use a PC cable with ferrites, such as the

“Connector, D-sub 15” (ref. 1-793-504-13, available in Sony

Service Centre) or equivalent.

8HDMI IN 1/2/3,

MONITOR HDMI

HDMI 1/

HDMI 2/

HDMI 3/

Monitor

HDMI

Digital video and audio signals are input from the connected

equipment.

In addition, when you connect the equipment that is

compatible with control for HDMI, communication with the

connected equipment is supported. Refer to page 33 to set up

this communication.

• The HDMI sockets support the following video inputs only:

480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p

(1080/24p is for MONITOR HDMI only). For PC video

inputs, see page 48.

• Be sure to use only an authorised HDMI cable bearing the

HDMI logo.We recommend that you use a Sony HDMI

cable (high speed type).

• For HDMI 1/2/3, when connecting an audio system that is

compatible with control for HDMI, be sure to also connect

it to the DIGITAL AUDIO OUT (OPTICAL) socket.

9IR BLASTER Connects the supplied IR Blaster cables.

0CAM

(Conditional

Access Module)

To use Pay Per View services.

For details, refer to the instruction manual supplied with your

CAM. To use the CAM, remove the “dummy” card from the

CAM slot, then turn off the monitor and insert your CAM card

into the slot. When you are not using the CAM, we recommend

that you keep the “dummy” card in the CAM slot.

• CAM is not supported in all countries. Please check with

your authorised dealer.

• If the CAM card becomes jammed while inserting, try

again. Do not insert forcefully.

qa i Headphones You can listen to monitor sound through headphones.

qs USB You can enjoy photo files stored in a Sony digital still camera

or camcorder through a USB cable or USB storage device on

your unit (page 27).

qd SERVICE ONLY For service use only.

26 GB

Viewing Pictures from

Connected Equipment

Switch on the connected equipment, then

perform one of the following operation.

For equipment connected to the scart

sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment

appears on the screen.

For an auto-tuned VCR/ DVD recorder

In analogue mode, press PROG +/–, or the

number buttons, to select the video channel.

For equipment connected to MONITOR

HDMI socket

Press MONITOR HDMI.

For other connected equipment

Press / to display a list of connected

equipment. Press F/f to select the desired

input source, then press .

The highlighted item is automatically selected

if you do not perform any operation for two

seconds after pressing F/f.

If you have set an input source to “Skip” in the

“AV Preset” menu (page 32), that input source

does not appear in the list.

• To return to normal TV mode, press DIGITAL/

ANALOG.

Using the Options menu

Press OPTIONS to display the following

options when viewing pictures from connected

equipment.

When equipment is connected to the media

receiver sockets

When equipment is connected to the

MONITOR HDMI socket

If wireless communication is not successful

Option Description

Picture Mode (except

PC/HDMI PC input

mode)

See page 39.

Sound Mode See page 41.

Speaker See page 32.

Motionflow (except

PC/HDMI PC input

mode)

See page 40.

Sleep Timer (except

PC/HDMI PC input

mode)

See page 30.

Power Saving See page 43.

Use MONITOR

HDMI

Switch to MONITOR

HDMI input.

Auto Adjustment (in

PC/HDMI PC input

mode only)

See page 31.

Horizontal Shift (in

PC/HDMI PC input

mode only)

See page 31.

Device Control (in

HDMI input mode

only)

See page 28.

Option Description

Picture Adjustment See page 39.

Sound See page 41.

Power Saving See page 43.

Motionflow (except

HDMI PC input

mode)

See page 40.

Horizontal Shift (in

HDMI PC input

mode only)

See page 42.

Vertical Shift (in

HDMI PC input

mode only)

See page 42.

Device Control See page 28.

HDMI Device

Selection See page 17.

Use Media Receiver Switch to media receiver

inputs.

Option Description

Wireless Channel

Set-up See page 43.

Use MONITOR

HDMI Switch to MONITOR

HDMI input.

Option Description

27 GB

Using Optional Equipment

Using USB Photo Viewer

You can enjoy photo files stored in a Sony

digital still camera or camcorder through a

USB cable or USB storage media on your unit.

1Connect a supported USB device to the

media receiver.

2Press HOME.

3Press G/g to select “Photo”, then press F/

f to select “USB Photo Viewer” and press

The thumbnail screen appears.

4Press F/f/G/g to select a file or folder,

then press .

When you select a folder, select a file,

then press .

Playback starts.

5Press RETURN to go back to the

thumbnail screen.

Additional operations

(Photo) Available Options

• Picture quality may appear coarse when using

(Photo) because images may be enlarged

depending on the file. Also, images may not fill

the entire screen depending on the image size and

aspect ratio.

• Some photo files may take some time to be

displayed when using (Photo).

• While the unit is accessing the data on the USB

device, observe the following:

– Do not turn off the unit or connected USB

device.

– Do not disconnect the USB cable.

– Do not remove the USB device.

• Sony will not be held liable for any damage to, or

loss of, data on the recording media due to a

malfunction of any connected devices or the unit.

• USB photo viewer supports DCF-compliant JPEG

photographs only.

• When you connect a Sony digital still camera, set

the camera’s USB connection mode to Auto or

“Mass Storage.” For more information about USB

connection mode, refer to the instructions supplied

with your digital camera.

• USB Photo Viewer supports FAT32 file system

only.

• Depending on the exact file specifications, some

files, including those modified on a PC, cannot be

played even if the file format is supported.

• Check the website below for updated information

about compatible USB devices.

http://support.sony-europe.com/TV/compatibility/

To display a photograph

— Picture Frame

You can display a photograph on the screen

for a selected period of time. After that period,

the unit automatically switches itself into

standby mode.

1Press HOME.

2Press G/g to select “Photo”, then press F/

f to select “Picture Frame” and press .

To select a photograph

Press OPTIONS, then select “Image

Selection” and press . Then, select a

photograph, and press to set.

To set the duration of displaying a

photograph

Press OPTIONS, then select “Duration”

and press . Then, select the duration,

and press .

The counter appears on the screen.

To return to the XMB™

Press RETURN.

• If the photograph is selected from a USB device, it

must remain connected to the unit.

• If “Sleep Timer” is activated, the unit

automatically will switch into standby mode.

Option Description

Device Selection Press G/g to select a

device when multiple

devices are connected.

BRAVIA images are

predefined device.

Slideshow Displays the photographs

one by one.

Set-up You can make advanced

settings for a slide show,

and set the display

sequence of the

thumbnails.

Option Description

Picture Mode See page 39.

Sleep Timer See page 30.

Power Saving See page 43.

The data on the USB device may be damaged.

28 GB

Using BRAVIA Sync with

Control for HDMI

The control for HDMI function enables the

unit to communicate with the connected

equipment that is compatible with the

function, using HDMI CEC (Consumer

Electronics Control).

For example, by connecting Sony equipment

that is compatible with control for HDMI

(with HDMI cables), you can control them

together.

Be sure to connect the equipment correctly,

and make the necessary settings.

Control for HDMI

• Automatically turns the connected

equipment off when you switch the unit to

standby mode using the remote.

• Automatically turns the unit on and

switches the input to the connected

equipment when the equipment starts to

play.

• If you turn on a connected audio system

while the unit is on, the sound output

switches from the monitor speaker to the

audio system.*

• Adjusts the volume (2 +/–) and mutes the

sound (%) of a connected audio system.*

• You can operate the connected Sony

equipment that has the BRAVIA Sync logo

by the supplied remote by pressing:

–N/x/X/m/M to operate the connected

equipment directly.

–SYNC MENU to display the menu of the connected

HDMI equipment on the screen.

After displaying the menu, you can operate the

menu screen by using F/f/G/g and .

–OPTIONS to display “Device Control”, then select

options from “Menu”, “Options”, and “Content

List” to operate the equipment.

– Refer to the instruction manual of the equipment for

available control.

To connect the equipment that is

compatible with control for HDMI

Connect the compatible equipment and the

unit with an HDMI cable. When connecting an

audio system*, be sure to also connect the

DIGITAL AUDIO OUT (OPTICAL) socket

of the media receiver and the audio system

using an optical audio cable. For details, see

page 25.

To make the control for HDMI settings

The control for HDMI settings must be set on

both the unit side and connected equipment

side. See “HDMI Set-up” on page 33 for the

unit side settings. For settings on the

connected equipment, refer to the operating

instructions for that equipment.

* Function only available when connected to HDMI 1/2/3.

29 GB

Using MENU Functions

Navigating through Media Receiver Home Menu (XMB™)

For setting the menu of the media receiver, switch to the media receiver mode by pressing one of

the function buttons (page 10).

The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the

monitor screen. The XMB™ is an easy way to select programming and adjust settings on your

media receiver.

1Press HOME.

The media receiver Home menu appears on the screen.

2Press G/g to select the category.

3Press F/f to select the item, then press .

4Follow the instructions on the screen.

5Press HOME to exit.

• The options you can adjust vary depending on the situation.

• Unavailable options are greyed out or not displayed.

Media category icon Description

Settings You can make advanced settings and adjustments. For details about

settings, see page 30.

Photo You can enjoy photo files via USB devices (page 27).

Digital You can select a digital channel, Favourite list (page 23), or Guide

(page 22).

You can also select a channel using the number buttons or PROG +/–.

Analogue You can select an analogue channel.

You can also select a channel using the number buttons or PROG +/–.

To hide the list of analogue channels, set “Programme List Display” to

“Off” (page 33).

External Inputs You can select equipment connected to the media receiver.

To assign a label to an external input, see “AV Preset” (page 32).

Picture

Analogue Set-up

Monitor

Media Receiver Set-up

Features

Settings

Sound

Set-up

Media Category Bar

Category Object Bar

30 GB

Settings

See the “Picture” setting for monitor (page 39).

See the “Sound” setting for monitor (page 41).

Picture

Sound

Features

Quick Start The unit turns on faster than usual within two hours after switching to standby

mode. However, power consumption in standby mode is 38 watt higher than usual.

Timer Settings Sets the timer to turn on/off the unit.

Sleep Timer Sets a period of time after which the unit automatically

switches itself into standby mode.

When the “Sleep Timer” is activated, the (Timer) indicator

on the monitor (front panel) lights up in orange.

• If you turn off the unit and turn it on again or switch to the

monitor mode from the media receiver mode, “Sleep

Timer” is reset to “Off.”

• A notification message appears on the screen one minute

before the unit switches to standby mode.

On Timer

Settings

On Timer Sets the timer to turn on the unit from

standby mode.

Timer Mode Sets the desired day(s) of the week you

want the timer to turn on the unit.

Time Sets the time to turn on the unit.

Duration Sets how long you want the unit to stay

on before switching to standby mode

again.

• If you switch to the monitor mode from the media receiver

mode, “Duration” is cancelled.

Clock Set Allows you to adjust the clock manually. When the unit is

receiving digital channels, the clock cannot be adjusted

manually since it is set to the time code of the broadcasted

signal.

31 GB

Using MENU Functions

Media Receiver Set-up

Auto Start-up Starts the “first time operation menu” to select the language, country and location,

and tune in all available digital and analogue channels. Usually, you do not need to

do this operation because the language and country will have been selected and

channels already tuned when the unit was first installed (page 7). However, this

option allows you to repeat the process (e.g., to retune the unit after moving house,

or to search for new channels that have been launched by broadcasters).

Screen Settings Screen Format See “To change the screen format manually” on page 21.

Auto Format Automatically changes the screen format according to the

input signal. To keep your setting, select “Off.”

Display Area Adjusts the picture display area in 1080i/p and 720p sources

when “Screen Format” is set to “Wide.”

Auto During digital broadcasts, displays

pictures in accordance with the settings

recommended by the broadcast station.

Full Pixel Displays pictures in their original size.

Normal Displays pictures in their recommended

size.

Horizontal Shift Adjusts the horizontal position of the picture.

Vertical Shift Adjusts the vertical position of the picture when “Screen

Format” is set to “Smart”, “Zoom” or “14:9.”

Vertical Size Adjusts the vertical size of the picture when “Screen Format”

is set to “Smart”, “Zoom” or “14:9.”

PC Settings Screen Format Selects a screen format for displaying input from your PC.

Full 1 Enlarges the picture to fill the vertical

display area, keeping its original

horizontal-to-vertical aspect ratio.

Full 2 Enlarges the picture to fill the display

area.

Reset Resets the PC screen settings to the factory settings.

Auto Adjustment Automatically adjusts the display position, phase and pitch of

the picture when the unit receives an input signal from the

connected PC.

• “Auto Adjustment” may not work well with certain input

signals. In such cases, manually adjust “Phase”, “Pitch” and

“Horizontal Shift.”

Phase Adjusts the phase when the screen flickers.

Pitch Adjusts the pitch when the picture has unwanted vertical

stripes.

Horizontal Shift Adjusts the horizontal position of the picture.

Power

Management

Switches the unit to standby mode if no signal is received for

30 seconds in the PC input.

(Continued)

32 GB

AV Set-up AV Preset Assigns a name to any equipment connected to the media

receiver. The name will be displayed briefly on the screen

when the equipment is selected. You can skip an input source

that is not connected to any equipment.

1Press F/f to select the desired input source, then press

2Press F/f to select the desired option below, then press

-, CABLE, SAT,

VCR, DVD/BD,

GAME, AUDIO

SYSTEM, CAM,

Uses one of the preset labels to assign a

name to connected equipment.

Edit: Creates your own label.

1Press F/f to select the desired letter

or number (“_” for a blank space),

then press g.

If you input a wrong character

Press G/g to select the wrong

character. Then, press F/f to select

the correct character.

2Repeat the procedure in step 1 until

the name is completed.

3Select “OK”, then press .

Skip Skips an input source that is not

connected to any equipment when you

press F/f to select the input source.

Speaker Turns on/off the monitor’s internal speakers.

TV Speaker The monitor speakers are turned on in

order to listen to the TV’s sound through

the monitor speakers.

Audio System The monitor speakers are turned off in

order to listen to the TV’s sound only

through your external audio equipment

connected to the audio output sockets.

When connected with “Control for

HDMI” compatible equipment, you can

turn the connected equipment on

interlocked with the monitor. This setting

must be made after connecting the

equipment.

Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast.

Stereo/Mono For a stereo broadcast.

A/B/Mono For a bilingual broadcast, select “A” for sound channel 1, “B”

for sound channel 2, or “Mono” for a mono channel, if

available.

• If you select other equipment connected to the unit, set “Dual Sound” to

“Stereo”, “A” or “B.”

IR Blaster Set-up See page 9 for the “IR Blaster Set-up” setting.

33 GB

Using MENU Functions

See the “Monitor Set-up” setting for monitor (page 43).

HDMI Set-up This is used to set the “Control for HDMI” compatible equipment connected to the

HDMI sockets. Note that the interlock setting must also be made on the connected

“Control for HDMI” compatible equipment side.

Control for HDMI This sets whether to interlock the “Control for HDMI”

compatible equipment and the unit. When set to “On”, the

following menu items can be performed. However, power

consumption in standby mode is higher than usual. If the

specific Sony equipment that is compatible with “Control for

HDMI” is connected, this setting is applied to the connected

equipment automatically when the “Control for HDMI” is set

to “On” using the unit.

Auto Devices Off When this is set to “On”, the “Control for HDMI” compatible

equipment turns off when you switch the unit to standby

mode using the remote.

Auto TV On When this is set to “On” and if the connected HDMI control

compatible equipment is turned on, the unit automatically

turns on, and the displays the HDMI input from the

connected equipment.

Device List

Update

Creates or updates the “HDMI Device List.” Up to 14

“Control for HDMI” compatible equipment can be

connected, and up to 4 equipment can be connected to a

single socket. Be sure to update the “HDMI Device List”

when you change the “Control for HDMI” compatible

equipment connections or settings. Select them manually one

by one until getting a correct picture for several seconds.

HDMI Device List Displays the connected “Control for HDMI” compatible

equipment.

Product Information Displays your media receiver’s product information.

Select “Monitor Product Information” to display your monitor’s product

information.

All Reset Resets all settings to the factory settings and then displays the “Auto Start-up”

screen.

• Be sure not to turn the unit off during this period (it takes about 30 seconds) or

press any buttons.

• All settings, including digital favourite list, country, language, auto tuned

channels, etc. will be reset.

Monitor Set-up

Analogue Set-up

Programme List

Display

Select “Off” to hide the list of analogue channels from the XMB™

(XrossMediaBar).

Auto Tuning Tunes in all the available analogue channels.

This option allows you to retune the unit after moving house, or to search for new

channels that have been launched by broadcasters.

(Continued)

34 GB

Programme Sorting Changes the order in which the analogue channels are stored on the unit.

1Press F/f to select the channel you want to move to a new position, then press

2Press F/f to select the new position for your channel, then press .

Manual Programme

Preset

Before selecting “Label/AFT/Audio Filter/LNA/Skip”, press PROG +/– to select

the programme number with the channel. You cannot select a programme number

that is set to “Skip” (page 32).

Programme/

System/Channel

Presets programme channels manually.

1Press F/f to select “Programme”, then press .

2Press F/f to select the programme number you want to

manually tune (if tuning a VCR/ DVD recorder, select

channel 00), then press RETURN.

3Press F/f to select “System”, then press .

4Press F/f to select one of the following TV broadcast

systems, then press RETURN.

B/G: For western European countries

I: For the United Kingdom

D/K: For eastern European countries

L: For France

5Press F/f to select “Channel”, then press .

6Press F/f to select “S” (for cable channels) or “C” (for

terrestrial channels), then press g.

7Tune the channels as follows:

If you do not know the channel number

(frequency)

Press F/f to search for the next available channel. When

a channel has been found, the search will stop. To

continue searching, press F/f.

If you know the channel number (frequency)

Press the number buttons to enter the channel number of

the broadcast you want or your VCR/DVD recorder

channel number.

8Press to jump to “Confirm”, then press .

9Press f to select “OK”, then press .

Repeat the procedure above to preset other channels

manually.

Label Assigns a name of your choice, up to five letters or numbers,

to the selected channel. This name will be displayed briefly

on the screen when the channel is selected.

To input characters, follow steps 1 to 3 of “Edit:” (page 32).

AFT Allows you to fine-tune the selected programme number

manually if you feel that a slight tuning adjustment will

improve the picture quality.

You can adjust the fine tuning over a range of –15 to +15.

When “On” is selected, the fine tuning is performed

automatically.

35 GB

Using MENU Functions

Audio Filter Improves the sound for individual channels in the case of

distortion in mono broadcasts. Sometimes a non-standard

broadcast signal can cause sound distortion or intermittent

sound muting when watching mono programmes.

If you do not experience any sound distortion, we

recommend that you leave this option set to the factory

setting “Off.”

• You cannot receive stereo or dual sound when “Low” or

“High” is selected.

LNA Improves the picture quality for individual channels in the

case of very weak broadcast signals (noisy picture).

If you cannot see any improvement in the picture quality even

if you set to “On”, set this option to “Off” (factory setting).

Skip Skips unused analogue channels when you press PROG +/–

to select channels. (You can still select a skipped channel

using the number buttons.)

Confirm Saves changes made to the “Manual Programme Preset”

settings.

Digital Set-up

Digital Tuning Digital Auto

Tuning

Tunes in the available digital channels.

This option allows you to retune the unit after moving house,

or to search for new channels that have been launched by

broadcasters. For details, see step 6 of “Performing the initial

set-up” (page 8).

Programme

Sorting

Removes any unwanted digital channels stored on the unit,

and changes the order of the digital channels stored on the

unit.

1Press F/f to select the channel you want to remove or

move to a new position.

You can also select a channel by pressing the number

buttons to enter its three-digit channel number.

2Remove or change the order of the digital channels as

follows:

To remove the digital channel

Press . After a confirmation message appears, press G

to select “Yes”, then press .

To change the order of the digital channels

Press g, then press F/f to select the new position for the

channel and press G.

3Press RETURN.

Digital Manual

Tuning

Tunes the digital channels manually. This feature is available

when “Digital Auto Tuning” is set to “Antenna.”

1Press the number button to select the channel number

you want to manually tune, then press F/f to tune the

channel.

2When the available channels are found, press F/f to

select the channel you want to store, then press .

3Press F/f to select the programme number where you

want to store the new channel, then press .

Repeat the above procedure to manually tune other channels.

(Continued)

36 GB

Subtitle Set-up Subtitle Setting When “For Hard Of Hearing” is selected, some visual aids

may also be displayed with the subtitles (if TV channels

broadcast such information).

Subtitle

Language

Allows you to select the language of the subtitles.

Audio Set-up Audio Type Switches to broadcast for the hearing impaired when “For

Hard Of Hearing” is selected.

Audio Language Selects the language used for a programme. Some digital

channels may broadcast several audio languages for a

programme.

Audio

Description

Provides audio description (narration) of visual information if

TV channels broadcast such information.

Mixing Level*Adjusts the unit main audio and Audio Description output

levels.

Dynamic Range Compensates for differences in the audio level between

different channels. Note that this function may have no effect

for some channels.

Optical Out Selects the audio signal that is output from the DIGITAL

AUDIO OUT (OPTICAL) terminal on the rear of the media

receiver. Set to “Auto” when equipment compatible with

Dolby Digital is connected, and set to “PCM” when non-

compatible equipment is connected.

* This option is only available when “Audio Description” is set to “On.”

Radio Display Displays the screen wallpaper when you listen to a radio broadcast after 20 seconds

without pressing any buttons.

You can select the screen wallpaper colour, display a random colour or view a

slide show (page 27).

To cancel the screen wallpaper display temporarily, press any button.

Parental Lock Sets an age restriction for programmes. Any programme that exceeds the age

restriction can only be watched after a PIN Code is entered correctly.

1Press the number buttons to enter your existing PIN Code.

If you have not previously set a PIN, a PIN Code entry screen appears. Follow

the instructions of “PIN Code” below.

2Press F/f to select the age restriction or “None” (for unrestricted watching),

then press .

3Press RETURN.

PIN Code To set your PIN for the first time

1Press the number buttons to enter the new PIN Code.

2Press RETURN.

To change your PIN

1Press the number buttons to enter your existing PIN Code.

2Press the number buttons to enter the new PIN Code.

3Press RETURN.

• PIN Code 9999 is always accepted.

Technical Set-up Auto Service

Update

Enables the unit to detect and store new digital services as

they become available.

• For the service update to be able to take place the unit should be left in standby

mode from time to time.

37 GB

Using MENU Functions

Software

Download

Enables the unit to automatically receive software updates

free through your existing aerial/cable (when issued). We

recommend that you leave the setting to “On” at all times.

If you do not want your software to be updated, set this

option to “Off.”

• For the software upgrade to be able to take place the unit should be left in standby

mode from time to time.

System

Information

Displays the current software version and the signal level.

• If signal bar is red (no signal) or amber (low signal), check the aerial/cable

connection.

Time Zone Allows you to manually select the time zone you are in, if it is

not the same as the default time zone setting for your country.

Auto DST Sets whether or not to automatically switch between summer

time and winter time.

On Automatically switches between summer

time and winter time according to the

calendar.

Off The time is displayed according to the

time difference set by “Time Zone.”

CA Module Set-up Allows you to access a pay TV service once you obtain a Conditional Access

Module (CAM) and a view card. See page 25 for the location of the

(PCMCIA) socket.

38 GB

Navigating through Monitor Home Menu

For setting the menu of the monitor, switch to the monitor mode by pressing MONITOR HDMI on

the remote.

1Press HOME.

The monitor Home menu appears on the screen.

2Press F/f to select the item, then press .

3Follow the instructions on the screen.

4Press HOME to exit.

• The options you can adjust vary depending on the situation.

• Unavailable options are greyed out or not displayed.

Monitor Menu

Picture

Sound

Screen

HDMI Set-up

Monitor Set-up

PC Settings

39 GB

Using MENU Functions

Picture

Picture Adjustment Picture Mode Selects the picture mode except for PC input source. “Picture

Mode” includes options best suited for video and

photographs, respectively. The options that can be selected

differ depending on the input source.

Vivid For enhanced picture contrast and

sharpness.

Standard For standard picture. Recommended for

home entertainment.

Cinema For viewing film-based content. Most

suitable for viewing in a theatre-like

environment.

Custom Allows you to store your preferred

settings.

Photo-Vivid For viewing photographs. Enhances

picture contrast and sharpness.

Photo-Standard For viewing photographs. Provides the

optimum picture quality for viewing in

the home.

Photo-Original For viewing photographs. Represents the

picture quality used when imaging

developed photographs.

Photo-Custom Allows you to store your preferred

settings.

Reset Resets all picture settings except “Picture Mode” to the

factory settings.

Backlight Adjusts the brightness of the backlight.

Contrast Increases or decreases picture contrast.

Brightness Brightens or darkens the picture.

Colour Increases or decreases colour intensity.

Hue Increases or decreases the green and red tones.

• “Hue” can only be adjusted for an NTSC colour signal (e.g.,

U.S.A. video tapes).

Colour

Temperature

Adjusts the whiteness of the picture.

Cool Gives the white colours a blue tint.

Neutral Gives the white colours a neutral tint.

Warm 1/Warm 2 Gives white colours a red tint. “Warm 2”

gives a redder tint than “Warm 1.”

• “Warm 1” and “Warm 2” are not available when “Picture

Mode” is set to “Vivid” (or “Photo-Vivid”).

Sharpness Sharpens or softens the picture.

(Continued)

40 GB

Noise Reduction Reduces the picture noise (snowy picture) in a weak

broadcast signal.

Auto Automatically reduces the picture noise

(in analogue mode only).

High/Medium/

Low

Modifies the effect of the noise reduction.

Off Turns off the “Noise Reduction” feature.

MPEG Noise

Reduction

Reduces picture noise in MPEG-compressed videos. This is

effective when viewing a DVD or digital broadcast.

Advanced

Settings

Allows you to set “Picture” settings in more detail. These

settings are not available when “Picture Mode” is set to

“Vivid” (or “Photo-Vivid”).

Reset Resets all the advanced settings to the

factory settings.

Black Corrector Enhances black areas of the picture for

stronger contrast.

Adv. Contrast

Enhancer

Automatically adjusts “Backlight” and

“Contrast” to the most suitable settings

judging from the brightness of the screen.

This setting is especially effective for

dark images scenes. It will increase the

contrast distinction of the darker picture

scenes.

Gamma Adjusts the balance between light and

dark areas of the picture.

Clear White Emphasises white and light colours.

Colour Space Changes the colour reproduction gamut.

“Wide” reproduces the vivid colour and

“Standard” reproduces the standard

colour.

Live Colour Makes colours more vivid.

White Balance Adjusts the colour temperature in detail.

• “Live Colour” is not available when “Colour Space” is set

to “Standard.”

Motionflow Provides smoother picture movement and reduces picture blur.

High Provides smoother picture movement such as for film-based

contents.

Standard Provides smooth picture movement. Use this setting for

standard use.

Off Use this setting when the “High” and “Standard” settings

result in noise.

• Depending on the video, you may not see the effect visually, even if you have

changed the setting.

41 GB

Using MENU Functions

• Some options are not available in PC/HDMI PC input mode.

Film Mode Provides an improved picture quality which is optimised for film when playing

DVD images taken on film.

Auto 1/Auto 2 “Auto 1” provides smoother picture movement than the

original film-based content. “Auto 2” provides the original

film-based content as is.

Off Turns off the “Film Mode” feature.

• If the image contains irregular signals or too much noise, “Film Mode” will be

automatically turned off even if “Auto 1/Auto 2” is selected.

• “Film Mode” is not available when “Video/Photo” is set to “Photo” or when

photograph is detected if “Video-A” is set.

Game Mode Provides the optimum screen for viewing images with fine lines and characters that

are input from video game equipment and PCs. Set to “On” for the sharp display of

fine lines or characters.

Video/Photo Provides suitable image quality by selecting the option depending on the input

source (video or photograph data).

Video-A Sets suitable image quality, depending on the input source,

video data or photograph data when directly connecting Sony

HDMI output-capable equipment that supports “Video-A”

mode.

Video Produces suitable image quality for moving pictures.

Photo Produces suitable image quality for still images.

• The setting is fixed to “Video” when “Video-A” mode is not supported on the

connected equipment, even if “Video-A” is selected.

• Only available for HDMI 1, HDMI 2, HDMI 3, MONITOR HDMI and

Component in format 1080i or 1080p.

Sound

Sound Mode Selects the sound mode.

Dynamic Enhances the treble and bass sounds.

Standard For standard sounds.

Clear Voice Makes voice sound clearer.

Reset Resets all the sound settings to the factory settings excluding “Dual Sound.”

Treble Adjusts higher-pitched sounds.

Bass Adjusts lower-pitched sounds.

Balance Emphasises left or right speaker balance.

Surround S-FORCE Front

Surround

Provides a virtual surround sound experience made possible

using just two front speakers.

Off Selects for normal stereo or mono reception.

Voice Zoom Adjusts the sound level of human voices. For example, if the voice of a news

announcer is indistinct, you can turn up this setting to make the voice louder.

Conversely, if you are watching a sports programme, you can turn down this

setting to soften the voice of the commentator.

Sound Booster Produces a fuller sound for more impact, by emphasising the treble and bass

sounds.

(Continued)

42 GB

• Some options are not available when “Speaker” is set to “Audio System” or headphones are connected.

This is used to set the “Control for HDMI” compatible equipment connected to the HDMI sockets.

Note that the interlock setting must also be made on the connected “Control for HDMI” compatible

equipment side.

Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g., adverts

tend to be louder than programmes).

Volume Offset Adjusts the volume level of the current input relative to other inputs.

Screen

Screen Format See “To change the screen format manually” on page 21.

Auto Format Automatically changes the screen format according to the input signal. To keep

your setting, select “Off.”

4:3 Default Selects the default screen format for use with 4:3 broadcasts.

Smart Displays conventional 4:3 broadcasts with an imitation wide

screen effect.

4:3 Displays conventional 4:3 broadcasts in the correct

proportions.

Off Keeps the current “Screen Format” setting when the channel

or input is changed.

Display Area Adjusts the picture display area in 1080i/p and 720p sources when “Screen

Format” is set to “Wide.”

Full Pixel Displays pictures in their original size if the input source is

1080i/p.

Normal Displays pictures in their recommended size.

-1/-2 Enlarges the picture to hide the edges of the picture.

Horizontal Shift Adjusts the horizontal position of the picture.

Vertical Shift Adjusts the vertical position of the picture when “Screen Format” is set to “Zoom.”

Vertical Size Adjusts the vertical size of the picture when “Screen Format” is set to “Smart” or

“Zoom.”

HDMI Set-up

Control for HDMI This sets whether to interlock the “Control for HDMI” compatible equipment and

the unit. When set to “On”, the following menu items can be performed. However,

power consumption in standby mode is higher than usual.

Auto Devices Off When this is set to “On”, the “Control for HDMI” compatible equipment turns off

when you switch the unit to standby mode using the remote.

Auto TV On When this is set to “On” and if the connected HDMI, control compatible

equipment is turned on, the unit automatically turns on, and the displays the HDMI

input from the connected equipment.

Device List Update Creates or updates the “HDMI Device List.” Up to 14 “Control for HDMI”

compatible equipment can be connected, and up to 4 equipment can be connected

to a single socket. Be sure to update the “HDMI Device List” when you change the

“Control for HDMI” compatible equipment connections or settings. Select them

manually one by one until getting a correct picture for several seconds.

HDMI Device List Displays the connected “Control for HDMI” compatible equipment.

43 GB

Using MENU Functions

Monitor Set-up

Power Saving Reduces the power consumption by adjusting the backlight brightness. This also

enhances the black level. Select from “Off”, “Low”, “High” and “Picture Off”.

Light Sensor On Automatically optimises the picture settings according to the

ambient light in the room.

Off Turns off the “Light Sensor” feature.

• Be sure not to put anything over the sensor, as its function may be affected. See

page 18 for the location of the light sensor.

Product Information Displays your monitor’s product information.

Remote Control Set-

Registers a remote to the unit, otherwise the remote cannot be used with the unit.

Instruction screens appear if you register or delete a remote. Follow the

instructions to register or delete.

• The remote can only be registered to only one unit.

Wireless Channel

Set-up

Wireless

Channel

Selection

Selects a wireless channel from “Auto”, “36ch”, “40ch”,

“44ch” or “48ch”.

If the wireless channel is uncertain, select “Auto” to search

an available channel.

Wireless

Information

Displays information about the current wireless channel and

link level.

Language Selects the language in which the menus are displayed.

Logo Illumination Lights up and turns off the Sony logo on the front of the monitor.

PC Settings

Screen Format Selects a screen format for displaying input from your PC.

Normal Displays the picture in its original size.

Full 1 Enlarges the picture to fill the vertical display area, keeping

its original horizontal-to-vertical aspect ratio.

Full 2 Enlarges the picture to fill the display area.

Reset Resets the PC screen settings to the factory settings.

Horizontal Shift Adjusts the horizontal position of the picture.

Vertical Shift Adjusts the vertical position of the picture.

44 GB

Additional Information

Installing the Accessories (Wall-Mount Bracket)

To Customers:

For product protection and safety reasons, Sony strongly recommends that installing of your

monitor be performed by Sony dealers or licenced contractors. Do not attempt to install it yourself.

To Sony Dealers and Contractors:

Provide full attention to safety during the installation, periodic maintenance and examination of this

product.

Your monitor can be installed using the Wall-Mount Bracket SU-WL500/SU-WL700 (sold

separately). For SU-WL500, install as illustrated below. For SU-WL700, see the manual supplied

with SU-WL700.

• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the

installation.

• Refer to “Detaching the Table-Top Stand from the Monitor” (page 11).

• Refer to “Monitor installation dimensions table” (page 45).

• Refer to “Screw and Hook locations diagram/table” (page 45).

Sufficient expertise is required for installing this product, especially to determine the strength of the wall for

withstanding the monitor’s weight. Be sure to entrust the attachment of this product to the wall to Sony

dealers or licenced contractors and pay adequate attention to safety during the installation. Sony is not liable

for any damage or injury caused by mishandling or improper installation.

Screw

(+PSW6 × 16)

Mounting

Hook

Square hole

Screw

45 GB

Additional Information

Unit: mm

Figures in the above table may differ slightly depending on the installation.

The wall that the monitor will be installed on should be capable of supporting a weight of at least four times

that of the monitor. Refer to “Specifications” on page 46 for its weight.

* Hook position “a” and “c” cannot be used for the models in the table above.

Monitor installation dimensions table

Model Name

Display dimensions Screen centre

dimension

Length for each mounting angle

Angle (0°) Angle (20°)

AB C DEFGH

KDL-52EX1 1,312 806 80 486 114 351 765 508

KDL-46EX1 1,156 709 107 464 110 321 674 486

KDL-40EX1 1,024 635 144 464 110 296 604 486

Screw and Hook locations diagram/table

Model Name Screw location Hook location

KDL-52EX1/46EX1/40EX1 e, j b

320

Screen centre point

WARNING

Screw location Hook location

46 GB

Specifications

Media receiver

Model name MBT-W1

System

TV system Analogue: Depending on your country selection: B/G/H, D/K, L, I

Digital: DVB-T/DVB-C

Colour/video system Analogue: PAL, SECAM NTSC 3.58, 4.43 (only Video In)

Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC HP@L4.0, MP@L3.0

Channel coverage Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41

D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69

Digital: VHF/UHF

Input/Output jacks

Aerial 75 ohm external terminal for VHF/UHF

/ AV1 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input and unit

audio/video output.

AV2 Video input (phono jack)

AV2 Audio input (phono jacks)

DIGITAL AUDIO OUT (OPTICAL)(digital optical jack)

COMPONENT IN Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i

Y: 1 Vp-p, 75 ohms, 0.3V negative sync

PB/CB: 0.7 Vp-p, 75 ohms

PR/CR: 0.7 Vp-p, 75 ohms

COMPONENT IN Audio input (phono jacks)

500 mVrms

HDMI IN 1, 2, 3 Video: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i

Audio: Two channel linear PCM

32, 44.1 and 48 kHz, 16, 20 and 24 bits

PC Input (see page 48)

PC IN PC Input (D-sub 15-pin)

G: 0.7 Vp-p, 75 ohms, non Sync on Green

B: 0.7 Vp-p, 75 ohms, non Sync on Green

R: 0.7 Vp-p, 75 ohms, non Sync on Green

HD: 1-5 Vp-p

VD: 1-5 Vp-p

PC audio input (minijack)

IR BLASTER 3.5 mm minijack

CAM (Conditional Access Module) slot

iHeadphones jack

USB port

Power and others

Power requirements Mains adaptor: 100-240 V AC, 50/60 Hz

Media receiver: DC18V

Power consumption 20 W

Standby power consumption* 3.5 W or less (19 W when Quick Start is ON)

Dimensions

(Approx.)

(w × h × d)

for vertical

placement with

stand

13.1 × 30.2 × 28.6 cm

for horizontal

placement

28.0 × 7.2 × 28.6 cm

Mass (Approx.) for vertical

placement with

stand

2.5 kg

for horizontal

placement

2.4 kg

47 GB

Additional Information

Monitor

* Specified standby power is reached after the unit finishes necessary internal processes.

Model name LDM-E521 LDM-E461 LDM-E401

System

Panel system LCD (Liquid Crystal Display) Panel

Sound output 8 W + 8 W

Input/Output jacks

MONITOR HDMI IN Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i

Audio: Two channel linear PCM

32, 44.1 and 48 kHz, 16, 20 and 24 bits

PC Input (see page 48)

Power and others

Power requirements 220–240 V AC, 50 Hz

Screen size (measured diagonally) 52 inches (Approx. 132.2 cm) 46 inches (Approx. 116.8 cm) 40 inches (Approx. 101.6 cm)

Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)

Power

consumption

in “Home”/

“Standard” mode

295 W 220 W 180 W

in “Shop”/“Vivid”

mode

324 W 247 W 221 W

Standby power consumption* 0.5 W or less (19 W when Quick Start is ON)

Dimensions

(Approx.)

(w × h × d)

with Table-Top

Stand

131.2 × 83.9 × 34.4 cm 115.6 × 74.2 × 25.5 cm 102.4 × 66.8 × 25.5 cm

without Table-Top

Stand

131.2 × 80.6 × 5.7 cm 115.6 × 70.9 × 5.7 cm 102.4 × 63.5 × 5.7 cm

Mass (Approx.) with Table-Top

Stand

43.0 kg 26.0 kg 24.0 kg

without Table-Top

Stand

33.0 kg 19.0 kg 17.0 kg

Supplied accessories See “1: Checking the unit and accessories” on page 4.

Optional accessories SU-WL500/SU-WL700 Wall-Mount Bracket

Wireless system

Transmission system OFDM

Carrier frequency 5.15 to 5.25 GHz

Transmission distance 30 cm to 20 m (depending on installation / usage)

(Continued)

48 GB

PC Input Signal Reference Chart for PC

• This unit’s PC input does not support Sync on Green or Composite Sync.

• This unit’s PC input does not support interlaced signals.

• This unit’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals,

you will see the message “No signal.”

PC Input Signal Reference Chart for HDMI IN 1, 2, 3

Resolution

Signals Horizontal

(Pixel)

×Vertical (Line) Horizontal

frequency (kHz)

Vertical

frequency (Hz)

Standard

VGA 640 ×480 31.5 60 VGA

640 × 480 37.5 75 VESA

720 × 400 31.5 70 VGA-T

SVGA 800 ×600 37.9 60 VESA Guidelines

800 × 600 46.9 75 VESA

XGA 1024 ×768 48.4 60 VESA Guidelines

1024 × 768 56.5 70 VESA

1024 × 768 60.0 75 VESA

WXGA 1280 ×768 47.4 60 VESA

1280 ×768 47.8 60 VESA

1280 × 768 60.3 75

1360 ×768 47.7 60 VESA

SXGA 1280 ×1024 64.0 60 VESA

Resolution

Signals Horizontal

(Pixel)

×Vertical (Line) Horizontal

frequency (kHz)

Vertical

frequency (Hz)

Standard

VGA 640 × 480 31.5 60 VGA

SVGA 800 × 600 37.9 60 VESA Guidelines

XGA 1024 × 768 48.4 60 VESA Guidelines

WXGA 1280 × 768 47.4 60 VESA

WXGA 1280 × 768 47.8 60 VESA

SXGA 1280 × 1024 64.0 60 VESA

49 GB

Additional Information

Troubleshooting

Check whether the 1 (standby) indicator is flashing in red.

When it is flashing

The self-diagnosis function is activated.

1Count how many 1 (standby) indicator flashes between each two second break.

For example, the indicator flashes three times, then there is a two second break, followed by

another three flashes, etc.

2Press 1 on the unit to turn it off, disconnect the mains lead, and inform your dealer or Sony

service centre of how the indicator flashes (number of flashes).

When it is not flashing

1Check the items in the tables below.

2If the problem still persists, have your unit serviced by qualified service personnel.

Condition Explanation/Solution

Picture

No picture (screen is dark) and

no sound • Check the aerial/cable connection.

• Connect the unit to the mains, and press 1 on the unit.

• If the 1 (standby) indicator lights up in red, press TV "/1.

No picture or no menu

information from equipment

connected to the scart

connector

• Press / to display the connected equipment list, then select the

desired input.

• Check the connection between the optional equipment and the unit.

Double images or ghosting

(only in analogue mode)

• Check the aerial/cable connection.

• Check the aerial location and direction.

Only snow and noise appear

on the screen (only in

analogue mode)

• Check if the aerial is broken or bent.

• Check if the aerial has reached the end of its serviceable life (three to

five years in normal use, one to two years at the seaside).

Picture or sound noise when

viewing a TV channel (only in

analogue mode)

• Adjust “AFT” (Automatic Fine Tuning) to obtain better picture

reception (page 34).

Some tiny black points and/or

bright points appear on the

screen

• The picture of a display unit is composed of pixels. Tiny black points

and/or bright points (pixels) on the screen do not indicate a malfunction.

No colour on programmes • Select “Reset” (page 39).

No colour or irregular colour

when viewing a signal from

the / COMPONENT

IN sockets

• Check the connection of the / COMPONENT IN sockets and

check if each sockets are firmly seated in their respective sockets.

Picture freezes or contains

blocks on the screen • Check signal level (page 37). If signal bar is red (no signal) or amber

(low signal), check the aerial/cable connection.

• Remove the connected USB device. It can be damaged or not supported

by the unit.

Check the website below for updated information about compatible USB

devices:

http://support.sony-europe.com/TV/compatibility/

Sound

No sound, but good picture • Press 2 +/– or % (Mute).

• Check if the “Speaker” is set to “TV Speaker” (page 32).

• When using HDMI input with Super Audio CD or DVD-Audio,

DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.

(Continued)

50 GB

Channels

The desired channel cannot be

selected • Switch between digital and analogue mode and select the desired digital/

analogue channel.

Some channels are blank • Scrambled/Subscription only channel. Subscribe to the pay TV service.

• Channel is used only for data (no picture or sound).

• Contact the broadcaster for transmission details.

Digital channels are not

displayed

• Contact a local installer to find out if digital transmissions are provided

in your area.

• Upgrade to a higher gain aerial.

Wireless communication

Delay pictures • Wireless communication takes time to establish after turning the power

on. About 20 seconds are needed to display pictures. Selecting “Quick

Start” may shorten the waiting time (page 30).

“Wireless communication in

progress.” does not disappear,

or “Wireless communication

failed.” is displayed

• When the wireless communication is disturbed, it takes about 15 seconds

to display pictures again. “Wireless communication in progress.” is

displayed until pictures come back.

•

Check the installation situation of the monitor and media receiver (page 4).

• Check whether wireless equipment using the same radio frequency as

this unit is working near by, or something disturbing wireless

communication of this unit is close to the unit. In such cases, keep such

equipment away from the unit or turn off the power of that equipment.

Noisy or interrupted picture or

sound •

Check the installation situation of the monitor and media receiver (page 4).

• Pictures may be distorted if somebody walks across between the monitor

and media receiver.

• Check whether wireless equipment using the same radio frequency as

this unit is working near by, or something disturbing wireless

communication of this unit is close to the unit. In such cases, keep such

equipment away from the unit or turn off the power of that equipment.

General

Distorted picture and/or sound • Keep the unit away from electrical noise sources such as cars,

motorcycles, hair-dryers or optical equipment.

• When installing optional equipment, leave some space between the

optional equipment and the unit.

• Check the aerial/cable connection.

• Keep the aerial/cable TV cable away from other connecting cables.

The unit turns off

automatically (the unit enters

standby mode)

• Check if the “Sleep Timer” is activated, or confirm the “Duration”

setting of “On Timer Settings” (page 30).

• If no signal is received and no operation is performed in the TV mode

for 10 minutes, the monitor automatically switches to standby mode.

The unit turns on

automatically • Check if the “On Timer” is activated (page 30).

Some input sources cannot be

selected • Select “AV Preset” and cancel “Skip” of the input source (page 32).

The remote does not function • Replace the batteries.

A channel cannot be added to

the Favourite list • Up to 999 channels can be stored in the Favourite list.

HDMI equipment does not

appear on “HDMI Device List”

• Check that your equipment is “Control for HDMI” compatible

equipment.

Not all channels are tuned • Check support web site for cable provide information.

http://support.sony-europe.com/TV/DVBC/

You cannot select “Off” in

“Control for HDMI” • If any “Control for HDMI” compatible audio equipment is connected to

the unit, you cannot select “Off” in this menu. If you want to change the

audio output to the monitor speaker, select “TV Speaker” in the

“Speaker” menu (page 32).

The “Store Display Mode: On”

message appears on the screen

• Select “All Reset” in the “Media Receiver Set-up” menu (page 33).

Condition Explanation/Solution

Printed in Spain

4-115-568-12(1)

For useful information about Sony products

KDL-52EX1/KDL-46EX1/KDL-40EX1

4-115-568-12(1)

KDL-52EX1/KDL-46EX1/KDL-40EX1

4-115-568-12(1)

LCD Digital Colour TV

Operating Instructions

KDL-52EX1

KDL-46EX1

KDL-40EX1

Sony Bravia 4 115 568 121 Users Manual KDL 40EX1/KDL 46EX1/KDL 52EX1

4-115-568-12 to the manual 55872775-6f3b-4c91-aa42-58e61e553661

Navigation menu

Versions of this User Manual:

Views

Navigation