Sony Dcr Vx1000 Operation Manual

DCR-VX1000 Operation Manual DCRVX1000

User manual DCRVX1000 Sony DCR-VX1000 Digital Camcorder User Manuals and Instruction Guides

Sony DCR-VX1000 Camcorder Operating Guide docget Troubleshoot Sony DCR-VX1000 Camcorder |

DCR-VX1000 - Operation Manual DCRVX1000 Free User Guide for Sony DCR Series Camcorder, Manual - page3

2015-08-20

: Sony Sony-Dcr-Vx1000-Operation-Manual-796858 sony-dcr-vx1000-operation-manual-796858 sony pdf

Open the PDF directly: View PDF .
Page Count: 88

Download
Open PDF In Browser	View PDF

3-798-762-24 (1)

Digital Video
Camera
Recorder
Operation Manual
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.

Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No. DCR-VX1000

Model No. AC-V615

Serial No.

DCR-VX1000
 1995 by Sony Corporation

English

Welcome to digital video
Congratulations on your purchase of this Sony Digital Handycam camcorder. With your Handycam,
you can capture life’s precious moments with superior picture and sound quality. Your Handycam is
loaded with advanced features, but at the same time it is very easy to use. You will soon be producing
home video that you can enjoy for years to come.

WARNING
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.

This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.

DISPOSAL OF LITHIUM ION BATTERY.
LITHIUM ION BATTERY.
DISPOSE OF PROPERLY.
You can return your unwanted lithium ion batteries
to your nearest Sony Service Center or Factory
Service Center.
Note: In some areas the disposal of lithium ion
batteries in household or business trash may
be prohibited.
For the Sony Service Center nearest you call 1-800222-SONY (United States only)
For the Factory Service Center nearest you call 416499-SONY (Canada only)
Caution: Do not handle damaged or leaking lithium
ion battery.

For Customers in the U.S.A.
WARNING
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.

CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
The shielded interface cable recommended in this
manual must be used with the equipment in order to
comply with the limits for a digital device pursuant
to Subpart B of Part 15 of FCC Rules.

For customers in CANADA
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.

As you read through this manual, buttons and
settings on the camcorder are shown in capital
letters.
e.g. Set the POWER switch to CAMERA.
The beep sound is indicated with
in the
illustrations.

Table of Contents
Before You Begin
Notes and Precautions 4
Checking Supplied Accessories

Getting Started
Charging and Inserting the Battery Pack 6
Inserting a Cassette 9

Basic Operations
Camera Recording 10
Hints for Better Shooting 13
Checking the Recorded Picture
Connections for Playback 15
Playing Back a Tape 16

Advanced Operations
Using Alternate Power Sources 18
Changing the Mode Settings 20
< for Camera Recording >
Fader and Overlap 23
Re-recording a Picture in the Middle of a Recorded Tape
Photo Recording 27
Interval Recording 28
Cut Recording 29
Self-timer Recording 30
< for Automatic/Manual Adjustment >
Selecting Automatic Mode and Manual Adjustment 31
Focusing Manually 32
Using the PROGRAM AE Function 34
Adjusting the Exposure 38
Adjusting the Shutter Speed 40
Using the ND Filter 41
Using with the Zebra Pattern 42
Adjusting the White Balance 43
Adjusting the Recording Sound 46
Releasing the Steady Shot Function 48
Presetting the Adjustment for Picture Quality 49
< for Playback/Editing >
Searching the Recorded Picture 51
Checking the Information for the Recorded Picture 53
Editing onto Another Tape 54
Replacing Recording on a Tape 56

Additional Information
Using Your Camcorder Abroad 57
Replacing the Lithium Battery in the Camcorder
Resetting the Date and Time 60
Video Cassettes 61
Tips for Using the Battery Pack 63
Maintenance Information and Precautions 65
Trouble Check 68
Specifications 71
Identifying the Parts 72
Warning Indicators 82
Glossary 83
Index (back cover)

Before You Begin

Notes and Precautions
Note on TV Color Systems
TV color systems differ from country to country. To view your recordings on a TV, you need an NTSC
system based TV. Please check the list to see the TV color system of your country (p. 57).

Precaution on Copyright
Television programs, films, video tapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provision of the copyright laws.

Precautions on Camcorder Care
• Do not let the camcorder get wet. Keep the camcorder from rain or sea water. It may cause a
malfunction and sometimes the malfunction cannot be repaired. [a]
• Do not let sand get into the camcorder. When you use the camcorder on a sandy beach or
dusty place, protect it from the sand or dust. Sand or dust may cause the unit to malfunction
and sometimes the malfunction cannot be repaired. [b]
• Never leave the camcorder under temperatures above 140 °F (60° C), such as in a car parked in the
sun or under direct sunlight. [c]

[a]

[b]

[c]

Contents of the recording cannot be compensated if recording or playback is not made due to a
malfunction of the camcorder, video tape, etc.
See “Precautions” as well (p. 67).

Checking Supplied Accessories
Check that the following accessories are supplied with your camcorder.

Before You Begin

1 Wireless Remote Commander (1) (p. 76)
2 NP-720/F730 Battery Pack (1) (p.6)
3 AC-V615 AC power adaptor and DK-715 connecting cord (1) (p. 6)
4 A/V connecting cable (1) (p. 15)
5 S video connecting cable (1) (p. 15)
6 Shoulder strap (1) (p. 76)
7 R6 (size AA) batteries for Remote Commander (2) (p. 77)
8 Eyecup (1) (p. 11)
9 Mini DV cassette (1) (p. 9)

Getting Started

Charging and Inserting the Battery Pack
Before using your camcorder, you first need to charge and install the battery pack. To charge the
battery pack, use the supplied AC power adaptor.
This digital camcorder does not interface with "InfoLITHIUM" batteries. The remaining time (minutes)
indication does not appear when using "InfoLITHIUM" batteries.

Charging the Battery Pack
Charge the battery pack on a flat place without vibration.
(1) Connect the AC power adaptor to a wall outlet.
(2) Align the surface of the battery pack indicated by the z mark with the edge of the terminal shutter
of the AC power adaptor. Then fit and slide the battery pack in the direction of the arrow.
The CHARGE lamp (orange) lights up. Charging begins.
When charging is completed, the CHARGE lamp goes out. Unplug the unit from the wall outlet, then
remove the battery pack and install it on the camcorder.

Charging Time
Battery Pack

Charging time*

NP-720/F730

190

* Approximate minutes to charge an empty pack using the supplied AC power adaptor (Lower temperatures
require a longer charging time.)

Battery Life
Battery Pack

Typical recording time*

Continuous using time**

NP-720/F730

105

* Approximate minutes when recording while you repeat recording start/stop, zooming and turning the
power on/off. The actual battery life may be shorter.
** Approximate continuous recording and playing back time indoors.

Removing the Battery Pack
Slide the battery pack in the direction of the arrow.

Getting Started

Notes on charging the battery pack
• The POWER lamp will remain lit for a while even if the battery pack is removed and the power cord is
unplugged after charging the battery pack. This is normal.
• If the POWER lamp does not light, disconnect the AC power cord. After about one minute, reconnect the
AC power cord again.
• You cannot operate the camcorder using the AC power adaptor while charging the battery pack.
• When a fully charged battery pack is installed, the CHARGE lamps will light once, then go out.

Inserting the Battery Pack
(1) Slide OPEN and open the battery cover.
(2) Insert the battery pack until it is hooked by the RELEASE knob.
(3) Close the cover.

OPEN

Charging and Inserting the Battery Pack
To Remove the Battery Pack
Slide the RELEASE knob leftward.

RELEASE

Note on battery pack
You cannot use NP-520/500H/F750 battery pack.

Inserting a Cassette

and

Getting Started

You can use mini DV cassette with
logo* only.
Make sure that a power source is inserted.
(1) Slide EJECT. The cassette compartment automatically lifts up and opens.
(2) Insert a cassette (supplied) with the window facing out.
(3) Press the outside of the cassette compartment cover to close the compartment. The cassette
compartment automatically retracts.
(4) After the cassette compartment cover has retracted, press the upper cassette compartment cover
until it clicks.
are trademarks.

EJECT

To Eject the Cassette
Slide EJECT. After the cassette compartment opens, take out the cassette.
You cannot eject the cassette while C MEMORY appears in the viewfinder because the camcorder is
still writing information to the mini DV cassette-mounted cassette memory (p. 83). In this case, the
cassette compartment automatically lifts up and opens after C MEMORY disappears.

To Prevent Accidental Erasure
Slide and open the tab on the cassette to expose the red mark. If you try to record with the red mark
exposed, the
and 6 indicators flash in the viewfinder, and you cannot record on the tape. To
rerecord on this tape, slide and close the tab to cover the red mark.
ˇ

Basic Operations

Camera Recording
Make sure that a power source and a cassette are inserted. You can hear the beep sound, indicated
with
in the illustrations, which confirms your operation. Before you record one-time events, you
may want to make a trial recording to make sure that you are using the camcorder correctly.
(1) Remove the hood cap, and attach it to the grip strap.
(2) While pressing the centre button on the POWER switch, set it to CAMERA.
(3) Turn STANDBY up.
(4) Press START/STOP. The camcorder starts recording. The “REC” indicator appears in the
viewfinder, and the red lamps on the front and back of the camcorder and in the viewfinder light.

1
3

STBY

LOCK
STANDBY
PHOTO STANDBY

POWER
CAM

REC

A
ER

LOCK
STANDBY
PHOTO STANDBY

OF
F

When ND ON flashes in the viewfinder
Set ND FILTER to ON.

To Stop Recording Momentarily [a]
Press START/STOP again. The “STBY” indicator appears in the viewfinder (Standby mode).

To Finish Recording [b]
Press START/STOP to stop recording. Turn the POWER switch to OFF. Then, eject the cassette and
battery (p. 8, 9).

[a]

STBY
LOCK

LOCK

STANDBY
PHOTO STANDBY

0:05:20

[b]

LOCK

STANDBY

PHOTO STANDBY

Note on Standby mode
If you leave the camcorder for 5 minutes or more with a cassette inserted in Standby mode, the camcorder
goes off automatically. This prevents wearing down the battery and wearing out the tape. To resume
Standby mode, turn the POWER switch to OFF once and then to CAMERA. To start recording, press START/
STOP.
Notes on the time code
• The time code indicates the recording or playback time, "0:00:00" (hours : minutes : seconds) in the
viewfinder and "0:00:00:00" (hours : minutes : seconds : frames) on the TV screen. This camcorder uses the
drop frame mode (p. 84).
• Be sure not make a blank portion when recording, because the time code will start from “0:00:00:00” again.
You cannot rewrite the time code on the tape if there is a blank portion between pictures.

To Focus the Viewfinder Lens

STBY

Basic Operations

If the viewfinder is not in focus at all or when you use the camcorder after someone else has used it,
focus the viewfinder lens. Turn the viewfinder lens adjustment ring so that the indicators in the
viewfinder come into sharp focus.

When the shooting condition is too bright
Use the supplied large eyecup. Fit it onto the camcorder by stretching the corners a little. [a]
If you wear glasses or you cannot view the corners
Fold back the eyecup to see better. [b]

[a]

[b]

Note on beep sound
As indicated with
in the illustrations, a beep sounds when you turn the power on or when you start
recording and two beeps sound when you stop recording, confirming the operation. Several beeps also sound
as a warning of any unusual condition of the camcorder (p. 82). Note that the beep sound is not recorded on
the tape. If you do not want to hear the beep sound, set the BEEP to OFF in the menu system (p. 20).
To record through an external microphone
Connect a microphone to the MIC jack. In this case, sound from the built-in microphone will not be recorded.
If no cassette is inserted while using a monaural microphone, you cannot monitor the left side sound from the
headphones jack or audio output jack.
Note on color viewfinder
The color viewfinder employs an LCD screen made with high-precision technology.
However, black points or bright points of light (red, blue or green) may appear constantly on the color
viewfinder screen. These points are not recorded on the tape. This is not a malfunction.
(Effective dots: more than 99.99%)

Camera Recording
Using the Zoom Feature
Zooming is a recording technique that lets you change the size of the subject in the scene. For more
professional-looking recordings, use the zoom sparingly.
T side: for telephoto (subject appears closer)
W side: for wide-angle (subject appears farther away)

Zooming Speed
Press the zoom button firmly for high-speed zoom. Press it softly for relatively slow zooming.
Note on the focus range
You can shoot a subject that is at least about 2.6 feet (80 cm) in the telephoto position, 0.5 inch (1 cm) in the
wide position away from the lens surface.
Notes on Digital Zoom
• More than 10x zoom is performed digitally, and the picture quality deteriorates as you go toward the T
side. If you do not want to use the digital zoom, set the D ZOOM function to OFF in the menu system (p.
20).
• The horizontal bar in the power zoom indicator separates the digital zooming zone (above the bar [a]) and
the optical zooming zone (under the bar [b]). If you set the D ZOOM function to OFF, the part above the
bar disappears.

T
T

[a]
[b]

Hints for Better Shooting
For hand-held shots, you’ll get better results holding the camcorder according to the following
suggestions:
[a]

[b]

Basic Operations

• Hold the camcorder firmly and secure it with the grip strap so that you can easily manipulate the
controls with your thumb [a].
• Place your right elbow against your side.
• Place your left hand under the camcorder to support it.
• Keep your fingers away from the built-in microphone.
• Place your eye firmly against the viewfinder eyecup.
• Use the viewfinder frame as a guide to determine the horizontal plane.
• You can record in a low position to get an interesting recording angle. Lift the viewfinder up to
record from a low position (you can turn it up to about 80 degrees.) [b]. In this case, it’s useful to use
REC START/STOP located under the carrying handle.
Cautions on the viewfinder
• Do not pick up the camcorder by the viewfinder. [c]
• Do not place the camcorder so as to point the viewfinder toward the sun. The inside of the viewfinder may
be deformed. Be careful in placing the camcorder under sunlight or by the window. [d]
• Do not point the lens toward the sun with a close -up lens attached. Doing so may damage the camcorder.

[c]

[d]

Place the camcorder on a flat surface or use a tripod
Try placing the camcorder on a table top or any other flat surface of suitable height. If you have a tripod for a
still camera, you can also use it with the camcorder. Make sure the tripod screw is shorter than 9/32 inch
(6.5 mm).

Checking the Recorded Picture
The editsearch function is used to view the recorded picture for a moment during recording.
Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the
viewfinder.
(1) While pressing the centre button on the POWER switch, turn it to CAMERA.
(2) Turn STANDBY up.
(3) Press the – (Œ) side of EDITSEARCH momentarily; the last few seconds of the recorded portion
plays back (Rec Review). You can also monitor the sound by using headphones (not supplied).
Hold down the – side of EDITSEARCH until the camcorder goes back to the scene you want. The last
recorded portion is played back. To go forward, hold down the + side (Editsearch).

POWER
CAM

A
ER

LOCK
STANDBY

OF
F

PHOTO STANDBY

EDITSEARCH

To begin rerecording
Press START/STOP. Provided you do not eject the cassette, the transition between the last scene you
recorded and the next scene you record will be smooth.
Note on editsearch function
You can view the recorded picture in the playback pause mode using the editsearch function even when the
POWER switch is turned to VIDEO.

Connections for Playback
You can use this camcorder as a VCR by connecting it to your TV for playback. It is recommended to
use the house current as the power source (p. 18).

Connecting Directly to a TV
Connect the camcorder to your TV by using the supplied A/V connecting cable. Set the TV/VCR
selector to VCR on the TV.
To get higher quality pictures in DV format, connect the camcorder to your TV using the S video cable.
If you are going to connect the camcorder using the S video cable [a], you do not need to connect the
yellow (video) plug of the A/V connecting cable [b].

S VIDEO IN

S VIDEO OUT [a]

VIDEO OUT [b] VIDEO IN
AUDIO OUT AUDIO IN

Basic Operations

: Signal flow

If a VCR is connected to the TV
Connect the camcorder to LINE IN on the VCR by using the supplied connecting cable. Set the input
selector on the VCR to LINE. Set the TV/VCR selector to VCR on the TV.

TV
S VIDEO OUT [a]
VIDEO
OUT [b]

S VIDEO IN

VCR

AUDIO OUT
VIDEO/AUDIO IN
: Signal flow

If your TV or VCR is monaural
Connect only the white plug for audio on the TV or the VCR. With this connection, the sound is
monaural, and the sound from the headphone jack on the camcorder is also monaural.
To connect a TV or a VCR without audio/video input jacks
Use an RFU adaptor (not supplied).

Playing Back a Tape
You can monitor the playback picture in the viewfinder. You can also watch it on a TV screen, after
connecting the camcorder to a TV or VCR (p. 15). You can control playback using the supplied Remote
Commander (p. 76).
(1) While pressing the center button on the POWER switch, turn it to VTR.
(2) Insert the recorded tape with the window facing out.
(3) Press 0 to rewind the tape.
(4) Press ·. Playback starts.

3
1

REW

F
OF

POWER
A
ER
M

PLAY

To stop playback, press π.
To fast-forward the tape, press ).
To monitor the sound while viewing the playback picture in the viewfinder
Connect headphones (not supplied) to the 2 jack (p. 75).

To mark the portion you want to monitor again
Press ZERO SET MEMORY while playing back.
After you finish playing back, press 0. The tape rewinds to the position you want (0:00:00) and stops.

Various Playback Modes
To view a still picture (playback pause)
Press P during playback. To resume playback, press P or ·. When still picture mode lasts for 5
minutes or more, the camcorder automatically enters stop mode. To playback again, press · again.
To locate a scene (Picture Search)
Keep pressing 0 or ) during playback. To resume normal playback, release the button.
To monitor the high-speed picture while advancing the tape or rewinding (Skip scan)
Keep pressing 0 while rewinding or ) while advancing the tape. To resume normal playback,
press ·.
To view the picture at 1/5 speed (Slow Playback)
Press < or > to select direction, then press & during playback. To resume normal playback, press
·. If slow playback lasts for about 1 minute, it shifts to normal speed automatically.
To view the picture at double speed
Press < or > to select direction, then press x2 on the Remote Commander during playback. To
resume normal playback, press ·.

To view the picture frame by frame
Press > during playback pause mode.
Press < in reverse direction during playback pause mode.
To view the picture in reverse direction
Press < during playback.
Notes on playback
• The sound is muted in the various playback modes.
• The previous scene may appear like mosaic noise during slow playback or playback pause. This is not a
malfunction.

Basic Operations

To display the indicators
Press DISPLAY (p. 76). Tape counter, remaining battery indicator and other indicators appear on the
connected TV screen. To erase the indicators, press DISPLAY again.

Advanced Operations

Using Alternate Power Sources
You can choose any of the following power sources for your camcorder: battery pack (p.6), house
current, and 12/24 V car battery. Choose the appropriate power source depending on where you want
to use your camcorder.
Place

Power source

Accessory to be used

Indoors

House current

AC power adaptor AC-V615 and connecting cord
DK-715 (supplied)

Outdoor

Battery pack

Battery pack NP-720/F730

In a car

12 V or 24 V car battery

DC pack DC-V515/V700

You cannot connect to this camcorder using the connecting cord supplied with AC-V615 or DC-V515/
V700. Use the connecting cord supplied with this camcorder.
This mark indicates that this product is an genuine accessory for Sony video products.
When purchasing Sony video products, Sony recommends that you purchase
accessories with this "GENUINE VIDEO ACCESSORIES" mark.
Note on power sources
Disconnecting the power sources or removing the battery pack during recording or playback may damage the
inserted tape. If this happens, restore the power supply again immediately.

Using the House Current
To use the supplied AC power adaptor:
(1) Connect the AC power cord to a wall outlet.
(2) Connect the camcorder and the AC power adaptor using the supplied connecting cord.

2
You can charge the battery inserted in the camcorder by connecting the AC power adaptor to the
camcorder and turning the power switch to OFF.
Charging time of the supplied NP-720/F730 battery pack is approx. 150 minutes. While charging, the
battery indicator appears repeatedly in the display window:
b➟∫➟B➟ı
After charging finishes, the indicator disappears.
You can also charge two batteries at a time by installing the battery pack and connecting the AC power
adaptor. It takes about 4 hours to charge the batteries.

WARNING
AC power cord must only be changed at qualified service shop.

Precautions
• The set is not disconnected from the AC power source as long as it is connected to the wall outlet,
even if the set itself has been turned off.
• To prevent accident from a short circuit, do not come into contact with the terminal inside the
shutter at the rear of the camcorder.
Notes on the POWER lamp
• The POWER lamp will remain lit for a while even if the unit is unplugged after use. This is normal.
• If the POWER lamp does not light, disconnect the AC power cord. After about one minute, try again.

Using a Car Battery
Use the DC-V515/V700 pack (not supplied). Connect the cord of the DC pack to the cigarette lighter
socket of a car (12 V or 24 V). Connect the DC pack in the same way as the AC power adaptor.
Use the connecting cord supplied with this camcorder.

Advanced Operations

Changing the Mode Settings
You can change the mode settings in the menu system to further enjoy the features and function of the
camcorder.
(1) Slide OPEN and open the battery cover.
(2) Press MENU to display the menu in the viewfinder.
(3) Press V or v to select the desired item, then press EXECUTE.
(4) Press V or v to select the desired mode, then press EXECUTE. If you want to change the other
modes, repeat steps 3 and 4.
(5) Press MENU to erase the menu display.

MENU
A SHUTTER
D ZOOM
ZEBRA

ON
A SHUTTER
D ZOOM
ZEBRA
COMMANDER
HEADPHONE
BEEP
EVF MODE

MENU
A SHUTTER
D ZOOM
ON
ZEBRA

[MENU]:END

EXECUTE

D ZOOM

ON
OFF

MENU
A SHUTTER
D ZOOM
ZEBRA ON

D ZOOM

ON
OFF

EXECUTE

A SHUTTER
OFF
D ZOOM
ZEBRA

ON
OFF

5
1

To display the menu on the TV screen
Connect the camcorder to your TV (page 15), and press MENU.
Note on the menu system
You may need to repeat step 3 before you select the desired mode because some items have three steps.

Setting the Mode of Each Item
Select RETURN to return to main menu (item select).

Items in CAMERA and VTR Modes
COMMANDER
• Normally select VTR4.
• Select OFF when not using the Remote Commander.
• Select ID when using the Remote Commander with the ID number set.
• Select ID SET to register the ID number using the same number as the Remote Commander.
To set the ID, see page 78.

HEADPHONE
• Normally select LOW.
• Select MID to slightly raise the volume of the headphone.
• Select HIGH to raise the volume of the headphone.
BEEP
• Normally select ON.
• Select OFF to turn the beep sound off.
EVF MODE
• Select this item and change the level of the indicator by pressing > or . to adjust the color intensity
and brightness of the picture in the viewfinder.
CLOCK SET
• Select this item to reset the date or time. See page 60.

Items in CAMERA Mode only
A SHUTTER
• Normally select ON.
• Select OFF when adjusting the shutter speed.
D ZOOM
• Select ON to activate digital zooming. The zooming ability becomes 20x.
• Select OFF otherwise. The zooming ability becomes 10x.
ZEBRA
• Normally select OFF.
• Select ON to shoot with the zebra pattern displayed in the viewfinder.
FRAME REC
• Normally select OFF.
• Select ON for cut recording.
When you remove the power source, the setting becomes OFF.
INT REC
• Normally select OFF. Select ON to make interval recording.
• Select INTERVAL to set or change the waiting time for interval recording.
• Select REC TIME to set or change the recording time for interval recording.
When you remove the power source, the setting becomes OFF, but the waiting time and recording time
are retained.

CUSTOM
• Normally select OFF. Select ON for camera recording based on the setting mode preset in the
CUSTOM menu.
• Select COLOR LV/SHARPNESS/WB SHIFT/AE SHIFT and change the level of the indicator by
pressing > or . to preset the color intensity (COLOR LV), sharpness (SHARPNESS), white balance
(WB SHIFT), and brightness (AE SHIFT) of the picture.
• Select GAINSHIFT to preset the gain-shift of the picture (0 dB/–3 dB).
• Select RESET to reset the preset setting in the CUSTOM menu.

Advanced Operations

SELFTIMER <10SEC/2SEC>
• Normally select 10SEC.
• Select 2SEC to set the time for self-timer recording to 2 sec.

Changing the Mode Settings
Items in VTR Mode only
A MIX BAL
• Select this item and change the level of the indicator by pressing > or . to adjust the volume balance
between audio mode ST1 and ST2.
SEARCH
• Normally select C MEMORY to activate cassette memory search function.
• Select OFF otherwise. In this case, the recorded picture is searched without cassette memory
function.
When DIGITAL MODE is set to OVERLAP
You cannot set D ZOOM to ON. Once you set DIGITAL MODE to OVERLAP, D ZOOM settings are changed
to OFF automatically.
About FRAME REC and INT REC setting
Both settings are automatically set to off when:
• Power switch is set to OFF or VTR.
• Power source is disconnected.
• PHOTO button is pressed.
Other settings retains as long as lithium battery is installed even if power source is disconnected.

Fader and Overlap
You can fade in or out to give your recording a professional appearance.
When fading in, the picture gradually fades in from black while the sound increases. When fading out,
the picture gradually fades to black while the sound decreases.
With the overlap function, the picture gradually fades in over a still picture of the last scene recorded.

Using the Fader and Overlap Function
When Fading in [a]
(1) While the camcorder is in Standby mode, press FADER/OVERLAP. The fade indicator starts
flashing.
(2) Press START/STOP to start recording. The fade indicator stops flashing, fading in and recording
starts.

When Fading out [b]
(1) During recording, press FADER/OVERLAP. The fade indicator starts flashing.
(2) Press START/STOP to stop recording. The fade indicator stops flashing, fading out starts, and then
recording stops.

Fade-in [a]

Fade-out

STBY

REC

STBY

FADER

REC

[b]

2
START/
STOP

OVERLAP
LOCK
STANDBY
PHOTO STANDBY

Advanced Operations

Fader and Overlap
When using Overlap
(1) Slide OPEN and open the battery cover.
(2) Set DIGITAL MODE on the rear of battery cover to OVERLAP.
(3) Press FADER/OVERLAP repeatedly until “OVERLAP” appears in the viewfinder.
The stored last scene overlaps the scene being shot.
(4) Press START/STOP to start recording.
The scene being shot gradually fades in over the still picture of the last recorded scene.

STBY

DIGITAL MODE

REC

OVERLAP

ZOOM
OVERLAP

FADER

START/
STOP

OVERLAP
LOCK
STANDBY
PHOTO STANDBY

1
To Cancel the Fade-in/Fade-out Function
Before pressing START/STOP, press FADER/OVERLAP until the fade indicator disappears.
To use the fading function repeatedly
Start from step 1 each time.
Notes on the fading and overlap function
• You cannot fade in, fade out, or use the overlap function while you record with interval recording, cut
recording or photo recording.
• The last scene for overlap is stored only when you record and press START/STOP again (recording
standby/pause mode) before using overlap. In other cases, this camcorder starts Rec Review automatically
to store the picture on the tape before it overlaps the scene being shot.

Re-recording a Picture in the Middle of a
Recorded Tape
You can re-record a scene in the middle of a recorded tape by setting the starting [a] and ending [b]
points.
The previously recorded portion will be erased.

START/
STOP
LOCK

[b]

[a]

STANDBY
PHOTO STANDBY

2
3

EDITSEARCH

ZERO SET
MEMORY

EDITSEARCH

START/
STOP
LOCK
STANDBY

PHOTO STANDBY

To change the end point
Press ZERO SET MEMORY so that “ZERO SET MEMORY” disappears.
Repeat steps 2 to 4.

Advanced Operations

(1) Press START/STOP while recording.
The camcorder enters Standby mode.
(2) Hold down the +(forward) or –(reverse) side of EDITSEARCH until the camcorder goes to the
point where you want to end the insertion. [b]
The camcorder enters Standby mode again.
(3) Press ZERO SET MEMORY.
The counter is reset to “0:00:00”.
“ZERO SET MEMORY” flashes, and the ending point is stored in memory.
(4) Hold down the – side of EDITSEARCH until the camcorder goes back to the point where you want
to start the insertion. [a]
The camcorder enters Standby mode again.
(5) Press START/STOP to start re-recording.
The insert recording stops automatically at the counter zero point, and the camcorder enters Standby
mode again. Zero set memory resumes automatically.

Re-recording a Picture in the Middle of a Recorded Tape
Notes on editsearch
• The picture may be distorted at the end of the inserted portion when it is played back.
• Zero set memory may not function when there is a blank portion between pictures on a tape.
• You can re-record without using the zero set memory. Skip steps 2 and 3. Press START/STOP to stop
recording.
To use the insert recording repeatedly
Start from step 1 each time.

Photo Recording
You can record a still picture like a photograph for about seven seconds. This mode is useful when
you want to enjoy a picture such as a photograph or when you print a picture using a video printer.
Shutter speed is automatically adjusted up to 1/1000 depending on the exposure.
(1) Set the standby switch to PHOTO STANDBY.
(2) Keep pressing PHOTO lightly until a still picture appears in the viewfinder.
To change the still picture, release PHOTO, select still picture again, and keep pressing PHOTO lightly
again.
If you press the PHOTO button on the Remote Commander when a still picture appears in the
viewfinder, the camcorder will record that still picture. However, you cannot select other still pictures
by using this button.
(3) Press PHOTO deeper.
The still picture in the viewfinder is recorded for about seven seconds. The sound during those seven
seconds is also recorded. If you change the POWER switch or the standby selector to other positions
while recording, this operation is performed after recording.

START/
STOP
LOCK
STANDBY

PHOTO STANDBY

2,
3

PHOTO

Note on using self-timer recording
When you use self-timer recording with photo recording, you cannot select the picture. In this case, once you
press PHOTO, self-timer recording starts, and the still picture at the point the self-timer starts is recorded.
When using the video printer
• The supplied Remote Commander is useful when printing a still picture with the CVP-M1 Video printer
(not supplied). To print the still picture, first connect the LANC control jack and the video output jack on
the camcorder to the LANC jack and the video input jack on the video printer respectively. Then, press
PRINT on the Remote Commander. The CVP-M1 automatically captures and prints the picture. Refer to
the instruction manual of the video printer as well.
• The recorded date is automatically printed as well. The present date, however, may not be printed if you
try to print when the POWER switch is turned to CAMERA and the camcorder is in Standby mode.
• You can also print pictures other than still pictures after selecting the desired one with the playback pause
mode.

Advanced Operations

Interval Recording
You can make a time-lapse recording by setting the camcorder to automatically record and standby
sequentially. You can achieve an excellent recording for flowering, emergence, etc., with this function.
(1) Slide OPEN and open the battery cover while the camcorder is in Standby mode. Press MENU to
display the menu in the viewfinder.
(2) Press > or . to select INT REC, then press EXECUTE.
(3) Press > or . to select ON, then press EXECUTE.
(4) Press > or . to select INTERVAL, then press EXECUTE.
(5) Press > or . to select the desired waiting time, then press EXECUTE.
The time: 30SEC ↔ 1MIN ↔ 5MIN ↔ 10MIN.
(6) Press > or . to select REC TIME, then press EXECUTE.
(7) Press > or . to select the desired recording time, then press EXECUTE.
The time: 0.2SEC ↔ 0.5SEC ↔ 1SEC ↔ 2SEC.
(8) Press MENU to erase the menu display.
(9) Press START/STOP to start interval recording.

START/
STOP
LOCK
STANDBY
PHOTO STANDBY

2
7

EXECUTE

8
MENU

To stop interval recording before the tape ends
Press START/STOP.

To cancel the interval recording
• Set the INT REC mode to OFF in the menu system.
• Turn STANDBY down to LOCK.
• Turn the power switch to OFF or VTR.
Note on interval recording
You cannot do interval recording with photo recording.

Cut Recording
You can make a recording with a stop-motion animated effect using cut recording. To create this
effect, alternately move the subject a little and make a cut recording. Secure the camcorder and use the
Remote Commander for effective cut recording.
(1) Slide OPEN and open the battery cover while the camcorder is in Standby mode. Press MENU to
display the menu in the viewfinder.
(2) Press V or v to select FRAME REC, then press EXECUTE.
(3) Press V or v to select ON, then press EXECUTE.
(4) Press MENU to erase the menu display.
(5) Press START/STOP on the camcorder or the Remote Commander to start cut recording.
The camcorder records about 6 frames, then enters in recording standby mode.
(6) Move the subject, and repeat step 5.

START/
STOP
LOCK
STANDBY
PHOTO STANDBY

2,
3
EXECUTE

4
MENU

To cancel the cut recording
• Set the FRAME REC mode to OFF in the menu system.
• Turn STANDBY down to LOCK.
• Turn the power switch to OFF or VTR.
Advanced Operations

Notes on cut recording
• The portion immediately after cut recording is completed may be longer than four frames.
• You cannot do cut recording with photo recording.
• Remaining tape indicator may not be accurate if you do cut recording repeatedly.

Self-timer Recording
You can make a recording with the self-timer when the SELFTIMER mode is set to ON (2SEC or
10SEC) in the menu system. This mode is useful when you want to make a recording at yourself.
in the viewfinder while the camcorder is in Standby mode.
(1) Press SELF TIMER to display
(2) Press START/STOP.
Self-timer starts counting down with a beep sound, then recording starts automatically at the time you
set.

SELF
TIMER

START/
STOP
LOCK

STANDBY
PHOTO STANDBY

To stop self-timer recording
Press START/STOP.
Use the Remote Commander for convenience.

To cancel self-timer recording
Press SELF TIMER so that

disappears from the viewfinder while the camcorder is in Standby mode.

Self-timer recording mode is canceled when
• Self-timer recording is finished.
• Power switch is set to OFF or VTR.
• Standby selector is set to LOCK.
• Interval recording starts.
• Cut recording starts.
To change the time for self-timer recording
Set it at the SELFTIMER mode in the menu system (page 20).
To use photo recording with self-timer recording
Set the standby selector to PHOTO STANDBY, press SELF TIMER, and press PHOTO.
Self-timer starts counting down with a beep sound, then photo recording starts automatically at the time you
set (page 27).
Note that self-timer recording will not function when you press SELF TIMER if you keep pressing PHOTO
lightly. In this case, release PHOTO once and start from step 1 again.

Selecting Automatic Mode and Manual
Adjustment
You can select three types of adjustment mode for exposure, shutter speed, white balance, focus, and
recording level.
• Automatic Mode: offers you worry-free operation under most shooting conditions. Normally use
this mode. Set HOLD/AUTO LOCK selector to AUTO LOCK.
• PROGRAM AE Mode: offers you three PROGRAM AE modes to fit the shooting situation. Set
HOLD/AUTO LOCK selector to center (auto lock release) position.
• Manual Adjustment: offers you creative recording under various conditions. Set HOLD/AUTO
LOCK selector to center (auto lock release) position.
Mode

Exposure (iris)

Shutter Speed

Automatic

A/M

PROGRAM AE
Priority to Iris
Priority to shutter
Twilight
(No indication)

M
A
A
A

A
M
A
A

S
S
S
S

A/M
A/M
A/M
A/M

M
M
M
M

A/M

Manual

White Balance

Focus*

Recording Level

A: Automatic adjustment
M:Manual adjustment
S: Select
*: You can select automatic or manual to adjust focusing at any mode.

Using Automatic Mode
Set HOLD/AUTO LOCK selector to AUTO LOCK. In automatic mode, the camcorder adjusts the
exposure, shutter speed**, white balance, and recording level automatically. The focus can be adjusted
automatically by setting the FOCUS switch to AUTO.
** When the A SHUTTER mode in the menu system (page 20) is set to
ON: 1/60 to 1/250 automatic adjustment
OFF: 1/60 fixed

AUTO LO

PROGRAM AE Mode
You can select from three PROGRAM AE modes.
In this mode, you can adjust exposure (p. 38), shutter speed (p. 40),white balance (p. 43), and recording
level (p. 46) manually.

Advanced Operations

HOLD

Focusing Manually
To activate auto focusing, very bright condition and proper contrast are required. Use manual focus
according to the conditions. You can focus manually even if the HOLD/AUTO LOCK selector is set to
AUTO LOCK (Automatic Mode).

When to Use Manual Focus
In the following cases you should obtain better results by adjusting the focus manually.
[a]

•
•
•
•
•
•

[b]

[c]

[d]

Insufficient light [a]
Subjects with little contrast — walls, sky, etc. [b]
Too much brightness behind the subject [c]
Horizontal stripes [d]
Bright subject or subject reflecting light
Shooting a stationary subject when using a tripod

Focusing Manually
When focusing manually, first focus in telephoto before recording, and then reset the shot length.
(1) Set FOCUS to MANUAL while the camcorder is recording or in Standby mode.
f appears in the viewfinder.
(2) Keep pressing the “T” (telephoto) side of the zoom button until the zooming stops.
(3) Turn the focus ring to achieve a sharp focus.
While turning the focus ring,
or
appears in the viewfinder.
appears in the viewfinder in focus.
(4) Set the desired shot length using the zoom button.

2
1

FOUCUS
AUTO
MANUAL
INFINITY

PUSH AUTO

3
32

When
or
appears
appears, or turn it counterclockwise when
Turn focus ring clockwise when
viewfinder. If you cannot get in focus, turn in the reverse direction.
When
When

appears in the

appears, focus is at infinity.
appears, subject is too close.

Notes on
indicator
• It does not appear when you select a slow shutter speed (while DIGITAL MODE switch is set to ZOOM).
• It disappears if you do not turn the focus ring for 1.5 seconds.

To Reactivate Auto Focusing
Set FOCUS to AUTO to disappear f in the viewfinder.
Shooting in relatively dark places
Shoot in wide angle after focusing in telephoto.
Shooting a scene with lots of movement in bright light
Set the zoom button fully to the wide-angle position.
Close-ups (Macro)
Set the zoom button fully to the wide-angle position.

Focusing to Infinity
Focus to infinity when the camcorder focuses on a nearby subject while you want on focus to a distant
subject.
Slide FOCUS in the direction of the arrow (INFINITY) to focus to infinity.
When you release FOCUS, manual focus resumes.

FOUCUS
AUTO
MANUAL
INFINITY
PUSH AUTO

Shooting with Auto Focusing Momentarily

PUSH AUTO

Advanced Operations

Press PUSH AUTO.
The auto focus functions while you are pressing PUSH AUTO.
Use this switch to focus on one subject and then another with smooth focusing.
When you release PUSH AUTO, manual focusing resumes.

Using the PROGRAM AE Function
Select one of the three PROGRAM AE modes, then go to each step.
(1) Set HOLD/AUTO LOCK selector to the center (auto lock release) position.
(2) Press PROGRAM AE repeatedly to select the desired mode.
The mode changes: AEA (Priority to iris) → AES (Priority to shutter speed) → Å (Twilight) → No
indication (Manual), cyclically in the viewfinder.

2
PROGRAM

AES

HOLD

AEA

AUTO LO

Giving Priority to Iris AEA, A
You can select the exposure (iris) to determine the desired depth of field. Gain and the shutter speed
are automatically set in combination with the exposure (iris) value to maintain appropriate exposure.
Turn the CONTROL dial to select the desired exposure (iris) value. As you turn the dial, the F value
changes between F1.6 and F11.
For a smaller exposure (iris), select a higher value. Gain and the shutter speed change in accordance
with the selected exposure (iris) value.

AEA
F1.6

CONTROL

AEA
F2

To return to automatic mode
Set HOLD/AUTO LOCK selector to AUTO LOCK, or press PROGRAM AE repeatedly until AEA,
AES, or Å disappears from the display.

When you focus in telephoto
You cannot choose F1.6.
About the depth of field
The depth of field is the in-focus range, measured from the distance behind a subject to the distance in front.
The depth of field can vary with the exposure (iris) value and the focal length. Lowering the F value (large
iris) reduces the depth of field. Raising the F value (smaller iris) provides a larger depth of field. Zooming in
telephoto position offers a smaller depth of field while the depth of field in wide-angle position is greater.

The depth of field

Shallow (lowering the F value)

Deep (raising the F value)

Exposure (iris)

Smaller iris

Larger iris

Zoom

Telephoto (T)

Wide (W)

Giving Priority to Shutter Speed AES, S
You can select the shutter speed between 1/ 60 and 1/10000. When you select a faster shutter speed,
movement appears clearer with less shaking when the tape is played back in still or slow mode. This
mode is most effective in the following cases:
• A golf swing or a tennis match in fine weather with the ball movement captured clearly
• Playing back certain scenes with high-speed movements in clear sharp pictures
Turn the CONTROL dial to select the desired shutter speed. As you turn the dial, shutter speed
changes between 1/60 and 1/10000.
For a faster shutter speed, select a larger value indicator in the viewfinder. The exposure (iris) value
changes in accordance with the selected shutter speed.

AES
90

CONTROL

AES
10 0

Advanced Operations

Using the PROGRAM AE Function
To select the best shutter speed
Example

Shutter speed

• A golf swing or tennis match in fine weather (to view the hit ball clearly in
still picture mode, set to 1/1000 to 1/10000)

1/500 to 1/1000

• A landscape shot from a moving car

1/125 to 1/500

• A moving roller coaster on an overcast day
• An athletic scene, marathon, etc.
• Indoor sports
• Replacement for the ND2 filter (to halve the exposure)

1/100

• In sunny weather (to avoid an out-of-focus picture due to a small iris)

1/90 to 1/100

To return to automatic mode
Set HOLD/AUTO LOCK selector to AUTO LOCK, or press PROGRAM AE repeatedly until AEA,
AES, or Å disappears from the display.
Shutter speed indicator in the viewfinder
For example, the 1/100 shutter speed is displayed as “100” in the viewfinder.
Note on higher shutter speed
When shooting a very bright subject, a vertical band (smear) may appear on the screen if the shutter speed is
set too high.

Using with Twilight Mode Å
You can record a subject such as night views, neon signs or fireworks, reducing color drop out.
Press PROGRAM AE repeatedly so that Å appears in the display while the camcorder is in Standby
mode or recording.

PROGRAM

To return to automatic mode
Set HOLD/AUTO LOCK selector to AUTO LOCK, or press PROGRAM AE repeatedly until AEA,
AES, or Å disappears from the display.
About twilight mode setting
The shutter speed is locked at 1/60, and to prevent the increase of noise, the gain is adjusted.

To lock the PROGRAM AE mode and manual settings
Set HOLD/AUTO LOCK selector to HOLD.
The EXPOSURE, SHUTTER SPEED, WHT BAL, REC LEVEL, PROGRAM AE buttons, and CONTROL,
EXPOSURE dials do not function.

HOLD

AUTO LO

About the previous settings
The lithium battery must be installed to temporarily save manual settings if you detach the battery. The
settings are saved for five minutes.

Advanced Operations

Adjusting the Exposure
Adjust the exposure manually under the following cases.

[b]

[a]

[a] Turn the exposure dial to + when:
• The background is too bright (backlighting)
• Insufficient light: most of the picture is dark
[b] Turn the exposure dial to – when:
• The subject is bright and the background is dark
• You want to record the darkness faithfully

Adjusting the Exposure
(1) Set HOLD/AUTO LOCK selector to the center (auto lock release) position while the camcorder is
in Standby mode.
(2) Press EXPOSURE.
The exposure is locked at the value which was selected automatically at that time.
(3) Turn EXPOSURE dial to select the desired exposure value. As you turn the dial, the exposure (iris)
value changes between OPEN and CLOSE and the exposure value changes between 0 (–3) dB and
+18dB while the iris value is set to OPEN.
To increase the exposure to brighten the picture, select a higher level.

HOLD

EXPOSURE

AUTO LO

To lock the manual settings
Set HOLD/AUTO LOCK to HOLD after making the settings. The EXPOSURE, SHUTTER SPEED,
WHT BAL, PROGRAM AE and REC LEVEL buttons, the CONTROL and EXPOSURE dials do not
function.

HOLD

AUTO LO

To return to automatic mode
Set HOLD/AUTO LOCK selector to AUTO LOCK.

To change the setting
Repeat steps 1 to 4.

To cancel the setting
Press the EXPOSURE button again after step 2. The EXPOSURE indicator disappears from the
viewfinder. The automatic exposure mode is resumed.
Notes on exposure level
• When you select an exposure level that is too high, the picture may be distorted.
• To select –3dB, select CUSTOM and set GAINSHIFT to –3dB in the menu system.
Note on iris/gain value indicator
The information of the EXPOSURE dial does not appear even if you press EXPOSURE while the camcorder is
in PROGRAM AE mode (AEA, AES, or Å).
Notes on while adjusting the exposure
• CONTROL dial and SHUTTER SPEED button do not function.
• The setting is canceled if you press the PROGRAM AE button.

Advanced Operations

Adjusting the Shutter Speed
(1) Set HOLD/AUTO LOCK selector to the center (auto lock release) position while the camcorder is
in Standby mode.
(2) Press PROGRAM AE repeatedly until AEA, AES, or Å disappears from the display.
(3) Press SHUTTER SPEED.
The speed is locked at the value which was selected automatically at that time.
As you press SHUTTER SPEED the speed changes 1/100 and 1/1000.
(4) Turn CONTROL dial to select the desired speed. As you turn the dial, speed changes:
1/4 ↔ 1/8 ↔ 1/15 ↔ 1/30 ↔ ... ↔ 1/4000 ↔ 1/6000 ↔ 1/10000
To increase the shutter speed, select a smaller setting (large value indicator in the viewfinder).

HOLD

SHUTTER
SPEED

AUTO LO

PROGRAM

4
CONTROL

To return to automatic mode
Set HOLD/AUTO LOCK selector to AUTO LOCK.

To change the setting
Repeat steps 1 to 4 above.

To cancel the setting
Press the SHUTTER SPEED button again after step 2. The SHUTTER SPEED indicator disappears from
the viewfinder.
Note on the shutter speed
You can set the speed to 1/4, 1/8, 1/15, and 1/30 only when you set the DIGITAL MODE switch to ZOOM.
For quick access to the desired shutter speed
First press SHUTTER SPEED twice to set to 1/100, then press SHUTTER SPEED again to set to 1/1000. Turn
the CONTROL dial for quick access to speeds of more than 1/1000.

Using the ND Filter
Using the ND filter (correspond to one-tenth the quantity of light), you can record a picture clearly,
preventing the picture from going out of focus under bright conditions.
When ND ON flashes in the viewfinder [a]
Set ND FILTER to ON.
When ND OFF flashes in the viewfinder [b]
Set ND FILTER to OFF.

[a]

ND
FILTER

[b]

ND
FILTER

OFF

Advanced Operations

Using with the Zebra Pattern
You can set the camcorder to display a zebra pattern (diagonal stripes) in the portion of the picture in
the viewfinder with a subject whose brightness exceeds a certain level. The portion of the picture
where zebra pattern appears is an area of high brightness and overexposure. You can check the picture
level of a subject by displaying the zebra pattern. Use the zebra pattern as a guide for adjusting the
exposure (iris) and shutter speed so that you can get the desired picture.
Before you start recording, set ZEBRA to ON in the menu system.
(1) Slide OPEN and open the battery cover while the camcorder is in Standby mode.
(2) Press MENU to display the menu in the viewfinder.
(3) Press > or . to select ZEBRA, then press EXECUTE.
(4) Press > or . to select ON, then press EXECUTE.
(5) Press MENU to erase the menu display.

Zebra
pattern

2
MENU

3,
4
EXECUTE

5
MENU

1
Note on shooting with the zebra pattern
Even though you see the zebra pattern in the viewfinder, the zebra pattern is not recorded.

Adjusting the White Balance
White balance adjustment makes white subjects look white and allows more natural color balance for
camera recording. Normally white balance is automatically adjusted. You can obtain better results by
adjusting the white balance manually when lighting conditions change quickly or when recording
outdoors: e.g., neon signs, fireworks.

Selecting the Appropriate Mode
Select the appropriate white balance mode under the following conditions.

[a]

[b]

[c]

e Indoor mode
• Lighting condition changes quickly. [a]
• Too bright place such as photography studios
• Under sodium lamps or mercury lamps
w Outdoor mode
• Under a color matching fluorescent lamp
• Recording a sunset/sunrise, just after sunset, just before sunrise [b], neon signs, or fireworks [c]

Setting the White Balance
(1) Set HOLD/AUTO LOCK selector to the center (auto lock release) position while the camcorder is
in Standby mode.
(2) Press WHT BAL repeatedly to select the appropriate white balance mode.
Each time you press the button, the indicator inside the viewfinder changes:
No indicator (auto) → ∑ → w (outdoor) → e (indoor)

WHT BAL

HOLD

AUTO LO

To return to automatic white balance mode

Advanced Operations

Set HOLD/AUTO LOCK selector to AUTO LOCK or press WHT BAL repeatedly until no indicator
appears in the viewfinder.

Adjusting the White Balance
Locking the white balance setting (One-push white balance mode)
When you set the white balance to one-push white balance mode, the setting is locked and maintained
even if lighting conditions change, and saved for one hour after power sources such as the battery are
detached if the lithium battery is inserted. You can achieve recording with natural colors without
being affected by ambient light.
(1) Set HOLD/AUTO LOCK selector to the center (auto lock release) position.
(2) Press WHT BAL twice to display ∑ in the viewfinder.
(3) Shoot a white object such as paper fully in the viewfinder.
(4) Press ∑.
The ∑ indicator flashes rapidly. When the white balance has been adjusted and stored in the memory,
the indicator stops flashing.

2
HOLD

AUTO LO

WHT BAL

Notes on the ∑ indicator in the viewfinder
• The state of the indicator shows as follows:
Slow flashing: White balance is not adjusted.
Fast flashing: White balance is being adjusted after pressing the ∑ button.
Lights up: White balance has been adjusted.
• When the ∑ indicator remains flashing even if you press the ∑ button, shoot in automatic white balance
mode. Press WHT BAL until no indicator appears in the viewfinder or set HOLD/AUTO LOCK selector to
AUTO LOCK.
Notes on white balance
• When you shoot with studio lighting or video lighting, use the e (indoor) mode.
• When you shoot with fluorescent lighting, use automatic white balance mode. If you use the e mode,
white balance may not be adjusted appropriately.
Shooting when the lighting condition changes
• When the lighting condition has changed, readjust the white balance with the ∑ button while the
camcorder is in Standby mode. This button does not function during recording.
• When you adjust the exposure (iris) and shutter speed manually, and move from indoors to outdoors or
vice-versa, set HOLD/AUTO LOCK selector to AUTO LOCK, then set HOLD/AUTO LOCK selector to the
center position again.
• When you move from indoors to outdoors or vice-versa, or detach the battery for replacement while
shooting in automatic white balance mode, point the camcorder at a white subject about 10 seconds before
you start recording.

Advanced Operations

Adjusting the Recording Sound
You can adjust the recording sound level. Use headphones to monitor the sound when you adjust.

To adjust the recording sound automatically
Set HOLD/AUTO LOCK selector to AUTO LOCK.

HOLD

AUTO LO

To adjust the recording sound manually
(1) Set HOLD/AUTO LOCK selector to the center position.
(2) Press REC LEVEL to display ” in the viewfinder.
(3) Turn CONTROL dial to adjust the sound level, so that the PEAK indicator does not light up.
It is recommended to use headphones (not supplied) to monitor the sound when you adjust.
As you turn the dial, the sound level changes between 0 (no sound) and 10 in 0.5 steps.

2
HOLD

3
CK

AUTO LO

To lock the setting
Set HOLD/AUTO LOCK selector to HOLD.
To return to automatic recording sound
Press REC LEVEL until ” disappears from the viewfinder.

REC
LEVEL

CONTROL

Notes on the adjustment
• The sound level setting is retained as long as the power is on and for about five minutes after the power
turns off. After that the level is set to 7.5, the factory setting.
• If you change the shutter speed or you press PROGRAM AE button, ” disappears from the viewfinder and
you cannot adjust the sound level. To adjust, press REC LEVEL again to display ” in the viewfinder.
• Though the DV recording system records two stereo sounds to stereo 1 and 2, this camcorder records the
sound to stereo 1 only. You can adjust the play back sound balance between stereo 1 and 2 (p. 22).
• Sound level also appears at the lower right in the display window.
For example, when 7.0 appears in the viewfinder, 7 appears in the display window, and when 7.5 appears
in the viewfinder, 7. appears in the display window (the decimal point represents 0.5).

Advanced Operations

Releasing the Steady Shot Function
When you shoot, the Ó indicator appears in the viewfinder. This indicates that the Steady Shot
function is working and the camcorder compensates for camera-shake.
(1) Slide OPEN and open the battery cover.
(2) Set STEADY SHOT to OFF so that the Ó indicator disappears.

STEADY SHOT
ON
OFF

To activate the Steady Shot function again
Set STEADY SHOT to ON to display the Ó indicator.
Notes on the Steady Shot function
• The Steady Shot function will not correct excessive camera-shake.
• The Steady Shot function becomes less effective when using a teleconversion lens (not supplied) or wide
teleconversion lens (not supplied).
• The Steady Shot function detects and compensates for camera-shake. You can turn off the Steady Shot
function if you use the camcorder mounted on a tripod because you do not have to worry about camerashake.

Presetting the Adjustment for Picture Quality
You can preset the camcorder to record the picture with the desired picture quality.
When presetting, adjust the picture by shooting a subject and checking the picture displayed on a TV
using the menu system.
(1) Slide OPEN and open the battery cover while the camcorder is in Standby mode.
(2) Press MENU to display the menu in the viewfinder.
(3) Press > or . to select CUSTOM, then press EXECUTE.
The custom mode menu appears.
(4) Press . to select SET, then press EXECUTE.
(5) Press . to select ON, then press EXECUTE.
(6) Press > or . to select the desired item, then press EXECUTE.
(7) Press > or . to adjust the selected mode, then press EXECUTE.
Item
COLOR LV

Function to adjust the
color intensity

Adjustment value
Decreases color intensity ↔ Increases color intensity

SHARPNESS

sharpness

Softer ↔ Sharper

WB SHIFT

white balance

Bluish ↔ Reddish

AE SHIFT

brightness

Darker ↔ Brighter

GAINSHIFT

gain-shift

0dB/–3dB

(8) Press MENU to erase the menu display.

MENU
EXECUTE

Note on adjustment of each item
Make sure to shoot the appropriate subject for the item you want to preset.

To record with the preset setting
Press MENU while the camcorder is in Standby mode.
Press > or . to select CUSTOM, then press EXECUTE.
Press . to select SET, then press EXECUTE.
Press . to select ON, then press EXECUTE.
Press MENU to display [CP] in the viewfinder.

Advanced Operations

1
2
3
4
5

Presetting the Adjustment for Picture Quality
To record without the preset setting
1
2
3
4

Press MENU while the camcorder is in Standby mode.
Press > or . to select CUSTOM, then press EXECUTE.
Press . to select SET, then press EXECUTE.
Press > to select OFF, then press EXECUTE.
[CP] goes off in the viewfinder.

To return to the standard setting
1
2
3
4

Press MENU while the camcorder is in Standby mode.
Press > or . to select CUSTOM, then press EXECUTE.
Press . to select SET, then press EXECUTE.
Press . to select RESET, then press EXECUTE.
[CP] goes off in the viewfinder.

Checking the Custom Preset Setting
You can display and check the custom preset setting in the viewfinder while recording.
Press CP CHECK located on the top of the camcorder while the camcorder is in Standby mode or
recording.
Custom preset setting appears in the viewfinder.
About the gain-shift setting
Use the gain-shift function when you shoot under bright conditions. It adjusts the gain as close as –3 dB
automatically. The gain-shift function does not work when you shoot under dark conditions.

Searching the Recorded Picture
When you use a cassette memory-mounted mini DV cassette which can store the recorded date or time,
etc., you can search the recorded picture with the date or time using the Remote Commander (Cassette
memory search). You can also search the photo-recorded pictures only, or the recorded picture in the
backward and forward direction from the present position without cassette memory.

Searching the recorded picture with the date or time – Cassette
memory search
(1) Turn the POWER switch to VTR.
(2) Slide OPEN and open the battery cover.
(3) Press MENU to display the menu in the viewfinder.
(4) Set SEARCH to C MEMORY in the menu system.
(5) Press MENU to erase the menu display.
(6) Press SEARCH SELECT on the Remote Commander to select date search (search with the date) or
photo search (search the photo-recorded pictures only).
(7) Press ± for upward or ≠ for downward on the Remote Commander to select the desired
picture.
Cassette memory search starts.

F
OF

3~5

SEARCH
SELECT

POWER
A
ER
M

Note on the cassette memory search
You cannot use cassette memory search function even if you set the SEARCH to C MEMORY in the menu
system, when you use a mini DV cassette lacking the cassette memory.

Advanced Operations

About the cassette memory search
You can search up to 6 days for date search and 43 pictures for photo search when you use the 4K-bit cassette
memory.

Searching the Recorded Picture
Searching the recorded picture without using cassette memory
(1) Turn the POWER switch to VTR.
(2) Slide OPEN and open the battery cover.
(3) Press MENU to display the menu in the viewfinder.
(4) Set the SEARCH to OFF in the menu system.
(5) Press MENU to erase the menu display.
(6) Press SEARCH SELECT on the Remote Commander to select date search (search with the date) or
photo search (search the photo-recorded pictures only).
(7) Press ± for forward or ≠ for backward on the Remote Commander to select the desired
picture.
Each time you press ± or ≠, the camcorder searches for the next scene.

POWER
A
ER
M

F
OF

3~5

SEARCH
SELECT

To stop searching
Press πSTOP.
When you use a recorded tape which has blank portions between pictures
The camcorder may not search for the recorded picture or data may not be stored.
Notes on searching
• Be sure to install the lithium battery when you use the cassette with cassette memory.
• The camcorder may not search if the beginning of the search portion is too close to the tape head position.
• When you use date search, the camcorder plays back the search picture, and when you use photo search,
the camcorder enters playback pause at the point.

Checking the Information for the Recorded
Picture
You can display the recorded date and time or the various settings in the viewfinder while playing
back the tape.
Press DATA CODE on the Remote Commander while playing back. Each time you press the button,
the indicator changes: recorded date and time → various settings → No indication, cyclically in the
viewfinder.
Press DATA CODE again to erase the display.

DATA CODE

“– –:– –:– –” appears when

• the camcorder cannot read the data code because of a damaged tape or noise.
• the tape was recorded without setting the date and time.

Advanced Operations

Editing onto Another Tape
You can create your own video program by editing with any other DV, mini DV, h 8 mm, H Hi8,
j VHS, k S-VHS,  VHSC, K S-VHSC, l Betamax, or ¬ ED Beta VCR that has
video/audio inputs.
You can edit with little deterioration of picture and sound quality when using the DV connecting cable.

Before Editing
Connect the camcorder to the VCR using the supplied A/V connecting cable (page 15) or the DV
connecting cable (not supplied).
Use this camcorder as a player.

Using the A/V connecting cable
Set the input selector on the VCR to LINE.

Using the DV connecting cable
Simply connect the DV connecting cable to DV IN/OUT and DV products to DV IN.

DV IN/OUT

DV IN/OUT
VMC-2DV

ç
ç : Signal flow

About DV connecting cable
You can record picture, sound and system data at the same time on the DV products by using the DV
connecting cable only.

Starting Editing
(1) Insert a blank tape (or a tape you want to record over) into the recording VCR. Then insert your
recorded tape into the camcorder.
(2) Play back the recorded tape on the camcorder until you locate the point where you want to start
editing. Then set the camcorder to playback pause mode.
(3) Set the recording VCR to recording pause mode.
(4) Press P on the camcorder and VCR simultaneously to start editing.

To Edit More Scenes
Repeat steps 2 to 4.

To Stop Editing
Press STOP π on the camcorder and VCR.
Note on editing when using the A/V connecting cable
Press DISPLAY on the Remote Commander while editing onto another tape to turn off the display indicators.
Otherwise, the indicators will be recorded on the tape.
If your VCR is a monaural type
Connect only the white plug for audio on both the camcorder and the VCR. With this connection, the sound
is monaural.
For fine synchro-editing function
You can edit precisely by connecting a control cable to the LANC jack of this camcorder and other video
equipment having fine synchro-editing function, using this camcorder as a player.
Notes on editing when using the DV connecting cable
• You can connect one VCR only.
• When using the DCR-VX1000 as a recorder, press the two recording buttons at the same time to set the
recording VCR to recording pause mode.
• Connect the LANC jacks when controlling this camcorder from an other VCR for editing.
• If you record playback pause picture via the DV jack, the recorded picture becomes rough.
• You can use this camcorder as a recorder. In this case, you do not need to change the connection since the
direction of signal flow changes automatically, but check that "DV IN" appears on the TV and/or
viewfinder.
When you use this camcorder as a recorder
Cassette memory data is not recorded.

Advanced Operations

Replacing Recording on a Tape
You can insert a new picture, sound, recording date/time, camera information, etc., from a VCR onto
your originally recorded tape by specifying and ending points.
Connection is the same as in "Using the DV connecting cable" on page 54. Refer to the instruction
manual of the connected equipment also.
(1) Turn the POWER switch to VTR.
(2) Search for the start point to be inserted on the VCR, then set the VCR to playback pause mode.
(3) Search for the point where you want to end insert editing, then set the camcorder to playback pause
mode.
It is convenient to use the EDITSEARCH button (p. 14).
(4) Press ZERO SET MEMORY.
The counter is reset to zero (0:00:00:00).
(5) Search for the point where you want to start editing, then set the camcorder to recording pause
mode.
(6) Press P on the camcorder and the VCR simultaneously to start editing.
The editing starts and new scene is inserted on the recorded tape. The editing stops automatically near
the counter zero point (0:00:00:00).

POWER
RA
ME

ZERO SET
MEMORY

F
OF

3,
5,
6

PAUSE

To change the end point
Press ZERO SET MEMORY after step 5 to go off the ZERO SET MEMORY indicator, then repeat from
step 2.
To stop editing
Press πSTOP to go off the ZERO SET MEMORY indicator.
About editing
You can start editing without setting the end point. Instead of steps 3 and 4, press πSTOP at the desired end
point.
Notes on editing
• You cannot edit with the equipment which is not connected to DV connector.
• The previous recorded scene is erased when editing starts.
• The picture may be distorted at the end of the inserted portion when it is played back.

Additional Information

Using Your Camcorder Abroad
Each country has its own electricity and TV color systems. Before using your camcorder abroad, check
the following points:

Power Sources
You can use your camcorder in any country with the supplied AC power adaptor within 100 V to 240
V AC, 50/60 Hz.
Use a commercially available AC plug adaptor, if necessary, depending on the design of the wall
outlet.
Wall outlet
AC-V515
AC plug adaptor

Difference in Color Systems
This camcorder is an NTSC system-based camcorder. If you want to view the playback picture on a TV,
it must be an NTSC system based TV. Check the following alphabetical list.
NTSC system countries
Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica, Japan, Korea,
Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc.
PAL system countries
Australia, Austria, Belgium, China, Denmark, Finland, Germany, Great Britain, Holland, Hong Kong,
Italy, Kuwait, Malaysia, New Zealand, Norway, Portugal, Singapore, Spain, Sweden, Switzerland,
Thailand, etc.
PAL M system country
Brazil

SECAM system countries
Bulgaria, Czech Republic, France, Guyana, Hungary, Iran, Iraq, Monaco, Poland, Russia, Slovak
Republic, Ukraine, etc.

Additional Information

PAL N system countries
Argentina, Paraguay, Uruguay

Replacing the Lithium Battery in the
Camcorder
Your camcorder is supplied with the lithium battery installed. When the battery becomes weak or
dead, I indicator flashes in the viewfinder for about 5 seconds when you set the POWER switch to
CAMERA. In this case, replace the battery with the Sony CR2025 or Duracell DL-2025
lithium battery. Use of another battery may present a risk of fire or explosion.
The lithium battery installed at the factory may not last 1 year.

Notes on Lithium Battery

02
R2 5

(+)

• Note that the lithium battery has a positive (+) and a negative (–) terminals as illustrated. Be sure
to install the lithium battery so that terminals on the battery match the terminals on
the camcorder.
• To avoid a poor connection, clean the battery with a dry cloth before using it.

R2025

(–)

WARNING
The battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.
Caution
Keep the lithium battery out of the reach of children. Should the battery be swallowed, consult a
doctor immediately.

Replacing the Lithium Battery
When replacing the lithium battery, keep the battery pack or other power source attached. Otherwise,
you will need to reset the date and time.
(1) Slide OPEN and open the battery cover.
(2) Push the battery down once and pull it out from the holder.
(3) Install the lithium battery with the positive (+) side facing out. Close the battery cover.

3
2

Additional Information

Resetting the Date and Time
You can reset the date or time in the menu system.
(1) Slide OPEN and open the battery cover.
(2) Press MENU to display the menu in the viewfinder.
(3) Select CLOCK SET, then press EXECUTE.
(4) Press V or v to adjust the year, and then press EXECUTE.
(5) Using V, v and EXECUTE as step 4, adjust the month, day, hour and minutes. Note that when you
hold down V or v the indications in the menu display advance faster.
(6) Press MENU to erase the menu display.

2
MENU

A SHUTTER
ON
D ZOOM
ZEBRA
COMMANDER
HEADPHONE
BEEP
EVF MODE

BEEP
EVF MODE
FRAME REC
INT REC
SELFTIMER
CUSTOM
CLOCK SET

[MENU]:END

1 9 9 5 JAN 1

CLOCK SET
1 2 0 0 AM

MENU
JAN 1 19 9 5
1 2 : 0 0 : 0 0 AM

EXECUTE

EXECUTE
1 9 9 6 JAN 1

CLOCK SET
1 2 0 0 AM

1996

JUL 1

CLOCK SET
1 2 0 0 AM

1996

EXECUTE

JUL 4

CLOCK SET
1 2 0 0 AM

1996

JUL 4

CLOCK SET
3 0 0 PM

EXECUTE

MENU
BEEP
EVF MODE
FRAME REC
INT REC
SELFTIMER
CUSTOM
CLOCK SET

1 9 9 6 JUL 4
JUL 4 19 9 6
3 : 1 6 : 0 0 PM

[MENU]:END

The year indicator changes as follows:
1995 n 1996 n - - - n 2025 n 1995
Note on the time indicator
The internal clock of the camcorder operates on a 12-hour cycle.
12:00:00 AM stands for midnight.
12:00:00 PM stands for noon.

EXECUTE

CLOCK SET
3

1 6 PM

EXECUTE

Video Cassettes
Usable Cassettes
You can use the mini DV cassette only. You cannot use any other h 8 mm, H Hi8, j VHS, k SVHS,  VHSC, K S-VHSC , l Betamax or ¬ ED Beta cassette.

Copyright Signal
When You Play Back
Using this camcorder, you cannot play back a tape that has recorded a copyright control signals for
copyright protection of software. “COPY INHIBIT” appears on the TV or in the viewfinder if you try
to play back such a tape. This camcorder does not record copyright control signals on the tape when it
records.

When You Record
You cannot use this camcorder and the DV connecting cable to copy a tape that has recorded the
copyright control signals for copyright protection of software. "COPY INHIBIT" appears on the TV or
in the viewfinder if the play back signal of such a tape is input to this camcorder.
Audio mode
The camcorder records sound in stereo 1 only in 12-bit mode (32 kHz), but can play back sound
recorded in either stereo 1 or 2. Moreover, it can also play back sound recorded in 16-bit mode (32
kHz, 44.1 kHz or 48 kHz).
We recommend to use an ME cassette
You can get the highest quality pictures with this camcorder using an ME cassette which is the highest
quality cassette.
You may not get as good quality with lesser quality cassettes.

Additional Information

Video Cassettes
Notes on the mini DV cassette
Gold-plated connector of the mini DV cassette
If the gold-plated connector of the mini DV cassette gets dirty or dust sticks to the connector, the
camcorder may malfunction when using the cassette memory functions, such as cassette memory
search.
Clean the connector with the swab once every ten times you eject a cassette. [a]

To prevent accidental erasure
Slide out the protect tab on the cassette so that the red portion is visible. [b]

When affixing a label on the mini DV cassette
Be sure to affix a label on only the location as illustrated below so as not to cause malfunction of the
camcorder. [c]

After using the mini DV cassette
Rewind the tape to the beginning, put the cassette in its case, and store it in an upright position.

[a]

[b]

To record
Slide out to prevent accidental erasure.

[c]

Tips for Using the Battery Pack
This section shows you how you can get the most out of your battery pack.

Preparing the Battery Pack
Always Carry Additional Batteries
Have sufficient battery pack power to do 2 to 3 times as much recording as you have planned.

Battery Life is Shorter in Cold Environment
Battery efficiency is decreased and the battery will be used up more quickly if you are recording in cold
environment.

To Save Battery Power
Turn the STANDBY switch on the camcorder down when not recording to save battery power [a].
A smooth transition between scenes can be made even if recording is stopped and started again. While
positioning the subject, selecting an angle, or looking at the viewfinder, the lens moves automatically
and the battery is used. The battery is also used when a cassette is inserted or removed.

When to Replace the Battery Pack
While you are using your camcorder, the remaining battery indicator decreases gradually as battery
power is used up.

When the remaining battery indicator reaches the lowest point, the i indicator appears and starts
flashing in the viewfinder. [b]
When the i indicator in the viewfinder changes from slow flashing to rapid flashing while you are
recording, set the POWER switch to OFF on the camcorder and replace the battery pack. Leave the
tape in the camcorder to obtain smooth transition between scenes after the battery pack is replaced.

[b]

START/
STOP
LOCK
STANDBY

Additional Information

[a]

PHOTO STANDBY

Notes on the Rechargeable Battery Pack
Caution
Never leave the battery pack under temperatures above 140 ˚F (60 ˚C), such as in a car parked in the
sun or under direct sunlight.

Tips for Using the Battery Pack
The Battery Heats Up
During charging or recording, the battery pack heats up. This is caused by energy that has been
generated and a chemical change that has occurred inside the battery pack. This is not cause for
concern.

Battery Care
• Remove the battery pack from the camcorder after using the battery pack, and keep it in a cool place.
When the battery pack is attached to the camcorder, a small amount of current flows to the
camcorder even if the POWER switch is set to OFF, which shortens battery life.
• The battery pack is always discharging even when it is not in use after charging. Therefore, you
should charge the battery right before using the camcorder.

The Switch on the Battery Pack
This switch is provided to help you remember the charging status of the battery. Set the switch to the
“green mark” position after charging. (When detached from the Charge adaptor, the switch exposes
the green mark. When detached from your camcorder, no mark is indicated.) [c]

[c]

The Life of the Battery Pack
If the i indicator flashes rapidly just after turning on the camcordrer with a fully charged battery
pack, the battery pack should be replaced with a new fully charged one.

Charging Temperature
You should charge batteries at temperatures from 50°F to 86°F (from 10°C to 30°C). Lower
temperatures require a longer charging time.

Notes on Charging
A Brand-new Battery
A brand-new battery pack is not charged. Before using the battery pack, charge it completely.

Recharge the Battery Pack Whenever You Like
You do not have to discharge it before recharging. If you charged the battery pack fully but you did
not use it for a long time, it becomes discharged. So recharge the battery pack before use.

Notes on the Terminals
Keep the Terminals Clean
If a foreign object comes into the terminals, remove it with a soft stick and repeat installing and
removing the battery pack. This improves the contact condition.

Be Sure to Observe the Following

•
•
•
•

Keep the battery pack away from fire.
Keep the battery pack dry.
Do not open nor convert the battery pack.
Do not expose the battery pack to any mechanical shock.

Maintenance Information and Precautions
Moisture Condensation
If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside
the camcorder, on the surface of the tape, or on the lens. If this happens, the tape may stick to the head
drum and be damaged or the camcorder may not operate correctly. To prevent possible damage under
these circumstances, the camcorder is furnished with moisture sensors. However, take the following
precautions.

Inside the Camcorder
When { and 6 indicators flash in the viewfinder, moisture has condensed inside the camcorder. If this
happens, none of the functions except cassette ejection will work.
Eject the cassette, turn off the camcorder, and leave it with the cassette compartment open for
about 1 hour.
If the { indicator does not light up when you turn on the power, you can use the camcorder again.

On the Surface of the Tape
If there is moisture on the surface of the tape, when you insert cassette and press a tape transport
button (·PLAY, etc.), the 6 indicator flashes in the viewfinder. If this happens, none of the functions
except cassette ejection will work.
Eject the cassette and leave it for about 1 hour.
If the 6 indicator does not light up when you insert the cassette and press a tape transport button, you
can use the camcorder again.

On the Lens
No indicator will appear, but the picture becomes dim. Turn off the power and do not use the
camcorder for about 1 hour.

When bringing the camcorder from a cold place to a warm place, put the camcorder in a plastic bag
and allow it to adapt to room conditions over a period of time.
(1) Be sure to tightly seal the plastic bag containing the camcorder.
(2) Remove the bag when the air temperature inside it has reached the temperature surrounding it
(after about 1 hour).

Additional Information

How to Prevent Moisture Condensation

Maintenance Information and Precautions
Removing Dust from Inside the Viewfinder
(1) While holding down the hook, slide the eyecup in the direction of the arrow and remove it out.
(2) Clean the surface with a commercially available blower.

To reattach the eyecup
Do step 1 above sliding the eyecup in the reverse direction of the arrow.

Video Head Cleaning
To ensure normal recording and clear pictures, clean the video heads often. When the v indicator
flashes in the viewfinder or mosaic noise appears on the playback picture or part of the picture
remains, the video heads may be dirty.

[a]

[b]

[a] Slight contamination
[b] Critical contamination
If this happens, clean the video heads with the Sony DVM12CL cleaning cassette (not supplied). After
checking the picture, if it is still “noisy”, repeat the cleaning. (Do not repeat cleaning more than 5
times.)
Caution
Do not use a commercially available wet-type cleaning cassette. It may damage the video heads.
Note
If the DVM12CL (not supplied) cleaning cassette is not available in your area, consult your nearest Sony
dealer.

Precautions
Camcorder Operation
• Operate the camcorder using 7.2 V (battery pack), or 8.4 V (AC power adaptor).
• For DC or AC operation, use only the accessories recommended in this manual.
• Should any solid object or liquid fall into the casing, unplug the camcorder and have it checked by
your nearest Sony dealer before operating it any further.
• Avoid rough handling or mechanical shock. Be particularly careful of the lens.
• Keep the POWER switch set to OFF when not using the camera.
• Do not wrap up the camcorder and operate it since heat may build up internally.
• Keep the camcorder away from strong magnetic fields or mechanical vibration.

On Handling Tapes
• Do not insert anything into the small holes on the cassette.
• Do not open the tape protect cover or touch the tape.
• Avoid touching or damaging the terminals. To remove dust, clean the terminals with a soft cloth.

Camcorder Care
• When the camcorder is not to be used for a long time, disconnect the power source and remove the
cassette. Periodically turn on the power, operate the CAMERA and VTR sections and play back a
tape for about 3 minutes.
• Clean the camcorder body with a soft dry cloth, or a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of solvent which may damage the finish.

AC Power Adaptor
Charging
• Use only a lithium ion type battery.
• Charge the battery on a flat place without vibration.
• The battery will get hot during charging. However, this is normal.

Additional Information

Others
• Unplug the unit from the wall outlet when not in use for a long time. To disconnect the cord, pull it
out by the plug. Never pull the cord itself.
• Do not operate the unit with a damaged cord or if the unit has been dropped or damaged.
• Do not bend the AC power cord forcibly, or put a heavy object on it. This will damage the cord and
may cause a fire or an electrical shock.
• Be sure that nothing metallic comes into contact with the metal parts of the connecting plate. If this
happens, a short may occur and the unit may be damaged.
• Always keep the metal contacts clean.
• Do not disassemble the unit.
• Do not apply mechanical shock or drop the unit.
• While the unit is in use, particularly during charging, keep it away from AM receivers and video
equipment because it will disturb AM reception and video operation.
• The unit becomes warm while in use. This is normal.
• Do not place the unit in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
If any difficulty should arise, unplug the unit and contact your nearest Sony dealer.

Trouble Check
If you run into any problem using the camcorder, use the following table to troubleshoot the problem.

Camcorder
Power
Symptom

Cause and/or Corrective Actions

The power is not on.

• Insert the battery pack. (p. 7)
• The battery is dead.
m Use a charged battery pack. (p. 6)
• Connect the AC power adaptor to a wall outlet. (p. 18)

The power goes off.

• While being operated in CAMERA mode, the camcorder has
been in the Standby mode for more than 5 minutes.
m Turn STANDBY down once and turn it up again. (p. 11)

The battery pack is quickly
discharged.

• The battery is dead.
m Use a charged battery pack. (p. 6)
• The ambient temperature is too low. (p. 63)
• Charge the battery pack again. (p. 6)
• The battery pack is completely dead and cannot be
recharged.
m Use another battery pack. (p. 64)

Operation

Symptom

Cause and/or Corrective Actions

START/STOP does not operate.

• The tape is stuck to the drum.
m Eject the tape. (p. 9)
• Rewind the tape or use a new one. (p. 16)
• Set the POWER switch to CAMERA. (p. 10)
• The tab on the cassette is out (red).
m Use a new tape or slide the tab. (p. 9)
• Set the Standby switch to STANDBY. (p. 10)

The cassette cannot be removed from the
holder.

• Insert the battery pack. (p. 7)
• The battery is dead.
m Use a charged battery pack or the AC power adaptor. (p.
6, 18)

No function except for cassette ejection
works.

• Moisture condensation has occurred.
m Remove the cassette and leave the camcorder for at least
an hour. (p. 65)

The tape does not move when a tape
transport button is pressed.

• Set the POWER switch to VTR. (p. 16)
• Rewind the tape or use a new one. (p. 16)
• The camcorder is updating the cassette memory
data (The cassette memory mounted mini-DV
cassette only).
m Eject the cassette after C MEMORY indicator disappears.
(p. 9)

The STEADY SHOT function does not
active.

• Set the STEADY SHOT to ON. (p. 48)

The autofocus function does not active.

• Set the FOCUS switch to AUTO. (p. 33)
• Shooting condition is not good enough to focus
automatically.
m Focus manually. (p. 32)

Operation
Symptom

Cause and/or Corrective Actions

D ZOOM mode in the menu system
cannot be set to ON.

• Set the DIGITAL MODE to ZOOM. (p. 22)

The overlap function does not active.

• Set the DIGITAL MODE to OVERLAP. (p. 24)

Sound level meter does not activate while
recording.

• Insert a cassette. (p. 9)

Picture/Sound
Symptom

Cause and/or Corrective Actions

The image on the viewfinder screen is not
clear.

• Adjust the viewfinder lens. (p. 11)

The playback picture is not clear or cannot
be monitored.

• Select the channel or input for the camcorder correctly on
the TV. (p. 15)

A vertical band appears when a subject
such as lights or a candle flame is shot
against a dark background.

• The contrast between the subject and background is too
high. The camcorder is not malfunctioning.
m Change locations.

The picture is ”noisy” or hardly visible.

• The video heads may be dirty.
m Clean the heads using the Sony DVM12CL (not supplied)
cleaning cassette. (p. 66)

v indicator flashes in the viewfinder.

• The video heads may be dirty.
m Clean the heads using the Sony DVM12CL (not supplied)
cleaning cassette. (p. 66)

Battery remaining indicator does not
indicates full ı, when you insert the
charged battery pack.

• The ambient temperature is too low.

While editing using the DV connecting
cable, recording picture cannot be
monitored.

• Remove the DV connecting cable, and connect again.

Others
Cause and/or Corrective Actions

The supplied Remote Commander does
not work.

• Set the COMMANDER to VTR4 or ID in the menu system.
(p. 20)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The batteries are dead.
m Insert new ones. (p. 77)

Additional Information

Symptom

Trouble Check
AC Power Adaptor
Symptom

Cause and/or Corrective Actions

The POWER lamp does not light.

• Disconnect the AC power cord. After about one minute, try
again. (p.18)

The CHARGE lamp flashes.

• See the following chart.

When the CHARGE Lamp Flashes
Check through the following chart.

Remove the battery pack from the
AC power adaptor. Then attach the
same battery pack again.

4
4
Please contact your nearest Sony
dealer in connection with the
product with the problem.

When the CHARGE lamp does not flash
again:
If the charging status shown by the
CHARGE lamp proceeds within 1 hour,
there is no problem.

4
When the CHARGE lamp flashes
again:
The problem is with the AC power
adaptor.

When the CHARGE lamp flashes
again:
Attach another battery pack.

When the CHARGE lamp does not flash
again:
If the charging status shown by the CHARGE
lamp proceeds within 1 hour, the problem is
with the battery pack first attached.

Specifications
Video Camera
Recorder
System

S video output
4-pin mini DIN
Luminance signal: 1 Vp-p, 75Ω,
unbalanced, sync negative
Chrominance signal: 0.286 Vpp, 75Ω, unbalanced
Video output
RCA pin-jack, 1 Vp-p, 75Ω,
unbalanced, sync negative
Audio output
RCA pin-jacks (2: stereo L and
R) 327 mV, (at load impedance
47 kΩ) impedance less than 2.2
kΩ
RFU DC OUT
Special mini-jack, DC 5 V
Headphones jack
Stereomini-jack (ø 3.5 mm)
LANC control jack
Stereomini-mini-jack (ø 2.5
mm)
MIC jack
Stereomini-jack, 0.388 mV low
impedance with 2.5 – 3 V
DC output, impedance 6.8 kΩ
(ø 3.5 mm)
DC input
4-pin connector
DV input/output
4-pin special connector

General
Power requirement
On battery mounting surface
7.2 V (battery pack)
8.4 V (AC power adaptor)
Average power consumption
9.5 W (camera recording)
Installation
Vertically, horizontally
Operating temperature
32 °F to 104 °F (0 °C to 40 °C)
Storage temperature
–4 °F to 140 °F (–20 °C to 60 °C)
Dimensions
Approx. 4.3 × 5.7 × 13.0 inches
(w/h/d) (110 × 144 × 329 mm)

Mass
Approx. 3 lb 1 oz (1.4 kg)
excluding the battery pack,
cassette
Approx. 3 lb 6 oz (1.6 kg)
including the battery pack
NP-720/F730, lithium battery
CR2025, cassette DVM60ME,
and shoulder strap
Microphone
Electret condenser microphone,
stereo type

AC Power Adaptor
Power requirements
100 – 240 V AC, 50/60 Hz
Power consumption
25 W
Output voltage
DC OUT: 8.4 V, 1.8 A in
operating mode
Battery charge terminal: 8.4 V,
1.4 A in charging mode
Application
Sony battery packs NP-720/
F730 lithium ion type
Operating temperature/
Storage temperature
Same specifications as video
camera recorder.
Dimensions
Approx. 23/16 × 13/4 × 43/16
inches (w/h/d) (56 × 44 × 107
mm) including projecting parts
and controls
Mass
Approx. 6.7 oz (190 g)

Design and specification are
subject to change without
notice.

Additional Information

Video recording system
Two rotary heads, Helical
scanning system
Audio recording system
Rotary heads, PCM system
Video signal
NTSC color, EIA standards
Usable cassette
mini DV cassette with logo
printed
Tape speed
Approx. 3/4 inches (18.81 mm)/
s
Recording time
1 hour (DVM60ME)
Playback time
1 hour (DVM60ME)
Fast forward/rewind time
Approx. 2 min. 30 s
(DVM60ME)
Image device
3CCD (Charge Coupled
Device 1/3”)
Viewfinder
Electric viewfinder (colour)
Lens
10x (optical)
f = 1/4 to 25/16 inches (5.9 to 59
mm)
15/8 to 169/16 inches (42 to 420
mm) when converted into a 35mm still camera
F = 1.6 to 2.1
Filter diameter 2 1/8 inches (52
mm)
TTL autofocus system
Inner focus wide macro system
Color temperature
Auto/Indoors (3200K)/
Outdoors (5800K)
Minimum illumination
4 lx (F 1.6)
Illumination range
4 lx to 100,000 lx
(recommended more than 100
lx)
Shutter speed control
1/4 to 1/10000

Input and output
connectors

Identifying the Parts
Camcorder
1

2
3
4

!¡
!™

!£
!¢
!∞
!§
!¶

!•

5
6
7

1 Remote sensor (p. 79)
2 CP CHECK button (p. 49)
3 EDITSEARCH buttons (p. 14)
4 RELEASE knob (p. 8)
5 POWER switch (p. 10)
6 HOLD/AUTO LOCK selector (p. 31)
7 CONTROL dial (p. 34)
8 OPEN knob (p. 7)
9 ZERO SET MEMORY button (p. 25)
0 Viewfinder lens adjustment ring (p. 11)
!¡ Hooks for shoulder strap (p. 76)
!™ STEADY SHOT switch (p. 48)
!£ Menu operation buttons (p. 20)
!¢ Lithium battery cover (p. 59)
!∞ DIGITAL MODE switch (p. 24)
!§ DV IN/OUT jack (p. 54)
!¶ ∑ (one push white balance) button (p. 43)
!• SELF TIMER button (p. 30)

!º

!ª
@™
@º
@¡

@£
@¢
@∞
@§

!ª Accessory shoe
@º Display window (p. 81)
@¡ EJECT switch (p. 9)
@™ Zoom button (p. 12)
@£ REC LEVEL (recording level) button (p. 46)
@¢ WHT BAL (white balance) button (p. 43)
@∞ SHUTTER SPEED button (p. 40)
@§ PROGRAM AE button (p. 34)
Additional Information

Identifying the Parts

@¶
@•
@ª
#º
#¡

#£
#¢
#∞
#§
#¶

#™

#•
#ª

@¶ Carrying handle
@• Microphone
@ª Camera recording lamp
#º Remote sensor (p. 79)
#¡ Hooks for shoulder strap (p. 76)
#™ Lens hood
You can attatch a wide teleconversion lens (not supplied) by removing the lens hood.
To remove the lens hood for attachment of the wide teleconversion lens, etc., loosen the lens hood
fixing screw, and unscrew the lens hood counterclockwise.
#£ REC START/STOP button for low-position recording (p. 13)
#¢ Tape transport buttons (p. 16)
<'/7> FRAME (direction select/frame-by-frame), &SLOW (slow speed playback),
rREC (DV IN) (recording using DV IN connector), πSTOP, 0REW (rewind), ·PLAY
(playback), )FF (fast-forward), PPAUSE
#∞ ND FILTER switch (p. 41)
#§ EXPOSURE button and dial (p. 38)
#¶ FOCUS switch and PUSH AUTO button (p. 32)
#• FADER/OVERLAP button (p. 23)
#ª Focus ring (p. 32)

$∞
$º
$¡

$§

$™
$£

$¶
$•
$ª
%º

$¢

%¡
%™

$º Camera recording lamp
$¡ PHOTO button (p. 27)
$™ lLANC control jack
l stands for Local Application Control Bus System. The l control jack is used for controlling the
tape transport of video equipment and peripherals connected to it. This jack has the same function
as the jack indicated as CONTROL L or REMOTE.
$£ 2 (headphones) jack (p. 16)
$¢ PEAK lamp
$∞ MIC (PLUG IN POWER) jack
Connect an external microphone (not supplied). This jack also accepts a “plug-in-power”
microphone.
$§ DC IN jack (p. 18)

$• RFU DC OUT (p. 15)
$ª Audio/Video output jack (p. 15)
%º Standby selector (p. 10)
%¡ START/STOP button (p. 10)

Additional Information

$¶ S VIDEO output jack (p. 15)

%™ Tripod receptacle (p. 13)

Identifying the Parts
Attaching the shoulder strap
Attach the supplied shoulder strap to the hooks for the shoulder strap (!¡ and #¡ on page 72and 74).

Remote Commander
1
2
3
4
5
6

7
8
9
!º
!¡

1 Transmitter
Point toward the remote sensor to control the camcorder after turning on the POWER switch on
the camcorder.
2 PRINT button (p. 27)
3 PHOTO button (p. 27)
4 ZERO SET MEMORY button (p. 25)
5 DATA CODE button (p. 53)
6 DISPLAY button (p. 17)
7 VTR4/ID/HOLD selector (p. 78)
Select VTR4 or ID, the same setting as COMMANDER in the menu system. Select HOLD to
prevent the buttons from being accidentally pressed.
8 START/STOP button

9 Zoom button
The zooming speed is unchangeable on the Remote Commander.

!º Tape transport buttons (p. 16)
0REW (rewind), ·PLAY (playback), )FF (fast-forward), πSTOP, '/7 (frame-by-frame),
PPAUSE, &SLOW (slow speed playback), x2 (double speed playback)
!¡ SEARCH SELECT/≠/± buttons (p. 51)

Preparing the Remote Commander
To use the Remote Commander, you must insert two size AA (R6) batteries. Use the supplied size AA
(R6) batteries.
(1) Remove the battery cover from the Remote Commander.
(2) Insert both of the size AA (R6) batteries with correct polarity.
(3) Put the battery cover back onto the Remote Commander.

To avoid damage from possible battery leakage
Remove the batteries when you will not use the Remote Commander for a long time.

Using the Remote Commander
Make sure that the COMMANDER mode is not set to OFF in the menu system.

Additional Information

Identifying the Parts
About the ID of the Remote Commander
You can avoid misoperation from other remote commanders by setting the VTR4/ID/HOLD selector
to ID. Use the supplied Remote Commander when you set the selector to ID. When you use the
Remote Commander for the first time, register the ID following the procedure below. Once you
register the ID, you do not need to do again.
(1) Slide OPEN and open the battery cover.
(2) Press MENU to display the menu in the viewfinder.
(3) Press > or . to select COMMANDER, then press EXECUTE.
(4) Press > or . to select ID SET.
(5) Set the VTR4/ID/HOLD selector on the Remote Commander to ID.
(6) Point the Remote Commander at the camcorder and press STOP on the Remote Commander.
After the beep sound, the ID of the Remote Commander is registered, and the COMMANDER is set to
ID in the menu system.
(7) Press MENU to erase the menu display.

5
6

VTR 4 ID HOLD

3,
4

STOP

EXECUTE

7
MENU

When the BEEP is set to OFF in the menu system
The beep does not sound at step 6.

Remote Control Direction
Aim the Remote Commander to the remote sensor.
The operative range of the Remote Commander is about 5 m indoors. Depending on the angle, Remote
Commander may not activate the camcorder.

Remote sensor

Notes on the Remote Commander
• Keep the remote sensor away from strong light sources such as direct sunlight or illumination.
Otherwise, the remote control may not be effective.
• Be sure that there is no obstacle between the remote sensor and the Remote Commander.
• This camcorder works at commander mode VTR 4 or ID. The commander modes (VTR 4 or ID) are
used to distinguish this camcorder from other Sony VCRs to avoid remote control misoperation. If
you use another Sony VCR at commander mode ID, we recommend you change the commander
mode or cover the remote sensor of the VCR with black paper.
• You do not need to register the ID again once you have done so. Set the COMMANDER to ID in the
menu system, and set the VTR4/ID/HOLD selector ID on the Remote Commander to ID.
• The registered ID is not erased even if you replace the lithium battery.
Additional Information

Identifying the Parts
In the Viewfinder

!º

!¡
!™

3
ND ON

1000
F2 . 8
0 dB

FADER

5
6
7

16BIT
PHOTO
C MEMORY

!£
!¢
!∞
!§

7.5

0:13:46

1 Focus indicator (p. 32)
2 ND filter indicator (p. 41)
3 White balance indicator (p. 44)
4 Zoom indicator (p. 12)
5 PROGRAM AE mode/fading indicators (p. 23, 34)
6 Warning indicator (p. 82)
7 Audio recording level indicator (p. 46)
8 Steady shot indicator (p. 48)
9 Time code (p. 11)
!º Recording/battery indicator
!¡ Custom presetting (p. 50)
!™ Tape transport mode
!£ Self-timer indicator (p. 30)
!¢ Audio mode indicator (p. 83)
!∞ Photo recording indicators (p. 27)
!§ Cassette memory indicator (p. 9)
!¶ Remaining tape indicator
!• Remaining battery indicator (p. 63)

STBY

!¶
!•

In the Display Window

MEMORY

v §
{

4 5 6 7

ı
tAS

AMPM

88.88dB
8 9

88.888

!º

†

min

∑
18.

e
!¡

!™

1 Time code (p. 11)
2 MEMORY indicator (p. 25)
Same as ZERO SET MEMORY indicator in the viewfinder.
3 Warning indicators (p. 82)
4 Remaining battery indicator (p. 63)
5 Lights up while cassette is inserted
6 Remaining tape indicator
7 Audio recording level indicator (p. 46)
8 PROGRAM AE mode indicator (p. 34)
9 Lights up while displaying the date and time

!¡ White balance indicators (p. 43)
!™ Self-timer indicator (p. 30)

Additional Information

!º Manual adjustment value/date and time

Warning Indicators
If indicators flash in the viewfinder, or a caution lamp on the camcorder flashes, check the following:
: You can hear the beep sound when the BEEP is set to ON.

!º

C MEMORY
4.7 1995

1 Battery Remaining
Slow flashing: The battery is weak.
Fast flashing: The battery is dead.
2 The tape is near the end.
3 The tape has run out.
4 No tape has been inserted.
5 The tab on the tape is out (red). (p. 9)
6 Moisture condensation has occurred. (p. 65)
7 The video heads may be contaminated. (p. 66)
8 Some other trouble has occurred.
Eject the cassette. If it remains lit, disconnect the power source and contact your Sony dealer or
local authorized facility.
9 The lithium battery is weak or the lithium battery is not installed. (p. 58)
This indicator flashes five times when the power is turned on, then disappears.
!º Updating the cassette memory data. Use after C MEMORY indicator disappears.
The cassette compartment automatically lifts up and opens after the indicator disappears.

Glossary
Audio mode (p. 22, p. 61)
There are two modes on DV format:
• 12-bit mode which records two stereo sounds such as stereo 1 and stereo 2
• 16-bit mode which records a stereo sound
This camcorder records sound in stereo 1 in 12-bit mode only, but can play back a tape recorded in
both modes.
Cassette memory (p. 51)
Cassette memory-mounted DV format cassette can store:
– Index information such as recorded date or time,
– Camera information such as F value or shutter speed,
– Standard tape information that can also be stored on a DV format cassette lacking cassette memory,
etc.
DV format (p. 61)
Newly developed consumer digital VCR format. For higher quality pictures and sound, video and
audio signals are recorded on a tape as digital signals.
Gain (p. 49)
Amplification of video signal strength. Shift the gain up when the subject is too dark, but shifting the
gain too much makes the noise increase.
ID-2 system
This camcorder has the ID-2 system which communicates a control signal to provide copyright
protection in an analog connection.
Iris (p. 35)
Same as lens diaphragm. Adjustable lens-opening mechanism.
ND filter (p. 41)
Optical filter for decreasing the quantity of light without adjusting iris or shutter speed. This
camcorder has a built-in ND filter and turns the filter on/off is switchable.

PROGRAM AE (p. 34)
The selectable recording mode to fit the subject or shooting situation
In this camcorder, four PROGRAM AE modes (auto mode is included) are selectable.
Remote Commander mode (p. 78)
The type of Remote control signal. There are five types (VTR1, VTR2, VTR3, VTR4, and ID) to prevent
misoperation between the Remote Commanders of Sony video products. Select VTR4 or ID to control
this camcorder. Normally select VTR4, and select ID to prevent misoperation.

Additional Information

NTSC system (p. 57)
TV color system standard used in USA, Canada, and other parts of the world. An NTSC-recorded tape
cannot be played back on the PAL or SECAM system VCR.

RFU adaptor (p. 15)
Converts video and audio signals into a television wave signal to playback a picture at a TV channel.
S video output jack (p. 15)
Separates the video signal into chrominance and luminance (black and white) signals to get a clear
picture.

Glossary
Shutter speed (p. 40)
The amount of time the shutter is open. The faster the shutter speed is the less blurring occurs even if
shooting a moving subject. This camcorder adjusts shutter speed automatically depending on the
speed of the subject, or it can be adjusted manually (selectable).
Standby Mode (p. 10)
The camcorder is ready to start recording, recording standby mode. To set standby mode, turn
STANDBY up.
Time code (p. 11)
The time code indicates the frame-by-frame position of the tape as a serial number of hour, minute,
second, and frame. As the picture and counter reading are identical, you can locate a desired scene
precisely with the counter.
This camcorder uses the drop frame mode which adjusts the difference between the logical time code
(running at 30 frames/s) and real NTSC system time code (running at 29.97 frames/s) so that the two
are in sync.
White balance (p. 43)
Adjusts the color balance so that white subjects look white. In this camcorder, automatic adjustment,
manual adjustment, w(outdoor), and e(indoor) are selectable.
Zebra pattern (p. 42)
Diagonal stripes which show the signal level of a subject appear in the viewfinder. The portion of the
picture where the zebra pattern appears is an area of high brightness and overexposure.

Additional Information

Index
A,B
AC power adaptor ...................... 6
Adjusting the sound ................ 46
Adjusting viewfinder .............. 11
A/V connecting cable .............. 15
Battery pack ................................. 6
Beep sound ................................. 10
Brightness ................................... 49

C
Camera recording ..................... 10
Cassette memory ....................... 51
Charging battery ......................... 6
Cleaning video heads .............. 66
Clock set ..................................... 60
Close ups .................................... 33
Color intensity ........................... 49
COMMANDER ......................... 20
Connection ................................. 15
Custom preset ............................ 49

D
DATA CODE ............................. 53
Date/time ................................... 60
Depth of field ............................. 35
Display window ........................ 81
Double speed playback ........... 16
DV connecting cable ................ 54
Digital zooming ......................... 12

E,F,G
Editing ........................................ 54
EDITSEARCH ........................... 14
EJECT ............................................ 9
Eyecup ........................................ 11
Exposure ..................................... 38
Fast-forward .............................. 16
Focus ........................................... 32
Frame-by-frame ......................... 17
Gain-shift .................................... 49

H,I,J,K,L,M
Headphone ................................ 16
ID number .................................. 78
ID system ................................... 78
Iris ............................................... 35
LANC ......................................... 75
Lithium battery ......................... 58
Menu system ............................. 20
MIC (microphone) jack ............ 11

N,O,P,Q
ND filter ..................................... 41
One-push white balance .......... 44

Sony Corporation

Printed in Japan

Overlap ....................................... 24
PEAK lamp ................................ 75
Playback on TV ......................... 16
Playback pause .......................... 16
Power sources ............................ 18
PROGRAM AE .......................... 34

R
Recording lamp ......................... 74
Recording sound level ............. 46
Rec. Review ................................ 14
Remote Commander ................ 76
Rewind ....................................... 16
RFU adaptor .............................. 15

S
Self-timer recording ................. 30
Sharpness ................................... 49
Shoulder strap ........................... 76
Shutter speed ............................. 40
Standby mode ............................ 10
Steady shot ................................. 48
Supplied accessories .................. 5
S video connecting cable ......... 15

T,U,V
Time code ................................... 11
Tripod mounting ....................... 13
Trouble check ............................ 68
Twilight ...................................... 36
Viewfinder ................................. 80
Video printer ............................. 27
Volume balance ......................... 22
VTR4 ........................................... 83

W,X,Y,Z
Warning ...................................... 82
White balance ............................ 43
Zebra pattern ............................. 42
ZERO SET MEMORY .............. 25
Zoom ........................................... 12

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2000:07:11 15:18:06
Producer                        : Acrobat Distiller 3.01 for Power Macintosh
Author                          : Sony Corporation
Creator                         : PageMaker 5.0
Title                           : DCR-VX1000
Modify Date                     : 2000:07:11 15:25:16
Page Count                      : 88

EXIF Metadata provided by EXIF.tools

Sony Dcr Vx1000 Operation Manual

DCR-VX1000 Operation Manual DCRVX1000

User manual DCRVX1000 Sony DCR-VX1000 Digital Camcorder User Manuals and Instruction Guides

Sony DCR-VX1000 Camcorder Operating Guide docget Troubleshoot Sony DCR-VX1000 Camcorder |

DCR-VX1000 - Operation Manual DCRVX1000 Free User Guide for Sony DCR Series Camcorder, Manual - page3

Navigation menu

Versions of this User Manual:

Views

Navigation