Sony Fwd 40Lx1 Protocol Manual 40LX1/32LX1R
Sony-Fwd-32Lx1R-Protocol-Manual-642519 sony-fwd-32lx1r-protocol-manual-642519
Sony-Wega-Fwd-32Lx1R-Users-Manual-293077 sony-wega-fwd-32lx1r-users-manual-293077
Sony Home Theater Screen FWD-42PV1A FWD40LX1_32LX1R
FWD-32LX1R to the manual a5bc724e-f836-37e4-a597-cb01e9269606
2015-03-11
: Sony Sony-Fwd-40Lx1-Protocol-Manual-642543 sony-fwd-40lx1-protocol-manual-642543 sony pdf
Open the PDF directly: View PDF 
.
Page Count: 24
| Download | |
| Open PDF In Browser | View PDF |
FLAT WIDE DISPLAY FWD-40LX1 FWD-32LX1R PROTOCOL MANUAL 1st Edition Table of Contents 1. Communication Parameter ............................................................. 1 2. Pin Configuration .................................................................................. 1 3. Communication Data Format ......................................................... 1 4. General Function ................................................................................... 3 5. Picture/Sound ........................................................................................ 11 6. Size/Shift .................................................................................................. 13 7. Status Enquiry ....................................................................................... 15 8. User Reset ............................................................................................... 18 FWD-40LX1 FWD-32LX1R 1. Communication Parameter 3. Communication Data Format (a) Control (Host → Request of Write to Display) Communication system RS-232C Synchronous system Asynchronous communication No. Item Value Baud rate 9600 bps 1 Header 0x8C:Control Character length 8 bit 2 Category 0xXX Parity None 3 Function 0xXX Start bit 1 bit 4 Data1 (Length) 0xXX Stop bit 1 bit 5 Data2 (Data1) 0xXX Flow control None : : 0xXX : : 0xXX X Data (X-3) 0xXX X+1 Check Sum 0xXX 2. Pin Configuration Display side (D-sub 9-pin) Host side (D-sub 9-pin) FWD-40LX1 FWD-32LX1R Personal computer * Check Sum: Sum total of 1 to X. Lower one-byte data is validated when a value exceeds 255 (1 byte). * Set the command interval to 500 ms or more when transmitting the Control command continuously. * Set the command interval to 500 ms or more when transmitting the same command (Enquiry) after the Control command. (b) Enquiry (Host → Request of Read to Display) 5 4 9 3 8 2 7 1 6 _ External view _ Pin No. 1 2 3 4 5 6 7 8 9 FWD-40LX1 FWD-32LX1R Signal NC RD TD NC GND NC NC NC NC 5 4 9 3 8 2 7 1 6 _ External view _ Pin No. 1 2 3 4 5 6 7 8 9 Signal NC RD TD NC GND NC NC NC NC No. Item Value 1 Header 0x83:Enquiry 2 Category 0xXX 3 Function 0xXX 4 Data1 0xFF 5 Data2 0xFF 6 Check Sum 0xXX * Check Sum: Sum total of 1 to 5. Lower one-byte data is validated when a value exceeds 255 (1 byte). 1 (c) Answer (Display → Response to Host) 1 Answer at the time of Control request 4 Error Answer No. Item Value No. Item Value 1 Header 0x70: Answer 1 Header 0xE0:Answer 2 Answer* 2 Answer* 0x00: No Function Error 0x00: Completed (Normal completion) 0x01: Check Sum Error 0x01: Limit Over (Abnormal completion: Over upper limit) 0x02: Limit Under (Abnormal completion: Under lower limit) 0x03: Command Canceled (Abnormal completion) 3 Check Sum 0xXX * 0x00: Completed Packet is correctly received and process is also correctly completed. 0x01: Limit Over Packet is correctly received, but the data value is over the upper limit. 0x02: Limit Under Packet is correctly received, but the data value is under the lower limit. 0x03: Command Canceled Packet is correctly received, but the data value is not correct or the request cannot be accepted in the current host state. * Check Sum: If the value of a sum total of 1 and 2 exceeds 255 (1 byte), the data of 1 lower byte is effective. 0x02: Data Length Error 3 Check Sum 0xXX * 0x00: No Function Error Packet header, category and function code are not included in this protocol. 0x01: Check Sum Error Check sum value of received packet is not correct. 0x02: Data Length Error Packet is correctly received, but the data size is over the upper limit. * Check Sum: If the value of a sum total of 1 and 2 exceeds 255 (1 byte), the data of 1 lower byte is effective. 2 Answer at the time of Enquiry request (Normal completion) No. Item Value 1 Header 0x70: Answer 2 Answer 0x00: Completed 3 Return Data Size 0xXX 4 Return Data1 0xXX : : 0xXX : : 0xXX X Return Data (X-3) 0xXX X+1 Check Sum 0xXX * 0x00: Completed Completed packet is correctly received and process is also correctly completed. * Return Data returns the read value. * Check Sum: If the value of a sum total of 1 to X exceeds 255 (1 byte), the data of 1 lower byte is effective. 3 Answer at the time of Enquiry request (Abnormal completion) No. Item Value 1 Header 0x70: Answer 2 Answer 0x03: Command Canceled (Abnormal completion) 3 Check Sum 0x73 * 0x03: Command Canceled Packet is correctly received, but the data value is not correct or the request cannot be accepted in the current host state. 2 FWD-40LX1 FWD-32LX1R 4. General Function (a) Mode control Syntax Header Category Function Data1 Data2 Check Sum Control 0x8C 0x00 Code Table(1-a)[a] 0x02 Code Table(1-a)[b] 0xXX Enquiry 0x83 0xFF 0xFF 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x01 0x71 Limit Over 0x70 0x02 0x72 Limit Under 0x70 0x03 0x73 Command Canceled Answer Header Answer Return to Data Size Return Data1 Check Sum Enquiry 0x70 0x00 0x02 Code Table (1-a)[b] 0xXX Completed Code Table(1-a) [a]Function 0x00 0x01 0x02 0x03 0x04 0x05 Power*1 Input Select*2 Force Status Display Audio Mute Auto Status Display Closed Caption FWD-40LX1 FWD-32LX1R [b]Range/Switch Code 0x00 OFF 0x01 ON 0x0A INPUT2 RGB 0x0B INPUT2 COMPONENT 0x0C OPTION1 VIDEO 0x0D OPTION1 S VIDEO 0x0E OPTION1 RGB 0x0F OPTION1 COMPONENT 0x10 OPTION2 VIDEO 0x11 OPTION2 S VIDEO 0x12 OPTION2 RGB 0x13 OPTION2 COMPONENT 0x20 INPUT1 DVI 0x00 ON 0x01 OFF 0x00 OFF 0x01 ON 0x00 ON 0x01 OFF 0x00 OFF 0x01 CC1 0x02 CC2 0x03 CC3 0x04 CC4 Command Control Enquiry Standby Power On Yes Yes Enable Enable Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Enable Enable Yes Yes Disable Enable 3 Code Table(1-a) [a]Function 0x06 Color System 0x0F Language [b]Range/Switch Code 0x00 Auto 0x01 NTSC 0x02 NTSC4.43 0x03 PAL 0x04 SECAM 0x05 PAL-M 0x06 PAL-N 0x07 PAL60 0x00 Japanese 0x01 English 0x02 Deutsch 0x03 Français 0x04 Español 0x05 Italiano Command Control Enquiry Standby Power On Yes Yes Disable Enable Yes Yes Disable Enable 0x10 Index Number 0x01 - 0xFF Yes Yes Disable Enable 0x13 Power Saving 0x00 Standard Yes Yes Disable Enable 0x01 Reduce 0x14 Speaker Out 0x00 ON Yes Yes Disable Enable 0x01 OFF 0x00 1080i Yes Yes Disable Enable 0x01 1035i 0x00 DTV Yes Yes Disable Enable 0x01 PC 0x00 H/Comp Yes Yes Disable Enable 0x01 Video 0x00 OFF Yes Yes Disable Enable No Yes Disable Enable 0x16 HD Mode 0x17 RGB Mode 0x18 Sync Mode 0x1B Clock Display 0x1B ON 0x24 Input Detect(Option1) 0x00 FW12(HD15) 0x01 FW10(CVBS, Y/C) 0x02 FW11(BNC) 0x03 Reserved 0x04 FW31/32 0x05 FW50 0x06 Reserved 0x07 Reserved 0x08 Reserved 0x09 Reserved 0x0A Reserved 0x0B Reserved 0x0C Reserved 0x0D Reserved 0x0E Reserved 4 (Continued) FWD-40LX1 FWD-32LX1R Code Table(1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On 0x24 Input Detect(Option1) 0x0F Not Connect No Yes Disable Enable 0x25 Input Detect(Option2) 0x00 FW12(HD15) No Yes Disable Enable 0x01 FW10(CVBS, Y/C) 0x02 FW11(BNC) 0x03 Reserved 0x04 FW31/32 Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable 0x05 FW50 0x06 Reserved 0x07 Reserved 0x08 Reserved 0x09 Reserved 0x0A Reserved 0x0B Reserved 0x0C Reserved 0x0D Reserved 0x0E Reserved 0x0F Not Connect 0x26 0x30 0x31 Auto Shut OFF PAP*2 Active Picture 0x00 OFF 0x01 ON 0x00 OFF 0x01 P&P 0x02 PinP 0x00 Left(P&P)/Main(PinP) 0x01 Right(P&P)/Sub(PinP) 0x02 Swap*2 0x32 Picture Size(P&P) 0x00 - 0x0E Yes Yes Disable Enable 0x33 Sub Picture Size (PinP) 0x00 Large Yes Yes Disable Enable 0x01 Small 0x00 Position1 Yes Yes Disable Enable 0x01 Position2 0x02 Position3 0x03 Position4 No Yes Disable Enable 0x34 0x35 Picture Position(PinP)*3 PAP Input Detect (Left/Main) 0x0A INPUT2 RGB 0x0B INPUT2 COMPONENT 0x0C OPTION1 VIDEO 0x0D OPTION1 S VIDEO 0x0E OPTION1 RGB 0x0F OPTION1 COMPONENT FWD-40LX1 FWD-32LX1R 0x10 OPTION2 VIDEO 0x11 OPTION2 S VIDEO 0x12 OPTION2 RGB 0x13 OPTION2 COMPONENT (Continued) 5 Code Table(1-a) [a]Function [b]Range/Switch Code 0x35 PAP Input Detect (Left/Main) 0x20 INPUT1 DVI 0x36 PAP Input Detect (Right/Sub) 0x0A INPUT2 RGB Command Control Enquiry Standby Power On No Yes Disable Enable No Yes Disable Enable 0x0B INPUT2 COMPONENT 0x0C OPTION1 VIDEO 0x0D OPTION1 S VIDEO 0x0E OPTION1 RGB 0x0F OPTION1 COMPONENT 0x10 OPTION2 VIDEO 0x11 OPTION2 S VIDEO 0x12 OPTION2 RGB 0x13 OPTION2 COMPONENT 0x20 INPUT1 DVI *1: Transmit the next command 10 seconds after Power On and Power Off commands are transmitted. If not, correct data may not be able to be acquired. *2: For INPUT SELECT, PAP, and Active Picture (SWAP), check the busy state using a Busy to INPUT command. *3: The Picture Position arrangement is as shown below. 1 2 3 4 Code Table(1-a) [a]Function [b]Range/Switch code Command Control Enquiry Standby Power On 0x43 BackLight 0x00 - 0x64 Yes Yes Disable Enable 0x44 Illumination 0x00 OFF Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Enable Enable Yes Yes Enable Enable 0x01 Low 0x02 High 0x45 Control Mode 0x00 Main+Remocon 0x01 Main 0x02 Remocon 0x46 On Off Timer Mode 0x47 On Timer Enable 0x00 Every Day 0x01 Day Of Week 6 bit0 Sunday 1:Enable, 0:Disable bit1 Monday 1:Enable, 0:Disable bit2 Tuesday 1:Enable, 0:Disable bit3 Wednesday 1:Enable, 0:Disable bit4 Thursday 1:Enable, 0:Disable bit5 Friday 1:Enable, 0:Disable bit6 Saturday 1:Enable, 0:Disable bit7 Every day 1:Enable, 0:Disable*4 FWD-40LX1 FWD-32LX1R Code Table(1-a) [a]Function 0x48 0x65 [b]Range/Switch code Off Timer Enable IP Setting Mode bit0 Sunday 1:Enable, 0:Disable bit1 Monday 1:Enable, 0:Disable bit2 Tuesday 1:Enable, 0:Disable bit3 Wednesday 1:Enable, 0:Disable bit4 Thursday 1:Enable, 0:Disable bit5 Friday 1:Enable, 0:Disable bit6 Saturday 1:Enable, 0:Disable bit7 Every day 1:Enable, 0:Disable*4 0x00 DHCP Command Control Enquiry Standby Power On Yes Yes Enable Enable Yes Yes Enable Enable No Yes Enable Enable Yes No Enable Enable Yes Yes Enable Enable 0x01 Manual 0x02 Speed 0x66 IP Setting Execute 0x00 No 0x01 Yes 0x67 IP Setting Result 0x00 Done 0x01 Error 1 (UART Commu.) 0x02 Error 2 (Duplication) 0x03 Error 3 (IP Add Setting) 0x04 Error 4 (GW Add Setting) 0x05 Error 5 (DNS1 Setting) 0x06 Error 6 (DNS2 Setting) 0x07 Error 7 (Sbnt Msk Setting) 0x68 Speed Setting 0x00 100Mbps/Full Duplex 0x01 100Mbps/Half Duplex 0x02 10Mbps/Full Duplex 0x03 10Mbps/Half Duplex 0x04 Auto *4: For every day, all bits should be put in the same state. (Enable:0xff, Disable:0x00) (b) Color matrix Syntax Header Category Function Data1 Data2 Data3 Data3 Control Code Table (1-b)[a] 0x04 Code Table (1-c) Code Table (1-b)[b] Code Table (1-d) 0xXX 0x8C 0x00 Check Sum Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 Code Table(1-b)[a] Code Table (1-c) Code Table (1-d) 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x03 0x73 Command Canceled Answer Header Answer Return to Data Size Return Data1 Enquiry 0x00 Code Table (1-c) Code Table (1-b)[b] Code Table(1-d) 0xXX FWD-40LX1 FWD-32LX1R 0x70 0x04 Return Data2 Return Data3 Check Sum Completed 7 Code Table(1-b) [a]Function [b]Range/Switch code 0x1D Color Matrix 0x00 YCbCr Command Control Enquiry Standby Power On Yes Yes Disable Enable 0x01 YPbPr Code Table(1-c) Format Select 0x00 480p 0x01 1080i 0x02 720p 0x03 480i Code Table(1-d) Input Select 0x00 Input2 0x01 Option1 0x02 Option2 (Invalid for FWD-32LX1R) (c) Time control Clock Set (Hour, Minute) Syntax Header Category Function Data1 Data2 Data3 Check Sum Control 0x8C 0x00 0x22 0x03 Hour:0x00 - 0x17 Minute:0x00 - 0x3B 0xXX Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 0x22 0xFF 0xFF 0xA3 Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x01 0x71 Limit Over 0x70 0x02 0x72 Limit Under 0x70 0x03 0x73 Command Canceled Answer Header Answer Return to Data Size Return Data1 Return Data2 Check Sum Enquiry 0x70 0x00 0x03 Hour:0x00 - 0x17* Minute:0x00 - 0x3B 0xXX Completed * Data of Hour: 0x80 and Minute: 0x00 is set as Return Data when a timer is not set after factory setting. 8 FWD-40LX1 FWD-32LX1R Clock Set (Week) Syntax Header Category Function Data1 Data2 Check Sum Control 0x8C 0x00 0x23 0x02 Week:Code Table(1-e) 0xXX Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 0x23 0xFF 0xFF 0xA4 Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x01 0x71 Limit Over 0x70 0x02 0x72 Limit Under 0x70 0x03 0x73 Command Canceled Answer Header Answer Return to Data Size Return Data1 Check Sum Enquiry 0x70 0x00 0x02 Week:Code Table(1-e) 0xXX Completed Code Table(1-e) Week Select 0x00 Sunday 0x01 Monday 0x02 Tuesday 0x03 Wednesday 0x04 Thursday 0x05 Friday 0x06 Saturday On Timer, Off Timer Syntax Header Category Function Data1 Data2 Data3 Check Sum Control 0x8C 0x00 Code Table(1-f)[a] 0x03 Hour:0x00 - 0x17 Minute:0x00 - 0x3B 0xXX Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 Code Table(1-f)[a] 0xFF 0xFF 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x01 0x71 Limit Over 0x70 0x02 0x72 Limit Under 0x70 0x03 0x73 Command Canceled Answer Header Answer Return to Data Size Return Data1 Return Data2 Check Sum Enquiry 0x70 0x00 0x03 Hour:0x00 - 0x17 Minut:0x00 - 0x3B 0xXX FWD-40LX1 FWD-32LX1R Completed 9 Code Table(1-f) [a]Function [b]Range/Switch code Command Control Enquiry Standby Power On Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable Clock Set 0x22 Hour, Minute 0x23 Week On Timer 0x50 Sunday 0x51 Monday 0x52 Tuesday 0x53 Wednesday 0x54 Thursday 0x55 Friday 0x56 Saturday 0x57 Every day Off Timer 0x58 Sunday 0x59 Monday 0x5A Tuesday 0x5B Wednesday 0x5C Thursday 0x5D Friday 0x5E Saturday 0x5F Every day (d) IP Address Setting IP Address Syntax Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Control 0x8C 0x00 0x42 0x05 Address 0 0x00 - 0xFF Address 1 0x00 - 0xFF Address 2 0x00 - 0xFF Address 3 0x00 - 0xFF 0xXX Subnet Mask Syntax Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Control 0x8C 0x00 0x61 0x05 Address 0 0x00 - 0xFF Address 1 0x00 - 0xFF Address 2 0x00 - 0xFF Address 3 0x00 - 0xFF 0xXX Gateway Address Syntax Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Control 0x8C 0x00 0x62 0x05 Address 0 0x00 - 0xFF Address 1 0x00 - 0xFF Address 2 0x00 - 0xFF Address 3 0x00 - 0xFF 0xXX 10 FWD-40LX1 FWD-32LX1R DNS Primary Syntax Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Control 0x8C 0x00 0x63 0x05 Address 0 0x00 - 0xFF Address 1 0x00 - 0xFF Address 2 0x00 - 0xFF Address 3 0x00 - 0xFF 0xXX DNS Secondary Syntax Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Control 0x8C 0x00 0x64 0x05 Address 0 0x00 - 0xFF Address 1 0x00 - 0xFF Address 2 0x00 - 0xFF Address 3 0x00 - 0xFF 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x03 0x73 Command Canceled Example of IP Address 192.128.14.1 192 (0xC0) Address 0 128 (0x80) Address 1 14 (0x0E) Address 2 1 (0x01) Address 3 * IP Address command can be carried out even in the standby state. Code Table(1-a) [a]Function [b]Range/Switch code 0x42 IP Address 0x61 Subnet Mask 0x62 Gateway Address 0x63 DNS Primary 0x64 DNS Secondary Command Control Enquiry Standby Power On Yes Yes Enable Enable 5. Picture/Sound (a) Picture/Sound Syntax Header Category Function Data1 Data2 Check Sum Control 0x8C 0x10 Code Table(2-a)[a] 0x02 Code Table(2-a)[b] 0xXX Enquiry 0x83 0xFF 0xFF 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x01 0x71 Limit Over 0x70 0x02 0x72 Limit Under 0x70 0x03 0x73 Command Canceled Answer Header Answer Return to Data Size Return Data1 Check Sum Enquiry 0x70 0x00 0x02 Code Table(2-a)[b] 0xXX FWD-40LX1 FWD-32LX1R Completed 11 Code Table(2-a) [a]Function [b]Range/Switch code Command Control Enquiry Standby Power On Contrast 0x00 - 0x64* Yes Yes Disable Enable 0x01 Brightness 0x00 - 0x64* Yes Yes Disable Enable 0x02 Chroma 0x00 - 0x64 Yes Yes Disable Enable 0x03 Phase 0x00 - 0x64 Yes Yes Disable Enable 0x04 Color Temp 0x00 Cool Yes Yes Disable Enable 0x01 Neutral 0x02 Warm 0x03 Color1 0x04 Color2 0x05 Color3 Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable 0x00 0x09 Sharpness 0x00 - 0x0A 0x0A NR 0x00 OFF 0x01 Low 0x02 Mid 0x03 High 0x00 Auto 0x01 OFF 0x00 OFF 0x01 Low 0x02 High 0x0B Cinema Drive 0x0C Dynamic Picture 0x0D 0x0E 0x10 Color Correct Gamma Correct Picture Mode 0x00 ON 0x01 OFF 0x00 High 0x01 Mid 0x02 Low 0x00 Standard 0x01 Vivid 0x02 User1 0x03 User2 0x04 User3 0x30 Volume 0x00 - 0x64 Yes Yes Enable Enable 0x31 Treble 0x00 - 0x64 Yes Yes Disable Enable 0x32 Bass 0x00 - 0x64 Yes Yes Disable Enable 0x33 Balance 0x00 - 0x64 Yes Yes Disable Enable 0x34 Surround 0x00 OFF Yes Yes Disable Enable 0x01 Hall 0x02 Simulate *: The setting value during two-screen display is as follows: Contrast: Setting value ± 12 during one-screen display Brightness: Setting value ± 24 during one-screen display 12 FWD-40LX1 FWD-32LX1R (b) Color temperature Syntax Header Category Function Data1 Data2 Data3 Check Sum Control 0x8C 0x10 Code Table(2-b)[a] 0x03 Code Table(2-c) Code Table(2-b)[b] 0xXX Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x10 Code Table(2-b)[a] Code Table(2-c) 0xFF 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x03 0x73 Command Canceled Answer Header Answer Return to Data Size Return Data1 Return Data2 Check Sum Enquiry 0x70 0x00 0x03 Code Table(2-c) Code Table(2-b)[b] 0xXX Completed Code Table(2-b) [a]Function [b]Range/Switch code 0x05 Red Gain 0x00 - 0x0A 0x06 Green Gain 0x00 - 0x0A 0x07 Blue Gain 0x00 - 0x0A Command Control Enquiry Standby Power On Yes Yes Disable Enable Code Table(2-c) Format Select 0x03 Color1 0x04 Color2 0x05 Color3 6. Size/Shift (a) 8 bit register Syntax Header Category Function Data1 Data2 Check Sum Control 0x8C 0x20 Code Table(3-b)[a] 0x02 Code Table(3-b)[b] 0xXX Enquiry 0x83 0xFF 0xFF 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x01 0x71 Limit Over 0x70 0x02 0x72 Limit Under 0x70 0x03 0x73 Command Canceled FWD-40LX1 FWD-32LX1R 13 Answer Header Answer Return to Data Size Return Data1 Check Sum Enquiry 0x70 0x00 0x02 Code Table(3-b)[b] 0xXX Completed Code Table(3-b) [a]Function [b]Range/Switch code Command Control Enquiry Standby Power On 0x00 H Size 0x00 - 0x64 Yes Yes Disable Enable 0x01 H Center 0x00 - 0x64 Yes Yes Disable Enable 0x02 V Size 0x00 - 0x64 Yes Yes Disable Enable 0x03 V Center 0x00 - 0x64 Yes Yes Disable Enable 0x04 Aspect Yes Yes Disable Enable Yes Yes Disable Enable 0x05 Multi Display 0x00 Wide Zoom 0x01 Zoom 0x02 Full 0x03 Sub Title 0x04 Normal 0x00 OFF 0x01 x2 0x02 x3 0x03 x4 0x07 Dot Phase 0x00 - 0x1F 0x08 Auto Wide 0x00 OFF 0x01 ON 0x00 Normal 0x01 Wide Zoom 0x00 Position1 0x01 Position2 0x02 Position3 0x03 Position4 0x00 Position1 0x01 Position2 0x02 Position3 0x03 Position4 0x04 Position5 0x05 Position6 0x06 Position7 0x07 Position8 0x08 Position9 0x00 Position1 0x01 Position2 0x02 Position3 0x03 Position4 0x04 Position5 0x05 Position6 0x06 Position7 0x09 4:3 Mode 0x0B Multi Position(x2)* 0x0C 0x0D 14 Multi Position(x3)* Multi Position(x4)* Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable Yes Yes Disable Enable FWD-40LX1 FWD-32LX1R Code Table(3-b) [a]Function 0x0D [b]Range/Switch code Multi Position(x4)* 0x07 Position8 0x08 Position9 0x09 Position10 0x0A Position11 0x0B Position12 0x0C Position13 0x0D Position14 0x0E Position15 0x0F Position16 Command Control Enquiry Standby Power On Yes Yes Disable Enable *: The Multi Position arrangement is as shown below. Multi Position(x2) Multi Position(x3) Multi Position(x4) 1 2 1 2 3 1 2 3 4 3 4 4 5 6 5 6 7 8 7 8 9 9 10 11 12 13 14 15 16 7. Status Enquiry (a) Model name enquiry Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x30 0x00 (Code Table(4-d)[a]) 0xFF 0xFF 0xB1 Answer Header Answer Return to Data Size Return Data1 Check Sum Enquiry 0x70 0x00 0x02 Code Table(4-a) 0xXX Completed Code Table(4-a) Format Select 0x0A FWD-40LX1 0x0B FWD-32LX1R (b) Serial number enquiry Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x30 0x01 (Code Table(4-d)[a]) 0xFF 0xFF 0xB2 FWD-40LX1 FWD-32LX1R 15 Answer Header Answer Return to Data Size Return Data1 Return Data2 Return Data3 Return Data4 Check Sum Enquiry 0x00 0x05 Upper 8bit Data Middle Upper Data Middle Lower Data 0x70 Lower 8bit Data 0xXX Completed Return Data1-Data4: 0x001E8480 - 0x002DC6BF(2,000,000 - 2,999,999) (c) Operating time enquiry Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x30 0x02 (Code Table(4-d)[a]) 0xFF 0xFF 0xB3 Answer Header Answer Return to Data Size Return Data1 Return Data2 Return Data3 Return Data4 Check Sum Enquiry 0x00 0x05 Upper 8bit Data Middle Upper Data Middle Lower Data 0x70 Lower 8bit Data 0xXX Completed Return Data1-Data4: 0x00000000 - 0xD693A3FF(0sec._3,599,999,999sec.) (d) Software version enquiry (Main CPU) Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x30 0x03 (Code Table(4-d)[a]) 0xFF 0xFF 0xB4 Answer Header Answer Return to Data Size Return Data1 Return Data2 Check Sum Enquiry 0x70 0x00 0x03 Upper 8bit Data Lower 8bit Data 0xXX Completed Return Data1-Data2: 0x0000 - 0xFFFF Example) For version 1.000, they become 10 and 00, respectively. (e) 8 bit register enquiry Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x30 Code Table(4-b)[a] 0xFF 0xFF 0xXX Answer Header Answer Return to Data Size Return Data1 Check Sum Enquiry 0x70 0x00 0x02 Code Table(4-b)[b] 0xXX Completed Code Table(4-b) [a]Function [b]Return Data 0x07 Digital 3.3 V 0x00 - 0xFF 0x09 Digital 5 V 0x00 - 0xFF 0x0A Temp1 0x00 - 0xFF 0x0D Temp(P/S) 0x00 - 0xFF 0x10 Analog5 V/9 V 0x00 - 0xFF 0x20 Busy to Input 0x00: Not Busy 0x01: Busy 16 Unit 5 V power output FWD-40LX1 FWD-32LX1R (f) Software version enquiry (Scaler) Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x30 0x0F (Code Table(4-d)[a]) 0xFF 0xFF 0xC0 Answer Header Answer Return to Data Size Return Data1 Return Data2 Check Sum Enquiry 0x70 0x00 0x03 Upper 8bit Data Lower 8bit Data 0xXX Completed Return Data1 - Data2: 0x0000 - 0xFFFF Example) For version 1.000, they become 10 and 00, respectively. (g) Shutdown Log enquiry Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x30 0x11 (Code Table(4-d)[a]) 0xFF 0xFF 0xC2 Answer Header Answer Return to Data Size Return Data1 Check Sum Enquiry 0x70 0x00 0x02 Code Table(4-c) 0xXX Completed Return Data1: 0x00 - 0xFF Code Table(4-c) Shutdown Information bit0 Reserved bit1 1: FAN operation is abnormal 0: Normal bit2 1: Backlight is abnormal 0: Normal bit3 1: Temperature sensor is abnormal 0: Normal bit4 1: Main power supply is abnormal 0: Normal bit5 1: Digital power supply is abnormal (3.3 V, 5 V) 0: Normal bit6 1: Analog supply is abnormal (5 V/9 V) 0: Normal bit7 1: Scaler is abnormal 0: Normal Code Table(4-d) [a]Function [b]Range/Switch code Command Control Enquiry Standby Power On 0x00 Model Name 0x0A - 0x0B No Yes Enable Enable 0x01 Serial Number 0x001E8480 - 0x002DC6BF (2,000,000 - 2,999,999) Yes Yes Enable Enable 0x02 Operation Time 0x00000000 - 0xD693A3FF (0sec._3,599,999,999sec.) 0x03 Soft Version(Main) 0x0000 - 0xFFFF No Yes Enable Enable 0x07 Digital 3.3 V 0x00 - 0xFF 0x09 Digital 5 V 0x00 - 0xFF 0x0A Temp1 0x00 - 0xFF 0x0D Temp(P/S) 0x00 - 0xFF 0x0F Soft Version(Scaler) 0x0000 - 0xFFFF 0x10 Analog5 V/9 V 0x00 - 0xFF FWD-40LX1 FWD-32LX1R (Continued) 17 Code Table(4-d) [a]Function [b]Range/Switch code 0x11 Shutdown Log 0x00 - 0xFF 0x12 Digital 3.3 V(Failure) 0x00 - 0xFF 0x13 Digital 5 V(Failure) 0x00 - 0xFF 0x14 Analog5 V/9 V(Failure) 0x00 - 0xFF 0x20 Busy to INPUT* Command Control Enquiry Standby Power On No Yes Enable Enable 0x00 Non Busy 0x01 Busy * Busy to INPUT should be judged by Busy → Non Busy. Busy to INPUT may be incorrectly judged during start when it is judged by only Non Busy. 8. User Reset Syntax Header Category Function Data1 Data2 Check Sum Control 0x8C 0x50 Code Table(5) 0x02 0xFF 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x03 0x73 Command Canceled Code Table(5) Function 0x00 Picture Reset 0x01 Audio Reset 0x03 Picture Reset2 0x04 All Reset 18 Range/Switch code Command Control Enquiry Standby Power On Yes No Disable Enable Contrast, Brightness, Chroma, Phase FWD-40LX1 FWD-32LX1R The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation. Le matériel contenu dans ce manuel consiste en informations qui sont la propriété de Sony Corporation. Sony Corporation interdit formellement la copie de quelque partie que ce soit de ce manuel ou son emploi pour tout autre but que des opérations ou entretiens de l’équipement à moins d’une permission écrite de Sony Corporation. Das in dieser Anleitung enthaltene Material besteht aus Informationen, die Eigentum der Sony Corporation sind. Die Sony Corporation untersagt ausdrücklich die Vervielfältigung jeglicher Teile dieser Anleitung oder den Gebrauch derselben für irgendeinen anderen Zweck als die Bedienung oder Wartung der in dieser Anleitung beschriebenen Ausrüstung ohne ausdrückliche schriftliche Erlaubnis der Sony Corporation. FWD-40LX1 FWD-32LX1R FWD-40LX1 (SY) FWD-32LX1R (SY) E 9-878-395-01 Sony Corporation Printed in Japan 2005. 9 22 ©2005
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2005:09:16 14:04:49 Producer : Acrobat Distiller 4.05 for Macintosh Modify Date : 2005:09:16 17:19:12+09:00 Title : FWD-40LX1/32LX1R Protocol Manual Author : SONY CORPORATION Page Count : 24 Page Mode : UseOutlines Page Layout : SinglePageEXIF Metadata provided by EXIF.tools