Sony Kv Tg21 Users Manual TG21L70
KV-TG21 to the manual 023c82cc-4757-2c54-cddc-d86c11c55e7d
2015-01-23
: Sony Sony-Kv-Tg21-Users-Manual-290258 sony-kv-tg21-users-manual-290258 sony pdf
Open the PDF directly: View PDF 
.
Page Count: 13
| Download | |
| Open PDF In Browser | View PDF |
4-084-259-12 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and
retain it for future reference.
KV-TG21
KV-PG14
© 2001 Sony Corporation
L70
A Getting Started
Step 1
Insert the batteries (supplied) into the remote.
b
Note
• Do not use old batteries nor use different types of batteries
together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tip
• You can also connect your TV to other optional components.
(See E)
Step 3
b
SELECT
PROGR
Plug in the power cord, then press ! on the TV to
turn it on.
Step 4
Press SELECT and PROGR + on the TV at the same time
for one to two seconds to preset the channels
automatically. (See J)
Tip
• To stop the automatic channel presetting, press SELECT.
SELECT
Step 5
Press SELECT on the remote until “LANGUAGE/
:
ENGLISH” appears on the screen, then press + or – to
change the on-screen display language.
B WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 110 – 240 V AC.
• Do not plug in the power cord until you have completed making all other connections;
otherwise a minimum leakage current might flow through the antenna and other terminals to
ground.
• To avoid battery leakage and damage to the remote, remove the batteries from the remote if
you are not going to use it for several days. If any liquid that leaks from the batteries touches
you, immediately wash it away with water.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
For children’s safety, do not leave children alone
with the TV. Do not allow children to climb onto
it.
To prevent fire or shock hazard, do not expose
the TV to rain or moisture.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Clean the TV with a dry and soft cloth. Do not use
benzine, thinner, or any other chemicals to clean
the TV. Do not scratch the picture tube.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are
present inside the TV. Refer servicing and
disposal of the TV to qualified personnel.
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may
be subject to excessive dust, heat, moisture or
vibrations.
WARNING (continued)
Do not place any objects on the TV.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
C Securing the TV
B KV-TG21 only
To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.
20 mm
screws
3.8 mm
clamps
band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
or
(1) Put a cord or chain through the
clamps.
(2) Screw one clamp to a wall or pillar
and the other clamp to the provided
hole at the rear of your TV.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
D TV front and rear panels
TV rear panel
0
qa
qs
TV front panel
!
SELECT
9
8
7 6
PROGR
5
Button
1 !
Function
Turn off or turn on the TV.
2
Remote control sensor.
3 1
3
4 PROGR +/–
5 2 +/– *
6 t
7 SELECT
8
9, qa t
0 8
qs T
Standby indicator.
4
3 21
Wake Up indicator.
Select program number.
Adjust volume.
Select TV or video input.
Select the desired item.
Earphone terminal.
Video input terminal.
Antenna input terminal.
Monitor output terminal.
* You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote.
E Connecting optional components
Connecting to the video input terminal ( t )
TV front panel
Audio/Video cable
(not supplied)
Camcorder
TV rear panel
Video game
equipment
Antenna cable
(not supplied)
Audio/Video cable
(not supplied)
VCR
Note
• Do not connect video equipment to t (video input) at the front and the rear of your TV at
the same time; otherwise the picture will not be displayed properly on the screen.
Connecting to the monitor output terminal (T)
TV rear panel
Audio/Video cable
(not supplied)
Audio system
VCR
F Troubleshooting
If you find any problem while viewing your TV, please check the following
guide. If any problem persists, contact your Sony dealer.
Symptom
Solutions
Snowy picture,
noisy sound
• Check the antenna cable and connection on the TV, VCR and on the wall.
• Preset the channel manually again. (See J)
• Check the antenna setup. Contact a Sony dealer for advice.
No picture, no sound
• Check the power cord, antenna and the VCR connections.
• Press ?/1 (power) or ! (main power) to turn on the TV.
Good picture, no sound
• Press 2 + to increase the volume level.
• Press % to cancel the muting.
Dotted lines or stripes
• Do not use a hair dryer or other equipment near the TV.
• Check the antenna setup. Contact a Sony dealer for advice.
Double images or
“ghosts”
• Use the fine tuning ("FINE") function. (See J)
• Turn off or disconnect the booster if it is in use.
• Check the antenna setup. Contact a Sony dealer for advice.
No color
• Select the appropriate color system. (See J)
• Adjust the color level. (See K)
• Check the antenna setup. Contact a Sony dealer for advice.
Abnormal color
patches
• Keep external speakers or other electrical equipment away from the TV.
Press ! (main power) to turn off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.
The 1 (standby)
indicator on your TV
flashes red several
times after every
three seconds.
• Count the number of times the 1 (standby) indicator flashes. Press !
(main power) to turn off your TV. Contact your nearest Sony service
center.
TV cabinet creaks.
• Changes in room temperature sometimes make the TV cabinet expand or
contract, making a noise. This does not indicate a malfunction.
A "boom" sound is
heard when the TV is
turned on.
• The TV's demagnetizing function is working. This does not indicate a
malfunction.
G Specifications
KV-TG21L70
Power requirements
KV-PG14L70
Note
110-240 V AC, 50/60 Hz
Power consumption (W) Indicated on the rear of the TV
Television system
B/G
Color system
PAL, PAL 60, SECAM, NTSC3.58 (AV IN), NTSC4.43
Channel coverage
VHF: E2 to E12
UHF: E21 to E69
CATV: S01 to S03, S1 to S41
8 (Antenna)
75-ohm external terminal
Audio output (Speaker)
Number of terminal
(Video)
3W + 3W
3W
Input: 2* Output: 1
Phono jacks; 1 Vp-p, 75 ohms
* One input line
available
(Audio)
Input: 2* Output: 1
Phono jacks; 500 mVrms
* One input line
available
(Earphone)
Output: 1
Monaural minijack
Picture tube
21 in.
14 in.
Tube size (cm)
54
37
Measured diagonally
Screen size (cm)
51
34
Measured diagonally
Dimensions (w/h/d, mm)
497 × 458 × 487
375 × 346 × 411
25
12
Mass (kg)
Design and specifications are subject to change without notice.
H Remote control
0
qa
1
qs
qd
2
qf
1
2
3
4
5
6
7
8
9
-
0
JUMP
SOUND
MODE
2
PROGR
qg
3
4
5
qh
qj
6
qk
7
8
FAVORITE
ql
9
TV
See
Button
1 ?/1
Function
Turn off temporarily or
turn on the TV.
2 a
3 JUMP
Display the TV program.
–
Jump to previous
program number.
–
4
5
6
7
9
0
PROGR +/–
Select program number.
–
2 +/–
Adjust volume.
–
SELECT
Select the desired item.
PIC MODE
Select picture mode.
+/–
Adjust items.
Display on-screen
information.
qa %
qd t
qf 0 – 9, ÷
–
–
K
–
–
Mute the sound.
–
Select TV or video input.
–
Input numbers.
–
Timer operations
qj
Set TV to turn on
automatically.
I
qk
Set TV to turn off
automatically.
I
qg SOUND MODE
qh A/B
Not function for your TV.
–
Not function for your TV.
–
Teletext operations (green label)
8 x (red, green,
yellow, blue)
0
qs
qd
qh
qj
qk
ql FAVORITE
Not function for your TV.
–
Not function for your TV.
–
I Setting the timers
You can turn on and off your TV by using the
and
buttons respectively.
Setting the Wake Up timer
\/1
1
2
3
4
5
6
7
8
9
-
0
JUMP
SOUND
MODE
2
PROGR
until the desired period of time appears
1 Press
on the screen.
WAKE UP TIMER:0H10M
(After 10 minutes)
WAKE UP TIMER:OFF
(No Wake Up timer)
WAKE UP TIMER:12H00M
(After 12 hours)
The Wake Up timer starts immediately after you
have set it.
FAVORITE
TV
the program number or video input you
2 Select
want to wake up to.
\/1, or set the Sleep timer if you want
3 Press
the TV to turn off automatically.
The indicator on the TV lights up orange when
the TV goes into standby mode.
Setting the Sleep timer
Press until the desired period of time appears
on the screen.
SLEEP TIMER:30M
(After 30 minutes)
SLEEP TIMER:60M
(After 60 minutes)
SLEEP TIMER:OFF
(No Sleep timer)
SLEEP TIMER:90M
(After 90 minutes)
The Sleep timer starts immediately after you have
set it.
Notes
• You can also cancel the Wake Up and Sleep timers by turning off the TV’s main power.
• If no buttons or controls are pressed for more than two hours after the TV is turned on using
the Wake Up timer, the TV automatically goes into standby mode.
J Presetting channels
You can automatically preset up to 100 TV channels in numerical sequence
from program number 1, or manually preset desired channels and channels
that cannot be preset automatically.
Presetting channels automatically
from a specified program number
Number
buttons
1
2
3
4
5
6
7
8
9
-
0
JUMP
SOUND
MODE
2
PROGR
SELECT until “AUTO PROGRAM” appears
1 Press
on the screen.
+ or – once to enter the “AUTO
2 Press
PROGRAM” mode.
The on-screen display will start flashing.
Press PROGR +/– or the number buttons until
3 the
desired program number appears on the
+ or –
screen.
FAVORITE
PIC MODE
SELECT
TV
Press + or – to start presetting channels
4 automatically.
PROGR +/–
Presetting channels manually
SELECT until “MANUAL PROGRAM”
1 Press
appears on the screen.
Press + or – once to enter the “MANUAL
2 PROGRAM”
mode.
Press PROGR +/– or the number buttons until
3 the
desired program number appears on the
screen.
Press + or – until the desired channel picture
4 appears
on the screen.
other channels manually, repeat steps
5 3Totopreset
4.
Presetting channels (continued)
To change the color system setting
If the color is abnormal when receiving programs through the 8 (antenna input)
terminal or the t (video input) terminal
(1) Press SELECT until “COLOR SYS” appears on the screen.
(2) Press + or – to select the appropriate color system until the color is optimal.
AUTO
PAL
SECAM
NTSC3.58
NTSC4.43
To skip program numbers
(1) Press PROGR +/– or the number buttons until the unused or unwanted program
number appears on the screen.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – once to enter the “MANUAL PROGRAM” mode.
(4) Press PIC MODE to skip the unused or unwanted program number.
(5) Press SELECT to exit the “MANUAL PROGRAM” mode.
Note
• To restore the skipped program number again, preset the channel automatically or manually.
To use the fine tuning function
The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – once to enter the “MANUAL PROGRAM” mode.
(4) Press
to display “FINE” on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to exit the “MANUAL PROGRAM” mode.
K Customizing the picture
You can customize the picture by selecting the picture mode or by adjusting its
settings.
Selecting the picture mode
Press PIC MODE to select the desired picture mode.
1
2
3
Select
To
4
5
6
“DYNAMIC”
view high contrast pictures.
7
8
9
“STANDARD”
view normal contrast pictures.
-
0
JUMP
SOUND
MODE
2
PROGR
“SOFT”
view mild pictures.
Adjusting the picture setting
SELECT
+ or –
1 Press SELECT until the desired setting appears.
FAVORITE
Each time you press SELECT, the setting item will
change as follows:
PIC MODE
TV
PICTURE
COLOR
SHARP
BRIGHT
HUE
2 Press + or – to adjust the item.
3 To adjust other items, repeat steps 1 to 2.
Notes
• “HUE” can be adjusted for the NTSC color system only.
• Reducing “SHARP” can also reduce picture noise.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2001:11:08 21:57:07 Producer : Acrobat Distiller 4.05 for Macintosh Author : Sony Corporation Creator : PageMaker 6.5 Title : KV-TG21L70 Modify Date : 2001:11:08 21:59:16+08:00 Page Count : 13EXIF Metadata provided by EXIF.tools