Sony Cd Radio Cassette Corder Cfd S05 Users Manual
CFD-S05 Operating Instructions CFDS05
User manual CFDS05 Sony CFD-S05 Boombox user guide User Manuals and Instruction Guides
2015-01-23
: Sony Sony-Sony-Cd-Radio-Cassette-Corder-Cfd-S05-Users-Manual-289198 sony-sony-cd-radio-cassette-corder-cfd-s05-users-manual-289198 sony pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
4-174-567-12(1) CAUTION CD Radio Cassette-Corder This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Owner’s Record The model number is located at the bottom and the serial number is located in the battery compartment. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. CFD-S05 Operating Instructions Printed in China WARNING Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The nameplate and important information concerning safety are located on the bottom exterior. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus. Note on DualDiscs To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. 1) 2) 3) 4) 5) 6) 7) 8) 9) NOTE Model No. CFD-S05 Serial No. ______________ ©2010 Sony Corporation Important Safety Instructions The use of optical instruments with this product will increase eye hazard. A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. 10) 11) 12) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 4-ohm loads, both channels driven from 150 Hz - 10,000 Hz; rated 1 W per channel-minimum RMS power, with no more than 10 % total harmonic distortion in AC operation. Other specifications CD player section System Compact disc digital audio system Laser diode properties Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Number of channels 2 Frequency response 20 Hz - 20,000 Hz +1/–2 dB Wow and flutter Below measurable limit CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Frequency range FM: 87.5 MHz - 108 MHz AM: 530 kHz - 1,710 kHz Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna Cassette-corder section Recording system 4-track 2 channel stereo Fast winding time Approx. 150 s (sec.) with Sony cassette C-60 Frequency response TYPE I (normal): 80 Hz - 10,000 Hz Speaker Full range: 8 cm (3 1/4 inches) dia., 4 , cone type (2) Outputs Headphones jack (stereo minijack): For 16 - 32 impedance headphones Input AUDIO IN jack (stereo minijack) Power output 1.7 W + 1.7 W (at 4 , 10% harmonic distortion) Power requirements For CD radio cassette-corder: 120 V AC, 60 Hz 9 V DC, 6 R14 (size C) batteries Power consumption AC 13 W Battery life For CD radio cassette-corder: FM recording Sony R14P: approx. 4.5 h Sony alkaline LR14: approx. 19 h This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Tape playback For customers in the USA Sony R14P: approx. 2.5 h Please register this product on line at http://www.sony.com/productregistration Proper registration will enable us to send you periodic mailings about new product, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you. Sony alkaline LR14: approx. 13 h CD playback Sony R14P: approx. 1 h Sony alkaline LR14: approx. 8 h Dimensions Approx. 365 mm × 134 mm × 230 mm (w/h/d) (14 3/8 inches × 5 3/8 inches × 9 1/8 inches) (incl. projecting parts) Mass Approx. 2.7 kg (5 lb. 15 oz) (incl. batteries) Supplied accessory AC power cord (1) Design and specifications are subject to change without notice. Power sources Optional accessory Sony MDR headphones series Discs that this unit CAN play Audio CD CD-R/CD-RW (CD-DA*) * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs. Discs that this unit CANNOT play CD-R/CD-RW other than those recorded in music CD format CD-R/CD-RW of poor recording quality, CD-R/CD-RW that has scratches or are dirty, or CD-R/CD-RW recorded with an incompatible recording device CD-R/CD-RW which is finalized incorrectly Notes on discs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking error. Radio section General 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Precautions Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. Do not stick paper or sticker on the CD, nor scratch the surface of the CD. After playing, store the CD in its case. On safety As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. Should any solid object or liquid fall into the unit, unplug the unit, and have it checked by qualified personnel before operating it any further. Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. On power sources For AC operation, use the supplied AC power cord; do not use any other type. Unplug the unit from the wall outlet when it is not be used for an extended period of time. When the batteries are not to be used, remove them to avoid damage that can be caused by battery leakage or corrosion. On placement Do not leave the unit in a location near heat sources, in a place subject to direct sunlight, excessive dust or mechanical shock or in a car subject to the direct rays of the sun. Do not place the unit on an inclined or unstable place. Do not place anything within 10 mm of the side of the cabinet. The ventilation holes must be unobstructed for the unit to operate properly and prolong the life of its components. Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring-wound watches away from the unit to prevent possible damage from the magnet. On operation If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player section. Should this occur, the unit will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate. If the unit has not been used for a long time, set it in the playback mode to warm it up for a few minutes before inserting a cassette. Notes on cassettes Break off the cassette tab from side A or B to prevent accidental recording. If you want to reuse the tape for recording, cover the broken tab with adhesive tape. Side A Tab for side B Tab for side A The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback. Cleaning the cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. 2 to a wall outlet 1 to AC IN Connect the AC power cord or insert six R14 (size C) batteries (not supplied) into the battery compartment . Notes Replace the batteries when the OPR/BATT indicator dims or when the unit stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the unit. To use the unit on batteries, disconnect the AC power cord from the unit. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. Basic Operations Other Operations Troubleshooting Playing a tape Using the display Playing preset radio stations 1 Press POWER . 2 Press TAPE . 3 Press , and insert the tape into the tape To check the total track number and playing time of the CD 1 Press POWER . 2 Press RADIO BAND to select the band. 3 Press PRESET + or – to tune in the stored station. compartment with the side you want to play facing upward. Use TYPE I (normal) tape only. To close the tape compartment, press CLOSE . Make sure there is no slack in the tape to avoid damaging the tape or the unit. Press once if the CD is stopped and twice if the CD is playing. After the total track number is displayed, the total playing time is displayed. To check the total track number again, press DISPLAY/ENTER . To check the current track number of the CD Press DISPLAY/ENTER while playing a CD. To check the current preset station number of the radio Press DISPLAY/ENTER when you are listening to a preset station. * VOLUME + , and have a tactile dot. 4 Press . To turn on/off the power Press POWER . The unit starts playing. Note Pause playback Press . To resume play, press it again. Press VOLUME +, – . Stop playback . To listen through headphones Fast-forward or rewind* or (fast forward or rewind) . Eject the cassette . When turning on the power, hold down POWER until OPR/BATT indicator lights up. To adjust the volume Connect the headphones to the (headphones) jack on the back of the unit. To reinforce the bass sound Press MEGA BASS . “MEGA BASS” appears in the display. To return to normal sound, press the button again. To * When the tape is wound to the end, press to release or . Recording on a tape Press MODE (press , then press MODE during playback) until “ 1”, “ ”, “SHUF”, “SHUF” and “ ”, “PGM”, or “PGM” and “ ” appear in the display. Then proceed as follows: To Select Repeat a single track Select “ 1” ” Repeat all tracks “ Shuffle play “SHUF” Press . Repeat tracks in random order “SHUF” and “ ” Press . Program play “PGM” Press or , then press DISPLAY/ENTER for the tracks you want to program in the order you want up to 20 tracks. Then press . 1 Press POWER . 2 Press to open the tape compartment and Playing a CD 1 Press POWER . 2 Press CD . 3 Press PUSH OPEN/CLOSE and place a disc with insert a blank tape with the side you want to record on facing upward. Use TYPE I (normal) tape only. To close the tape compartment, press CLOSE . 3 Select the program source you want to record. the label side up on the CD compartment. To close the CD compartment, press PUSH OPEN/ CLOSE . To record from the CD player, place a CD and press CD . To record from the radio, tune in the station you want. 4 Press to start recording Programed track Connecting optional components You can enjoy the sound from an optional component such as a portable digital music player through the speakers of this unit. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. Repeat programed tracks “PGM” and “ ” Pause recording Stop recording 4 Press . Tips The unit plays all the tracks once. Playing time To Pause playback Stop playback Go to the next track Go back to the previous track Locate a point while listening to the sound Locate a point while observing the display Remove the CD Press . To resume play, press it again. . . . Adjusting the volume or the audio emphasis will not affect the recording level. If the AM program makes a whistling sound after you have pressed in step 4, press MODE on the unit to select the position of ISS (Interference Suppress Switch) that most decreases the noise. For best results, use AC power as the power source for recording. To erase a recording, proceed as follows: 1 Press POWER . 2 Insert the tape whose recording you want to erase. 3 Press TAPE . 4 Press . (forward) or (backward) during playback and hold it until you find the point. (forward) or (backward) in pause and hold it until you find the point then press . PUSH OPEN/CLOSE . Playback starts from the track you last stopped playing (Resume play). During stop, the track number to be played is displayed. To cancel the resume play (to start play from the beginning of the first track), press while the CD is stopped. When you open the CD compartment or turn off the unit, the resume play is also canceled. Listening to the radio 1 Press POWER . 2 Press RADIO BAND repeatedly. Each time you press the button, the radio band toggles between AM and FM. 3 Hold down TUNE + or – until the frequency digits begin to change in the display. The unit automatically scans the radio frequencies and stops when it finds a clear station. If you cannot tune in a station, press TUNE + or – repeatedly to change the frequency step by step. When an FM stereo broadcast is received, “St” appears. Press or , then press DISPLAY/ENTER for the tracks you want to program in the order you want up to 20 tracks. Then Press . To cancel the selected play mode Press MODE (press , then press MODE during playback) repeatedly until the selected mode disappears from the display. To check the programed track and playing order in the display To check the order of tracks before playing, press DISPLAY/ENTER (press , then press DISPLAY/ ENTER during playback). Every time you press the button, the track number appears in the programed order. To change the current program Press once if the CD is stopped and twice if the CD is playing. The current program will be erased. Then create a new program following the programming procedure. Tips If you try to program 21 tracks or more, “FULL” will appear in the display. You can play the same program again, since the program is saved until you open the CD compartment. You can record your own program. After you have created the program, insert a blank tape and press to start recording. The resume function does not work during shuffle play or program play. If an FM broadcast is noisy, changing the current status to monaural usually reduces the noise. 1P ress MODE . “St” or “Mo” appears. 2 While “St” is displayed, press MODE to display “Mo.” Presetting radio stations You can store radio stations into the unit’s memory. You can preset up to 30 radio stations, 20 for FM and 10 for AM in any order. 1 Press POWER . 2 Press RADIO BAND to select the band. 3 Hold down AUTO PRESET for 2 seconds until “Auto” flashes in the display. 4 Press DISPLAY/ENTER . The stations are stored in memory from the lower frequencies to the higher ones. If a station cannot be preset automatically You need to preset a station with a weak signal manually. 1 2 3 4 Press POWER . Press RADIO BAND to select the band. Tune in a station you want using TUNE + or – . Hold down MEMORY for 2 seconds until the preset number flashes in the display. 5 Press PRESET + or – until the preset number you want for the station flashes in the display. 6 Press DISPLAY/ENTER . The new station replaces the old one. Tip connected component. The sound from the connected component is output from the speakers of this unit. To connect the unit to a TV or VCR, use an extension cable (not supplied) with a stereo-mini jack on one end and two phono plugs on the other end. You can record the sound of the connected component. Insert a blank tape and press . Tips Tip Press . To resume recording, press it again. . 2 Press POWER to turn the unit on. 3 Turn the connected component on. 4 Press AUDIO IN and start playback on the Tip Playing order ( is depressed automatically). To Then do this Press or to select the track that you want to repeat, then press . Press . The preset radio stations remain in memory even if you unplug the AC power cord or remove the batteries. Connect the AC power cord to the wall outlet securely. Make sure the batteries are inserted correctly. Replace all the batteries with new ones if they are weak. There is no audio. Unplug the headphones when listening through speakers. jack of the portable digital music player or other components using an audio connecting cable (not supplied). Selecting a CD play mode The power is not on. 1 Connect the AUDIO IN jack to the line output Before using the unit General Noise is heard. Someone is using a portable telephone or other equipment that emits radio waves near the unit. Move the portable telephone, etc., away from the unit. CD player The CD does not play or “Cd - -” is displayed even when a CD is in place. Place the CD with the label surface up. Clean the CD. Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. The CD-R/CD-RW is blank. There is a problem with the quality of the CD-R/CD‑RW, recording device or application software. Replace all the batteries with new ones if they are weak. The sound drops out. Reduce the volume. Clean the CD, or replace it if the CD is badly damaged. Place the unit in a location free from vibration. Clean the lens with a commercially available blower. The sound may drop out or noise may be heard when using a poor quality CD-R/CD-RW or if there is a problem with the recording device or application software. Radio Reception is poor. Reorient the antenna to improve FM reception. Reorient the unit itself to improve AM reception. The audio is weak or has poor quality. Replace all the batteries with new ones if they are weak. Move the unit away from the TV. The picture of your TV becomes unstable. If you are listening to an FM program near the TV with an indoor antenna, move the unit away from the TV. Tape player The tape does not move when you press an operation button. Close the cassette compartment securely. The button does not function or the tape does not play or record. Make sure the safety tab on the cassette is in place. Poor or distorted playback, recording or erasing quality. Clean the heads by using dry- or wet-type cleaning cassette (available separately) after every 10 hours of use, before you start an important recording, or after playing an old tape. Failure to clean the tape heads can cause degraded sound quality or an inability of the unit to record or play tapes. For details, refer to the instructions of the cleaning cassette. The TYPE II (high position) or TYPE IV (metal) tape is being used. Use TYPE I (normal) tape only. Demagnetize the heads using a commercially available tape head demagnetizer. Replace all the batteries with new ones if they are weak. After trying the remedies, if you still have problems, unplug the AC power cord or remove all the batteries. After all the indications in the display disappear, plug the AC power cord or insert the batteries again. If the problem persists, please consult your nearest Sony dealer.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract, Print high-res XMP Toolkit : 3.1-702 About : e95f9ec4-ac75-11dc-828e-bbaa75736987 Create Date : 2010:03:26 10:14:20+08:00 Metadata Date : 2010:03:26 10:15:39+08:00 Modify Date : 2010:03:26 10:15:39+08:00 Creator Tool : Adobe InDesign CS2 (4.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 14626 bytes, use -b option to extract) Instance ID : uuid:63015484-230b-4c95-8f82-17d71658716e Document ID : adobe:docid:indd:d6e296f9-5ddd-11dd-9840-d22de62c1439 Rendition Class : proof:pdf Derived From Instance ID : d6e296f8-5ddd-11dd-9840-d22de62c1439 Derived From Document ID : adobe:docid:indd:d6e296f7-5ddd-11dd-9840-d22de62c1439 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:cb3ab983-96f5-471e-a4f9-4a73d18527a7, uuid:881be228-8857-4a82-acf3-512a0579a500, uuid:13872516-9cf3-4f76-b7d4-dbe1461d9cc2, uuid:a2757584-e2e7-4468-a32f-8b9ecb5c99c9, uuid:c0d176c1-6188-4b42-862c-25e75272b798, uuid:107870f3-623e-464e-93aa-0c4bba7c81df, uuid:c79b4f6c-2d09-4024-b25e-8d5ef4f80f79, uuid:334fc473-1e84-481d-8aec-dd6a08c763eb Manifest Reference Document ID : uuid:92F88C4F0BBEDE11866EC0070866DF30, uuid:bb6dff9d-fda9-413a-98c9-6aa555447925, uuid:983bb280-ff3c-4b06-a393-755e2ccf224a, uuid:ba3aa3d8-b75b-4018-8518-e02ec5075339, uuid:97a4d5e0-4490-4db3-9df6-3ce37214987c, uuid:CC8820F9A1CDDE118A6DBE80CDD66AF8, uuid:87518BDD69A3DE11969FEE9BF0314744, uuid:116508BFCBA1DE119A68CBB83FDBE42B, uuid:01518042F9B2DE118FEC91B81D9E77A6, uuid:2d8b3bcb-e085-4049-9824-b3060939d354, uuid:2d8b3bcb-e085-4049-9824-b3060939d354, uuid:2d8b3bcb-e085-4049-9824-b3060939d354, uuid:2d8b3bcb-e085-4049-9824-b3060939d354, uuid:a715efad-0a00-4aec-982d-63d7c1a3819b, uuid:9a84abbb-db93-4ae3-ae84-59d04e5d92b2, uuid:a715efad-0a00-4aec-982d-63d7c1a3819b, uuid:DCED963DDAA1DE119A68CBB83FDBE42B, uuid:a715efad-0a00-4aec-982d-63d7c1a3819b, uuid:C7F45FA1AE05DF118CD8DF61302E8766, uuid:8ACAB6BB4AA3DE11969FEE9BF0314744 Format : application/pdf Title : CFD-S05 Creator : Sony Corporation Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 2 Author : Sony CorporationEXIF Metadata provided by EXIF.tools