Sony TM-0044 GSM/UMTS/LTE Tablet PC with WLAN, BT, ANT+, RFID User Manual Safety Leaflet

Sony Mobile Communications Inc GSM/UMTS/LTE Tablet PC with WLAN, BT, ANT+, RFID Safety Leaflet

Contents

Safety Leaflet

147★TABLET PC MODEL GSM/GPRS/EDGE 850/900/1800/1900&UMTS/HSPA Bands1/2/5&LTE Bands1/3/17/18/41&CDMA JP BC0/6■United StatesTHIS TABLET PC MODEL HAS BEEN CERTIFIED INCOMPLIANCE WITH THE GOVERNMENT'S REQUIREMENTSFOR EXPOSURE TO RADIO WAVES.The SOT21 Series tablets personal computers have been designed to comply with applicable safety requirements for exposure to radio waves. Your wireless tablet personal computer is a radio transmitter and receiver. It is designed to not exceed the limits* of exposure to radio frequency (RF) energy set by governmental authorities. These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by international scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a safety margin designed to assure the safety of all individuals, regardless of age and health.The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate (SAR).Tests for SAR are conducted using standardized methods with the tablet personal computer transmitting at its highest certified power level in all used frequency bands. While there may be differences between the SAR levels of various tablet personal computer models, they are all designed to meet the relevant guidelines for exposure to radio waves. For more information on SAR, please refer to the important information chapter in the User Guide.The highest SAR value as reported to the authorities for this tablet personal computer model when tested for use against the body is 1.03 W/kg*. The tablet personal computer has been tested when positioned of 0 mm from the body without any metal parts in the vicinity of the tablet personal computer or when properly used with an appropriate Sony. For devices which include "WiFi hotspot" functionality, SAR measurements for the device operating in WiFi hotspot mode were taken using a separation distance of 10 mm.** Before a tablet personal computer model is available for sale to the public in the US, it must be tested and certified by the Federal Communications Commission (FCC) that it does not exceed the limit established by the government-adopted requirement for safe exposure*. The tests are performed in positions and locations (i.e., by the ear and worn on the body) as required by the FCC for each model. The FCC has granted an Equipment Authorization for this tablet personal computer model with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. While there may be differences between the SAR levels of various tablet personal computer, all mobile tablet personal computers granted an FCC equipment authorization meet the government requirement for safe exposure. SAR information on this tablet personal computer model is on file at the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID PY7TM-0044. Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) website at http://www.phonefacts.net* In the United States and Canada, the SAR limit for mobile tablet personal computers used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a margin of safety to give additional protection for the public and to account for any variations in measurements.* In the United States and Canada, the SAR limit for mobile tablet personal computers used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a margin of safety to give additional protection for the public and to account for any variations in measurements.** This paragraph is only applicable to authorities and customers in the United States.This device complies with Part 15 of the FCC rules.  Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Any change or modification not expressly approved by Sony Mobile Communications AB may void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Caution:Your device can only connect to an FCC approved access point when using 5GHz WLAN for indoor and outdoor operation. This is because operation in the 5.15GHz to 5.25GHz frequency band is only permitted for indoor use.Radio Wave Exposure and Specific Absorption Rate (SAR) InformationFCC Statement for the USA
148We, Sony Mobile Communications AB ofNya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our productSony type TM-0044-BVand in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards standards EN 301 511:V9.0.2, EN 301 489-3:V1.4.1, EN 301 489-7:V1.3.1, EN 301 489-17:V2.2.1, EN 301 489-24:V1.5.1, EN 300 328:V1.7.1, EN 301 908-1:V5.2.1, EN 301 908-2:V5.2.1, EN 301 908-13:V5.2.1, EN 300 440-2:V1.4.1, EN 301 893:V1.7.1, EN 302 291-2:V1.1.1, EN 62 209-1:2006, EN 62 209-2:2010 and EN 60 950-1:2006+A11:2009+A1:2010+A12:2011 following the provisions of Radio Equipment and Telecommunication Terminal Equipment Directive 1999/5/EC.Lund, June 2014Pär ThuressonQuality Officer, SVP, Quality & Customer ServicesわれわれはR&TTE指令の要求事項を満たしています(1999/5/EC)We fulfill the requirements of the R&TTE Directive (1999/5/EC)Declaration of Conformity for SOT21Signature

Navigation menu