Sony TM0063 GSM/WCDMA/LTE + BLUETOOTH, DTS/UNII a/b/g/n/ac, ANT+ and NFC User Manual SAR leaflet

Sony Mobile Communications Inc GSM/WCDMA/LTE + BLUETOOTH, DTS/UNII a/b/g/n/ac, ANT+ and NFC SAR leaflet

Contents

SAR leaflet

付録/索引
United States
THIS TABLET PC MODEL HAS BEEN
CERTIFIED IN COMPLIANCE WITH THE
GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
The tablets PC have been designed to
comply with applicable safety
requirements for exposure to radio
waves. Your wireless tablet PC is a radio
transmitter and receiver. It is designed to
not exceed the limits* of exposure to
radio frequency (RF) energy set by
governmental authorities. These limits
establish permitted levels of RF energy
for the general population. The
guidelines are based on standards that
were developed by international
scientific organizations through periodic
and thorough evaluation of scientific
studies.
The standards include a safety margin
designed to assure the safety of all
individuals, regardless of age and health.
The radio wave exposure guidelines
employ a unit of measurement known as
the Specific Absorption Rate (SAR).Tests
for SAR are conducted using
standardized methods with the tablet
PC transmitting at its highest certified
power level in all used frequency bands.
While there may be differences between
the SAR levels of various tablet PC
models, they are all designed to meet
the relevant guidelines for exposure to
radio waves. For more information on
SAR, please refer to the important
information chapter in the User Guide.
The highest SAR value as reported to the
authorities for this tablet PC model
when tested for use against the body is
1.03 W/kg*. The tablet PC has been
tested when positioned of 0 mm from
the body without any metal parts in the
vicinity of the tablet PC or when
properly used with an appropriate Sony.
For devices which include "WiFi hotspot"
functionality, SAR measurements for the
device operating in WiFi hotspot mode
were taken using a separation distance
of 0 mm.
Radio Wave Exposure and
Specific Absorption Rate
(SAR) Information
** Before a tablet PC model is available
for sale to the public in the US, it must be
tested and certified by the Federal
Communications Commission (FCC) that
it does not exceed the limit established
by the government-adopted
requirement for safe exposure*. The
tests are performed in positions and
locations (i.e., by the ear and worn on
the body) as required by the FCC for
each model. The FCC has granted an
Equipment Authorization for this tablet
PC model with all reported SAR levels
evaluated as in compliance with the FCC
RF exposure guidelines. While there may
be differences between the SAR levels of
various tablet PCs, all mobile tablet PCs
granted an FCC equipment
authorization meet the government
requirement for safe exposure. SAR
information on this tablet PC model is on
file at the FCC and can be found under
the Display Grant section of http://
transition.fcc.gov/oet/ea/fccid/ after
searching on FCCID PY7-TM0063.
Additional information on SAR can be
found on the Mobile Manufacturers
Forum EMF website at
http://www.emfexplained.info/.
* In the United States, the SAR limit for mobile
tablet PCs used by the public is 1.6 watts/
kilogram (W/kg) averaged over one gram of
tissue. The standard incorporates a margin of
safety to give additional protection for the
public and to account for any variations in
measurements.
** This paragraph is only applicable to
authorities and customers in the United
States.
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions:
Any change or modification not
expressly approved by Sony Mobile
Communications AB may void the user's
authority to operate the equipment.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
FCC Statement for the USA
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
radiate radio frequency energy and if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
We, Sony Mobile Communications AB
of Nya Vattentornet SE-221 88 Lund,
Sweden declare under our sole
responsibility that our product
Sony type TM-0063-BV and in
combination with our accessories, to
which this declaration relates is in
conformity with the appropriate
standards EN 301 489-3:V1.6.1, EN 301
489-7:V1.3.1, EN 301 489-17:V2.2.1, EN
301 489-24:V1.5.1, EN 300 328:V1.8.1, EN
300 440-2:V1.4.1, EN 301 511:V9.0.2, EN
301 893:V1.7.1, EN 301 908-1:V6.2.1, EN
301 908-2:V6.2.1, EN 301 908-13:V6.2.1,
EN 302 291-2:V1.1.1, EN 62209-1:2006,
EN 62209-2:2010 and EN 60950-
1:2006+A11:2009+A1:2010+A12:2011+
A2:2013 following the provisions of,
Radio Equipment and
Telecommunication Terminal Equipment
directive 1999/5/EC
Lund, December 2014
Declaration of Conformity
for SO-05G
Pär Thuresson,
Quality Officer, SVP, Quality & Customer
Services
われわれはRTTE指令の要求事項を満たし
ています(1999/5/EC
We fulfill the requirements of the RTTE
Directive (1999/5/EC)

Navigation menu