Sony VGX XL2 User Manual Welcome Mat VGXXL2A WMat
User Manual: Sony VGX-XL2 Welcome Mat
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
31693_A 12/23/05 1:23 PM Page 1 Getting to Know Your VGX-XL2A Digital Living System VGX-XL2A Digital Living System ™ VGX-XL2A – Front Inputs & Outputs DVD+R Double Layer / DVD±RW Wireless Keyboard Power Cord HDMI™ Cable WLAN Antenna Optical HDMI™ to DVI-D Infrared Blaster Adapter S/PDIF Cable Remote Control Documentation Keyboard Remote (4) AA Batteries (2) AA Batteries Power Button Before installation: Please make sure you have all the items shown above. Wireless Keyboard SmartMedia™ (SM) xD-Picture Card™ Memory Stick Pro/Duo™ CompactFlash® & Microdrive™ USB 2.0 x2 Secure Digital (SD) & MultiMediaCard™ (MMC) Microphone i.LINK® (4 pin) Connect Keyboard/Pointing Device S-Video Headphone/ Line-out Volume Composite Audio/Video IN Remote Control Internet Standby Headphone Email MCE Volume Keyboard Status Standby Puts your computer into standby mode. My Media Links directly to your TV, Music, Pictures, & Videos. VGX-XL2A – Rear Inputs & Outputs Line IN (L/R) Audio/Video IN S-Video IN ATSC Digital TV Antenna (VHF/UHF) Antenna/ Cable Line OUT (L/R) Playback Play, Record, Stop, Pause, Rewind, Fast Forward, Replay, & Skip for TV, Music, Pictures & Video. Navigation Move through Menus Media Center Point Device/ Touch Pad Recorded TV Guide Live TV DVD Menu Left Button Right Button Channel # and Data Input Setting Up Keyboard Insert the Batteries TV Volume Control Setup ✔ On the back of the keyboard, remove the battery compartment cover. Preset the MCE remote control for TV volume ✔ Insert four (4) Alkaline AA batteries oriented as shown in the battery compartment. (Supplied) 1. Locate the input code number by selecting your specific manufacturer. ✔ Replace the battery compartment cover. Activate Wireless Keyboard Communication Before using the keyboard, you must activate communications between the DLS computer and the wireless keyboard with integrated pointing device. Please see Step 4 Activate Wireless Keyboard Communications on back. *267560801* Note: When using the VAIO® remote control, remember to point the remote at the VGX-XL2A personal computer, not at the TV or monitor. MCE (RC6) Default: 01 Sony: 02 Samsung: 03, 05, 06, 08, 11 or 13 Toshiba: 07 or 09 Panasonic: 04 or 10 Sharp: 07 or 12 HDMI™ USB 2.0 x2 Ethernet 10/100/1000baseT Optical S/PDIF IN i.LINK® x2 Wireless LAN Antenna Optical S/PDIF OUT & Coaxial S/PDIF OUT Component Video OUT Infrared Transmitter OUT x2 Power Cord 2. On the MCE remote control press and hold the OK button. 3. Type the input code number. 2-675-608-01 4. Release the OK button. You should now be able to control your TV volume using your MCE remote control. See back for setup instructions. 31693_A 12/23/05 1:23 PM Page 2 Getting to Know Your VGX-XL2A Digital Living System ™ Step 1: Step 2: Step 3: Step 4: Step 5: Step 6: Connecting your TV Connecting your Home Theater / Speakers Connecting to the Internet Turning Power On Software Setup Resolution Setup Make sure all hardware is connected and that power cables are plugged into properly grounded electrical outlets. (three prong outlets) ✔ Microsoft® Windows® To set the resolution for your TV or Monitor, do the following: 1. Using the pointing device on your wireless keyboard, right click anywhere on the Windows desktop. If your TV has a HDMI™ connector, use the supplied HDMI cable and connect one end to your TV and the other end to the HDMI connector on the back panel of the DLS computer. + If your sound system has two channels, use the LINE OUT (L) (R) on the back panel of the DLS computer and the LINE IN audio composite connectors on your speakers. If your TV has a DVI-D connector, use the supplied HDMI cable and the HDMI to DVI-D adapter. Insert the adapter in the HDMI connector on the back panel of the DLS computer. Then using the supplied HDMI cable, connect one end of the cable to the adapter and the other end to your TV. If your TV has component connectors (Y, Pb, Pr), use a RCA cable (not supplied) and connect one end to the corresponding component jacks on your TV and on the back panel of the DLS computer. Note: If your TV has a HDMI connector and a DVI-D connector, Sony recommends using the HDMI connector. Note: The HDMI cable carries both video and audio signals. Note: You cannot use HDMI and Component connections at the same time. Wired Network: Use an RJ-45 connector cable. Connect one end to the Ethernet connector on the DLS computer and the other end to your cable or DSL modem. Wireless Network: Connect WLAN antenna to the system. Launch Marvell Client Utility Application. Select "station" as the operation mode. Then proceed to Windows Wireless Zero Configuration service to set up your connection with your preferred Access Point. ✔ Turn on the power to the computer, TV, and speakers. ✔ Activate Wireless Keyboard Communication 1. Slide the Power button to ON. 2. From the back of the keyboard, slide the Pointing Device button to ON. 3. From the back of the keyboard, and the front panel of the DLS computer, press the Connect buttons simultaneously and hold a few seconds. 4. Test the keyboard to make sure it is functioning properly. If your sound system has more than two channels, use the supplied Optical S/PDIF cable and connect one end to the S/PDIF Optical OUT connector on the back panel of the DLS computer and connect the other end to the OPTICAL IN connector on your sound system. operating system Setup The first time you start your computer you will be presented with a series of screens for Windows® XP Setup. Please follow the on-screen instructions. ✔ Sony Registration Please complete all information to register your Sony product. This makes it easier to keep your products updated and obtain technical support, if necessary. 2. From the menu, point to or click NVIDIA® Display. A new menu option opens. The menu option name depends on what TV or monitor is connected to the computer. 3. Click the new menu command. The following screen appears. Note: Once you complete Windows Setup and Sony Registration, do the following: ✔ Check the picture quality of your TV or monitor. If it is not correct, go to Step 7 Resolution Setup. If Media Center automatically opens, and you need to adjust your picture quality, minimize Media Center and go to Step 6: Resolution Setup. When complete return to Media Center Setup. ✔ Make sure your Internet connection is working properly. Note: An optical/coaxial connection will provide a higher quality output than a composite connection. ✔ Media Center Setup The first time Media Center starts, you will be presented with a series of screens that will guide you through Media Center Setup. Please follow all on-screen instructions. Note: It is not necessary to use the optical or composite audio connections if you use the HDMI cable. Media Center Wireless Network Note: If you have an existing wireless network, and you wish to add the VGX-XL2A personal computer to the network, start Media Center and from Settings, go to General > Media Center Setup > Join Wireless Network. Then follow the on-screen instructions. Sample Set-Up Option 1 4. From the Directory list, click nView Display Settings, if necessary. 5. Click the Device Settings button. 6. From the side menu, click TV Format. Select the appropriate option for your TV from the list. 7. Click the Apply button. 8. Continue with Media Center Setup. HDMI 1 OR HDMI with DVI Adapter OR Component ® TV VGX-XL2A Provides you with a single location for all of your support needs and allows you to easily access valuable support and technical information from Sony® and Microsoft®. SPDIF OR VAIO Support Central Keep your VAIO® computer’s system software and operating system updated using VAIO Web Support and Microsoft Update. RCA Audio System Note: You must be connected to the Internet to access some of the VAIO Support Central features. Note: You can find more setup information in your computer's User Guide and in your TV or audio system documentation. To access VAIO Support Central, do the following: Sample Set-Up Option 2 1. Using your wireless keyboard w/ integrated pointing device, select Windows Start. 2. From the Start menu, select All Programs. 3. From the All Programs menu, select VAIO Support Central. VGX-XL2A Cable / Satellite STB Note: To access the most updated information available for VGX-XL2A Digital Living System, go to Support Control Central > Documentation and select the VGX-XL2A DLS User Guide. Cable Service (Wall outlet) TV ATSC 1 i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connector. All products with an i.LINK connector may not communicate with each other. ©2006 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony, Digital Living System, i.LINK, Memory Stick, Memory Stick PRO, VAIO, and like.no.other are trademarks of Sony. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks are trademarks of their respective owners. Printed in China.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2005:12:23 13:23:10Z Creator Tool : QuarkXPress(tm) 6.5 Modify Date : 2005:12:23 13:34:07-08:00 Metadata Date : 2005:12:23 13:34:07-08:00 Producer : QuarkXPress(tm) 6.5 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments Format : application/pdf Title : Layout 1 Document ID : uuid:ccddec95-73fa-11da-8c7e-001451083bda Instance ID : uuid:d9483763-73fb-11da-8bfc-001451083bda Page Count : 2 Creator : QuarkXPress(tm) 6.5EXIF Metadata provided by EXIF.tools