Sound Crush HP-03 Headphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3381851
Application ID	fpDhA55aGxkEdtlnElYFAA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.06kB (263264 bits)
Date Submitted	2017-05-08 00:00:00
Date Available	2017-05-09 00:00:00
Creation Date	2017-10-25 09:59:09
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-25 09:59:09
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Administrator

Features
Headphone
HP-03
This headphone can function as a speakerphone for your mobile
phone( while connected in Bluetooth mode)
Short press the play/pause icon of parent to pause/play or answer a
phone call.
Short press again to end call.
Microphone
Volume up/next
Aux in port
Play/pause/answer call
Volume down/back
USB charge
Charging
A full charge is recommended before the first use.
Connect the standard USB plug into a USB wall charger, or into a
powered USB outlet on a computer.
Connect the micro USB plugs into both speakers. The USB charging port
is located under the rubber cover on the side.
The LED indicators on the pause/play button will blow red while
May&June headphone is charging. When the light turns off. The units are
finished charging.
WARNING: Do not use USB chargers that provide more than 1 Amp(1A)
of electricity. Doing so could severely damage the battery of May&June
and potentially cause maltunctions.
Connecting
Pairing May&June headphone
 Connecting with device
1. Turn on your device’s Bluetooth function and search for Bluetooth
devices; select May and June from the device list, and press connect.
2. After successfully connecting, the LED of May&June headphone
changes to solid blue.
Safety and Maintenance
 Do not use this device near any heat sources such as radiators,
heaters, stoves, or other heat –producing machinery.
 Do not leave May&June headphone in direct sunlight.
 Keep May&June headphone out of children’s reach to avoid a
choking hazard
 Clean with a soft cloth. Do not use harsh chemicals to clean
 Do not clean this device when it is charging. Always unplug from the
power source and ensure the protective rubber cover is tightly sealed
before cleaning.
 Do not insert any metal object into the device. Risk of short
circuiting.
 Do not try to repair or open this device yourself. Contact
FRESHeTECH customer service.
 Do not submerge May&June headphone under water. Changes in
pressure can cause water to leak into the device and potentially
damage the speaker.
 Do not charge with a USB charger that provide more than 1 Amp(1A)
of electricity.
Trouble shooting
The headphone does not play.
1. Make sure the headphone is fully charged.
2. Make sure the headphone and device are connected. Please refer to
your device’s Bluetooth menu and Connecting
section of this
manual.
3. Make sure the volume is turned up.
I cannot pair my device to May&June headphone
1. Make sure the headphone is charged.
2. Make sure the Bluetooth of our device is on; please refer to your
device’s user manual.
3. Make sure the headphone and device are in pairing mode.
4. Make sure the headphone and your cell phone are within
controllable range. We recommend within 1 meter form each other.
If problem persists, please do as follows:
 Recharge the May&June headphone.
 Turn off your cell phone, take out the battery, and put it back
 Turn the Bluetooth of your device and delete all the pairing histories
 Re-pair your device and the headphone
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate
this equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:7c1f3cac-9bcb-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:08 07:27:45Z
Create Date                     : 2017:07:08 07:27:45Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:7c1f3cac-9bcb-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools