Soundcast SCR15M Wireless Surround System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1272465
Application ID	zpgCioOYeL9wjIbwGvhR6A==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	242.29kB (3028566 bits)
Date Submitted	2010-04-26 00:00:00
Date Available	2010-04-27 00:00:00
Creation Date	2010-04-26 15:52:50
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2010-04-26 15:53:15
Document Title	User manual
Document Creator	Adobe InDesign CS3 (5.0.4)

1 SCS100 SurroundCast Kit Contents
Quick Install Instruction
Specifications
1 SCT101 Transmitter
Transmitter
(Black front, grey enclosure)
Audio input (speakers)................... 10 VRMS MAX
Audio output (wireless).................. 48 kHz, 16-bit stereo
Transmission delay......................... 20 mS
1 SCR102 Receiver
Power supply................................. DC 6 V at 0.3 A
SCT 101 Transmitter
(Black front and enclosure)
Receiver
Audio input (wireless).................... 48 kHz, 16-bit stereo
Audio output (speakers)................. 50 W (RMS)
1 SY-0630 115VAC / 6VDC
Power Adapter for Transmitter
Speakers........................................ 4 to 8 ohm compatible
Signal-to-noise ratio . .................... 100 dB
1 GPE603- 100 – 240VAC / 24VDC
Power Adapter for Receiver, AC clip
Total harmonic distortion................ < 0.5%
Power supply................................. DC 24 V at 2.5 A
Power consumption....................... 60 W
CAUTION: Be certain that you are connecting the
SCT101 Transmitter to your Home Theater System. 		
Connecting the SCR102 Receiver to the Home Theater
System could result in damage to SurroundCast and/or
your Home Theater equipment.
2 Stands
• Read the instructions.
• Do not install this system in close proximity to water or fire.
• Do not expose these products to very hot environments or heat
sources.
• Use only the original parts and accessories provided by Soundcast
Systems.
• Avoid spilling liquids on any of the components of the system.
• Clean using only a dry cloth.
• This equipment is designed and intended for indoor use only.
• To avoid a tripping hazard, do not place wires in exposed walkways.
• Connect wires by inserting the stripped leads completely inside
the spring terminals. Make sure there is no excess stripped wire
outside of the spring terminal. Excess stripped wires left outside
of spring terminals may cause a short circuit and prevent the unit
from functioning properly.
• Connect the SCT101 Transmitter (black front and grey enclosure)
to the audio source with supplied input wires. Using speaker wire,
connect the SCR102 Receiver (black front and enclosure) to your
speakers.
CAUTION! Do not connect the SCR102 Receiver to the audio
source. This will damage the Receiver and/or the audio source.
This product uses a radio technology that is not
+ NOTE:
compatible with other Soundcast Products. It is designed for
5 Setup
Please observe these guidelines to ensure the reliability
and quality of the wireless connection.
1. For best results install both Transmitter and Receiver in a
vertical orientation.
SCT 101 Transmitter
Black/Gray
Transmitter and Receiver Units –
Left
Center
Right
3. If the SurroundCast Receiver is mounted in the 		
mounting stand (included), optimum performance
will occur if it is placed with an orientation facing the SurroundCast Transmitter.
Home Theater Application
2. If the SurroundCast Receiver is wall mounted, optimum
performance will occur if it is placed so that the orientation
is facing the SurroundCast Transmitter.
Poster.indd 1
(black / black - white pair)
4 Placement
• Compact design
• Works in the 2.4GHz frequency band
• Co-exists with other 2.4GHz devices
• Interference free audio operation
• Designed for in-room transmission range
• Very high quality audio
Black/Black
2 Transmitter Input Wires
Before you start...
the express purpose of in-room surround sound applications.
3 Features
SCR 102 Receiver
CAUTION
SCR 102 Receiver
CAUTION
1 Power Cord for GPE603
Power Adapter
2 Safety information
Positive (+) volume calibration control
Negative (-) volume calibration control
Status indicator
DC jack
Left speaker input terminals
Right speaker input terminals
Re-mating switch access
Wall mounting holes
4. It is also recommended to place both SurroundCast units
at least 18 inches away from metallic walls or large metallic
blocking objects to ensure a strong wireless link.
5. Prevent heavy objects from falling on the system and and/or
exposed electrical wiring near SurroundCast components to
avoid the risk of an electric shock.
Subwoofer
Amplifier
Left
Surround
Right
Surround
6. Place SurroundCast components away from other sources
of wireless signals such as routers, music networks or any
other electronic piece of equipment that uses radio communications including other Soundcast products. A distance of
3 ft. or more between SurroundCast and your other wireless
devices is preferable for optimum performance.
2/26/10 11:09:27 AM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 1
PDF Version                     : 1.6
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:adee2abf-00df-4c27-8753-cb7bc180c187
Modify Date                     : 2010:04:26 15:53:15-04:00
Create Date                     : 2010:04:26 15:52:50-04:00
Metadata Date                   : 2010:04:26 15:53:15-04:00
Document ID                     : uuid:7469a0d3-e2c8-4aa1-9a04-a9246a60f4f9
Format                          : application/pdf
Creator                         : Adobe InDesign CS3 (5.0.4)
Producer                        : Adobe PDF Library 8.0

EXIF Metadata provided by EXIF.tools