Soundcast VGBT07A Bluetooth and NFC Speaker User Manual

Soundcast LLC Bluetooth and NFC Speaker

User Manual

NFC Link: location for pairing of smartphones with NFC.Enlace NFC: ubicación para sintonizar smartphones con NFC.Liaison NFC: emplacement de raccordement de smartphones équipés de NFCIndoor/Outdoor EQ LEDLuces LED para interiores/exterioresVoyant d’intérieur/extérieur Control KeypadTeclado de controlPavé de commande USB Mobile Charging OutputSalida USB para la carga de celulares Sortie de charge USB pour portables Aux Input Jack: 3.5mm jackClavija de entrada auxiliar: clavija de 3.5 mm Entrée auxiliaire : prise jack de 3,5 mm Power Input JackClavija de entrada de alimentaciónPrise jack d’entrée d’alimentationVG7 Connections and ControlsConexiones y controles del VG7 Connexions et commandes du VG7 Connecting and PairingConexión y sintonizaciónConnexion et appariement Bluetooth Pairing with NFCSintonización de Bluetooth con NFCAppariement Bluetooth avec NFC1. Enable Bluetooth and NFC functions on your phone then press Bluetooth button on VG7Habilite las funciones de Bluetooth y NFC en su teléfono, luego presione el botón Bluetooth en el VG7 Activez les fonctions Bluetooth et NFC sur votre téléphone, puis appuyez sur le bouton Bluetooth du VG72. Hold phone over the NFC logo on VG7 until phone connectsSostenga su teléfono sobre el logo de NFC en el VG7 hasta que el teléfono se conecte Placez votre téléphone sur le logo NFC du VG7 jusqu’à ce que le téléphone se connecte 3. Press OK on your phone to connectPresione OK en su teléfono para conectarseAppuyez sur OK sur votre téléphone pour vous connecter 4. Play audioReproduzca el audioLecture audioStandard Bluetooth PairingSintonización estándar con Bluetooth Appariement Bluetooth standard 1. Enable Bluetooth on your smartphoneHabilite Bluetooth en su smartphoneActivez la fonction Bluetooth sur votre téléphone 2. Pair a new device: press and hold the VG7 Bluetooth button for 3 seconds (Bluetooth LED will blink slowly)Sintonice un nuevo dispositivo: presione y sostenga el botón Bluetooth del VG7 por 3 segundos (la luz LED de Bluetooth titilará lentamente) AUXPour apparier un nouvel appareil : appuyez sur le bouton Bluetooth du VG7 et maintenez-le enfoncé pendant 3 secondes (le voyant Bluetooth se met à clignoter lentement) 3. From Bluetooth menu on phone, select “VG7 by Soundcast”Desde el menú de Bluetooth en su teléfono, seleccione “VG7 by Soundcast” Sur le menu Bluetooth de votre téléphone, sélectionnez « VG7 by Soundcast »4. Once paired, the Bluetooth LED becomes solid.Una vez sincronizado, la luz LED de Bluetooth se vuelve sólida.Une fois les deux appareils appariés, le voyant Bluetooth demeure allumé en continu. Press Bluetooth button to reconnect to previously paired devices.Presione el botón Bluetooth para reconectarse a otros dispositivos previamente sincronizados.Appuyez sur le bouton Bluetooth pour vous reconnecter à des appareils déjà appariés. To clear all devices from memory, press and hold the Bluetooth key for 10 seconds. The Bluetooth LED will double blink when memory is clear.To clear all devices from memory, press and hold the Bluetooth key for 10 seconds. The Bluetooth LED will double blink when memory is clear.To clear all devices from memory, press and hold the Bluetooth key for 10 seconds. The Bluetooth LED will double blink when memory is clear.Aux Input ModeModo de entrada auxiliar Mode d’entrée auxiliaire Plug external source into 3.5mm jack to automatically switch to Aux Input mode, LED turns YELLOW. Remove plug to switch back to Bluetooth.Enchufe la fuente externa en la clavija de 3.5 mm para conmutar automáticamente al modo de entrada auxiliar, la luz LED se volverá AMARILLA. Retire el enchufe para regresar a los modos Bluetooth.Raccordez la source externe dans la prise jack de 3,5 mm pour passer automatiquement en mode d’entrée auxiliaire. Le voyant jaune s’allume. Retirez la che jack pour revenir au mode Bluetooth.TrueWireless™ Stereo (TWS) PairingTrueWireless™ Stereo (TWS) PairingTrueWireless™ Stereo (TWS) PairingWith TWS, two VG7 units may be paired for synchronous Bluetooth play. On/off, volume, track controls and TWS Mode will be synced and may be controlled from either unit.With TWS, two VG7 units may be paired for synchronous Bluetooth play. On/off, volume, track controls and TWS Mode will be synced and may be controlled from either unit.With TWS, two VG7 units may be paired for synchronous Bluetooth play. On/off, volume, track controls and TWS Mode will be synced and may be controlled from either unit.1. Both Speakers must be in Bluetooth Mode (no Aux input connected).Both Speakers must be in Bluetooth Mode (no Aux input connected).Both Speakers must be in Bluetooth Mod (no Aux input connected).2. Press and hold the TWS button on the rst VG7 unit until TWS LED fast blinks blue. Repeat with the second VG7 unit.Press and hold the TWS button on the rst VG7 unit until TWS LED fast blinks blue. Repeat with the second VG7 unit.Press and hold the TWS button on the rst VG7 unit until TWS LED fast blinks blue. Repeat with the second VG7 unit.4. When paired, the TWS LED on both units will show both blue and orange.When paired, the TWS LED on both units will show both blue and orangeWhen paired, the TWS LED on both units will show both blue and orange. 5. Reconnecting: The TWS-paired units will re-connect automatically, shortly after power-up. A short press of the TWS button on either unit allows cycling through the TWS modes (stereo, left/right, off) listed below: Reconnecting: The TWS-paired units will re-connect automatically, shortly after power-up. A short press of the TWS button on either unit allows cycling through the TWS modes (stereo, left/right, off) listed below:Reconnecting: The TWS-paired units will re-connect automatically, shortly after power-up. A short press of the TWS button on either unit allows cycling through the TWS modes (stereo, left/right, off) listed below: LED blue and orange: left/right from each speaker LED orange only: left from primary speaker, right from secondary speaker LED off: TWS offLED blue and orange: left/right from each speaker LED orange only: left from primary speaker, right from secondary speakerLED off: TWS offLED blue and orange: left/right from each speaker LED orange only: left from primary speaker, right from secondary speakerLED off: TWS off No music or intermittent dropouts? VG7 Primary and Secondary units may be too far away from each other. No music or intermittent dropouts? VG7 Primary and Secondary units may be too far away from each other.No music or intermittent dropouts? VG7 Primary and Secondary units may be too far away from each other.Keypad Lockout ModeKeypad Lockout ModeKeypad Lockout ModeThis Mode locks all VG7 keys except the Power On/Off. If any locked key is pressed, all LEDs will rapidly ash to signify lockout mode. To toggle the keypad lockout on or off, Power up the VG7 while simultaneously holding down the Indoor/Outdoor and Mute Buttons.This Mode locks all VG7 keys except the Power On/Off. If any locked key is pressed, all LEDs will rapidly ash to signify lockout mode. To toggle the keypad lockout on or off, Power up the VG7 while simultaneously holding down the Indoor/Outdoor and Mute Buttons.This Mode locks all VG7 keys except the Power On/Off. If any locked key is pressed, all LEDs will rapidly ash to signify lockout mode. To toggle the keypad lockout on or off, Power up the VG7 while simultaneously holding down the Indoor/Outdoor and Mute Buttons.AUXTrack Control Buttons: Control compatible Bluetooth sourcesBotones de control de pista: Control compatible con fuentes conectadas a BluetoothBoutons de contrôle des pistes : Contrôle des sources Bluetooth compatiblesPower On/Off ButtonBotón de encendido/apagado Bouton marche/arrêt Aux Input LED: Lights YELLOW when Aux Input is connected. Luces LED de entrada auxiliar: Se encienden de color AMARILLO cuando se conecta una entrada auxiliar. Voyant entrée auxiliaire : S’allume en jaune lorsque l’entrée auxiliaire est connectée. TrueWireless™ Stereo (TWS) Button and LED Botón TrueWireless Stereo (TWS) y luz LED Bouton TrueWireless Stereo (TWS) et LED Bluetooth Button and LEDBotón Bluetooth y luz LEDBouton et voyant Bluetooth Mute Button and LEDBotón silenciador y luz LEDBouton de sourdine et LEDIndoor/Outdoor EQ Button: Switches between indoor and outdoor modes.• Outdoor Mode=EQ bass+, LED ON • Indoor Mode=EQ bass–, LED OFF Botón para interiores/exteriores: Permite conmutar entre los modos para interiores y para exteriores. • Modo para exteriores=EQ bass+, LED encendido • Modo para interiores=EQ bass–, LED apagado Bouton d’intérieur/extérieur : Bascule entre les modes en intérieur et en extérieur. • Mode en extérieur = EQ bass+, DEL allumée • Mode en intérieur = EQ bass–, DEL éteinte Battery Indicator LED:• Solid RED=charging • Off=charged • Blinking RED=low batteryLuz LED indicadora de la batería:• ROJO sólido=se está cargando • Apagado= cargado • ROJO titilante=batería baja Voyant de la batterie : • Rouge xe = en cours de charge • Éteint = chargée • Rouge clignotant = batterie faibleVolume Buttons: Up and down volume controls. NOTE: set phone volume to 80%-90% for best performance.Botones de volumen: controles de aumento y disminución de volumen. NOTA: congure el volumen del teléfono a 80%-90% para obtener el mejor rendimiento.Boutons de volume : Commandes d’augmentation et de diminution du volume. REMARQUE : réglez le volume entre 80 et 90 % pour une performance optimale.✼✼✼VG7 Quick Start Guide EN-SP-FR 121516-ER.indd 2 12/15/16 7:57 PMOnly supports charging
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 28

Navigation menu