Sounding Audio MS2ABK MARINE AUDIO SYSTEM User Manual MS2A
Sounding Audio Industrial Ltd. MARINE AUDIO SYSTEM MS2A
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3265069 |
| Application ID | zIIzD3cEUFCa+KIDBctKyg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.05kB (813121 bits) |
| Date Submitted | 2017-01-19 00:00:00 |
| Date Available | 2017-01-20 00:00:00 |
| Creation Date | 2015-06-16 10:13:43 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2015-06-16 10:13:43 |
| Document Title | MS2A User Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Kelly Li |
MS2A MARINE AUDIO SYSTEM Installation and Operation Manual MS2A CONTENTS Important Safety Instructions ................................................................................. 1 Introduction ............................................................................................................ 2 Installation .............................................................................................................. 4 Wiring..................................................................................................................... 5 Basic Operation ..................................................................................................... 6 Tuner Operation ..................................................................................................... 8 MP3/USB Operation .............................................................................................. 9 ® iPod Operation ................................................................................................... 10 Bluetooth Operation ............................................................................................. 12 App Operation ...................................................................................................... 13 Care and Maintenance......................................................................................... 14 Troubleshooting ................................................................................................... 14 Specifications ....................................................................................................... 15 Copyrights and Trademarks iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. ii MS2A WARNINGS AND COMPLIANCE WARNING! To reduce the risk of fire of electric shock, do not expose this apparatus to rain or moisture. Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Portable Cart Warning WARNING! The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. NOTE: Keep the volume low enough to be aware of your surroundings. NOTE: USE THE PROPER POWER SUPPLY! This product is designed to operate with a12 volt DC negative ground battery system. FCC Notes WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power -supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. MS2A INTRODUCTION System Features HARDWARE KIT CONTENTS Features of the Jensen MS2A marine audio system include: • White LED Backlit LCD • iPX5 Waterproof (after installation) • Low Battery Alarm • AM/FM US/EURO Tuner with 30 Presets (12 AM, 18 FM) • Bluetooth (Supports A2DP and AVRCP) • USB Playback of MP3/WMA files with iPod/iPhone Interface • Mute • Pre-set Equalizer - 5 settings (USER > FLAT > POP > CLASSIC > ROCK) • Electronic Bass, Treble, Balance and Fader Controls • Output Power 40W x 4 • Wired Remote Control Ready (MWR150 and MWR75 sold separately) • 2-Channel Pre-amp Line Level Outputs • Auxiliary Audio Input (Rear RCA) M5 NUT X1PCS PANEL COVER X2PCS WIRE HARNESS X1PCS Content List • • • • Jensen MS2A Radio Wire Harness Hardware Kit Owner’s Manual MOUNTING BRACKET X1PCS MS2A SAFETY INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. When Boating Keep the volume level low enough to be aware of your surroundings. Protect from Water Do not submerge the product in water, as this can cause electric shorts, fire or other damage. Protect from the Elements Use the included cover to protect the wired commander from sunlight, dust, and water while not in use. Protect from High Temperatures Do not mount radio within close proximity of engine compartment. Use the Proper Power Supply This product is designed to operate with a 12 volt DC negative ground battery system. CAUTION: DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN. MS2A INSTALLATION 2. Before You Begin Before you begin, always disconnect the negative battery terminal. 3. Important Notes • • • • • Before final installation, test the wiring connections to make sure the unit is connected properly and the system works. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications to your vessel. Install the unit where it does not interfere with operating the vessel and cannot injure passengers if there is a sudden or emergency stop. Avoid installing the unit where it will be subject to high temperatures from direct sunlight, hot air, or from a heater, or where it would be subject to excessive dust, dirt or vibration. 4. 5. 6. 7. 8. Front Mount 1. 9. Check the dashboard opening size by sliding the radio into it. If the opening is not large enough, carefully cut or file as necessary until the radio slides into the opening. Check that there will be sufficient space behind the dashboard for the radio chassis. Place the radio in front of the dashboard opening so the wiring can be brought through the opening. Follow the wiring diagram carefully and make certain all connections are secure to ensure proper operation. After completing the wiring connections, turn the unit on to confirm operation (vessel accessory switch must be on). If the unit does not operate, recheck all wiring until the problem is corrected. Once proper operation is achieved, turn the accessory switch off and proceed with final mounting of the chassis. Carefully slide the radio into the opening, making sure it is right-side-up. Secure the radio to the dashboard using the M5 x 25mm screws provided. Replace the covers on either side of the radio. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut and spring washer provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and plain washer provided. Bend the strap, as necessary, to position it. Test radio operation by referring to the operating instructions for the unit. Removing the Unit To remove the radio after installation, remove the covers, unscrew the installation screws and pull the radio out. Removing Battery When wiring is complete, reconnect the battery negative terminal. CAUTION: The rear of the radio must be supported with the strap to prevent damage to the radio and supporting structures. MS2A WIRING POWER SOCKET SHOWN FROM PIN VIEW PIN DESCRIPTION WIRE COLOR A1 RIGHT REAR SPEAKERS (+) PURPLE A2 RIGHT FRONT SPEAKERS (+) GRAY A3 LEFT FRONT SPEAKERS (+) WHITE A4 LEFT REAR SPEAKERS (+) GREEN A5 LEFT REAR SPEAKERS (-) GREEN/BLACK A6 LEFT FRONT SPEAKERS (-) WHITE/BLACK A7 RIGHT FRONT SPEAKERS (-) GRAY/BLACK A8 RIGHT REAR SPEAKERS (-) PURPLE/BLACK B1 NO CONNECTION EMPTY B2 NO CONNECTION EMPTY B3 AMP REMOTE (+12VDC 100mA) BLUE B4 NO CONNECTION EMPTY B5 GROUND BLACK B6 NO CONNECTION EMPTY B7 +12VDC SWITCHED RED B8 NO CONNECTION EMPTY MS2A BASIC OPERATION Audio Menu Press the AUDIO/MENU button (3) on the control panel to access the audio menu. You can navigate through the audio menu items by pressing the AUDIO/MENU button repeatedly. Once the desired menu item appears on the display, adjust that option by pressing the VOL+ UP or DOWN VOL- buttons (2) within 5 seconds. The unit will automatically exit the audio menu after five seconds of inactivity. The following menu items can be adjusted. Bass Level Use the VOL buttons to adjust the Bass level range from “-6” to “+6”. Treble Level Use the VOL buttons to adjust the Treble level range from “-6” to “+6”. Balance Use the VOL buttons to adjust the Balance between the left and right speakers from “L12” (full left) to “R12” (full right). Fader Use the VOL buttons to adjust the Fader between the rear and front speakers from “R12” (full rear) to “F12” (full front). Power On/Off Press any button on the front panel to turn the unit on. Press the power button (1) to turn the unit on/off. Volume Control System Menu To increase the volume, press the VOL+ UP button (2a). To decrease the volume, press the DOWN VOL- button (2b). 1. Mute Press the MUTE button (17) on the control panel to mute the audio output. Press MUTE again to restore the audio output to the previous level. 2. Mode Press and hold the AUDIO/MENU button (3) for more than 3 seconds to enter the system menu. “MENU” will appear on the display, followed by the first menu item, “CONTRAST.” Press the ►►| SEEK/TUNE/TRK or |◄◄ SEEK/TUNE/TRK button (14, 13) or press the AUDIO/MENU button repeatedly to navigate the system menu and select the desired item. Press the VOL+ UP or DOWN VOL- buttons (2) to adjust the selected menu item. Press the AS/PS button (15) to return to the previous operation. Press the MODE button (4) on the control panel to select a different mode of operation, as indicated on the display panel. Available modes include Tuner, iPod, USB, AUX In (optional Auxiliary Input) and BT Audio. 3. Reset The following items can be adjusted: • CONTRAST (00 – 10): Set LCD contrast. • LOW BATT (ON/OFF): Monitor voltage on ACC line. • DISTANT/LOC: “Local” mode favors access to local stations whose signals are much stronger, thereby improving reception. Select “Distant” to terminate local receive mode and resume normal mode. • AREA (USA/Latin/Europe): Set frequency spacing for various regions. • VOL PGM (00 – 46): Select an automatic turn-on volume. • BEEP TONE (ON/OFF): Turn the audible beep ON/OFF (heard when functions/buttons are selected). NOTE: Beep tone off will not affect LOW 4. The reset button should be activated for the following reasons: • initial installation of the unit when all wiring is completed • function buttons do not operate • error symbol on the display Use a ball point pen or similar object to press the RESET button (19). This may be necessary should the unit display an error code. You can recover factory default settings using the RESET function located on the system menu. With “RESET” flashing, press the ENTER button (18) to activate. MS2A • • • • • • BATT audible tone. LCD BRIT (01 – 10): Adjust LCD brightness. BT ON/OFF: Choose “BT ON” or “BT OFF”. BT PAIR (ON/OFF): Choose “YES” to automatically pair a previously paired device. BT DEVICE (Lock/Unlock, Disconnect/Connect, Delete): View, lock and delete from a list of previously paired mobile phone device models. RESET: Return the EEPROM to factory default set up values. "RESET" will blink on the LCD to confirm. Press the ENTER button (18) to select. 2. 3. Press the MODE button (4) twice to view the AUX option. Press MODE again to cancel Aux In mode and switch to the next mode. Liquid Crystal Display (LCD) The current frequency and activated functions are shown on the LCD panel (20). NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range. NOTE: BT Pair and BT Device menu options are only available while in the BT mode. Quick Exit Hot Key In the following modes and conditions, press the AS/PS button (15) < 3 seconds to quickly exit the current operation without waiting for the system default time out: • System menu operation • Searching mode • Audio menu operation LOW BATTERY Operation If LOW BATT is set to “ON”, an alarm will sound (8 beeps every 30 sec) when the voltage drops to 10.8V (+/- 0.3V). A visual warning (LOBA) will appear flashing (8 flashes every 30 sec) in the lower left corner of the LCD display. NOTE: “OFF” is the default setting for LOW BATT. If the audio is muted or the volume is set to 0, the audible beep will not be heard. Equalizer Press the EQ/LOUD button (11) to turn on the equalization function and select between five pre-defined bass and treble curves: USER > FLAT > POP > CLAS > ROCK. Loudness Press and hold the EQ/LOUD button (11) to toggle true loudness on/off. When listening to music at low volumes, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Auxiliary Input To access an auxiliary device: 1. Connect the portable audio player to the AUX IN cables routed from the rear of the radio. MS2A TUNER OPERATION Automatically Store / Preset Scan (AS/PS Automatically Store Select a band (if needed). Press and hold the AS/PS button (15) for more than three seconds to automatically select six strong stations and store them in the current band. The new stations replace any stations already stored in that band. NOTE: During Auto Store (AS), the tuner will default to “Local” mode while scanning the band initially. After scanning the entire band once, the unit will switch to “Distant” mode for all subsequent Auto Store tuning. Preset Scan Select a band (if needed). Press the AS/PS button (15) to scan stations stored in the current band. The unit will pause for ten seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached. Select a Band Press the BAND/SEARCH button (16) to change between three FM bands and two AM (MW) bands. Manual Tuning Press the ►►or◄◄ buttons (14, 13) to seek stations up/down step by step. Auto Seek Tuning Press and hold the ►►| SEEK/TUNE/TRK or |◄◄ SEEK/TUNE/TRK buttons (14, 13) to automatically seek the next or previous strong station. Preset Stations Six numbered preset buttons store and recall stations for each band. Store a Station Select a band (if needed), then select a station. Press and hold a preset button (5-10) for two seconds. The preset number will appear in the display. Recall a Station Select a band (if needed). Press a preset button (5-10) to select the corresponding stored station. MS2A MP3/USB OPERATION Controlling Playback Pause/Play Press the 1/|| button (5) to suspend playback. Press the 1/|| button again to resume playback. Track Select Press the ►►| SEEK/TUNE/TRK or |◄◄ SEEK/TUNE/TRK buttons (14, 13) button for less than one second to advance to the next file, or press and hold to fast forward or fast reverse. Playback begins when the button is released. Repeat (RPT) Press the 2/RPT button (6) to repeatedly play the current file. Press 2/RPT again to repeat all songs in the current folder. Press 2/RPT a third time to resume normal playback. Intro Scan (INT) Press the 3/INT button (7) once to play the first 10 seconds of each file in the current folder. Press 3/INT again to play the first 10 seconds of each file on the current device. When the desired file is reached, press 3/INT a third time to end the scan and play the selected file. MP3 Specifications • • • • • • • • • • A directory that does not include an MP3 file is skipped. Maximum number of folders: 512 (including skipped directories) Maximum number of folder levels: 12 Maximum number of MP3 files: 999 Maximum number of characters for MP3 file name and folder name: 32 Sampling frequency: 16KHz, 22.05KHz, 24KHz, 32KHz, 44.1KHz, 48KHz. Bit rates: maximum 384 Kbps. Maximum number of Characters of ID3 Tag: ID3 Tag version 1.0: 32 ID3 Tag version 2.x: 32 Random (RDM) Press the 4/RDM button (8) to randomly play all files in the current folder. Press 4/RDM again to randomly play all files on the device. Press 4/RDM a third time to resume normal playback. Navigating Folders Press the 5 button (9) to move to the previous folder and begin playback of the first song in the folder. Press the 6 button (10) to advance to the next folder and begin playback of the first song in the folder. NOTE: USB flash drives with a capacity of up to 64 GB are supported. Inserting and Removing a USB Device Alternate Display Information Press the DISP button (12) to change the display information in the following order: ALBUM >SONG TITLE > ARTIST > FILE X of Y > ALBUM. Inserting a USB Device Insert the USB device into the USB connector routed from the rear of the radio and display will show the “Loading…” message. The unit will read the files on the USB device automatically. MP3/WMA Directory Search 1. Press the BAND/SEARCH button (16) to enter directory search mode. 2. Press the ENTER button (18) to confirm search mode. The LCD will display the folder list. 3. Navigate the folder list by pressing the VOL+ UP or DOWN VOL- buttons (2). 4. Press the ENTER button to select a folder. The LCD will display the list of files within that folder. 5. Navigate the file list by pressing the VOL+ UP or DOWN VOL- buttons. 6. Press the ENTER button to select a file. Removing a USB Device Press the MODE button (4) to select another mode and then remove the USB device from the USB connector. NOTE: After loading a USB device, files and folders are accessed in the order in which they were written to the device. Therefore, the playing order may not be the same as the order in which they are expected to be played. MS2A iPOD® OPERATION Turning the iPod On/Off This unit is equipped with an iPod ready function that will allow you to control your iPod (if compatible) using the control panel buttons. The following iPod versions are supported: • iPod Nano – 6G, 7G • iPod Classic • iPod Touch – 4G, 5G • iPhone – 4, 4S, 5, 5C, 5S The iPod power turns on automatically when an iPod is connected to the USB connector, as long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it or by turning the ignition off. When the ignition is turned off, the iPod will pause and then enter sleep mode after 2 minutes. While the iPod is connected, the power cannot be turned on or off from the iPod itself. NOTE: The iPod will continuously recharge when connected to the unit, as long as the vehicle ignition is turned on. NOTE: Earlier model iPods may not be supported because they do not implement the USB control protocol. The iPod Shuffle is not supported because it does not utilize the 30-pin Apple iPod Connector. These unsupported iPod models may be connected to the radio using one of the Auxiliary Inputs. Controlling Playback Selecting Tracks During playback, press the ►►| SEEK/TUNE/TRK button (14) to play the next track in the current category. Press the |◄◄ SEEK/TUNE/TRK button (13) twice to play the previous track. After the first 2 seconds of the playback. Press and hold the ►►| SEEK/TUNE/TRK or |◄◄ SEEK/TUNE/TRK buttons to fast reverse/forward the song. Accessing iPod Mode Pausing Playback During playback, press the 1/|| button (5) to pause playback. “Pause” will appear on the LCD. Press 1/|| button again to resume playback. Repeat Play During playback, press the 2/RPT button (6) to repeat the current song. “REPEA” will appear on the LCD. Press 2/RPT again to stop repeat playback. Random Play During playback, press the 4/RDM button (8) to play all songs in the current category in random order. Random play will begin once the current song has finished playing. “SHUFF” will appear on the LCD. Press 4/RDM again to stop random playback. Connect a supported iPod or iPhone to the USB connector. The iPod icon illuminates in the bottom right left corner of the LCD whenever an iPod or iPhone is attached to the USB connector. Music playback begins automatically. NOTE: If you press and hold the ►►|SEEK/TUNE/TRK or |◄◄SEEK/TUNE/TRK button to change the current song to the previous/next song, you will exit fast reverse/forward mode. To enter iPod mode from any other source, press the MODE button (4) until “USB” appears on the display. If the user connects an iPod containing no songs, the radio will display a message stating “No Songs” when it enters iPod mode. 10 MS2A Alternate Display Information Press the DISP button (12) to change the display information in the following order: ARTIST >TITLE > FOLDER > FILE NAME > ARTIST. Search Mode Press and hold the BAND/SEARCH button (16) to enter iPod search mode and choose from the following search criteria: Playlist, Artist, Album, Song, Genre or Composer (consecutively). When search mode is selected, press the ENTER button (18) to confirm selection. Use the VOL+ UP or DOWN VOL- button (2) to navigate through various list selections. Press ENTER (18) to make your final selection. 11 MS2A BLUETOOTH OPERATION The MS2A includes built-in Bluetooth technology that allows you to wirelessly connect Bluetooth devices to this head unit for streaming audio playback. BT Device Press Enter Use VOL+ UP or DOWN VOL- to Navigate the List Device 1 Device 2 Device 3 Device 4 Device 5 About Bluetooth Technology Bluetooth is a short-range wireless radio protocol. Operating in the 2.4 GHz range, it transmits voice and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters. Press Enter Bluetooth Menu Options NOTE: Please note that some BT menu options are only available while the unit is in BT Audio mode Device 1 … … Press and hold the AUDIO/MENU button (3) to enter menu adjustment mode. Repeatedly press the AUDIO/MENU button to access the following Bluetooth Menu options: • BT ON/OFF: Press the VOL+ UP or DOWN VOL- button (2) to choose “BT ON” or “BT OFF”. • BT PAIR: Press the VOL+ UP or DOWN VOL- button to choose “ON” or “OFF”, and then press the ENTER button to enter the selection. • BT DEVICE: Press the ENTER button to view devices from the list. Press the VOL+ UP or DOWN VOL- buttons (2a, 2b) to view a list of previously paired mobile devices. Press the ENTER button to select the device. Press the VOL+ UP or DOWN VOL- button to choose Lock/Unlock, Disconnect or Delete for this device. You cannot delete a device that is actively connected. • LOCK/UNLOCK: The MS2A can store up to 5 devices for BT connection. The devices are stored in FIFO (First in First Out) order. To prevent a device from being bumped from the list when more than 5 devices are used, you must lock the device. To Lock/Unlock a device, press the ENTER button to display/change the Locked ( ) or Unlocked ( ) icon. • DISCONNECT: To disconnect a paired device, press the ENTER button to temporarily remove the BT link. The link can be re-established through your phone menu by selecting the MS2A for connection. • DELETE: To delete a device from the list, press the ENTER button. Lock/Unlock Connect/Disconnect Delete … Device 5 Lock/Unlock Connect/Disconnect Delete Pairing a Bluetooth Device Before you begin, consult the owner’s manual for the Bluetooth device you want to pair with the MS2A. 1. Make sure the device is on and ready to receive a signal from the MS2A. With the MS2A in BT Audio mode, choose BT PAIR from the MS2A menu and press the DOWN VOL- button to select ON. The unit is waiting to connect to a mobile device. With the BT function of the mobile device turned on, search for a Bluetooth device. 2. When the Bluetooth device has completed its search, the mobile device will display the Bluetooth device name (MS2A). 3. Select MS2A. The Bluetooth Audio icon ( ) will show on the radio LCD display. 4. Enter the pairing password (0000), if requested. After connecting successfully, you are able to listen to music stored on your Bluetooth enabled device through the radio. 12 MS2A APP OPERATION Receiving a Call While Listening to Music When answering a call using a connected phone, BT AUDIO will pause. After hanging up from the call, BT AUDIO will continue on some phones. It may be necessary to press the play button to resume BT AUDIO. JENSEN® Specialty Controller is the ultimate wireless remote control for your JENSEN stereo system. Store away your old remotes and enjoy the convenience of all the primary functions of your JENSEN stereo right from your phone or tablet by transforming your mobile device into a functional stereo remote control! BT Audio (A2DP) When connected, a Bluetooth enabled device is able to stream audio to the MS2A. To access Bluetooth mode and play songs stored on your phone, press the MODE button (4). While in BT mode , the BT AUDIO icon ( ) illuminates on the LCD. Selecting Tracks During playback, press the ►►| SEEK/TUNE/TRK or |◄◄ SEEK/TUNE/TRK buttons (13, 14) to play the previous or next track. Pausing Playback During playback, press the 1/|| button (5) to pause the BT AUDIO player. “BT AUDIO ||” will appear on the LCD. Press 1/|| again to resume playback. If you change to another mode, the mobile phone audio will pause. Press the MODE button (4) to return to BT mode and resume mobile phone audio playback. Features This app controls all of the primary functions of your stereo features including: • Power on/off • Volume and mute • AM/FM radio tuner: access station, recall, store presets, switch songs • Bluetooth® streaming audio • File structure visibility, track selection, track audible scan up and down via USB • iPod/iPhone/iPad® control capabilities via USB • Auxiliary audio input control –auxiliary analog 1 • Audio menu controls- bass, treble, balance, fader, equalizer and volume • Visual display feedback so you can see artist title and album on your mobile screen NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the device is disconnected inadvertently, the unit will automatically search for the matching Bluetooth device when the power is restored. Connecting and using jControl app After downloading and installing jControl app on your apple device, pair your device to the MS2A as stated above for Bluetooth paring. Once your device is paired you can open the app and use as instructed with the jControl app manual found at http://asaelectronics.com/manuals-guides. When jControl is installed on Android operating system, close the app before Bluetooth pairing, otherwise there may be errors on Bluetooth connection. 13 MS2A CARE AND MAINTENANCE TROUBLESHOOTING Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the product. Use and store the product only in normal temperature environments. High temperature can shorten the life of electronic devices, damage batteries, and distort or melt plastic parts. Symptom No Power Cause Solution The vessel’s accessory If the power supply is switch is not on properly connected to the vessel’s accessory terminal, switch the ignition key to “ACC” No Sound Fuse is blown Replace the fuse Volume is too low Adjust volume to audible level Wiring is not properly Check wiring connections connected Ignition The most common source of noise in reception is the ignition system. This is a result of the radio being placed close to the ignition system (engine). This type of noise can be easily detected because it will vary in intensity of pitch with the speed of the engine. The Operation keys do not Wired commander is not Check wired commander work properly installed installation and connection Built-in microcontroller is Press the RESET button not operating properly located on the back of the Tuner/Amp Module Usually, the ignition noise can be suppressed considerably by using a radio suppression type high voltage ignition wire and suppressor resistor in the ignition system. (Most vessels employ this wire and resistor but it may be necessary to check them for correct operation.) Another method of suppression is the use of additional noise suppressors. These can be obtained from most CB/A radio or electronic supply shops. Interference Radio reception in a moving environment is very different from reception in a stationary environment (home). It is very important to understand the difference. AM reception will deteriorate when passing under a bridge or when passing under high voltage lines. Although AM is subject to environmental noise, it has the ability to receive at great distance. This is because broadcasting signals follow the curvature of the earth and are reflected back by the upper atmosphere. 14 MS2A SPECIFICATIONS FM Radio Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 107.9 MHz Frequency Coverage (Europe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87.5 to 108 MHz Sensitivity (S/N = 30dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4uV Image Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>45 dB Stereo Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >25 dB AM/MW Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .530-1710 kHz Frequency Coverage (Latin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .520-1620 kHz Frequency Coverage (Europe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .522-1620 kHz Sensitivity (S/N = 20dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30dB General Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 12 Volts Grounding System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Negative Ground Speaker Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 ohms per channel Tone Controls: Bass (at 100 Hz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..±14dB Treble (at 10 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±13dB Power Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40W x 4 Current Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Ampere (max.) Chassis Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182(L) x 52.2(W) x 173(H) Front Panel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188(L) x 58(W) x 21(H) 15 ASA Electronics Corporation www.asaelectronics.com www.jensenmarinedirect.com © 2015 ASA Electronics Corporation v.100615
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Kelly Li Create Date : 2015:06:16 10:13:43+08:00 Keywords : MS2A Modify Date : 2015:06:16 10:13:43+08:00 Subject : MS2A User Manual Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.143651, 2012/04/05-09:01:49 Format : application/pdf Creator : Kelly Li Description : MS2A User Manual Title : MS2A User Manual Creator Tool : Microsoft® Word 2010 Producer : Microsoft® Word 2010 Document ID : uuid:4f97b5b5-f3fa-4274-a598-acb7d1901270 Instance ID : uuid:79042bb5-198c-48e6-b049-fc165579aa92 Nxpl Tag : S6.2.9-37C800-813125 Schemas Schema : NXPowerLite tag schema Schemas Namespace URI : http://ns.neuxpower.com/pdf/tagging/ Schemas Prefix : nxplPDF Schemas Property Name : nxplTag Schemas Property Value Type : Text Schemas Property Category : internal Schemas Property Description : NXPowerLite tag Page Count : 18EXIF Metadata provided by EXIF.tools