SOUNDMAX ELECTRONICS DP6290 Car Radio User Manual 2

Soundmax Electronics Limited Car Radio 2

User Manual

GeneralPower SupplyOperating TemperatureDimension (WxHxD)FuseSuitable speaker impedanceMaximum power outputContinous power output12V DC (11V to 16V), negative ground-20~+60188 x 58 x 137.8mm15A4-8Ω4x40W 20W x 4RMS (4Ω10%T.H.D)2.0VRadio TunerFrequency RangeFM TunerAM TunerFM 87.5MHz to 108.0MHz522kHz to 1620kHz0.8uV30 uVAMUsable Sensitivity (S/N=20dB)Sensitivity/Selectivity (S/N=20dB)Pre-AMP output voltageAux-In level ≥500mVDP-6290DABSize: 525x296mm  (After Folding size: 105x148mm                                  )Color: 4 color printingPaper: 105g粉纸Printing: Double side printedFrontwww.grundigcarradio.comInstalling the unit Remove the unitRemove the unit18 2mm53mm123ScrewDashboardSleeveTrim PlateControl PanelBend  the  appropriate tabs to hold the sleeve firmly in place.ISO ConnectorWiring ConnectionDisassemblySleeveTrim plate2ISO ConnectorISO Connector Wiring ChartPinA5A4A8A7YellowBlackRedBlueConnect to system control terminal of the power AMP or auto antenna relaycontrol terminal (Max 150MA12VDC)   Battery(+)Ignition(ACC)GroundB1/B2B3/B4Violet/BlackVioletGrey/BlackGreyWhite/BlackGreen/BlackWhiteGreenB5/B6B7/B8Right rear speakerRight front speakerLeft front speakerLeft rear speaker+Color and function Pin Color and functionAntennaJackAntennaJack Press increas the volume.Press decreas the volume.AUDIOSRCRemote Control Operation Tuner Mode: Press to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode.Press to access into the Audio Menu mode.Press to mute or restore volume.Select the available Source.SRCAUDIO(Optional)SWC adaptor (not include)SWC adaptor (not include) Steering wheel remote(SWC)   Steering wheel remote(SWC)   OE SWC IR Remote In (Purple)OE SWC IR Remote In (Purple)(OPTIONAL)Note: You can operate this unit using the Steering Wheel remote controller ( SWC ). For details & compatible SWC adaptor or black box, please consult the same car audio dealer as where this unit is purchased.Ground (Black)Tuner Mode: Press to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode.Media Playback Mode: Press to track Up/Down, press and hold for fast forward/backward.BT Audio Mode: Press to track Up/Down. DAB Mode: Press to tune to a detected station.Tuner Mode: Select the FM bands (FM1/FM2/FM3) or AM1/AM2. Press and hold to access into Auto Store mode, the six strongest stations of the selected band will be saved in preset channel automatically: FM1, FM2, FM3(1-6), AM1, AM2.Media Playback Mode: Press to access into search Folder/File music mode.DAB Mode: Press repeatedly to select a band: DAB1,DAB2 or DAB3. Press and hold to starts searching for on-air DAB radio stations.Returns to the previous item.BT Handfree Mode: To reject/end a call.Press and hold to switch between Clock and Source Name.Tuner Mode: Press to view RDS received information.Media Playback: Press to view ID3 informations.DAB Mode: Press repeatedly to display available information that is transmitted by a DAB radio station.Tuner Mode: Press the Numeric buttons to recall the preset stations. Press and hold the Numberic buttons to store the listening station.Media Playback: Press the Numeric buttons to perform the below operation:DAB Mode: Press the Numberic buttons to store the listening station.BT Handfree Mode: During a telephone conversation, press and hold to transfer the call back to the Hand phone for privacy.Select the available Source. if the,power is turned on.Use Bluetooth DevicePairing the Bluetooth deviceMaking a callReceiving a CallCall TransferOn your Bluetooth-enabled device, follow the steps below.1.  Search for Bluetooth devices.2.  In the device list, select DP6290.3.  Enter the default password "0000", and then confirm the       password entry.                If the pairing is successful, the device name will be                 displayed on the LCD screen of this system.You can dial number through the mobile phone.1.  Use the Mobile Phone to dial and make an outgoing call2.  Once completed the dialing, the phone number and [CALLING]       is  displayed.1.  If there is an incoming call, the phone number will be displayed.       If the incoming call has no phone number, [PHONE IN] will be       displayed.You can transfer voice from car speakers to mobile phones during a telephone conversation. During a telephone conversation, press and                                    2.  Press                  to answer / accept the call.3.  When conversation ends, press                   to terminate the call.Product Specifications +Listen to Digital Audio Broadcasts (DAB)Digital Audio Broadcasting (DAB),  is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information.Overview of the unit Main Display Main Display Encoder Volume KnobEncoder Volume Knob1.  Press and hold                   access into the Setup Menu.2.  Press                  repeatedly until [ SCAN         ] is displayed.3.  Press                   ,  the product starts scanning for on-air DAB radio              stations,         the detected stations are saved in the flash memory.1.  Press and hold                  access into the Setup Menu.2.  Press                  repeatedly until [PRUNE         ] is displayed.Scan for on-air stationsTo remove invalid stations from the listof scanned stations, press                 . To exit the system menu, press                 .Adjust Setup Menu SettingsWhen you press or hold the following button(s)...Playing a USB device1.   Slide the USB socket cover            to        right.2.  Insert the USB device into the USB socket.3.  Press                   to select USB mode, the unit starts playing from             the USB device.1.   Slide the USB socket cover                 to right.2.   Insert the iPhone/Smart Phone device into the USB socket. 3.   Once he iPhone/Smart Phone is connected and recognized, the        iPhone/Smart Phone begins to charge.    NOTEThis USB only can charge Phones, but cannot play or decode music files  stores inside the Smart Phones.USB Smart Phone 1A charging1.  Press                    to select AUX mode.2.  Turn on the external component and start playing.Listening to external Aux inputAux input jackAux input jackREAR FRONTL LRRFUSEAB123445567788SUB-WANTEENASOCKET DABSOCKETGround (Black)DP-6290DABDP-6290DABDIGITAL RADIO TUNERDAB/DAB+Power/MutePower/Mute USB terminalAux-In jackWhen you press or hold the following button(s)...General operationMain UnitPresetNumericButtonsUSB terminalAux-In jackShort press to mute or restore volume.Turn the unit on. Press and hold again to turn the unit off.Confirm selection.Rotate it to increase or decrease the volume.Rotate it to select items.Press repeatedly to select a preset sound equalizer.Press to access into the Audio Menu mode to adjust the below options:FLAT->POP->USER->TECHNO->ROCK->CLASSIC->JAZZ->VOCALPress and hold to access into the System Menu.Play/Pause Intro Repeat Folder DownFolder Up hold                   voice transfers from car speakers to mobile phone.1.  Press and hold                 access into the Setup Menu.Antenna Power Supply 12V On/Off[12V ON]: Disable Antenna power supply (12V).[12V OFF]: Enable Antenna power supply (12V).For the first time when DAB mode is switched on.      Press                 on the main unit repeatedly to select DAB/DAB+.The system performs auto scan.All the available DAB stations are stored.The radio tunes to the first available station2.  Press                repeatedly until [12V ON] or [12V OFF] is displayed.3.  Rotate                     to select an option, and then press               to       confirm.Erase the DAB station list Adjust Microphone PositionFor better sound quality in make/receive phone call through Bluetooth, place the microphone near the mouth.1.  Make sure the supplied microphone is connected to the car audio system. 2.  Place the microphone at a proper location, for example:  Stick it onto the dashboard clip it on the sun-shieldTape1.  Press and hold                   access into the Setup Menu, and then       press repeatedly to select the item to be adjusted2. Rotate                      to select a value/option.3. Press the                     button to exit.System ModeTuner ModeBT ModeSelectable settingSelectable settingSelectable settingAdjust the Hours and MinutesTurn On or Off the RDS function. Select the time format 12H or 24HON: The unit will search for another station with stronger signal, but with the same program identification as the current station automatically.OFF: Turn off AF functionAdjust the LCD display backlight level between Hight or LowON: Turn on the RDS clock. Time shown on the unit will synchronizes with the clock time of the RDS station.OFF: Turn off the RDS clock. Turn On or Off this beep soundON: When there is traffic announcement,unit will automatically switch to the tuner mode (regardless of the current mode) and begins to broadcast the announcemet on traffic conditions. When the traffic announcement is over, unit will automatically return  to the previous mode.Clock SetRDS On/OffClock FormatAF(Alternate Frequencies)CT(Clock Time)Beep ToneDimmerTA(Traffic Announcement)Once inside the PTY mode, press the get into program type item, and rotat encoder volume knob to selected category.     PTY  (Program Type)Available Program Type: POP M; ROCK M; EASY M; LIGHT M; CLASSICS; OTHER M; JAZZ M; COUNTRY; NATION M; OLDIES M; FOLK M; A-TEST; ALARM; NEWS; AFFAIRS; INFO; SPORT; EDUCATE; DRAMA; CULTURE; SCIENCE; VARIED; WEATHER; FINANCE; CHILDREN; SOCIAL; RELIGION; PHONE IN; TRAVEL; LEISURE; DOCUMENT OFF: Traffic announcement does not cut in.This feature allows to Re-connect or Dis-connect to the paired mobile phone or Bluetooth device by manually. RE-CON/DIS-CONON: only stations with strong signal can be broadcast.  The Local indicator will light up.LocalArea Select suitable country area for  this unit: EUROPE; ASIA; MID-EAST; AUSTRIA; USA; LATIN; OFF: Stations of both strong and weak signals can be broadcast.ResetRestore the factory default settings.DP-6290DABDP-6290DABDP-6290DAB3.5 mm Cable(not included)3.5 mm Cable(not included)MICAudio Format                                               60000Play Back Folder                                          255FLAC/WAV/MP3/WMA Folder                 60000USB                                                                  USB1.1 Full speedUSB Port                                                         Type AUSB Voltage                                                  5.0VSupports Audio Format Maximum USB Memory Size                   32GUSB Flash Drive and Hard                         FAT16/FAT32   USB DeviceDAB Tuner Sensitivity                                                      -100dBm(Band III)Selectivity                                                      40dBFrequency Range                                        174 - 240MHzBluetoothFrequency Band                                          2.4000 Ghz - 2.4835GHz ISM                                                                           BandCompatible Bluetooth Profiles                 Hands-Free Profiles (HFP)A2DP(Advanced Audio Distribution Profile)AVRCP1.3(Audio/Video Remote Control Profile)Range                                                             3 meters (free space)Standard                                                        Bluetooth 2.1 specificationOutput Power                                               Class 2External MicrophoneExternal MicrophoneDisassembly1Media Playback Mode: Press to track Up/Down, press and hold for fast forward /backward.0700(OPTIONAL)BT ID: B018387FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and(2) This device must accept any interference received, including interference that may cause undesired operation.2. any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency nergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Navigation menu