SOUNDMAX ELECTRONICS NA87 Car Audio System player User Manual NA87 ENG IM Y 151202

Soundmax Electronics Limited Car Audio System player NA87 ENG IM Y 151202

User Manual

Car Audio System PlayerNA87INSTRUCTION MANUAL MP3 WMA USB SD AUX-IN BT 1A USB Universal Charge
SafetyTo prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit.Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth.WARNINGImportant to know...MaintenanceCaution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident.Condensation: When the car is air-conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.The illustrations in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment.If you experience problems during installation, consult your Nakamichi dealer.When you purchase external components, check with your Nakamichi dealer to make sure that they work with your model and in your area.Stop the car before operating the unit.Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.This quipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Note: 2 EN Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC ID :2AB7S-NA87
How to reset your unit3Reset2To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.1If this unit fails to operate properly, press the reset button.The unit returns to factory settings when the reset button is pressed.Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing.What’s in the boxCheck and identify the contents of your package:Keep the faceplate in its casing while detached.The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.How to attach/detach the faceplatePreparation1212Attach DetachEN 3Main unit (with sleeve)Carrying case (for front panel)Disassembly tool (2pcs)Front panelRemote controlTrim plateISO male connectorUser manual
Installation / Connection Basic Procedure1 Remove the key from the ignition switch, then disconnect the terminal of the car battery.2 Make proper input and output wire connections.3 Install the unit to your car.4 Reconnect the terminal of the car battery.5 Reset the unit. W arningThe unit can only be installed in a car with a 12 V DC power supply, negative ground.If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.Disconnect the battery’s negative terminal and make all electrical connections before installing the unit.Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.Be sure to ground this unit to the car’s chassis again after installation.If the power is not turned ON, the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked.CautionIf your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die.Install this unit in the console of your vehicle. Make sure the faceplate will not hit the lid of the console (if any) when closing and opening.After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.Mount the unit so that the mounting angle is 30° or less.If the fuse blows, first make sure the wires are not touching to cause a short circuit, then replace the old fuse with one that has the same rating.When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear).Mounting and wiring this product requires skills and experience. For safety’s sake, leave this work to professionals.If you experience problems during installation, consult your Nakamichi dealer.Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the wires or ground them to any metal part in the car.W iring ConnectionISO Connector Wiring ChartPin Color and function Pin Color and functionA5A4A8A7YellowBlackRedBlueConnect to system control of the power AMP or auto antenna relaycontrol terminal(Max 150MA 12VDC) terminal Battery(+)Ignition(ACC)GroundB1/B2B3/B4/ Violet/BlackViolet +/ Grey/BlackGrey +/ White/Black/ Green/BlackWhiteGreen++B5/B6B7/B8Right rear speakerRight front speakerLeft front speakerLeft rear speakerFM/AM Antenna SocketAntenna Jack n(ot included)Rear RCA Output (Left)Rear RCA Output (Right)ISO Connector1234567845 78ABLRRearSubwoofer Output4 EN
234Control panelTrim plate mm18253 mmScrewDashboardSleeve13Trim plate Sleeve Control panel121Removing the unitBend the appropriate tabs to hold the sleeve firmly in place. 2Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the bottom side.) 1 Detach the control panel.2 Engage the catch pin on the removal tools into the holes on both sides of the escutcheon, then pull it out.3 Insert the disassembly tools deeply into the slots on each side, then follow the arrows instructions as shown on the right.DisassemblySleeveDisassemblyTrim plateControl panel123Installing the unit( not included in this packing )EN 5
When you press or hold the following button(s)...Main unit General operationSRC ■■■■■■■■ ■■■Select the available sources (Radio, USB, SD, BT AUDIO or MP3-LINK ), if the power is turned on. Rotatory Volume knobRotate it to increase or decrease the volume.Select items.Power / Mute Confirms selection.Under Media playback mode to view play informations.BAND ■Select the FM bands (FM1/ FM2/ FM3) or AM1 (MW1) / AM2 (MW2) . ■Under media playback to access into search mode. Pause/resume playback of a USB / SD device. ■Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode. ■Under Media playback mode to skip track / file, press and hold to fast forward / backward. MENU To access into the Audio Menu mode, press and hold to enter into the System Menu mode.Turn On or Off dynamic bass boost sound.Turn On or Off the Xbass bosster function.During the talking, press and hold to transfer the call.DBSSTurn mute or restore volume.Turn the unit on. Press and hold again to turn the unit off. 1SUB-WPress to view the Clock. Press & hold to turn On or Off the Subwoofer function.Returns to the previous item.To reject / end the call.EQ / XBASSBasic OperationTo adjust the EQ (Preset Equalizer) setting.To answer / accept the call./ MENUSUB-WDBSSXBASSBANDSRC EQ123 456Detaches the control panelRotary Volume Knob Display WindowPower / MuteUSB terminalAux-In jackPush open the cover■Press and hold to activate the Auto Store function.6 EN
Function Settings1 Press to access into the [AUDIO MENU] mode, press and hold to enter into the [MENU] mode.2 Press repeatedly to select the item to be adjusted.3 Turn the encoder volume knob to select a value / option.MENU[AUDIO MENU]...[MENU]...Item Selectable SettingItem Selectable SettingBASS ADJUSTTREBLE ADJUSTBASS LEVELCLOCK SETTREBLE LEVELCLOCK FORMATBEEP TONEBALANCEFADER Adjust the level -7 to +7. Adjust the Hours and Minutes Adjust the level -7 to +7. Select the time format 12H or 24H Turn On or Off this beep sound Adjust the balance between the right and left speakers from 10R (full right) to 10L (full left). Adjust the fader between the front and rear speakers from 10R (full rear) to 10F (full front). MENUCLOCKEN 7
Listening to the Radio2 Press to search for a station.Adjust [MENU] mode settingsWhile listening to the radio...Item Selectable SettingAREALOC ON/OFF ON: Search for radio stations with strong signals only.OFF: Search for radio stations with strong and weak signals.Select suitable country region of the radio: USA; LATIN; EUROPE; RUSSIA(Oirt); M-EAST; ASIA; JAPAN; AUST (Australia)To receive more radio stations or only stations with strong signal, you can adjust the radio sensitivity.1 Press and hold to enter into the [MENU] mode.2 Press repeatedly to select the item to be adjusted.3 Turn the encoder volume knob to select a value / option.MENU■■STORE Press the to access into Auto Store mode, the six strongest stations of the selected band are saved in preset channel automatically: FM1, FM2, FM3(1-6), AM1, AM2.MENUSUB-WDBSSXBASSBANDSRC EQ123 456Hold for about 2 seconds to memorize the current station .Press briefly to recall memorized station.■■MENU1 Press repeatedly to a band ( FM1, FM2, FM3, AM1(MW1) or AM2 (MW2)). Press and hold to activate the Auto Store function.BAND8 EN
Listening to a USB/SD deviceMENUSUB-WDBSSXBASSBANDSRC EQ123 456Detaches the control panelPress to select a track / file.Press and hold for fast forward / backward.■■Press into search mode Press to pause. Press again to resume playback.Press to repeat one track, press again repeat a folder.Press to start random play, press again to random a folder.Press to move next/previous folder.USB terminalPlaying a USB device1 Slide the USB socket cover market to the left.2 Insert the USB device into the USB socket.Playing a SD memory card1 Press the Panel (Release) button.3 Insert the card into the card slot.2 Push the left side of the panel rightward4 Close the front panel.3 Press the “SRC” button to select the USB mode to start playing.5 Press the “SRC” button to select the SD mode to start playing.EN 91 Press the SRC to select AUX-IN mode.2 Turn on the external component and start playing.1A USB Universal ChargeMENUDBSSXBASSBANDSRCEQ123 456Auxiliary input jack3.5 mm Cable(not included)Listening to the other external componentsSUB-W3 Once the Smart Phone is connected and recognized, the Smart Phone begins to charge.1 Slide the USB socket to left.2 Insert the Smart Phone device into the USB socket.
MENUSUB-WDBSSXBASSBANDSRC EQ123 456Operation of Bluetooth Hands-Free Press to answer / accept the call.Press and hold to transfer the call.■■Press to reject / end the call.Getting StartedYou can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetooth-enabled device.Before use the Bluetooth device, you need to pair the device to the unit. Pairing needs only to be done once.1 Open your mobile phone and switch bluetooth on.1 Press and hold to enter into the [MENU] mode.1 Press and hold to enter into the [MENU] mode.2 Search for other bluetooth device with your device.2 Once the [DIS-CON ] is displayed, press to activate the manual Disconnect mode.2 Once the [RE-CON ] is displayed, press to activate the manual Re-connect mode.4 Input the password “0000” 5 [Paired] will be displayed on the screen if pairing is successful, and the paired device will connect to the car audio system automatically. 3 Select “NAKAMICHI” in the pairing list.Making a CallReceiving a CallCall TransferBluetooth Audio Streaming A2DPYou can dial number through the mobile phone.Pairing the Bluetooth devicesDisconnect the bluetoothRe-connect the bluetoothMENU 1 Use the Mobile Phone to dial and make an outgoing call.1 Press on front panel to redial.2 Press , unit will display [CALLING], and the unit starts dialing the number dialed last time.2 Once completed the dialing, [CALLING] is displayed.To redial number 1 If there is incoming call, the phone number is displayed. if the incoming call has no phone number, [PHONE IN] is displayed.2 Press to answer / accept the call.3 When conversation ends, press to terminate the call.You can transfer voice from loudspeaker to mobile phones during ca ll .If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the unit. If the device also supports Audio Video Remote Control Profile (AVRCP) profile, you can use the control on the unit or its remote control to play music stored on the device. During talking, press and hold voice transfers from loudspeaker to mobile phone. 1 Press SRC repeatedly to select [BT AUDIO].2 Press to start play, press it again to pause.3 To track up/down, press / .MENU To make an outgoing call on this unit, the bluetooth connection between the unit and the phone must be active.Remark:Press to change to "BT AUDIO" mode10 EN
When you press or hold the following button(s)...Main unit General operationPress increas the volume.Press decreas the volume. ■Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode. ■Under Media playback mode to skip track / file, press and hold to fast forward / backward. Turn mute or restore volume.Press turn the unit on or off. Remote Control OperationAUDIOSRCSRCAUDIOSelects the available sources (Radio, USB (USB-iPod/iPhone), SD, BT AUDIO or Aux-In ), if the power is turned on. Press to access into the Audio Menu mode.EN 11
Product InformationPower Supply: 12V DC (10.5-14.4V), negative ground Fuse: 15ASuitable Speaker Impedance: 4 -8 GeneralAux-In level: 800mVAudio SectionMaximum Power Output: 50W x 4 ChannelsPre-AMP Output Voltage: 1.5VSubwoofer Output Voltage: 1.5 V USB devicesMemory CardUSB Flash Memory: USB 1.1 & 2.0 CompatibleSupport type of memory card: SD/SDHCAbout Audio fileMP3/WMA bit rate: 32-320kbps and varible bit rateMP3 sampling frequencies: 8-48kHzWMA sampling frequencies: 32kHz, 44.1kHz, 48kHzID3 tag v1.0 or later USB or memory file system: FAT16, FAT32■BluetoothOutput power: Class 2Frequency band: 2.4000GHz-2.4835GHz ISM BandRange: 3 meters (free space)Standard: Bluetooth 2.0 specificationContinous Power Output: 22W x 4 RMS■■■■Output Current: 1000 mA (1A)Output Voltage: 5 V DCUSB Smart Phone 1A charging12 ENSupported WAV audio files ■FM tuner sectionAM tuner sectionFrequency Range: 87.5 -107.9MHzFrequency Range: 530 - 1710KHz Usable Sensitivity: Better than 40dB at S/N 20dBUsable Sensitivity: Better than 8dB at S/N 30dB(USA)(USA)87.5 - 108MHz (Middle East) 87.5 - 108MHz (Europe)87.5 - 108MHz (Latin)87.5 - 108MHZ (Oirt FM1 & FM2 ) 87.5 - 108MHz (ASIA) 76 - 90MHz (Japan) 87.5 - 108MHz (Australia) 522 - 1620KHz (Middle East) 522 - 1620KHz (Europe)530 - 1710KHz (Latin)522 - 1620KHz (Oirt) 522 - 1620KHz (ASIA) 522 - 1629KHz (Japan) 522 - 1620KHz (Australia) 65-74 MHZ (Oirt FM3 ) 2.402-2.480GHz ISM Band
www.nakamichicaraudio.com

Navigation menu