Source Pro 49314937 LED Mirror with Bluetooth Speaker User Manual
Source Pro Industries Ltd. LED Mirror with Bluetooth Speaker
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2749465 |
| Application ID | cp3JBGT0sWpV5l+Sk110rg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 116.17kB (1452167 bits) |
| Date Submitted | 2015-09-16 00:00:00 |
| Date Available | 2015-09-16 00:00:00 |
| Creation Date | 2015-09-14 11:16:11 |
| Producing Software | Adobe Acrobat 11.0.7 Image Conversion Plug-in |
| Document Lastmod | 2015-09-14 11:16:11 |
| Document Title | User Manual |
| Document Creator | Adobe Acrobat 11.0.7 |
Model #SP 4931
USE AND CARE GUIDE
CIRCLE LED MIRROR WITH BLUETOOTH SPEAKER
Table of Contents |
Table of Contents ................................... 2 Installation ...................................... 5-6
Safety Information .................................. 2 Surface Mounting Only ........................... 5-6
Warranty .......................................... 2 Electrical Operation ................................. 7
Important Safety Instructions ......................... 3 Electrical Specifications .............................. 8
Pre-lnstallation ..................................... 4 Mechanical Specifications ............................ 8
Planning Installation ............................... 4 Care and Cleaning .................................. 8
Tools Required .................................... 4
Safety Information |
1. This equipment has been tested and found to comply with the WARNING-S f I d' d II ki _ | K
limits for class B digital device, pursuant to part 15 of the FCC . ' a e y 'scar a pac "9 materia. eep
Rules. plastic bags and small parts away from children.
2. This Class B digital apparatus compiles with Canadaian ICES- CAUTION: please ensure a“ the accessories are removed
003- from the packing before you discard.
3. Save these installation instructions for furture reference. Record
the ”‘Ode' "umber from the Mk” 'abeL CAUTION: Safety glasses should be worn at all times.
CAUTION: To maintain compliance with the FCC’s RF
exposure guidelines, place the base unit at least 20cm from
nearby persons.
DD»
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
[1 Reorient or relocate the receiving antenna.
nlncrease the separation between the equipment and receiver.
I] Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
I] Consult the dealer or an experienced radiolTV technician for help.
Warranty |
This product is guaranteed to operate a minimum of 1 year from the original date of purchase. If, under
normal use and for the full time period, your product fails to operate, please return it to your
local Home Depot (with your original proof of purchase receipt) and we will refund it.
This warranty is considered void if the product fails from misuse. Contact the Customer
Service Team at 1-855-HD-GLACIER or visit HOMEDEPOT.COM/GLACIERBAY.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using this mirror.
DANGER — TO REDUCE THE RISK OF ELECTRIC SHOCK:
1.Always disconnect power at the circuit breaker to the unit prior to performing any maintenance or service operation.
WARNING - TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
1. Disconnect power at the circuit breaker before putting on or taking off parts.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these instructions. Do not use attachments/accessories not recommended by
the manufacturer.
4. Never operate this furnishing if it is not working properly or if it has been dropped or damaged, or dropped into water. Return the
furnishing to a service center for examination and repair.
5. Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
8. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
9. To disconnect, turn all controls to the off position, then disconnect power at the circuit breaker.
10. WARNING: Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD AND INDOOR USE ONLY
GROUNDING INSTRUCTIONS
This product must be connected to a grounded metal, permanent wiring system, or an
equipment-grounding conductor must be run with the circuit conductors and connected
to the equipment-grounding terminal or lead on the product.
Pre-lnstallation |
PLANNING INSTALLATION
l_ Unpack your LED mirror carefully, and close the sink drain to prevent any dropped parts from falling into the drain.
|_ Please read the entire manual before beginning installation and become familiarized with the steps and parts involved.
L_' For surface-mount installation only.
TOOLS REQUIRED
I.
. . . E~ . Electric drill
Measuring a m a m a Level @ Phillips _ . I' for surface . Stud
tape screwdriver . finder
m , mounting
HARDWARE INCLUDED
a NOTE: Hardware not shown to actual size.
CC
Part Description Quantity
AA Plastic wall anchor
BB Phillips head screws (#8 X 1.5 in.)
CC P4 Plastic Shell Closed End Wire Connector Caps 3
CAUTION: The included plastic wall anchors (AA) are
intended for use with solid wall applications only (tile
and concrete). DO NOT USE WITH DRYWALL OR OTHER
HOLLOW WALL APPLICATIONS. Refer to additional warning
information on Page 5 of this instruction manual.
Installation - Surface Mounting Only
1 Drilling Hole on wall
WARNING: If installing the mirror on drywall or
other hollow wall applications, the Phillips head
screws (BB) must be fastened to studs. headers, or
other structural wall members. The included plastic
wall anchors are intended for use with solid wall
applications only (tile or concrete). DO NOT USE WITH
DRYWALL OR OTHER HOLLOW WALL APPLICATIONS.
l_ The center distance of the two drilling holes on wall:
228.5mm (9 inches).
l. Insert the plastic wall anchors into the
holes and then tighten the screws to them.
9.00m
228.50mm
2 Electric Wire Connection
electrician and in accordance with all local and national
: WARNING: This unit must be installed by a certified
electrical codes.
; 1. Loosen 1 Screw to remove the wiring compartment
cover
_‘ 2. Use screw driver to break off one of the knockouts from
the wiring compartment cover so as to form one hole to let
power supply wires to pass through.
NOTE: It is only necessary to remove the knockout(s)
fl that will feed the power supply wiring, keeping in mind the
mirror mounting location and supply wire |ocation..
L 3. Connect power supply wires to the wires of this unit
with wire connectors (CC) - black (Live wire) and white
(neutral). Ground wire should be secured to the green wire
0R yellow-green wire.
; 4. Replace the wiring compartment cover and replace with
the 1 Screw.
Wires of the LED Mirror
Wiring Compartment
cover
Wire Nut
Connect
Neutral Power Source
120V AC 60Hz
Ground
Wiring Diagram
Installation - Surface Mounting Only
3 Position the mirror
L‘ 1. Hang the mirror on the screw heads by engaging with the hanging holes at the back of the mirror.
Electrical Operation
1 Power Connection
CAUTION: TURN OFF MAIN POWER BEFORE INSTALLATION
TO AVOID ANY ELECTRIC SHOCK.
L‘ When the Power Indicator Lamp is turned on (Blue in color),
it means the power connection is OK.
3 BlueTooth Operation Enabling:
C Turn ON the BlueTooth Switch (Diagram 2) manually.
a The BlueTooth Sound (Speaker) Box generates reminding
audio signal and the light of the BlueTooth LED Indicator
(Diagram 2) flashes quickly at the same time.
; BlueTooth automatically enters the searching function, i.e.
enters the status to wait for BlueTooth devices matching.
_‘ The Bluetooth device of this mirror (Model: H0001) can be
searched and connected by the phones.
_ Once successfully connected, the BlueTooth Sound
(Speaker) Box will generate a short audio signal “du” and
the light of the BlueTooth LED Indicator will change from
quick flashing to slow flashing.
BlueTooth Switch BlueTooth LED indicator
'\_—?_e_~{F' Diagram 2
2 LED Circle Light On & Off
L Finger touches the Power Indicator (Diagram 1),the LED
Circle Light is ON. When finger touches the Power
Indicator again, the LED Circle Light is OFF.
L That means, if the previous condition of the LED Circle
Light is ON, once the finger touches the Power Indicator, it
will be OFF and vice versa.
Power Indicator (when
its light is ON, it appears
in blue color)
Diagram 1
4 BlueTooth Function:
I. After successful connection with BlueTooth, the mirror
device can be used to play music and act as a BlueTooth
phone.
L BlueTooth signal covering distance: up t010 meter (open
space).
Electrical Specifications
_ Hardwire Power Supply: Input: 120V AC 60Hz
_ BlueTooth Version: Bluetooth 4.1 + EDR compliant
_ BlueTooth Support Mode: AZDP(1 .3), HFP profile version 1.6 compliant
_ Speaker Output Power: Maximum 4W‘2, Bi-aural
_ LED Light Color Temperature: 3800k
Mechanical Specifications |
[ 1 .26in]
[ 1 .85in :
47mm
[24.0mm ]
(/5 609.60mm
Size: Diameter 24 x 1.85 (T) inches Net Weight: 6.5kg (Including accessories)
Care and Cleaning |
L Use a household liquid glass cleaner to keep the mirror and glass surfaces clean.
L Do not use abrasive cleaners containing ammonia.
L The user can perform cleaning ONLY. All other servicing should be performed by qualified service personnel.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2015:09:14 11:16:11+08:00 Creator : Adobe Acrobat 11.0.7 Modify Date : 2015:09:14 11:16:11+08:00 Title : XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2015:09:14 11:16:11+08:00 Creator Tool : Adobe Acrobat 11.0.7 Format : application/pdf Document ID : uuid:116daf78-065a-40a0-9def-a210a7ba50f0 Instance ID : uuid:d57a19c2-853f-4a02-ab50-3d34a1f2f5e3 Producer : Adobe Acrobat 11.0.7 Image Conversion Plug-in Page Count : 8EXIF Metadata provided by EXIF.tools