Source Pro SP4218VGPBBT Electric Fireplace Heater User Manual
Source Pro Industries Ltd. Electric Fireplace Heater
User Manual
42 INCH LED PORTABLE AND WALL HUNG FIREPLACE
SKU NO.: 810394426
ITEM NO.: CAL-174203A
IMPORTANT INSTRUCTIONS
Please read Electric Fireplace User Manual before assembly and install.
* Please do not return any products to the store, for any missing or replacement parts for electric fireplace insert,
wood pieces or hardware, please contact BIGLOTS Customer Service. Phone: 888-829-1658
Working Hours: Monday - Friday, 9:00AM - 5:00PM (Pacific Standard Time)
PAGE 1 OF 22
PAGE 2 OF 22
IMPORTANT SAFETY INSTRUCTIONS
SKU NO.: 810394426
ITEM NO.: CAL-174203A
WARNING: Any use of this appliance other than that recommended by the manufacturer in this
owners manual may cause fire, burns, electric shock and/or other serious in juries or death.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electrical shock, and injury to persons including the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Read all instructions before installing or using the heater.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
WARNING: In order to avoid overheating, do not cover the heater.
The heater must not be located immediately below a socket-outlet.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
This appliance is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. Keep
combustible material, such as furniture, pillows, bedding, papers, clothes and curtains, at least 3 feet from
the front of the heater and keep them away from the side and rear.
Extreme caution is necessary when any heater is used by or near children or individuals with disabilities and
whenever the fireplace is left operating and unattended.
ALWAYS unplug this appliance when not in use.
DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions. DO NOT operate
any heater if it has been dropped or damaged in any manner. Discard heater, or return to authorized service
facility for examination and/or repair.
DO NOT use outdoors.
This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER place
heater where it may fall into a bathtub or other water container.
DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar covering. Do not
route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be tripped
over.
To disconnect this appliance, turn controls to the off position, then remove plug from outlet.
ONLY connect to properly-grounded outlets.
Do NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an
electric shock or fire, or damage the appliance.
To prevent a possible fire, DO NOT block air intakes or exhaust in any manner. DO NOT use on soft
surfaces, like a bed, where opening may become blocked.
Use this appliance only as described in the manual. Any other use is NOT recommended by the
manufacturer and may cause fire, electric shock or injury to persons.
This appliance has hot and arcing or sparking parts inside. DO NOT use it in areas where gasoline, paint or
flammable vapors or liquids are used or stored. This fireplace should not be used as a drying rack for
clothing. Christmas stockings or decorations should not be hung in the area of it.
ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use with an extension cord or
re-locatable power tap (outlet/power strip).
This appliance, when installed, must be electrically grounded in accordance with local codes, with the current
CSA C22.1 Canadian Electrical Code or follow the National Electrical Code, ANSI/NFPA N0.70.
PAGE 3 OF 22
IMPORTANT SAFETY INSTRUCTIONS
SKU NO.: 810394426
ITEM NO.: CAL-174203A
Electrical Connection
A 15-amp, 120-volt, 60 Hz circuit with a properly grounded outlet is
ƌĞƋƵŝƌĞĚ͘WƌĞĨĞƌĂďůLJ͕ƚŚĞĮƌĞƉůĂĐĞǁŝůůďĞŽŶĂĚĞĚŝĐĂƚĞĚĐŝƌĐƵŝƚĂƐŽƚŚĞƌ
appliances on the same circuit may cause the circuit breaker to trip or
ƚŚĞĨƵƐĞƚŽďůŽǁǁŚĞŶƚŚĞŚĞĂƚĞƌŝƐŝŶŽƉĞƌĂƟŽŶ͘dŚĞƵŶŝƚĐŽŵĞƐ
ƐƚĂŶĚĂƌĚǁŝƚŚϲͲŌ͘ƚŚƌĞĞͲǁŝƌĞĐŽƌĚ͕ĞdžŝƟŶŐĨƌŽŵƚŚĞƌĞĂƌŽĨƚŚĞ
ĮƌĞƉůĂĐĞ͘KEKdĞdžĐĞĞĚƚŚĞĐƵƌƌĞŶƚƌĂƟŶŐŽĨƚŚĞĐƵƌƌĞŶƚƚĂƉ͘>tz^
ƉůƵŐŚĞĂƚĞƌƐĚŝƌĞĐƚůLJŝŶƚŽĂǁĂůůŽƵƚůĞƚͬƌĞĐĞƉƚĂĐůĞ͘EsZƵƐĞǁŝƚŚĂŶ
ĞdžƚĞŶƐŝŽŶĐŽƌĚŽƌƌĞůŽĐĂƚĂďůĞƉŽǁĞƌƚĂƉ;ŽƵƚůĞƚͬƉŽǁĞƌƐƚƌŝƉͿ͘
•
dŚŝƐŚĞĂƚĞƌŝƐĨŽƌƵƐĞŽŶϭϮϬǀŽůƚƐ͘dŚĞĐŽƌĚŚĂƐĂƉůƵŐĂƐƐŚŽǁŶ͘
^ĞĞŝůůƵƐƚƌĂƟŽŶĨŽƌŐƌŽƵŶĚŝŶŐŝŶƐƚƌƵĐƟŽŶ͘ŶĂĚĂƉƚĞƌĂƐƐŚŽǁŶĂƚŝƐ
ĂǀĂŝůĂďůĞĨŽƌĐŽŶŶĞĐƟŶŐƚŚƌĞĞͲďůĂĚĞŐƌŽƵŶĚŝŶŐƚLJƉĞƉůƵŐƐƚŽƚǁŽͲƐůŽƚ
ƌĞĐĞƉƚĂĐůĞƐ͘dŚĞŐƌĞĞŶŐƌŽƵŶĚŝŶŐůƵŐĞdžƚĞŶĚŝŶŐĨƌŽŵƚŚĞĂĚĂƉƚĞƌ
must be connected to a permanent ground such as a properly
ŐƌŽƵŶĚĞĚŽƵƚůĞƚďŽdž͘dŚĞĂĚĂƉƚĞƌƐŚŽƵůĚŶŽƚďĞƵƐĞĚŝĨĂƚŚƌĞĞͲƐůŽƚ
grounded receptacle is available.
•
sŽůƚĂŐĞ͗ϭϮϬs͕ϲϬ,nj
ŵƉƐ͗ ϭϭ͘ϳŵƉƐ
tĂƩƐ͗ ϭϰϬϬtĂƩƐ
ELECTRICAL SPECIFICATIONS
Grounding Pin
Metal
^ĐƌĞǁ
ŽǀĞƌŽĨ
Grounding
Ždž
Grounding Pin
Grounding Means
Adapter
A
B
SAVE THESE INSTRUCTIONS
CAUTION: DO NOT place any objects on top of insert and top air intake vents as this will cause unit to
overheat and can cause a fire.
CAUTION: If the information in this manual is not followed exactly, an electric shock or re may result
causing property damage, personal injury or loss of life.
CAUTION: Under no circumstances should this replace be modified. Parts having to be removed for
servicing must be replaced prior to operating this replace again.
CAUTION: There is a thermostat protective device provide inside of unit. If the inner temperature
overheats or abnormal heating occurs, the thermostat protective device will cut off power supply to
prevent damage or risk of fire.
CAUTION: The heaters MUST NOT be located immediately below a socket-outlet.
CAUTION: Any repairs to this fireplace should be carried out by a qualified service person.
IMPORTANT SAFETY INSTRUCTIONS
PAGE 4 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
127(7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLPLWVIRUD&ODVV%GLJLWDOGHYLFHSXUVXDQWWR3DUW
RIWKH)&&5XOHV7KHVHOLPLWVDUHGHVLJQHGWRSURYLGHUHDVRQDEOHSURWHFWLRQDJDLQVWKDUPIXOLQWHUIHUHQFHLQDUHVLGHQWLDO
LQVWDOODWLRQ7KLVHTXLSPHQWJHQHUDWHVXVHVDQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\DQGLIQRWLQVWDOOHGDQGXVHGLQ
DFFRUGDQFHZLWKWKHLQVWUXFWLRQVPD\FDXVHKDUPIXOLQWHUIHUHQFHWRUDGLRFRPPXQLFDWLRQV
+RZHYHUWKHUHLVQRJXDUDQWHHWKDWLQWHUIHUHQFHZLOOQRWRFFXULQDSDUWLFXODULQVWDOODWLRQ,IWKLVHTXLSPHQWGRHVFDXVH
KDUPIXOLQWHUIHUHQFHWRUDGLRRUWHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQGRQWKHXVHU
LVHQFRXUDJHGWRWU\WRFRUUHFWWKHLQWHUIHUHQFHE\RQHRUPRUHRIWKHIROORZLQJPHDVXUHV
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Modifications not approved by the party responsible for compliance could void user’s authority to operate the
equipment.
This Class B digital apparatus complies with Canadian ICES-003.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
PRE-INSTALLATION
PAGE 5 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
HARDWARE LIST
AA 4 PCS
SCREW (4*38MM)
BB 4 PCS
WALL ANCHOR
CC 4 PCS
SCREW (M6*12)
DD 2 PCS
SCREW (M4*8)
PARTS LIST
A 1 PC
ELECTRIC FIREPLACE
B 1 PC
LEFT FEET
C 1 PC
RIGHT FEET
D 1 PC
WIND SHIELD
E 1 PC
GLASS PNAEL
F 1 PC
REMOTE CONTROL
G Varies
ACRYLIC BEADS
H 1 PC
MOUNTING TEMPLATE
1024mm
MOUNTING TEMPLATE
295mm
PRE-INSTALLATION
PAGE 6 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
IMPORTANT:
Please read and understand this manual before any assembly. Before beginning assembly of
product, make sure all parts are present. Compare parts with packaging contents list. If any
part is missing, or if you have any questions, contact the service center.
3ODFHDOOSDUWVIURPWKHER[LQDFOHDUHGDUHDDQGSRVLWLRQWKHPRQWKHÀRRULQIURQWRI\RX
Remove all packing materials and place them back into the box. Do not dispose of the
packing materials until assembly is complete. Read each step carefully before beginning any
assembly and make sure you understand each step. If you are missing a part, please call for
assistance.
Before you install
Before installing your new fireplace, decide whether you want to install your new fireplace
using a surface mount or freestanding.
Select a location that is not susceptible to moisture, dust and is away from high traffic
locations and things that many catch fire or block openings such as drapes, pillows,
furniture etc.
It is strongly recommended that the screws be screwed into the wall studs where possible.
If the wall studs cannot be used, wall anchors must be used.
CAUTION: Enclosed wall anchors (BB) only can be use on the concrete wall.
For the best effect install the fireplace out of direct sunlight and away from overhead
lighting.
Tools Required
MEASURING TAPE LEVEL
PHILLIPS SCREWDRIVER ELECTRIC DRILL
STUD FINDER
Ƈ
Ƈ
Ƈ
Ƈ
INSTALLATION
PAGE 7 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
The Fireplace can be installed with 2 options:
1. Mount the unit on the wall.....Page 8
2. Freestanding.....Page 12
INSTALLATION - WALL MOUNTING
PAGE 8 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 1
Before installing your fireplace, determine the desired location.
STEP 2
Remove the glass cover (E) by unscrew four screws as shown.
MIN.
6 In. 15mm
MIN.
6 In. 15mm
MIN.
6 In. 15mm
DD
DD
E
INSTALLATION - WALL MOUNTING
PAGE 9 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 3
Place the mounting template (H) to the desired location, then mark down the drill hole on the
wall. Make sure the template is level.
DD
295mm~~11.6in
1023.9mm~~40.3in
INSTALLATION - WALL MOUNTING
PAGE 10 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 4
Select the hardware appropriate for fireplace installation.
REQUORED HARDWARE IN THIS STEP
NO. DESCRIPTION SKETCH QTY
AA SCREW (4*38MM) 4 PCS
BB WALL ANCHOR 4 PCS
STUD WALL
• Install the screws (AA) at marked stud locations.
DRYWALL
• Drill 5/16-inch holes at marked locations, then insert wall anchors (BB) into holes. Install the
screws (AA) to the wall.
STUD WALL DRYWALL
AA AA
BB
INSTALLATION - WALL MOUNTING
PAGE 11 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 5
Hang the fireplace to the wall as shown.
AA
A
AA
AA
A
A
STEP 6
Put the acrylic beads (E) into the fireplace (A) as shown.
INSTALLATION - WALL MOUNTING
PAGE 12 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 7
Complete!
Hang the glass cover (E) to the fireplace (A) by inserting the hooks into the slots located on the
top of the fireplace (A). Secure the glass cover (E) in place with screw (DD) as shown.
E
E
DD
DD
INSTALLATION - FREESTANDING
PAGE 13 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 1
Remove the glass cover (E) by unscrew four screws (DD) as shown.
DD
DD
E
STEP 2
Assemble the wind shield (D) to fireplace (A) th screw (DD) as shown.
REQUORED HARDWARE IN THIS STEP
NO. DESCRIPTION SKETCH QTY
DD SCREW (M4*8) 2 PCS
DD
D
A
INSTALLATION - FREESTANDING
PAGE 14 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 4
Put the acrylic beads (E) into the fireplace (A) as shown.
STEP 3
Assemble the left feet (B) & right feet (C) to fireplace (A) with screws (CC) as shown.
REQUORED HARDWARE IN THIS STEP
NO. DESCRIPTION SKETCH QTY
CC SCREW (M6*12) 4 PCS
B
A
CC
C
INSTALLATION - FREESTANDING
PAGE 15 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 5
Complete!
Hang the glass cover (E) to the fireplace (A) by inserting the hooks into the slots located on the
top of the fireplace (A). Secure the glass cover (E) in place with screw (DD) as shown.
E
E
DD
DD
OPERATING INSTRUCTION
PAGE 16 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
Power Button
Ƈ
Ƈ
Ƈ
Ƈ
Pressing the power button will turn ON or OFF the unit.
When the unit is in ON mode, the power icon indicator light will be shown green.
When the unit is in OFF mode, the power icon indicator light will be shown red. When power
OFF, unit will be stopped, if heater is working before power OFF the unit, fan will have 20
seconds delay to ensure heat will not be trapped inside the unit.
The unit has a memory function with last settings for heating level and flame brightness effect,
unless the main power to the unit has been interrupted.
ƇPress the flame color to cycle through the setting as: C1/C2/C3/C4/C5
Flame Color Button
Flame ColorSetting
C1
C2
C3
Yellow + Blue
Yellow Gradient +
Blue Gradient
Yellow
Ember Bed Color
Red + Blue
Red
Red
C4
C5
Yellow + Blue Gradient
Blue
Red Gradient + Blue
Gradient
Blue
Control
Panel
Display
Power
Flame Color
Temperature
Flame Brightness
Side Light
Child Lock
Timer
Remote Control
OPERATING INSTRUCTION
PAGE 17 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
Temperature Button
Ƈ
Ƈ
Ƈ
Ƈ
The temperature button controls the heater thermostat.
Press the temperature button to scroll through the pre-set temperature settings:
- Fahrenheit: OF (OFF), 65, 70, 75, 80, 85, 90 and HI (High).
- Celsius: OF (OFF), 18, 21, 24, 27, 29, 32 and HI (High).
Hold down the temperature button for 3 seconds to toggle between Fahrenheit and Celsius.
A small “F” or “C” will display next to the temperature.
When the ambient temperature is higher than the set temperature, heater will turn off
automatically.
Ƈ
Ƈ
The flame brightness button should be used to set the flame & ember bed brightness.
Press the flame brightness button to scroll through the flame brightness settings:
- F0 (Flame OFF) /F1/F2/F3/F4 (brightest).
Flame Brightness Button
Ƈ
Ƈ
The Side Light button should be used to set the color of the side light.
Press the side light button to scroll through the side light settings:
- 0/1/2/3/4.
Side Light Button
Ƈ
Ƈ
When the unit is ON, holding the POWER button for 10 seconds to activate the Child Lock
fuction. E3 will be displayed that indicate the Child Lock fuction acticate. All function keys
are lcoked. When pressing any button, E3 will be displayed that indicate the Child Lock
fuction acticate.
To inactivate the Child Lock function, holding the POWER button for 10 seconds.
Child Lock Button
Ƈ
Ƈ
Ƈ
Timer can be adjusted when heater is ON. It can adjusted from 0 hour (OFF) to 9 hours,
press the timer button to scroll through the timer settings, which are: 0.0, 0.5, 1.0, 2.0, 3.0,
4.0, 5.0, 6.0, 7.0, 8.0, 9.0.
When TIMER is activated, the symbol will be displayed.
When TIMER digital is 0 H, TIMER function is invalided. The TIMER symbol will
automatically disappear.
Timer Button
ƇFunctions are same as the touch control except Child Lock and Change the temperature unit.
Remote Control
Side Light ColorSetting
0
1
2
OFF
Red
Blue
3
4
Red + Blue
Red & Blue gradually changed
CARE AND MAINTANCE
PAGE 20 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
Ƈ
Ƈ
Ƈ
Ƈ
Make sure the unit is turned OFF, unplugged and the heating elements of heater are cool
whenever you are cleaning the heater.
Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or
household cleaners as these products will damage the metal trim.
The motors used on the fan and the flame generator assembly are pre-lubricated for
extended bearing life and require no further lubrication. However, periodic
cleaning/vacuuming of the fan/heater and air intake/output vents is recommended.
Any other servicing should be performed by an authorized service representative.
1.
2.
3.
4.
The battery compartment is located on the back of the remote control (F).
Press the small tab inward as you slide the battery door open and remove the old battery.
Insert a new CR2025 lithium battery (not included), ensuring the polarities of the battery
match the inside of the battery compartment.
Re-insert the battery door.
Ƈ
Ƈ
Ƈ
Ƈ
The batteries should be removed if the product is to be left unused for a long time.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbonzinc), or rechargeable (nicad, nimh, etc) batteries.
Non-rechargeable batteries are not to be recharged. Exhausted batteries are to be removed
from the product.
WARNING: Make sure the power is turned off before proceeding. Any electrical repairs or rewiring of
this unit should be carried out by a licensed electrician in accordance with national and local codes.
WARNING: If repairing or replacing and electrical component or wiring, the original wire routing, color
coding and securing locations must be followed.
WARNING: Electrical outlet wiring must comply with local building codes and other applicable
regulations to reduce the risk of fire, electrical shock and injury to persons.
WARNING: Do not use this fireplace if any part of it has been under water. Immediately call a qualified
service technician to inspect te fireplace and replace any part of the electrical system.
WARNING: Disconnect power before attempting any maintenance or cleaning to reduce the risk of
fire, electrical shock or personal injury.
WARNING: During any service of this appliance, the power to the unit must be turned off. First turn
the main power switch to the “OFF” position. Then remove the electrical plug from the wall outlet.
WARNING: When the heater is not in use, the heater should be stored in a dry location, away from
possible damage. The power cord should be stored properly to avoid contact with hot or sharp objects.
Replacing the Remote Control Battery
When the remote control (F) stops operating or its range seems reduced, it is time to replace
the batteries.
NOTE:
CARE AND MAINTANCE
PAGE 21 OF 22
TROUBLE SHOOTING GUIDE
SKU NO.: 810394426
ITEM NO.: CAL-174203A
Ƈ
Ƈ
Disposal of Used Battery
A battery may contain hazardous substances that could be endangering
to environment and human health.
This symbol marked on the battery and/or packaging indicates that used
battery shall not be treated as municipal waste. Instead it shall be left at
the appropriate collection point for recycling.
By ensuring the used battery is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health. The recycling of materials will help to conserve natural resources.
PROBLEM POSSIBLE CAUSE SOLUTION
1. No power, logs
do not glow.
1. The unit does not have power. 1a, Check that unit is plugged into a standard
120 volt outlet. Then make sure power is set
at “ON” position.
2. The overheat protection device
has been engaged.
2. Unplug unit, wait 5-10 minutes, then the
sensor will reset itself. Plug the unit back in
and turn on the heater. If the problem
persists, call customer service.
2. E1 displayed on
control panel.
3. Unplug unit, wait 5-10 minutes, then the
sensor will reset itself. Plug the unit back in
and turn on the heater. If the problem
persists, call customer service.
3. E2 displayed
on control panel.
3. The ambient temperature sensor
is broken or not working correctly.
4. E3 displayed
on control panel.
4. Child lock function activate. 4. To inactivate the Child Lock function,
holding the POWER button for 10 seconds.
5. Fan motor
continues to blow
after unit is
powered off.
5. Normal operation. 5. This is a standard feature; the blower runs
for an additional 20 seconds to ensure heat
will not be trapped inside the unit.
6. Normal
operation.
6. Power cord
gets warm to the
touch.
6. This is normal for a heater appliance as it
requires more current to operate. Check the
connections of the appliance cord and the
outlet. Make sure the plug fits tightly into the
outlet. During use, check the plug and outlet
frequently to determine if it is HOT; if so,
discontinue use of the appliance and consult
with a qualified electrician to check or change
the overheating outlet(s).
ONE YEAR LIMITED WARRANTY
PAGE 22 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
PLEASE DO NOT RETURN ANY PRODUCTS TO STORE, ANY MISSING PARTS OF HARDWARE OR
ASSEMBLY PROBLEMS, PLEASE CONTACT WITH OUR CUSTOMER SERVICE CENTER AT
888-829-1658. WORKING HOURS: MONDAY-FRIDAY, 9:00AM-5:00PM (PACIFIC STANDARD TIME)
Z>/E'dKE/Eh^dZ/^>/D/d;ŚĞƌĞŝŶĂŌĞƌƌĞĨĞƌƌĞĚƚŽĐŽůůĞĐƟǀĞůLJĂƐ͞ƚŚĞŽŵƉĂŶLJ͟ͿǁĂƌƌĂŶƚƐƚŚĂƚLJŽƵƌŶĞǁ
ůĞĐƚƌŝĐ&ŝƌĞƉůĂĐĞŝƐĨƌĞĞĨƌŽŵŵĂŶƵĨĂĐƚƵƌŝŶŐĂŶĚŵĂƚĞƌŝĂůƐĚĞĨĞĐƚƐĨŽƌĂƉĞƌŝŽĚŽĨŽŶĞ;ϭͿLJĞĂƌĨƌŽŵĚĂƚĞŽĨ
ƉƵƌĐŚĂƐĞ͘^ƵďũĞĐƚƚŽƚŚĞĨŽůůŽǁŝŶŐĐŽŶĚŝƟŽŶƐĂŶĚůŝŵŝƚĂƟŽŶƐ͗
The electric fireplace must be installed and operated at all times in accordance with the
installation and operating instructions furnished with the product. Any unauthorized repair,
alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
This warranty is non-transferable, and is made to the original owner, provided that the purchase
was made through an authorized supplier of the Company.
The warranty is limited to the repair or replacement of part(s) found to be defective in material or
workmanship – provided that such part(s) have been subjected to normal conditions of use and
service – after said defect is confirmed by the Company’s inspection. All replacement parts or
products will be new, remanufactured, or refurbished.
The Company may, at its discretion, require that any defective part(s) be returned in exchange for
the replacement part(s).
The Company may, at its discretion, fully discharge all obligations with respect to this warranty by
refunding the wholesale price of the defective part(s).
This warranty does not cover the LED light bar included with the electric fireplace.
Any installation, labor, construction, transportation, or other related costs/expenses arising from
defective part(s), repair, replacement, or otherwise of same, will not be covered by this warranty,
nor shall the Company assume responsibility for the same.
The owner/user assumes all other risks – if any – including but not limited to the risk of any direct,
indirect or consequential loss or damage arising out of the use, or inability to use the product,
except as provided by law.
All other warranties – express or implied – with respect to the unit, its components and
accessories, or any obligations/liabilities on the part of the Company are hereby expressly
excluded.
The Company neither assumes, nor authorizes any third party to assume on its behalf, any other
liabilities with respect to the sale of the unit.
The warranties as outlined within this document do not apply to non-accessories used in
conjunction with the installation of this product.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
This warranty is void if:
(a) The fireplace is subjected to prolonged periods of dampness or condensation.
(b) Any unauthorized alteration, willful abuse, accident, or misuse of the product.
(c) You do not have the original purchase receipt.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.