South Pacific Electronics FMT-304 User Manual 46090

Download:
Mirror Download [FCC.gov]
Document ID	46090
Application ID	qHsRdBV+/b5oEnYFGykVlw==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.26kB (140790 bits)
Date Submitted	1999-07-06 00:00:00
Date Available	1999-08-03 00:00:00
Creation Date	2001-06-11 12:56:48
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-06-11 12:56:52
Document Title	46090.pdf
Document Author:	jsoscia

7—305/06/(Fm
Testing the Future
LABORATORIES INC.
EXHIBIT E
SYSTEM MANUAL
5473A CLOUDS REST - MARIPOSA‘ CALIFORNIA 95338 ' (209) 966-5240 - FAX (209) 96644257
ObkoA/Tijay
FMT-304 OPERATING MANUAL
27MHZ 4-CHANNEL REMOTE CONTROL DIGITAL TRANSMITTER
The hand controller, FMT-304 is part of a four-channel remote control system. A few of its
applications could be as:
u a calling device for the elderly or handicapped.
0 a personal security alarm activator for home safety or cash
carrying businesses eg. banks, shops service stations, etc.
0 a remote control switching device for garage doors, lights,
gates, and automatic telephone dialer.
It is housed in an attractive, high impact resistant grey ABS
plastic case.
Pressing the designated switch on the front positively activates
the controller. Activation is confirmed by the sound of its built-in
buzzer.
The battery service life approximates its shelf life. 9-Volt Carbon or Alkaline type batteries may be
used. Depending on the battery type, shelf life ranges between 1 and 2 years. While the FMT-304 is
not transmitting it uses no power. It will operate on as low a 4 Volts DC, however, in such cases the
power and range will be reduced.
The highest possible standard of performance is achieved by employing a crystal-controlled, frequency
modulated radio signal operating in the 27MHz band. This is enhanced by a specially dedicated
custom-built integrated circuit. The latest ”state of the art" surface-mount technology (SMD) provides
maximum reliability.
A lO-way code switch (part of the digital encoding system) is used. This enables the user to select any
one of the 1024 available codes and thus ensure highest security against false operations. Code switch
eleven and twelve is addressed by the four channels. The four channels are binary encoded on code
switch eleven and twelve. This is displayed on the back of the battery cover of the EMT-304. The code
can be readily changed at any time.
The maximum operating distance (in conjunction with our FMR series receivers) will average between
100 and 180 metres. The operating distance may depend upon the structure of the building in which
it’s used. When operating near its range limit, some improvements may be obtained by pointing the
controller towards the receiver. This is due to its slightly directional properties.
In Australia, a licence issued under the "Wireless Telegraphy Act and Regulations" is not required for
the operation of this transmitter.
The housing of the controller has been designed to accept Elsema’s leather pockets.
The controller is also available without its front membrane label. to enable the fitting of customers
own designed label.
fi/‘fX/Fflfifiofl
REGULATORY COMPIANCE STAEMENTS
American Users
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause hamiful interference and
(2) This device must accept any interference received. including interference that may cause undesired
operation.
FCC Notice
This device has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable promotion against
hamrful interference in a residential installation. This device generates, uses, and can radiate radio
frequency energy and, if installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this device does cause harmful interference to radio or television
reception, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the computer and receiver.
0 Connect the computer into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the grantee of this device could void
the user‘s authority to operate the equipment.
Canadian Users
This Class [B] digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique cle la classe [B] respecte toutes les exigences du Reglement sur le materiel
brouilleur du Canada
European Users
This information Technology Equipment has been tested and found to comply with the following
European directives:
- ETS 300 683
- I-ETS 300 220
Australian and New Zealand Users
This device has been tested and found to comply with the limits for a Class [B] digital device, pursuant
to the Australian/New Zealand standard AS 4268.2 (1995) set out by the Spectrum Management
Agency.
TECHNICAL DATA ON EMT—304
POWER SOURCE :
SUPPLY VOLTAGE :
CURRENT CONSUMPTION :
OPERATING FREQUENCY :
CARRIER FREQUENCY TOLERANCE :
RADIATED R.F. POWER OUTPUT :
ANTENNA :
TYPE OF EMISSION:
FREQUENCY DEVIATION :
TYPE OF MODULATION :
SPURIOUS TRANSMISSION :
NECESSARY BAND WIDTH :
DIGITAL CODING SYSTEM :
DIMENSION :
WEIGHT :
USEABLE OPERATING RANGE :
COMPATIBLE RECEIVERS :
oldie/44753”
9-Volt Battery
Carbon : approximately 1—year shelf life. (6F22)
Alkaline: approximately 2-year shelf life.
6 to 16 VDC (For constant RF-Output.)
35mA (Typical) at 8VDC supply (only when
transmitting)
27.145MHz (other frequencies available on 27.045,
27.195 and 27.455 MHz).
Crystal controlled 30 parts per million (0 to 50° C).
Refer to CKC tests.
Built in 50mm proprietary DILEC rod.
Narrow-bandwidth Frequency Modulation (FID)
1600 Hz non-retum to zero (+-20%).
Manchester format 1.08 ms per bit (15% tolerance).
Complies with FCC 15.227(USA), MPT 1346 pt 4.5
(UK) and ETS 300 220 (Europe).
+ - 50 KHz
On board 10-way coding switch (1024 channels).
The 4 buttons control code switch 11 and 12.
For example :
Button "1" is: code—11 “on” and code—I2 "on"
Button "2" is: code—ll "off' and code-I2 "on"
Button "3" is: code-11 ”on" and code-12 "off"
Button "4" is: code-ll "of " and code-12 “off".
95 X 55 X 20 mm
72g excluding battery
Up to 250 metres depending on building structure.
All Elsema type FMR—... series.
Due to its popularity, ELSEMA PTY. LTD stocks the Carbon Battery 6F22. The indicated shelf life is
only approximated and can vary greatly depending on the freshness and type of brand used,
fiflf/F/ffiM
FMT-304 BLOCK DIAGRAM
9V Battery
Ch.1 Ch.2 Ch.3 Ch.4
. ' Dilec rod
ERIC "3 88.88KHz
RC OSc Antenna
Encoder 5
Antenna
Matching
27.145MHZ
12-way Codeswitch

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:06:11 12:56:48
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : jsoscia
Title                           : 46090.pdf
Modify Date                     : 2001:06:11 12:56:52-04:00
Page Count                      : 5

EXIF Metadata provided by EXIF.tools