South Pacific Electronics FOB433WP Keyring Remote Control User Manual fob43303wpx
South Pacific Electronics Ltd. Keyring Remote Control fob43303wpx
Users Manual
ELSEM A 433MHz Keyring Remote with Frequency Hopping – PentaFOB® Series FOB4 3 3 0 3 W P 433MHz PentaFOB® series Remotes with Frequency Hopping FEATURES 3-channel PentaFOB® remote Transmission on 5 different frequencies Uses frequency hopping spread spectrum (FHSS) One of the most secure remote controls on the market Competitive pricing APPLICATIONS Keyless access control for automatic gates and roller doors Warehouse automation i.e. Roller doors, Cooler room doors.…. and anywhere else you need a wireless signal to transmit a contact closure DESCRIPTION The PentaFOB® uses frequency hopping spread spectrum (FHSS), making it impossible for the remote to be interfered with or jammed. The keyring retainer is moulded as part of the chassis making for a super sturdy keyring mount. The PentaFOB® series is an extremely versatile remote control that can be customized through a range of configurations and colours to suit your needs. FREQUENCY HOPPING The PentaFOB® remotes use frequency hopping spread spectrum (FHSS). When a button is pressed, it simultaneously transmits the code on 5 different frequencies, making it impossible for the remote to be interfered with or jammed. This allows multiple transmitters to be used in close proximity with no interference or jamming. TECHNICAL DATA Operating Voltage CR2032 Battery Standby Current 1.8uA Current Consumption 18mA (typical) when transmitting Battery life 1.5 years with average use Frequencies 433.100 to 434.700MHz Operating range up to 120 metres depending on building structure and receiver antenna Operating Temperature Range -5 to 50°C Decoding System Encrypted 17 billion codes combinations Dimensions 72 x 43 x 16 mm Weight 40 grams ELSEM A 433MHz Keyring Remote with Frequency Hopping – PentaFOB® Series COMPATIBLE RECEIVERS Below is a list of compatible receivers for the PentaFOB® remotes. PCR43301RE 1-Channel Receiver with Relay Output. Enclosed in a case PCR43302P 2-Channel Plug in type Receiver with Open Collector Output PCR43302R 2-Channel Receiver with Relay Outputs PCR43302RE 2-Channel Receiver with Relay Outputs. Enclosed in a case PCR43301240RE PCR43301240R 1-Channel Receiver with 1-Channel Receiver 240VAC mains supply enclosed in an IP66 case PCR43302240R 2-Channel Receiver with 240VAC mains supply PCR43302240RE 2-Channel Receiver enclosed in an IP66 case PCR43304R PCR43304RE 4-Channel Receiver with 4-Channel Receiver Relay Outputs enclosed in an IP66 case PCR43305R 5-Channel Receiver with Relay Outputs PCR43305RE 5-Channel Receiver enclosed in an IP66 case ELSEM A 433MHz Keyring Remote with Frequency Hopping – PentaFOB® Series REGULATORY COMPLIANCE STATEMENTS American Users This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Notice This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the grantee of this device may void the user’s authority to operate the equipment. ELSEM A 433MHz Keyring Remote with Frequency Hopping – PentaFOB® Series PentaFOB® Programming Instructions Coding the PentaFOB® remotes and receivers can be done in 2 different ways. 1. Using the Receiver 2. Using another Remote Control Coding using the Receiver 1. 2. 3. 4. 5. Check that all switches are “OFF” on the receivers 12-way dip switch Press and hold the program button on the receiver Press the remote button for 2 seconds, receiver LED will flash and then turn Green Release the button on the receiver and the remote Press remote control button to test the receiver output Deleting Receivers Memory Short the Code Reset pins on the receiver for 10 seconds. This will delete all the remotes from the receiver’s memory.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Atinesh Create Date : 2018:02:19 15:18:37+11:00 Modify Date : 2018:03:14 11:06:31-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : Atinesh Title : Microsoft Word - fob43303wp.docx Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2018:03:14 11:06:31-07:00 Producer : Acrobat Distiller 18.0 (Windows) Document ID : uuid:1b2fa180-f5e8-4db9-8162-e1ac865fe7a2 Instance ID : uuid:4a0564c4-47d7-4ce6-b73f-4c611f83a2a6 Page Count : 4EXIF Metadata provided by EXIF.tools