Southern Telecom BWA003 Stereo Bluetooth Headset User Manual SH712 x

Southern Telecom Inc. Stereo Bluetooth Headset SH712 x

User manual

Download: Southern Telecom BWA003 Stereo Bluetooth Headset User Manual SH712  x
Mirror Download [FCC.gov]Southern Telecom BWA003 Stereo Bluetooth Headset User Manual SH712  x
Document ID2538206
Application IDyZqQ/sHcAFxz7D+qDeJvWQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize23.41kB (292672 bits)
Date Submitted2015-02-18 00:00:00
Date Available2015-02-18 00:00:00
Creation Date2015-02-11 14:33:49
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2015-02-11 14:40:02
Document TitleMicrosoft Word - SH712 user manual_.docx
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

BWA15AA003
Bluetooth® Headset
User manual
-1-
1. Notice Before Using
Thank you for purchasing the Bluetooth® Headset BWA15AA003. Please read this
User's Manual completely before you use the Headset.
BWA15AA003 designed for listening the high quality music wirelessly that based on
the latest Bluetooth® wireless technology, it is built‐in MP3, AAC and apt‐X low
latency codec for high quality audio streaming. BWA15AA003 can be easily
connected to a mobile phone for call conversation and music listening, it is also
capable to connect to the other Bluetooth®‐enabled devices like Notebook, iPod
etc.
BWA15AA003 is compliant with Bluetooth V3.0 specification, supports HSP, HFP,
A2DP and AVRCP profiles. Please make sure your phone or other device supports
these profiles.
2. Specification
Bluetooth specification: V3.0
Operation frequency: 2.402‐2.48GHz
Supported profile: HSP, HFP, A2DP,AVRCP
Operation range: Up to 10 meters
Talk time: 7 hours
Play time: 6 hours
Standby time: 140 hours
Battery type: 120mAh, 3.7V, Polymer Li‐ion Battery
Charge time:2 Hours
-2-
3. Package Contents List
Please inspect this package and refer to the package contents list below to verify all
items were included in this package:
1)
BWA15AA003 Bluetooth® headset(1)
2)
USB Charging Cable(1)
3)
User's Manual(1)
4)
AUX Cable
4. BWA15AA003 Bluetooth® Headset Overview
① Answer
② Indicator LED
③ Next Track / Volume +
④ Previous Track / Volume –
⑤ Charging Port
⑥ AUX IN port
⑦ Microphone
5. Battery information
The device is equipped with an integrated lithium‐polymer battery. The battery
-3-
cannot be replaced. Do not attempt to remove the battery from the device since it
would damage the device. The full performance of a new battery is not achieved
until after two or three complete charging‐discharging cycles. The battery can be
charged and discharged several hundred times, but it loses its capacity over time.
Disconnect the BWA15AA003 from the power supply as soon as the battery is fully
charged, overcharging would reduce the service life of the battery. A charged
battery will lose its capacity if it is not used on a regular basis.
Important:
Ensure that the battery is fully charged if you do not use the device for a long period
of time. To avoid a complete discharge of the battery, the BWA15AA003 should be
charged at least every 6 months.
6. Charging the battery
The BWA15AA003 is operated with a rechargeable battery. Charge the battery
completely before its first use. Read the section "Battery information" before
starting the charging process.
1)
Connect USB cable to a general USB power supplier.
2)
Connect the charger to the correct outlet.
3)
When the charger is connected to the headset, the red indicator light will
turn on. Charging the battery fully may take up to 2 hours.
4)
When the battery is fully charged, the red indicator light will turn blue.
Disconnect the charger from the headset and the outlet. The headset is
ready to use.
-4-
NOTE:
‐ For first time use, please charge the headset fully.
‐ The fully charged battery has power for up to 5 hours of talk‐time and 4hours
music playing time, and up to 240 hours of standby time. However, the talk and
standby times may vary when used with different mobile phones or other
compatible Bluetooth® devices, usage settings, usage styles, and environments.
When the battery power is low, the headset will remind you by voice prompt
"Battery low" every 20 seconds, and the red indicator light starts to flash.
‐ For using the BWA15AA003 with iPhone, an additional battery meter feature will
be activated and the remaining battery capacity will display on your phone.
7. Pair to your Bluetooth® phone
Before you use your headset the first time, you must pair the unit with a Bluetooth®
-5-
enabled mobile phone. Pairing is a one‐time process and required only for the first
connection with the Mobile phone. The BWA15AA003 can be connected with two
mobile phones simultaneously.
1)
2)
3)
4)
5)
Keep the BWA15AA003 within 1 meter range of a Bluetooth®‐ready Mobile
phone.
Press and hold the ANSWER button for about 4 s, the indicator light will
flashes red and blue intermittently, the device is now in pairing mode.
Find the Bluetooth® setting of your Mobile phone and start the search for
Bluetooth® devices. (For further details, please read the operating
instructions of your Mobile phone).
From the list of devices found, select the "BWA15AA003".
If required, enter the PIN code "0000" and confirm the entry. Once the
pairing process was successful, the BWA15AA003 will connect to Mobile
phone automatically then switch to standby mode, the indicator will flash
blue every 5 seconds.
Note:
1)
2)
If pairing is not completed within 2 minutes, the headset will turn off. If this
happens, please repeat the pairing steps.
The BWA15AA003 supports Multi‐connection that allows for the
simultaneous use of the BWA15AA003 with two mobile phones. After paring
successfully with 2 mobile phones, switch off the headset and switch on
again, the headset will connect to both 2 mobile phones automatically.
-6-
Otherwise, you can connect the headset on the cellphone manually.
8. Turning headset on /off
Turn on your headset
Slide the ANSWER button to On to turn on your headset. If your headset has
completed the pairing process successfully, when the headset is turned on, it will
connect to the phone you last connected automatically. Please ensure your phone's
Bluetooth® function is active.
Turn off the headset
Slide the ANSWER button to Off to turn off the headset.
Note:
To conserve power, if the headset is not connected to a device for approximately 10
minutes, the headset will turn off automatically.
9. Using for music play
Play/Pause
Press ANSWER button to get the music play or pause.
Next/Previous song
Push and hold toggle switch to track the song to next or previous.
Increase/Decrease volume
Push toggle switch to increase or decrease volume.
-7-
Note:
The BWA15AA003 supports A2DP profile that allows stereo music streaming from a
Bluetooth phone. The music will pause automatically while a call is dialed
out/incoming, and resume when the call conversation has ended.
10. Using for phone call
Last number re‐dialing
At standby status, double press the ANSWER, the last number you dialed will be
re‐dialed.
Note: the last number re‐dialing is available only for the first device if two Mobile
phones are connected. The connection sequence can be determined by reconnect
manually.
Answering a call
Press ANSWER button shortly to answer the incoming call.
Reject an incoming call
Press and hold ANSWER button for 2 seconds to reject the incoming call.
Transferring a call
Press and hold Volume (+) for 2 seconds to transfer the call between the phone and
headset.
Ending a call
Press the ANSWER button shortly to end a call.
Call‐waiting
-8-
‐ If there is an incoming call while a call is in progress, press ANSWER button shortly
to accept the waiting call and end current calling.
‐ If there is an incoming call while a call is in progress, press and hold ANSWER
button for 2 seconds to accept the incoming call and place the current call on hold.
Note:The same operation could be performed in case of Multi‐connection.
Volume adjusting
Push toggle switch to increase or decrease volume.
Mute
While a call is in progress, Push toggle switch for 2s to mute the headset, a
remindful tone would be heard every 10 seconds. Repeat the operation to un‐mute.
11. Safety and general information
1)
2)
3)
4)
5)
Please read this User's Manual carefully and follow all instructions.
To avoid any damage or malfunction of the device do not drop the device
from high places.
Keep device away from humidity, water and any other liquid. If the device is
exposed to water, moisture and other liquids do not operate it to avoid any
electrical shock, explosion and damage to the device or yourself.
Do not place or keep this device near any heat sources, such as, direct
sunlight, radiators, stoves or other apparatus that produce heat. This may
cause an explosion, degrade the performance and/or reduce battery life.
Do not modify, repair or disassemble device (Especially the battery). Doing
this will void the warranty.
-9-
6)
7)
8)
9)
Do not place heavy objects on the device.
Use only the supplied and approved chargers.
Unplug this device when unused for long periods of time or during lightening
storms.
The battery used in this device may present a risk of fire or chemical burn if
mistreated.
10)
12. FCC Statement
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note:
Changes or modifications not expressly approved by the party responsible for compl
iance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B di
gital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provi
de reasonable protection against harmful interference in a residential installation. T
his equipment generates uses and can radiate radio frequency energy and, if not ins
talled and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference t
- 10 -
o radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
13. EC Declaration of Conformity
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: The manufacturer is not responsible for ANY interference, for example RADIO
or TV interference, caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to operate the equipment. This
product is CE certified according to the provision of the R&TTE Directive (99/5/EC).
This declares that this product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. Please note that this product uses
radio frequency bands not harmonized within EU.
Within the EU this product is intended to be used in Austria, Belgium, Denmark,
Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands,
Portugal, Spain, Sweden, and United Kingdom and within EFTA in Iceland, Norway
- 11 -
and Switzerland.
14. Warranty
The condition of this warranty and supplier's responsibilities under this warranty are
as follows:
Warranty is non‐transferable and is limited to the original purchaser only.
‐ You must be able to prove the date of original purchase of the unit with a dated
receipt.
‐ The warranty is not applicable if the product has been subject to physical abuse,
improper installation, modification or repair by an unauthorized third party.
‐ Supplier's responsibility shall be limited to the repair or replacement of the
product at its sole discretion.
‐ Specifically exempt from any warranty are limited‐life consumable components
subject to normal wear and tear such as batteries, decorates and other accessories.
‐ Supplier is not responsible, for failure resulting from accident, abuse, misuse, or
any unauthorized repair, or modification.
‐ Modification and repair of the unit should be done by an authorized and qualified
service center or returned to the manufacturer.
‐ This warranty gives you specific legal rights, and you may also have other rights,
which vary under local laws.
- 12 -

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:02:11 14:40:02+08:00
Create Date                     : 2015:02:11 14:33:49+08:00
Metadata Date                   : 2015:02:11 14:40:02+08:00
Format                          : application/pdf
Title                           : Microsoft Word - SH712 user manual_.docx
Creator                         : Administrator
Document ID                     : uuid:532752d5-854c-47ad-ba14-d76982d36aa6
Instance ID                     : uuid:d3c50c3b-0022-4ebc-97fc-846be51bccc7
Page Count                      : 12
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ABV4-BWA003

Navigation menu