Southwestern Bell Fm2552 Fm2000 Users Manual IB 3035K New
FM2552FM2000 to the manual 90c5e728-0cac-bf44-9503-164e9ff410e5
2015-02-06
: Southwestern-Bell Southwestern-Bell-Fm2552-Fm2000-Users-Manual-528048 southwestern-bell-fm2552-fm2000-users-manual-528048 southwestern-bell pdf
Open the PDF directly: View PDF .
Page Count: 13
![](asset-1.png)
STOP - DON'T TAKE ME BACK TO THE STORE.
LOOK - FOR THE TOLL-FREE "HELP" TELEPHONE NUMBER.
LISTEN - AS THE EXPERTS TALK YOU THROUGH THE PROBLEM.
For immediate answers to your questions regarding operation,
missing parts or installation, call:
Southwestern Bell Freedom Phone
Retail Sales Help Line at
1-800-366-0937
Monday - Friday 8:30 a.m. - 9:00 p.m. (EST)
Saturday 8:30 a.m. - 12:30 p.m. (EST)
http: // www. swbfreedomphone. com
SOUTHWESTERN BELL FREEDOM PHONE
7475 N. GLEN HARBOR BLVD., GLENDALE, AZ 85307
FM2552/FM2000 Printed in China
R
IB-3035KIB-3035K
Southwestern Bell
®
Caller ID Telephone
with 13-Memory Dialing
Toll Free Helpline
1-800-366-0937
http: // www. swbfreedomphone. com
FM2552/FM2000 OWNER'S MANUAL
Redail Erase Review
New Call
Southwestern Bell
Caller ID
![](asset-2.png)
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY
TO PERSONS, INCLUDING THE FOLLOWING:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall telephone jack and power
outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water, for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool.
5. Do not place this product on an unstable cart, stand or table.
The product may fall, causing serious damage to the product.
6. Slots or openings in the cabinet and the bottom are provided
for ventilation, to protect it from overheating. These openings
must not be blocked or covered. The openings should never
be blocked by placing the product on a bed, or other similar
surface. This product should never be placed near or over a
radiator or heat register.
7. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your dealer or
local power company.
8. Do not allow anything to rest on the power cord. Do not
place this product where the cord will be abused by persons
stepping on it.
9. Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Never spill liquid of any kind
on the product.
10. Never push objects of any kind into this product through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in fire or electric shock.
1 2
IMPORTANT SAFETY INSTRUCTIONS
11. To reduce the risk of electric shock, do not disassemble this
product but take it to a qualified serviceman when some
service or repair work is required. Opening or removing
covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock when the
appliance is subsequently used.
12. Unplug this product from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions because improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to normal operation.
e. If the product has been dropped or the cabinet has been
damaged.
f. If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than a cordless type) during
an electrical storm. There may be a remote risk of electric
shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity
of the leak.
SAVE THESE INSTRUCTIONS
![](asset-3.png)
3
Southwestern Bell
Southwestern Bell
FLASH
M1 M2 M3
MEMORY
MUTE
STORE
REDIAL
RESET
Location of Telephone Controls
RECEIVER
VOLUME
CONTROL
MEMORY
BUTTON
MUTE
BUTTON
REDIAL
BUTTON
RINGER
OFF/LO/HI
SWITCH (ON
BOTTOM OF
BASE)
KEYPAD
STORE
BUTTON
FLASH
BUTTON
RESET
BUTTON
CONGRATULATIONS!
You have purchased a 13 MEMORY CALLER ID TELEPHONE
manufactured to the highest standards of Southwestern Bell Freedom
®
Phone . Before installing and operating, be sure to read this
Owner's Manual.
4
Safety Instructions for Batteries
CAUTION
TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS,
READ AND FOLLOW THESE INSTRUCTIONS.
1. Use only the size and type of batteries mentioned in the Owner's
Manual.
2. Do not dispose of the batteries in a fire. The cells may explode.
Check with local codes for possible special disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be toxic if
swallowed.
4. Exercise care in handling batteries in order not to short the batteries
with conducting materials such as rings, bracelets, and keys. The
batteries or conductors may overheat and cause burns.
5. Do not attempt to recharge the batteries identified for use with this
product. The batteries may leak corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the batteries identified for use with this
product by heating it. Sudden release of the battery electrolyte may
occur causing burns or irritation to eyes or skin.
7. When replacing batteries, all batteries should be replaced at the
same time. Mixing fresh and discharged batteries could increase
internal cell pressure and rupture the discharged batteries.
8. When inserting batteries into this product, the proper polarity or
direction must be observed. Reverse insertion of the batteries can
cause charging, and that may result in leakage or explosion.
9. Remove the batteries form this product if the product will not be
used for a long period of time (several months or more) since during
this time the batteries could leak in the product.
10. Discard "dead" batteries as soon as possible since "dead" batteries
are more likely to leak in a product.
11. Do not store this product, or the batteries identified for use with
this product, in high-temperature areas. Batteries that are stored in a
freezer or refrigerator for the purpose of extending shelf life should be
protected from condensation during storage and defrosting. Batteries
should be stabilized at room temperature prior to use after cold
storage.
![](asset-4.png)
Redial Erase Review
New Call
Southwestern Bell
Caller ID
BASE
HOOK SWITCH
BATTERY
COMPARTMENT
COIL CORD
ERASE
BUTTON
REDIAL BUTTON
LCD DISPLAY
NEW CALL
LED
REVIEW
BUTTON
Location of Caller ID Controls General Information
UNPACKING
This package contains:
• FM2552/FM2000 Telephone with Caller ID
• Owner's Manual
• One (1) Fully Modular Coil Cord
• One (1) Fully Modular Telephone Line Cord (Long Straight Cord)
• One (1) Fully Modular Telephone Line Cord (Short Straight Cord)
• One (1) Quick Installation Guide
• Warranty Card (Part of Owner's Manual)
If anything is missing or damaged, contact the place of purchase.
Keep the packaging to transport the telephone.
5 6
![](asset-5.png)
INSTALLATION
FOLLOW THESE PRECAUTIONS BEFORE
INSTALLATION:
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack
is specifically designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected at the network
interface.
4. Use caution when installing or modifying telephone lines.
To Install Batteries
a. Open the battery door with a ball-point pen.
NOTE: You must install the batteries
BEFORE connecting the telephone to
the wall jack. If no batteries are
stalled, the Caller ID function of the
phone will not work.
b. Insert three AA alkaline batteries.
Make sure to install the batteries using the correct polarity(i.e. the "+"
symbol on the battery alligns with the "+" symbol on the unit). "SET
LANGUAGE" will appear on the display screen. This message will
remain on the screen until you install the telephone and then follow
the complete Caller ID set-up procedure.
c. Replace the battery door.
HANGING THE PHONE ON THE WALL
When the FM2552/FM2000 is wall-mounted, the HANDSET GUIDE
holds the HANDSET in place in the CRADLE.
ON A WALL PHONE PLATE:
a. Plug the short telephone line cord into
the jack in the Base bottom and into the
jack on the plate.
b. Hang the BASE on the two pins and
push the BASE down to lock it on.
c. Plug the COIL CORD into the
HANDSET and BASE jacks.
ON THE WALL WITHOUT A PLATE:
a. Install 2 screws with anchors into the
wall, one above the other, 3-1/4" apart,
extending 3/16" out from the wall, to
hold the base securely.
b. Install the long telephone line cord into
the jack in the BASE, thread it through
the groove and plug it into the modular
wall jack as shown.
c. Hang the base on the screws and pull it
down to lock it on.
d. Plug the COIL CORD into the
HANDSET and BASE jacks.
7 8
USING THE PHONE ON A DESK
a. Plug the long telephone line cord into the jack in the bottom of
the BASE, thread it through the groove toward the back of the
unit, then plug it into the modular wall jack.
b. Connect the COIL CORD to the jack in the HANDSET and the
BASE.
![](asset-6.png)
Setting Up Your FM2552/FM2000
When setting the FM2552/FM2000 to receive Caller ID
information, THE HANDSET OF THE UNIT MUST BE IN THE
BASE (ON HOOK).
NOTE: Do not lift the handset until you are finished setting the
Caller ID information.
To Set Language
1. After installing the batteries
and COIL CORD, all LCD
segments will light up and
the display will show:
2. Press the REVIEW " or
" Arrow to select
language. The display will
show:
3. Press the "ERASE" key to
confirm the displayed language. The unit will proceed to the area
code setup.
To Set Area Code
NOTE: In order for the Caller ID Redial feature to work
properly, you must set your local area code.
1. Press " or " Button to enter the correct first digit of your
local area code. Press the "ERASE" Button to move to the next
digit.
2. Repeat step 1 for the
programming of the second
and third digits of your local
area code.
3. Press the "ERASE" key to confirm the set area code. The unit will
proceed to the contrast level setup.
To Set Contrast Level
1. Press the " or " Button
to adjust the display contrast
to a darker or lighter level.
"
"
""
""
9
Setting Up Your FM2552/FM2000
Note: 1. When the low battery indicator is
displayed, disconnect all connections to
your FM2552/FM2000 and replace the
batteries.
2. To set up your FM2552/FM2000 again,
press the Caller ID "REDIAL" Button for
2 seconds in Date/Time screen when the
handset is on the cradle.
3. If you try to use the telephone before finishing the Caller ID set up,
or if you pause more than 40 seconds during any of the above steps,
the display will show "SET LANGUAGE" to remind you to finish
this sequence.
4. When the unit is in the standby mode (i.e. not displaying Caller ID
information), the current time will display in the middle of the screen.
In the situations when the Caller ID information is display, the
current time will be shown in a smaller size on top line.
REDIAL ERASE REVIEW
AM
10
2. Press the "ERASE" key to
confirm the set contrast level.
3. The display will show the
default Time/Date (12:00am
1/01). The time and date will
automatically be updated as
incoming Caller ID calls are
received.
![](asset-7.png)
Telephone Operation
Receiving a Call
1. When you hear your phone ring, lift the HANDSET.
After the second ring, the caller's name and telephone number will
display on the LCD if you have CID service. The NEW CALL LED
and the NEW CALL ICON will flash.
The caller ID information will be stored in the order received.
FLASH (CALL WAIT)* BUTTON
Allows you to access the Call Waiting service from your local
telephone company* or access a new dial tone.
*Requires special service from your local telephone company.
RINGER OFF/LO/HI SWITCH
When you don't want to be disturbed, set the switch (on bottom of
base) to "OFF". You can still make outgoing calls. When you feel the
ringer is too loud, set the switch to "LO".
2. At the end of your call, return the HANDSET to the CRADLE
NOTE: 1. If you pick up the telephone before the second ring is
completed, the Caller ID information may not display properly.
2. The information will be displayed on the LCD for 20 seconds.
3. If the received call information is the same as any of the new calls,
the unit displays "REPEAT" icon to indicate a REPEAT CALL.
Telephone Features
11 12
Telephone Features
LIGHTED KEYPAD
For better visibility when dialing in a dim light, a lighted dial pad is
provided.
RECEIVER VOLUME CONTROL
The RECEIVER VOLUME CONTROL is located on the side of your
handset. This control allows you to adjust your handset volume from
normal to high for a more comfortable listening level.
PAUSE
Whether you have Tone or Pulse service, you can insert a 4-second
PAUSE into the dialing or storing of a number into memory in order
to access custom and telebanking services, long distance, etc. Press
the PAUSE (REDIAL) button at the desired point in the number.
Press PAUSE (REDIAL) again if an additional 4 seconds is needed.
REDIAL BUTTON
Automatically redials last number called (up to 32 digits). If the
number was busy or unanswered:
a. Lift the HANDSET.
b. Press the REDIAL Button (on the keypad side of the handset).
MUTE BUTTON
Prevent another party on the phone from hearing your personal
discussion .
Press and hold the MUTE Button as long as you want this feature
activated.
RESET BUTTON
At the end of a call, you can make your next call without replacing the
HANDSET in the cradle. Press and hold RESET to disconnect the
telephone.
HEARING AID COMPATIBILITY
The FM2552/FM2000 is compatible with inductively coupled hearing
aids.
CALL TIMER
The call timer will appear on the display for you to track the
conversation time. It will disappear once you hang up.
Dialing a Call
1. Lift the HANDSET.
2. When you hear a dial tone, dial the number. The LCD display will
show the dialed number and the time that had elapsed during the call.
PM
NEW CALL PM
![](asset-8.png)
PM
PM
PM
Memory Dialing
6. To continue programming priority numbers, repeat steps 2
through 5. To end programming numbers, return the HANDSET
to the CRADLE.
If you wish to enter a 4-second Pause in the number you are storing,
press the REDIAL Button at the desired point in the number.
To Program Frequently Called Numbers:
1. Lift the handset. You will hear a dial tone.
2. Press the STORE Button.
3. Dial the phone number you wish to store (16
digits maximum). The LCD will show the
number you dialed.
4. Press the STORE Button again.
5. Press one of the 10 memory location buttons 0-9. Your number is
now stored in the corresponding location. The LCD will show the
memory location.
Memory Dialing
Your FM2552/FM2000 is equipped with 13 memories (three priority,
ten two touch) for programming your most frequently dialed
telephone numbers. You can store up to 16 digits in each priority key
(M1, M2, M3), or in each of the numeric keys 0 through 9 by
following the steps outlined. Numbers must be stored with the
handset lifted.
To Program Priority Keys:
1. Lift the handset.
You will hear a dial tone. Even if you hear an error message from
the telephone company, you may still continue these memory
programming steps.
2. Press the STORE Button. The LCD will
show:
3. Dial the phone number you wish to store
(16 digits maximum). The LCD will show
the number you dialed.
4. Press the STORE Button again.
5. Press M1, M2 or M3 Button.
The LCD will show:
8
0
9
#
2
5
3
6
1
4
7
*
8
0
9
#
2
5
3
6
1
4
7
*
STORE
STORE
STORE
STORE
M2 M3
M1
1413
PM
![](asset-9.png)
Memory Dialing
Reviewing New Call Records
NOTE: The handset must be in the base to review Caller ID
information.
6. To continue storing numbers, repeat steps 2 through 5. To end,
return the HANDSET to the CRADLE.
To Dial Priority Numbers:
1. Pick up Handset. You will hear a dial tone. Even if you hear an
error message from the telephone company, you may still continue
these memory programming steps
2. Press M1, M2 or M3.
3. Your call will automatically be dialed.
To Dial Frequently Called Numbers:
1. Pick up Handset.
2. Press MEMORY Button.
3. Press the desired memory location
Button (0-9).
4. Your call will automatically be dialed.
To Erase A Stored Number
To erase a stored number, simply store a new number in the same
location. The new number will replace the old one.
Caller ID Features
1. When the Time/Date screen is displayed, press the REVIEW " "or
" " Button, and the display will show the last new call information.
2. Continue pressing the REVIEW" " or " " Button to review all
new call information in the order the calls were received.
3. After the final call has been reviewed, the display will show "END
OF NEW CALL", and the NEW CALL LED will stop flashing.
M2 M3
M1
MEMORY
15 16
1. When the Time/Date screen is displayed, press the " " or " "
Button to select the Caller ID number that you want to dial.
2. Press and release the Caller ID "REDIAL" Button to dial your
desired local or long distance telephone number. The display will
show "PICKUP PHONE".
Caller ID Features
Reviewing Call Records Stored in Memory
NOTE: The handset must be in the base to review Caller ID
information.
1. When the Time/Date screen is displayed, press the REVIEW " " or
" " Button, and the display will show the calls stored in memory.
2. Continue pressing the REVIEW " " or " " Button to display all
call records in the order they were received, from the oldest to the
newest.
3. Continue to review all calls until "END" is displayed.
NOTE :In the Caller ID Review mode, if you want to review the
Caller ID quickly (about 5 records/second), press and HOLD the
REVIEW
Caller ID Redial
The FM2552 allows you to redial a Caller ID record you are
currently reviewing by simply pressing the Caller ID "REDIAL"
Button (on the back of the handset).
When the number is the full ten digit numbers, only the last seven
digits will be dialed if the area code is the same as the programmed
area code. If the area code is different, then the full ten digit number
is displayed and a "1" will automatically be added to the dialing
sequence. The local area code must be programmed in order to fully
utilize the redial feature.
NOTE: The handset must be in the base to review Caller ID
information.
" " or " " Button. The unit will then scroll through
The Caller ID records continuously.
/FM2000
![](asset-a.png)
17
Caller ID Features
3. When you lift the handset, "PICKUP PHONE" will clear and the
number will be automatically dialed.
With current Telecom redialing situations, there are 4 redial options:
(1) 7 digits without a 1 prefix; (2) 7 digits with a 1 prefix; (3) 10
digits without a 1 prefix; and (4) 10 digits with a 1 prefix.
1. 7 digits without a 1 : Assuming that you have programmed your
correct area code, redial your local call by pressing the "Redial"
Button once.
2. 7 digits with a 1 : Assuming that you have programmed your
correct area code, scroll to the local 7 digit call you wish to redial.
Press and hold the "Redial" Button for 2 seconds.
3. 10 digits without a 1 : Due to the software setup of the
the user is instructed to insert their 3 digit local area
code. In some areas of the country, one must include their area code
when making a local call. To solve this issue, the user must reprogram
their to another 3 digit "fictitious" area code. (We
recommend using an area code not currently being used in the U.S.,
i.e... 100 etc.) Once your area code is programmed as above, your
will show all "10 digits" for every incoming call.
To redial a local 10 digit call, press and hold the "Redial Button" for 2
seconds. The "1" prefix is then omitted and the local 10 digit call is
redialed out.
4. 10 digits with a 1 prefix: Simply scroll to the desired Long Distance
10 digit call you wish to dial out. Press down the redial button once
and release. If your area requires that you add 1 and your area code
even if the call is within the same area code, then you must reprogram
your to another 3 digit "fictitious" area code. The
"1" prefix will be added before the 10 digit number and your long
distance call will be dialed out.
FM2552/FM2000
FM2552/FM2000
FM2552/FM2000
FM2552/FM2000
18
PM
CALL
Caller ID Features
Erase All Calls
1. Press the " or " Button to review all Caller ID records
received before erasing all calls.
2. While the display is in standby mode, press and hold the "ERASE"
Button for 2 seconds.The LCD will show:
3. Press the "ERASE" Button again, then all VIEWED messages will
be erased .
""
NOTE:
In this condition, all the viewed messages will be erased. If there are
messages that have not been reviewed, the "Erase All Calls" function
cannot be performed.
New Call LED
The NEW CALL LED will flash to indicate a new call(s) has been
received. The NEW CALL LED and the NEW CALL ICON will
continue flashing until you review all new calls.
To Adjust The Display Contrast
When call information or the Time/Date screen is displayed, press and
hold the REVIEW " " and " " Button at the same time for 2
seconds. Press " " to make the contrast darker or " " to make the
contrast lighter. Press the ERASE Button to confirm the contrast.
![](asset-b.png)
20
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The display
screen is blank.
The battery needs to be
installed or replaced.
Adjust the contrast level. If
that doesn't work, replace
the 3AA alkaline batteries.
You cannot
redial a call
record.
Your local area code is not
programmed.
The number displayed is
incorrect.
"Error"
appears on
the display.
Cannot review
Caller ID data.
The unit is in the telephone
mode (not the Caller ID
mode), or the battery needs
to be installed or replace.
Bad data may have been
received.
If the display does not
indicate 7 digits, reprogram
the local area code.
Verify the number displayed
during redial. Data received
were possibly corrupted
during the transmission
through the telephone lines.
Dial the telephone number
manually on your
telephone.
The handset must be in the
base during all Caller ID
procedures. If that doesn't
work, replace the 3AA
alkaline batteries.
Pick up the phone after the
second ring. If an answering
machine is connected to the
same phone line as your
FM2552, it must be set to
answer after four or more
rings.
Trouble Shooting Guide
No dial tone. Improper installation. Recheck all modular plug
connections.
Problem with the wiring. Try another phone jack. If
your phone works on
another jack, it is likely you
have a problem with your
wiring. Contact your local
phone company.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The phone
does not ring.
Ringer Off/Lo/High switch
is not set correctly.
Set the ringer Off/Lo/High
switch to the Lo or High
position.
Too many telephones are
installed on the same line.
Contact your local telephone
company to determine the
maximum number of
extensions for your calling area.
The sound
volume is
too low.
Memory
dialing does
not work.
Another extension is
off hook.
The memory storage
procedure was not followed
correctly.
Hang up the extension.
Carefully review the store
sequence and re-enter your
programmed number.
Your
telephone
rings but the
FM2552
doesn't show
any messages.
The telephone line is not
connected properly to the
unit.
Connect the telephone line into
the back of the unit.
Check with your local
telephone company to be
sure Caller ID service is
being provided on your
telephone line.
19
![](asset-c.png)
21
FCC WANTS YOU TO KNOW
This equipment complies with Part 68 of the FCC rules. On the
bottom of the base of this equipment is a label that contains, among
other information, the FCC Registration Number and Ringer
Equivalence Number (REN) for this equipment. You must, upon
request, provide this information to your telephone company.
The REN is useful to determine the quantity of devices you may
connect to your telephone line and still have all of those devices ring
when your telephone number is called. In most, but not all areas, the
sum of the RENs of all devices connected to one line should not
exceed five (5.0). To be certain of the number of devices you may
connect to your line, as determined by the REN, you should contact
your local telephone company to determine the maximum REN for
your calling area.
If your telephone equipment causes harm to the telephone network,
the telephone company may discontinue your service temporarily. If
possible, they will notify you as soon as possible. You will be
informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities,
equipment, operations, or procedures that could affect the proper
functioning of your equipment. If they do, you will be notified in
advance to give you an opportunity to maintain uninterrupted
telephone service. If you experience trouble with this telephone
equipment the telephone company may ask that you disconnect this
equipment from the network until the problem has been corrected or
until you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the
telephone company. Connection to party lines is subject to state
tariffs. This equipment is hearing aid compatible.
SERVICE
According to FCC regulations, this equipment, which has been
certified and registered by the FCC, may only be repaired by
authorized persons. If repairs or adjustments are made by an
unauthorized person, the FCC certification may be voided. Should
you encounter any problems, please call the Southwestern Bell
®
Freedom Phone toll -free Customer Help Line for assistance:
1-800-366-0937, Monday - Friday 8:30 am - 9:00 pm, and Saturday
8:30 am - 12:30 pm. You can also visit our website at
http: // www. swbfreedomphone. com
FOR IN - WARRANTY SERVICE:
Package your complete unit (including all adapters, line cords, and
other accessories ) and ship the unit postage prepaid* and insured
(for your protection ) to: ®
SOUTHWESTERN BELL FREEDOM PHONE
DEPT.:Warranty Repair
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
Be sure to include your return address, proof of purchase, a daytime
phone number, $9.50 for postage and handling*, and a brief
explanation of your difficulties.
*NOTE: California residents need only provide proof of purchase
and should call 1-800-366-0937 for shipping instructions.
FOR OUT-OF WARRANTY SERVICE:
You may call our toll-free Help Line for the price of a replacement
before returning your unit. Please follow all instructions for In-
Warranty service (above) to return your unit, and mark the package:
DEPT.: Out-of-Warranty.
If you have called and know the cost of your replacement, please
include this information with your unit for prompt service.
QUESTIONS?
STOP...DON'T TAKE ME BACK TO THE STORE.
LOOK...FOR THE TOLL-FREE "HELP" TELEPHONE
NUMBER.
LISTEN...AS THE EXPERTS TALK YOU THROUGH THE
PROBLEM.
22
![](asset-d.png)
23 24
LIMITED WARRANTY
This warranty is also rendered invalid if this product is removed from
the country in which it was purchased, if it is used in a country in
which it is not registered for use, and/or if it is used in a country for
which it was not designed. Due to variations in telephone systems and
communications laws, this product may be illegal for use in some
®
countries. Southwestern Bell Freedom Phone Retail Sales assumes
no responsibility for damages or penalties incurred resulting from the
use of this product in a manner or location other than that which it is
intended.
This one-year limited warranty is in lieu of all other express
warranties, obligations, or liabilities. ANY IMPLIED
WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING
BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE
ONE-YEAR DURATION OF THIS WRITTEN LIMITED
WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH
OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER.
Some states do not allow the exclusion or limitation of special,
incidental, or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specific
legal rights, and you may also have rights which vary from state to
state.
SERVICE
For immediate answers to your questions regarding operation,
missing parts or installation, call the ®
SOUTHWESTERN BELL FREEDOM PHONE HELP LINE AT
1-800-366-0937
LIMITED WARRANTY
®
This Southwestern Bell Freedom Phone is warranted to the original
purchaser to be free from defects in materials and workmanship under
normal installation, use, and service for a period of one (1) year from
the date of purchase as shown on the purchaser's receipt.
®
The obligation of Southwestern Bell Freedom Phone Retail Sales
under this warranty shall be limited to repair or replacement (at our
option) during the warranty period of any part which proves defective
in material or workmanship under normal installation, use, and
service, provided the product is returned to Southwestern Bell
®
Freedom Phone Retail Sales TRANSPORTATION CHARGES
PREPAID (California residents call 1-800-366-0937 for shipping
instructions). Products returned to us or to an Authorized Service
Center must be accompanied by a copy of the purchase receipt. In the
absence of such purchase receipt, the warranty period shall be one (1)
year from the date of manufacture. To obtain service under this
warranty, return the defective product to the service center nearest you
together with your sales slip and $9.50 for postage and handling
(California residents need only provide proof of purchase). You may
also have other warranty rights which vary from state to state.
This warranty shall be invalid if the product is damaged as a result
of defacement, misuse, abuse, neglect, accident, destruction, or
alteration of the serial number, improper electrical voltages or
currents, repair alteration or maintenance by any person or party other
than our own service facility or an authorized Service Center, or any
use violative of instructions furnished by us.