Spalding M800001 Users Manual 211789
M800001 to the manual bd40fafd-f86e-0ab4-f5bc-7e5d1bf65794
2015-02-02
: Spalding Spalding-M800001-Users-Manual-447903 spalding-m800001-users-manual-447903 spalding pdf
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
REQUIRED TOOLS AND MATERIALS: A DIVISION OF RUSSELL CORPORATION • 2 People • Tape Measure Backboard and Rim Owners Manual Customer Service Center • N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A. • Step Ladder - 8ft. (2.4 m) • (2 each) Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets are Recommended). CAUTION: THIS BACKBOARD AND GOAL ARE NOT DESIGNED TO SUPPORT A PLAYER HANGING FROM THE GOAL OR NET. FAILURE TO OBSERVE THIS CAUTION MAY CAUSE BODILY INJURY AND / OR PROPERTY DAMAGE. 1/2" AND/OR 1/2" • Extension is Recommended. OPTIONAL TOOLS AND MATERIALS: WARNING! READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT. Write Model Number From Box Here: FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY. • Large and Small Adjustable Wrenches Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339, For Europe: 00 800 555 85234 (Sweden: 009 555 85234), For Australia: 1-800-632 7921 Internet Address: http://www.huffysports.com © COPYRIGHT 2005 by HUFFY SPORTS 1 05/05 ID# M800001 SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this system without following the instructions carefully. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this system is not installed, maintained, and operated properly. Check entire box and inside all packing material for parts and/or additional instructional material. Before beginning assembly, read the instructions and identify parts using the hardware identifier and parts list in this document. • Read and understand the warning label enclosed with hardware. It is the responsibility of the customer to mount this label. It should be affixed to the pole, wall, or door near playing area, at a height between 4-6 feet (1.22-1.83M) above ground level and in a location visible to all players. • During assembly, if using a ladder use extreme caution. Two people are recommended for this operation. • If technical assistance is required, contact Huffy Sports. • Serious injury could occur if teeth/face come in contact with backboard, net or rim. • Minimum operational height should be 6’6” (2M) to the bottom of backboard. Most injuries are caused by misuse and/or not following instructions. Use caution when using this system. For more information on assembly, placement, proper use and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. NOTICE TO ASSEMBLERS ALL Huffy Sports basketball systems, including those used for DISPLAYS, MUST be assembled and ballasted with sand or water according to instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift weight system. WARNING IMPORTANT! Remove all contents from boxes. Be sure to check inside pole sections; hardware and additional parts are packed inside. FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit. · See instruction manual for proper installation and maintenance. · Use caution when performing dunk type activities on this unit. · Do not hang from any part of unit, including backboard, support braces, rim or net. · Check unit before each use for loose hardware, excessive wear and signs of corrosion and repair before using. · During play, use extreme caution to keep player's face away from the backboard, rim or net. Serious injury could occur if teeth/face come in contact with backboard, rim or net. · During play, do not wear jewelry (rings, watches, necklaces, etc.) Objects may entangle in net. In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339 206118 5/97 In Australia: 1-800-632-792 WARRANTY CARD: Please remember to complete your product registration form either on-line at: www.huffysports.com/warrantycard or mail-in the enclosed postcard. ID# M800001 05/05 2 PARTS LIST - See Hardware Identifier Item Qty. Part No. 1 2 3 4 5 6 7 8 1 4 2 6 6* 1 1 1 206118 203113 203038 203309 203100 Description Warning Label Bolt, Hex Flange, 5/16-18 x 2.5 Long Bolt, Carriage, 5/16-18 x 2.75 Long Washer, 1” O.D. Nut, Hex Flange, 5/16-18 Rim Net Backboard * YOU MAY HAVE EXTRA PARTS WITH THIS MODEL. HARDWARE IDENTIFIER #2 (4) #6 (1) #7 (1) #3 (2) WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit. · See instruction manual for proper installation and maintenance. · Use caution when performing dunk type activities on this unit. · Do not hang from any part of unit, including backboard, support braces, rim or net. · Check unit before each use for loose hardware, excessive wear and signs of corrosion and repair before using. · During play, use extreme caution to keep player's face away from the backboard, rim or net. Serious injury could occur if teeth/face come in contact with backboard, rim or net. · During play, do not wear jewelry (rings, watches, necklaces, etc.) Objects may entangle in net. #5 (6)* In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339 206118 5/97 In Australia: 1-800-632-792 #8 (1) #1 (1) #4 (6) NOTE: BOARD STYLE MAY VARY 3 05/05 ID# M800001 ASSEMBLY INSTRUCTIONS WARNING: IT IS RECOMMENDED TO MOUNT BACKBOARD TO A SOLID (STEEL) SUPPORT. WARNING! WARNING! TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. WHEN MOUNTING THE BACKBOARD ASSEMBLY TO THE POLE IS PERFORMED AT AN ELEVATED HEIGHT. USE PROPER PRECAUTION. Mounting Options “A, B or C” 1. Attach rim (6) to backboard as shown. 1A. UNIVERSAL MOUNTING BRACKET INSTALLATION 3 8 Model 8406 Universal Mounting Bracket (NOT SUPPLIED) 3 2 4 6 5 4 5 5 ID# M800001 05/05 4 1B. EXTENSION ARM INSTALLATION 3 8 3 4 6 5 5 2 5 1C. ELEVATOR INSTALLATION 5 5 5 8 3 3 4 6 2 5 05/05 ID# M800001 2. Install net (7). 1. 2. 3. 4. 3. Place warning label (1) in location clearly visible within playing area. WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit. · See instruction manual for proper installation and maintenance. · Use caution when performing dunk type activities on this unit. · Do not hang from any part of unit, including backboard, support braces, rim or net. · Check unit before each use for loose hardware, excessive wear and signs of corrosion and repair before using. · During play, use extreme caution to keep player's face away from the backboard, rim or net. Serious injury could occur if teeth/face come in contact with backboard, rim or net. · During play, do not wear jewelry (rings, watches, necklaces, etc.) Objects may entangle in net. In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339 206118 5/97 In Australia: 1-800-632-792 10 ft. (3.05M) REGULATION RIM HEIGHT IS 10 FEET (3.05M). ID# M800001 05/05 6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 6 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:fcdfe91b-2625-4625-af77-54a629c1fd47 Producer : Acrobat Distiller 6.0.1 (Windows) Creator Tool : QuarkXPress(tm) 5.01 Modify Date : 2005:05:04 07:48:07-05:00 Create Date : 2005:05:04 07:48:07-05:00 Document ID : uuid:9d47f0c9-e86b-4571-8d49-bb58cd16ed01 Format : application/pdf Title : 211789.qxd Creator : QuarkXPress(tm) 5.01EXIF Metadata provided by EXIF.tools