SparkLAN Communications CAS633 802.11x module User Manual SPK 633 Manual

Download:
Mirror Download [FCC.gov]
Document ID	972684
Application ID	Bxw651O264TJLit4WL56JA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.39kB (92395 bits)
Date Submitted	2008-07-17 00:00:00
Date Available	2008-07-18 00:00:00
Creation Date	2008-07-10 11:21:46
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-07-14 18:17:17
Document Title	Microsoft Word - SPK-633 Manual.rtf
Document Creator	PScript5.dll Version 5.2
Document Author:	07388

SparkLAN: Wireless Card Installation
Manual SPK-633
Version 0.1
0-Introduction
The Ralink RT2561+ WLAN NIC is a complete wireless high speed Network Interface Card (NIC)
utilizing the Ralink RT2561+ chip set. It conforms to the IEEE 802.11g protocol and operates in the 2.45
GHz ISM frequency bands.It provides a complete reference design evaluation platform of hardware and
software to systemproviders or integrators requiring wireless data communications capability and is
ideal for integration into computer platforms.
Fully compliant with the IEEE 802.11g WLAN standards
FCC Certified Under Part 15 (pending) to Operate in the 2.45 Bands
Support for 54, 48, 36, 24, 18, 12, 9, and 6 Mbps OFDM, 11 and 5.5 Mbps CCK and legacy 2
and 1 Mbps data rates
Driver Supports Microsoft Windows ® 98/SE, ME, XP and 2000 (SR1)
1-SPK-633 Installation procedure
1.1 Installing the miniPCI card into the host PC Notebook
a-open miniPCI slot cover of host PC Notebook housing b-insert miniPCI card into miniPCI slot
c-connect the host PC notebook antennas to the miniPCI card antenna connectors (Hirose type UFL
connector) d-close miniPCI slot cover of host PC Notebook housing
1.2 Installing the software drivers
a-Start windows b-When windows detects new hardware and asks for drivers, point to directory where
the Ralink driver is located (for example floppy drive, cdrom , harddisk) to install. c-after drivers are
installed, restart windows
Preliminary SPK-633 installation manual
1.3 Wireless LAN installation guide lines and Authorization for use
Installation and use of this Wireless LAN device must be in strict accordance with the instructions
included in the user documentation provided with the product. Any changes or modifications made to
this device that are not expressly approved by Ralink may void the user’s authority to operate the
equipment. Ralink is not responsible for any radio or television interference caused by unauthorized
modification of this device, or the substitution or attachment of connecting cables and equipment other
than specified. It is the responsibility of the user to correct any interference caused by such
unauthorized modification, substitution or attachment. Ralink and its authorized resellers or distributors
will assume no liability for any damage or violation of government regulations arising from failing to
comply with these guidelines.
The use of Wireless LAN devices may be restricted in some situations or environments for example:
* On board of airplanes, or
* In an explosive environment, or
* In case the interference risk to other devices or services is perceived or identified as harmful.
In case the policy regarding the use of Wireless LAN devices in specific organizations or environments
(e.g. airports, hospitals, chemical/oil/gas industrial plants, private buildings etc.) is not clear, please
first verify authorization to use these devices prior to operating the equipment.
2-Regulatory information
2.1 FCC Information to User
This product does not contain any user serviceable components and is to be used with approved
antennas only. Any product changes or modifications will invalidate all applicable regulatory
certifications and approvals
2.2 FCC Guidelines for Human Exposure
Warning:
In order to comply with RF exposure limits established in the ANSI C95.1 standards, the user is
advised to maintain a distance of at least 1 inch (20 cm) from the antenna of this device while it
is in use.
2.3 FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that may cause
undesired
operation. Preliminary
SPK-633 installation manual FCC ID: RYK-CAS633
2.4 FCC Radio Frequency Interference statement
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. Operation
of this equipment in a residential area may cause harmful interference, in which case the user will be
required to correct the interference at his own expense. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
ٛ
Reorient or relocate the receiving antenna
ٛ
Increase the separation between the equipment and receiver
ٛ
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
ٛ
Consult the dealer or an experienced radio/TV technician for help
2.5 Export restrictions
This product or software contains encryption code which may not be exported or transferred from the
US or Canada without an approved US Department of Commerce export license. Preliminary
SPK-633 installation manual FCC ID: RYK-CAS633
2.6 Europe -EURtion of Conformity
This device complies with the essential requirements and other relevant provisions of the European
R&TTE Directive 1999/5/EC. Compliance to essential test suites is met per standards:
R&TTE Harmonized Standard Description
LVD specification EN 60950 EN 60950,ed. (1992), incl A1(1993), A2(1993), A3(1995) and A4(1997)
Safety of information technology equipment, including electrical business equipment. Meets R&TTE
directive art. 3.1.a of essential requirements on protection of the health and sefety of the user. ETSI
EMC specification ETSI EN 301 489-1 V1.2.1 (2000-08) ETSI EN 301 489-17 V1.1.1 (2000-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 1: Common technical requirements Part 17: Specific conditions for Wideband data and HIPERLAN
equipment
Meets R&TTE directive art. 3.1.b of essential requirements on protection with respect to Electro
Magnetic Compatibility. ETSI RF specification ETSI EN 300 328 Part 1 V1.2.2 (2000-07) ETSI EN 300
328 Part 2 V1.1.1 (2000-07) Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wideband Transmission systems; data transmission equipment operating in the 2,4 GHz ISM band and
using spread spectrum modulation techniques;
Part 1: Technical characteristics and test conditions Part 2:
Harmonized EN covering essential requirements under article
3.2 of the R&TTE Directive
Meets R&TTE directive art. 3.2.a on effective use of spectrum so as to
avoid harmful interference.
Important Notice :
This device is a 2.4 GHz low power RF device intended for home and office
use in EU and EFTA member states. In some EU / EFTA member states
some restrictions may apply. Please contact local spectrum management
authorithies for further details before putting this device into operation.
Preliminary SPK-633 installation manual FCC ID:
RYK-CAS633
3-Technical Specifications
Radio Technology IEEE 802.11g (DSSS and OFDM)
Operating Frequency 2412-2462MHz ISM band Modulation Schemes DQPSK, DBPSK, CCK, 16
QAM, 64 QAM RF Channel Availability 11 channels for United States (2412 MHz to 2462 MHz) 13
channels for Europe (2412 MHz to 2472 MHz)13 channels for Japan (2412 MHz to 2472 MHz),
channel 14 onlyavailable in DSSS mode (11 Mbps max)
11 channels for Taiwan (2412 MHz to 2462 MHz)
Data Rate Support for 54, 48, 36, 24, 18, 12, 9, and 6 Mbps OFDM, 11 and
5.5 Mbps CCK and legacy 2 and 1 Mbps data rates Media Access Protocol
CSMA/CA with ACK Transmitter RF Output Power < 18.0 dBm EIRP (typical)
including antenna gainOperating Voltage 3.3 VDC via PC host miniPCI slot
Interface miniPCI formfactorDevice driver Support Microsoft® Windows® NT,
2000, ME, and XP
To reduce potential radio interference to other users, the dipole antenna with a gain not more than
2dBi should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than
that permitted
for successful communication.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and
users. For laptop installations, the antenna must be installed to ensure that the proper spacing is
maintained in the event the users places the device in their lap during use (i.e. positioning of
antennas must be placed in the upper portion of the LCD panel only to ensure 20 cm will be
maintained if the user places the device in their lap for use) and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as the 2 conditions above are met, further transmitter testing will not be required.
However, the OEM integrator is still responsible for testing their end-product for any additional
compliance requirements required with this module installed (for example, digital device emissions,
PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain
laptop configurations or co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID can not be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product (including
the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in devices where the antenna may be installed
such that 20 cm may be maintained between the antenna and users (for example access points,
routers, wireless ASDL modems, certain laptop configurations, and similar equipment). The final
end product must be labeled in a visible area with the following: "Contains TX FCC ID:
RYK-CAS633".
RF Exposure Manual Information That Must be Included
The users manual for end users must include the following information in a prominent location
"IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna
used for this transmitter must be installed to provide a separation distance of at least 20 cm from
all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter."
Additional Information That Must be Provided to OEM Integrators
The end user should NOT be provided any instructions on how to remove or install the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:07:14 18:17:17+08:00
Create Date                     : 2008:07:10 11:21:46+08:00
Metadata Date                   : 2008:07:14 18:17:17+08:00
Format                          : application/pdf
Title                           : Microsoft Word - SPK-633 Manual.rtf
Creator                         : 07388
Document ID                     : uuid:328e28f4-2a11-4785-aff4-9b67f7dfde72
Instance ID                     : uuid:20503a9d-42f1-4f7b-b733-0a2716a43e8c
Page Count                      : 4
Author                          : 07388

EXIF Metadata provided by EXIF.tools