SparkLAN Communications WPEQ160ACNBT 802.11ac/a/b/g/n Wi-Fi+BT Module User Manual PowerPoint

Download:
Mirror Download [FCC.gov]
Document ID	3735946
Application ID	P8jiK5oBdXazNEW9gu4AZA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	52.97kB (662090 bits)
Date Submitted	2018-01-31 00:00:00
Date Available	2018-07-29 00:00:00
Creation Date	2018-01-19 11:28:44
Producing Software	Microsoft® PowerPoint® 2010
Document Lastmod	2018-01-25 12:01:13
Document Title	PowerPoint ç°¡å ±
Document Creator	Microsoft® PowerPoint® 2010
Document Author:	Emily

WPEQ-160ACN(BT)
802.11ac/b/g/n Dual-Band
1T1R Wi-Fi+Bluetooth 4.1 Combo
Half Mini PCIe Module
Next-Generation High Throughput Enterprise Networking Solution
WPEQ-160ACN(BT) is an 802.11ac/abgn 2.4GHz+5GHz half-mini PCIe module based on Qualcomm QCA9377-7
chipset. It supports 1T1R with RX diversity technology, which runs up to 433Mbps, provides higher throughput
performance and support Bluetooth 4.1+HS,, reliability and range. The WPEQ-160ACN(BT) supports 20/40/80MHz
and 256-QAM to maximize bandwidth efficiency.
WPEQ-160ACN(BT) is a Wi-Fi+Bluetooth 4.1 Combo Half Mini PCIe Module form factor, but with USB bus interface.
WPEQ-160ACN(BT) is a single-die wireless local area network (WLAN) solution to support 1x1 802.11ac/abgn
WLAN standards, designed to deliver superior integration of WLAN and low-energy technology.
Embedded Application :
Applications include medical devices, security systems,
Key Feature :
●
Qualcomm Atheros QCA9377-7
●
Antenna: 2xU.FL connectors, 1T1R
●
Data Rates: Allows link speeds up to 433Mbps
●
Support Win7/8.1/10
●
Bluetooth V4.1,V4.0 LE, V3.0+HS, V2.1+EDR
industrial, PoS, digital signs, Gaming machine, Medical
equipment, industrial tablet PC’s, handheld devices, thin
client devices, and many more.
WPEQ-160ACN(BT)
ver1.0
Specification :
Standards:
Chipset:
Data Rate:
IEEE 802.11ac/a/b/g/n (1T1R)
Bluetooth V4.1,V4.0 LE, V3.0+HS, V2.1+EDR
Qualcomm Atheros QCA9377-7
802.11b: 11Mbps / 802.11a/g: 54Mbps / 802.11n: MCS0~7/ 802.11ac: MCS0~9
Bluetooth: 1 Mbps, 2Mbps and Up to 3Mbps
IEEE 802.11 ac/a/b/g/n ISM Band, 2.412GHz~2.462GHz, 5.180MHz~5.240MHz,
Operating Frequency:
5.745MHz~5.825MHz
Bluetooth: 2.402GHz ~ 2.480GHz
*Subject to local regulations
Interface:
USB
Form Factor:
Half Mini PCIe
Antenna:
2xU.FL connectors (main antenna 0 on, diversity antenna 1 off) for 1T1R
Main antenna : WLAN TX ; Diversity antenna : BT TX
802.11b: DSSS (DBPSK, DQPSK, CCK)
802.11a/g: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
Modulation:
802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM)
Bluetooth BR / EDR: GFSK ; Bluetooth LE: GFSK (1Mbps)
Power Consumption
TX: TBD / RX: TBD
Operating Voltage:
DC 3.3V
Operating Temperature Range:
-20°C~70°C
Storage Temperature Range:
-30°C~85°C
Humidity
5%~90% (Operating)
(Non-Condensing)
5%~95% (Storing)
Dimension (in mm):
29.85mm x 26.3mm
Weight (g):
≦ 4.7g
Driver Support:
Windows7/8.1/10
Security
64/128-bits WEP, WPA, WPA2, 802.1x
WPEQ-160ACN(BT)
ver1.0
OUTPUT POWER & SENSITIVITY
802.11b
Data Rate
Tx ± 2dBm
Rx Sensitivity
11Mbps
21dBm
≦ -76dBm
802.11g
Data Rate
Tx ± 2dBm
Rx Sensitivity
54Mbps
21dBm
≦ -74dBm
802.11n @ 2.4GHz
Data Rate
Tx ± 2dBm
Rx Sensitivity
HT20
MCS7
21dBm
≦-70dBm
HT40
MCS7
20dBm
≦-68dBm
802.11a
Data Rate
Tx ± 2dBm
Rx Sensitivity
54Mbps
18dBm
≦-73dBm
802.11n/ac @ 5GHz
Data Rate
Tx ± 2dBm
Rx Sensitivity
HT20 /
VHT20
MCS7 / MCS8
17dBm
≦-67dBm
HT40 /
VHT40
MCS7 / MCS9
16dBm
≦-63dBm
802.11ac
Data Rate
Tx ± 2dBm
Rx Sensitivity
MCS9
15dBm
≦-55dBm
VHT80
Bluetooth
Data Rate
Tx ± 2dBm
Rx Sensitivity
1Mbps, 3Mbps
-4≦Output Power≦ -1dBm
<0.1% BR, EDR at -70dBm
1Mbps
-4≦Output Power≦ +0dBm
<0.1% BLE at -70dBm
WPEQ-160ACN(BT)
ver1.0
Pin Assignment
Pin#
Pin Name
Description
Pin#
Pin Name
Description
No Connection
+3.3V
+3.3V
No Connection
GND
GND
No Connection
No Connection
No Connection
No Connection
GND
GND
10
No Connection
11
No Connection
12
No Connection
13
No Connection
14
No Connection
15
GND
GND
16
No Connection
17
No Connection
18
GND
GND
Input and active low signal.
This signal is used by the
system to disable radio
operation on add-in cards
19
No Connection
20
W_DISABLE_L
that implement radio
frequency applications.
When implemented, this
signal requires a pull-up
resistor on the card.
21
GND
GND
22
No Connection
23
No Connection
24
No Connection
25
No Connection
26
GND
GND
27
GND
GND
28
No Connection
29
GND
GND
30
No Connection
31
No Connection
32
No Connection
WPEQ-160ACN(BT)
ver1.0
Pin Assignment
Pin#
Pin Name
Description
Pin#
Pin Name
Description
33
No Connection
34
GND
GND
35
GND
GND
36
USB D-
USB serial data
37
GND
GND
38
USB D+
USB serial data
39
3.3V
+3.3V
40
GND
GND
41
3.3V
+3.3V
42
No Connection
Output and open drain
active low signal.
This signal is used to allow
43
GND
GND
44
LED_WLAN_L
the PCI Express Mini Card
(OPT)
add-in card to provide status
indicators via LED devices
that will be provided by the
system.
45
No Connection
46
No Connection
47
No Connection
48
No Connection
49
No Connection
50
GND
GND
51
No Connection
52
3.3V
+3.3V
WPEQ-160ACN(BT)
ver1.0
Federal Communication Commission Interference Statement (to be placed on End Products)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:



Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate
this equipment. (Example - use only shielded interface cables when connecting to computer or
peripheral devices).
End Product Labeling
This transmitter module is authorized only for use in devices where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final end
product must be labeled in visible area with the following: “Contains FCC ID: RYKWPEQ160ACNBT”
End Product Manual Information
The user manual for end users must include the following information in a prominent location
“IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna
used for this transmitter must be installed to provide a separation distance of at least
20cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.” This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain
laptop configurations or colocation with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for reevaluating the end product
(including the transmitter) and obtaining a separate FCC authorization. This device is intended
only for OEM integrators under the following conditions: The antenna must be installed such
that 20 cm is maintained between the antenna and users. As long as a condition above is met,
further transmitter test will not be required. However, the OEM integrator is still responsible
for testing their end product for any additional compliance requirements required with this
module installed (for example, digital device emissions, PC peripheral requirements, etc.).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Emily
Create Date                     : 2018:01:19 11:28:44+08:00
Modify Date                     : 2018:01:25 12:01:13+08:00
Language                        : en-US
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Emily
Title                           : PowerPoint 簡報
Creator Tool                    : Microsoft® PowerPoint® 2010
Metadata Date                   : 2018:01:25 12:01:13+08:00
Producer                        : Microsoft® PowerPoint® 2010
Document ID                     : uuid:e4efa476-839e-4697-b92e-843ecb57d8a1
Instance ID                     : uuid:5f545baa-3bea-48c7-968b-51f0ff81a7b5
Page Count                      : 7

EXIF Metadata provided by EXIF.tools