SparkLAN Communications WPET236ACNBT 802.11ac/a/b/g/n 2T2R Wi-Fi + Bluetooth 4.2 Half Mini PCIe Module User Manual rev2
SparkLAN Communications, Inc. 802.11ac/a/b/g/n 2T2R Wi-Fi + Bluetooth 4.2 Half Mini PCIe Module Users Manual rev2
Users Manual_rev2.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4110228 |
| Application ID | IHQUyA90HEJbzy6e9weaww== |
| Document Description | Users Manual_rev2.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 52.66kB (658237 bits) |
| Date Submitted | 2018-12-19 00:00:00 |
| Date Available | 2018-12-19 00:00:00 |
| Creation Date | 2018-12-19 10:57:39 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2018-12-19 10:57:39 |
| Document Title | Users Manual_rev2.pdf |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | Emily Yang |
Wireless Module WPET-236ACN(BT) SparkLAN WPET-236ACN(BT) is a highly integrated 802.11a/b/g/n/ac 2T2R and BT 2.1/3.0/4.1/4.2 module that support 2-stream 802.11ac Multi-user MIMO. The download speed are 300Mbps on N networks and 867Mbps on AC network. WPET-236ACN(BT) is integrates the Bluetooth transmission technology for voice and data transfers between devices in a short distance. It supports Multiple drivers (Android/ Windows/ Linux) for various application. It combines a WLAN MAC, a 2T2R capable WLAN baseband, BT Protocol Stack (LM, LL, and LE), BT Baseband, modem. It provides a complete solution for a high throughput performance integrated wireless LAN and Bluetooth device. It is designed to provide excellent performance with low power consumption and enhance the advantages of robust system and cost-effective. It is targeted at competitive superior performance, better power management applications. Embedded Application Key Feature A Applications include Tablet/ Notebook/ Support 802.11ac 2x2, compliant with MU-MIMO. Operates in 2.4GHz and 5GHz frequency bands Data rates: 173.3Mbps using 20MHz bandwidth, TV board/ Advertising machine/ OTT/ IPTV/ DVB/ STB / DV/ IPC/ Mini Driving Recorder/ Doorbell / Smart TV/ Intelligent Projector 400Mbps using 40MHz bandwidth, and 866.7Mbps Pico/ VR/ AR terminal/ Wireless storage/ using 80MHz bandwidth. Printer/ POS machine/ Vehicle mounted schemes front/ Rear Terminal UAV/ Robot thin client devices, and many more. BPSK, QPSK, 16 QAM, 64 QAM, 256QAM modulation Security support for WPE/WPA/WPA2 All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module Specification IEEE 802.11ac/a/b/g/n (2T2R) Standards Bluetooth v2.1+EDR, v3.0, v4.1, v4.2 LE Chipset Realtek RTL8822BU 802.11b: 11Mbps / 802.11a/g: 54Mbps / 802.11n: MCS0~7/ 802.11ac: MCS0~9 Data Rate Bluetooth: 1Mbps, 2Mbps and up to 3Mbps EDR IEEE 802.11 ac/a/b/g/n ISM Band, 2.412GHz~2.484GHz, 5.150GHz~5.850GHz Operating Frequency *Subject to local regulations Form Factor Half Mini PCie Antenna 2xIPEX MHF I connector(Ant 0 for wifi only, Ant 1 for wifi+BT ) 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11a/g: OFDM (BPSK, QPSK, 16-QAM, Modulation 64-QAM) 802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM) TX Mode: 600mA Power Consumption RX Mode: 350mA Operating Voltage DC 3.3V Operating Temperature Range -20°C ~ +70°C Storage Temperature Range -40°C ~ +80°C Humidity 5%~95% (Operating) (Non-Condensing) 5%~90% (Storing) Dimension (in mm) 30.02 x 26.89 x 4.3 mm Weight (g) 4.6g Driver Support Windows 7, 8.1, 10 / Linux / Android Security WEP ,WPA,WPA2 All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module Certification ■ FCC ■ IC □ ■ CE (RED EN 300 328 V2.1.1 / EN 301 893 V2.1.1) ■ MIC NCC ASNZS □ Hardware Setup: Insert WPET-236ACN(BT) into the mini pcie slot of end product. Connects two external antenna at I-PEX connectors on the board. Note to the voltage level should be 3.3V. Software setup: Please follow up software guideline of Sparklan official released. http://www.sparklan.com/p2-products-detail.php?PKey=cbfdVLYTRgDh2wEA5MIL6knazW67-QInS96J 7Wkiz2A&WPET-236ACN(BT) Language Support ： 1->English Chinese 11->Finish 2->Basque 7->Croatian 3->Bulgarian 8->Czech 12->French(Canada) 16->Hungarian 17->Indonesian 20->Korean 21->Norwegian 4->Catalan 9->Danish 5->Simple Chinese 6->Traditional 10->Dutch 13->French(France) 18->Italian 22->Polish 14->German 15->Greek 19->Japanese 23->Portuguese(Brazil) 24->Portuguese(Portugal) 25->Romanian 26->Russian 27->Serbian(Cyrillic) 28->Slovak 29->Slovenian 30->Spanish 31->Swedish 32->Thai 33->Turkish -- How to install: 1. Enter the directory and run setup.exe. 2. Follow the prompt and restart the system. -- How to Silent Install: All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module 1. Enter the directory and run setup.exe /s -f2"c:\setup.log" under command line. 2. Or execute silent install Batch file. -- How to Silent un-install: 1. Enter the directory and run Setup.exe -uninst -s -f1"(Uninstall.iss Path)" -f2"c:\setup.log" under command line. p.s. The (Uninstall.iss Path) is the full path of the file “Uninstall.iss”. For example , the full path of Uninstall.iss is “c:\Realtek\11n USB WLAN Card” .The command will become Setup.exe -uninst -s -f1"(Uninstall.iss Path)" -f2"c:\setup.log" 2. Or execute silent uninstall Batch file. -- How to confirm driver version: 1. Right click computer->Manage->Device Manager. 2. Right click the Device Properties->Driver All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module Mechanical Dimension (mm) Pin Assignment All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module Pin Assignment PIN# Pin Name Design Status PIN# Pin Name Design Status WAKE_L NC +3.3Vaux YES Reserved NC GND YES Reserved NC +1.5V NC CLKREQ_L NC UIM_PWR NC GND YES 10 UIM_DATA NC 11 REFCLK- NC 12 UIM_CLK NC 13 REFCLK+ NC 14 UIM_RESET NC 15 GND YES 16 UIM_VPP NC 17 Reserved NC 18 GND YES 19 Reserved NC 20 W_DISABLE_L NC 21 GND YES 22 PERST_L NC 23 PERu0 NC 24 +3.3V NC 25 PERp0 NC 26 GND YES 27 GND YES 28 +1.5V NC 29 GND YES 30 SMB_CLK NC 31 PETn0 NC 32 SMB_DATA NC 33 PETp0 NC 34 GND YES 35 GND YES 36 USB_D- YES 37 RESERVED NC 38 USB_D+ YES 39 RESERVED NC 40 GND NC 41 RESERVED NC 42 LED_WWAN_L NC 43 GND YES 44 LED_WLAN_L NC 45 RESERVED NC 46 LED_WPAN_L NC 47 RESERVED NC 48 +1.5V NC 49 RESERVED NC 50 GND YES 51 RESERVED NC 52 +3.3V YES All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FOR MOBILE DEVICE USAGE (>20cm/low power) Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, 2) The transmitter module may not be co-located with any other transmitter or antenna. 3) Module approval valid only when the module is installed in the tested host or compatible series of host All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module which have similar RF exposure characteristic with equal or larger antenna separation distance. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling FOR MOBILE DEVICE USAGE (>20cm/low power) This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: RYK-WPET236ACNBT”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module susceptible de provoquer un fonctionnement indésirable. FOR MOBILE DEVICE USAGE (>20cm/low power) Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 20 cm entre le radiateur et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed and operated with greater than 20cm between the antenna and users 2) The transmitter module may not be co-located with any other transmitter or antenna. 3) Module approval valid only when the module is installed in the tested host or compatible series of host which have similar RF exposure characteristic with equal or larger antenna separation distance. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit être installé et exploité avec plus de 20 cm entre l'antenne et les utilisateurs 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. 3) Approbation du Module valable que lorsque le module est installé dans l'hôte testé ou de la série de l'hôte compatible qui ont même caractéristique de l'exposition aux RF avec la distance égale ou supérieure séparation antenne. Tant que les 3 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling FOR MOBILE DEVICE USAGE (>20cm/low power) This transmitter module is authorized only for use in device where the antenna may be installed and operated with greater than 20cm between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 6158A-PET236ACNBT”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un appareil où l’antenne peut être installée et utilisée à plus de 20 cm entre l’antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 6158A-PET236ACNBT". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit; (detachable antenna only) All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module (iii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; (detachable antenna only) (iv) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. Avertissement: Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis pour les dispositifs utilisant les bandes de 5 250 à 5 350 MHz et de 5 470 à 5 725 MHz doit être conforme à la limite de la p.i.r.e; (detachable antenna only) (iii) pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée, selon le cas; (detachable antenna only) (iv) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, énoncée à la section 6.2.2.3, doivent être clairement indiqués DETACHABLE ANTENNA USAGE This radio transmitter (IC: 6158A-PET236ACNBT / Model: WPET-236ACN(BT)) has been approved by ISED to operate with the antenna type listed below with maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (IC: 6158A-PET236ACNBT / Model: WPET-236ACN(BT)) a été approuvé par ISED pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Approved antenna(s) list All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0 Wireless Module No. Transmitter Circuit Chain(0) Chain(1) Chain(0) Chain(1) Chain(0) Chain(1) Chain(0) Chain(1) Chain(0) Chain(1) Brand Model Antenna Type 2.4G gain with 5G gain with cable loss (dBi) cable loss (dBi) Sparklan AD-301N Dipole 4.4 Sparklan AD-103AG Dipole 2.02 Connector Type B1&2: 5.2 B3&4: 5.8 B1&2: 1.93 B3&4: 2.03 Sparklan AD-305N Dipole 5.0 5.0 Sparklan AD-303N Dipole 3.0 3.0 Sparklan AD-302N Dipole 3.0 2.0 IPEX MHF I at modular side & RP-SMA (M) at antenna side All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WNFB-263ACNI(BT) ver.1.0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 13 Language : zh-TW Tagged PDF : Yes Author : Emily Yang Creator : Microsoft® Office Word 2007 Create Date : 2018:12:19 10:57:39+08:00 Modify Date : 2018:12:19 10:57:39+08:00 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools