Spectra Hr320 Users Manual

HR320 to the manual 6a8e3020-d740-4f70-8b2b-eb4c96514a42

: Spectra Spectra-Hr320-Users-Manual-528159 spectra-hr320-users-manual-528159 spectra pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Introduction

HR320 Receiver

User Guide

•

Receiver

Thank you for choosing the Spectra Precision® Laser HR320 from
the Trimble® family of precision products. The HR320 is a
battery-operated laser receiver that detects a rotating laser beam and
indicates its position relative to the beam using LCD symbols.
Before using the receiver, be sure to read this user guide
carefully. Included in it is information about setting up, using,
and maintaining the receiver. Also included in this manual are
CAUTIONS and Notes. Each of these words represents a level
of danger or concern. A CAUTION indicates a hazard or unsafe
practice that could result in minor injury or property damage.
A Note indicates important information unrelated to safety.
Your comments and suggestions are welcome; please contact us at:
Trimble Construction Division
5475 Kellenburger Road
Dayton, Ohio 45424-1099 U.S.A.
Phone:	 (937) 245-5600
	
(800) 538-7800
FAX:	 (937) 233-9004
Internet:	 www.trimble.com

Features and Functions
1.	 Power/Audio Button—is
3
a multi-functional button
that is used to turn on/off
4
2
the receiver and adjust the
5
volume.
1
2.	 Grade-Sensitivity Button—
allows you to select
the receiver’s on-grade
sensitivities, which include
fine: 2.0 mm (1/16 in.) and
coarse: 6.0 mm (1/4 in.).
6
3.	 Liquid Crystal Display
(LCD)—shows the
elevation, grade sensitivity, audio,
and battery status.
4.	 Photocell—detects the laser beam when it strikes the receiver.
5.	 Marking Notch—align with the on-grade portion of the
photocell and is used to mark elevation readings. The marking
notch is 50.0 mm (2 in.) from the top of the receiver.
6.	 Audio Port—the sound comes out of this opening.

7.	 Clamp-Tab Recess—the
general-purpose clamp
release tab fits into this area
locking the clamp in place.
8.	 Clamp Slots—allows the
clip-on general-purpose
clamp to attach to receiver.
9.	 Battery Housing—holds
two AA alkaline, Ni-MH,
or Ni-Cd batteries.
10.	Battery Door—holds the
batteries securely in place.
11.	Label—shows the serial
number and manufacturing
date.

11

7
8

9
10

www.trimble.com
–2–

How to Use the Receiver

Learning the Receiver Functions

Installing/Removing the Batteries

Turning On/Off the Receiver
1.	 Press the power/audio
Above Grade
button to turn on the
receiver.
Audio On
Grade Sensitivity
	 Note: When the
On Grade
receiver is initially
turned on, all LCD
Battery Status
symbols, and the
audio signal are turned
Below Grade
on for one second
(diagnostic mode).
After the diagnostic
mode is complete, the grade sensitivity (fine) and the audio
(loud) symbols appear.
2.	 Press and hold the power/audio button for one second to turn off
the receiver.

1.	 Open the battery door using a coin or your thumbnail.
2.	 Install/Remove the 2 AA batteries noting the positive (+) and
negative (–) diagram inside the housing.
3.	 Push down on the battery door until it “clicks” into position.

–5–

–3–

Selecting the Grade Sensitivity
The receiver always starts up with the on-grade sensitivity (fine) active.
1.	 Press the grade-sensitivity button repeatedly to select between
fine: 2.0 mm (1/16 in.) and coarse: 6.0 mm (1/4 in.) grade
sensitivity.

Using the Receiver with a Laser
1.	 Press the power/audio button to turn on the receiver.
2.	 Position the receiver so that its photocell faces the laser.
3.	 Move the receiver up/down until the LCD show an on-grade
reading.

Selecting the Audio Function
The receiver always starts up with the audio mode (loud) active.
1.	 Press the power/audio button repeatedly to cycle through the
audio levels, which include loud, off, and soft.
	 Note: If the audio function is on, the receiver beeps quickly
when the receiver is above the laser beam, slowly when below it,
and continuously when centered in the laser beam or on grade.
When audio is off, a single beep indicates laser is detected.
–6–

–7–

–4–

LCD/Audio Information
LCD Readout

Function

Audio Output

Down arrow

High

Fast beeping tone

Center bar &
down arrow

Fine-high

Fast beeping tone

Center bar

On-grade

Continuous tone

Center bar &
up arrow

Fine-low

Slow beeping tone

Up arrow

Low

Slow beeping tone

Battery

Full battery

NA

Battery

Low battery

N/A

Horn

Audio on/soft/loud

Single beep

Fine

Fine grade sensitivity

N/A

Coarse

Coarse grade sensitivity

N/A

–8–

General-Purpose Clamp

Attaching the Receiver to the Grade Rod or Wooden Pole

The C59 general-purpose clamp allows the receiver to be attached to
a grade rod or wooden pole.

1.	 Slide the general-purpose
clamp into the receiver
until it “clicks” into
position.
2.	 Turn the jaws screw
counterclockwise to open
the clamp’s jaws.
3.	 Slide the grade rod or
wooden pole between the
clamp’s jaws.
4.	 Turn the jaws screw
clockwise to hold the
general-purpose clamp
securely in place.

Features and Functions
1

2
3

5

4

LCD Channels
Capture Height
Acceptance Angle
On-Grade Sensitivity
Power Source
Battery Life @ 20 °C (68 °F)
Battery Indicator
Beeper volumes
Automatic Shutoff
Spectral Sensitivity

1.	 Release Tab—allows the receiver to be locked onto or released
from the general-purpose clamp.
2.	 Jaws—close/open so that the general-purpose clamp can be
attached to or released from a grade rod or wooden pole.
3.	 Jaws Screw—controls the closing/opening of the jaws.
4.	 Reading Edge—aligns with the receiver’s on-grade marking
notch.
5.	 Bubble Screw Holes—are where the optional 1277-6251S
bubble vial kit is mounted.

–9–

Receiver Specifications

Marking Notch
Operating Temperature
Storage Temperature
Weight
Dimensions (H x W x D)

– 10 –

5
50.0 mm (2 in.)
90°
Fine: 2.0 mm (1/16 in.)
Coarse: 6.0 mm (1/4 in.)
Two 1.5-V batteries
(type LR6/AA)
Alkaline: 70 hours
LCD battery symbol
High: 100+ dBA
Low: 75 to 85 dBA
30 minutes after last laser detection or
push-button actuation
Operates with red visible and infrared
rotating lasers with wavelengths
between 610 and 900 nm
50.0 mm (2 in.) below top of receiver
–20 °C to +60 °C (–4 °F to +140 °F)
–40 °C to +70 °C (–40 °F to +158 °F)
0.3 kg (12 oz)
16.3 cm x 7.4 cm x 2.9 cm
(6.4 in. x 2.9 in x 1.14 in.)

Declaration of Conformity

Warranty

This receiver has been tested and found to comply with the limits
for a Class B digital device for radio noise for digital apparatus
set out in the Radio Interference Regulations of the Canadian
Department of Communication, and is pursuant to part 15 of
the Federal Communication Commission (FCC) rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This receiver generates radio
frequency. If it’s not used in accordance with the instructions, it may
cause harmful interference to radio or television reception. Such
interference can be determined by turning the receiver off and on.
You are encouraged to try eliminating the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the laser and the receiver.
For more information, consult your dealer or an experience radio/
television technician.
CAUTION: Changes or modifications to the receiver that are
not expressly approved by Trimble could void authority to use
the equipment.

Application of 	
89/336/EEC
Council Directive(s):
Manufacturer’s Name:	
Trimble Navigation Ltd.
Manufacturer’s Address:	5475 Kellenburger Road
Dayton, Ohio 45424-1099 U.S.A.
European Representative 	
Trimble GmbH
Address:	Am Prime Parc 11
65479 Raunheim, Germany
Model Number:	
HR320
Conformance to Directive(s):	EC Directive 89/336/EEC using
EN55022 and EN50082-1
Equipment Type/Environment:	ITE/residential, commercial &
light industrial
Product Standards:	Product meets the limit B and
methods of EN55022
	Product meets the levels and
methods of IEC 801-2, 8 kV air,
4 kV contact IEC 801-3, 3 V/m
26 to 1000 MHz 80%, @ 1 kHz

Trimble warrants the receiver to be free of defects in material and
workmanship for a period of two years.
Trimble or its authorized service center will repair or replace, at its
option, any defective part for which notice has been given during
the warranty period. If required, travel and per diem expenses to
and from the place where repairs are made will be charged to the
customer at the prevailing rates.
Customers should send the product to Trimble Navigation Ltd. or
the nearest authorized service center for warranty repairs, freight
prepaid. In countries with Trimble subsidiary service centers, the
repaired product will be returned to the customer, freight prepaid.
Any evidence of negligent, abnormal use, accident, or any attempt
to repair the product by other than factory-authorized personnel
using Trimble certified or recommended parts, automatically voids
the warranty.
The foregoing states the entire liability of Trimble regarding
the purchase and use of its equipment. Trimble will not be held
responsible for any consequential loss or damage of any kind.
This warranty is in lieu of all other warranties, except as set forth
above, including any implied warranty merchantability of fitness for
a particular purpose, are hereby disclaimed. This warranty is in lieu
of all other warranties, expressed or implied.

– 14 –

For product recycling instructions and more information,

please go to: www.trimble.com/environment/summary.html

Recycling in Europe
Recycling in Europe
To recycle Trimble WEEE,
call: +31 497 53 2430, and
ask for the “WEEE associate,” or
Mail a request for recycling instructions to:
Trimble Europe BV c/o Menlo
Worldwide Logistics
Meerheide 45 5521 DZ Eersel, NL

– 11 –

EMC Declaration of Conformity

– 13 –

Notice to Our European Union Customers

– 15 –

– 12 –

Trimble Construction Division
5475 Kellenburger Road
Dayton, Ohio 45424-1099
U.S.A.
+1-937-245-5600 Phone
www.trimble.com

© 2008, Trimble Navigation Limited. All rights reserved.
Reorder PN 1277-4450 (10/08)



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42
Create Date                     : 2008:10:16 11:48:53-04:00
Metadata Date                   : 2008:10:16 11:49-04:00
Modify Date                     : 2008:10:16 11:49-04:00
Creator Tool                    : Adobe InDesign CS3 (5.0.3)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 9376 bytes, use -b option to extract)
Instance ID                     : uuid:5e52b138-c620-486f-a391-f1bce3d0e440
Document ID                     : adobe:docid:indd:a94e510c-9937-11dd-8191-ca5c3c19c78d
Rendition Class                 : proof:pdf
Derived From Instance ID        : a94e510b-9937-11dd-8191-ca5c3c19c78d
Derived From Document ID        : adobe:docid:indd:34332feb-9923-11dd-ad2d-b530a0dbe85b
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 72.00, 300.00, 300.00, 300.00, 300.00, 600.00
Manifest Placed Y Resolution    : 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 72.00, 300.00, 300.00, 300.00, 300.00, 600.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:3A8402F2A790DD11AF75F08830DD5D99, uuid:7916B00AD088DD11A281E51840FDE72F, uuid:72C4C56C8782DD11A384A57D67962AEC, uuid:8C50CD02E35CDD11B1FFCCF8DDBF01C0, uuid:63AA6E76775DDD11A16DD1424C3572DC, uuid:974ABEFD7D5DDD118A12BBA6A3EB94B7, uuid:944ABEFD7D5DDD118A12BBA6A3EB94B7, uuid:CBE85A2A835DDD11AF9BD6C9F1C729C9, uuid:BB0F0BD1E25CDD11B1FFCCF8DDBF01C0, uuid:879a223f-d970-4131-a256-dae2a1202258, uuid:7916B00AD088DD11A281E51840FDE72F, uuid:DC896740CA88DD11A206AA5D1F2CDA5B, uuid:E2896740CA88DD11A206AA5D1F2CDA5B, uuid:D9896740CA88DD11A206AA5D1F2CDA5B, uuid:38068EFCA789DD11AB9FDB7D0D8893EB
Manifest Reference Document ID  : uuid:398402F2A790DD11AF75F08830DD5D99, uuid:4D6B16B7707FDD11B94A9863C0B63AD2, uuid:B26EE8E3867EDD11A7CB9E6070D24136, uuid:0BB7A64BE25CDD11B1FFCCF8DDBF01C0, uuid:D79D21F5274FDC11A0A78A85BE52327A, uuid:E851E7275752DC119618AAA52D6024F9, uuid:FAE7784F5352DC1192369DA3DEE4571D, uuid:0DE0C6105652DC119618AAA52D6024F9, uuid:05B7A64BE25CDD11B1FFCCF8DDBF01C0, uuid:89A8E177D25CDD11BAD5FA93C543A57B, uuid:4D6B16B7707FDD11B94A9863C0B63AD2, uuid:B2A1CD0D0EB9DA11A627B18FD047923C, uuid:A31FEE8C3F80DD11BE61B5551BB2432C, uuid:4B0201E2BF88DD11A206AA5D1F2CDA5B, adobe:docid:photoshop:73592efb-e89d-11d9-acc9-ca8354e953f0
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS3 (5.0.3)

EXIF Metadata provided by EXIF.tools