Spectralink RFP4-2G4 2.4GHz communication system/RFP4-2G4 User Manual Base station 1405 7101 ed1

Download:
Mirror Download [FCC.gov]
Document ID	178406
Application ID	h6CeO/n8WxNnhYifSdLeVw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.93kB (524068 bits)
Date Submitted	2001-11-08 00:00:00
Date Available	2002-03-11 00:00:00
Creation Date	2001-10-05 10:59:15
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	0000-00-00 00:00:00
Document Title	Base station 1405 7101 ed1
Document Creator	QuarkXPress Passportª 4.11: AdobePS 8.7.2 (104)
Document Author:	Mac 3

Base station 1405 7101 ed1
05/10/01
10:57
Side 1
Base Station RFP4-2G4
User’s Guide
Base station 1405 7101 ed1
05/10/01
10:57
Side 2
1 Introduction
2 Installation
The Radio Fixed Part (RFP) is designed with two
internal antennas and supports antenna diversity.
The RFP is also able to carry out handover between
the RF channels under the same RFP, and handles
four wireless speech channels simultaneously. The
RFP is able to frame synchronise with other RFP’s
under the same Central Control Fixed Part (CCFP).
First you have to determine where to install the RFP
to have the right coverage. The average coverage
within buildings is 75 meters. The coverage
depends on the construction of the building, architecture and choice of building material. You may
have to use the RFP coverage determination kit
(deployment tool) to optimize your installation.
This deployment tool (accessories), consists of an
RFP which has no need for a CCFP. It can easily be
moved around in the building and 1 to 8 handsets
can be connected.
Transmission lenght is up to 1 km on a twisted pair
(in one building), e.g. cat.4, between the RFP and
CCFP. The RFP is also power supplied from this
connection (maximum supply 1.5 W). The radius of
coverage is up to 300 meters with a handset in free
sight. It is possible to connect a maximum of 8
RFP’s to a CCFP without an expansion board, 16
RFP’s with an expansion board and 32 with a link
system.
Pull the a/b wire from your installation through the
wall holder and then mount the wall holder on the
wall.
Connect the a/b wire to the plug on the backside of
the RFP, using the 2 inner connectors of the plug.
Base station 1405 7101 ed1
05/10/01
10:57
Side 4
“Click” the RFP on to the wall holder.
After the CCFP is powered up again a cable lenght
measurement is needed.
NOTE!
Cable dimensions min. as AWG 26.
If you need to remove the Base Station please separate it from the wall holder with a gentle push of a
screwdriver.
Base station 1405 7101 ed1
05/10/01
10:57
Side 6
Important Safety Instructions and Product
Information
Before using your telephone equipment, you should
always follow basic safety instruction to reduce the
risk of fire, electrical shock and injury to persons,
and damage to property.
Read and understand all instructions
Follow all warnings and instructions including
those marked on the product
Unplug this product before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use damp
cloth for cleaning
Do not install the telephone equipment in the
bathroom or near a wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool
Slots or openings in the cabinet back and bottom of the equipment are provided for ventilation
to protect it from over-heating. These openings
must not be blocked or covered.
The product should be operated only from the
type of power source indicated on the instructions. If you are not sure of the type of power
supply, consult your dealer or local power company.
7 Do not overload wall outlets and extension cords
as this can result in fire or electrical shock.
8 Never push objects of any kind into this product
through cabinet slots as they may touch dangerous voltage points or short out parts that could
result in fire, electrical shock, or injury. Never
spill liquid of any kind into this product.
9 To reduce the risk of electrical shock or burns,
do not disassemble this product. Opening or
removing covers may expose you to dangerous
voltages, dangerous electrical current, or other
risks. Incorrect reassemble can cause electrical
shock when the appliance is subsequently used.
If the product need repair, consult your dealer.
10 Refer servicing to qualified service personnel
under the following conditions:
Base station 1405 7101 ed1
05/10/01
10:57
Side 8
AQ If liquid has been spilled into the product
BQ If the product has been exposed to rain or water
CQ If the product does not operate normally when
following the operating instructions in the manual. Adjust only those controls that are covered
by the operation instructions. Improper adjustment of other controls may result in damage and
will often require extensive work by qualified service personnel to restore the product to normal
operation.
DQ If the product has been dropped or cabinet has
been damaged
EQ If the product exhibits a distinct change in performance
11 Avoid using telephone during an electrical storm.
There may be a risk of electrical shock from lightning
12 Do not use the telephone to report a gas leak in
the vicinity of the leak
13 Do not place the unit near microwave ovens,
radio equipment, or non-ground connected televisions. These appliances may cause electrical
interference to the base or handset
14 The unit must be installed on a hard, plane surface and connected to a functional 120 volt AC
power netadapter and plug the adapter into the
power outlet
15 The system will not operate in the event of a
blackout. Please keep a backup phone for emergencies
Intrinsic safety
Do not install the unit in conditions where there is a
danger of electrically ignited explosions.
Exposure to sunlight, heat and moisture
Do not expose the unit to direct sunlight for long
periods. Keep away from excessive heat and
moisture.
Spare parts and accessories
Use only approved spare parts and accessories. The
operation of non-approved parts cannot be guaranteed and may even cause damage.
Base station 1405 7101 ed1
05/10/01
10:57
Side 10
Power failure
In the event of a power failure, you cannot use the
wireless system to make or receive calls
telephone lines and internal metallic water pipe
system, if present, are connected together. This precaution may be particularly important in rural areas.
NOTICES
CAUTIONS: Users should not attempt to make such
connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.
NOTICE: Before installing this equipment, users should ensure that it is permissible to be connected to
the facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be coordinated
by a representative designated by the supplier. Any
repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user
to disconnect the equipment.
Users should ensure for their own protection that the
electrical ground connections of the power utility,
If your telephone equipment causes harm to the telephone network, the telephone company may ask you
to disconnect the system from the line until the problem has been corrected or they may discontinue
your service temporarily. If possible, they will notify
you in advance, But if advance notice is not practical, you should be notified as soon as possible. You
will be informed of your right to file a complaint with
the FCC.
Your telephone company may make changes in its
facilities, equipment, operations, or procedures that
could affect the proper functioning of your telephone
system, If they do and it is possible, you will be notified in advance to give you an opportunity to mainta-
Base station 1405 7101 ed1
05/10/01
10:57
Side 12
in uninterrupted telephone service. If you experience
trouble with this telephone system, disconnect it from
the network until the problem has been corrected or
until you are sure that the equipment is not malfunctioning.
Note: This equipment has been tested and found to
comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the seperation between the equioment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Power Outage: In the event of a power outage, your
cordless telephone will not operate. The cordless
telephone requires electricity for operation. You should have a telephone which does not require electricity available for use during power outages.
Information to user: The users manual or instruction manual for an intentional or unintentional radiator
shall caution the user that changes or modifications
not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Base station 1405 7101 ed1
05/10/01
10:57
Side 14
LIMITED WARRANTY
This limited, non-transferable warranty is provided to
the original purchaser. The product is warranted to
be free from defects in materials and workmanship
under normal installation, use and service for a period of one (1) year from the date of purchase as
shown on the purchaser’s receipt.
Our obligation under this warranty is limited to repair
or replacement (at our option) of the product or any
part(s) which are defective provided that the product
is returned to the original place of purchase or an
authorized service location during the warranty period. Products returned must be accompanied by a
copy of the purchase receipt. In the absence of a
purchase receipt, the warranty period shall be one
(1) year from the date of manufacture. Repair or
replacement of the product is your sole and exclusive remedy.
If the product is repaired, reconditioned component
parts or materials may be used. If the product is
replaced, we may replace it with a new or reconditio-
ned product of the same or similar design. The repaired product will be warranted for either (a) 90 days or
(b) the remainder of the original one (1) year warranty
period, whichever is longer.
This warranty does not apply to the defects outside of
our control, including but not limited to acts of God,
fire, flood and damage while in transit to service facility. We do not warranty that the product will be compatible with any telephone equipment, systems or party
lines.
This warranty shall be void of the product is damaged
as a result of defacement, misuse, abuse, neglect,
accident, destruction or alteration of the serial number,
improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than
our authorized service facility, or any violation of
instructions furnished by us.
This warranty is also void if this product is removed
from the country in which it was purchased by the original purchaser, if it is used in a country in which it is
Base station 1405 7101 ed1
05/10/01
10:57
Side 16
not registered for use, or if it is used in a country for
which it was not designed. Due to variations in telephone systems and communications laws, this product may be illegal for use in some countries. We
assume no responsibilities for damages or penalties
incurred resulting from the use of this product in a
manner or location other than that for which it was
intended.
FIT OR DAMAGES FOR ANY FAILURE TO PERFORM. IN NO EVENT SHALL WE BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES EVEN IF WE ARE ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may
not apply to you.
THIS LIMITED WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES EXPRESS OR IMPLIED.
ANY IMPLIED WARRANTIES INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE
DURATION OF THIS WRITTEN LIMITED WARRANTY. WE DISCLAIM ANY LIABILITY FOR DAMAGES
FOR LOSS OF USE OF THE PRODUCTS, LOSS
OF TIME, INCONVENIENCE, INJURY TO ANY
PERSON, OR DAMAGE TO PROPERTY CAUSED
BY THE PRODUCT, LOSS OF REVENUE OR PRO-
This warranty is the sole and exclusive warranty provided for the product. There are no other express
warranties. This warranty gives you specific legal rights, and you may also have other rights, which vary
from state to state.
05/10/01
10:57
1405 7101-HD, ed.1 . Reklame & Tryk A/S . 75 50 26 66
Base station 1405 7101 ed1
Side 20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 10
Create Date                     : 2001:10:05 10:59:15
Producer                        : Acrobat Distiller 4.0 for Macintosh
Author                          : Mac 3
Creator                         : QuarkXPress Passportª 4.11: AdobePS 8.7.2 (104)
Title                           : Base station 1405 7101 ed1

EXIF Metadata provided by EXIF.tools