Speed Dragon Multimedia SPEED7830 PART 15 CLASS B COMPUTING DEVICE PERIPHERAL User Manual MANL U2LAN M1 EN 280205 CE

Speed Dragon Multimedia Ltd PART 15 CLASS B COMPUTING DEVICE PERIPHERAL MANL U2LAN M1 EN 280205 CE

USERS MANUAL

Download: Speed Dragon Multimedia SPEED7830 PART 15 CLASS B COMPUTING DEVICE PERIPHERAL User Manual MANL U2LAN M1 EN 280205 CE
Mirror Download [FCC.gov]Speed Dragon Multimedia SPEED7830 PART 15 CLASS B COMPUTING DEVICE PERIPHERAL User Manual MANL U2LAN M1 EN 280205 CE
Document ID971581
Application IDxVZezn3UJ+ejhemYzXrZSg==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.92kB (23949 bits)
Date Submitted2008-07-16 00:00:00
Date Available2008-07-16 00:00:00
Creation Date2008-07-01 10:18:42
Producing SoftwarepdfFactory Pro 2.46 (Windows XP Professional Chinese)
Document Lastmod2008-07-01 18:15:39
Document TitleMANL-U2LAN-M1-EN-280205-CE.doc
Document CreatorpdfFactory Pro www.pdffactory.com
Document Author: Administrator

Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the use’s authority to
operate the equipment
FCC- Class B
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
MANL-U2LAN-M1-EN-280205
User
Manual
Introduction
This USB 2.0 Ethernet dongle is designed to offer a fully integrated, cost effective and reliable solution to users
with PC or notebook without ethernet interface.
Simply and easy to install, just install the driver and then plug the USB 2.0 Ethernet dongle to any USB 2.0 port.
No need to open the computer casing!
Features
•
Integrated USB 2.0 and Ethernet PHY single chip solution
•
Fully compliant with USB specification Rev. 2.0 and backward compatible with USB specification Rev. 1.1
•
Fully IEEE 802.3 compliant 10/100 Mbps Ethernet MAC Layer
•
Provides Half/Full Duplex operation on both 10/100 Mbps
•
Support suspend mode and remote wake-up resume
•
High-Speed (480 Mbps) data transfer rate
•
USB Bus-Powered. Draws power directly from USB port, no need for auxiliary power sources
•
Supports USB standard commands
•
Efficient TX/RX FIFO auto management
•
Back Pressure Mode for half-duplex mode flow control
•
Support wakeup frame, link status change and Magic packet events for remote wake-up
Installing Windows drivers for USB 2.0 Ethernet dongle
1. Start Windows.
2. Insert the driver CD into the CDROM drive.
3. Click on the Start button and select Run option.
4. Click the Browse button and select the CDROM drive.
5. Open MosChip folder in the driver CD.
6. Open MCS7830 folder and then Win_Drv folder.
7. Select Setup.exe and then click the Open button. Driver installation will commence.
8. You need to re-start Windows once the driver has been installed into your Windows.
9. After re-starting Windows, connect the USB 2.0 Ethernet dongle to any un-use USB 2.0 port on the computer.
10. Windows should automatically detect the USB 2.0 Ethernet dongle. Follow the instructions to complete
installing the driver.
Driver Update
You can download all the latest drivers at this website: www.moschip.com
Important Note:
In case of a high electrostatic discharge and fast transient disturbance from the power source, you may need to reset
the Ethernet dongle manually by un-plugging the Ethernet dongle from the USB port for few seconds before
plugging it again.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2008:07:01 10:18:42+08:00
Modify Date                     : 2008:07:01 18:15:39+08:00
Page Count                      : 2
Author                          : Administrator
Producer                        : pdfFactory Pro 2.46 (Windows XP Professional Chinese)
Creation Date                   : 2008:07:01 10:18:42+08:00
Mod Date                        : 2008:07:01 18:15:39+08:00
Metadata Date                   : 2008:07:01 18:15:39+08:00
Title                           : MANL-U2LAN-M1-EN-280205-CE.doc
Creator                         : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: U3P-SPEED7830

Navigation menu