Speed Queen ADE3SRGS173TW01 User's Guide User Manual DRYER Manuals And Guides 1710154L

User Manual: Speed Queen ADE3SRGS173TW01 ADE3SRGS173TW01 SPEED QUEEN DRYER - Manuals and Guides View the owners manual for your SPEED QUEEN DRYER #ADE3SRGS173TW01. Home:Laundry & Garment Care Parts:Speed Queen Parts:Speed Queen DRYER Manual

Open the PDF directly: View PDF .
Page Count: 17

Download
Open PDF In Browser	View PDF

User's Guide
for Dryers

DRY725C_SVG

Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)

www.speedqueen.com

Part No. D513218R7
July 2017

Front Matter

WARNING
WARNING
FOR YOUR SAFETY, the information in this manual
must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or
death.
W033

WARNING
• Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other appliance.
• WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use
any phone in your building.
• Clear the room, building or area of all occupants.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the
fire department.
• Installation and service must be performed by a
qualified installer, service agency or the gas supplier.
W052

DO NOT COPY or TRANSMIT

Part No. D513218R7

Product Registration

Product Registration
New owners of Alliance Laundry Systems equipment are encouraged to register their appliance to insure proper limited warranty
coverage. Register online at http://www.speedqueen.com/home/enus/support/product-registration.aspx or contact your dealer to
register your appliance. All information will be kept confidential and
will not be distributed to other parties.

DO NOT COPY or TRANSMIT

Part No. D513218R7

Table of Contents
Product Registration.......................................................................... 4
Safety Information............................................................................. 6
Explanation of Safety Messages................................................................. 6
Important Safety Instructions....................................................................6

Before Drying.................................................................................... 8
Energy Saving Tips....................................................................................8
Helps and Hints....................................................................................... 8
Sort......................................................................................................8
Load......................................................................................................8

Operating Your Dryer........................................................................ 10
Available Drying Cycles............................................................................ 10
Automatic Regular/Delicate Cycle...........................................................10
Time Dry Cycle.................................................................................... 10
Automatic Wrinkle Out Cycle................................................................. 10
Automatic Permanent Press/Knits Cycle..................................................10
To Dry Clothes....................................................................................... 10
End of Cycle Signal................................................................................. 11
Optional Drying Rack...............................................................................12

Maintenance................................................................................... 13
Lubrication........................................................................................... 13
Care of Your Dryer.................................................................................. 13
Exhaust System.................................................................................13
Motor Overload Protector........................................................................13
Lint Filter............................................................................................. 14
Optional Control Knob Inserts................................................................... 14

Troubleshooting............................................................................... 15
Contact Information............................................................................... 17

All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written
consent of the publisher.
© Copyright, Alliance Laundry Systems LLC -

DO NOT COPY or TRANSMIT

Part No. D513218R7

Safety Information

Safety Information
Explanation of Safety Messages

Important Safety Instructions

Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual
and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining
the machine.

Save These Instructions

WARNING
To reduce the risk of fire, electric shock, serious injury
or death to persons when using your dryer, follow
these basic precautions:

DANGER

W130

Indicates an imminently hazardous situation that, if
not avoided, will cause severe personal injury or
death.

•
•
•

WARNING
Indicates a hazardous situation that, if not avoided,
could cause severe personal injury or death.

CAUTION

•

Indicates a hazardous situation that, if not avoided,
may cause minor or moderate personal injury or property damage.

•

Additional precautionary statements (“IMPORTANT” and “NOTE”)
are followed by specific instructions.

•
•

IMPORTANT: The word “IMPORTANT” is used to inform
the reader of specific procedures where minor machine
damage will occur if the procedure is not followed.

•
•

NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related.

•

•
•
•

DO NOT COPY or TRANSMIT

Read all instructions before using the dryer.
Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION
manual for the proper grounding of the dryer.
Do not dry articles that have been previously cleaned in, soaked
in, washed in, or spotted with gasoline, dry-cleaning solvents,
other flammable or explosive substances as they give off vapors
that could ignite or explode. Highly flammable substances commonly used in domestic environments including acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and wax removers. This appliance
shall not be used to dry off solvents or dry-cleaning fluids.
Do not allow children to play on or in the unit. This appliance is
not intended for use by young children or infirm persons without
supervision. Young children should be supervised to ensure that
they do not play with the appliance.
Before the dryer is removed from service or discarded, remove
the door to the drying compartment.
Do not reach into the dryer if the cylinder is revolving.
Do not install or store the dryer where it will be exposed to water and/or weather.
Do not tamper with the controls.
Do not repair or replace any part of the dryer, or attempt any
servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that
you understand and have the skills to carry out.
Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener
product.
To reduce the risk of fire, DO NOT DRY plastics or articles containing foam rubber (also known as latex foam) or similarly textured rubberlike materials. Foam rubber materials can, when
heated, produce fire by spontaneous combustion.
Always clean the filter after every load. A layer of lint in the filter reduces drying efficiency and prolongs drying time.
Keep area around the exhaust opening and adjacent surrounding area free from the accumulation of lint, dust and dirt.
The interior of the dryer and the exhaust duct should be
cleaned periodically by qualified service personnel.

Part No. D513218R7

Safety Information

•

•
•

•

•
•

•

•
•
•
•
•

NOTE: The WARNING and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to
cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised
when installing, maintaining, or operating the washer.

This gas appliance contains or produces a chemical or chemicals
which can cause death or serious illness and which are known to
the State of California to cause cancer, birth defects, or other
reproductive harm. To reduce the risk from substances int he
fuel or from fuel combustion, make sure this appliance is installed, operated, and maintained according to the manufacturer's
instructions.
Dryer will not operate with the loading door open. DO NOT bypass the door safety switch by permitting the dryer to operate
with the door open. The dryer will stop tumbling when the door is
opened. Do not use the dryer if it does not stop tumbling when
the door is opened. Do not use the dryer if it does not stop
tumbling when the door is opened or starts tumbling without
pressing or turning the START mechanism. Remove the dryer
from use and call the service person.
Do not put articles soiled with vegetable or cooking oil in the
dryer, as these oils may not be removed during washing. Due to
the remaining oil, the fabric may catch on fire by itself.
To reduce the risk of fire, DO NOT put clothes which have traces
of any flammable substances such as machine oil, flammable
chemicals, thinner, etc. or anything containing wax or chemicals
such as in mops and cleaning cloths, or anything dry-cleaned at
home with dry-cleaning solvent in the dryer.
Use the dryer only for its intended purpose, drying clothes.
Always disconnect the electrical power to the dryer before attempting service. Disconnect the power cord by grasping the
plug, not the cord.
If supply cord is damaged, it must be replaced by a special cord
or assembly available from the manufacturer or its service
agent.
Install this dryer according to the INSTALLATION INSTRUCTIONS. All connections for electrical power, earthing and gas
supply must comply with local codes and be made by licensed
personnel when required. Do not do it yourself unless you know
how!
Remove laundry immediately after the dryer stops.
Always read and follow manufacturer's instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep
them out of reach of children at all times (preferably in a locked
cabinet).
Do not tumble fiberglass curtains and draperies unless the label
says it can be done. If they are dried, wipe out the cylinder with
a damp cloth to remove particles of fiberglass.
ALWAYS follow the fabric care instructions supplied by the garment manufacturer.
Never operate the dryer with any guards and/or panels removed.
DO NOT operate the dryer with missing or broken parts.
DO NOT bypass any safety devices.
Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions
which can produce bodily injury and/or property damage.

DO NOT COPY or TRANSMIT

Always contact your dealer, distributor, service agent or the manufacturer about any problems or conditions you do not understand.

Part No. D513218R7

Before Drying

Before Drying
Energy Saving Tips
•
•
•
•
•
•
•
•
•
•

2. Separate lint shedding fabrics and lint receiving fabrics. Towels,
flannels, chenille, cottons, rugs, etc., shed lint. Corduroys, knits
(including socks), permanent press, and synthetics attract lint.
3. Separate no heat, low heat and high heat items.

Make sure the lint filter is always clean.
Do not overload the dryer.
Do not overdry items.
Remove items to be ironed while still damp.
Large loads of similar fabrics dry the most efficiently. However,
dry permanent press in smaller loads to prevent wrinkling.
Use the correct cycle for the type of fabric being dried.
Locate your dryer so the exhaust duct is as short and straight
as possible.
Do not open the door during the drying cycle.
Plan to do your laundry on low humidity days; your clothes will
dry faster.
Dry multiple loads of clothes one right after another so dryer
interior does not have to be reheated for each load.

In any kind of drying, lightweight fabrics will dry faster than heavyweight fabrics. If mixed loads are dried together (such as sheets
and towels), remove the lighter weight fabrics when they are dry to
prevent overdrying and wrinkling. The best method is to dry clothes
which require the same time, temperature or dryness level in the
same load.

Helps and Hints
TLW1991N_SVG

WARNING
To reduce the risk of fire, explosion, serious injury or
death, clothes which have traces of any flammable
substances such as cooking oil, machine oil, flammable chemicals, thinner, etc. must not be put into the
dryer.

Load

WARNING
Do not wash or dry items soiled with vegetable or
cooking oils. Some oils may remain after washing and
may cause the fabric to catch on fire by itself.

W131

•
•

•
•
•
•

The directions for installation and proper exhausting are given in
the Installation Instructions which are included with the dryer.
Static electricity may cause garments of synthetic fibers (as
in lingerie) to cling together, especially if they are overdried. The
use of a liquid fabric softener in the rinse water of the washer,
or a fabric softener sheet in the dryer, will soften clothes and
reduce static electricity.
Do not wash or dry clothes that shed lint in the same load with
permanent press or knit garments.
Remove permanent press loads immediately after dryer stops.
Follow the care labels on FLAME RETARDANT, SCOTCHGUARD™, etc., garments for proper washing and drying.
If loads should be damp for ironing, use the Damp Dryness setting, in an Automatic cycle.

W527

•

•
•

•

Sort
If you have correctly sorted the items for washing, they should be
properly sorted for drying too.

Do not overload your dryer. Bulk, not weight, determines the
load size. If the dryer is overloaded, it could cause discoloration
or permanent heat damage to the load.
There should be space in the dryer for the clothes to tumble
freely and help to reduce wrinkles.
Large and small pieces together make up loads which will tumble
well. Permanent press loads should be smaller to provide room
for tumbling. Proper tumbling allows for fewer wrinkles.
A load can be too small. Just a few small pieces will not tumble
properly. They will take longer to dry and they may be wrinkled.
For small loads, add a couple of large towels or non lint shedding
items to aid in tumbling.
The following illustrations show the ideal load sizes for fabrics.
The average load will fill the cylinder one third to half full when
wet.

1. Sort by color.

DO NOT COPY or TRANSMIT

Part No. D513218R7

Before Drying

Cylinder with wet linens and cottons

DRY2031N_SVG

Cylinder with wet permanent press items

DRY2032N_SVG

DO NOT COPY or TRANSMIT

Part No. D513218R7

Operating Your Dryer

Operating Your Dryer
Automatic Wrinkle Out Cycle

WARNING

Available on Select Models Only

To reduce the risk of fire, electric shock, serious injury
or death to persons, read the Safety Information section before operating the dryer.
W520

Available Drying Cycles
NOTE: Use the automatic cycles for drying items that
can be dried wih heat. These cycles automatically dry
loads to the dryness level selected.

Use this for items that are slightly wrinkled after sitting in a dryer
or laundry basket overnight. The cycle has a short heat setting followed by a five minute COOL DOWN.

Automatic Permanent Press/Knits Cycle
Use for permanent press items and synthetics. The type of heat is
determined by selecting the proper Fabric Selector option. There
are two settings in the AUTOMATIC PERMANENT PRESS/KNITS
cycle - MAX DRY or MORE DRY (settings vary by model) and LESS
DRY.

MORE DRY will dry very small loads and some heavy items, such as
blue jeans, but will overdry lightweight items, such as sheets and
shirts. Overdrying can cause wrinkling, shrinking, excessive lint conditions, and will use more energy than necessary.

To Dry Clothes

LESS DRY, which uses the least energy, will dry large loads and
lightweight items, such as sheets and shirts, but might leave other
items, such as denim and heavy bath towels, more damp.

IMPORTANT: Before using dryer for the first time, use an
all-purpose cleaner or a detergent and water solution
and a damp cloth to remove shipping dust from inside of
dryer drum.
1. Sort items into separate loads.

To increase energy savings and to make sure loads are dried without overdrying, set your loads on LESS DRY. If items are damp at
the end of a cycle, the timer knob needs to be set closer to the
MORE DRY setting the next time these loads are dried. If items are
overdry at the end of a cycle, the timer knob should be set closer to
COOL DOWN when these loads are dried again. Remember the settings that work best to get ideal drying results.

IMPORTANT: Refer to the INSTALLATION INSTRUCTIONS before using dryer.

The COOL DOWN period at the end of each cycle provides items a
chance to tumble with no heat and cool down to room temperature.
This prevents wrinkles from setting if items cannot be cared for immediately.
NOTE: The timer knob will not advance as quickly in the
AUTOMATIC cycles as it does in the TIME DRY cycle.
The time it takes for the timer to advance depends on
the type and size of the load being dried.
The ENERGY SAVER settings, marked with a dot, show which settings will use the least energy and will leave items damp for easier
ironing.

TLW1991N_SVG

NOTE: Remove all sharp objects from laundry to
avoid tears and rips to items during normal machine
operation.
2. Clean lint filter.

Automatic Regular/Delicate Cycle
Use for sturdy items like play or work clothes and also for delicate
items. The type of heat is determined by choosing the proper Fabric
Selector option. There are three settings in the AUTOMATIC REGULAR/DELICATE cycle - MAX DRY, MORE DRY, and LESS DRY.

Time Dry Cycle
This cycle will operate dryer for up to 75 minutes. Cottons and
heavyweight items dry best between 50 and 75 minutes, and lightweight items dry best between 20 and 40 minutes.
© Copyright, Alliance Laundry Systems LLC -

DO NOT COPY or TRANSMIT

Part No. D513218R7

Operating Your Dryer

5. Select Fabric Selector (available settings vary by model). Follow
garment manufacturer's care labels for recommended tempera-

ture settings.

DRY2757N_SVG

DRY2349N_SVG

6. Select optional EXTEND TUMBLE (available on select models)
setting to continue tumbling items at no heat. This prevents
wrinkling when garments cannot be removed from the dryer immediately. By pressing the EXTEND TUMBLE button to ON, the
AUTOMATIC REGULAR/DELICATE and AUTOMATIC PERMANENT PRESS/KNITS cycles will tumble an additional 40 mi-

1. Lint Filter
Figure 1

WARNING
To reduce the risk of fire and risk of lint collecting
in exhaust duct, do not operate dryer without lint
filter in place.
W771

3. Add clothes loosely into dryer drum. Add fabric softener sheet,
if desired.
NOTE: To avoid damage to dryer, do not use more
than one fabric softener sheet per load.

DRY2032N_SVG

4. Close loading door. Dryer will not operate with the door open.

DRY2029N_SVG
nutes.
7. Select timer setting in cycle desired. These cycles control the
drying time.
The ENERGY SAVER settings, marked with an asterisk (*), show
which dryer settings will use the least energy and will leave
items damp for easier ironing.
8. Push timer knob in to start dryer.

NOTE: To stop dryer at any time, open the door or
turn timer knob to an OFF position. To restart dryer,
close door, reset timer if necessary, and push in the
timer knob.

End of Cycle Signal
Available on Select Models Only
The volume of the signal tone may be set on OFF, LOUD or between
the two selections. If a volume level is selected, the signal will let
you know when the cycle is done. The signal will stop when the door
is opened, or when the timer is advanced to an OFF position.

DRY2350N_SVG
DRY2026N_SVG

NOTE: The signal will come on every 10 minutes when
the optional EXTEND TUMBLE setting is selected.
© Copyright, Alliance Laundry Systems LLC -

DO NOT COPY or TRANSMIT

Part No. D513218R7

Operating Your Dryer

Optional Drying Rack
A drying rack, Part No. D512082, is available at extra cost
through your Factory Authorized Service Center.
The drying rack can be used in manual cycles only for no-tumble drying of articles such as tennis shoes, sweaters, stuffed toys or other delicate items.

DRY2332N_SVG

DO NOT COPY or TRANSMIT

Part No. D513218R7

Maintenance

Maintenance
Lubrication

build-up. Inspect and clean exhaust duct every one to two years as
required thereafter.

All moving parts are sealed in a permanent supply of lubricant or
are equipped with oilless bearings. Additional lubrication will not be
necessary.

NOTE: This recommended maintenance is not covered
under the terms of the warranty.

Care of Your Dryer

WARNING

The weather hood should be checked frequently to make sure the
dampers move freely, dampers are not pushed in and that nothing
has been set against them.
Keep dryer area clear and free from combustible materials, gasoline
and other flammable vapors and liquids.

To reduce the risk of an electric shock, serious injury
or death, disconnect the electrical service to the dryer
before cleaning the interior.
W132

Dryer Interior
Wipe the surfaces using a soft cloth and household cleaner or a
non-abrasive paste of powdered laundry detergent and hot water,
followed by a short heat cycle with a load of rags.

Do not obstruct the flow of combustion and ventilation air.
NOTE: Verify proper operation after servicing.

Motor Overload Protector
The dryer’s motor overload protector stops the motor automatically in the event of an overload. After cooling, the overload protector will reset itself. Dryer can be restarted by pushing the timer
knob in. If overload protector cycles again, remove the dryer from
use and call the service person to correct the problem.

To remove crayon or ball point ink off the dryer drum, put the heat
on high and use old rags in the dryer to absorb the crayon or ink. If
unsuccessful, contact the appliance dealer. DO NOT use any chemicals in the dryer.
IMPORTANT: The use of chlorine bleach for removing
any discolorations should be avoided because bleach
could damage the finish.

Cabinet
Wipe the dryer cabinet as needed. If detergent, bleach or other
washing products have been spilled on the dryer, wipe immediately.
Some products will cause permanent damage if spilled on the cabinet.

Control Panel
Use only a damp or sudsy cloth for cleaning the control panel. Some
spray pretreat products may harm the finish on the control panel.
DO NOT use products that contain alcohol on the control panel.

Exhaust System

WARNING
To reduce the risk of electric shock, disconnect the
electrical service to the dryer before cleaning.
W043

The exhaust duct should be inspected after one year of use and
cleaned if necessary by a qualified service person to remove any lint
© Copyright, Alliance Laundry Systems LLC -

DO NOT COPY or TRANSMIT

Part No. D513218R7

Maintenance

Lint Filter
The lint filter is located at the front of the dryer in the lower part of
the door opening.
CLEAN THE LINT FILTER BEFORE DRYING EACH LOAD.
Annually remove lint filter and screw to vacuum the duct under it.

DRY2757N_SVG

1. Lint Filter
Figure 2

Optional Control Knob Inserts
Your unit has come equipped from the factory with a gray background on the control panel knobs. If you wish to change the color,
additional color inserts are available at additional cost through
your dealer.

DO NOT COPY or TRANSMIT

Part No. D513218R7

Troubleshooting

Troubleshooting
Try these troubleshooting tips before making a service call. They
may save you time and money.
Dryer Symptom
Dryer won’t start

Possible Cause/Solution
•
•
•
•
•
•

Dryer won’t heat

•

•
•
•
•
Dryer doesn’t dry clothes satisfactorily

•
•
•
•
•
•
•
•

For dryers equipped with a power cord, make sure the power
cord is plugged all the way into the electrical outlet.
Make sure loading door is closed.
Push timer knob in to start dryer.
Make sure the laundry room fuse(s) isn’t blown or loose, or circuit breakers aren’t open.
The dryer itself does not have an electrical fuse. An electric
dryer has an electrical circuit with two fuses.
Check if motor overload protector has cycled. Wait 10 minutes
and try again.
Make sure timer is not in COOL DOWN, COOL TUMBLE or EXTENDED TUMBLE settings or that Fabric Selector is not set at
NO HEAT.
Electric dryers only – Some homes may have two fuses or circuit breakers for an electric dryer; both fuses or circuit breakers should be checked. Make sure the laundry room fuse(s) isn’t
blown or loose, or that the circuit breakers aren’t open.
The dryer itself does not have an electrical fuse. An electric
dryer has an electrical circuit with two fuses.
Gas dryer only – Make sure equipment and main gas line valve is
turned on.
Check exhaust duct to outside to see if it is kinked, blocked or
needs cleaning.
Check weather hood to make sure flapper moves freely, has not
been pushed in or has not been blocked.
Check exhaust duct to outside to see if it is kinked, blocked or
needs cleaning.
Check weather hood to make sure flapper moves freely, has not
been pushed in or has not been blocked.
Automatic cycle – Adjust to MAX, MORE or LESS DRY setting.
Timed cycle - Allow more or less time.
Clean the lint filter.
Make sure the load isn’t too small. Small loads may not tumble
properly or dry evenly.
Check load being dried. Heavy items dried with lightweight
items will not dry as quickly as the rest of the load.
Refer to Sort section for proper sorting information.

Table continues...

DO NOT COPY or TRANSMIT

Part No. D513218R7

Troubleshooting

Dryer Symptom
Dryer is noisy

Possible Cause/Solution
•
•
•

Check dryer for foreign objects (nails, coins, bobby pins, metal,
plastic toys, etc.). Remove items from dryer.
Make sure dryer is level. Uneven leveling can cause vibration.
Normal operating sounds include the tick of timer advancing,
heat source going on and off, and humming of air moving
through the dryer and exhaust system.

Clothes are too wrinkled

•
•

Check heat setting. Overdrying can cause wrinkling.
Check load size. Large loads may not tumble properly and may
cause wrinkling.

Clothes have odor

•

Check room for odors before drying clothes. Any odor (fried
foods, paint, varnish, cleaners, burning wood, etc.) will transfer
to clothing as the dryer draws air from the room.
Ventilate room before drying clothes.

•
Cycle advances too slowly

DO NOT COPY or TRANSMIT

•

Automatic cycles advance slower than the Time Dry cycle.
When in an Automatic cycle, the time it takes for the timer to
advance depends on the type and size of the load being dried.
When clothing has more moisture, the timer advances slower
than when the clothes are more dry.

Part No. D513218R7

Troubleshooting

Contact Information
If service is required, contact the nearest Factory Authorized
Service Center. To find the nearest service center, visit us online at
www.speedqueen.com.
If you are unable to locate an authorized service center or are unsatisfied with the service performed on your unit, contact:

P.O. Box 990
Ripon, Wisconsin 54971-0990
www.speedqueen.com
Phone: (920)748-3121
Date Purchased __________________________
Model Number __________________________
Serial Number __________________________

Speed Queen
Shepard Street

DRY2690N

1. Serial Plate
When contacting us about your washer, PLEASE GIVE THE MODEL
AND SERIAL NUMBERS. The model and serial numbers are located
on the serial plate. The serial plate will be in the location shown.
Please include a copy of your bill of sale and any service receipts you
have.
If replacement parts are required, contact the source from where
you purchased your washer or visit us online at www.speedqueen.com.

WARNING
To reduce the risk of serious injury or death, DO NOT
repair or replace any part of the unit or attempt any
servicing unless specifically recommended in the
user-maintenance instructions or in published user-repair instructions that you understand and have the
skills to carry out.
W329

DO NOT COPY or TRANSMIT

Part No. D513218R7

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Alliance
Create Date                     : 2017:07:25 16:19:47Z
Modify Date                     : 2017:08:02 11:05:59-05:00
Language                        : EN
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : Alliance
Title                           : User's Guide
Creator Tool                    : AH XSL Formatter V6.3 MR1 for Linux64 : 6.3.2.23978 (2016/03/18 11:26JST)
Metadata Date                   : 2017:08:02 11:05:59-05:00
Producer                        : Antenna House PDF Output Library 6.3.762 (Linux64)
Trapped                         : False
Document ID                     : uuid:6bac4b43-5790-4bbf-8e6f-fadc39bd84b1
Instance ID                     : uuid:fcd0e5fe-b12f-4362-a611-2c5759d37d0c
Page Mode                       : UseOutlines
Page Count                      : 17

EXIF Metadata provided by EXIF.tools

Speed Queen ADE3SRGS173TW01 User's Guide User Manual DRYER Manuals And Guides 1710154L

Navigation menu

Versions of this User Manual:

Views

Navigation