Spheris Digital PXT51012 WIRELESS DIGITAL DISPLAY User Manual USERS MANUAL

Spheris Digital Ltd. WIRELESS DIGITAL DISPLAY USERS MANUAL

USERS MANUAL

   Wireless   Digital Picture Frame    User Guide / Livret Utilisateur Manuale del Utilisator / Benutzerhandbuch Guia do Utilizador / Guía del Usuario         2012-06
  1   Welcome You have just acquired a Pix-Star® Wi-Fi Photo Frame and we thank you very much for your trust in our product and solution.    This  Digital  Photo  Frame  is  a  totally  new  generation  of  product  with  wireless  capabilities  and innovative features that we believe will delight you.    This product will allow you to easily share your best moments with friends and family in just a few seconds wherever they are, at any moment. This product also includes the traditional features of a Digital Photo Frame: it can display pictures and other media files from USB memory sticks and compatible memory cards.    We hope you will enjoy using our product. Do not hesitate to send us your feedback and suggestions by logging on our web site at www.pix-star.com.    Notice: This user guide has been simplified to enable you to understand the basic features of this frame. Nevertheless these explanations may not be exhaustive due to the constant improvements made to your Pix—Star® product. Therefore, we recommend that you check the BLOG and other sections of our website at www.pix-star.com where you can find regularly updated information. You can also send us an email to info@pix-star.com.      REGISTRATION  To register your Pix-Star Online now, simply go to www.pix-star.com, and click on "I want to choose an email address for my Pix-Star!" you will be able to instantly send/receive pictures to/from your friends and relatives!  Enjoy your Pix-Star®
  2     Recommendations of Use and Safety Warnings Do not install your Digital Picture Frame close to a water source (minimum 1.50 m away from a water source) or in a humid environment (such as bathroom, laundry, kitchen).  This product has been designed to work inside a room or a house and cannot be used outside. Avoid using the product in a dusty environment.    This product must be used in temperatures between 10 °C and 35 °C.    Only use this product with the power adapter that was provided with the product.    The  CE  mark  indicates  that  the  product  is  in  compliance  with  the  main  requirements  of  the European  parliament  and  council  directive  2002/96/EC  for  telecommunications  terminals,  user health and safety and for electromagnetic disturbance.    This terminal has been designed for private, indoor use (CPE customer premises equipment) within the European Union. It has been tested according to the technical dispositions for radio equipment (EN 300328). The manufacturer therefore declines all responsibility in case of non-compliance with the current regulations in the country of installation.     The declaration of conformity and the warranty are accessible at www.pix-star.com or you can request them by sending an email to support@pix-star.com.
  3 ! Scroll the menu up  1. Overview of the device                                            CAUTION  In cases of inappropriate handling the battery might explode.   Do not attempt to recharge it, disassemble it or burn it.    Play/pause when in slideshow mode To enter a sub-menu in menu mode To confirm the selection  Move left in the menu mode Move to previous picture in slideshow mode  Move right in the menu mode Move to next picture in the slideshow mode  Move up in the menu mode  Move down in the menu mode  Share: Open the user interface to send/share pictures   Inbox: Open the inbox to view pictures received by email  Switch On/Off the LCD (Standby mode)   To move back to previous menu in menu mode To quit the slideshow when slideshow is playing  Display slide show menu bar (when slideshow is playing) Display main menu  !!    !   !  !  !            Box contains: - 1 x remote control - 1 x user manual - 1 x Pix-Star photo frame - 1 x power adaper AC 100/220V  Note: the remote control is delivered with a 3V lithium battery (type CR2025) already installed. Remove the plastic tab (if any) to start using the remote control.   ATTENTION: this battery cannot be recharged!     Menu défiler droite OK / Select SD card reader ! Scroll the menu left Menu défiler bas    Power on/off   Go back AC adapter port Main menu USB port !Scroll the menu down ! Scroll the menu right
  4  2. Installation and Power On   First,  plug  the  AC  adapter  at  the  back  of  the  device,  then  plug  the  AC  adapter  to  a  power outlet/socket.    To turn on the device, move the switch button located on back/bottom side of the device next to the AC adapter plug. After a few seconds, the screen should display a logo.    Wait for about 30 seconds for the device to be ready for use.  3. Introduction to the Main User Interface   After you power on the device and wait for approximately 30 seconds your Pix-Star will display the main menu.  You can navigate the menus using the remote control or the buttons located behind the device on the right side.    When the slide show is playing, to quit the slide show and go back to the main menu press the Back  button or the Menu button twice.    When the main menu is displaying on the Pix-star’s screen, select the menu you want to enter using the UP and DOWN buttons then press the   / OK button to enter it.  Note: The Back   button on the remote control allows you to go back to the previous menu (upper level menu)
  5  4. Wi-Fi and Internet Setup    4.1 Connect the device to a Wi-Fi wireless network    Each device has a dedicated email address, which makes it possible for the device to receive pictures directly from the Internet. To receive pictures, the device must be connected to the Internet through a Wi-Fi gateway.    Here is how to connect your photo frame to a local Wi-Fi network:    First access the Main menu (quit the slide show if necessary). Scroll to Settings and press Menu or "    " this will enter the Settings menu. Then scroll to Wi-Fi settings and press "   ".    The device will automatically start a scanning process to discover available wireless networks.    Using  the  UP and  DOWN keys  navigate the  interface  to  select  the  Wi-Fi  network  you  want  to connect to. Once selected just press the    button to connect to this network.    If the network has its security enabled, the device will automatically pop up a window where you can enter the security key. All other parameters are AUTOMATICALLY configured by your Pix-Star.  Note: A DHCP server must be running on your network in order to automatically assign an IP address to your device. Most personal Wi-Fi networks run a DHCP server.
  6 4.2 Register and Manage the Device on the WEB   First-time users should register their frame online by following these instructions:    Go  to  the  www.pix-star.com  webpage  and  click  on  “I  want  to  register  and  choose  an  email address for my Pix-Star®”.    Complete the form, choose a password and an email address you want to assign to your device, and your device will be ready to use!    You can find the device ID (serial number) by accessing the Settings -> About Information menu on your device.     5. Receive Pictures by Email Directly on the Device To add a picture to your device, simply send an email with a picture attachment directly to your device’s email address.  When the device receives a new picture, a small “enveloppe” icon will be displayed on the upper right side of the screen. You can open the picture from the inbox by going to the main menu then select the line where the “new message” display. You can also press the dedicated inbox button on the remote control at the bottom right.  You can then choose to keep or delete the picture(s). If you delete a picture on the frame, it will still  be  backed  up  on  the  website.  Therefore,  you  will  be  able  to  view  it  or  remove  it permanently by accessing the web site.    Note 1: You can send several pictures with the same email but you must ensure the email size does not exceed 20 MB.  Note 2: You can configure FILTERS on incoming emails to select which person is allowed to send photo-mails to your Pix-Star. To manage and configure the filtering options, log into your account at www.pix-star.com.  On the frame, by  going to the SETTINGS menu, then SYSTEM menu, you can configure the way Pix-Star handles incoming photo-mails. You have the following choices:  - Manual (default option)  In this mode, when a new photo-mail arrives, your Pix-Star displays an icon (“envelope”) on top  of  the  slide  show  and  a  message  on  the  main  menu.  You  can  manually  open  the photo-mail by pressing the   button at the bottom right of the remote control. This button opens a window that displays photos individually, and provides the sender’s email address, date and time (GMT format) and the subject of the email.    The manual  mode  is  very  convenient  for providing full  control on incoming photo-mails, especially since you can immediately decide which photos you want to KEEP or DELETE.  - Automatic with notification  In this mode the device AUTOMATICALLY accepts photo-mails.    Photo-mails  open  one  by  one  and  the  attached  pictures  are  displayed  for  10  seconds, accepted then stored in the local memory of your device.
  7 This mode is particularly suited for users who want simplicity, as it does not require much interaction with the device.  - Automatic  This  mode  is  the  same  as  “automatic  with  notification” except  that  the  device AUTOMATICALLY  accepts  photo-mails WITHOUT previewing  them  on  the  screen  for  10 seconds (photo-mails are added locally in a silent mode)  This mode is particularly suited for users who want simplicity, as it does not require any interaction with the device.  Note: Once accepted, the photos arriving by email are stored in the “MY LOCAL PICTURES” menu then “PIXSTAR” and “INBOX” sub menus.   6. Share Pictures with Friends Directly on the Device The device allows you to easily share your pictures with your friends. To do so, press the   button while the picture in question is being displayed. Then, a menu will appear, which will include the following options:    -To  my  friends:  This  item  is  linked  to  your  contact  list,  as  stored  on  the  www.pix-star.com website. You can quickly send pictures to all your friends or friends’ photo frames by selecting them. If you want to modify your contact list, you need to log in the web site.  -To web albums: By choosing this option, the picture will be sent to a specific web album that can be accessed through your personal area on the www.pix-star.com web site.    -To another email: This option allows you to send the picture to another device or email address. You will then need to enter the recipient’s complete email address.     7. View Online Albums with the device  The  device  can  display  a  slide  show  of  pictures  you  stored  online  in  your  album  via  the www.pix-star.com web site.    To manage the device associated with each of your online albums, log on to your personal area on the www.pix-star.com web site. Choose the “My  web albums” menu  to  upload or  delete albums.  You  can  also  use  the  same  menu  to  define  which  album  will  be  displayed  on  your device.  Once the pictures have been uploaded onto the web site they can be seen and manipulated immediately, and they should be visible on the device in less than a minute.    When in web album slide show mode, the device will automatically and periodically synchronize its content with the web site.    When a picture is added to the online web album, the device will later add it onto its local memory and slide show. When a picture is removed from the online web album, the device later removes it from its local memory and slide show.  You  can  access  pictures stored in  your online  albums  from  a large variety of  providers such  as Picasa, Facebook, Smugmug, Shutterfly, FlickR, Mobile Me, Photo RSS, Padeleon, Koffeephoto, etc.
  8 To configure Pix-Star so that it can access photos from these providers, you must log into your account at www.pix-star.com  Support  for  new  online  providers  is  added  regularly.  We  invite  you  to  contact  us  at support@pix-star.com if  you  want  a  specific  provider  to  be  added.  You  can  also  log into  your account at www.pix-star.com to see new additions.   8. Access pictures stored inside UPnP/DLNA servers on the local network  This device is UPnP/DLNA compatible, which makes it possible to access photos stored on the local network inside a “UPnP/DLNA servers” directly from the device itself without copying the pictures inside it’s local memory.  To access your UPnP/DLNA server content from the device go to the “My Local Pictures” menu then choose “My Network Devices”. The device will automatically scan for devices on the network and display a list of those supporting UPnP/DLNA (Note: Make sure your Wi-Fi connection is configured properly before entering this menu).  Once a UPnP/DLNA server is found you will see it on the device menu, just select it then enter the menu to browse its content and launch a slide show of the selected folders.  When playing a slide show of a UPnP/DLNA source the pictures are pulled out from the server in streaming mode so it is necessary to keep the UPnP/DLNA server running so that the device can play the slide show without interruption. Also, the Wi-Fi needs to be constantly available.  Note: Some UPnP/DLNA servers need a special configuration in order to work properly with the device. Do not hesitate to check our BLOG where some explanation are provided or directly contact us by email at info@pix-star.com.   9. How to Use the Web Site  -How to select the weather forecast for specific cities and countries  The web site allows you to determine which weather forecasts will be displayed on your device. Under “Weather Forecast”, each city will be listed by country. By accessing “My weather”, you can choose to display several cities and countries in the same directory.  Your weather forecasts will be accessible on your device by selecting “My web albums” (main menu).    -How to manage your contacts    You  can  use  the  www.pix-star.com  web  site  to  add  contacts  and  create  a  contact  list  directly accessible from your device. It will allow you to send email to your friends from your photo frame, without having to  enter email addresses on the frame. You can  easily modify, add  or delete a contact on this list.    Moreover, you can create groups, and  instantly send your favourite photos  to all members of  a specific group.  -How to filter your emails    You  may  choose  to filter through  all  incoming  emails to  better control  who  is allowed  to send pictures to your Pix-Star® photo frame. You can choose one of the following options:
  9  o No filtering - THIS IS THE DEFAULT MODE   Anyone who knows your Pix-Star® email address can send pictures to your photo frame.  o Refuse  all incoming  emails  except  those  coming  from  your  “white  list”  (authorized individuals)    o Accept  all incoming  emails  except  those  coming  from  your  “black  list”  (unauthorized individuals)   10. How the Slide show works  The slide show can run in 2 different modes: the “Normal Mode” and the “Collage Mode”.  By  default  “Collage  Mode”  is  activated.  When  a  slideshow  starts,  whether  automatically  are launched from any menu of the device, it will display 5 pictures at a time in a nice “collage” type arrangement on the screen.  At any time when Collage Mode is playing you can press any key on the remote to quit this Collage Mode and return to the Normal slide show mode where pictures are shown individually in full screen (one picture at a time).  To launch the Collage Mode again it is necessary to quit the normal mode and the slide show and return to the main menu. From here, the slideshow will start in Collage Mode again next time it auto starts or if you start it manually.  Should you decide to disable the Collage Mode and run slideshows using normal full screen mode, go to the Settings menu then SYSTEM menu. You can also change this option from the menu bar that is accessible from the slide show by pressing the MENU button of the remote.   11. How to Change the Device Configuration  You can change most of the device configuration parameters from the Settings menu accessible from the Main menu.  Once inside the Settigns menu, you can change:  - The language of the user interface; - Adjust the date and time; - Adjust the auto switch on and switch off configuration; - Change the Wi-Fi configuration; - In the menu System you can also choose how photo-mails are handled as well as activate and desactivate the slide show collage mode and adjust the screen brightness.  There is another Menu that you can access from the slideshow that is dedicated to adjusting the slide show parameters.    When a slide show is running, press the MENU button of the remote, on the left side a list of icons displays, choose the 2nd one from the bottom called “OPTIONS”.    Here you can adjust:  - The type of transitions you want between pictures; - The play mode, normal mode or random mode; - The screen brightness;
  10 - The time intervals between 2 pictures; - Set the current picture as your wallpaper of the main menu; - Configure whether to display or not the date and time on top of the slide show; - Activate or deactivate the “Collage Mode”.   12. Overview of Other Features    The device includes the following useful features:    - Pause   The  device  usually  displays the  pictures as  an  automatic  slide  show.  However,  if  you  want  to display a single static picture, you can interrupt the slide show by choosing the Pause button (main menu). To display the slide show again, select Play.    - Settings   Several options can be modified from the Settings menu.    - Removable Devices   The device can read pictures stored on an SD card or USB memory stick. Plug one of them in the device, select the right storage area in the files manager menu and browse the directories to find the one that includes your pictures, then click to display a slide show composed of those pictures.    - Picture Management   The  device  allows  you  to  manage  your  pictures.  Enter  the  Files  Manager  menu  and  select  the location of your pictures. Then, you can perform several actions including delete and copy.     13. Technical Specifications                                Data provided for reference purposes only.   The manufacturer reserves the right to modify the specifications without any prior notice.   Format supported  Images – JPG, JPEG, BMP, PNG, GIF  Memory card  SD / SDHC / MMC  USB  USB memory sticks  Storage capacity  1.3  GB  total  available  memory  for picture  storage.  This  is  up  to  12000 pictures (depending on picture size)  Energy consumption  Max. 7W
  11 14. Glossary of Menu Icons                     15. Glossary of the Slideshow Menu Bar Icons  When a slideshow is playing on your pix-star you can press the MENU button on the remote control to display the slide show menu.    PROBLEM! Not connected to a Wi-Fi network.   Check the Wi-Fi connection configuration and ensure the Wi-Fi network is available.  Connected to a Wi-Fi network with WEAK signal.    Connected to a Wi-Fi network with STRONG signal.    PROBLEM! The frame cannot access the Internet This usually happens when the Wi-Fi is not properly configured or the internet connection of your Wi-Fi gateway is down.  Connection to the Internet is working properly. The device is ready to receive / send email and synchronize web albums.  Notification  that  the  Pix-Star® photo  frame  has  received  new photo email.  SD/SDHC/MMC card detected and ready to use    USB device detected and ready to use    Send photo email  Next photo  Play slide show (when in Pause)  Pause slide show (when Playing)  Previous photo  Rotate photo  Delete this photo  Photo thumbnail  More options (configure the slide show)  Close and go back to Main Menu
  12 16. Frame Map  My local albums - My Pix-Star® frame (Inbox)  Display the photos of your friends sent by email or transferred via SD card or USB stick.  My web albums - +WEATHER+ - Ezubi - Facebook - FlickR - Kotoo - MobileMe - Padeleon - Phanfare - Photobucket - Photo RSS - Picasa - Pix-Star® - Shutterfly - Signaelive - SmugMug - XiaoNei - WindowsLive  Manage web albums displayed on your frame via the www.pix-star.com web site.    Web albums will only be displayed after being linked on the web site.  Files manager - My Pix-Star® - USB - Carte SD  Manage  files  saved  on  your  device’s  local memory.  Settings  - Language      - Date & Time      - Auto On/Off     - System    - Wi-Fi          - About  - Reset        Configure the language used on the device  Configure the date and time    Configure your device’s automatic sleep mode    Configure your device’s settings  Select your wireless network  Information related to the device  Reset the device to factory settings
  13 17. File Manager  - How to create a new folder in a directory  Choose  a  location  where  you  want  to  add  this  folder,  press  the  “Menu”  button  on  the  remote control, and then select “New folder”. A pop up will appear and ask you to choose a name for this new folder.  - How to copy a file in another folder  Select the files you want to copy by pressing the central button on the remote control ( ) when the file is selected using arrow keys.  Press the “Menu” button on the remote control, and select “copy selected files to…”. An interface will open that help you select the destination folder.  - How to delete a file  Select the file(s) you want to remove with the central button of the remote control ( ), press “Menu”, and “Delete files”.  18. Warranty  The warranty does not cover damage caused if you (or any unauthorized person) tried to repair the frame.  If the frame is emitting smoke, noise, or an unusual smell, immediately turn it off and unplug it. If you do not use the digital frame for a while, make sure to unplug the power cord.  The warranty concerns the digital photo frame and the following accessories:  - The power supply unit - The remote control  In case of any of these accessories stop working you may contact the following email address for a diagnostic or to replace them: SUPPORT@PIX-STAR.COM  Warranty period This digital frame is under warranty for 12 months. The warranty period begins on the date the frame is purchased. The warranty must be proven by presenting the original invoice or receipt on which the date and model purchased appear.  Coverage A defective digital frame must be returned complete to your distributor with an explanation. If  this  digital  frame  presents  a  defect  during  the  warranty  period,  the  authorized  After-Sales Service will repair any defective component or manufacturing defect. The After-Sales Service will unilaterally decide whether to repair or replace the digital frame, in part or in whole. The initial purchase date will determine the starting date for the warranty period. If the digital frame is repaired or exchanged by our After-Sales Service, the warranty period is not extended.  Exclusions Damage or defects caused by the improper use or handling of the digital frame, or by the use of accessories, which are not original or not recommended in these instructions, are not covered by the warranty
  14 The warranty does not cover damage caused by outside elements, like lightning, water, or fire, or any other damage caused during transport.  No  warranty  coverage  may  be  claimed  if  the  digital  frame’s  serial  number  has  been  modified, removed, erased, or made illegible.  No warranty coverage may be claimed if the digital frame has been repaired, altered, or modified by the buyer or any repair personnel not officially qualified and authorized.  The  manufacturer  does  not  guarantee  the  technical  properties  described  in  this  manual.  The hardware and accessories described in this manual are subject to change without advance notice. For this reason, the manufacturer reserves the right to change the related documents, components, options, and characteristics without advance notice.   19. Declaration of Conformity  We, Spheris Digital Ltd., declare under our sole responsibility that the product PXT510WR02B is in conformity  with  the  provisions  of  the  Council  Directive  on  Radio  Equipment  and Telecommunications Terminal Equipment.    The product is marked with the CE making    Environmental protection You are suggested to return your frame at the end of its live to the public collecting points set up for recycling, reusing electrical and electronic devices.   The following symbol on the product, the instruction manual or the package  indicates that this product is subjected to the European Directive 2002/96/EU.     Spheris Digital Ltd.     Info@pix-star.com      www.pix-star.com
  15 FCC WARNING STATEMENT     FCC NOTE:   THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:    1. This device may not cause harmful interference, and    2. This device must accept any interference received, including interference that may cause undesired operation.    Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.    This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.    These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:    —Reorient or relocate the receiving antenna.   —Increase the separation between the equipment and receiver.   —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   —Consult the dealer or an experienced radio/TV technician for help.
  16     Bienvenue ! Vous  venez  d'acquérir  un  cadre  photo  numérique  Pix-Star® et  nous  vous  remercions  pour  la confiance que vous nous accordez.    Votre Pix-Star® appartient à la nouvelle génération des cadres photos numériques communicants dotés de capacités de connexion Internet sans fil.  Avec ce cadre numérique vous pourrez très facilement, via Internet, partager des photos avec vos amis et les membres de votre famille, recevoir directement des photos par e-mail sur le cadre, ou encore accéder à vos photos stockées en ligne. Vous pourrez aussi utiliser des fonctionnalités plus classiques, comme la lecture de photos numérique stockées sur un support de type carte mémoire SD ou une clé USB.    Nous espérons que vous apprécierez ce produit. N'hésitez pas à nous faire part de votre avis et de vos suggestions d'amélioration via notre site www.pix-star.com.  Remarque: Ce manuel d'utilisation est un guide simplifié des fonctionnalités de base de votre cadre Pix-Star®. Cependant, en raison de l'amélioration constante de nos services, certaines informations peuvent être manquantes aussi n'hésitez pas à vous rendre sur www.pix-star.com dans les rubriques BLOG et FORUM où vous trouverez des informations régulièrement mises à jour. Vous y trouverez également  la  garantie  du  cadre.  Vous  pouvez  aussi  bien  sûr  nous  contacter  par  l'email info@pix-star.com.   ENREGISTREMENT Pour  enregistrer  dès  maintenant  votre  Pix-Star® en  ligne,  rendez  vous  sur www.pix-star.com  et  sélectionner  "Je  veux  enregistrer  et  choisir  une  adresse Email pour mon Pix-Star !" Vous aurez alors la liberté de recevoir et d'envoyer instantanément vos photos à vos amis et proches.   Bon Pix-Star®
  17      Recommandations d'utilisation et avertissements de sécurité  Ne pas installer le cadre numérique à proximité d'une source d'eau (laisser au minimum 1,50m de distance  entre  le  cadre  et  toute  source  d’eau  potentielle)  ou  dans  un  environnement  humide (cuisine, salle de bain, etc.)   Ce  produit  a  été  conçu  pour  fonctionner  en  intérieur  et  ne  peut  en  aucun  cas  être  utilisé  en extérieur. Éviter d'installer le produit dans un environnement poussiéreux ou en plein soleil.   Ce produit doit être utilisé à une température située entre 10°C et 35°C.   Utiliser le cadre photo uniquement avec l'adaptateur secteur fourni.   Le marquage CE indiqué sur le produit et sur l'emballage certifie que ce produit est compatible avec les  exigences  de  la  directive  européenne  2002/96/EU  concernant  les  équipements  de communication, la sécurité et la santé des usagers, et pour les perturbations électromagnétiques.    Ce terminal a été conçu pour un usage privé au sein de l'Union Européenne. Il a été testé selon les dispositions techniques  pour  les  équipements  radio  (EN  300328).  En  conséquence,  le  fabricant décline  toute  responsabilité  en  cas  de  non  compatibilité  avec  les  règles  locales  dans  le  pays d'installation.     La déclaration de conformité peut-être consultée sur notre site web www.pix-star.com et peut être obtenue sur simple demande en envoyant un e-mail à support@pix-star.com.
  18 ! Menu défiler haut 1. Description du produit                               AVERTISSEMENT En cas de mauvaise manipulation, la pile peut exploser. Ne tentez pas de la recharger, de la démonter ou de la jeter au feu.  Arrêter/ démarrer le diaporama Entrer dans le sous-menu sélectionné   Valider la sélection  Touche de navigation à gauche dans le menu Afficher la photo précédente dans le mode diaporama  Touche de navigation à droite dans le menu Afficher la photo suivante dans le menu diaporama  Touche de navigation vers le haut dans le menu    Touche de navigation vers le bas dans le menu  Fonction « Partage » de photos et ouverture de la liste de contacts  INBOX : Fonction « Réception » de photos et ouverture de la boîte de réception pour afficher les photos reçues par e-mail  Eteindre / Allumer l’écran (mode stand by) Note : pour éteindre ou allumer l’appareil, utiliser le bouton situé sur le côté   Revenir au menu précédent dans le mode menu  Afficher le menu associé au diaporama (en mode diaporama) Afficher le menu principal (en mode menu) Sont inclus dans le boitier : - Un adaptateur secteur AC 100/220V - Une télécommande - Un cadre photo numérique - Un guide de démarrage  Note: La télécommande est livrée avec une pile au Lithium de 3 Volts (type CR2025).. ATTENTION: Cette pile ne peut pas être rechargée!   Menu défiler droite OK / Sélectionner Port carte SD ! Menu défiler gauche   Menu défiler bas    Allumage / Exctinction  retour Adaptateur secteur Menu principal Port USB !Menu défiler bas ! Menu défiler droite   !!    !   !  !  !
  19 2. Installation Brancher l'adaptateur secteur à l’arrière de l'appareil. Raccorder ensuite l'adaptateur sur la prise secteur.    Pour mettre en route le cadre, appuyer sur le bouton situé à l’arrière du cadre. L'appareil démarre, au bout de 2 secondes, l'écran s'allume, il est opérationnel au bout de 30 secondes environ.    3. Présentation de l'interface principale   Environ 30 secondes après la mise en route de l'appareil, votre Pix-Star affiche le menu principal. Puis au bout de 20 secondes environ le diaporama démarre automatiquement. En utilisant les boutons situés à l'arrière de l'appareil, vous pouvez naviguer à l'intérieur des menus. Pour ouvrir le MENU  principal, appuyer sur le  bouton « menu ». Pour entrer  dans le sous-menu souhaité presser la touche "  ".   Pour quitter le mode diaporama et revenir au menu principal, utiliser la télécommande et appuyer sur la touche   ou deux fois sur la touche MENU.          Remarque : A tout moment, appuyer sur la touche   pour revenir au menu précédent.
  20 4. Configuration de la connexion Wi-Fi et du compte utilisateur    4.1 Connexion de l'appareil au réseau Wi-Fi   Chaque appareil dispose d'une adresse e-mail qui lui est propre, ce qui lui permet de recevoir et d’envoyer directement les photos via le réseau Internet.  Pour pouvoir se connecter au réseau Internet, Pix-Star utilise le réseau sans fil Wi-Fi . Il est donc nécessaire de disposer d'une borne Wi-Fi, de la relier à Internet et de configurer la connexion Wi-Fi entre l'appareil et cette borne Wi-Fi .    Pour cela appuyer sur le bouton « Menu » pour accéder au menu principal. Choisir le sous-menu "Configuration" et presser la touche  . Choisir ensuite le menu « Wi-Fi » et presser  .    L'appareil commence alors une recherche automatique des réseaux Wi-Fi disponibles.                              Choisissez alors le réseau Wi-Fi auquel vous voulez connecter votre Pix-Star puis appuyer sur la touche de confirmation  .  Si votre réseau Wi-Fi est en mode sécurisé (clé WEP ou WPA), Pix-Star vous demandera alors d’entrer la clé de sécurité, les autres paramètres sont configurés AUTOMATIQUEMENT.   4.2 Configuration du compte utilisateur, enregistrement du produit (première utilisation)  Lors de la première utilisation, il est nécessaire de créer un compte, une adresse e-mail associée au produit et de s'enregistrer sur le site web www.pix-star.com en allant dans le lien situé sur la page d'accueil. Il vous y sera demandé le numéro de série de l'appareil, qui figure au dos du produit ou dans le menu « Configuration » puis le sous-menu « A propos ».  Wi-Fi   Remarque: Un serveur DHCP doit être activé sur votre borne Wi-Fi afin d'affecter automatiquement une adresse IP à votre appareil. La plupart des réseaux Wi-Fi en sont équipés.
  21  5. Réception de photos par e-mail directement sur l'appareil  Pour incorporer des photos dans la mémoire du cadre afin qu'elles apparaissent dans le diaporama principal vous pouvez les envoyer via e-mail. Pour cela, envoyer un e-mail à l'adresse du cadre avec les photos que vous souhaitez inclure au diaporama en fichier joint, c’est un « photo-mail ».  Votre entourage peut donc envoyer des photos très facilement sur votre cadre par e-mail. Pour cela, il vous suffit de leur communiquer l'adresse e-mail associée à votre Pix-Star® que vous avez choisi  au  moment  de  l’enregistrement  de  votre  cadre  sur  www.pix-star.com (par  exemple : pierre@mypixstar.com).  Lorsqu'une nouvelle photo arrive par e-mail sur l'appareil une petite icône apparaît en haut à droite de l'écran.    Pour ouvrir la boîte de réception et ainsi afficher les photos recues par photo-mail appuyer sur la touche de réception en bas à DROITE de la télécommande ou aller sur le lien qui s’affiche dans le menu principal.  Les images reçues apparaissent les unes après les autres et vous pouvez choisir de les conserver ou de les effacer. Si vous choisissez d'effacer une image sur le cadre, celle-ci n'est pas perdue car elle reste stockée sur le  site web et vous pourrez la visionner ou la décharger à nouveau en vous y connectant.  Les  photos  que  vous  conservez  seront  automatiquement  stockées  dans  le  menu  « Mes  albums locaux » puis le sous-menu « PIXSTAR / INBOX ».      Il  est  aussi  possible  de  configurer  l’appareil  pour  que  les  photo-mails  soient  acceptés AUTOMATIQUEMENT grâce aux modes « automatique » et « automatique avec alerte ».    L’utilisation  de  ces  deux  modes  automatiques  est  particulièrement  recommandée  pour  les personnes souhaitant n’avoir pas à interagir avec l’appareil lorsqu’un photo-mail arrive et voulant le maximum de simplicité.  En allant dans le menu CONFIGURATION puis le sous-menu SYSTEME le premier menu permet de choisir entre 3 modes pour la gestion des photo-mails recus par l’appareil :  - Manuel (mode par défaut)  Dans  ce  mode,  lorsqu’un  photo-mail  arrive  dans  l’appareil,  celui-ci  affiche  une  petite envelope en haut à droite de l’écran du diaporama. Vous devez alors manuellement ouvrir ce photo-mail en appuyant sur la touche dediée de la telecommande (en bas à droite). Une fenêtre s’ouvre qui affiche la photo recue et vous propose, soit de la conserver, soit de l’effacer, cet écran indique aussi l’email de la personne qui l’a envoyée, la date et l’heure (GMT) et le sujet du mail.  Ce mode est particulièrement intéressant pour garder un control total sur les photo-mail entrant et ainsi décider au fur et à mesure qu’ils arrivent de les conserver ou de les effacer immediatement.  - Automatique avec alerte  Dans ce mode l’appareil accepte automatiquement les photo-mails entrant.  Remarque: Vous pouvez mettre plusieurs photos en pièce jointe des e-mail envoyés vers votre Pix-Star, mais il est préférable toutefois que le total des fichiers joints ne dépasse pas 20 MB.
  22 Lorsqu’un  photo-mail  est  reçu,  il  est  ouvert automatiquement  et  la  photo  est  affichée pendant 10 secondes à l’écran puis acceptée automatiquement et sotckée dans la “INBOX”.  Ce mode est particulièrement adapté pour les personnes souhaitant simplicité et absence d’interaction avec l’appareil.  - Automatique  Ce mode est le même mode que le précédent simplement les photo-mails sont acceptés sans affichage pendant 10 secondes de la photo à l’écran.  Ce mode est particulièrement adapté pour les personnes souhaitant simplicité et absence d’interaction avec l’appareil.  Remarque: une  fois acceptées, les photos arrivant par  photo-mails sont stockées dans le menu “Mes albums locaux” puis les sous menus PIXSTAR et INBOX.   6. Partager des photos avec d'autres personnes à partir du cadre  Le cadre vous permet de partager des photos avec les membres de votre famille et vos amis de manière très simple. Vous pouvez par exemple envoyer une photo par e-mail à une autre personne ou directement sur un autre cadre Pix-Star®.    Pour  cela,  appuyer  sur  la  touche   de  la  télécommande  lorsque  la  photo  que  vous  souhaitez partager s'affiche à l'écran. Ensuite, un menu apparaît vous permettant de choisir à qui envoyer cette photo. Dans cette fenêtre, vous pouvez choisir parmis les options suivantes :  - Liste de contacts : elle rassemble les destinataires dont vous avez saisis l’adresse e-mail sur le site web, ou à qui vous avez déjà envoyé des photos ou bien qui vous ont déjà envoyé des photos par email et qui ont été automatiquement ajoutés à cette liste par le système.    - Web album : votre photo sera transférée vers l'album web seléctionné.  - "Envoi vers un cadre ou e-mail" : permet d'envoyer une photo en entrant manuellement l’adresse email du destinataire. Cette option est à utiliser dans le cas ou le destintaire n’est pas dans la liste de contacts, sinon utiliser de préférence la liste de contacts, pour plus de simplicité !   7. Visualiser les photos stockées dans un album en ligne sur Internet Le cadre peut afficher des photos stockées sur l'Internet dans un album photo déterminé.   Pour choisir l'album que vous souhaitez afficher sur le cadre, se rendre sur le site web dans l'espace « albums web» et suivre les indications.   Une fois cette configuration effectuée, l'appareil télécharge les photos automatiquement à partir du site web pour les stocker sur sa mémoire locale. Pour les afficher dans un diaporama, aller dans le menu « mes albums web », selectionner l’album web que vous souhaitez afficher, puis appuyer sur la touche  .   Votre Pix-Star vérifie périodiquement le contenu de l'album web et synchronise son contenu afin de rester  constamment  à  jour. Si,  par  exemple,  des  images sont  rajoutées  sur l'album  web  depuis Internet  via  l’itnerface  www.pix-star.com,  le  cadre  les  rajoutera  dans  son  diaporama  quelques minutes plus tard. De la même manière, si des images sont supprimées depuis Internet, elles le seront de même sur le diaporama interne du cadre.
  23   8. Accèder aux photos stockées dans un serveur UPnP/DLNA sur le réseau local  Cet appareil est compatible UPnP/DLNA. Il peut donc accèder, à distance, via le réseau local (grâce à la connexion Wi-Fi) aux photos stockées dans les serveurs UPnP/DLNA connectés à ce réseau.  Pour cela, aller dans le menu « Mes albums locaux » puis le sous-menu « Mes équipements réseau ». Au  bout  de  quelques  secondes  la  liste  des  serveurs  UPnP/DLNA  trouvés  sur  le  réseau  local  va apparaître  (Remarque :  il  est  imperatif  à  ce  stade  d’avoir  configuré  la  connexion  Wi-Fi  de l’appareil).  A  partir  là, vous  pouvez facilement  naviguer  dans  les  répertoires  du  serveur  et  lancer  à tout moment un diaporama des photos que vous souhaitez visualiser.  Lorsque vous jouez un diaporama d’une source UPnP/DLNA, les photos sont récupérées au fur et à mesure (streaming). Il est donc impératif que le serveur UPnP/DLNA reste en permanence allumé et connecté au réseau local.  Remarque: Certains équipements UPnP/DLNA nécessitent une légère configuration pour pouvoir fonctionner  correctement  avec  cet  equipement.  Consulter  notre  blog  via  le  site  web www.pix-star.com pour plus d’infos ou nous contacter par email à l’adresse info@pix-star.com.   9. Fonctionnement du diaporama  Le diaporama dispose de 2 modes d’affichage : le mode « normal » et le mode « collage ».  Le mode collage est, par défaut, activé. A chaque demarrage d’un diaporama, 5 photos s’affichent à la fois sur l’écran dans un assemblage appelé « collage ».  A  tout  moment  pendant  l’affichage  de  ce  collage,  un  appui  sur  n’importe  quelle  touche  de  la télécommande permet de revenir au mode normal où les photos sont affichées une par une en plein écran.  Pour relancer  à  nouveau  le  mode  collage,  une  fois revenu au mode  normal,  il est impératif de quitter le diaporama et de revenir au menu principal. Relancer ensuite un diaporama qui démarrera alors à nouveau en mode collage.  Si vous souhaitez désactiver le mode collage, aller dans le menu CONFIGURATION puis le sous-menu SYSTEME. Vous pouvez aussi le désactiver à partir de la barre de menu du diaporama en appuyant sur  le  boutton  MENU  de  la  télécommande  lorsqu’un  diaporama  en  mode  normal  défile,  choisir ensuite le deuxième choix en partant du bas intitulé “options”.   10. Changer la configuration de l’appareil  L’appareil contient deux menus à partir desquels vous pouvez changer son paramètrage.  Le menu  CONFIGURATION accessible  depuis  le  menu  principal.  A  l’interieur  vous  pouvez  ainsi règler les paramètres suivants :  - La langue de l’interface utilisateur ; - Ajuster l’heure et la date ; - Ajuster les heures d’extinction automatique de l’écran ;
  24 - Changer la configuration de la connexion Wi-Fi ; - Dans le menu SYSTEME vous pouvez configurer: o Le mode de réception des photo-mails: manuel ou automatique o Activer et désactiver le mode collage du diaporama o Ajuster la luminosité de l’écran  Le menu OPTIONS dans la barre de menu sur la gauche du diaporama.  Lorsqu’un diaporama est en cours, appuyer sur le bouton MENU, dans la barre de menu qui s’affiche sur  la  gauche  de  l’écran  descendre  sur  l’avant  dernier  choix  appelé “OPTIONS”  et appuyer  sur PLAY/OK pour l’ouvrir.  Dans ce menu il est alors possible de règler :  - Le type de transitions pour le diaporama ; - Le type de diaporama, normal ou aléatoire ; - La luminosité de l’écran ; - L’intervalle entre deux photos (temps d’affichage) ; - Choisir la photo courante comme fond d’écran du menu principal ; - Activer et désactiver le mode collage.   11. Comment utiliser l’interface web   Comment choisir sa météo ?  A partir de l’interface web, vous avez la possibilité de consulter sur votre cadre l'évolution météo des villes ou des pays de votre choix.  Pour cela, rien de plus simple : rendez vous sur www.pix-star.com dans la rubrique « Infos météo » pour visionner les villes classées par pays.  Vous pouvez également constituer votre propre répertoire en cliquant sur « Ma liste météo ». Vous pourrez ensuite  visualiser votre  choix météo  depuis  votre  cadre en  vous  rendant dans  l’espace « Web album », accessible depuis le menu principal.  Comment gérer ses contacts ?  Ajouter ses contacts depuis l’interface web www.pix-star.com permet de constituer un répertoire visible depuis son cadre pour envoyer directement un email à ses amis sans avoir à réécrire leur adresse. Il vous est également possible de supprimer vos contacts.  En plus d’être un gain de temps, vous pouvez également constituer des groupes d’amis et, en un seul clic, envoyer l’image de votre choix à l’ensemble des membres de cette liste.  Comment filtrer ses e-mails ?  Vous pouvez activer le filtrage des "e-mails entrant" afin de décider des personnes autorisées à envoyer des photos sur votre Pix-Star®. Pour cela, il suffit sur le site web de cliquer dans le sous menu « Filtrage e-mail ». Plusieurs choix sont alors proposés :  - Ne pas appliquer de filtre (c’est le mode par DEFAUT) ;  - REFUSER systématiquement tous les e-mails SAUF ceux de la liste «blanche» de vos invités ;  - ACCEPTER tous les e-mails entrant SAUF ceux de la liste «noire» des personnes non autorisées.
  25  12. Caractéristiques techniques  Format supporté  Image - JPG, JPEG, BMP, PNG, GIF  Type de mémoire  Cartes SD / SDHC / MMC  USB  Clé USB  Capacité de stockage  1,3 Go au total pour le stockage de photos soit jusqu’à 12000 photos.  Consommation  Max. 7W   Les  informations  fournies  dans  ce  document  sont  données  à  titre  indicatif  et  peuvent  à  tout moment faire l'objet de modifications de la part du fabricant.   13. Signification des icônes du menu   PROBLEME ! Pix-Star® n’est pas connecté au réseau Wi-Fi   (Soit la connexion Wi-Fi n’est pas configurée, soit le réseau Wi-Fi n’est pas accessible)  Pix-Star® est connecté au réseau Wi-Fi et le signal est minimum (faible)    Pix-Star® est connecté au réseau Wi-Fi et le signal est maximum (fort)    PROBLEME ! Le cadre n’arrive pas à se connecter à l’Internet (Vérifier la connection Wi-Fi et la connection Internet de votre routeur)    Le cadre est maintenant connecté à l’internet et fonctionne normalement (Il peut recevoir et envoyer des photos email mail et synchroniser le contenu des albums web)    Un nouvel e-mail est arrivé sur le cadre !  Carte SD / SDHC / MMC détectée et prête    Source USB détectée et prête
  26  14. Signification des icônes du diaporama    Envoyer une photo par e-mail  Photo suivante  Lancer le Diaporama (lorsqu’en pause)  Interrompre le diaporama (une fois lancé)  Photo précédente  Tourner la photo  Supprimer la photo courante  Miniature des photos  Options (configuration des paramètres du diaporama)  Retour au Menu Principal
  27 15. Arborescence des menus du cadre Pix-Star®   Mes albums locaux - Mon Cadre Pix-Star® (Inbox)  Afficher  les  photos  envoyées  par  e-mail  par  vos  proches  ou transférés via une carte SD / SDHC / MMC ou une clé USB  Mes albums web - +Météo+ - Arcor - Ezubi - Facebook - FlickR - Kotoo - MobileMe - Padeleon - Phanfare - Photobucket - Photo RSS - Picasa - Pix-Star® - Shutterfly - Signagelive - SmugMug - XiaoNei - WindowsLive     Afficher  les  albums web  ajoutés  depuis  www.pix-star.com.  Ne s’afficheront que ceux préalablement sélectionnés sur le site web.  Gestionnaire de fichiers - Mon Pix-Star® - USB - Carte SD  Gérer les fichiers contenus sur la mémoire interne du cadre  Configuration        - Langue   - Date/heure  - Mode veille  - Infos Système - Wi-Fi     - A propos de  - Remise à zéro    Configurer la langue de votre cadre   Configurer la date et l’heure de votre cadre Régler la mise en veille et l’allumage automatique de votre cadre Configurer les paramètres de votre cadre Choisir le réseau Wi-Fi et configurer la connexion Informations utiles du cadre Effectuer une réinitialisation du cadre    16. Gestionnaire de fichiers :  - Comment copier un fichier vers un autre dossier ? Sélectionner le ou les fichiers souhaité(s) en cliquant sur le bouton central de la télécommande (). Cliquer sur le bouton « Menu » en haut à gauche de la télécommande, sélectionner « copier la sélection  vers…».  Revenir  en  arrière  (  )  puis  sélectionner  le  répertoire  voulu.  Cliquer  sur  le bouton « Menu » de la télécommande, cliquer « sélectionner ».  - Comment créer un dossier dans un répertoire ? Aller dans le répertoire voulu. Cliquer sur le bouton « Menu » de la télécommande, sélectionner « Créer répertoire » à l’aide du bouton central de la télécommande (  )
  28 - Comment supprimer des fichiers ? Sélectionner le ou les fichiers souhaité(s) en cliquant sur le bouton central de la télécommande ( ). Cliquer sur le bouton « Menu » de la télécommande, sélectionner « Suppression de fichiers ».  17. Déclaration de conformité  Nous, Spheris Digital Ltd., déclarons sous notre seule responsabilité que les produits PXT510WR02B sont  en  conformité  avec  les  recommandations  du  Council  Directive  on  Radio  Equipment  and Telecommunications Terminal Equipment.   Ce produit est marqué du label CE    Protection de l’environnement Nous vous conseillons de retourner votre cadre à la fin de sa durée de vie d’utilisation dans les centres  de  récupération  publics  pour  le  recyclage  et  la  réutilisation  des  objets  électriques  et électroniques.    Le symbole suivant sur le produit, le manuel d’instructions ou l’emballage indiquent que le produit est soumis à la directive européenne 2002/96/EU.    Spheris Digital Ltd     Info@pix-star.com      www.pix-star.com
  29     Willkommen Sie haben gerade einen Wireless digitalen Bilderrahmen bekommen und wir bedanken uns herzlich für Ihr Vertrauen von unserem Produkt und unserer Läsung.    Dieser Digitaler Bilderrahmen ist komplett eine neue Generation von dem Produkt mit den Wireless Fähigkeiten und innovativen Eigenschaften was, wir glauben, Sie entzücken werden.    Mit dem Produkt kännen Sie jeder Zeit und ganz einfach Ihre besten Momente innerhalb ein paar Sekunden an Ihren Freunden und Ihrer Familie teilhaben egal wo die sind. Gleichzeitig hat dieses Produkt die traditionellen Eigenschaften von einem digitalen Bilderrahmen der die Möglichkeit hat die  Bilder  und  andere  Mediadateien  von  USB  Memory  Stick  und  kompatiblen  Speicherkarten anzuzeigen.   Wir hoffen dass Sie das Nutzen von unserem Produkt geniessen. Zögern Sie nicht uns Ihr Feedback und Ihre Vorschläge zu geben indem Sie sich bei unserer Webseite www.pix-star.com anmelden.    Warnung : Dies Handbuch für die Nutzung der Pix-Star® Bilder Rahmen ist simplifiert. Für mehr Informationen oder die Limited Warranty des Produkt zu haben, gehen Sie auf unsere web-seite www.pix-star.com  in  der  Blog  oder  Forum  Sektion.  Oder  versenden  Sie  eine  Email  an info@pix-star.com  ANMELDUNG Für  Ihrer  Pix-Star  Online  anmeleden,  gehen  Sie  auf  www.pix-star.com,  und klicken Sie auf "Meinen neuen Pix-Star Bilderrahmen registrieren". Empfangen und senden Sie Bilder von/an Ihrem Freunden und Verwandten aus der ganzen Welt! Enjoy your Pix-Star®
  30               Empfehlungen der Anwendung und der Sicherheitswarnungen  Installieren Sie den digitalen Bilderrahmen nicht dicht zu einer Wasserquelle (min. 1,5 m von einer Wasserquelle) oder in einer feuchten Umgebung (wie z.B. Badezimmer, Wäscherei, Küche etc.).    Dieses Produkt ist konstruiert wurden für eine Arbeit in einem Zimmer oder in einem Haus und kann nicht draussen benutzt werden.   Dieses Produkt muss bei einer Temperatur zwischen 10°C und 35°C benutzt werden.   Benutzen Sie dieses Produkt nur mit dem Hauptleistungsadapter der mit dem Produkt zusammen ist.    Die CE Kennzeichung zertifiziert dass das Produkt in Übereinstimmung mit den Hauptanforderungen der  Rechtlinie  von  dem  Europäischen  Parlament  und  dem  Gemeinderat  1995  /  5  /  EC  für  die Telekommunikationsterminals,  die  Gesundheit  des  Benutzers  und  fÜr  die  elektromagnetische Störung ist.    Das  Terminal  ist  konstruiert  wurden  fürs  private  Hausebenutzen  (CPE  customer  premises equipment) innerhalb  der  europäischen Union. Das ist getestet worden  Gemäß den  technischen Dispositionen für den Radioapparat (EN 300328). Deswegen fällt der Lieferant alle Verantwortung ab im Falle von keiner Übereinstimmung mit den aktuellen Bestimmungen im Land wo installiert wird.  Die Erklärung der Übereinstimmung kann konsultiert werden durch unsere Webseite von www.pix-star.com oder kann erhalten werden indem man eine E-mail an support@pix-star.com schickt.
  31 ! Menüs rollen ab   1. Überblick vom Gerät                                                    WARNUNG Durch unsachgemäße Behandlung kann die Batterie explodieren. Versuchen Sie nicht, sie wieder aufzuladen, auseinanderzubauen und werfen Sie sie nicht ins Feuer. HINWEIS: die Fernbedienung ist mitgeliefert mit der 3V Lithiumbatterie (type CR2025) die schon installiert ist. Versetzen Sie den plastischen Etikett um die Fernbedienung zum Benutzen zu starten. Achtung: diese Batterie kann nicht aufgeladen werden.  Pause/ Spielen der Diashow Ein Sub-Menümodus eingeben Eine Auswahl bestätigen  Im Menüsmodus nach links umsetzen Im Modus vom gleitenden Show zu dem letzten Bild umsetzen  Im Menüsmodus nach rechts umsetzen Im Modus vom gleitenden Show zu dem nächsten Bild umsetzen  Im Menüsmodus absetzen  Im Menüsmodus runtersetzen  Teilhaben: Die Kontackt list aufmachen um die Bilder zu schiken / teilhaben  Eingang: Den Eingang öffnen um die per Email erhaltenen Bilder anzuschauen  LCD ein/ausschalten (standby Modus)  Zurück  Menü Slideshow anschauen Menü Seite anschauen  !!   !   !  !  !            Verpackung enhält : - 1 x IR Fernbedienung - 1 x Bedienungsanleitung - 1 x Pix-Star Fotorahmen - 1 x Netzteil 100/220Volt   Menu défiler droite OK / Auswählen SD Karten Reader ! Menüs rollen links Menu défiler bas    Ausschalten/ Einschalten   Zurück AC adapter Anschluss Hauptmenu USB Anschluss ! Menüs rollen runter ! Menüs rollen rechts
  32 2. Installation  Stecken Sie den AC Adapter am Gerät an. Sein Anschluß ist fixiert an der Seite vom Gerät. Dann stecken Sie den AC Adapter zu einer Netzleitung an.  Um das Gerät einzuschalten setzen Sie den Knopf vom Einschalten um der an der linken Seite vom Gerät fixiert ist. Danach soll das Gerät ein LOGO am Bildschirm anzeigen. Warten Sie ganz kurz, das Gerät braucht etwa 30 Sekunden bevor das zum Benutzen bereit ist.  3. Einführung fürs Hauptinterface  Nachdem  Sie  das  Gerät  einschalten  und  ganz  kurz  warten  sollen  die  Bilder  angezeigt  werden. Benutzen Sie den Knopf hinter dem Gerät und dann können Sie in die Menüs reingehen und die durchsuchen.  Um  das  Hauptmenü  zu  öffnen  drücken  Sie  den  Knopf  Menu.  Fünf  Bildzeichen  die verschiedene Menüs bedeuten werden angezeigt.  Sie können die durchsuchen durch die Knöpfe  ← und  →. Um ins gewünschte Menü reinzugehen drücken Sie den Knopf " ".          Hinweis: die Position Back erlaubt Ihnen zu dem letzten Menü zurückgehen zu lassen.
  33 4. Wi-Fi und Internetinstallation    4.1 Das Gerät zum Wi-Fi Wireless Netzwerk anschließen    Jedes Gerät hat eine dedizierte E-mailadresse die dem Gerät eine mäglichkeit gibt die Bilder direkt vom Internet zu bekommen. Um die Bilder zu bekommen muss das Gerät durch ein Wi-Fi Gateway zum Internet angeschloßen werden   Hier ist wie Sie das machen indem Sie Wi-Fi Netzwerk benutzen:   Drücken  Sie  den  Knopf  Menu  um  das  Hauptmenü  aufzumachen.  Rollen  Sie  zu  der  Position Einstellungen Und drücken Sie nochmal Menu. Dann rollen Sie zur Position Wi-Fi Einstellungen und Drücken Sie Menü.   Das Gerät startet einen AUTOMATISCHEN scanning process für ein gültiges Wireless Netzwerk.           4.2 Das Gerät registieren und das Gert am Web managen   Normalerweise soll Ihr Gerät schon mit einer  E-mailadresse konfiguriert werden  (Sehen  Sie  den Zettel an der Abdeckung vorne oder hinten des Geräts).  Besuchen Sie unsere Webseite um Ihren Bilderrahmen zu managen.  Wenn keine E-mailadresse bei dem Gerät angeboten war sollen Sie die online registieren mit folgenden Anweisungen:    Besuchen Sie die Webseite von Pix-Star und klicken Sie Join Now an. Füllen Sie das Formular auf und Ihr Gerät wird zum Benutzen bereit sein! Sie können Gerät ID im Menü Basic Information vom Menü Einstellungen vom Gerät finden. Wählen Sie ein Passwort und die E-mailadresse die Sie zu Ihrem Gerät übertragen möchten.     Hinweis: Ein DHCP Server muss an Ihrem Netzwerk laufen und  eine  IP  Adresse  fürs  geräte anbieten.  Die  meisten persönlichen Wi-Fi Netzwerker haben ein DHCP Server
  34 5. Die Bilder per E-mails direkt am Gerät erhalten  Um ein Bild ins Gerät reinzutragen schicken Sie einfach eine E-mail mit Ihrem Bild als Anhang direkt zu der E-mailadresse des Geräts. Wenn ein neues Bild am Gerät angekommen ist wird ein kleines Bildzeichen "EINGANG" an der Seite oben links des Bildschirms angezeigt. Dann drücken Sie nur den Knopf um das Bild ins gleitende Show einzutragen.        6. Bilder mit Freunden direkt am Gerät teilhaben  Das Gerät erlaubt Ihnen Ihren Freunden an Ihren Bildern teilhaben zu lassen. Um das zu machen drücken Sie den Knopf  ↑ wenn das Bild das Sie schicken möchten angezeigt ist. Dann kommt ein Menü vor das aus mehreren Positionen besteht:  - Übergang zur Webseite: wenn Sie diese Position auswählen wird das Bild zum Server geschickt. Dann können Sie das in Ihrer persönlichen Zone in der Webseite sehen.  - DPF: diese Position erlaubt Ihnen das Bild zu einem anderen Gerät oder zu einer E-mailadresse zu schicken. Wählen Sie die aus und tragen Sie Gerät ID oder die E-mailadresse ein zu der Sie das Bild hinschicken.  - Andere Positionen: diese Positionen sind die Kontakte (ein anderes Gerät oder E-mail) die im Server  eingetragen  sind.  Sie  können  die  Bilder  schnell  zu  denen  hinschicken  indem  Sie  die auswählen.  7. Landschaftsbilder von Ihrem Online-Album am Gerät    Das Gerät kann eine gleitende Show von den Bildern anzeigen die innerhalb Ihrem in der Webseite geschafften Online-Album gelagert sind.    Um das Gerät angegliedert mit dem Album online zu managen melden Sie Ihre persänliche Zone in der Gerät Webseite an. Wöhlen Sie das Menu „ Album “ aus wo Sie neue Bilder abladen oder manche Bilder vom Album löschen können. Sie kännen auch definieren welches Album am Gerät angezeigt wird. Soblad die Bilder zur Gerät Webseite abgeladen worden sind, sind sie sofort einsehbar in der Weitseite und nach normalerweise weniger als 1 Minute am Gerät.   Bei dem Mode von der gleitenden Show im Webalbum wird das Gerät AUTOMATISCH und periodisch seinen Inhalt mit der Webseite synchronisieren.    Wenn ein Bild zum Online Webalbum hingefügt ist wird das Gerät das Bild später zu seinem lokalen gleitenden Show hinfügen. Wenn ein Bild vom Online-Album versetzt ist wird das Gerät das Bild später von seinem lokalen  leitenden Show versetzen. Am mindesten wird die Aktualisierung des Geräts mit dem Online-Album in jeder Minute gemacht.    Hinweis:  Sie  können  ein  paar Bilder  bei  der gleichen  E-Mail schicken. Aber Sie müssen sicher sein dass die Größe von Ihrer E-mail nicht mehr als 20 Mbytes sein darf.
  35 8. Überblick von anderen Funktionalitäten   Das Gerät besteht aus folgenden nützlichen Funktionalitäten:   - Pause   Das Gerät zeigt manchmal die Bilder als ein automatisches gleitendes show an. Allerdings, wenn Sie ein  einzelnes  statisches  Bild  anzeigen  mächten,  können  Sie  das  gleitendes  Show  unterbrechen indem  Sie  den  Knopf  Pause  vom  Hauptmenü  auswählen.  Wählen  Sie  die  Position  Play  um  das gleitendes Show nochmal laufen zu lassen.   -Verschiedene Optionen   Ein  paar  Optionen  können  von  der  Position Basic  Information  vom  Menü  Einstellungen  geändert werden. Es besteht aus Sprache, Transitionen und Zeit per Gleiten.    - Bewegliche Geräte Da  Gerät  kann  die  Bilder  die  in  einer  SD  karte  oder  in  einem  USB  Masse  Speicher  Dongle abgespeichert sind auch lesen. Stecken Sie eine von denen  ins Gerät an, wählen Sie die rechte Speicherzone im Menü Bilder Management und suchen Sie die Adressenbücher durch um eins zu finden das Ihr Bild enthält. Dann klicken Sie Weiter an um ein gleitendes Show bestehend aus ihren Bildern anzuzeigen.  - Bilder Management Das Gerät erlaubt Ihnen Ihre Bilder managen zu lassen. Gehen Sie ins Menü Dateimanager rein und wählen Sie den Speicher aus wo Ihre Bilder festgestellt sind. Dann können Sie ein paar Aktionen durchführen wie z.B. Löschen, Kopieren ...   9. Technische Eigenschaften Unterstütztes Format  Image - JPG, JPEG, BMP, PNG, GIF  Memory Karte  SD / SDHC /MMC  USB  USB kompatibel mit Masse speicher Peripherie  Speicherkapazität    1GB   Energieverbrauch    Max. 7W  Alle Daten sind nur für die Erstellung zuständig. Änderungen von Daten werden von der Herstellern nicht benachrichtet.
  36 10. Die Bedeutung der Symbole im Menü   Nicht mit dem Drahtlosnetzwerk verbunden (Prüfen Sie die WLAN-Einstellungen, eventuell ist kein Drahtlosnetzwerk verfügbar)  Mit dem Drahtlosnetzwerk verbunden, sehr schwaches Signal  Mit dem Drahtlosnetzwerk verbunden, sehr starkes Signal  Die Pix-Star®-Plattform ist nicht erreichbar (Typische Ursachen: Verbindung zum drahtlosen Netzwerk oder zum Internet sind getrennt)  Verbunden mit der Pix-Star®-Plattform   (Bereit zum Versand von E-Mails und zur Synchronisation von Web Alben)  Ungelesene Photo E-Mails im Pix-Star® Photoframe verfügbar  SD / SDHC / MMC-Karte entdeckt und bereit zur Benutzung  USB-Gerät entdeckt und bereit zur Benutzung  11. Die Bedeutung der Symbole im Diashow    Senden Fotonachricht  Nächstes Foto  Diashow abspielen  Diashow anhalten    Vorheriges Foto  Foto drehen  Foto löschen  Kleines Fotos  Weitere Optionen  Schliessen
  37 12.Rahmenplan   Mein Localen Alben - Mein Pix-Star® (Inbox)  Anschauen die gesendete Fotos die per Email bekommen oder durch eine SD Karte, USB Stick übertragen.    Meine Webalben - +WETTER+ - Arcor - Ezubi - Facebook - FlickR - Kotoo - MobileMe - Padeleon - Phanfare - Photobucket - Photo RSS - Picasa - Pix-Star® - Shutterfly - Signaelive - SmugMug - XiaoNei - WindowsLive Anschauen die Alben von der Web Seit www.pix-star.com angefügt     Dateimanager - Mein Pix-Star® - USB - SD Karte    Wechseln die dateien auf dem Rahmen Speicherung  Einstellungen        - Sprache     - Datum & Zeit   - Zeitzone   - Auto An/Aus   - System   - WLAN     - Info  - Zurücksetzen       Konfigurieren die Sprache der Rahmen Konfigurieren die Datum und die Zeit der Rahmen   Wahlen Ihre Zeitzone Konfigurieren den Ecomodus der Rahmen Konfigurieren die Parametern der Rahmen (Bild) Wahlen eine WLAN Netzwerki Spezifitäten der Rahmen Eine Zurücksetzung der Rahmen machen
  38   13. Erklärung der Übereinstimmung Wir,  Spheris  Digital  Ltd,  erklären  unter  unserer  einzelnen  Verantwortung  dass  das  Produkt PXT508WR02 & PXT510WR02B in Übereinstimmung mit den Einrichtungen von der Rechtlinie des Rates am Radioapparat und Telekommunikationsterminalapparat ist.   Das Produkt ist mit der CE Kennzeichung eingezeichnet.      Umweltschutz Sie  werden  vorgeschlagen,  dieser  Rahmen am  Ende  seines  Lebens  zu  den  Öffentlichen Versammlungspunkten  zurückzugeben  die  für  die  Rückschleusung,  die  Wiederverwendung  und elektronische Geräte gerÜndet sind.   Das  folgende  Symbol  am  Produkt, das  Anweisungshandbuch oder  die Verpackung zeigt  dass  das Produkt der Europäischen Rechtlinie 2002 / 96 / EU untergeordnet ist.     Spheris Digital Ltd    Info@pix-star.com    www.pix-star.com
  39     Benvenuti Complimenti per aver acquistato il nostro prodotto e per aver riposto la vostra fiducia nella nostra azienda. Avete appena acquistato una cornice fotografica digitale senza fili.   Questa Cornice Fotografica  Digitale  é  un  prodotto  di  nuova generazione  con  capacitá operative senza fili e caratteristiche del tutto innovative.   Utilizzando questo prodotto potrete  condividere  i  migliori  momenti  della  vostra  vita  assieme  a amici e familiari. Oltre alla classica funzione di una cornice digitale, questo   prodotto  permette  di  visualizzare  file  provenienti  da  dispositivi  USB  e  schede  di  memoria compatibili.   Per  qualsiasi  informazione  o  suggerimento  potete  contattarci  tramite  il  nostro  sito  Internet www.pix-star.com REGISTRAZIONE Per  registrare  il  Vostro  Pix-Star  on  line,  andate  semplicemente  sul  sito www.pix-star.com e  cliccate  su  "Voglio  scegliere  un  indirizzo  mail  per  il  mio Pix-Star"!  Potrete cosi’  instantaneamente  spedire/ricevere  foto a/da  amici  e famigliari. Enjoy your Pix-Star®
  40     Importanti indicazioni sulla sicurezza e sul prodotto Non installare la cornice fotografica digitale nelle vicinanze di sorgenti d`acqua (distanza minima di 1.5 metri) oppure in ambienti eccessivamente umidi (come per esempio sale da bagno, lavanderie, cucine, ecc.).   Questo  prodotto  é  stato  concepito  per  uso  esclusivamente  interno  e  non  puó  essere  usato all`aperto. Evitare d`installare l`unitá in ambienti polverosi.    Questo prodotto deve essere utilizzato ad una temperatura compresa tra 10 e 35.   Utilizzare il prodotto solamente con l`adattatore elettrico allegato alla confezione.   Il  simbolo  CE  garantisce  che  il  prodotto  é  conforme  ai  requisiti  dell`Unione  Europea  ed  alle regolamentazioni  1999/5/EC  per  I  terminali  telecomunicativi,  salute  utente,  sicurezza  ed interferenza elettromagnetica.   Questo terminale é stato designato per solo uso privato(unitá per uso   personale  CPE)  all`interno  dell`Unione  Europea.  É stato  inoltre  testato  secondo  le  disposizioni tecniche per apparecchiature radio (EN 300328). Il costruttore non si assume alcuna responsabilitá in caso di mancato ottemperamento delle condizioni appena citate nel paese d`installazione.    La dichiarazione di conformitá e la garanzia puó essere consultata sul nostro sito Internet www.pix-star.com oppure essere ricevuta via e-mail contattando l`indirizzo support@pix-star.com
  41 ! Scorrere I menu Su   1. Descrizione generale dell`unitá                                   Note : il telecomando è consegnato con 3 batterie al litio 3V gia inserite. Per iniziare ad uasre il telecomando, rimuovere il guscio protettivo.   ATTENZIONE: questa batteria non può essere ricaricata!      Pausa / riprodurre la slideshow Entrare nel sotto-menu in modalita` di menu Confermare la selezione   Spostare il selettore verso sinistra nella modalita` di menu Spostare l`immagine precedente in modalita` diaporama   Spostare il selettore verso destra nella modalita` di menu Spostare l`immagine seguente in modalita` diaporama   Spostare il selettore verso l`alto in modalita` di menu  Spostare il selettore verso il basso in modalita` di menu  Convidisione: aprire la lista di contatti per inviare / condevidere le immagini   Sviluppo: Inbox: Aprire l`inbox per vizualizzare le immagini ricevute via email   Accendere/Spegnere lo schermo LCD (Modalita` di attesa)  Indietro al menu precedente  Visualizzare menu principale  !!   !  !  !  !           La scatola contiene: - 1 x Telecomando IR - 1 x Manuale d'istruzioni - 1 x Cornice foto Pix-Star - 1 x Adattatore di corrente 100/220V   Menu défiler droite OK / Selezionare una voce Lettore scheda SD ! Scorrere I menu Sinistra Menu défiler bas    Accensione / spegnimento   Indietro Porta per adattatore AC Menu principale Porta USB ! Scorrere I menu Giú ! Scorrere I menu Destra
  42 2. Installazione  L`installazione dell`unitá é estremamente facile.  Collegare l`adattatore AC all`unitá. La relativa presa é situata sul lato destro del prodotto. Quindi collegare l`adattatore alla presa elettrica.  Per accendere il prodotto, premere Il pulsante locato sulla parte superiore dell`unitá. Sullo schermo appare un LOGO. Attendere qualche istante, il prodotto necessita di circa 30 secondi prima di poter essere utilizzato.  3. Introduzione all`interfaccia principale  Dopo aver acceso il prodotto, le vostre immagini verranno visualizzate sullo schermo. Se l`unitá viene utilizzata per la  prima volta, nessuna immagine  sará  visualizzata in quanto  la  memoria é vuota.  Utilizzare I pulsanti nella parte posteriore del prodotto, entrare e scorrere il menu. Per aprire il menu  principale,  premere  il  pulsante  Enter.  Sullo  schermo  verranno  rappresentate  cinque differenti  icone.  Scorrerle  utilizzando  i  pulsanti  ← e →;  per  entrare  nel  menu  desiderato, premere il pulsante Enter.        Nota: la voce Back vi permette di ritornare al menu precedente.
  43  4. Wi-Fi e setup Internet  4.1 Connettere l`unitá alla rete Wi-Fi senza fili   Ogni unitá possiede un indirizzo email speciale da cui é possibile ricevere fotografie e scambiarle direttamente tramite Internet. Per ricevere fotografie, é necessario connettere la cornice digitale alla rete tramite il la porta Wi-Fi :     Premere  il  pulsante  Enter  per  aprire  il  menu  principale.  Selezionare  Setting  e  premere  Enter. Quindi  selezionare  Wi-Fi  Setting  e  premere  Enter.  L`unitá  inizia  un  processo  di  scansione AUTOMATICO per individuare le reti disponibili.       4.2 Registrare l`unitá e gestire il prodotto tramite la rete   In genere, il vostro prodotto è giá stato configurato con un indirizzo e-mail (vedere etichetta sulla parte frontale oppure posteriore). Per gestire la cornice d`immagine, visitare il nostro sito internet.  Se  non  viene  fornito  alcun  indirizzo  e-mail,  é  necessario  registrare  l`unitá  online  seguendo  la procedura ivi indicata:    Entrare nella homepage di Pix-Star e cliccare su Join Now. Compilare i campi richiesti; la vostra unitá potrá immediatamente essere utilizzata! L`ID dell`unitá potrá essere identificato nel menu d`informazioni dell`unitá. Selezionare una password e l`indirizzo e-mail desiderato.    5. Ricevere immagini direttamente tramite E-MAIL sull`unitá   Per  inserire  e  visualizzare  nel  Vostro  apparecchio  immagini  provenienti  dal  Web,  inviare semplicemente una e-mail con l'immagine allegata all`indirizzo di posta.   Quando viene ricevuta  una  nuova immagine sull`unitá, nella  parte  alta  a  destra dello schermo Nota: é necessaria la presenza di un server DHCP e di un indirizzo IP per utilizzare la rete. La maggior parte delle reto Wi-Fi utilizza server DHCP.
  44 appare l`icona INBOX. Premere il pulsante per inserire l`immagine nella modalitá di diaporama.      6. CONDIVIDERE le immagini con altre persone tramite l`unitá   L`unitá Vi permette di condividere immagini con  I  Vostri amici. Premere il pulsante per selezionare l`immagine che si desidera inviare. Sullo schermo appare un menu di dialogo:   -WEB ALBUM: se viene selezionata questa voce, l`immagine verrá inviata al server. Potrete vedere la Vostra area personale sul sito Internet.   -CONTACT LIST: questa voce Vi permette di inviare immagini ad un`altra unita oppure ad un`altro indirizzo email. Selezionare la voce e digitare l`ID dell`unitá oppure l`indirizzo email a cui si desidera inviare la fotografia.   -Other items: Tali voci sono state registrate dal server (oppure da un’ altra unitá/email). Potete  condividerle  con  i  vostri  amici.  Se  si  desidera  aggiungere  altri  contatti  o  funzioni  è necessario registrarsi sul sito.   7.Visualizzare immagini dall`ALBUM ONLINE sull`unitá   L`unitá é in grado di visualizzare immagini in formato diaporama precedentemente memorizzate in un album Internet.    Per gestire l`unitá associata all`album online, entrare nell`area personale dell`unitá.    Selezionare il menu “Album” da dove possono essere aggiornate le immagini oppure cancellarne altre. Inoltre è possibile definire l`album di visualizzazione dell`unitá.   Una  volta  che  le  immagini  sono  state  aggiornate  sul  sito  internet  dell`unitá,  saranno immediatamente visibili sulla rete ed in meno di 1 minuto sull`unitá stessa.   In  modalitá  di  album  diaporama,  l`unitá  automaticamente  e  periodicamente  sincronizza  il  suo contenuto con il sito Internet.   Quando  un`immagine  viene  aggiunta  all`album  internet,  l`unitá  la  memorizzerá  a  sua  volta in modalitá  diaporama.  Quando  un`immagine  viene  RIMOSSA  dall`album  internet,  l`unitá  la rimuoverá anche dalla sua memoria. L`aggiornamento dell`unitá viene effettuato ogni minuto.    8. Altre funzioni   L`unitá include le seguenti funzioni:   - Pause   l`unitá  visualizza  le  immagini  in  modalitá  diaporama.  Se  si  desidera  visualizzare  un`immagine statica singola, é possibile interrompere la modalitá di diaporama selezionando il pulsante di Pause sul menu principale. Per riprendere la funzione di diaporama, selezionare la voce Play.   -Miscellaneous options   Diverse opzioni possono essere modificate partendo dalla voce Basic Info nel menu d`impostazione. - Removable devices   L`unitá é in grado di leggere le immagini memorizzate in schede SD oppure USB.   Collegare l`unitá esterna al prodotto, selezionare l`area di memorizzazione in Picture Management e  quindi  scorrere  le  directory  per  trovare  l`immagine  interessata;  cliccare  su  Continue  per visualizzare la diaporama.   Nota:  é  possibile  inviare  più  immagini  nella  stessa  e-mail, assicurandosi che la dimensione dell'allegato non superi I 20 Mbyte.
  45  - Picture management L'`unitá vi permette di gestire le immagini memorizzate. Entrare in Picture Management  e  selezionare  la  memoria  dove le  immagini  sono  state  salvate.  É  quindi  possibile implementare diverse funzioni come Delete, Copy, ecc…    9. Caratteristiche tecniche   Formato supportato    Image – JPG, JPEG, BMP, PNG, GIF   Scheda di memoria  SD /SDHC / MMC USB  Porta USB 1.1 compatibile conunitá esterna periferica 1.1   Capacitá di memorizzazione  1 GB  Consumo elettrico    Max. 7W  Tutti I dati sono forniti per puro scopo di referenza. Il costruttore si riserva il diritto di modificare le specifiche tecniche senza previa notifica.
  46   10. Spiegazione delle icone del menu   Non è collegato alla rete Wi-Fi   (controllare la configurazione  della  connessione Wi-Fi  o se  la  rete Wi-Fi è disponibile)    Collegato alla rete Wi-Fi ma con connessione DEBOLE    Collegato alla rete Wi-Fi e con connessione FORTE    Non si puó accedere alla piattaforma Pix-Star®   (Normalmente succede quando la connessione a Internet o Wi-Fi non è attiva)    Collegato alla piattaforma Pix-Star®   (Pronto per ricevere o mandare messaggi e sincronizzare album web)    Avviso ricevimento foto per email nel portaritratti Pix-Star®    Scheda SD/SDHC/MMC localizzata e pronta per essere utilizzata    Dispositivo USB localizzato e pronto per essere utilizzato    11. Significato delle icone   Invia Foto email  Immagine successiva  Ascolta slideshow  Pausa slideshow  Immagine precedente  Ruota foto  Elimina foto  Photo anteprima  Altre opzioni  Menu principale
  47 12. Frame Map  Mio local albums - Mio Pix-Star® frame (Inbox)  Mio web albums - +WEATHER+ - Arcor - Ezubi - Facebook - FlickR - Kotoo - MobileMe - Padeleon - Phanfare - Photobucket - Photo RSS - Picasa - Pix-Star® - Shutterfly - Signaelive - SmugMug - XiaoNei - WindowsLive  Files manager - My Pix-Star® - USB - Carte SD   Settings        - Language     - Date & Time - Time zone - Auto On/Off - System - Wi-Fi     - About - Reset
  48  13. Dichiarazione di conformitá  Noi, Spheris Digital Ltd., dichiara che la sola responsabilitá consiste nel fatto che il prodotto é in conforme  alle  regolamentazioni  del  Consiglio  Direttivo  in  materia  di  Equipaggiamenti  Radio  e Telecomunicazioni.   Il prodotto é indicato con il marchio    Protezione ambientale Al  termine  della sua  durata  operativa,  suggeriamo  all`utente  di  portare  il  cornice  al  centro  di raccolta specalizzato più vicino alla Vostra area.   Il seguente simbolo presente sul prodotto, sul manuale d`istruzioni oppure sulla confezione indica che il prodotto é soggetto alla Direttive Europee 2002/96/EU.      Spheris Digital Ltd.    Info@pix-star.com    www.pix-star.com
  49      Bem-Vindo Você acaba de adquirir um portaóretratos digital sem fio e gostaríamos de agradecer-lhe por sua confiança em nosso produto e solução.   Este  Porta-Retratos  Digital É  uma  geração  totalmente  nova  com  capacidade  de  rede  sem  fio  e inovadoras características que acreditamos deleitaloão.   Utilizando o  produto  você  estará  apto  a  compartilhar os  seus  melhores momentos com  os  seus amigos  e  sua  família  em  apenas  alguns  segundos  em  qualquer  lugar  que  estejam  a  qualquer momento. Este produto inclui as tradicionais características de um Porta-Retratos Digital, que é capaz de exibir retratos e outros tipos de ficheiros a partir de um cartão de memória USB e cartões de memória compatíveis.    Esperamos que aprecie o nosso produto. Não hesita em dar-nos seu gabarito e sugestões entrando em nosso sitio Web www.pix-star.com. Você também pode baixar a garantia limitada do produto on-line.     REGISTRO   Para registrar seu pix-star online agora, simplesmente vá para www.pix-star.com e clique em: “Eu gostaria de escolher um endereço de e-mail para o meu Pix-Star®”! Você sera capaz de receber/enviar fotos instantaneamente de/para seus amigos e familiars! Desfrute de seu Pix-Star®
  50         Recomendaçãoes do uso e avisos da segurança Não instale seu Porta-Retratos Digital perto de uma fonte de água (mínimo 1.50 m de uma fonte de água) ou em um ambiente úmido (tal como o quarto de banho, a lavanderia, a cozinha, etc.).    Este produto foi projetado para trabalhar dentro de um quarto ou de uma casa e não pode ser usado fora. Evite instalar o produto em um ambiente empoeirado.    Este produto deve ser usado em uma escala de temperatura entre 10 ºC e 35 ºC. Use este produto somente com o adaptador de força principal fornecido junto com o produto.   A  marca  CE  demonstra  que  o  produto  está  em  conformidade  com  as  exigências  principais  do Parlamento  Europeu  e  da  diretriz  orientadora  de  conselho  1999/5/EC  para  terminais  de telecomunições, saúde e segurança do usuário e para o distúrbio eletromagnético.    Este terminal foi projetado para o uso confidencial, interno (equipamento de   premissa do cliente do CPE) dentro da União Européia. Ele foi testado de acordo com as disposições técnicas  para  equipamento  de  rádio  (EN  300328).  Assim,  o  fabricante  declina  toda  a responsabilidade em caso da não conformidade com os regulamentos atuais no país da instalação.   A declaração de conformidade pode ser consultada em nosso sitio em www.pix-star.com ou pode ser obtida emitindo um e-mail a support@pix-star.com
  51 ! Rolas os menus Acima   1. Vista geral do DISPOSITIVO                         Nota: o controlo a distância acompanha uma bateria de lítio 3V já instalada. Remova a aba plástica para começar usar o controlo a distância. ATENÇÃO: esta bateria não pode ser recarregada!  Parar / iniciar a apresentação de slides Paraentrar em um submenu quando na modalidade de menu / Confirma a selecção  Move à esquerda na modolidade de menu. Move para o retrato precedente na modalidade de apresentação de slides  Move à direita na modolidade de menu. Move para o retrato precedente na modalidade de apresentação de slides  Move acima na modolidade de menu.    Mova abaixo na modolidade de menu.     Share : Abra a lista de contactos para eviar / compartilhar retratos  Inbox : Abre a caixa de recepção para ver os retratos recebidos por correio electrónico  Liga/deliga o ecrã (modalidade de espera)  Voltar  Menu  !!   !   !  !  !           O Pacote contém: - 1x Controle Remoto - 1x Manual do Usuário - 1x Porta Retratos Pix-Star - 1x Adaptador de Corrente 110/220V   Menu défiler droite OK / Selection Leitora de cartões SD  ! Rola os menus esquerda Menu défiler bas    Lig / Desl   Voltar Porta de adaptator AC Menu Porta USB ! Rola os menus Abaixo ! Rola os menus Direita
  52  2. Instalação  Primeiramente, conecte o adaptador CA no DISPOSITIVO. A ficha do adaptador está situada no lado do dispositivo. Então, conecte o adaptador CA a uma linha eléctrica.  Para ligar o DISPOSITIVO, mova a tecla de interruptor situada ao lado do dispositivo, à direita. Após isto,  o  DISPOSITIVO  deve  mostrar  um  LOGOTIPO  em  seu  ecrã.  Espere  um  pouco,  o  DISPOSITIVO necessita de aproximadamente 30 segundos antes de estar pronto para ser utilizado.  3. Introdução à relação principal  Após você ligar o DISPOSITIVO e esperar um pouco, retratos devem ser exibidos.  Usando as teclas atrás do DISPOSITIVO, você pode incorporar os menus e consultá-los. Para abrir o menu  principal,  pressione  a  tecla  menu.  Cinco  ícones  que  representam  menus  diferentes  são indicados. Para entrar no menu desejado, pressione a tecla " ".              Nota: O item “Voltar” permite que você volte ao menu precedente.
  53   4. Instalação do Wi-Fi e Internet   4.1 Conecte o DISPOSITIVO à rede sem fio Wi-Fi   Cada DISPOSITIVO tem um endereço electrónico dedicado que torna possível que o DISPOSITIVO receba  retratos  directamente  da  Internet.  Para  poder  receber  retratos  o  DISPOSITIVO  deve  ser conectado a Internet através de uma porta de ligação Wi-Fi .    Aqui estão as instruções de como fazer isto utilizando sua rede Wi-Fi :   Pressione a tecla menu para abrir o menu principal. Role para o item ajustes e pressione menu outra vez. Então, role aos ajustes de Wi-Fi e pressione menu.   O DISPOSITIVO inicia um processo da exploração AUTOMÁTICA de redes sem fio disponíveis.              4.2 Registre e controle o DISPOSITIVO na web  Normalmente  seu  dispositivo  deve  já  estar  configurado  com  um  endereço  electronico  (veja  a etiqueta na tampa dianteira ou na tampa traseira do dispositivo).  Para controlar seu porta-retratos vá a nosso sítio Web.  Se nenhum endereço electrónico foi fornecido com o DISPOSITIVO, você deve registálo em linha seguindo as instruções abaixo:  Vá ao sítio Web da Pix-Star® e clique em Participar Agora. Encha o formulário e seu DISPOSITIVO estará pronto para ser utilizado! Você pode encontrar a identificação do DISPOSITIVO no menu de informação básica do menu ajustes de seu DISPOSITIVO. Escolha uma senha e o endereço electrónico que você atribuir a seu DISPOSITIVO.  Nota: Um servidor de DHCP deve estar em execução em sua rede e fornecer um endereço IP ao DISPOSITIVO. A maioria das redes Wi-Fi pessoais mantém um servidor DHCP em execução.
  54  5. RECEBA retratos por CORREIO ELECTRÓNICO directamente no dispositivo  Para  pôr um  retrato  em  seu  DISPOSITIVO,  emita  simplesmente  um  correio electrónico com  seu retrato anexado ao endereço electrónico de seu DISPOSITIVO directamente. Quando um retrato novo é recebido no DISPOSITIVO, um ícone pequeno de “INBOX” estará indicado no lado direito superior da tela. Então, apenas pressione a tecla para introduzir o retrato no show de slides.       6. COMPARTILHAR retratos com amigos diretamente no dispositivo  O DISPOSITIVO permite que você compartilhe seus retratos com seus amigos. Para tanto, pressione a tecla  enquanto o retrato que você deseja emitir for exibido. Então, um menu composto de diversos itens aparece:  - TRANSFERÊNCIA AO SÍTIO WEB: Se você selecciona este item, o retrato   será emitido ao servidor. Você poderá vêólo em sua área pessoal no Web sítio.   -DPF: Este item permite que você emita o retrato a um outro DISPOSITIVO ou a um endereço electrónico. Seleccione-o e insira a identificação do DISPOSITIVO ou o endereço electrónico que você queira.   -Outros itens: Estes itens são companheiros (outro DISPOSITIVO ou endereço electrónico) que são gravados no servidor. Você pode rapidamente enviar retratos para eles seleccionando-os. Se desejar adicionar mais companheiros, entre no sítio web.    7. Ver retratos do seu ÁLBUM ONLINE no dispositivo   O dispositivo É capaz de exibir uma apresentação de slides dos retratos guardados dentro do seu álbum online, criado no sítio web.    Para gerência do álbum online associado ao DISPOSITIVO, entre na sua área pessoal no sítio web do DISPOSITIVO. Escolha o menu “Álbum” onde você pode transferir novos retratos ou excluir alguns dos retratos do álbum. Você pode também definir qual álbum para ser exibido no DISPOSITIVO.   Uma vez que os retratos tenham sido transferidos para o sítio web do DISPOSITIVO, eles são visíveis imediatamente no sítio web e depois, freqüentemente, de 1 minuto no dispositivo.    Quando no modo de apresentação de slides do álbum web o DISPOSITIVO irá AUTOMATICAMENTE e periodicamente sincronizar seu conteœdo com o sítio web. Quando um retrato  é adicionado ao álbum online, o DISPOSITIVO depois o adiciona em sua apresentação de slides local. Quando um retrato É REMOVIDO do álbum online, o DISPOSITIVO depois o removerá de sua apresentação de slides local. A actualização do DISPOSITIVO com o álbum online é completada em alguns minutos.   8. Vista de outras funcionalidades   O DISPOSITIVO inclui as seguintes úteis funcionalidades:   - Pausa    Nota: Você pode emitir diversos retratos no mesmo correio, mas você deve estar certo de que o tamanho de seu correio electrónico não excede 20 Mbytes.
  55 O DISPOSITIVO usualmente exibe os retratos como uma apresentação de slides   automática. Contudo, se você deseja exibir apenas um retrato estático, você pode interromper a apresentação de slides seleccionando o botão Pausa do menu principal. Para exibir a apresentação de slides novamente, seleccione o item Reproduzir.    - Opções variadas   Muitas opções podem ser modificadas a partir do item Inf. Básicas do menu Ajustes. Este inclui Idioma, Transição e Tempo por slide.   - Dispositivos Removíveis   O  DISPOSITIVO  é  também  capaz  de  ler  retratos  guardados  em  um  cartão  SD  ou  em  um  Disco Amovível. Conecte  um  deles  no DISPOSITIVO, seleccione a  área de armazenamento correcta no menu Gerência de Retratos e consulte os directórios para encontrar aquele que inclui seu retrato, então pressione Continue para exibir uma apresentação de slides composta pelos seus retratos.   - Gerência de retratos   O  DISPOSITIVO permite que  você  gerencie seus retratos. Entre  no  menu de  Gerenciamentos de retratos e seleccione a memória onde seus retratos estão localizados. Após, você pode executar uma série de ações, como Excluir, Copiar...    9. Características técnicas    Formatos suportados     Image – JPG, JPEG, BMP, PNG, GIF   Cartão de Memória   SD / SDHC / MMC  USB  Porta USB 1.1, compatível com periféricos de memória de massa 1.1   Capacidade de Armazenamento  1GB   Consumo de Energia   Max. 7W  Todos os dados são providos como referência apenas. O fabricante se reserva o direito de modificar as especificações sem qualquer aviso prévio.
  56  10. Significado dos ícones do menu   O Pix-Star® não está conectado à rede Wi-Fi   (Sua  conexão  Wi-Fi não  está  configurada  ou  sua  rede  Wi-Fi  não  está acessível)    O Pix-Star® está conectado à rede Wi-Fi e o sinal é MÍNIMO (fraco)    O Pix-Star® está conectado à rede Wi-Fi e o sinal É MÍNIMO (forte)    O Porta-Retratos não consegue se conectar à plataforma Pix-Star® (Verifique a conexão Wi-Fi e a conexão Internet de seu rotiador)  O Porta-Retratos está conectado à plataforma Pix-Star® (Pode receber e enviar Fotos por E-Mail e sincronizar os álbuns Web)    Seu Porta-Retratos recebeu novas fotos por E-Mail    Cartão SD / SDHC / MMC detectado e pronto    Dispositivo USB detectado e pronto    11. Significado dos ícones   Enviar foto-email  Próxima Foto  Inicia Show de Slides  Parar Show de Slides  Foto Anterior  Girar Foto  Excluir Foto  Miniatura da Foto  Mais opções  Fechar
  57  12. Frame Map  Meus albums locais - Mio Pix-Star® frame (Inbox)  Meus albums web - +WEATHER+ - Arcor - Ezubi - Facebook - FlickR - Kotoo - MobileMe - Padeleon - Phanfare - Photobucket - Photo RSS - Picasa - Pikeo - Pix-Star® - Shutterfly - Signaelive - SmugMug - XiaoNei - WindowsLive  Gerenciador de arquivos - Mio Pix-Star® - USB - Carte SD   Configurações       - Language     - Date & Time - Time zone - Auto On/Off - System - Wi-Fi     - About - Reset
  58  13. Declaração de Conformidade Nós, Spheris Digital Ltd., declaramos sob nossa única responsabilidade que o produto está em conformidade com as provisões da Diretriz do Conselho para Equipamentos de Rádio e Equipamentos de Terminais de Telecomunicações.   O produto é identificado com a marca CE     Protecção ambiental  É sugerido que você retorne o produto no fim da sua vida útil aos pontos de colecta públicos para reciclagem, reutilização de dispositivos eléctricos e electrínicos.   O  seguinte  símbolo  no  produto,  no  manual  de  instruções  ou  no  pacote  indica  que  meus porta-retratos está sujeito à Directriz Europeia 2002/96/EU.    Spheris Digital Ltd.   Info@pix-star.com      www.pix-star.com
  59        Bienvenido Usted  acaba  de  adquirir  uno  marco  digital  inalámbrico  y  gustaríamos  de  agradecerle  por  su confianza en nuestro producto y solución.    Este  Marco  Digital  es  una  generación  totalmente  nueva  con  capacidad  de  red  inalámbrica  e innovadoras características que creemos irán deleitarlo.    Utilizando el producto usted estará apto a compartir los suyo mejores momentos con sus amigos y su  familia  en  sólo  algunos  segundos  en  cualquier  lugar  que  estén  a  cualquier  momento.  Este producto incluye las tradicionales características de  uno Marco Digital, que es capaz de exhibir retratos y otros tipos de archivos a partir de una tarjeta de memoria USB y tarjetas de memoria compatibles.    Esperamos que aprecie nuestro producto. No hesite en darnos su solución y sugerencias entrando en nuestro sitio Web www.pix-star.com. También se puede descargar la garantía limitada del producto en línea.   REGISTRO   Para registrar su pix-star en línea ahora, simplemente vaya a www.pix-star.com y haga clic en "Me gustaría elegir un e-mail a mi Pix-Star® "! Usted será capaz de recibir/enviar imágenes de forma instantánea desde/a tus amigos y familiares! Disfrute de su Pix-Star®
  60            Recomendaciones del uso y avisos de la seguridad   No instale suyo Marco Digital cerca de una fuente de agua (mínimo 1.50 m de una fuente de agua) o en un ambiente húmedo (tal como el cuarto de ba–o, la tintorería, la cocina, etc.).    Este producto fue proyectado trabajar dentro de un cuarto o de una casa y no puede ser usado fuera. Evite instalar el producto en un ambiente empolvado.   Este producto debe ser usado en una escala de temperatura entre 10°C y 35°C.   Use este producto solamente con el adaptador de fuerza principal proveído junto con el producto.   La marca CE demuestra que el producto está en conformidad con las exigencias   principales  del  Parlamento  Europeo  y  de  la  directriz  orientadora  de  consejo  1999/5/EC  para terminales  de  telecomunicaciones,  salud  y  seguridad  del  usuario  y  para  el  disturbio electromagnético.   Este  terminal  fue  proyectado  para  el  uso  confidencial,  interno  (equipamiento  de  premisa  del cliente  del  CPE)  dentro  de  la  Unión  Europea.  Él  fue  probado  de  acuerdo  con  las  disposiciones técnicas para equipamiento de radio (EN 300328). Así, el fabricante declina toda la responsabilidad en caso de no conformidad con las normativas actuales en el pa’s de la instalación.       La declaración de conformidad puede ser consultada en nuestro sitio en www.pix-star.com o puede ser obtenida emitiendo un mensaje electrónico la support@pix-star.com .
  61 ! Rueda los menús arriba  1. Descripción del DISPOSITIVO                     Nota : lo teledirigido acompaña una batiría de litio 3V ya instalada. Remueva la aba plástica para comenzar usar lo teledirigido.    ATENCIÓN: ¡esta batiría no puede ser recargada!  Parar / Iniciar la presentación de diapositivas Para entrar en un submenú cuando en la modalidad de menú Confirma la selección  Mueve a la izquierda en la modalidad de menú. Mueve hacia el retrato precedente en la modalidad de presentación de diapositivas  Mueve a la derecha en la modalidad de menú. Mueve hacia el retrato precedente en la modalidad de presentación de diapositivas  Mueve arriba en la modalidad de menú.    Mueve abajo en la modalidad de menú.  Share: Abra la lista de contactos para enviar / compatir retratos  Inbox:Abre la caja de recepción para ver los retratos recididos por correo electrónico  Con. / Des. la pantalla (modalidad de espera)  Espalda  Exponer menú  El paquete contiene: - 1 x Mando a distancia IR - 1 x Guía de usuario - 1 x Marco de fotos Pix-Star - 1 x Adaptador de corriente 100/220V   !!    !   !   !  !              Menu défiler droite OK / Seleccione Lectora de tajectas SD  ! Rueda los menús izquierda Menu défiler bas    Con. / Des.  Espalda Puerto de adaptador de AC Menú Puerto USB ! Rueda los menús abajo ! Rueda los menús derecha
  62  2. Instalación  Primeramente,  conecte  el  adaptador  de  CA  en  el  DISPOSITIVO.  El  enchufe  del  adaptador  está situado en el lado del dispositivo. Entonces, conecte el adaptador de CA la una línea eléctrica.  Para conectar el DISPOSITIVO, mueva la tecla de interruptor situada al lado del dispositivo, a la derecha. Después de esto, el DISPOSITIVO debe mostrar un LOGOTIPO en su pantalla. Espere un poco, el DISPOSITIVO necesita de aproximadamente 30 segundos antes de estar pronto  para ser utilizado.   3. Introducción al interfaz principal  Después de usted conectar el DISPOSITIVO y esperar un poco, retratos deben ser exhibidos.  Usando las teclas atrás del DISPOSITIVO, usted puede entrar en los menús y consultarlos. Para abrir el menú  principal, presione la  tecla  menu.  Cinco iconos que  representan  menús  diferentes son indicados. Usted puede consultarlos utilizando las teclas  y . Para entrar en el menú deseado, presione la tecla " ".        Nota: El ítem “Back” permite que usted vuelva al menú precedente.
  63   4. Instalación del Wi-Fi e Internet    4.1 Conecte el DISPOSITIVO a la red inalámbrica Wi-Fi    Cada DISPOSITIVO tiene una dirección electrónica dedicada que hace posible que el DISPOSITIVO reciba retratos directamente de la Internet. Para poder recibir retratos el DISPOSITIVO debe ser conectado internet a través de una pasarela Wi-Fi .    Aquí están las instrucciones de cómo hacer esto utilizando su red Wi-Fi :    Presione la tecla menu para abrir el menœ principal. Ruede para el ítem ajustes y presione menu otra vez. Entonces, ruede a los ajustes de Wi-Fi y presione menu.  El DISPOSITIVO comienza un proceso de exploración AUTOMÁTICA de redes inalámbricas disponibles.         Nota: Un servidor de DHCP debe estar en ejecución en su red y suministrar una dirección IP al DISPOSITIVO. La mayoría de las redes Wi-Fi personales mantiene un servidor DHCP en.
  64  4.2 Registre y control el DISPOSITIVO en la web  Normalmente  su  dispositivo  debe  ya  estar  configurado  con  una  dirección  electrónica  (vea  la etiqueta en la tapa delantera o en la tapa trasera del dispositivo).  Para controlar su moldura digital, vaya a nuestro sitio Web. Si ninguna dirección electrónica fue proporcionada  con  el  DISPOSITIVO,  usted  debe  registrarlo  en  línea  siguiendo  las  instrucciones abajo:  Vaya a lo sitio Web de la Pix-Star y clique en Participar Ahora. ¡Llene el formulario y su DISPOSITIVO estará pronto para ser utilizado! Usted puede encontrar la identificación del DISPOSITIVO  en  el menú  de  información  básica  del  menú  ajustes  de  su  DISPOSITIVO.  Escoja  una  contraseña  y  la dirección electrónica que usted desea atribuir a su DISPOSITIVO.   5. RECIBA retratos por CORREO ELECTRÓNICO directamente en el dispositivo  Para poner un retrato en su DISPOSITIVO, emita simplemente un correo electrónico con su retrato agregado a la dirección electrónica de su DISPOSITIVO directamente.  Cuando  un  retrato  nuevo  es  recibido  en  el  DISPOSITIVO,  un  icono  pequeño  de  “INBOX”  estará indicado  en  el  lado  derecho  superior  de  la  pantalla.  Entonces,  sólo  presione  la  tecla    para introducir el retrato en el demonstración de diapositivas.        6. COMPARTIR retratos con amigos directamente en el dispositivo  El DISPOSITIVO permite que usted comparta sus retratos con sus amigos.  Para  tanto,  presione  la  tecla    mientras  el  retrato  que  usted  desea  emitir  que  sea  exhibido. Entonces, un menú compuesto de diversos ítems aparece:  - TRANSFERENCIA A LO SITIO WEB:    Si usted selecciona este ítem, el retrato será emitido al servidor. Usted podrá verlo en su área personal en lo sitio Web.  -DPF : Este ítem permite que usted emita el retrato a un otro DISPOSITIVO    o a una dirección electrónica. Selecci—nelo e inserte la identificación del DISPOSITIVO    o la dirección electrónica que usted quiera.    -Otros  ítems:  Estos  ítems  son  compañeros  (otro  DISPOSITIVO  o  dirección  electrónica)  que  son grabados en el servidor. Usted puede rápidamente enviar retratos para ellos seleccionándolos. Si desear añadir más compañeros, entre en el web sitio.     7. Ver retratos de su ÁLBUM ONLINE en el dispositivo   El dispositivo es capaz de exhibir una presentación de diapositivas de los retratos guardados dentro de su álbum online, creado en el sitio web.    Nota: Usted puede emitir diversos retratos en el mismo correo, pero usted debe estar correcto de que el tamaño de su correo electrónico no excede 20 Mbytes.
  65 Para gerencia del álbum online asociado al DISPOSITIVO, entre en su área personal en el sitio web del DISPOSITIVO. Escoja el menú “Album” donde usted puede transferir nuevos retratos o excluir algunos de los retratos del álbum. Usted puede también definir cual álbum para ser exhibido en el DISPOSITIVO.    Una  vez  que  los  retratos  hayan  sido  transferidos  hacia  el  sitio  web  del  DISPOSITIVO,  ellos  son visibles inmediatamente en el sitio web y después, frecuentemente, de 1 minuto en el dispositivo.    Cuando en  el  modo  de  presentación  de  diapositivas  del  álbum  web  el  DISPOSITIVO  irá AUTOMÁTICAMENTE y periódicamente sincronizar su contenido con el sitio web.    Cuando un  retrato es  acrecentado al  álbum  online, el DISPOSITIVO después lo  acrecienta en  su presentación  de  diapositivas  local.  Cuando  un  retrato  es  REMOVIDO  del  álbum  online,  el DISPOSITIVO después lo removerá de su presentaci—n de diapositivas local. La actualización del DISPOSITIVO con el álbum online es completada en algunos minutos.     8. Vista de otras funcionalidades   El DISPOSITIVO incluye las siguientes œtiles funcionalidades:   - Pausa   El DISPOSITIVO usualmente exhibe los retratos como una presentación de diapositivas automática. Pero, si usted desea exhibir sólo un retrato estático, usted puede interrumpir la presentación de diapositivas  seleccionando  el  botón  Pause  del  menœ  principal.  Para  exhibir  la  presentación de diapositivas nuevamente, seleccione el ítem Play.    - Opciones diversas   Muchas  opciones  pueden  ser  modificadas  a  partir  del  ítem  Basic  info  del  menœ  Settings.  Este incluye Idioma, Transicón y Tiempo por diapositiva.    - Dispositivos Desprendibles   El DISPOSITIVO es también capaz de leer retratos guardados en una tarjeta SD   o  en  un  Disco  Amovible.  Conecte  uno  de  ellos  en  el  DISPOSITIVO,  seleccione  el  área  de almacenamiento correcta en el menú Picture Management y consulte   los directorios para encontrar aquel que incluye su retrato, entonces presione   Continúe para exhibir una presentación de diapositivas compuesta por sus retratos.    - Gerencia de retratos   El DISPOSITIVO permite que usted controle sus retratos. Entre en el menú Gestor de archivos y seleccione la memoria donde sus retratos están localizados. Después de, usted puede ejecutar una serie de acciones, como Excluir, Copiar...
  66 9. Características técnicas   Formatos soportados  Image – JPG, JPEG, BMP, PNG, GIF   Tarjeta de Memoria  SD / SDHC / MMC   USB   Puerto USB 1.1, compatible con periféricos de memoria de masa 1.1   Capacidad de Almacenamiento   1 GB   Consumo de Energía   Max. 7W   Todos los datos son proveídos como referencia sólo. El fabricante se reserva el derecho de modificar las especificaciones sin cualquier aviso previo.   10. Significado de los iconos del menú   No está conectado a la red Wi-Fi   (Compruebe la configuración de la conexion Wi-Fi o si la red Wi-Fi está disponible)    Conectado a la red Wi-Fi pero con una se–al MÍNIMA    Conectado a la red Wi-Fi con una se–al MÁXIMA    No se puede acceder a la plataforma Pix-Star®   (Normalmente sucede cuando la conexión a Internet o Wi-Fi no está activada)  Conectado a la plataforma Pix-Star®   (Listo para recibir o enviar mensajes y sincronizar álbumes web)    Notificación de que se han recibido fotos por correo electrónico en el marco Pix-Star ®  SD Tarjeta detectada y lista para ser utilizada    Dispositivo USB detectado y listo para ser utilizado
  67 11. Significado de los iconos   Enviar foto email  Siguiente photo  Reproducción  Detenerel pase de diapositivas  Foto anterior  Rotar foto  Borrar foto  Vista en miniatura  Màs opciones  Cerrar
  68 12. Frame Map Mis álbumes locales - Mio Pix-Star® frame (Inbox)  Mis álbumes web - +WEATHER+ - Arcor - Ezubi - Facebook - FlickR - Kotoo - MobileMe - Padeleon - Phanfare - Photobucket - Photo RSS - Picasa - Pix-Star® - Shutterfly - Signaelive - SmugMug - XiaoNei - WindowsLive  Gestor de archivos - My Pix-Star® - USB - Carte SD   Configuración     - Language     - Date & Time - Time zone - Auto On/Off - System - Wi-Fi     - About - Reset
  69  13. Declaración de Conformidad Nosotros, Spheris Digital Ltd., declaramos con nuestra única responsabilidad que el producto está en  conformidad  con  las  provisiones  de  la  Directriz  del  Consejo  para  Equipamientos  de  Radio  y Equipamientos de Terminales de Telecomunicaciones.   El producto es identificado con la marca CE.     Protección ambiental Es sugerido que usted retorne el producto en el fin de su vida útil a los puntos de colecta públicos para reciclaje, reutilización de dispositivos eléctricos y electrónicos.   El siguiente símbolo en el producto, en el manual de instrucciones o en el paquete indica que su marco está sujeto a la Directriz Europea 2002/96/EU.       Spheris Digital Ltd.   Info@pix-star.com      www.pix-star.com
 FCC Warning  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu