Spigen Korea F303W Fast Wireless Charger User Manual
Spigen Korea Co., Ltd. Fast Wireless Charger
User manual
F303W
Port
Specications
7. For fast charging, use a QC 2.0 or QC 3.0 adapter of 9V 1.67A.
with magnet strips or chips (IDs, credit cards, etc.)
in such
with your purchase?
• Input: DC 5V 2A or 9V 1.67A
• Radiated power: 5W, 9W
• Charge eciency: ≥70%
• Transmission distance: 0.27 inch (Max)
• Size: 7.55 × 3.3 × 0.74 inches
• Product Weight: 4.23 ounce
• Frequency: 111~205KHz
Once all parts are connected, the lights will appear
in the order below:
1. BLUE LED blinks once
2. RED LED blinks once
3. BOTH blink once
4. BOTH OFF: Standby Mode QC2.0 or QC3.0
(Fast Charger, 9V 1.67A)
LED Blue, Red
ON
LED Blue, Red
ON
Adapter
5V 2A Adapater
During charge Fully charged
LED Blue light
(Message: Wireless charging)
LED Red light
(Message: Fast Wireless charging)
LED Light Status
Charging will begin as soon as the phone is placed on
the stand and turn LED lights to reect its status as shown
in the table below.
We hope you enjoy wireless charging with your new F303W
Fast Wireless Charger! Please read this manual before using
the product and use it for future reference.
How to Connect to an AC Adapter Charging Mode
Remove
protective lm before use.
The LED light will indicate when it is on Standby Mode.
Using the F303W Fast Wireless Charger
FAST
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.