Spigen Korea K102W Wireless Keyboard Cas User Manual 15 K102W UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3034879
Application ID	/3eMh9eZjbbJrqY0XIaE8A==
Document Description	15_K102W UserMan.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	92.75kB (1159350 bits)
Date Submitted	2016-06-21 00:00:00
Date Available	2016-06-21 00:00:00
Creation Date	2015-12-10 15:36:10
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2015-12-10 15:36:10
Document Title	P130(说明书)测试(15-11-23).cdr
Document Creator	CorelDRAW
Document Author:	Administrator

Overview
Main screen/Esc
PrevTrack
Lock screen
Virtual Keyboard
Play/pause
Command
Search
NextTrack
Brightness -
Copy
Mute
Brightness +
Paste
Volume -
Cut
Volume +
Product Specifications
1) Transmit Range: up to 10 meters
2)Range of Frequency: 2402-2480MHz
3)Operating Voltage: 3.7Vdc(powered by Li-ion)
4)Operation current: <5mA
5)Standby current: 1.0mA
6)Sleep current: <0.25mA
User Guide
Wireless Keyboard
Model:K102W
Control key + spacebar key to change the
keyboard input method.
Prompted
Blue LED blinking: Pairing
Red LED on: Charging
Green LED on: Battery is fully charged
Green LED blinking: Low in Battery
FCC ID:2AFKNK102W
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
Installation Guide
Step 1.Charging the battery
1. For the first time user, Please charge the keyboard for at least 6
hours before using it. Thereafter, charge for at least 2 hours when
the battery runs low.
2. The LED (green) will blink when battery is low. The
LED (green) will stay solid when fully charged.
3. Connect the charging cable (included) to charge keyboard
including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
How to Charge the battery:
To charge the keyboard, Connect the 5V.DC input from the
keyboard into the computer USB port with the connector cable
provided. The Keyboard can function while charging.
Step 2.Pairing your Bluetooth Keyboard with your iPad/iMac/
iPhone or other Bluetooth enabled device.
The following sample shows how to pair the Bluetooth keyboard
with your iPad.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Before you can use your keyboard, you have to pair it with your iPad.
Pairing allows your keyboard to communicate wirelessly with your
iPad.You only have to perform the pairing once.
1. Turn on the keyboard and press the “
” key on the keyboard.
The LED light will blink blue. Then on the screen of the iPad, you
search for Settings-->Bluetooth.
2.Enable the Bluetooth function, and it will search for the
(4)
Bluetooth keyboard automatically. When the Bluetooth
keyboard is discovered, select the “Bluetooth keyboard”
from the ipad screen, a passkey will appear on the screen
of the iPad. Type in the passkey provided and press the
ENTER key on the keyboard. Your Bluetooth keyboard will
then be successfully paired with your iPad.
(5)
(1)
(6)
Troubleshooting
(2)
(3)
If the keyboard is not working with the iPad (or other Bluetooth
devices) make sure:
1) The Bluetooth function on the iPad (or other Bluetooth devices)
is enabled.
2) The Bluetooth keyboard is within 33 feet of the iPad.
3) The passkey is entered correctly.
4) Restart your device.
5) Make sure the keyboard is charged, recharge if low.
6) If you press the “
” button when both devices
have been connected already it will disrupt the
established connection. The keyboard will exhibit
as though it not connected with the keyboard. To
solve the issue simply restart the keyboard by
turning it OFF and then ON again. You do not need to
repair the device if it was done previously.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Create Date                     : 2015:12:10 15:36:10+08:00
Modify Date                     : 2015:12:10 15:36:10+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Author                          : Administrator
Creator                         : CorelDRAW
Title                           : P130(说明书)测试(15-11-23).cdr

EXIF Metadata provided by EXIF.tools