Spotwave Wireless SPOTCELL0008 Spotcell 100 Release 2.3 User Manual Installation letter size 2

Download:
Mirror Download [FCC.gov]
Document ID	342641
Application ID	z4ptAoWtilrqWiFSQ9rlDw==
Document Description	Coverage Extension Install Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.2kB (602468 bits)
Date Submitted	2003-07-24 00:00:00
Date Available	2003-07-24 00:00:00
Creation Date	2003-07-23 18:05:34
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-07-23 18:05:34
Document Title	Installation - letter size 2.cdr
Document Creator	PScript5.dll Version 5.2
Document Author:	Owner

™
SpotCell Coverage Extension Kit
Installation Guide
Spotwave Wireless Inc. 1 Hines Road, Ottawa ON K2K 3C7 Canada
© 2003 Spotwave Wireless Inc. All rights reserved. Printed in Canada
Spotwave and SpotCell are trademarks of Spotwave Wireless Inc. Patents pending.
www.spotwave.com
780-00009-01-01
The SpotCell Coverage Extension kit extends SpotCell
system coverage into hard to reach places that are blocked
by obstructions such as dense walls or shadowed by
elevator shafts or duct work.
1. Parts List
! Coverage Extension antenna
! Adapter cable
! coax connector
! 25m RG6 cable
RG6 cable
Coverage
Extension
antenna
DU
Adapter
cable
Auxiliary
Antenna
CU
Extension Antenna Characteristics
·
·
·
2. Coverage Extension antenna location
WARNING: The extended coverage antenna should
be mounted in locations where people will not
approach within 20 cm in front of the antenna.
Gain +3 dBi
Elevation Beamwidth 180°
Azimuth Beamwidth 175°
Antenna
Front-to-Back 12 dB
Horizontally Polarized
3. CU connection
Connect the Adapter cable to the Coverage Extension
antenna (MCX) connector on the back of the CU. The
CU can be powered and operational while connecting the
Coverage Extension antenna.
> 10 cm
> 20 cm
·
·
Coverage Extension
antenna connector
CU
The main CU and the auxillary antennas should never be co-located
side by side and facing in the same direction. The two antennas must
have a minimum of 10cm of separation when facing in opposite
direction.
The SpotCell Coverage Extension should be connected to the Coverage
Unit (CU) only after the SpotCell 100 or SpotCell 200 system has been
properly installed.
4. Adapter cable to RG6
Join the other end of the adapter cable to one end of the
provided RG6 cable with the supplied connector.
Adapter
cable
5. Connect RG6 to Coverage Extension Antenna
Connect the other end of the RG6 cable to the
F-connector on the Coverage Extension antenna.
RG6 cable
Adapter
cable
Connector
Finally, mount the Coverage Extension antenna in a
suitable location on the wall or ceiling.
LIMITED WARRANTY
Spotwave Wireless Inc. warrants to the original Purchaser that the Spotwave SpotCell Coverage Extension is free from defects in material and
workmanship under normal use and service for a period of 12 months from the date of shipment from Spotwave (the "Limited Warranty Period").

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Creation Date                   : 2003:07:23 22:05:34Z
Mod Date                        : 2003:07:23 22:05:34Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Owner
Create Date                     : 2003:07:23 22:05:34Z
Modify Date                     : 2003:07:23 22:05:34Z
Metadata Date                   : 2003:07:23 22:05:34Z
Creator                         : Owner
Title                           : Installation - letter size 2.cdr

EXIF Metadata provided by EXIF.tools