Sprout SPROUT-WS1RX Portable Wireless Outdoor/Indoor Music System User Manual CAUTION

Download:
Mirror Download [FCC.gov]
Document ID	847305
Application ID	G8yKDye+aGcJKp4pGmF4eg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.94kB (211785 bits)
Date Submitted	2007-09-25 00:00:00
Date Available	2007-09-25 00:00:00
Creation Date	2007-09-03 16:45:12
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-09-03 16:46:56
Document Title	CAUTION
Document Creator	Acrobat PDFMaker 7.0 for Word
Document Author:	robbie

Bacini acoustica
TM
Wireless Indoor / Outdoor
Music System
CAUTION
TO HELP PREVENT FIRE OR ELECTRIC SHOCK: DO NOT USE THIS (POLARIZED)
PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS
THE PLUG CAN BE FULLY INSERTED WITHOUT EXPOSING ANY PART(S) OF THE
BLADES.
This symbol is intended to alert the user to the presence of
non-insulated, “dangerous voltage” within the unit’s enclosure
that may constitute a risk of electric shock.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions.
WARNING
1. Do not disassemble the unit.
2. Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment and the warranty.
3. Do not place the speaker near heat sources such as radiators and heating vents.
4. Do not store the speaker in extreme temperatures.
5. Turn the transmitter and speaker power OFF when not in use.
6. Do not submerse the speaker in water or leave out in the rain over extended periods of
time as this may cause damage to the speaker’s performance and/or any MP3 player.
7. Do not attempt to disassemble or destroy the battery as it may cause leakage, bursting,
and could create acid spills resulting in possible burns and/or damage to the immediate
environment.
8. Do not incinerate the battery in a fire or place near heat. The battery may burst or
generate a toxic gas.
9. Do not short the battery terminals.
BATTERY PRECAUTION
1. Use only the supplied AC adapter to charge the battery. Use of other adapters may
damage the speaker circuitry and/or the rechargeable battery voiding the warranty.
2. When carrying the speaker, do not drop or collide with other objects, as this may cause
damage to the speaker and/or battery.
3. Periodically check the battery for any signs of irregularities in appearance. If there is any
indication of damage to the battery case such as cracks, deformation or leakage, replace
the battery with a new one.
4. Do not operate the speaker with a missing battery. The AC adapter requires the battery to
be in place for proper instructions.
5. Please recycle your old lead acid battery. CALL 1-800-SAV-LEAD - BATTERY
MUST BE RECYCLED.
6. Note: We recommend that you replace your battery every 3 years (36 months) to
insure proper performance.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a class B digital
Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference received, including interference that may
cause undesired operation.
CONTROLS
WIRELESS TRANSMITTER:
1.
2.
3.
4.
5.
POWER INDICATOR
POWER OFF SWITCH AND CHANNEL SELECTOR
AUDIO LEFT IN JACK
AUDIO RIGHT IN JACK
AC ADAPTER JACK
SPEAKER:
6. VOLUME 7. VOLUME +
8. BASS BOOST
9. MP3 SOURCE SWITCH
10. WIRELESS TRANSMITTER SOURCE SWITCH
11. DC INPUT JACK (RECHARGE PORT)
12. BATTERY COMPARTMENT
13. CHANNEL SELECTOR
14. SPEAKER POWER SWITCH
15. BATTERY INDICATOR
16. SPEAKER POWER INDICATOR
13
17. MP3 WEATHER RESISTANT COMPARTMENT DOOR
18. WEATHER RESISTANT COMPARTMENT LOCKING KNOB
19. 3.5MM MP3 PLUG
14
11
19
17
13
6 7 8 9 10
12
15
14
16
18
ACCESSORIES:
20. 3.5MM RCA CABLE
21. DUAL RCA CABLE
22
22. TRANSMITTER POWER
ADAPTER
23. SPEAKER POWER ADAPTER
20
21
22
23
WIRELESS TRANSMITTER SETUP AND OPERATION
The wireless transmitter may be connected two ways depending on your AUDIO SOURCE.
1. If your AUDIO SOURCE has left and right RCA output jacks, connect the transmitter by
using the DUAL RCA CABLE (#21).
2. If your AUDIO SOURCE does not have left and right output jacks, but rather a 3.5mm
headphone jack, use the 3.5MM RCA CABLE (#20) and DUAL RCA CABLE (#21) to
connect your audio source to the transmitter.
NOTE:
Wireless transmitter must be in the vertical, upright position to work properly.
Do not lay the transmitter on its side.
WIRELESS TRANSMITTER AUDIO SOURCE
1. Insert one end of the wireless TRANSMITTER POWER ADAPTER (#22) into the
transmitter’s AC ADAPTER JACK (#5) and the other end into an electrical outlet. The
transmitter’s POWER INDICATOR (#1) will illuminate.
2. Insert one end of the DUAL RCA CABLE (#21) into the appropriately colored AUDIO
IN R/L JACKS (# 4 and #3) on the back of the wireless transmitter. Connect the other
end into your AUDIO SOURCE left and right audio output jacks if you are using the
DUAL RCA CABLE (#21) or connect to the 3.5 MM plug if you are using the 3.5 MM
RCA CABLE (#20) and DUAL RCA CABLE (#21).
3. Turn on the SPEAKER POWER SWITCH (#14 – located on the inside of the MP3
WEATHER RESISTANT COMPARTMENT #17) and the speaker POWER
INDICATOR (#16) illuminates. Press the WIRELESS TRANSMITTER SOURCE
SWITCH (#10 – located on the top right of the wireless speaker control panel). Make sure
the speaker and the transmitter are set to the same channel (1, 2 or 3). 3 channels allow
you to minimize interference, check all 3 channels to find one with no interference. The
CHANNEL SELECTOR (#13) is located inside the WEATHER RESISTANT
COMPARTMENT (#17) on the speaker. The CHANNEL SELECTOR for the
WIRELESS TRANSMITTER (#2) is located on the back of the WIRELESS
TRANSMITTER.
4. You can press the VOLUME +/ VOLUME – (#7 and #6) to adjust to your desired volume.
Also, you can press the BASS BOOST (#8) to increase the bass output of the music.
Higher volume and Bass Boost will drain the battery faster then normal volume with no
Bass Boost.
NOTE:
Some 900MHz analog phones and cell phones may cause interference. For best
performance, locate the speaker as far away from the phone as possible.
MP3 PLAYER AUDIO SOURCE
You can play your MP3 player directly through your wireless indoor / outdoor speaker:
1. Open the WEATHER RESISTANT COMPARTMENT LOCKING KNOB (#18) by
turning the knob LEFT OR RIGHT. Insert 3.5MM PLUG (#19) into your MP3 player’s
3.5MM JACK, and turn on your MP3 player.
2. Select MP3 as the input (#9).
3. Press the VOLUME + (#7) / VOLUME – (#6) on your wireless speaker to adjust to your
desired listening level. Also, you can press the BASS BOOST (#8) for extra BASS effect.
NOTE:
Your MP3 player’s audio volume will also affect the volume output of your
wireless speaker. If the MP3 player’s volume is turned down to low, there will
be little to no volume on your speaker. We recommend that you set the volume
on your MP3 player to 75% of the MP3 player’s maximum volume.
SPEAKER POWER SOURCES
AC ADAPTER OR RECHARGEABLE BATTERY
AC ADAPTER POWER SOURCE
1. To use AC Adapter power source, insert one end of the SPEAKER POWER ADAPTER
(#23) into the speaker’s DC INPUT JACK (#11) and the other end into an electrical
outlet.
2. Turn on your speaker’s SPEAKER POWER SWITCH (#14) and the speaker POWER
INDICATOR (#16) will illuminate.
RECHARGE THE BATTERY
1. When the BATTERY INDICATOR (#15) flashes, that means the battery is low and needs
to be recharged.
2. Insert one end of the SPEAKER POWER ADAPTER (#23) into the DC INPUT JACK
(#11) and the other end into an electrical outlet. When the BATTERY INDICATOR (#15)
turns red, the battery is recharging. When the BATTERY INDICATOR (#15) turns off,
the battery is fully charged.
REPLACING THE SPEAKER BATTERY
1. Remove the BATTERY COMPARTMENT COVER (#12).
2. Insert a NEW SPEAKER BATTERY (12v/7AH rechargeable Lead-Acid battery)
according to polarity indicators inside the compartment.
3. Replace the BATTERY COMPARTMENT COVER.
4. Please recycle the old battery (CALL 1-800-SAV-LEAD) THE BATTERY MUST BE
RECYCLED.
NOTE:
A replacement battery is not included with your speaker. Please contact the store
where you purchased the speaker to buy a replacement rechargeable battery
when necessary. We recommend that you replace your battery every 3 years (36
months) in order to maintain proper performance.
SPECIFICATIONS
TRANSMITTER
Range: ................................................................................................................................. 150'
Fine Tuning: ............................................................................................................. Automatic
Number of Channels: ............................................................................................................. 3
Dimensions: .............................................................................. 1.5" (W) x 3.0" (L) x 3.5" (H)
Power supply: ....................................................................................... AC Adapter (included)
SPEAKER
Power On/Off: .................................................................................................................... Yes
Volume Control: ................................................................................................................. Yes
Fine Tuning: ............................................................................................................. Automatic
Speaker Unit: ................................................. One mid-high frequency driver and one woofer
Frequency Level: ............................................................................................ 50 Hz to 18k Hz
Dimensions: ............................................... ............................... 6.5" (W) x 6.5" (L) x 24" (H)
Power supply: ....................................................................................... AC Adapter (included)
..…………...…………… 12v/7AH rechargeable Lead-Acid battery (included)
Maximum Power: ........................................................................................................ 30 Watts
CARE AND MAINTENANCE
1. To clean your wireless indoor / outdoor speaker, wipe the transmitter and speaker with a
damp cloth. Do not use abrasive chemicals.
2. Remember to turn off the Speaker Power Switch (#14) when the speaker is not in use and
unplug the Speaker Power Adapter (#23) from the wall outlet.
3. Store in a cool and dry place.
1 year limited warranty
Maxwave Development Limited warrants to the original purchaser of this product, that should
the product or any part thereof be proven defective in material or workmanship within one year
from the date of original purchase, such defects will be replaced or repaired without charge for
parts or labor.
This warranty does not apply to any indirect incidental or consequential damages. The
warranty does not apply to any part or product that has been damaged by any misuse, alteration,
mishandling, negelect or accident.
This warranty is in lieu of all other warranties, expressed or implied and no person is authorized
to assume any other liabiltiy in connection with the sale of this product.
Maxwave Development Limited
940 High Street, PMB 388
Westwood, MA. 02090
For questions please contact us at:
questions@maxwavedevelopment.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Company                         : fly
Source Modified                 : D:20070813071138
Create Date                     : 2007:09:03 16:45:12+08:00
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Modify Date                     : 2007:09:03 16:46:56+08:00
Metadata Date                   : 2007:09:03 16:46:56+08:00
Document ID                     : uuid:4846348b-6a63-490d-bda6-7afeae30792e
Instance ID                     : uuid:96d48c16-fae6-4384-b541-8c987dec1363
Version ID                      : 4
Format                          : application/pdf
Title                           : CAUTION
Creator                         : robbie
Subject                         : 
Headline                        : 
Page Count                      : 8
Page Layout                     : OneColumn
Author                          : robbie

EXIF Metadata provided by EXIF.tools