Square SPB1 Square Register User Manual

Square, Inc. Square Register Users Manual

Users Manual

1455 Market Street, Suite 600, San Francisco, CA 94103 CONTRIBUTORS APPROVALSPROJECT X2 Packaging DELIVERABLE GSG - US - 16 pages INKS 1/1 + Anti-scuff Matte AQ BLACK  MATTE AQ COPYWRITING Approved ChangesCREATIVE Approved ChangesEDITING Approved ChangesLEGAL Approved ChangesLOCALIZATION Approved ChangesPMM (MARKETING) Approved ChangesIMAGING Approved ChangesCOUNTRY MANAGER Approved ChangesOTHER __________ Approved ChangesPROGRAM MANAGER Approved ChangesDESIGN Eric Manago SIZE Flat: 288mm x 144mmFolded: 144mm x 144mmPRODUCTION Jordan Lebrecht MATERIAL 130gm couchePART # M-LIT-0094 FINISHING Diecut, score, fold, staple PRODUCTION NOTESAdhesive _______Dieline _______ Pe ______REV -03 VENDOR Veritiv ChinaVERSION M08 MODIFIED August 30, 2017 2:14 PM REV NOTESREV-02 (06/17): Added 4 pages, updated content.REV-03 (08/17): Added regulatory languageFILE NAME M-LIT-0094-03_X2_GSG_16-pages_US_M09Getting Staed
1. Power adapter cable2. Power adapter3. Accessory hub 4. Customer display cable5. Mounting plate with cleat6. Mounting toolsWELCOME TO SQUARELet’s get your Square Register up and running. Sta by taking a quick look at what’s in the box.Square Register Customer DisplayCustomer display release latchPower buttonMicroUSB poMicro USB pos12Mounting plate cleat slot345 6Front Back
GET SET UP 1. Separate the customer display Remove the instructional wrap, carefully lift the customer display out of Register, and remove the protective foam pad. Place the customer display aside for now—make sure you lay it down flat.2. Connect the accessory hub to Register Simply plug the cable into one of the micro USB pos located on the bottom of Register.4. Plug it inWith the power adapter cable, plug one end into the power adapter and the other end into a power outlet.3. Connect the power adapter to the accessory hub
5. Choose a setup Docked Simply place the customer display back into its slot on Register. Press firmly on the edges of the customer display to ensure it’s locked in place. If you need to undock the customer display, hold in the release latch located on the bottom of Register and lift the customer display out. Undocked Grab the included customer display cable. Plug one end into the customer display and the other end into the bottom of Register. All set up? Learn how to create items, add your business logo to the customer display, and more at square.com/register-setup.6. Power upPress the power button on the base of the Register display until the Square logo appears on the screen.7. Sign inYou can now sign in with your Square account. If you’re new to Square, create your free account at square.com/signup. GET SET UP (CONTINUED)
HOW TO TAKE PAYMENTS DockedPosition Register so your customers can easily see the customer display and pay with their cards and devices. To take a payment, ring up the sale and tap Charge.UndockedMake sure the customer display is correctly oriented so it’s sitting horizontally on your counteop. Position the customer display so your customers can easily see it and pay with their cards and devices. To take a payment, ring up the sale and tap Charge.TapAsk your customer to hold a contactless device or card near the customer display to trigger payment. DipAsk your customer to inse a chip card into the chip card slot on the customer display and leave it in place until the sale is complete.SwipeAsk your customer to swipe a magnetic-stripe card through the magstripe reader on the customer display.TapAsk your customer to hold a contactless device or card near the customer display to trigger payment. DipAsk your customer to inse a chip card into the chip card slot on the customer display and leave it in place until the sale is complete.SwipeAsk your customer to swipe a magnetic-stripe card through the magstripe reader on the customer display.
MOUNT SQUARE REGISTER TO YOUR COUNTER WITH ADHESIVE 1. Pick a spot Using a damp cloth, clean the area where you want to secure Register. Wait for the suace to dry completely.2. Prepare the adhesive stripsGrab the mounting plate. Remove the backing from the adhesive strips located on the underside of the plate. 4. Twist and lockPlace Register onto the mounting plate with the larger screen facing right. Make sure the cleat is positioned in its slot. Turn Register 90 degrees clockwise so it locks in place. 3. Position properly Make sure the raised cleat of the mounting plate is on your side of the counter, not the customer’s side. Adhere the plate to your counter in the desired position and press down firmly for 30 seconds. Wait 30 minutes for the adhesive to set. If you need to remove the plate, slowly pull the tabs on the adhesive strips until they release.12
MOUNT SQUARE REGISTER TO YOUR COUNTER WITH SCREWS 1. Pick a spotGrab the mounting plate. Pick a spot on your counter for Register, position the plate, and use a pencil to mark the four screw holes on your counter. Make sure the raised cleat is on your side of the counter, not the customer’s side. Note: Maximum counter thickness is 2 inches (50 mm).2. Drill your counter carefullyYou need a drill and the included tools: drill bit, screws, and thumb nuts. Use the drill and drill bit to make the four holes you’ve marked for the plate. 4. Twist and lockPlace Register onto the mounting plate with the larger screen facing right. Make sure the cleat is positioned in its slot. Turn Register 90 degrees clockwise so it locks in place. 3. Position properlyPosition the mounting plate onto the holes you’ve drilled, then inse a screw into each hole. From the underside of your counter, place a thumb nut onto each screw and tighten until the thumb nut is flush against your counter.12
HOW TO USE THE ACCESSORY HUB The accessory hub gives you USB pos to connect a cash drawer, printer, or bar code scanner, and an Ethernet po if you need a wired internet connection. To learn more about setting up accessories and connecting to the internet, go to square.com/register-setup. HELP AND SUPPORT Read our FAQs, learn more about compatible hardware, and get troubleshooting suppo at square.com/register-setup. HARDWARE WARRANTY You’re covered from defects for up to two years under a limited warranty. See square.com/warranty. FREE 30DAY RETURNS Square offers a 30-day, risk-free return policy for all purchases made from square.com/shop. Simply go to square.com/returns so we can make things right. After a return is complete, a refund will be credited back to you. Ethernet poCash drawerReceipt printerOrder ticket printerBar code scannerNote: Only use the Ethernet po for connecting Square Register to the internet.
REGULATORY INFORMATIONYou can view regulatory information for Square Register by going to Settings > General > About Register > Regulatory. To view FCC information, go to Suppo > Legal > Hardware Disclaimer.This device complies with Pa 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful inteerence, and (2) this device must accept any inteerence received, including inteerence that may cause undesired operation. ACCESSORY HUB INFORMATIONHub output provides power to peripherals. Register output provides power to Square Register. © 2017 Square, Inc., 1455 Market St., Ste. 600, San Francisco, CA 94103. Square, the Square logo, and Square Register are trademarks of Square, Inc. M-LIT-0094-03

Navigation menu