Sricctv Technology SP006 IP Camera User Manual Manual

Shenzhen Sricctv Technology Co., Ltd. IP Camera Manual

Manual

0IP Camera(For PC View)User ManualSP006
1Thank you for buying our productsThis security camera can offer you the freedom to get your home or business surveillancevia network anytime and anywhere, and you do not need any special driver software, just bythe Microsoft IE, Safari, Firefox, Google Browser , your iPhone or other cell phone withAndroid system. It comes with alarm function, when somebody appears on the camera underalarm function, it will take a picture or sound the alarm and email the pictures to youimmediately. Now the product has been used in various places, such as warehouse, office,supermarket, and doorkeeper and so on. Get the security surveillance, to enjoy the home orbusiness security and the fun to watch what happened on a trip.
2Table of CONTENTS1. Product Introduction ...........................................................................................31.1. System Requirements........................................................................................31.2. Product Views……………..............................................………….................31.2.1 Front View................ ......................................................................................31.2.2 Interface View.................................................................................................41.3. Hardware Installation........................................................................................41.4. Software Installation..................................... ....................................................52. Software Operation...............................................................................................52.1. P2P ID Finder Software.............................................. ......................................52.1.1. Search The IP address of the Camera.............................................................62.1.2. Preview the camera....................... .................................................................63. Real-Time Video Demonstration................................... ......................................73.1. Camera Login.............................................................. .................. ...................83.2. View via IE Browser.........................................................................................83.3. View via Safari, Firefox, Google Browser. ......................................................123.4. Main Menu interface Introduction....... ............................................................133.5. Administrator Settings Instruction......................... ..........................................143.5.1. Multi-Device Settings....................................................................................143.5.2. PTZ Settings……………………………… ………………………...…….153.5.3. Basic Network Settings.............. ...................................................................163.5.4. Wireless Settings.......................................................... .................................163.5.5. Dynamic DNS Settings..................................................................................163.5.5.1. DDNS Service Settings….......................................................................... 163.5.5.2. Port Forwarding Settings......... ...................................................................173.5.5.3. DDNS Register........ .................. ................................................................203.5.6. Email and FTP Service Settings....................... .............................................253.5.7. Alarm Service Settings............................. .....................................................263.5.8. Local Record Path ………………............... .................................................263.5.9. Record Schedule….............................. ..........................................................283.5.10. Maintain………………................................................................................293.5.11. Back……………..........................................................................................294. Warranty...............................................................................................................30
31. Product Introduction1.1. System Requirements
41.3 Hardware InstallationFollow the steps below to set up your camera hardware. Make sure to follow each stepcarefully to ensure that the camera operates properly1. Install the Wi-Fi antenna (For wireless IP Camera) .2. Plug the power adaptor into camera3. Plug the network cable into camera, the other side to the router/switch4. It takes about 30 seconds to boot up the camera, When the camera was powered on andnetwork cable connected, the green led of the real panel will keep on, The yellow led willkeep flash.1.4 Software InstallationFigure 1.2Insert the CD to install the following software:1. Click “oPlayer.msi”—“Next”—“Install”—“Finish”.
52. Open the “P2P ID Finder” file, Click , Install the IPCamActiveX（This software is for P2P ID Finder Preview the camera）.3. P2P ID Finder: click ,The P2P ID Finder.exe will runautomatically. ( No need install. You can copy this software to your desktop.)Figure 1.32. Software operation2.1 P2P ID Finder Software2.1.1 Search the IP address , P2P ID for the camera.When the camera has been mounted properly, you double click the Icon “ ”run this P2P ID Finder software. Search the IP Address,and P2P ID.Figure 2.1Note: The software searches IP Servers automatically over LAN.There are 2 cases:
61. No IP Cameras found within LAN. After about 1 minute search, the Equipments List Fieldnot show the IP address.2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the totalnumber is displayed in the Equipments list field as shown in Figure 2.1Note：1. Current Computer indicates the Computer’s IP Address information.2. Equipment information indicates the IP camera’s IP Address information.3. If you find that the camera’s “Subnet Mask”, “Gateway”, “DNS Server” is not as someas your current computer’s, (Figure 2.2) . You need try to change the camra’s IP address.Make sure the “Subnet Mask”, “Gateway”, “DNS Server” is the same as your router’s or yourcurrent computer’s.4. If you don’t know how to configure your camera’s IP address. You can click“ ” button. The Search Tool software can help you configure a usable IPcamera automatically.Figure 2.22.1.2 Preview the camera.You can preview the camera via the P2P ID Finder software. (Before Preview the camera,you must install IPCam ActiveX.exe software.)1) Select the camera which you want to view.2) Click Video Preview.3) Sign in the user name and password of the camera.4) Click connect .Then you can view the camera video now.
73: Real-time Video Demonstration.3.1. Camera Login:You can access the camera through IP Camera Tool or IE, Firefox, Safari, GoogleChrome or other standard browser directly.1. Double click the IP address of the IP Camera listed (Figure 2.1). The default browseryou use will run automatically and come to the camera login interface. (Figure 3.1)2. To access the camera by IE Browser directly, just type the camera’s IP address andport , for example, http://192.168.1.126:81
8Figure 3.1Default username: adminPassword: NO PASSWORD.Input the correct user name and password, the Sign In interface will pop-up.There are three modes to login (figure 3.2).Figure 3.2(1) ActiveX Mode (For IE Browser): available in IE6.0 or above explorer(2) “Server Push Mode”: available in Firefox, Safari, and Google browser.(3) “No Plug-In Mode”: available in smart phone browser.3.2. View via IE Browser.Choose ActiveX Mode (For IE Browser), and sign in.
9The first time you login the camera, you will get ActiveX prompt as the picture below, pleasedownload the Ocx(or run in CD) to install, then choose Run Add-on, refreshand login the camera again, then you will see live video, details as below:Figure 3.3After Downloading Ocx-Setup (oPlayer Software), Click and install it.Figure 3.4
10Figure 3.3 Windows XP systemFigure 3.4 Win7 SystemNote: If there is still no live video after run ActiveX, please try to enable the ActiveX optionsof IE security settings, please do the follow steps:1. Close the firewall of your computer.2. Change the ActiveX settings, “IE” browser > “Tool” > “Internet Options” > “Security”>“Custom Level” > “ActiveX control and Plug-ins”, all the ActiveX options set to be“Enable”: Especially:Enable: Download unsigned ActiveX controlsEnable: Initialize and script ActiveX controls not marked as safeEnable: Run ActiveX controls and plu-insFigure 3.5
11Figure 3.6In Addition: you can also click “start” menu->“Internet Explorer”, choose “Internet attributes“ to enter, or via “Control Panel” ->“Internet Explorer”, enter to Security setting.3. If there is still no image, please close your anti-virus software, and then try step 1 & 2again.4. If you allowed the Active X running, But still could not see live video, Only a RedCross in the center of the video, And the device status light change to yellow color, not green please change another port number to try, Don’t use port 80, usd other portsuch as99, 199 etc.Figure 3.7
12NOTE: Make sure that the firewall or anti-virus software doesn’t block the software orActiveX. If you couldn’t see live video, please close your firewall or anti-virus software,and try again.3.3. View via Safari, Firefox, Google BrowserChoose Server Push Mode (For Safari, Firefox, Google Browser), and sign inServer Push Mode doesn’t support ActiveX, so some functions are not available, suchAs Record, Audio, Talk, Speaker, Zoom etc.),if you want to use these functions, please useIE Browser. The Control Interface in this mode is as bellow:3.4. Main Menu Interface IntroductionTake the “Active Mode(For IE Browser)” for example:
13Figure 3.8This button enables alarm detections. When alarm the color turn to red.This button make the camera Vertical cruise (for the Pan/Tilt Cams).This button make the camera Level cruise (for the Pan/Tilt Cams).Turn on/off IR ledsThis button flips the image vertically. This button flips the image horizontally.This setting changes the image frequency.This setting changes the image resolution.Control the speed of the Pan/tilt.This setting changes the image brightness.This setting changes the image contrast.This button for setting the Preset of the camera.
14This button opens the IP camera’s Backend Menu.This option opens the camera’s recording functionality menu.This option takes a snapshot of the current screen and saves the snapshot to the PC’sHard Disk.This option enables Camera-to-User audio. If the online user has speakers connectedand configured to their PC, clicking this option will allow them to hear audio from the locationof the camera.This option enables User-to Camera audio. If the online userThese options enable single view, quad screen view, or 9 screen view:This function serves no purpose unless you have more than one camera connected andconfigured to your interface. * Please refer to section 3.5.1 Multi-Device Settings*This option enables user video payback.3.5. Administrator Setting InstructionWhen login as administrator, you can enter the IP camera to administrate.Administrator supports all the settings and operations of the camera; you can set andcontrol it freely There are some special functions only for administrator as below:Alias settings : You can name your camera.Date&Time settings : Seting the date and time.Users settings : Can be set up to 3 users. On this page you can set up accounts of the username, password, as well as in their packets (administrator, operator, visitor).Visitor : In this mode, you can only view the camera page.Operator :You can control the PT, set the video screen’s brightness, contrast and otherparameters.Administrator : You own the highest authority.3.5.1 Multi-Device SettingsAdd a local area network equipmentIn the multi-device configuration page, you can see all the equipment inside the LAN.The first device is the default device. You can add more devices listed in the list ofequipment. Embedded applications, up to 4 devices at the same time-line. Click the “secondroad equipment” and double-click “Current list of devices in the LAN” in the device entry
15name, host address, Http port will automatically be filled, require the user to fill in the correctaccount name and password, click “Add.” Repeat this process you can continue to adddevices. Finally do not forget to click on the “Settings” button.Figure 3.9Figure 3.103.5.2 PTZ SettingsThis sector is for setting the PT function (Pan&Tilt). You can also cancel self-checkingfunction here, but you will also lose presetting bit function. PTZ speed can be adjusted here.
16Figure 3.113.5.3 Basic Network SettingsFigure 3.12This sector is for DHCP and IP configuration, port forwarding is needed, If youchoose to set IP address,please fill in the relative IP address, subnet mask, gateway, DNSserver, Http port;3.5.4 Wireless Settings1. Make sure the router is a wireless router.2. Make sure the Wi-Fi antenna installed.3. Make sure whether there is encryption of the WLAN of the router, if there is encryption,keep the key.4. Login the camera, click >“Wireless Lan Settings”>”Scan”, please scan 2times, thenyou will find the WLAN from the list, choose the one you use.5. If there is no encryption, just click “Submit”, if there is encryption, please input the key,then click “Submit”.6. Wait about 30 seconds, the camera will reboot, then unplug the network cable.
17Figure 3.133.5.5 Dynamic DNS Settings (DDNS)3.5.5.1 DDNS Setting:(1): Click > “DDNS Service Settings”.Figure 3.14(2): Choose the DDNS, there are 3 kinds of options:(1): The camera which you have bought is P2P IP Camera, Normally you didn’t need useDDNS setting part. If the P2P function is no stable locally, you can choose to register a localDDNS to support your camera with remoter control. Our camera support DynDns, 3322,9299 DDNS Server.Figure 3.15
18(2): The Third Party DDNS: This domain is provided by the 3rd party, such as DynDns. Oray,3322 If you use the third party DDNS, please choose the server you need, such as“3322.org”or“ dyndns.org” as below:Figure 3.16You have to register an account firstly, keep the user, password, host, then fill in it.Note: Only one DDNS can be chosen.3.5.5.2 Port forwarding settings:1: Setting the IP address of the cameraThe default IP address of the camera is : Http://192.168.1.99:99 The default IP address ofcamera you can change to any other one you like, such as:Change to: 192.168.1.109:109. or 192.168.1.99:90 etc.Click “Apply”>fill in the user name and password of the camera>click “OK” then the camerawill reboot, wait about 30 seconds. You will get your changed IP address.
19Figure 3.17Make sure the “Subnet Mask”, “Gateway”, “DNS Server” is the same as your router.2: Setting Port Forwarding in the router.This is the most important step. Set port forwarding in router refer to the IP of your cameracorrectly, then the DDNS will work. Because there are so many kinds of routers from all overthe world, so it’s difficult to show a fix steps, but there are some samples of different routers’port forwarding settings as below, just for reference:TP-LINK:(1) Login the router.(2) Choose “Forwarding”, select “Virtual Servers”(3) Click the Add New button, pop-up below:Fill the service port (except 80), IP address of the camera, then click SaveThe port and IP address should be the same as Camera.BELKIN:(1) Login the router.(2) Choose “Firewall”, select “Virtual Servers”(3) Input the port (except 80) and IP address, then click save.Note: The port and IP address should be the same as Camera.
20Figure 3.18DLINK:(1) Login the router.(2) Choose “Advanced”, select “Virtual Servers”(3) Input the port, IP address, Protocol, then click save.Note: The “public port” & “private port” should be the same as camera’s port, choose theprotocol to be “both”.
21Figure 3.19After all these 4 steps done, then you can use the DDNS freely, check the DDNS status fromthe camera as below, and get the link of DDNS for internet view.Step: “Login”>” ”>”Device Info”:Figure 3.203.5.5.3 DDNS RegisterFor example, you can go to Dyndns website to register a free account.http://www.dyndns.org /http://www.dyndns.com.
22Step1: enter http://www.dyndns.com/ and Create AccountFigure 3.21Step2: Set the username and password as below:Figure 3.22Step3: After a minute, you will receive a E-mail from DynDNS Support and it will giveyou a confirmation address(e.g. https://www.dyndns.com/confirm/create/ONMzltcCBk6mcHJI5MhVD0g)
23Figure 3.23Figure 3.24Step4: When the Account Confirmed, login and start using your account. Choose AddHost Services(Figure 3.25) and enter Add New Hostname (Figure 3.26)page.Figure 3.25
24Figure 3.26Step5: On the Add New Hostname page.1) input your Hostname.2) choose Host with IP address3) click Use auto detected IP address xxx.xx.xx.xxx. Then click Create Host.4) after you have added a New Hostname , you need “Proceed to checkout”Figure 3.27
25Figure 3.28Figure 3.29Step6: Now you obtained a Dynamic Domain Name(Figure3.30),and can use it in the DDNSService Settings(details: 3.5.5)Notice:If you have a dynamic IP address, Make sure you have download the DynDNS’s “UpdateClient”. And installed it succeed in your computer.Figure 3.30
263.5.6 E-mail and FTP service SettingsFigure 3.31The above setting is a preparation for the alarm function, the sender should beentered the sender’s email address，recipient 1、2、3、4 is filled with recipient E-mailaddress；SMTP server should be filled with the sender email SMTP server，e.g. thesender email address is abc@163.com，and enter mail.163.com. Generally SMTP portis 25，do no need to change；when needs to check, just tick it, and enter SMTP userand SMTP password，both of them are provided by Email provider，and test accordingto reference；when needs to send, please tick Email notification Internet IP address；The e-mail server and other information can be obtained from the mail service providerthe email notification is image captured when alarming if no email notification is neededwhen alarming, and then no need to enter.Set up FTP service, you can fill in parameters like following:Figure 3.32The above setting is equally similar to Mail Server Settings,when alarming istriggered it also sends image,please enter FTP server,FTP port,FTP user,FTPpassword, FTP upload directory,FTP mode,FTP mode has two options: PORT andPOSV. If needs a quick upload image, then select it, edit upload image interval（second）
273.5.7. Alarm Service SettingsAs shown below, there are two modes of alarm trigger, first one is motion detection,please refer to below interface，the sensitivity of motion detection can be adjustedaccording to the users′ requirement, the higher the number is, the lower sensitivityis; Another mode is input alarm, when connected, it triggers alarm through alarminput signal which connects to linkage alarm GPIO;When triggered, there are 3 alarm modes：one is IO alarm linkage, camera connectswith linkage alarm box through GPIO, sound the siren ；the second is email notification,send email with images captured；the last is upload pictures alarm，as the way mentionedbefore FTP upload pictures alarm, Upload pictures interval（second）keeps consistentwith the mentioned upload pictures interval of Ftp service settings.The schedule refers to arming time，as the selected time interval：0：00 minute perweek to 0：45 minutes and Monday 1：00 hour and 2：00 hourFigure3.333.5.8 Local Record PathThis sector is for Record&Capture Path in your computer.It include: Record&CapturePath, Record file length(MB), Record time length(Minute), Reserved disk space(MB), Recordcover.Figure 3.34
283.5.9 Record ScheduleThis sector is for SD card recording settings. When the SD card has been inserted, it willshow the capacity of the card. At first, you need to format it. It include: Recordcoverage ,Record time, Timer recording. The settings are like following:Figure 3.35You can playback the video online. Click “ ”button, choose the last sign in mode.You will see:Figure 3.363.5.10 MaintainThis sector is for maintaining your camera. Restore factory settings, Reboot device,Upgrading. Pay attention: It is risky to upgrade your camera.
29Figure 3.373.5.11 BackAfter all the settings, click here to go back to camera interface.Figure 3.38
304 WarrantyUnder normal use condition, products resulting from its own failures in the warrantyperiod will be free maintenance. Warranty Terms as following:1) Charge-free maintenance of the product is one year. We can repair it for freeduring the guarantee period (Damages not caused by misuse or vandalism). Repair overguarantee period, we will charge maintenance fee.2) During guarantee period, breakdown caused by misuse or other reasons out ofrange of warranty. You could ask repair depend on the card. We only charge for changedcomponents, the maintenance charge is free.3) When the products need maintenance, hand up the card with products to themanufacture or local distributor.4) Take apart item crust, tear up the sealing label privately, this is out of warranty range.5) We do not accept the damaged item due to modification or add other functions.The Following Circumstances will not be free warranty6) Period check, maintenance or change components due to normal attrition.7) The damages due to crash, extrusion, artificial flooding, moisture or other personalreasons.8) The damages due to floods, fire, lightning strike and other natural calamities or forcemajeure incidents factors9) Repaired item by non-authorized repair centers.All above terms, if changed, regardedto relevant regulations.THAT’S ALL, THANK YOU!
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu