Stamina Electromagnetic Resistance Elliptical 55 1779 Users Manual 1777_2
Stamina-Products-Electromagnetic-Resistance-Elliptical-55-1779-Users-Manual-528705 stamina-products-electromagnetic-resistance-elliptical-55-1779-users-manual-528705
55-1779 to the manual 2e59f59d-ad85-4f2c-9265-5430dbb79cd3
2015-02-05
: Stamina Stamina-Electromagnetic-Resistance-Elliptical-55-1779-Users-Manual-394967 stamina-electromagnetic-resistance-elliptical-55-1779-users-manual-394967 stamina pdf
Open the PDF directly: View PDF .
Page Count: 30
Download | |
Open PDF In Browser | View PDF |
Owner's Manual WARNING Exercise can present a health risk. Consult a physician before beginning any exercise program with this equipment. If you feel faint or dizzy, immediately discontinue use of this equipment. Serious bodily injury can occur if this equipment is not assembled and used correctly. Serious bodily injury can also occur if all instructions are not followed. Keep others and pets away from equipment when in use. Always make sure all bolts and nuts are tightened prior to each use. Follow all safety instructions in this manual. When calling for parts or service, please specify the following number. CAUTION: Weight on this product should not exceed 250 lbs. 55-1779 STAMINA PRODUCTS MADE IN TAIWAN Product May Vary Slightly From Pictured. This Product is Produced Exclusively by 2040 N. Alliance, Springfield, MO 65803 Customer Service 1 (800) 375-7520 2008, 05 www.staminaproducts.com 2008 Stamina Products, Inc. TABLE OF CONTENTS Page Safety Instructions Before You Begin Hardware Identification Chart Assembly Instructions Set Up Instructions Operational Instructions Storage Maintenance Computer Instructions Page Computer Trouble Shooting Guide Conditioning Guidelines Warm-up and Cool-Down Product Parts Drawing Parts List Warranty Notes Fax/Mail Ordering Form 2 4 5 6 10 11 11 11 12 21 22 23 24 25 27 28 30 SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following Safety Instructions before using the 55-1779 ELLIPTICAL. 1. Read all warnings posted on the 55-1779 ELLIPTICAL. 2. Read this Owner's Manual and follow it carefully before using the 55-1779 ELLIPTICAL. Make sure that it is properly assembled and tightened before use. 3. We recommend that two people be available for assembly of this product. 4. Keep children away from the 55-1779 ELLIPTICAL. Do not allow children to use or play on the 551779 ELLIPTICAL. Keep children and pets away from the 55-1779 ELLIPTICAL when it is in use. 5. It is recommended that you place this exercise equipment on an equipment mat. 6. Set up and operate the 55-1779 ELLIPTICAL on a solid level surface. Do not position the 55-1779 ELLIPTICAL on loose rugs or uneven surfaces. 7. Inspect the 55-1779 ELLIPTICAL for worn or loose components prior to use. 8. Tighten/replace any loose or worn components prior to using the 55-1779 ELLIPTICAL. 9. Consult a physician prior to commencing an exercise program. If, at any time during exercise, you feel faint, dizzy, or experience pain, stop and consult your physician. 10. Follow your physician's recommendations in developing your own personal fitness program. 11. Consult your physician before using any of the Heart Rate Control Programs (P9 to P12). See page 15 for a description of these programs. 12. Always choose the workout which best fits your physical strength and flexibility level. Know your limits and train within them. Always use common sense when exercising. 13. Do not wear loose or dangling clothing while using the 55-1779 ELLIPTICAL. 14. Never exercise in bare feet or socks; always wear correct footwear, such as running, walking, or crosstraining shoes. Be sure that they fit well, provide foot support and feature non-skid rubber soles. 15. Be careful to maintain your balance while using, mounting, dismounting, or assembling the 55-1779 ELLIPTICAL, loss of balance may result in a fall and serious bodily injury. 16. Do not use handlebars for upper body strength training. 17. Keep both feet firmly and securely on the Foot Pedals while exercising. 18. The 55-1779 ELLIPTICAL should not be used by persons weighing over 250 pounds. 19. The 55-1779 ELLIPTICAL should be used by only one person at a time. 20. The 55-1779 ELLIPTICAL is for consumer use only. It is not for use in public or semipublic facilities. WARNING: Before starting any exercise or conditioning program you should consult with your personal physician to see if you require a complete physical exam. This is especially important if you are over the age of 35, have never exercised before, are pregnant, or suffer from any illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY. 2 CALL US FIRST Customer Service 1(800) 375-7520 www.staminaproducts.com THANK YOU FOR PURCHASING THE 55-1779 ELLIPTICAL To help you get started, we have pre-assembled most of your 55-1779 ELLIPTICAL at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual. With regular workouts you will be getting your body into shape and on your way to achieving a happier and healthier lifestyle. Should you have any questions, please call our Customer Service Department toll-free number, 1 (800) 375-7520 Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time. Friday, 8:00 A.M. - 3:00 P.M., Central Time. TELEPHONE FAX ONLINE MAIL CUSTOMER SERVICE Tel: 1 (800) 375-7520 CUSTOMER SERVICE Fax: (417) 889-8064 CUSTOMER SERVICE parts@staminaproducts.com customerservice@staminaproducts.com www.staminaproducts.com STAMINA PRODUCTS, INC. ATTN: Customer Service P.O. Box 1071 Springfield, MO. 65801-1071 3 BEFORE YOU BEGIN Although Stamina constructs its products with the finest materials and uses the highest standards of manufacturing and quality control, there can sometimes be missing parts or incorrectly sized parts. If you have any questions or problems with the parts included with your 55-1779 ELLIPTICAL, please do not return the product. Contact us FIRST! If a part is missing or defective, please call us toll free at 1-800-375-7520 (in the U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday. If you would like to contact us online, go to our website at www.staminaproducts.com and access the Customer Service section. Be sure to have the name and model number of the product available when you contact us. Thank you for choosing the 55-1779 ELLIPTICAL. We take great pride in producing this quality product and hope it will provide many hours of quality exercise to make you feel better, look better and enjoy life to its fullest. Yes, it's a proven fact that a regular exercise program can improve your physical and mental health. Too often, our busy lifestyles limit our time and opportunity to exercise. The 55-1779 ELLIPTICAL provides a convenient and simple method to begin your assault on getting your body in shape and achieving a happier and healthier lifestyle. Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled. Read this manual carefully before using the 55-1779 ELLIPTICAL. Computer Left Handlebar Stationary Handlebar Hand Pulse Sensor Right Handlebar Handlebar Sleeve Water Bottle Handlebar Sleeve Pivoting Arm Upright Pedal Cap Pivoting Arm Pedal Divider Pedal Arm Pedal Arm Connector Linkage Left Cover Main Frame Endcap Pedal Divider Moving Wheel Pedal Cap Pedal Arm Connector Rear Stabilizer THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Allen Wrench (5mm) Wrench (10mm) Allen Wrench (6mm) Wrench (17mm) Combination Wrench 4 HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers, the end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws. 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 0 1/2 1 1/2 2 1/2 3 1/2 4 1/2 5 1/2 6 in. mm. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 MILLIMETERS 6 8 10 length 12 NOTICE: The length of all bolts and screws except those with flat heads is measured from below the head to the end of the bolt or screw. Flat head bolts and screws are measured from the top of the head to the end of the bolt or screw. length After unpacking the unit, open the hardware bag and make sure that you have all the following items. Some hardware may be already attached to the part. Part No. and Description Qty 65 Carriage Bolt (M8 x 1.25 x 85mm) 2 70 Screw, Round Head (M5 x 0.8 x 12mm) 6 72 Bolt, Socket Head (M6 x 1 x 35mm) 4 74 Bolt, Round Head (M6 x 1 x 50mm) 4 76 77 78 Bolt, Button Head (M8 x 1.25 x 20mm) Bolt, Button Head (M8 x 1.25 x 50mm) Bolt, Button Head (M10 x 1.25 x 55mm) 4 2 2 79 Bolt, Flat Head (M6 x 1 x 30mm) 4 83 85 86 Nylock Nut (M6 x 1) Nylock Nut (M8 x 1.25 x 8mm thick) Nylock Nut (M10 x 1.25) 8 4 2 89 Lock Washer (M8) 4 90 91 Washer (M8) Washer (M10) 6 2 5 ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.com LEFT R RIGHT STEP 1 NOTE: There is a "R" decal on one end of the REAR STABILIZER(2). Attach the REAR STABILIZER(2) onto the MAIN FRAME(1) with the "R" decal end on the right side and secure with CARRIAGE BOLTS(M8x1.25x85mm)(65), WASHERS(M8)(90), and NYLOCK NUTS(M8x1.25) (85). STEP 2 Slide the UPRIGHT SLEEVE(18) onto the UPRIGHT(3). Connect the MOTOR CONNECTION WIRE(29), SPEED SENSOR WIRE(32), and POWER WIRE(33) to UPPER CONNECTION WIRE(35). Insert the UPRIGHT(3) onto the MAIN FRAME(1) and secure with BUTTON HEAD BOLTS(M8x1.25x20mm)(76), LOCK WASHERS(M8)(89), and WASHERS(M8)(90). Slide the UPRIGHT SLEEVE(18) down to cover the bolts on the UPRIGHT(3). 6 ASSEMBLY INSTRUCTIONS STEP 3 Connect the LEFT and RIGHT PEDAL ARMS(9, 10) to the PEDAL ARM CONNECTORS(12) with BUTTON HEAD BOLTS(M10x1.25x55mm)(78), WASHERS(M10)(91), and NYLOCK NUTS(M10x1.25)(86). STEP 4 Connect the LINKAGES(11) to the LEFT and RIGHT PIVOTING ARMS(7, 8) with BUTTON HEAD BOLTS (M8x1.25x50mm)(77) and NYLOCK NUTS(M8x1.25)(85). STEP 5 Attach the PEDAL CAPS(48) onto the LEFT and RIGHT PEDAL ARMS(9, 10) with ROUND HEAD BOLTS (M6x1x50mm)(74) and NYLOCK NUTS(M6x1)(83). Slide the PEDAL DIVIDERS(49) into one of the four slots on the PEDAL CAPS(48) to fit your shoes. You may select the front or the back of the PEDAL CAPS(48) for foot placement. You will have more vertical movement in the Elliptical stride if you place your feet at the back of the PEDAL CAPS(48). CAUTION: The lip on the PEDAL CAPS(48) must face inside. The sides without a lip face outside as shown. 7 ASSEMBLY INSTRUCTIONS STEP 6 Attach the STATIONARY HANDLEBAR(4) onto the UPRIGHT(3) with FLAT HEAD BOLTS(M6x1x30mm) (79). Run the PULSE SENSOR WIRES(37) through the hole on the left side of the UPRIGHT(3) and pull out from the slot on the top of the UPRIGHT(3). STEP 7 Connect the PULSE SENSOR WIRES(37) to the connection wires on the COMPUTER(36). Plug the UPPER CONNECTION WIRE(35) into the back of the COMPUTER(36). Attach the COMPUTER(36) onto the plate on the UPRIGHT(3) with ROUND HEAD BOLTS(M5x0.8x12mm)(70). NOTE: Be careful not to damage the wires when attaching the COMPUTER(36). 8 ASSEMBLY INSTRUCTIONS L R STEP 8 There is a "L" decal on the LEFT HANDLEBAR(5), and a "R" decal on the RIGHT HANDLEBAR(6). Slide the HANDLEBAR SLEEVE(94) onto the LEFT HANDLEBAR(5). Insert the LEFT HANDLEBAR(5) into the LEFT PIVOTING ARM(7) and secure with SOCKET HEAD BOLTS(M6x1x35mm)(72) and NYLOCK NUTS(M6x1)(83). Slide the HANDLEBAR SLEEVE(94) down to cover the bolts on the LEFT HANDLEBAR (5). Repeat on the right side. STEP 9 Attach the MOUNTING BRACKET(56) onto the UPRIGHT(3) with ROUND HEAD SCREWS(M5x0.8x12mm) (70). Place the WATER BOTTLE(57) into the MOUNTING BRACKET(56). STEP 10 Connect the ADAPTER(58) into the outlet located on the base of the MAIN FRAME(1), refer to the inset drawing. Plug the cord on the ADAPTER(58) into the connector. 9 SET UP INSTRUCTIONS Place the 55-1779 ELLIPTICAL in the area where it will be used. The max. operation dimensions of 55-1779 ELLIPTICAL are approximately 64 5/8" long x 24 3/4" wide x 64 5/8" tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 7 feet long is required for safe operation of the 55-1779 ELLIPTICAL. Make sure that adequate space is available for access to and passage around the 55-1779 ELLIPTICAL. LEVELING: Adjust the LEVELING STANDS(55) under the FRONT STABILIZER on the MAIN FRAME(1) so that the Elliptical / Stepper sets on the floor without rocking. Refer the instructions below the illustration. MOVING: The 55-1779 ELLIPTICAL has a pair of MOVING WHEELS(54) built into the REAR STABILIZER(2) at the back. Grasp the FRONT STABILIZER and tip the 55-1779 ELLIPTICAL backward to move. Equipment Mat Loosen the NUTS(M8x1.25)(88) to touch the LEVELING STANDS(55). Adjust the LEVELING STANDS(55) for leveling. Tighten the NUTS (M8x1.25)(88) securely against the FRONT STABILIZER to lock the stand in position. FUNCTION INSPECTION: Visually inspect the 55-1779 ELLIPTICAL to verify that assembly is as shown in the above illustration. Check the function of the 55-1779 ELLIPTICAL. Stand on the foot pedals and place your hands at a comfortable position on the handlebars. Slowly move your highest foot forward and follow the natural path of the machine. Turn the crank slowly through one complete revolution to verify that the drive train functions properly. Use the " / " buttons on the COMPUTER(36) to select a program and verify that the Magnetic System provides different tensions. Refer to the COMPUTER INSTRUCTIONS on pages 12 to 20. CAUTION: Locate and read the WARNING LABEL(93) on the 55-1779 ELLIPTICAL. Make sure that all users read the WARNING LABEL(93). 10 OPERATIONAL INSTRUCTIONS To start using the 55-1779 ELLIPTICAL, stand on the foot pedals, grasp the handlebars, move your highest foot forward and follow the natural path of the machine. CAUTION: Do not use handlebars for upper body strength training. Start at a load level that is comfortable to familiarize yourself with the machine. Once you are comfortable start adjusting the load level to achieve the workout desired. Load Level Adjustment The load level of 55-1779 ELLIPTICAL can be changed at any time during your workout. Adjusting the load level will allow you to increase or decrease your intensity level. Forward and Reverse The 55-1779 ELLIPTICAL can be used in the forward and reverse direction to vary the muscles that you work out. This will also vary your workout helping you to stay motivated. To change directions, simply slow the pedals down until they stop and switch directions. STORAGE 1. To store the 55-1779 ELLIPTICAL simply keep it in a clean dry place. 2. The min. rest dimesions of 55-1779 ELLIPTICAL are approximately 57 1/2" long x 24 3/4" wide x 64 3/4" tall. These dimensions may vary. Please measure your 55-1779 ELLIPTICAL if exact dimensions are needed. 3. The 55-1779 ELLIPTICAL has a pair of MOVING WHEELS(54) built into the REAR STABILIZER(2) at the back. Grasp the FRONT STABILIZER and tip the 55-1779 ELLIPTICAL backward to move. MAINTENANCE The safety and integrity designed into the 55-1779 ELLIPTICAL can only be maintained when the 55-1779 ELLIPTICAL is regularly examined for damage and wear. Special attention should be given to the following: 1. Use the " / " buttons on the COMPUTER(36) to select a program and verify that the Magnetic System provides different tensions. The Magnetic System should provide many years of use. 2. Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately (1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged. 3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed. 4. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten loose nuts and bolts. 5. Replace worn or damaged components immediately and discontinue using the 55-1779 ELLIPTICAL until the repair is made. 6. Only Stamina Products supplied components shall be used to maintain/repair the 55-1779 ELLIPTICAL. 7. Keep your 55-1779 ELLIPTICAL clean by wiping with an absorbent cloth after use. 11 COMPUTER INSTRUCTIONS Your 55-1779 ELLIPTICAL utilizes a magnetic braking system to create resistance for your workout. You control the amount and pattern of this resistance by means of the advanced computer console mounted at the center of the handlebar. We recommend that you use this computer console to vary your workout from session to session and note your progress toward your fitness goals. When used regularly in this way, the computer console can become an important source of motivation and interest which will help keep you on track. BUTTONS: MODE : Press to select the function value displays of RPM, DIST, and WATT, or SPEED, ODOMETER, and CALORIES. Press and hold the button down for two seconds to reset all of the function values to zero. Personal information including age, gender, height, and weight will be kept. ENTER : Press to confirm the selected programs P1 to P16 and the values of the setting mode. START / Press to start the selected program. Press the START / STOP button to stop the program. STOP : You can press the START / STOP button again to continue to run the current program, or use " / " buttons to select a new program. Press and hold the button down for two seconds to reset all of the function values to zero. / UP : Press to select programs P1 to P16. Press to increase the values of the setting mode. Press to increase the level of the workload when running a program. / DOWN : Press to select programs P1 to P16. Press to decrease the values of the setting mode. Press to decrease the level of the workload when running a program. PULSE Press to activate the pulse recovery function after training. RECOVERY : 12 COMPUTER INSTRUCTIONS LCD DISPLAY INSTRUCTIONS Indicates the program selected has started. Indicates the program selected has stopped. You must be in STOP mode to setup the programs. Displays programs for selection during setup, from P1 to P16. Displays the selected program during exercise. Displays resistance level of the current interval of program, from 1 to 16. Indicates the gender (Male or Female) selected for the Body Fat Program. Displays flashing "0:00" for preseting the program time during setup, from 5:00 to 99:00. Displays the time during exercise, from 1 sec up to 99:59 minutes. Displays HEIGHT for input when you select the Body Fat Program, from 44 to 98 inches. Displays WEIGHT for input when you select the Body Fat Program, from 23 to 440 lbs. NOTE: Maximum body weight for user is 250 lbs. Displays the current speed, from zero to 99.9 Mile/Hr, or RPM, from 0 to 999 rpm. Press "MODE" button to select the display of SPEED or RPM. If the program time is "0:00", displays flashing "0.0" for preseting the DISTANCE of program during setup, from 1 to 999 mile. Displays the distance during exercise, from zero to 999.9 miles, or ODOMETER, from 0 to 9999 miles. Press "MODE" button to select the display of DISTANCE or ODOMETER. Displays the percentage of body fat in Body Fat Program. Displays the CALORIES burned, from zero to 999.9 Kcal, or WATT, from 0 to 999.9 watt. Press "MODE" button to select the display of CAL or WATT. NOTE: The calorie and watt readouts are an estimate for an average user. It should be used only as a comparison between workouts on this unit. Displays the BMR in Body Fat Program. (BMR is Basal Metabolic Rate. See page 18.) 13 COMPUTER INSTRUCTIONS Displays flashing "30" for preseting the AGE for programs during setup, from 10 to 99. Displays flashing "90" for preseting the TARGET HEART RATE in the Target Heart Rate Program, P9, from 60 to 220. Displays the target heart rate of programs during exercise. Displays the BMI in Body Fat Program. (BMI is Body Mass Index. See page 18.) Displays the Heart Rate, from 39 to 240 beats per minute. NOTE: You must place both of your hands on the Pulse Sensors on the handlebar to input the pulse signal. Each pulse signal will be accompanied with one " " symbol flash. If you do not place your hands correctly and 8 seconds passes without a pulse input, the computer will turn off the pulse circuit. Place your hands back on the Pulse Sensors correctly, the Heart Rate readout will appear again. Displays the BODY TYPE in Body Fat Program. (See page 18 for Body Type information.) PROGRAM DESCRIPTIONS This computer contains 16 different programs. You can preset your exercise time and the computer will divide the time into 10 intervals. If you do not set the program time in advance, the computer will use the preset value of 30 minutes. In this case, you can preset the DISTANCE for the program to count down. (P1) MANUAL MANUAL PROGRAM: P1 is a manual program allowing the user to have full manual control of the workload. Use the " " button to increase the load. Use the " " button to decrease the load. PRESET PROGRAMS: P2 to P7 are preset automatic programs. The profiles are shown on the face of the computer. Use the " " button to increase the load level of the program. Use the " " button to decrease the load level of the program. (P2) ROLLING (P3) VALLEY (P4) FAT BURN (P5) RAMP (P6) FITNESS TEST (P7) RANDOM (P8) BODY FAT BODY FAT PROGRAM: P8 is a special program designed to calculate your body fat ratio and to suggest a specific preset program profile, resistance level, and TARGET HEART RATE that are suitable for you to burn body fat during your workout. See pages 17 - 18 for details. Always try to keep your HEART RATE readout close to the TARGET HEART RATE during your workout. Use the " " button to increase the load level of the program. Use the " " button to decrease the load level of the program. 14 COMPUTER INSTRUCTIONS HEART RATE CONTROL PROGRAMS: P9 to P12 are preset automatic heart rate control programs. You must input your age and always hold the pulse sensors on the Handlebar with both hands when using the heart rate control programs. Program 9 allows you to input the TARGET HEART RATE you desire, from 60 to 220. Programs 10 to 12 offer three percentages of maximum heart rate based on your age. (P9, P10) PROGRAM 9 ( P9 ): PROGRAM 10 ( P10 ): Target Heart Rate 60% of Maximum Heart Rate PROGRAM 11 ( P11 ): PROGRAM 12 ( P12 ): 75% of Maximum Heart Rate 85% of Maximum Heart Rate (P11, P12) The program will monitor your pulse and adjust the workload automatically to keep your pulse within the zone which is plus & minus 5 Heart Beats from the target heart rate based on your age and the program that you selected. For example: If your age is 30 : The maximum heart rate is 190. If you select P10 : 60% of maximum heart rate is 114. Heart rate zone: Plus & minus 5 of 114 is 109 to 119. The program will monitor your pulse and adjust the workload automatically to keep your pulse within the heart rate zone (109 to 119) during your workout. USER SETTING PROGRAMS: P13 to P16 are the automatic programs that allows the user to manually preset each of the 10 intervals. Under STOP mode, use " / " and "ENTER" buttons to edit the program profile. The program profile will be stored in the memory after setup. You can modify the profile anytime under the STOP mode. NOTE: The changes can be stored only under STOP mode. When running a program, you still can use the " " button to increase the load level of the program. Use the " " button to decrease the load level of the program. But, these changes will not be stored in memory. (P13, P14, P15, P16) PROGRAM 13 ( P13 ): PROGRAM 14 ( P14 ): PROGRAM 15 ( P15 ): PROGRAM 16 ( P16 ): NOTE: Displays U1 to U4 for Program 13 to 16. 15 U1 U2 U3 U4 COMPUTER INSTRUCTIONS OPERATION INSTRUCTIONS The advanced computer with diversified programs allows you to control the following features: Workout Time Distance Heart Rate Control Body Fat (Except in Program 8) (Except in Program 8) (Program 9 to 12) (Program 8) Select the program that you desire and set the function values to adjust your workout. The different categories of programs operate in different ways but, the computer will guide you step by step to setup the program easily. Refer to the following list to learn what you may change in the programs. CATEGORY PROGRAM VARIABLES Manual Program P1 Time, Distance, Age Preset Program P2 ~ P7 Time, Distance, Age Body Fat Program P8 Gender, Height, Weight, Age Target Heart Rate Program P9 Time, Distance, Target H.R. Heart Rate Control Program P10 ~ P12 Time, Distance, Age User Setting Program P13 ~ P16 Time, Distance, Age, 10 Intervals NOTE: You may preset TIME or DISTANCE for a program. If you preset a value for TIME, the computer will not allow you to set DISTANCE. If you keep TIME at "0:00", the computer will flash "0.0" allowing you to input DISTANCE, use 30 minutes for the program time and time will count up from 0. A. MANUAL PROGRAM (P1) STEP 1: POWER ON Pedaling or press one of MODE, ENTER, and START / STOP buttons. STEP 2 : SELECT PROGRAM The Manual Program (P1) is always displayed first when you turn on the computer. If necessary, press " / " buttons to select the Manual Program. STEP 3: SET THE PROGRAM TIME OR DISTANCE, CALORIES, AND AGE Press the ENTER button, the TIME function mode will appear with the display flashing "0:00". Use " / " buttons to set the program time, from 1 minutes up to 99 minutes with 1 minute increments. Or, you can keep TIME as "0:00" and press the ENTER button to enter the mode to set the DISTANCE. Use " / " buttons to set the DISTANCE, from 1 mile up to 999 miles with 1 mile increments. Press the ENTER button to enter the mode to set the CALORIES. Use " / " buttons to set the CALORIES, from 10 cal. up to 9990 cal. with 10 cal. increments. Press the ENTER button to enter the mode to set the AGE. Use " / " buttons to set the AGE, from 10 up to 99 years old. Please note that although the computer is designed for children down to 10 years old, this product is not designed for children. NOTE: With the input of age, the computer will display a TARGET HEART RATE when running the program. The TARGET HEART RATE is 85% of your Maximum Heart Rate, and your Maximum Heart Rate is (220 - AGE). If your pulse is equal to or greater than the TARGET HEART RATE during workout, the value of HEART RATE will keep flashing. Please note that this is a warning for you to slow down or lower the Level of resistance. STEP 4 : START TO WORKOUT Now you are ready to begin exercising. The program will not start until you press the START/STOP button. 16 COMPUTER INSTRUCTIONS B. PRESET PROGRAMS (P2 to P7) STEP 1: POWER ON Pedaling or press one of MODE, ENTER, and START / STOP buttons. STEP 2 : SELECT PROGRAM Press " / " buttons until the desired program is displayed. STEP 3: SET THE PROGRAM TIME OR DISTANCE, CALORIES, AND AGE Press the ENTER button, the TIME function mode will appear with the display flashing "0:00". Use " / " buttons to set the program time, from 5 minutes up to 99 minutes with 1 minute increments. Or, you can keep TIME as "0:00" and press the ENTER button to enter the mode to set the DISTANCE. Use " / " buttons to set the DISTANCE, from 1 mile up to 999 miles with 1 mile increments. Press the ENTER button to enter the mode to set the CALORIES. Use " / " buttons to set the CALORIES, from 10 cal. up to 9990 cal. with 10 cal. increments. Press the ENTER button to enter the mode to set the AGE. Use " / " buttons to set the AGE, from 10 up to 99 years old. Please note that although the computer is designed for children down to 10 years old, this product is not designed for children. NOTE: With the input of age, the computer will display a TARGET HEART RATE when running the program. The TARGET HEART RATE is 85% of your Maximum Heart Rate, and your Maximum Heart Rate is (220 - AGE). If your pulse is equal to or greater than the TARGET HEART RATE during workout, the value of HEART RATE will keep flashing. Please note that this is a warning for you to slow down or lower the Level of resistance. STEP 4 : START TO WORKOUT Now you are ready to begin exercising. The program will not start until you press the START/STOP button. C. BODY FAT PROGRAM (P8) STEP 1: POWER ON Pedaling or press one of MODE, ENTER, and START / STOP buttons. STEP 2 : SELECT PROGRAM Press " / " buttons until PROGRAM 8 is displayed. STEP 3: SELECT GENDER AND INPUT YOUR HEIGHT, WEIGHT, AND AGE Press the ENTER button, the GENDER mode will appear with the display flashing " ". Use " / " buttons to display the correct gender. Press the ENTER button and use " / " buttons to set the values of your HEIGHT, WEIGHT, and AGE. After you input your age and press the ENTER button, the "PROGRAM 8" display will keep flashing. STEP 4: CALCULATE YOUR BODY FAT Press the the START/STOP button and hold the pulse sensors on the handlebar with both hands. A few seconds later, the computer will show the information for BODY FAT%, BMR, BMI, BODY TYPE, and the suitable program profile for you. Press the START/STOP button to start to workout. Now, you can see your TARGET HEART RATE. Always try to keep your HEART RATE readout close to the TARGET HEART RATE during workout. NOTE: 1. If you don't hold the pulse sensors on the handlebar with both hands properly, the pulse sensors won't be able to pick up the signals. The computer will display an error message "E3". Press the the START/STOP button and hold the pulse sensors with both hands properly to calculate again. 2. The values calculated or measured are for average people and they are for exercise purposes. They are not for medical purposes. 17 COMPUTER INSTRUCTIONS UNDERSTANDING THE READOUT INFORMATION 1. BODY FAT % Your body fat percentage is simply the percentage of fat your body contains. If you are 150 pounds and 10% fat, it means that your body consists of 15 pounds fat and 135 pounds lean body mass (bone, muscle, organ tissue, blood and everything else). General Body Fat Percentage Categories A certain amount of fat is essential to bodily Classification Women (fat %) Men (fat %) functions. Fat regulates body temperature, Essential Fat 10 - 12% 2 - 4% cushions and insulates organs and tissues and is Athletes 14 - 20% 6 - 13% the main form of the body's energy storage. The table describes body fat ranges and their Fitness 21 - 24% 14 - 17% associated categories. Acceptable 25 - 31% 18 - 25% Obese 32% plus 25% plus 2. BMI (BODY MASS INDEX) Body Mass Index is a height/weight formula used by health and weight professionals around the world to assess a person's body weight. From your body mass index number you can see if you are underweight, normal weight, overweight or obese. Under 20 (19 for women) Underweight BMI conclusions vary slightly according to gender. Here is a general summary of weight-status based on BMI. Normal Weight Between 20 and 24.99 Overweight Between 25 and 29.99 Obese Class 1 Between 30 and 34.99 Obese Class 2 Between 35 and 39.99 Extreme Obesity 40 and above 3. BMR (BASAL METABOLIC RATE) Basal Metabolic Rate is the rate at which the body burns calories to maintain normal body functions while at rest. BMR is the largest factor in determining overall metabolic rate and how many calories you need to maintain, lose or gain weight. To lose weight, you should try to eat fewer calories than your basic calorie need. In order to lose weight, calories should not be your only concern. Exercise is vital, too. 4. BODY TYPE There are 9 BODY TYPES divided according to the BODY FAT % calculated. Type 1: 5% to 9% Type 2: 10% to 14% Type 3: 15% to 19% Type 4: 20% to 24% Type 5: 25% to 29% Type 6: 30% to 34% Type 7: 35% to 39% Type 8: 40% to 44% Type 9: 45% to 50% Refer to the list to determine what body type you are. When you know which type you are and diet and exercise correctly for that type, you will make much better progress. 18 COMPUTER INSTRUCTIONS D. HEART RATE CONTROL PROGRAMS (P9 to P12) STEP 1: POWER ON Pedaling or press one of MODE, ENTER, and START / STOP buttons. STEP 2 : SELECT PROGRAM Press " / " buttons until the desired program is displayed. STEP 3: SET THE PROGRAM TIME OR DISTANCE, CALORIES, AND AGE Press the ENTER button, the TIME function mode will appear with the display flashing "0:00". Use " / " buttons to set the program time, from 1 minute up to 99 minutes with 1 minute increments. Or, you can keep TIME as "0:00" and press the ENTER button to enter the mode to set the DISTANCE. Use " / " buttons to set the DISTANCE, from 1 mile up to 999 miles with 1 mile increments. Press the ENTER button to enter the mode to set the CALORIES. Use " / " buttons to set the CALORIES, from 10 cal. up to 9990 cal. with 10 cal. increments. Press the ENTER button to enter the mode to set the AGE. Use " / " buttons to set the AGE, from 10 up to 99 years old. Please note that although the computer is designed for children down to 10 years old, this product is not designed for children. When you select the TARGET HEART RATE Program, P9, you must input a value for TARGET HEART RATE instead of AGE. When the TARGET HEART RATE display flashing, use " / " buttons to input your desired TARGET HEART RATE, from 60 up to 220 beats per minute. STEP 4 : START TO WORKOUT Press the START/STOP button to start to workout. Always hold the pulse sensors on the Handlebar with both hands. E. USER SETTING PROGRAMS (P13 to P16) STEP 1: POWER ON Pedaling or press one of MODE, ENTER, and START / STOP buttons. STEP 2 : SELECT PROGRAM Press " / " buttons until the desired program is displayed. STEP 3: SET THE PROGRAM TIME OR DISTANCE, CALORIES, AND AGE Press the ENTER button, the TIME function mode will appear with the display flashing "0:00". Use " / " buttons to set the program time, from 5 minutes up to 99 minutes with 1 minute increments. Or, you can keep TIME as "0:00" and press the ENTER button to enter the mode to set the DISTANCE. Use " / " buttons to set the DISTANCE, from 1 mile up to 999 miles with 1 mile increments. Press the ENTER button to enter the mode to set the CALORIES. Use " / " buttons to set the CALORIES, from 10 cal. up to 9990 cal. with 10 cal. increments. Press the ENTER button to enter the mode to set the AGE. Use " / " buttons to set the AGE, from 10 up to 99 years old. Please note that although the computer is designed for children down to 10 years old, this product is not designed for children. NOTE: With the input of age, the computer will display a TARGET HEART RATE when running the program. The TARGET HEART RATE is 85% of your Maximum Heart Rate, and your Maximum Heart Rate is (220 - AGE). If your pulse is equal to or greater than the TARGET HEART RATE during workout, the value of HEART RATE will keep flashing. Please note that this is a warning for you to slow down or lower the Level of resistance. STEP 4 : EDIT THE PROGRAM PROFILE Press the ENTER button, interval 1 will begin flashing. Use " / " buttons to set the load for interval 1. Press the ENTER button to proceed to the next interval. Use " / " buttons to set the load for each interval. STEP 5 : START TO WORKOUT Now you are ready to begin exercising. The program will not start until you press the START/STOP button. 19 COMPUTER INSTRUCTIONS OPERATION DESCRIPTIONS 1. To stop a running program, press the START / STOP button. In this mode, you can press the START / STOP button again to continue to run the current program. Or, you can use " / " buttons to select a new program. 2. When you complete a program, the computer will remind you with an audible alarm. You can press any button to stop the audible alarm. 3. To restart with a new program and keep your persional information, such as age, gender, height, weight, and TARGET HEART RATE for Program, P9, press and hold the MODE button down for two seconds to reset all of the function values to zero. Use " / " buttons to select a new program. 4. To reset the computer to initial mode, press and hold the START/STOP button down for two seconds to reset all of the function values to zero, and reset all personal setting values back to preset values of the computer. To restart with a new program, use " / " buttons to select a new program. 5. The computer will shut off automatically after 4 minutes of inactivity and all function values will be reset to zero. PULSE RECOVERY: The PULSE RECOVERY function measures how quickly you return to a resting pulse rate after exercising. You can use this function to measure improvement as you get into shape. The COMPUTER will monitor your pulse for 60 seconds and calculate a Pulse Recovery value from F1.0 to F6.0. F1 is best. The readout should only be used as a comparison between workouts. It can be used right after any aerobic exercise. Stop exercising before starting this function. To start the pulse recovery function, grasp the Pulse Sensors on the Stationary Handlebar, one in each hand. Your pulse will be displayed approximately five (5) seconds after the heart symbol is displayed. Then press the PULSE RECOVERY button and continue to grasp the Pulse Sensors correctly. During the pulse recovery function, only TIME and HEART RATE are working and the display will be as shown in illustration A. TIME will count down from 00:60 and the heart symbol will be blinking. When the TIME reaches 0, the COMPUTER will show your pulse recovery condition from F1.0 to F6.0. See illustration B. Press the any button to exit the pulse recovery function. NOTE: 1. You can quit the pulse recovery function at any time by pressing and hold the START/STOP button down for two seconds. 2. Once the pulse recovery function starts, the TIME will count down from 60 seconds to zero even if you remove your hands from the Pulse Sensors. If no pulse signal is available, F6.0 will displayed as the pulse recovery condition. A. B. The number in this box is the highest Heart Rate detected during the first 20 seconds of Pulse Recovery. POWER SOURCE: The computer uses the ADAPTER(58) as a power source. Use the 55-1779 ELLIPTICAL with the adapter plugged into an electrical outlet. 20 COMPUTER TROUBLE SHOOTING GUIDE PROBLEM E1 POSSIBLE CAUSE SOLUTION No speed signal Refer to the Assembly Instructions and verify all the Wire Plugs are connected FIRMLY and correctly. Magnetic System gets stuck causing excessive tension in adjustment cable and the adjustment motor does not function normally. Check Magnetic System(25) and Control Motor(29). The motor should be able to adjust the resistance of Magnetic System freely. If the Motor makes abnormal sounds and struggles to adjust the resistance, try to locate and correct the problem in the Magnetic System. It may be necessary to replace the Magnetic System. After correcting the problem, verify that the motor works correctly. Motor Problems If an unusually loud noise come from the Motor, it means gears in the motor gearbox do not mesh correctly. Reverse to adjust the resistance, and try again. If this fails, replace the Motor. lf the Motor does not move at all, reverse to adjust the resistance, and try again. If this fails, replace the Motor. E2 The LCD Screen does not display anything The Computer cannot make contact with the IC Chip. Disconnect the Adaptor. Reconnect the Adaptor to REBOOT the system. Wait two minutes then verify that the system works correctly. Remove and reinsert the IC Chip. If reinsertion fails, replace the Computer. You have the wrong Adaptor. Verify that the correct Adaptor is used. The Adaptor is not plugged in. Check that the Adaptor is correctly connected to an electrical outlet and plugged into the socket on the machine correctly. The Computer is faulty. Replace the Computer. Verify that the Sensor Magnet(31) is installed correctlly and passes in front of the Speed Sensor. The Speed Display shows 0 The Computer isn't receiving a signal from the Speed Sensor ? Verify the gap between Speed Sensor and the Magnet is 5mm or less. Verify all the Connection Wires(32, 35) are connected FIRMLY and correctly. Verify that the Connection Wires(32, 35) are not damaged. The LCD Screen Partially displays The Sensor is faulty. If all the above checks fail, then replace the Speed Sensor(32). The Computer is faulty. Replace the Computer. The connection between the Circuit Board and the LCD Membrane is loose. Gently press down on the LCD Screen, on the Computer face, if the partial display disappears, then it is a connection problem. Verify that the Circuit Board is securely fastened to the Computer Case. Retighten the Screws. Take care NOT to over tighten the Screws as this may destroy the Circuit Board. You just need to keep the Circuit Board firm, STOP tightening screws when you meet resistance. the Rubber Membranes between the Circuit Board and the LCD Screen is misaligned. You might be able to see that the LCD Screen is on a slight angle and NOT inline or parallel with the Computer Case. Open the Computer Case. Remove the Circuit Board Screws, gently remove the Circuit Board. Realign the LCD Screen and the Rubber Membrane. Reassemble the Circuit Board taking care not to bump or knock the Rubber Membrane out of alignment before the Circuit Board Screws are tight. You just need to keep the Circuit Board firm, STOP tightening screws when you meet resistance. The Computer is faulty Replace the Computer. The Computer is NOT receiving a Pulse Signal. Verify that the Pulse Sensor Wires(37) are connected FIRMLY and correctly. The Hand Pulse Sensors will NOT operate correctly if your skin is extremely dry. Moisten your hands with a little water and try again. No Hand Pulse Signal or Incorrect Hand Pulse Signal The Computer is receiving a faint or intermittent Pulse Signal. Grasp the Hand Pulse Sensors firmly and avoid moving your hands while exercising. The computer will need a few seconds to detect and display your correct pulse rate. If this does not work, try relaxing your grip on the Hand Pulse Sensors. Clean the Hand Pulse Sensors to ensure a good contact between your body and the Pulse Sensors. Remove the Hand Pulse Sensors and verify that the spade terminals are correctly attached. If the problem still exists, replace the Hand Pulse Sensors. The Computer is faulty. Replace the Computer. 21 CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive for several years or are severely overweight, start slowly and increase your workout time gradually. Increase your workout intensity gradually, too, by monitoring your heart rate while you exercise. Remember to follow these essentials: Have your doctor review your training and diet programs. Begin your training program slowly with realistic goals that have been set by you and your physician. Warm up before you exercise and cool down after you work out. Take your pulse periodically during your workout and strive to stay within a range of 60% (lower intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity and build up to higher intensity as you become more aerobically fit. If you feel dizzy or lightheaded you should slow down or stop exercising. Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise so you don’t tire too quickly. To determine if you are working out at the correct intensity, use a heart rate monitor or use the table below. For effective aerobic exercise, your heart rate should be maintained at a level between 60% and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of your target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your workout by increasing your heart rate. Measure your heart rate periodically during your workout by stopping the exercise but continuing to move your legs or walk around. Place two or three fingers on your wrist and take a six second heartbeat count. Multiply the results by ten to find your heart rate. For example, if your six second heartbeat count is 14, your heart rate is 140 beats per minute. A six second count is used because your heart rate will drop rapidly when you stop exercising. Adjust the intensity of your exercise until your heart rate is at the proper level. wrist pulse Target Heart Rate Zone Estimated by Age* Target Heart Rate Zone (55%-90% of Maximum Heart Rate) Average Maximum Heart Rate 100% 20 years 110-180 beats per minute 200 beats per minute 25 years 107-175 beats per minute 195 beats per minute 30 years 105-171 beats per minute 190 beats per minute 35 years 102-166 beats per minute 185 beats per minute 40 years 99-162 beats per minute 180 beats per minute 45 years 97-157 beats per minute 175 beats per minute 50 years 94-153 beats per minute 170 beats per minute 55 years 91-148 beats per minute 165 beats per minute 60 years 88-144 beats per minute 160 beats per minute 65 years 85-139 beats per minute 155 beats per minute 70 years 83-135 beats per minute 150 beats per minute Age * For cardiorespiratory training benefits, the American College of Sports Medicine recommends working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the maximum heart rate, the following formula was used: 220 - Age = predicted maximum heart rate 22 WARM-UP and COOL-DOWN Warm-up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump rope, and running in place Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength or aerobic training session is very important. Muscles stretch more easily at these times because of their elevated temperature, which greatly reduces the risk of injury. Stretches should be held for 15 to 30 seconds. Do not bounce. Suggested Stretching Exercises Lower Body Stretch Floor Stretch Place feet shoulder-width apart and lean forward. Keep this position for 30 seconds using the body as a natural weight to stretch the backs of the legs. DO NOT BOUNCE! When the pull on the back of the legs lessen, try a lower position gradually. While sitting on the floor, open the legs as wide as possible. Stretch the upper body toward the knee on the right leg by using your arms to pull your chest to your thighs. Hold this stretch 10 to 30 seconds. DO NOT BOUNCE! Do this stretch 10 times. Repeat the stretch with the left leg. Bent Torso Pulls Bent Over Leg Stretch While sitting on the floor, have legs apart one leg straight and one knee bent. Pull the chest down to touch the thigh on the leg that is bent and twist at the waist. Hold this position at least 10 seconds. Repeat 10 times on each side. Stand with feet shoulderwidth apart and lean forward as illustrated. Using the arms, gently pull the upper body towards the right leg. Let the head hang down. DO NOT BOUNCE! Hold the position a minimum of 10 seconds. Repeat pulling the upper body to the left leg. Do this stretch several times slowly. Remember always to check with your physician before starting any exercise program. Cool-Down The purpose of cooling down is to return the body to its normal, or near normal, resting state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to return to the heart. Your cool-down should include the stretches listed above and should be completed after each strength-training session. 23 24 BACK PRODUCT PARTS DRAWING FRONT PARTS LIST DIAGRAM# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 PART NAME Main Frame Rear Stabilizer Upright Stationary Handlebar Left Handlebar Right Handlebar Left Pivoting Arm Right Pivoting Arm Left Pedal Arm Right Pedal Arm Linkage Pedal Arm Connector Left Crank Right Crank Crank Cover Left Cover Right Cover Upright Sleeve Shaft Bearing (6004z) Washer (M20) C Ring (20mm) Pulley V-Ribbed Belt Magnetic System Eye Bolt (M6 x 1 x 35mm) Tension Bracket Cable Control Motor /w Connection Wire Motor Bracket Sensor Magnet Speed Sensor/w Connection Wire Power Wire Plug Nut Upper Connection Wire Computer Pulse Sensor Wire Pulse Sensor Plate Long Foam Grip Foam Grip Spacer Pivot Bar Bushing Large Waser (M8 x 60mm x 3t) Securing Knob Linkage Bushing Pivot Bracket Pivot Bushing Pedal Cap Pedal Divider Connector Bushing 25 QTY 1 1 1 1 1 1 1 1 1 1 2 2 1 1 2 1 1 1 1 2 2 2 1 1 1 2 2 1 1 1 1 1 1 1 1 1 2 2 1 2 2 4 2 2 4 2 2 2 2 4 PARTS LIST DIAGRAM# 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 PART NAME E Ring (17mm) Roller Bearing (6000ZZ) Moving Wheel Leveling Stand Mounting Bracket Water Bottle Adapter, Output 6VDC, 1000mA Endcap (76mm) Oval Plug / Dome Type (30mm x 60mm) Square Plug (30mm x 30mm) Round Plug (22mm) Round Plug (32mm) Round Plug (76mm) Carriage Bolt (M8 x 1.25 x 85mm) Screw, Round Head (M4 x 20mm) Screw, Round Head (M4 x 25mm) Screw, Round Head (M5 x 12mm) Screw, Round Head (M5 x 18mm) Screw, Round Head (M5 x 0.8 x 12mm) Screw, Flat Head (M5 x 0.8 x 10mm) Bolt, Socket Head (M6 x 1 x 35mm) Bolt, Round Head (M6 x 1 x 10mm) Bolt, Round Head (M6 x 1 x 50mm) Bolt, Round Head (M8 x 1.25 x 16mm) Bolt, Button Head (M8 x 1.25 x 20mm) Bolt, Button Head (M8 x 1.25 x 50mm) Bolt, Button Head (M10 x 1.25 x 55mm) Bolt, Flat Head (M6 x 1 x 30mm) Bolt, Flat Head (M8 x 1.25 x 16mm) Bolt, Hex Head (M10 x 1.25 x 90mm) Nylock Nut (M6 x 1) Nylock Nut (M8 x 1.25 x 6mm thick) Nylock Nut (M8 x 1.25 x 8mm thick) Nylock Nut (M10 x 1.25) Nut (M8 X 1.25) Flange Nut (M10 x 1.25) Lock Washer (M8) Washer (M8) Washer (M10) Washer (M17) Warning Label Handlebar Sleeve Wrench (10mm) Wrench (17mm) Allen Wrench (5mm) Allen Wrench (6mm) Combination Wrench Manual Small Flange Nut (M10 x 1.25) 26 QTY 2 2 4 2 2 1 1 1 2 2 4 2 2 2 2 4 2 1 8 6 4 4 8 4 2 6 4 2 4 4 2 10 4 8 4 2 2 4 6 4 4 1 2 1 1 1 1 1 1 2 LIMITED WARRANTY MODEL 55-1779 WARRANTY Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship under normal use, service and proper operation for a period of 90 days on the parts and three years on the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAIR, REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED BY STAMINA PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the product's use is in furtherance of a profit making enterprise, and all other use which is not for personal, family, or household purposes. To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield Missouri, USA, 65801-1071, or email us at customerservice@staminaproducts.com, or call us at 1 (800) 375-7520. If the defect is covered under this limited warranty, you will be requested to return the product or part to us for free repair or replacement at our option. NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY AVAILABLE TO YOU. In the event that the purchaser makes any claim under this limited warranty or any implied warranty, the Warrantor reserves the right to require the product to be returned for inspection, at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of the enclosed warranty registration card is not required for warranty coverage, but is merely a way of establishing the date and place of purchase. Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY IMPLIED WARRANTY. This limited warranty is the only written or express warranty given by Stamina Products, Inc. This warranty gives you specific legal rights, and you may also have other legal rights which vary from state to state. ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any such law is found to be applicable, the foregoing disclaimers and limitations of and on implied warranties and consequential and incidental damages with respect thereto shall be disregarded and shall be deemed not to have been made to the extent necessary to comply with such legal restriction. 27 NOTES 28 NOTES 29 FAX/MAIL ORDERING FORM Please do not return the product. For your convenience, Stamina's Customer Service Department can be reached by email at parts@staminaproducts.com or toll free at 1-800-375-7520 (in the U.S.). Should a part be missing or a defective part found, please call us from 7:30 A.M. to 5:00 P.M. Central Time, Monday through Thursday and 8:00 A.M. to 3:00 P.M. on Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064. Our Customer Service Department will be able to assist you with your problem and the part will be mailed directly to your house. TELEPHONE FAX ONLINE MAIL CUSTOMER SERVICE Tel: 1 (800) 375-7520 CUSTOMER SERVICE Fax: (417) 889-8064 CUSTOMER SERVICE parts@staminaproducts.com customerservice@staminaproducts.com www.staminaproducts.com STAMINA PRODUCTS, INC. ATTN: Customer Service P.O. Box 1071 Springfield, MO. 65801-1071 Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 Mr./Ms: Address: City: Apt. #: Zip Code: State: IMPORTANT : We must have your phone number in order to process the order! Phone #: ( ) Date Purchased: Model #: Purchased From: Work Phone #: ( ) IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! EXAMPLE: PART # DESCRIPTION QUANTITY 1 Rear Unit Assembly 1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2008:05:07 05:27:11+08:00 Subject : 55-1777_2 Author : NEWTON LIN Modify Date : 2008:05:07 05:27:17+08:00 XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Creator Tool : Adobe PageMaker 7.0 Format : application/pdf Title : 55-1777_2 Creator : NEWTON LIN Description : 55-1777_2 Producer : Acrobat Distiller 8.1.0 (Windows) Keywords : Document ID : uuid:b0a4bf91-53db-4192-8a2d-7b2678ef469d Instance ID : uuid:2733c840-5cd8-42d4-8514-623d95e2f7fd Page Count : 30EXIF Metadata provided by EXIF.tools