Standard Motor M1F01 Tire pressure sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1631513
Application ID	4AGgbF/wUopCMN7NQyx6FQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.82kB (22780 bits)
Date Submitted	2012-02-06 00:00:00
Date Available	2012-02-06 00:00:00
Creation Date	0000-00-00 00:00:00
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual

1—TPM Sensur Z-Seal Z-Nut 4fCap
filer:
ll
Figure 1
wnnnwc
Read and review all Instructions, illustratians and warnings ir Included
or fullnw manufacturer recummended service anii replacement
procedures before installing.
Prefessianal Installatlan anly. improper installatlnn may result in the
failure althe motorvehicle iire Pressure
Monitoring System minim") Sensor to operate preperly.
REMOVAL
1) The tlre and wheel assembly removal must he followed as outllned In
the vehicle manufacturer‘s Service Manual.
lerALumON
Pan assembly sequence ls shown In Flgure 1.
1) Insert the Valve ponlon of the TPM sensnr In the we lve hale untll
Contact ls made between seal and wheel rlm.
1) when the valve is completely inserted. maintain the sensor contact
with the wheel rim and manually screw the nut for a few turns.
a) while maintaining the sensor and valve In pasiilon, engage the
socket on the nut and run the nut down to a tarque cf 8.0 Min (71 in»
Ist.
4] The sensor is currently mnunted accarding tn the fulluwing criteria:
Seal is pressed against the outer surlaee afthe wheel rim's hale.
Sensor housing is posltloned against the rlm‘s drop well and
contacting at least In one point.
Sensor housing should not exceed file lim's hump height.
5] The tire and wheel assembly lnstallatlun must he followed as
uutlined in the vehicle manufacturel’s Service Manual.
rcc and IC Notice
Thls device complies with Part 15 of the FCC Rules and with RSS-ZlO of
industry Canada. Operation is Subject to the
iallawing twa cnnditiuns:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired opemion.
Warning: Any changes or modifications in mnstrucflon of this device
which are not expressly apnrcivecl bv the party respclnsihle for
compliance cauld void the user‘s authority to aperate the equipment.
GF10327-1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 1

EXIF Metadata provided by EXIF.tools